How a demo behaves depends on how much of a list fits on the screen, and
`just e2e` ran demos on a 150x100 screen while we record them at 120x35.
So a demo could pass the test suite and still fail partway through a
recording, and there was no way to find out short of recording it.
Give a demo the recording size when it doesn't ask for a size of its
own.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
NavigateToLine looks for its target among the lines the view has
rendered. When a list is scrolled, the view holds only the part of it
that is on screen, so the target may not be among them. For that case
the helper jumps to the top of the list and walks down instead.
That walk presses a key before it looks, so it never sees the item it
starts on, which after jumping is the first item of the list. A target
sitting there is reported as missing. The shorter the terminal, the more
of a list is scrolled out of view and the more often that walk is
needed, so this surfaced once the demos began running in a 35 line
terminal.
Check the line the walk starts on before moving off it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When running the demos at a hight of 35, as the new recording mechanism
will, this demo failed because the commits list was too small to show
both commits at the same time, and NavigateToLine has a bug that
prevents it from finding it by going to the top and pressing down until
it matches. We are going to fix that bug in the next commit for similar
future situations, but we also solve the problem here by setting the
side panels to accordion mode so that more commits are visible; this
looks better for this demo anyway.
A diff opens with a diffstat naming every file in it, right above the
diff of each of them. Selecting a commit puts that list in front of you,
naming the same files the menu of the diff's files offers, and the menu
is still the only way to any of them.
Make each of those names a link that goes to where that file's diff
begins, as picking it from the menu does. The panel keeps the focus, so
a file of the commit being read is a click away and the selection stays
on the commit.
The names are found in the output as it is written to the pane, for next
to nothing. The diffstat is git's own text whichever renderer the diff
goes through — delta, diff-so-fancy and difftastic all pass it on
untouched — and it comes first, so the scan for it ends with it and
nothing below is looked at.
The link states the name as the diffstat does, and which file that names
is worked out on the click, against the files the diff turned out to
hold. That is the point at which a name the diffstat cut off behind
"..." or compacted to the "{old => new}" form of a rename can be
recognized at all.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
n and N step through the files of a multi-file diff one at a time, which
is a long way to the far end of a commit touching a hundred files.
Bind ctrl+g to a menu of the diff's files, in the order the diff shows
them and by the paths the repo knows them by; picking one goes to where
its diff begins, exactly where stepping to it with n would have left
you. The menu filters as you type, so the file you have in mind is a few
characters away however many the commit touches.
The key works in the panel the diff belongs to as well as in the diff
itself. A commit is read from the commits panel, so being able to jump
from there saves focusing the diff and leaving it again for the next
commit; the diff scrolls to the file and the focus stays in the panel.
It is ctrl+g rather than f because a key that works in every panel has
to be free in all of them, and f is fetch in the files panel and fixup
in the commits panel.
The command applies only while the main view is showing a diff, and is
left out of the keybindings menu where it isn't: over a branch's commit
log, or while a conflicted file has given the main section over to the
merge conflicts view.
The diff is read to the end before the menu is built, as searching it
does: a file below the part that has been read is in neither the list
nor the view. Each item names its file rather than the row that file
begins at, so that a diff re-rendered while the menu is up is jumped
into at the row the file begins at now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Where a focus or a click puts the focused main view's selection is
worked out in the diff line helper; where a jump puts it is worked out
on the main view controller, though it is the same question about the
same pane. A jump asked for from anywhere else — from a panel below the
pane, or from a click on a link in the diff — has no way to reach that
answer.
Move it over. The controller keeps placeNavigationTarget as the short
way to say it for the jumps it makes itself.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
File navigation works out where the neighbouring file begins by walking
the rows itself, forwards or, more laboriously, backwards. A menu of the
diff's files needs the same rows, all of them at once.
