Merge pull request #7418 from vvoland/7417-29.x

[29.x] Update to go1.26.10

.github/workflows/build.yml

@@ -68,7 +68,7 @@ jobs:
         uses: docker/setup-buildx-action@f87e5991a6d7451dcb8d9637bfbc97413f497069 # v4.4.1
       -
         name: Build
-        uses: docker/bake-action@59cb1203cd42bcefd40a1b6d73b589e48c86040e # v7.5.0
+        uses: docker/bake-action@018cb6412ab401ebaa809aa5f85966b74628600f # v7.4.0
         with:
           targets: ${{ matrix.target }}
           set: |
@@ -99,7 +99,7 @@ jobs:
 
   bin-image:
     if: ${{ github.event_name != 'pull_request' && github.repository == 'docker/cli' }}
-    uses: docker/github-builder/.github/workflows/bake.yml@a31d2311da4d55e21b978c1c52bab82ba97d51ee # v1.19.0
+    uses: docker/github-builder/.github/workflows/bake.yml@58cb9f5b71b1836d6f690c1e95effdeb9b98cb8a # v1.17.0
     permissions:
       contents: read # same as global permission
       id-token: write # for signing attestation(s) and authenticating to Docker Hub with GitHub OIDC Token
@@ -159,7 +159,7 @@ jobs:
         uses: docker/setup-buildx-action@f87e5991a6d7451dcb8d9637bfbc97413f497069 # v4.4.1
       -
         name: Build
-        uses: docker/bake-action@59cb1203cd42bcefd40a1b6d73b589e48c86040e # v7.5.0
+        uses: docker/bake-action@018cb6412ab401ebaa809aa5f85966b74628600f # v7.4.0
         with:
           targets: plugins-cross
           set: |

.github/workflows/codeql.yml

@@ -64,18 +64,18 @@ jobs:
         name: Update Go
         uses: actions/setup-go@b7ad1dad31e06c5925ef5d2fc7ad053ef454303e # v7.0.0
         with:
-          go-version: "1.27.4"
+          go-version: "1.26.10"
           cache: false
       -
         name: Initialize CodeQL
-        uses: github/codeql-action/init@33d7b85da1a04171e211befe2c739303b9a4c066 # v4.39.3
+        uses: github/codeql-action/init@2892aa5e19bbd11bc0cff5427e3b750a04d9e3c2 # v4.38.2
         with:
           languages: go
       -
         name: Autobuild
-        uses: github/codeql-action/autobuild@33d7b85da1a04171e211befe2c739303b9a4c066 # v4.39.3
+        uses: github/codeql-action/autobuild@2892aa5e19bbd11bc0cff5427e3b750a04d9e3c2 # v4.38.2
       -
         name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@33d7b85da1a04171e211befe2c739303b9a4c066 # v4.39.3
+        uses: github/codeql-action/analyze@2892aa5e19bbd11bc0cff5427e3b750a04d9e3c2 # v4.38.2
         with:
           category: "/language:go"

.github/workflows/e2e.yml

@@ -26,9 +26,6 @@ on:
 
 jobs:
   tests:
-    permissions:
-      contents: read
-      id-token: write # needed for CodeCov; https://github.com/codecov/codecov-action/blob/v7.1.1/README.md#using-oidc
     runs-on: ubuntu-26.04
     strategy:
       fail-fast: false
@@ -83,4 +80,4 @@ jobs:
         uses: codecov/codecov-action@303a32d7a59b442fa8d48b6a1cc6825c09c847a5 # v7.1.1
         with:
           files: ./build/coverage/coverage.txt
-          use_oidc: true
+          token: ${{ secrets.CODECOV_TOKEN }}

.github/workflows/pr-review.yml

@@ -11,7 +11,7 @@ permissions:
 
 jobs:
   review:
-    uses: docker/docker-agent-action/.github/workflows/review-pr.yml@aaa657c53cc69ed15683cd8a985d86663a0e1594 # v2.1.0
+    uses: docker/docker-agent-action/.github/workflows/review-pr.yml@3654ec391b070e247de2e2e3c1ff2519b6378b3a # v2.0.9
     permissions:
       contents: read # Read repository files and PR diffs
       pull-requests: write # Post review comments

.github/workflows/test.yml

@@ -26,9 +26,6 @@ on:
 
 jobs:
   ctn:
-    permissions:
-      contents: read
-      id-token: write # needed for CodeCov; https://github.com/codecov/codecov-action/blob/v7.1.1/README.md#using-oidc
     runs-on: ubuntu-26.04
     steps:
       -
@@ -36,7 +33,7 @@ jobs:
         uses: docker/setup-buildx-action@f87e5991a6d7451dcb8d9637bfbc97413f497069 # v4.4.1
       -
         name: Test
-        uses: docker/bake-action@59cb1203cd42bcefd40a1b6d73b589e48c86040e # v7.5.0
+        uses: docker/bake-action@018cb6412ab401ebaa809aa5f85966b74628600f # v7.4.0
         with:
           targets: test-coverage
       -
@@ -44,12 +41,9 @@ jobs:
         uses: codecov/codecov-action@303a32d7a59b442fa8d48b6a1cc6825c09c847a5 # v7.1.1
         with:
           files: ./build/coverage/coverage.txt
-          use_oidc: true
+          token: ${{ secrets.CODECOV_TOKEN }}
 
   host:
-    permissions:
-      contents: read
-      id-token: write # needed for CodeCov; https://github.com/codecov/codecov-action/blob/v7.1.1/README.md#using-oidc
     runs-on: ${{ matrix.os }}
     env:
       GOPATH: ${{ github.workspace }}
@@ -59,9 +53,9 @@ jobs:
       fail-fast: false
       matrix:
         os:
+          - macos-14        # macOS 14 on arm64 (Apple Silicon M1)
+          - macos-15-intel  # macOS 15 on Intel
           - macos-15        # macOS 15 on arm64 (Apple Silicon M1)
-          - macos-26        # macOS 26 on arm64 (Apple Silicon M1)
-          - macos-26-intel  # macOS 26 on Intel
 #          - windows-2022 # FIXME: some tests are failing on the Windows runner, as well as on Appveyor since June 24, 2018: https://ci.appveyor.com/project/docker/cli/history
     steps:
       -
@@ -74,7 +68,7 @@ jobs:
         name: Set up Go
         uses: actions/setup-go@b7ad1dad31e06c5925ef5d2fc7ad053ef454303e # v7.0.0
         with:
-          go-version: "1.27.4"
+          go-version: "1.26.10"
           cache: false
       -
         name: Test
@@ -92,4 +86,4 @@ jobs:
         with:
           files: /tmp/coverage.txt
           working-directory: ${{ env.GOPATH }}/src/github.com/docker/cli
-          use_oidc: true
+          token: ${{ secrets.CODECOV_TOKEN }}

