Follow [Twitter's guidance](https://dev.twitter.com/rest/reference/post/media/upload-finalize) for media uploads: "If and (only if) the response of the FINALIZE command contains a processing_info field, it may also be necessary to use a STATUS command and wait for it to return success before proceeding to Tweet creation."
owntracks (tested on ios version 9.6.3/de_DE) publishes single waypoints under the topic owntracks/<user>/<device>/waypoint (singular).
owntrack publishes a waypoint export (publish) under the topic owntracks/<user>/<device>/waypoints (plural).
the owntracks component did not catch my waypoint export to mqtt, only single waypoint updates (i.e. after editing a waypoint or creating a new one). these single waypoints were rejected „because of missing or malformatted data“. when i changed the WAYPOINT_TOPIC to 'owntracks/{}/{}/waypoints', owntracks imported my published waypoint list, after i triggered it under Setting / Publish Waypoints.
* Added mqtt_statestream component
* Added tests for mqtt_statestream component
* mqtt_statestream: add test for valid new_state
* mqtt_statestream: Don't set initialized state
* mqtt_statestream: Switch to using async_track_state_change
* Cleanup
* Add HTTP Basic auth to RESTful Switch
* Remove redundant hass passing
* Initialize to current state
The state used to be None until the first periodic poll.
This commit refactors async_update so it can be used during setup as well,
allowing the state to start out with the correct value.
* Refactor turn_on/turn_off device communication
* Remove lint
* Fix Travis errors
* Adds the AirVisual air quality sensor platform
* Updated .coveragerc
* Removed some un-needed code
* Adding strangely-necessary pylint disable
* Removing a Python3.5-specific dict combiner method
* Restarting stuck coverage test
* Added units to AQI sensor (to get nice graph)
* Making collaborator-requested changes
* Removing unnecessary parameter from data object
* Adds the AirVisual air quality sensor platform
* Updated .coveragerc
* Removed some un-needed code
* Adding strangely-necessary pylint disable
* Removing a Python3.5-specific dict combiner method
* Restarting stuck coverage test
* Added units to AQI sensor (to get nice graph)
* Making collaborator-requested changes
* Removing unnecessary parameter from data object
* First draft of XKNX module for Home-Assistant
* XKNX does now take path of xknx.yaml as parameter
* small fix, telegram_received_callback has different signature
* changed method of registering callbacks of devices
* removed non async command lines from xknx
* telegram_received_cb not needed within HASS module
* updated requirements
* Configuration if XKNX should connect via Routing or Tunneling
* bumping version to 0.6.1
* small fix within xknx plugin
* bumped version
* XKNX-Switches are now BinarySensors and Logic from Sensor was moved to BinarySensor
* renamed Outlet to Switch
* pylint
* configuration of KNX lights via HASS config, yay!
* changed name of attribute
* Added configuration for xknx to switch component
* added support for sensors within hass configuration
* added support for climate within hass configuration
* Thermostat -> Climate
* added configuration support for binary_sensors
* renamed Shutter to Cover
* added configuration support for cover
* restructured file structure according to HASS requirements
* pylint
* pylint
* pylint
* pylint
* pylint
* pylint
* updated version
* pylint
* pylint
* pylint
* added setpoint support for climate devices
* devices are now in a different module
* more asyncio :-)
* pydocstyle
* pydocstyle
* added actions to binary_sensor
* allow more than one automation
* readded requirement
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* xknx now imported as local import
* hound *sigh*
* lint
* 'fixed' coverage.
* next try for getting gen_requirements_all.py working
* removed blank line
* XKNX 0.7.1 with logging functionality, replaced some print() calls with _LOGGER
* updated requirements_all.txt
* Fixes issue https://github.com/XKNX/xknx/issues/51
* https://github.com/XKNX/xknx/issues/52 added raw access to KNX bus from HASS component.
* bumped version - 0.7.3 contains some bugfixes
* bumped version - 0.7.3 contains some bugfixes
* setting setpoint within climate device has to be async
* bumped version to 0.7.4
* bumped version
* https://github.com/XKNX/xknx/issues/48 Adding HVAC support.
* pylint suggestions
* Made target temperature and set point required attributes
* renamed value_type to type within sensor configuration
* Issue https://github.com/XKNX/xknx/issues/52 : added filter functionality for not flooding the event bus.
* suggestions by pylint
* Added notify support for knx platform.
* logging error if discovery_info is None.
* review suggestions by @armills
* line too long
* Using discovery_info to notifiy component which devices should be added.
* moved XKNX automation to main level.
* renamed xknx component to knx.
* reverted change within .coveragerc
* changed dependency
* updated docstrings.
* updated version of xknx within requirements_all.txt
* moved requirement to correct position
* renamed configuration attribute
* added @callback-decorator and async_prefix.
* added @callback decorator and async_ prefix to register_callbacks functions
* fixed typo
* pylint suggestions
* added angle position and invert_position and invert_angle to cover.knx
* typo
* bumped version within requirements_all.txt
* bumped version
* Added support for HVAC controller status
* Optionally disable ssl certificate validity check.
* Fix lines too long.
* Fix formatting.
* Force build CI
* Fix "Method could be a function (no-self-use)"
* Tado Fix#8606
Handle case where 'mode' and 'fanSpeed' are missing JSON. Based on
changes in commit
https://github.com/wmalgadey/tado_component/commit/adfb608f86b8bf4c1c43e71b4067cbfe1de9ba85
* Expose hue group 0 to HA #8652
If allow_hue_groups is set expose "All Hue Lights" group for "special
group 0". This does add an additional Hue API call for every refresh
(approx 30 secs) to get the status of the special group 0 because it's
not included in the full API pull that currently occurs.
* Revert "Expose hue group 0 to HA #8652"
This reverts commit db7fe47ec7.
* Expose hue group 0 to HA #8652
If allow_hue_groups is set expose "All Hue Lights" group for "special
group 0". This does add an additional Hue API call for every refresh
(approx 30 secs) to get the status of the special group 0 because it's
not included in the full API pull that currently occurs.
* Changes per review by balloob
1) Use all_lights instead of all_lamps
2) Fix line lengths and trailing whitespace
3) Move "All Hue Lights" to GROUP_NAME_ALL_HUE_LIGHTS constant
* Make "All Hue Lights" a constant
* Fix trailing whitespace
This fixes an issue (#8554) whereby the Honeywell thermostats stopped
working after a period of hours or days. We do this by forgetting the
authorisation token that was sent back to us when we first logged in,
which causes the underlying evohomeclient library to perform the full
login procedure again.
* Bumping pythonegardia package requirement up to .18
* Updating requirements_all to reflect updated pythonegardia package .18
* Catching up with reality and updating egardia.py
Requirements_all reflects updated package requirement for python-egardia of 1.0.20
Otherwise, known services are logged, ignored are logged, but unknown -
not. Logging them is quite helpful for someone working on adding new
discovery service to NetDisco/HA, and would help to decouple NetDisco
library further: another project may use a generic NetDisco library,
and contribute new service to it, which won't be automatically supported
by HA. But logging about it would be a good hint to HA users that they
can look into supporting it.