Extract fileStarts, which answers that for the whole diff, and have
navigation pick its neighbour out of the answer. The two then agree on
where a file begins by construction, and the walk backwards over a file
goes away.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The identity of a row is reported in the repo's terms already: the pane
previewing the custom patch shows a diff of the two trees the patch was
materialized into, and the paths of those trees are mapped back to the
repo's files before anything sees them. Asking which file a row belongs
to, which file navigation does, was the one query that skipped that step
and answered with the tree's path.
Pull the mapping out of inRepoTerms so that it can be applied to a bare
path, and put filePaths through it. A menu listing the files of the diff
will want to show them by name; where a renderer states the path of each
side of a change, this also has both halves belong to one file rather
than to the two trees.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Reading a change in lazygit and saying something about it on GitHub
means finding the line again in the browser: open the pull request, find
the commit, find the file, scroll to the line. The line is already under
the cursor here.
Bind G in the focused main view, the key the commits panel opens the
pull request with, to open it at the line the selection is on. The URL
names the commits whose diff is on screen, so that the line numbers of
the diff are the ones the page shows, the file by the SHA-256 of its
repo-relative path, and the line by the side of the diff it is on: R for
the new version of the file, L for the old one, where a deleted line is.
GitHub documents none of that; the form was read off the URLs its own
pages carry.
One commit is named by its hash. A range of them is named by the commit
the range starts after and the commit it ends at, the form the chooser
above a pull request's files uses. The commit a range starts after is
the parent of its oldest commit; where the range starts where the pull
request itself does, that parent is none of the pull request's own
commits, and the keyword BASE stands for it.
Which branch's pull request that is depends on the panel beneath. The
commits panel lists the commits of the checked-out branch, the
sub-commits panel those of the branch drilled into, and the commit files
panel shows the files of a commit from either. In a stack of branches,
each with a pull request of its own, those lists include the commits of
the branches below, and each of those commits is in the pull request of
its own branch. So the command looks upwards from the commit for the
nearest head of a branch with a pull request, and takes the listed
branch if it finds none. Panels showing a diff that no pull request has
a view of don't answer, and the command isn't offered over their diffs
at all.
Neither is it offered over a diff that is not the commit's own, where
the line numbers on screen are not the ones the page shows: a diff
against another ref in diffing mode, and the custom patch, whose lines
sit at the numbers the patch gives them.
A pull request holds only the commits of its branch that are pushed, and
its pages say they can't find any other commit. So the command refuses
where a commit of the diff is not one of the pull request's. Amend a
commit in the middle of the branch, and the diffs of the commits below
it still open; the ones above it sit on hashes the remote doesn't have.
A commit from before the branch, in a main branch already, is refused
too, and so is a range of commits that reaches across the head of a
branch in a stack, since its commits are in two pull requests. Whether a
commit is pushed is known only for the upstream of the listed branch.
For a branch lower in a stack, that is right as long as the branches of
the stack are pushed together.
Only GitHub pull requests are known, since that is where the pull
request data comes from. The whole path can't be exercised headlessly:
no pull request reaches the model without a GitHub token, so the test
covers where the command is offered and the three reasons it refuses.
The URL is unit-tested instead, both the anchor of a line and the way
the commits are named, and so is the choice of a branch in a stack.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Two questions the pane answers from the panel beneath it each reach for
it themselves, guard included. Opening a line in a pull request needs it
twice more, for the branch and for the commit.
Extract sidePanelBeneath, which is also where the guard against asking
for the panel beneath an off-stack pane now belongs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A diff line carries the absolute path of its file, and both panels
acting on such a line turn it into the repo-relative one git speaks
themselves. Opening a line in a pull request needs that path too, to
name the file to GitHub by it.
Extract repoRelativePath, and have both panels use it. The files panel
gains the check for a path outside the repo that the other one had; a
path it used to pass on matches no file of the working tree either.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two panels offer a branch's pull request today, and each looks it up in
the model's map itself and builds the same disabled reason from the same
string. The focused main view is about to offer a line of the diff in
that pull request, which would make three.