.github/workflows/validate.yml

@@ -38,7 +38,7 @@ jobs:
     steps:
       -
         name: Run
-        uses: docker/bake-action@59cb1203cd42bcefd40a1b6d73b589e48c86040e # v7.5.0
+        uses: docker/bake-action@018cb6412ab401ebaa809aa5f85966b74628600f # v7.4.0
         with:
           targets: ${{ matrix.target }}
 
@@ -101,7 +101,7 @@ jobs:
         name: Set up Go
         uses: actions/setup-go@b7ad1dad31e06c5925ef5d2fc7ad053ef454303e # v7.0.0
         with:
-          go-version: "1.27.4"
+          go-version: "1.26.10"
           cache: false
       -
         name: Run gocompat check

.golangci.yml

@@ -5,7 +5,7 @@ run:
   # which causes it to fallback to go1.17 semantics.
   #
   # TODO(thaJeztah): update "usetesting" settings to enable go1.24 features once our minimum version is go1.24
-  go: "1.27.4"
+  go: "1.26.10"
 
   timeout: 5m
 
@@ -201,6 +201,11 @@ linters:
         linters:
           - gosec
 
+        # TODO: make sure all packages have a description. Currently, there's 67 packages without.
+      - text: "package-comments: should have a package comment"
+        linters:
+          - revive
+
         # Exclude some linters from running on tests files.
       - path: _test\.go
         linters:
@@ -222,6 +227,11 @@ linters:
         linters:
           - staticcheck
 
+      # TODO(thaJeztah): remove once https://github.com/leighmcculloch/gocheckcompilerdirectives/issues/7 is fixed.
+      - text: "compiler directive unrecognized: //go:fix"
+        linters:
+          - gocheckcompilerdirectives
+
     # Log a warning if an exclusion rule is unused.
     # Default: false
     warn-unused: true

Dockerfile

@@ -5,12 +5,10 @@ ARG BASE_VARIANT=alpine
 # ALPINE_VERSION sets the version of the alpine base image to use, including for the golang image.
 # It must be a supported tag in the docker.io/library/alpine image repository
 # that's also available as alpine image variant for the Golang version used.
-ARG ALPINE_VERSION=3.24
+ARG ALPINE_VERSION=3.23
+ARG BASE_DEBIAN_DISTRO=bookworm
 
-# BASE_DEBIAN_DISTRO sets the version of the debian base image to use,
-ARG BASE_DEBIAN_DISTRO=trixie
-
-ARG GO_VERSION=1.27.4
+ARG GO_VERSION=1.26.10
 
 # XX_VERSION specifies the version of the xx utility to use.
 # It must be a valid tag in the docker.io/tonistiigi/xx image repository.
@@ -27,12 +25,12 @@ ARG GOTESTSUM_VERSION=v1.13.0
 # BUILDX_VERSION sets the version of buildx to use for the e2e tests.
 # It must be a tag in the docker.io/docker/buildx-bin image repository
 # on Docker Hub.
-ARG BUILDX_VERSION=0.38.2
+ARG BUILDX_VERSION=0.38.0
 
 # COMPOSE_VERSION is the version of compose to install in the dev container.
 # It must be a tag in the docker.io/docker/compose-bin image repository
 # on Docker Hub.
-ARG COMPOSE_VERSION=v5.7.0
+ARG COMPOSE_VERSION=v5.6.0
 
 FROM --platform=$BUILDPLATFORM tonistiigi/xx:${XX_VERSION} AS xx
 
@@ -55,7 +53,7 @@ WORKDIR /go/src/github.com/docker/cli
 
 FROM build-base-debian AS build-debian
 ARG TARGETPLATFORM
-RUN xx-apt-get install --no-install-recommends -y libc6-dev libgcc-14-dev pkgconf
+RUN xx-apt-get install --no-install-recommends -y libc6-dev libgcc-12-dev pkgconf
 
 FROM build-base-${BASE_VARIANT} AS goversioninfo
 ARG GOVERSIONINFO_VERSION

VERSION

@@ -1 +1 @@
-29.10.0
+29.9.2

cli-plugins/plugin/plugin.go

@@ -10,7 +10,6 @@ import (
 	"fmt"
 	"os"
 	"sync"
-	"time"
 
 	"github.com/docker/cli/cli"
 	"github.com/docker/cli/cli-plugins/metadata"
@@ -33,11 +32,6 @@ import (
 // called.
 var PersistentPreRunE func(*cobra.Command, []string) error
 
-// finalizeHookTimeout is the timeout given for running the finalize hook.
-// It contains the timeout for exporting metrics and a little bit extra in case
-// shutdown does not respond to the export timeout promptly.
-const finalizeHookTimeout = command.ExportTimeout + 10*time.Millisecond
-
 // RunPlugin executes the specified plugin command
 func RunPlugin(dockerCli *command.DockerCli, plugin *cobra.Command, meta metadata.Metadata) error {
 	tcmd := newPluginCommand(dockerCli, plugin, meta)
@@ -75,7 +69,6 @@ func RunPlugin(dockerCli *command.DockerCli, plugin *cobra.Command, meta metadat
 				stopInstrumentation(err)
 				return err
 			}
-			cobra.OnFinalize(func() { finalizeHook(dockerCli) })
 		})
 		return retErr
 	}
@@ -90,59 +83,6 @@ func RunPlugin(dockerCli *command.DockerCli, plugin *cobra.Command, meta metadat
 	return cmd.Execute()
 }
 
