Document how multiple --filter flags interact in prune commands:
different filter keys are ANDed (all conditions must match), while
multiple values for the same key are ORed (any value can match).
This addresses a gap in the documentation where users could not
determine whether multiple filters were combined with AND or OR
logic, which is especially important for prune commands where
the wrong assumption could lead to unintended data removal.
Closes#5899
Signed-off-by: Yoan Wainmann <yoan@mreshet.co.il>
Changed the environment variables section description from:
"The following list of environment variables are supported by the `docker` command line:"
To:
"The following environment variables control the behavior of the `docker` command-line client:"
This makes it clearer that these variables control Docker's behavior, and uses the more precise term "command-line client" instead of "command line".
Signed-off-by: Andrew Hopp <andrew.hopp@me.com>
The --all flag description was misleading by only mentioning
intermediate images, when it actually also controls the visibility of
dangling (untagged) images.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Adds support for setting memory swap settings on Swarm services
* Adds flags `memory-swap` and `memory-swappiness` to `docker service
create` and `docker service update` commands.
* Adds compose fields `memswap_limit` and `mem_swappiness` for `docker
stack` commands.
Signed-off-by: Drew Erny <derny@mirantis.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
move the `trust` subcommands to a plugin, so that the subcommands can
be installed separate from the `docker trust` integration in push/pull
(for situations where trust verification happens on the daemon side).
make binary
go build -o /usr/libexec/docker/cli-plugins/docker-trust ./cmd/docker-trust
docker info
Client:
Version: 28.2.0-dev
Context: default
Debug Mode: false
Plugins:
buildx: Docker Buildx (Docker Inc.)
Version: v0.24.0
Path: /usr/libexec/docker/cli-plugins/docker-buildx
trust: Manage trust on Docker images (Docker Inc.)
Version: unknown-version
Path: /usr/libexec/docker/cli-plugins/docker-trust
docker trust --help
Usage: docker trust [OPTIONS] COMMAND
Extended build capabilities with BuildKit
Options:
-D, --debug Enable debug logging
Management Commands:
key Manage keys for signing Docker images
signer Manage entities who can sign Docker images
Commands:
inspect Return low-level information about keys and signatures
revoke Remove trust for an image
sign Sign an image
Run 'docker trust COMMAND --help' for more information on a command.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
follow-up to f81816ef88
We could decide to not initialize a default, and do this only when
setting a value, but this may require more changes, so doing this
as a starting-point.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit [moby@17d870b] (API v1.13, docker v1.1.0) changed the default to pause
containers during commit, keeping the behavior opt-in for older API versions.
This version-gate was removed in [moby@1b1147e] because API versions lower
than v1.23 were no longer supported.
This patch deprecates the `--pause` flag in favor of a `--no-pause` flag to
be more explicit on the default. The old `--pause` flag is marked deprecated
but still functional. Using the deprecated flag will print a warning, and an
error is produced when trying to use both the old and new flag;
docker commit --pause mycontainer
Flag --pause has been deprecated, and enabled by default. Use --no-pause to disable pausing during commit.
docker commit --pause=false mycontainer
Flag --pause has been deprecated, and enabled by default. Use --no-pause to disable pausing during commit.
docker commit --pause --no-pause mycontainer
Flag --pause has been deprecated, use --no-pause instead
conflicting options: --no-pause and --pause cannot be used together
[moby@17d870b]: https://github.com/moby/moby/commit/17d870bed5ef997c30da1e8b9843f4e84202f8d4
[moby@1b1147e]: https://github.com/moby/moby/commit/1b1147e46b732caeaed4ae365cd56ccbfdf40233
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `--kernel-memory` flag was still included to allow it to be used with
old API versions, but it's no longer supported by the kernel, and no longer
handled by OCI runtimes, so deprecating the flags.
With this patch, a deprecation warning is now produced when trying to use
the option;
docker run --kernel-memory 123b busybox
Flag --kernel-memory has been deprecated, this option is deprecated in the kernel and no longer supported
docker container create --kernel-memory 123b busybox
Flag --kernel-memory has been deprecated, and no longer supported by the kernel
31fb57e2c6434490a2892031602be20d0206d3cf0fc281ea25654c46dcb62bac
Note that cobra does not _fail_ the command when using deprecated options;
we could make this a hard failure instead, but may not be worth the effort.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
hostVar is used for the '--host' / '-H' flag to set [ClientOptions.Hosts].
The [ClientOptions.Hosts] field is a slice because it was originally shared
with the daemon config. However, the CLI only allows for a single host to
be specified.
hostVar presents itself as a "string", but stores the value in a string
slice. It produces an error when trying to set multiple values, matching
the check in [getServerHost].
[getServerHost]: https://github.com/docker/cli/blob/7eab668982645def1cd46fe1b60894cba6fd17a4/cli/command/cli.go#L542-L551
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The ClientOptions struct and related flags were inherited from the Moby
repository, where originally the CLI and Daemon used the same implementation
and had a "Common" options struct. When the CLI moved to a separate repository,
those structs were duplicated, but some daemon-specific logic remained. For
example, the daemon can be configured to listen on multiple ports and sockets
([moby@dede158]), but the CLI [can only connect to a single host][1]. The
daemon config also had to account for flags conflicting with `daemon.json`,
and use special flag-vars for this ([moby@677a6b3]).
Unfortunately, the `ClientConfig` struct became part of the public API and
is used as argument in various places, but we can remove the use of the
special flag var. This patch replaces the use of `NewNamedListOptsRef`
for a regular `StringArray`.
Unfortunately this changes the flag's type description from `list` to
`stringArray`, but we can look at changing that separately.
[moby@dede158]: https://github.com/moby/moby/commit/dede1585ee00f957e153691c464aab293c2dc469
[1]: https://github.com/moby/moby/blob/0af135e9065562e14a77439e13a29b4f1eb627a0/docker/docker.go#L191-L193
[moby@677a6b3]: https://github.com/moby/moby/commit/677a6b3506107468ed8c00331991afd9176fa0b9
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The example shows that the `--volumes` option is used, which in current
versions of docker only removes "anonymous" volumes, but preserves named
volume:
$ docker system prune -a --volumes
...
- all anonymous volumes not used by at least one container
...
But the example output showed that a named volume ("named-vol") was
deleted;
Deleted Volumes:
named-vol
Co-authored-by: Roberto Villarreal <rrjjvv@yahoo.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Plugins are not widely used, and there's no known plugins that use
content-trust. We're working on updating the authentication stack
in the CLI, and the trust implementation hinders us in making
changes, so removing parts that are not high-priority (ahead of
full deprecation of DCT).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