Put the lookup and the disabled reason on the host helper, beside the
pull request URL it already builds, and have both panels ask it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Non-suspending graphical editors can take a moment to reach the
foreground, leaving a modified click with no visible response. Briefly
reverse the clicked row's selection bar after launching the editor so
the registered action is apparent.
Arm the flash only for a resolved diff row, keep newer clicks safe from
stale timers, and rely on suspension to clear the transient state before
terminal editors take over.
Actions that hand control to another application need visible
acknowledgement without moving a view's cursor or replacing renderer
colors. Reverse the narrow selection bar independently of selection
state, and clear transient flashes whenever the terminal UI suspends.
Clickable renderer gutters are small and unavailable on some diff rows.
Make the whole row an editor target without changing focus or selection,
including while a popup is focused.
Use both Alt and Shift because terminal mouse protocols do not deliver
either modifier consistently across Ghostty, iTerm2, and VS Code.
Bindings match modifiers exactly, so a modified press must not turn into
an unmodified drag or release halfway through the gesture. Capture the
press-time modifiers once and carry them until the button is released.
This also makes unbound modified clicks no-ops instead of silently
invoking plain-click behavior.
The selected-line keybinding and a modified click need the same path
from a rendered diff row to the editor. Give that operation an explicit
view-line argument before adding the mouse gesture.
Mouse events on views behind a popup are normally swallowed before their
bindings can run. Add an explicit early-dispatch opt-in for actions that
should remain live there, matching the phase where hyperlink clicks
already run.
A view can need repainting even when its cached wrapping is still valid.
Track that state independently so content-only flushes do not overload
tainted, whose only job is to request a viewLines rebuild.
In the staging panel it used to copy the selected text verbatim, but in
the focused main view it copies the diff lines (that's also what the
toast says), and now that the staging panel is gone, we can change the
text to make it more specific.
Generic range assertions and migrated commit tests should describe the views
they still exercise. Drop stale explorer wording so failures and test intent
no longer point contributors at UI that does not exist.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Users no longer enter separate staging or patch-building panels. Describe file
entry, pane switching, staging, and custom patch construction where those
actions now happen, and remove the deleted package from the developer guide.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Working in a diff used to mean the staging view, and this option said
whether the long lines there were wrapped. The main view does that work
now, and the option has had nothing to govern since the staging view went
away. Both panes wrap whatever they are given.
Make the option their wrap setting instead.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Hunk defaults and wrapping no longer belong to a staging panel. Rename both
public keys with automatic migration, and remove panel-era English strings so
config, UI, schema, and generated docs describe the surviving interface.
Co-Authored-By: GitHub Copilot <copilot@github.com>
The focused diff addresses patch lines by identity, so changing how much
context is rendered cannot invalidate an active patch. Remove the
explorer era refusal and prove that another line can still be toggled
correctly after the rerender.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Nothing routes to the explorer contexts after line actions and file entry
moved into the normal main pair. Delete their contexts, views, main-pair
wiring, discovery API, test drivers, and selection-state package so the
surviving diff view is the only implementation.
Their names go from the contexts a custom command may bind to as well, so
that a config still naming one is reported as the config error it now is
rather than taken as a context we simply failed to find.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Focused main views now own selection, staging, patch construction, copying,
and context-size rerenders. Remove the parallel controller/helper stack and
its refresh scopes, while retaining custom-patch reset as mode behavior.
Co-Authored-By: GitHub Copilot <copilot@github.com>
The next commit deletes the controller this lives in, while the helper
itself is still wanted: it is what makes a copied selection paste
straight into code. Move it first, so that the deletion is a deletion.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Enter and double-click should take users to the diff where line actions now
live, whether the file belongs to the working tree or a commit. Share the
existing focus, raw-fallback, and selection setup while retaining directory,
submodule, and conflict-specific behavior.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Historical file removal and the staging/custom-patch demos still entered
the old panels even though their line actions already exist in the main
diff. Preserve their prompts, timing, and downstream results while changing
only the interaction surface.