-// finalizeHook is a hook to be run when the CLI has finished executing the run command.
-// This happens after any post run methods but also always runs even when an error happens.
-func finalizeHook(dockerCli *command.DockerCli) {
-	// Use a new context for the export so that the command being cancelled
-	// doesn't affect the metrics, and we get metrics for cancelled commands.
-	ctx, cancel := context.WithTimeout(context.Background(), command.ExportTimeout)
-	defer cancel()
-
-	var (
-		wg   sync.WaitGroup
-		wait bool
-	)
-	if tp, ok := dockerCli.TracerProvider().(command.TracerProvider); ok {
-		wg.Go(func() {
-			if err := tp.Shutdown(ctx); err != nil {
-				otel.Handle(err)
-			}
-		})
-		wait = true
-	}
-
-	if mp, ok := dockerCli.MeterProvider().(command.MeterProvider); ok {
-		wg.Go(func() {
-			if err := mp.Shutdown(ctx); err != nil {
-				otel.Handle(err)
-			}
-		})
-		wait = true
-	}
-
-	// Wait for the wait group in another goroutine if any were created.
-	if !wait {
-		return
-	}
-
-	// Spawn a goroutine to wait for the wait group.
-	// If the shutdown does not promptly hang up with the
-	// cancellation of the context, we leave this goroutine
-	// orphaned so the process can exit.
-	done := make(chan struct{})
-	go func() {
-		defer close(done)
-		wg.Wait()
-	}()
-
-	select {
-	case <-done:
-	case <-time.After(finalizeHookTimeout):
-		// Ensure we still exit even if the shutdown doesn't work properly.
-		// We give 10 extra milliseconds for the cleanup to happen.
-	}
-}
-
 // Run is the top-level entry point to the CLI plugin framework. It should
 // be called from the plugin's "main()" function. It initializes a new
 // [command.DockerCli] instance with the given options before calling
@@ -272,8 +212,8 @@ func newMetadataSubcommand(plugin *cobra.Command, meta metadata.Metadata) *cobra
 		Use:    metadata.MetadataSubcommandName,
 		Hidden: true,
 		// Suppress the global/parent PersistentPreRunE, which
-		// needlessly initializes the client and tries to connect to the
-		// daemon.
+		// needlessly initializes the client and tries to
+		// connect to the daemon.
 		PersistentPreRun: func(cmd *cobra.Command, args []string) {},
 		RunE: func(cmd *cobra.Command, args []string) error {
 			enc := json.NewEncoder(os.Stdout)

cli/cobra.go

@@ -160,25 +160,7 @@ func (tcmd *TopLevelCommand) HandleGlobalFlags() (*cobra.Command, []string, erro
 		return nil, nil, cmd.FlagErrorFunc()(cmd, err)
 	}
 
-	args := flags.Args()
-
-	// A leading "--help"/"-h" is consumed above as the root's persistent
-	// help flag and stripped from args, so the target subcommand never sees
-	// it. That's fine for most subcommands, which inherit the same help
-	// flag instance, but "run" and "create" register their own local
-	// "help" flag (to avoid a shorthand clash with "-h"/"--hostname"),
-	// which shadows the persistent one and is left false. Propagate the
-	// value so "docker --help run <image>" shows help like "docker run
-	// --help" does, instead of running the container.
-	if help, _ := flags.GetBool("help"); help {
-		if sub, _, err := cmd.Find(args); err == nil && sub != cmd {
-			if sub.Flags().Lookup("help") != nil {
-				_ = sub.Flags().Set("help", "true")
-			}
-		}
-	}
-
-	return cmd, args, nil
+	return cmd, flags.Args(), nil
 }
 
 // Initialize finalises global option parsing and initializes the docker client.

cli/cobra_test.go

@@ -108,45 +108,3 @@ func TestDecoratedName(t *testing.T) {
 	topLevelCommand.Annotations = map[string]string{metadata.CommandAnnotationPlugin: "true"}
 	assert.Equal(t, decoratedName(topLevelCommand), "pluginTopLevelCommand*")
 }
-
-// TestHandleGlobalFlagsHelpPropagation covers https://github.com/docker/cli/issues/7473:
-// a leading "--help" is consumed as the root's persistent help flag and
-// stripped from args, so a subcommand that registers its own local "help"
-// flag (as "run" and "create" do, to avoid a shorthand clash with "-h") never
-// sees it and runs instead of showing help.
-func TestHandleGlobalFlagsHelpPropagation(t *testing.T) {
-	newRootCmd := func() (root, sub *cobra.Command) {
-		root = &cobra.Command{Use: "docker"}
-		root.PersistentFlags().BoolP("help", "h", false, "Print usage")
-
-		sub = &cobra.Command{Use: "run", RunE: func(cmd *cobra.Command, args []string) error { return nil }}
-		sub.Flags().Bool("help", false, "Print usage")
-		root.AddCommand(sub)
-		return root, sub
-	}
-
-	t.Run("propagates to the shadowing local help flag", func(t *testing.T) {
-		root, sub := newRootCmd()
-		tcmd := &TopLevelCommand{cmd: root, args: []string{"--help", "run", "hello-world"}}
-
-		_, args, err := tcmd.HandleGlobalFlags()
-		assert.NilError(t, err)
-		assert.DeepEqual(t, args, []string{"run", "hello-world"})
-
-		help, err := sub.Flags().GetBool("help")
-		assert.NilError(t, err)
-		assert.Equal(t, help, true)
-	})
-
-	t.Run("leaves the local help flag alone without --help", func(t *testing.T) {
-		root, sub := newRootCmd()
-		tcmd := &TopLevelCommand{cmd: root, args: []string{"run", "hello-world"}}
-
-		_, _, err := tcmd.HandleGlobalFlags()
-		assert.NilError(t, err)
-
-		help, err := sub.Flags().GetBool("help")
-		assert.NilError(t, err)
-		assert.Equal(t, help, false)
-	})
-}

cli/command/container/cp.go

@@ -335,27 +335,23 @@ func copyFromContainer(ctx context.Context, dockerCLI command.Cli, copyConfig cp
 	}
 
 	restore, done := copyProgress(ctx, dockerCLI.Err(), copyFromContainerHeader, &copiedSize)
-	err = archive.CopyTo(preArchive, srcInfo, dstPath)
+	res := archive.CopyTo(preArchive, srcInfo, dstPath)
 	cancel()
 	<-done
 	restore()
-	if err == nil {
-		reportedSize := copiedSize
-		if !cpRes.Stat.Mode.IsDir() {
-			reportedSize = cpRes.Stat.Size
-		}
-		_, _ = fmt.Fprint(dockerCLI.Err(), copySummary(reportedSize, copiedSize, dstPath))
+	reportedSize := copiedSize
+	if !cpRes.Stat.Mode.IsDir() {
+		reportedSize = cpRes.Stat.Size
 	}
+	_, _ = fmt.Fprint(dockerCLI.Err(), copySummary(reportedSize, copiedSize, dstPath))
 
-	return err
+	return res
 }
 
 // In order to get the copy behavior right, we need to know information
 // about both the source and destination. The API is a simple tar
 // archive/extract API but we can use the stat info header about the
 // destination to be more informed about exactly what the destination is.
-//
-//nolint:gocyclo
 func copyToContainer(ctx context.Context, dockerCLI command.Cli, copyConfig cpConfig) error {
 	srcPath := copyConfig.sourcePath
 	dstPath := copyConfig.destPath
@@ -478,13 +474,11 @@ func copyToContainer(ctx context.Context, dockerCLI command.Cli, copyConfig cpCo
 	cancel()
 	<-done
 	restore()
-	if err == nil {
-		reportedSize := copiedSize
-		if sizeErr == nil {
-			reportedSize = contentSize
-		}
-		_, _ = fmt.Fprint(dockerCLI.Err(), copySummary(reportedSize, copiedSize, copyConfig.container+":"+dstInfo.Path))
+	reportedSize := copiedSize
+	if sizeErr == nil {
+		reportedSize = contentSize
 	}
+	_, _ = fmt.Fprint(dockerCLI.Err(), copySummary(reportedSize, copiedSize, copyConfig.container+":"+dstInfo.Path))
 
 	return err
 }

cli/command/container/cp_test.go

@@ -2,7 +2,6 @@ package container
 
 import (
 	"context"
-	"errors"
 	"io"
 	"os"
 	"runtime"
@@ -447,64 +446,3 @@ func TestCopyToContainerStdinReportsTransferredSize(t *testing.T) {
 	// "(transferred ...)" should not appear.
 	assert.Check(t, !strings.Contains(errOut, "(transferred"))
 }
-
-func TestCopyFromContainerDoesNotReportSuccessOnFailure(t *testing.T) {
-	// Copying a directory onto an existing regular file fails while
-	// extracting ("cannot copy directory"). The failure must not be
-	// preceded by a "Successfully copied" message.
-	srcDir := fs.NewDir(t, "cp-test-fromdir-fail",
-		fs.WithFile("file1", "hello"))
-	destFile := fs.NewFile(t, "cp-test-fromdir-fail-dest", fs.WithContent("original\n"))
-
-	fakeCli := test.NewFakeCli(&fakeClient{
-		containerCopyFromFunc: func(ctr, srcPath string) (client.CopyFromContainerResult, error) {
-			readCloser, err := archive.Tar(srcDir.Path(), compression.None)
-			return client.CopyFromContainerResult{
-				Content: readCloser,
-				Stat: container.PathStat{
-					Name: "mydir",
-					Mode: os.ModeDir | 0o755,
-				},
-			}, err
-		},
-	})
-	err := runCopy(context.TODO(), fakeCli, copyOptions{
-		source:      "container:/mydir",
-		destination: destFile.Path(),
-	})
-	assert.ErrorContains(t, err, "cannot copy directory")
-	assert.Check(t, !strings.Contains(fakeCli.ErrBuffer().String(), "Successfully copied"),
-		"unexpected success message in output: %q", fakeCli.ErrBuffer().String())
-
-	content, err := os.ReadFile(destFile.Path())
-	assert.NilError(t, err)
-	assert.Check(t, is.Equal("original\n", string(content)))
-}
-
-func TestCopyToContainerDoesNotReportSuccessOnFailure(t *testing.T) {
-	// A failed upload must not be followed by a "Successfully copied"
-	// message.
-	srcFile := fs.NewFile(t, "cp-test-to-fail", fs.WithContent("hello"))
-
-	fakeCli := test.NewFakeCli(&fakeClient{
-		containerStatPathFunc: func(containerID, path string) (client.ContainerStatPathResult, error) {
-			return client.ContainerStatPathResult{
-				Stat: container.PathStat{
-					Name: "tmp",
-					Mode: os.ModeDir | 0o755,
-				},
-			}, nil
-		},
-		containerCopyToFunc: func(containerID string, options client.CopyToContainerOptions) (client.CopyToContainerResult, error) {
-			_, _ = io.Copy(io.Discard, options.Content)
-			return client.CopyToContainerResult{}, errors.New("copy to container failed")
-		},
-	})
-	err := runCopy(context.TODO(), fakeCli, copyOptions{
-		source:      srcFile.Path(),
-		destination: "container:/tmp",
-	})
-	assert.ErrorContains(t, err, "copy to container failed")
-	assert.Check(t, !strings.Contains(fakeCli.ErrBuffer().String(), "Successfully copied"),
-		"unexpected success message in output: %q", fakeCli.ErrBuffer().String())
-}

cli/command/formatter/container.go

@@ -146,27 +146,24 @@ func (c *ContainerContext) ID() string {
 // slash (/) prefix stripped. Additional names for the container (related to the
 // legacy `--link` feature) are omitted when formatting "truncated".
 func (c *ContainerContext) Names() string {
-	if c.trunc {
-		// When printing truncated, we only print a single name.
-		//
-		// Pick the first name that's not a legacy link (does not have
-		// slashes inside the name itself (e.g., "/other-container/link")).
-		// Normally this would be the first name found.
-		for _, n := range c.c.Names {
-			if name := strings.TrimPrefix(n, "/"); strings.IndexByte(name, '/') == -1 {
-				return name
-			}
-		}
-		// No name without slashes was found; this can happen when connected
-		// to a classic Swarm API, which prefixes names with the node-name
-		// ("/<node-name>/<container-name>"). Fall back to printing all names.
-	}
 	var b strings.Builder
 	for i, n := range c.c.Names {
+		name := strings.TrimPrefix(n, "/")
+		if c.trunc {
+			// When printing truncated, we only print a single name.
+			//
+			// Pick the first name that's not a legacy link (does not have
+			// slashes inside the name itself (e.g., "/other-container/link")).
+			// Normally this would be the first name found.
+			if strings.IndexByte(name, '/') == -1 {
+				return name
+			}
+			continue
+		}
 		if i > 0 {
 			b.WriteByte(',')
 		}
-		b.WriteString(strings.TrimPrefix(n, "/"))
+		b.WriteString(name)
 	}
 	return b.String()
 }

cli/command/formatter/container_test.go

@@ -48,25 +48,6 @@ func TestContainerPsContext(t *testing.T) {
 			expValue:  "foobar_baz",
 			call:      ctx.Names,
 		},
-		{
-			container: container.Summary{Names: []string{"/other/link", "/foobar_baz"}},
-			trunc:     true,
-			expValue:  "foobar_baz",
-			call:      ctx.Names,
-		},
-		{
-			container: container.Summary{Names: []string{"/foobar_baz", "/other/link"}},
-			expValue:  "foobar_baz,other/link",
-			call:      ctx.Names,
-		},
-		{
-			// Names returned by a classic Swarm API are prefixed with the
-			// node-name; see https://github.com/docker/cli/pull/6875
-			container: container.Summary{Names: []string{"/node-1/foobar_baz"}},
-			trunc:     true,
-			expValue:  "node-1/foobar_baz",
-			call:      ctx.Names,
-		},
 		{
 			container: container.Summary{Image: "ubuntu"},
 			trunc:     true,
@@ -276,7 +257,6 @@ func TestContainerPsContext(t *testing.T) {
 	}
 }
 