Co-Authored-By: GitHub Copilot <copilot@github.com>
The generic filter and range-selection suites already exercise their state
machines on surviving views, while focused-diff tests own range selection
and drag autoscroll. Remove only the repetitions that enter an explorer,
along with the staging-panel screen-mode test whose UI no longer survives.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Line staging remains part of several broader workflows: committing staged and
unstaged changes, bypassing hooks, and stashing only the staged part of a
file. Drive those selections through the main diff pair while preserving
their commit, focus, and exact stash-content assertions.
Co-Authored-By: GitHub Copilot <copilot@github.com>
The broad regression for combining a whole file, a hunk, a range, and
individual lines must survive the patch-building panel. Keep the side panel
for the explicit whole-file operation and drive every content selection
through the commit's focused diff.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Selecting a rename's content changes must remain distinct from selecting
the file operation itself. Build and remove that partial patch through
the focused commit diff, and keep asserting that the rename stays in its
source commit after the content change is taken out.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Removing a whole or partial patch from its source commit, and replacing
a patch when the user selects another commit, must not depend on
entering a patch-building panel. Keep those state transitions covered
through the diff that now owns patch selection.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Applying and reverse-applying custom patches must keep their staging,
dirty-worktree, and conflict behavior after the patch-building panel is
removed. Select the source lines in commit diffs while retaining every
assertion about the resulting working tree and conflict resolution.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Editing a line whose working-tree position shifted, discarding part of
an added file, and giving up a patch by escaping are all behavior worth
retaining. Drive them through the focused commit diff so their coverage
no longer depends on the patch-building panel.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Line-level patch moves must keep their behavior for added and deleted
files, adjacent additions, stacked branches, and conflicting earlier
destinations. Select those lines directly in the focused diff so only
the intended changes move and file-level metadata stays with the source
when appropriate.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Moving a complete patch must preserve each file operation whether its
destination is a new commit before or after the source, or an existing
commit earlier or later in history. Build those patches as ranges over
the focused diff so the coverage survives removal of directory toggling
in the patch builder.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Conflict and dirty-worktree handling happen after a custom patch is
built, but their tests must no longer rely on either explorer to build
it. Select whole and partial patches in the commit diff while preserving
the rebase-conflict and stash-restoration assertions.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Patch movement still needs coverage for partial modifications, adjacent
additions, custom diff settings, and selections spanning files after the
patch-building panel goes away. Drive each through diff-line identities
while keeping the resulting commit and index assertions unchanged.
Co-Authored-By: GitHub Copilot <copilot@github.com>
A focused diff must replace the patch builder's whole-file toggle
without losing file creation or deletion metadata. Ordinary modifications
and renames must remain line-level selections even when every changed
content line is selected.
Ask the patch builder's canonical raw diff whether it consists of one
hunk containing only additions or only deletions and no context. Use the
whole-file operation only when the selection also covers every change.
Co-Authored-By: GitHub Copilot <copilot@github.com>
The patch-building panel could move an added file as a file, while
selecting every visible change through the focused diff currently moves
only its content and leaves the empty file behind. Keep the intended
index state beside the current one so the replacement flow demonstrates
that gap before it is fixed.
Co-Authored-By: GitHub Copilot <copilot@github.com>
The commit rewrite triggered by moving a custom patch must keep the
user's place without relying on the patch-building panel. Build the
patch and leave the affected range selected in the focused diff so the
regression test follows the UI that survives this branch.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Removing the staging panel must not lose the handoff that happens when a
file's final change disappears. Drive that behavior through the focused
main view so the test continues to require focus and selection to follow
the files panel onto the next diff.
Co-Authored-By: GitHub Copilot <copilot@github.com>
Keeping the same staging interactions covered through the explorer would
pin the suite to the panel that this branch removes. The focused main
view now owns line, range, hunk, navigation, search, context-size, and
rapid-input coverage.
Co-Authored-By: GitHub Copilot <copilot@github.com>