-//nolint:dupword // ignore duplicate "ubuntu" in test fixtures
 func TestContainerContextWrite(t *testing.T) {
 	unixTime := time.Now().AddDate(0, 0, -1).Unix()
 	expectedTime := time.Unix(unixTime, 0).String()

cli/command/manifest/annotate.go

@@ -10,10 +10,8 @@ import (
 	"slices"
 
 	"github.com/containerd/errdefs"
-	"github.com/containerd/platforms"
 	"github.com/docker/cli/cli"
 	"github.com/docker/cli/cli/command"
-	"github.com/docker/cli/cli/command/completion"
 	"github.com/docker/cli/cli/config"
 	"github.com/docker/cli/cli/manifest/store"
 	"github.com/docker/cli/internal/registryclient"
@@ -22,23 +20,6 @@ import (
 	"github.com/spf13/cobra"
 )
 
-var (
-	// similar to https://github.com/containerd/platforms/blob/v1.0.0-rc.5/database.go#L29-L38
-	knownOSes = []string{
-		"aix", "android", "darwin", "dragonfly", "freebsd", "hurd", "illumos",
-		"ios", "js", "linux", "nacl", "netbsd", "openbsd", "plan9", "solaris",
-		"windows", "zos",
-	}
-
-	// similar to https://github.com/containerd/platforms/blob/v1.0.0-rc.5/database.go#L51-L60
-	knownArches = []string{
-		"386", "amd64", "amd64p32", "arm", "armbe", "arm64", "arm64be", "ppc64",
-		"ppc64le", "loong64", "mips", "mipsle", "mips64", "mips64le", "mips64p32",
-		"mips64p32le", "ppc", "riscv", "riscv64", "s390", "s390x", "sparc",
-		"sparc64", "wasm",
-	}
-)
-
 type annotateOptions struct {
 	target     string // the target manifest list name (also transaction ID)
 	image      string // the manifest to annotate within the list
@@ -116,8 +97,6 @@ func newAnnotateCommand(dockerCLI command.Cli) *cobra.Command {
 	flags.StringSliceVar(&opts.osFeatures, "os-features", []string{}, "Set operating system feature")
 	flags.StringVar(&opts.variant, "variant", "", "Set architecture variant")
 
-	_ = cmd.RegisterFlagCompletionFunc("os", completion.FromList(knownOSes...))
-	_ = cmd.RegisterFlagCompletionFunc("arch", completion.FromList(knownArches...))
 	return cmd
 }
 
@@ -160,15 +139,8 @@ func runManifestAnnotate(dockerCLI command.Cli, opts annotateOptions) error {
 		imageManifest.Descriptor.Platform.OSVersion = opts.osVersion
 	}
 
-	// Validate platform syntax, without restricting OS/architecture combinations.
-	//
-	// TODO(thaJeztah): Implement a platforms.Validate in containerd/platforms and replace this code.
-	p := imageManifest.Descriptor.Platform
-	if p.OS == "" || p.Architecture == "" {
-		return fmt.Errorf("manifest entry for image has missing os/architecture: %q/%q", p.OS, p.Architecture)
-	}
-	if _, err := platforms.Parse(platforms.FormatAll(*p)); err != nil {
-		return fmt.Errorf("manifest entry for image has invalid platform: %w", err)
+	if !isValidOSArch(imageManifest.Descriptor.Platform.OS, imageManifest.Descriptor.Platform.Architecture) {
+		return fmt.Errorf("manifest entry for image has unsupported os/arch combination: %s/%s", opts.os, opts.arch)
 	}
 	return manifestStore.Save(targetRef, imgRef, imageManifest)
 }

cli/command/manifest/annotate_test.go

@@ -58,16 +58,15 @@ func TestManifestAnnotate(t *testing.T) {
 	assert.ErrorContains(t, cmd.Execute(), expectedError)
 
 	cmd.SetArgs([]string{"example.com/list:v1", "example.com/alpine:3.0"})
-	assert.NilError(t, cmd.Flags().Set("os", "freebsd"))
-	assert.NilError(t, cmd.Flags().Set("arch", "<invalid>"))
-	assert.NilError(t, cmd.Flags().Set("os-version", "1"))
-	assert.NilError(t, cmd.Flags().Set("os-features", "feature1"))
-	assert.NilError(t, cmd.Flags().Set("variant", "v7"))
-
-	expectedError = "manifest entry for image has invalid platform"
+	cmd.Flags().Set("os", "freebsd")
+	cmd.Flags().Set("arch", "fake")
+	cmd.Flags().Set("os-version", "1")
+	cmd.Flags().Set("os-features", "feature1")
+	cmd.Flags().Set("variant", "v7")
+	expectedError = "manifest entry for image has unsupported os/arch combination"
 	assert.ErrorContains(t, cmd.Execute(), expectedError)
 
-	assert.NilError(t, cmd.Flags().Set("arch", "arm"))
+	cmd.Flags().Set("arch", "arm")
 	assert.NilError(t, cmd.Execute())
 
 	cmd = newInspectCommand(cli)

cli/command/manifest/util.go

@@ -9,6 +9,53 @@ import (
 	"github.com/docker/cli/cli/manifest/types"
 )
 
+type osArch struct {
+	os   string
+	arch string
+}
+
+// Remove any unsupported os/arch combo
+// list of valid os/arch values (see "Optional Environment Variables" section
+// of https://go.dev/doc/install/source
+// Added linux/s390x as we know System z support already exists
+// Keep in sync with _docker_manifest_annotate in contrib/completion/bash/docker
+var validOSArches = map[osArch]bool{
+	{os: "darwin", arch: "386"}:      true,
+	{os: "darwin", arch: "amd64"}:    true,
+	{os: "darwin", arch: "arm"}:      true,
+	{os: "darwin", arch: "arm64"}:    true,
+	{os: "dragonfly", arch: "amd64"}: true,
+	{os: "freebsd", arch: "386"}:     true,
+	{os: "freebsd", arch: "amd64"}:   true,
+	{os: "freebsd", arch: "arm"}:     true,
+	{os: "linux", arch: "386"}:       true,
+	{os: "linux", arch: "amd64"}:     true,
+	{os: "linux", arch: "arm"}:       true,
+	{os: "linux", arch: "arm64"}:     true,
+	{os: "linux", arch: "ppc64le"}:   true,
+	{os: "linux", arch: "mips64"}:    true,
+	{os: "linux", arch: "mips64le"}:  true,
+	{os: "linux", arch: "riscv64"}:   true,
+	{os: "linux", arch: "s390x"}:     true,
+	{os: "netbsd", arch: "386"}:      true,
+	{os: "netbsd", arch: "amd64"}:    true,
+	{os: "netbsd", arch: "arm"}:      true,
+	{os: "openbsd", arch: "386"}:     true,
+	{os: "openbsd", arch: "amd64"}:   true,
+	{os: "openbsd", arch: "arm"}:     true,
+	{os: "plan9", arch: "386"}:       true,
+	{os: "plan9", arch: "amd64"}:     true,
+	{os: "solaris", arch: "amd64"}:   true,
+	{os: "windows", arch: "386"}:     true,
+	{os: "windows", arch: "amd64"}:   true,
+}
+
+func isValidOSArch(os string, arch string) bool {
+	// check for existence of this combo
+	_, ok := validOSArches[osArch{os, arch}]
+	return ok
+}
+
 func normalizeReference(ref string) (reference.Named, error) {
 	namedRef, err := reference.ParseNormalizedNamed(ref)
 	if err != nil {

cli/command/registry/login.go

@@ -19,7 +19,6 @@ import (
 	"github.com/docker/cli/internal/tui"
 	registrytypes "github.com/moby/moby/api/types/registry"
 	"github.com/moby/moby/client"
-	"github.com/sirupsen/logrus"
 	"github.com/spf13/cobra"
 	"github.com/spf13/pflag"
 )
@@ -227,7 +226,7 @@ func loginWithStoredCredentials(ctx context.Context, dockerCLI command.Cli, auth
 	return resp.Auth.Status, err
 }
 
-func loginUser(ctx context.Context, dockerCLI command.Cli, opts loginOptions, defaultUsername, serverAddress string) (message string, _ error) {
+func loginUser(ctx context.Context, dockerCLI command.Cli, opts loginOptions, defaultUsername, serverAddress string) (msg string, _ error) {
 	// Some links documenting this:
 	// - https://code.google.com/archive/p/mintty/issues/56
 	// - https://github.com/docker/docker/issues/15272
@@ -241,12 +240,13 @@ func loginUser(ctx context.Context, dockerCLI command.Cli, opts loginOptions, de
 
 	// If we're logging into the index server and the user didn't provide a username or password, use the device flow
 	if serverAddress == registry.IndexServer && opts.user == "" && opts.password == "" {
-		msg, err := loginWithDeviceCodeFlow(ctx, dockerCLI)
-		if err == nil || !errors.Is(err, manager.ErrDeviceLoginStartFail) {
+		var err error
+		msg, err = loginWithDeviceCodeFlow(ctx, dockerCLI)
+		// if the error represents a failure to initiate the device-code flow,
+		// then we fallback to regular cli credentials login
+		if !errors.Is(err, manager.ErrDeviceLoginStartFail) {
 			return msg, err
 		}
-
-		logrus.WithError(err).Debug("failed to start web-based login")
 		_, _ = fmt.Fprint(dockerCLI.Err(), "Failed to start web-based login - falling back to command line login...\n\n")
 	}
 

cli/command/service/opts_test.go

@@ -210,9 +210,9 @@ func TestResourceOptionsToResourceRequirementsSwap(t *testing.T) {
 	r, err = swapOptions.ToResourceRequirements(flags)
 	assert.NilError(t, err)
 	assert.Check(t, r.SwapBytes != nil)
-	assert.Check(t, is.Equal(*r.SwapBytes, int64(86000)))
+	assert.Check(t, is.Equal(*(r.SwapBytes), int64(86000)))
 	assert.Check(t, r.MemorySwappiness != nil)
-	assert.Check(t, is.Equal(*r.MemorySwappiness, int64(23)))
+	assert.Check(t, is.Equal(*(r.MemorySwappiness), int64(23)))
 }
 
 func TestToServiceNetwork(t *testing.T) {

cli/command/telemetry.go

@@ -20,7 +20,7 @@ import (
 	"go.opentelemetry.io/otel/trace"
 )
 
-const ExportTimeout = 50 * time.Millisecond
+const exportTimeout = 50 * time.Millisecond
 
 // TracerProvider is an extension of the trace.TracerProvider interface for CLI programs.
 type TracerProvider interface {
@@ -205,7 +205,7 @@ func (r *cliReader) Shutdown(ctx context.Context) error {
 	// We don't want CLI metrics to prevent the CLI from exiting
 	// so if there's some kind of issue we need to abort pretty
 	// quickly.
-	ctx, cancel := context.WithTimeout(ctx, ExportTimeout)
+	ctx, cancel := context.WithTimeout(ctx, exportTimeout)
 	defer cancel()
 
 	return r.ForceFlush(ctx)

cli/command/telemetry_docker.go

@@ -99,10 +99,6 @@ func dockerSpanExporter(ctx context.Context, cli Cli) []sdktrace.TracerProviderO
 
 	opts := []otlptracegrpc.Option{
 		otlptracegrpc.WithEndpoint(endpoint),
-		// The whole export is bounded by ExportTimeout, which is too short for a retry
-		// backoff to complete. With retries on, a refused connection (for example a stale
-		// Docker Desktop socket) waits out the full timeout instead of failing right away.
-		otlptracegrpc.WithRetry(otlptracegrpc.RetryConfig{Enabled: false}),
 	}
 	if !secure {
 		opts = append(opts, otlptracegrpc.WithInsecure())
@@ -113,7 +109,7 @@ func dockerSpanExporter(ctx context.Context, cli Cli) []sdktrace.TracerProviderO
 		otel.Handle(err)
 		return nil
 	}
-	return []sdktrace.TracerProviderOption{sdktrace.WithBatcher(exp, sdktrace.WithExportTimeout(ExportTimeout))}
+	return []sdktrace.TracerProviderOption{sdktrace.WithBatcher(exp, sdktrace.WithExportTimeout(exportTimeout))}
 }
 
 func dockerMetricExporter(ctx context.Context, cli Cli) []sdkmetric.Option {
@@ -124,7 +120,6 @@ func dockerMetricExporter(ctx context.Context, cli Cli) []sdkmetric.Option {
 
 	opts := []otlpmetricgrpc.Option{
 		otlpmetricgrpc.WithEndpoint(endpoint),
-		otlpmetricgrpc.WithRetry(otlpmetricgrpc.RetryConfig{Enabled: false}),
 	}
 	if !secure {
 		opts = append(opts, otlpmetricgrpc.WithInsecure())

cli/command/telemetry_utils.go

@@ -85,7 +85,7 @@ func startCobraCommandTimer(mp metric.MeterProvider, attrs []attribute.KeyValue)
 	return func(err error) {
 		// Use a new context for the export so that the command being cancelled
 		// doesn't affect the metrics, and we get metrics for cancelled commands.
-		ctx, cancel := context.WithTimeout(context.Background(), ExportTimeout)
+		ctx, cancel := context.WithTimeout(context.Background(), exportTimeout)
 		defer cancel()
 
 		duration := float64(time.Since(start)) / float64(time.Millisecond)

cli/compose/loader/merge.go

@@ -255,6 +255,7 @@ func mergeLoggingConfig(dst, src reflect.Value) error {
 	return nil
 }
 
+//nolint:unparam
 func mergeUlimitsConfig(dst, src reflect.Value) error {
 	if src.Interface() != reflect.Zero(reflect.TypeOf(src.Interface())).Interface() {
 		dst.Elem().Set(src.Elem())
@@ -262,6 +263,7 @@ func mergeUlimitsConfig(dst, src reflect.Value) error {
 	return nil
 }
 
+//nolint:unparam
 func mergeShellCommand(dst, src reflect.Value) error {
 	if src.Len() != 0 {
 		dst.Set(src)
@@ -269,6 +271,7 @@ func mergeShellCommand(dst, src reflect.Value) error {
 	return nil
 }
 
+//nolint:unparam
 func mergeServiceNetworkConfig(dst, src reflect.Value) error {
 	if src.Interface() != reflect.Zero(reflect.TypeOf(src.Interface())).Interface() {
 		dst.Elem().FieldByName("Aliases").Set(src.Elem().FieldByName("Aliases"))
@@ -282,6 +285,7 @@ func mergeServiceNetworkConfig(dst, src reflect.Value) error {
 	return nil
 }
 
+//nolint:unparam
 func mergeUint64(dst, src reflect.Value) error {
 	if !src.IsNil() {
 		dst.Elem().Set(src.Elem())

cmd/docker-trust/internal/test/cmd.go

@@ -27,13 +27,8 @@ func TerminatePrompt(ctx context.Context, t *testing.T, cmd *cobra.Command, cli
 	}))
 	cli.SetOut(outStream)
 
-	r, w, err := os.Pipe()
+	r, _, err := os.Pipe()
 	assert.NilError(t, err)
-	t.Cleanup(func() {
-		_ = w.Close()
-		_ = r.Close()
-	})
-
 	cli.SetIn(streams.NewIn(r))
 
 	notifyCtx, notifyCancel := context.WithCancel(ctx)
@@ -63,6 +58,8 @@ func TerminatePrompt(ctx context.Context, t *testing.T, cmd *cobra.Command, cli
 		}()
 	}
 
+	assert.Check(t, cli.OutBuffer().Len() > 0)
+
 	// a small delay to ensure the plugin is prompting
 	time.Sleep(100 * time.Microsecond)
 

cmd/docker-trust/internal/trust/trust_push.go

@@ -11,9 +11,8 @@ import (
 
 	"github.com/distribution/reference"
 	"github.com/docker/cli/cli/streams"
-	"github.com/moby/moby/api/types/jsonstream"
+	"github.com/docker/cli/internal/jsonstream"
 	registrytypes "github.com/moby/moby/api/types/registry"
-	"github.com/moby/moby/client/pkg/jsonmessage"
 	"github.com/opencontainers/go-digest"
 	"github.com/theupdateframework/notary/client"
 	"github.com/theupdateframework/notary/tuf/data"
@@ -47,7 +46,7 @@ func PushTrustedReference(ctx context.Context, ioStreams Streams, repoInfo *Repo
 	// Count the times of calling for handleTarget,
 	// if it is called more that once, that should be considered an error in a trusted push.
 	cnt := 0
-	handleTarget := func(msg jsonstream.Message) {
+	handleTarget := func(msg jsonstream.JSONMessage) {
 		cnt++
 		if cnt > 1 {
 			// handleTarget should only be called once. This will be treated as an error.
@@ -79,14 +78,14 @@ func PushTrustedReference(ctx context.Context, ioStreams Streams, repoInfo *Repo
 	default:
 		// We want trust signatures to always take an explicit tag,
 		// otherwise it will act as an untrusted push.
-		if err := displayJSONMessages(ctx, in, ioStreams.Out(), nil); err != nil {
+		if err := jsonstream.Display(ctx, in, ioStreams.Out()); err != nil {
 			return err
 		}
 		_, _ = fmt.Fprintln(ioStreams.Err(), "No tag specified, skipping trust metadata push")
 		return nil
 	}
 
-	if err := displayJSONMessages(ctx, in, ioStreams.Out(), handleTarget); err != nil {
+	if err := jsonstream.Display(ctx, in, ioStreams.Out(), jsonstream.WithAuxCallback(handleTarget)); err != nil {
 		return err
 	}
 
@@ -148,34 +147,3 @@ func PushTrustedReference(ctx context.Context, ioStreams Streams, repoInfo *Repo
 	_, _ = fmt.Fprintf(ioStreams.Out(), "Successfully signed %s:%s\n", repoInfo.Name.Name(), tag)
 	return nil
 }
-
-type ctxReader struct {
-	err chan error
-	r   io.Reader
-}
-
-func (r *ctxReader) Read(p []byte) (int, error) {
-	select {
-	case err := <-r.err:
-		return 0, err
-	default:
-		return r.r.Read(p)
-	}
-}
-
-// displayJSONMessages prints the JSON messages from in to out. It returns
-// ctx.Err() if ctx is canceled, but not when in is closed.
-func displayJSONMessages(ctx context.Context, in io.Reader, out *streams.Out, auxCallback func(jsonstream.Message)) error {
-	if ctx.Err() != nil {
-		return ctx.Err()
-	}
-
-	reader := &ctxReader{err: make(chan error, 1), r: in}
-	stop := context.AfterFunc(ctx, func() { reader.err <- ctx.Err() })
-	defer stop()
-
-	if err := jsonmessage.DisplayJSONMessagesStream(reader, out, out.FD(), out.IsTerminal(), auxCallback); err != nil {
-		return err
-	}
-	return ctx.Err()
-}

cmd/docker-trust/trust/cmd.go

@@ -0,0 +1,32 @@
+package trust
+
+import (
+	"github.com/docker/cli/cli"
+	"github.com/docker/cli/cli/command"
+	"github.com/docker/cli/internal/commands"
+	"github.com/spf13/cobra"
+)
+
+func init() {
+	commands.Register(newTrustCommand)
+}
+
+// newTrustCommand returns a cobra command for `trust` subcommands.
+func newTrustCommand(dockerCLI command.Cli) *cobra.Command {
+	cmd := &cobra.Command{
+		Use:   "trust",
+		Short: "Manage trust on Docker images",
+		Args:  cli.NoArgs,
+		RunE:  command.ShowHelp(dockerCLI.Err()),
+
+		DisableFlagsInUseLine: true,
+	}
+	cmd.AddCommand(
+		newRevokeCommand(dockerCLI),
+		newSignCommand(dockerCLI),
+		newTrustKeyCommand(dockerCLI),
+		newTrustSignerCommand(dockerCLI),
+		newInspectCommand(dockerCLI),
+	)
+	return cmd
+}

cmd/docker-trust/trust/key_generate.go

@@ -5,12 +5,12 @@ import (
 	"fmt"
 	"os"
 	"path/filepath"
-	"regexp"
 	"strings"
 
 	"github.com/docker/cli/cli"
 	"github.com/docker/cli/cli/command"
 	"github.com/docker/cli/cmd/docker-trust/internal/trust"
+	"github.com/docker/cli/internal/lazyregexp"
 	"github.com/spf13/cobra"
 	"github.com/theupdateframework/notary"
 	"github.com/theupdateframework/notary/trustmanager"
@@ -41,7 +41,7 @@ func newKeyGenerateCommand(dockerCLI command.Streams) *cobra.Command {
 }
 
 // key names can use lowercase alphanumeric + _ + - characters
-var validKeyName = regexp.MustCompile(`^[a-z0-9][a-z0-9\_\-]*$`).MatchString
+var validKeyName = lazyregexp.New(`^[a-z0-9][a-z0-9\_\-]*$`).MatchString
 
 // validate that all of the key names are unique and are alphanumeric + _ + -
 // and that we do not already have public key files in the target dir on disk

cmd/docker-trust/trust/signer_add.go

@@ -7,12 +7,12 @@ import (
 	"io"
 	"os"
 	"path"
-	"regexp"
 	"strings"
 
 	"github.com/docker/cli/cli"
 	"github.com/docker/cli/cli/command"
 	"github.com/docker/cli/cmd/docker-trust/internal/trust"
+	"github.com/docker/cli/internal/lazyregexp"
 	"github.com/docker/cli/opts"
 	"github.com/spf13/cobra"
 	"github.com/theupdateframework/notary/client"
@@ -45,7 +45,7 @@ func newSignerAddCommand(dockerCLI command.Cli) *cobra.Command {
 	return cmd
 }
 
-var validSignerName = regexp.MustCompile(`^[a-z0-9][a-z0-9\_\-]*$`).MatchString
+var validSignerName = lazyregexp.New(`^[a-z0-9][a-z0-9\_\-]*$`).MatchString
 
 func addSigner(ctx context.Context, dockerCLI command.Cli, options signerAddOptions) error {
 	signerName := options.signer

cmd/docker/docker.go

@@ -580,15 +580,6 @@ func runDocker(ctx context.Context, dockerCli *command.DockerCli) error {
 			}
 			// Other missing or invalid plugins fall through to cmd.ExecuteContext(),
 			// which reports the standard unknown-command error.
-			//
-			// Cobra handles "--version" before it checks for unknown commands,
-			// so unset it to make "docker nonexistent --version" fail instead
-			// of printing the version. A global "--version" flag (as in
-			// "docker --version nonexistent") was already parsed, and still
-			// prints the version.
-			if !cmd.Flags().Changed("version") {
-				cmd.Version = ""
-			}
 		}
 	}
 

contrib/completion/bash/docker

@@ -4156,7 +4156,6 @@ _docker_manifest_annotate() {
 				amd64
 				arm
 				arm64
-				loong64
 				mips64
 				mips64le
 				ppc64le

dockerfiles/Dockerfile.authors

@@ -2,7 +2,7 @@
 
 # ALPINE_VERSION sets the version of the alpine base image to use.
 # It must be a supported tag in the docker.io/library/alpine image repository.
-ARG ALPINE_VERSION=3.24
+ARG ALPINE_VERSION=3.23
 
 FROM alpine:${ALPINE_VERSION} AS gen
 RUN apk add --no-cache bash git

dockerfiles/Dockerfile.dev

@@ -1,16 +1,16 @@
 # syntax=docker/dockerfile:1
 
-ARG GO_VERSION=1.27.4
+ARG GO_VERSION=1.26.10
 
 # ALPINE_VERSION sets the version of the alpine base image to use, including for the golang image.
 # It must be a supported tag in the docker.io/library/alpine image repository
 # that's also available as alpine image variant for the Golang version used.
-ARG ALPINE_VERSION=3.24
+ARG ALPINE_VERSION=3.23
 
 # BUILDX_VERSION sets the version of buildx to install in the dev container.
 # It must be a valid tag in the docker.io/docker/buildx-bin image repository
 # on Docker Hub.
-ARG BUILDX_VERSION=0.38.2
+ARG BUILDX_VERSION=0.38.0
 FROM docker/buildx-bin:${BUILDX_VERSION} AS buildx
 
 FROM golang:${GO_VERSION}-alpine${ALPINE_VERSION} AS golang

dockerfiles/Dockerfile.lint

@@ -1,13 +1,13 @@
 # syntax=docker/dockerfile:1
 
-ARG GO_VERSION=1.27.4
+ARG GO_VERSION=1.26.10
 
 # ALPINE_VERSION sets the version of the alpine base image to use, including for the golang image.
 # It must be a supported tag in the docker.io/library/alpine image repository
 # that's also available as alpine image variant for the Golang version used.
-ARG ALPINE_VERSION=3.24
+ARG ALPINE_VERSION=3.23
 # GOLANGCI_LINT_VERSION sets the version of the golangci/golangci-lint image to use.
-ARG GOLANGCI_LINT_VERSION=v2.14.0
+ARG GOLANGCI_LINT_VERSION=v2.10.1
 
 FROM golangci/golangci-lint:${GOLANGCI_LINT_VERSION}-alpine AS golangci-lint
 

dockerfiles/Dockerfile.vendor

@@ -1,12 +1,12 @@
 # syntax=docker/dockerfile:1
 
-ARG GO_VERSION=1.27.4
+ARG GO_VERSION=1.26.10
 
 # ALPINE_VERSION sets the version of the alpine base image to use, including for the golang image.
 # It must be a supported tag in the docker.io/library/alpine image repository
 # that's also available as alpine image variant for the Golang version used.
-ARG ALPINE_VERSION=3.24
-ARG MODOUTDATED_VERSION=v0.9.0
+ARG ALPINE_VERSION=3.23
+ARG MODOUTDATED_VERSION=v0.8.0
 
 FROM golang:${GO_VERSION}-alpine${ALPINE_VERSION} AS base
 ENV GOTOOLCHAIN=local

docs/extend/EBS_volume.md

@@ -1,7 +1,165 @@
 ---
-title: Volume plugin for Amazon EBS
 description: Volume plugin for Amazon EBS
 keywords: "API, Usage, plugins, documentation, developer, amazon, ebs, rexray, volume"
 ---
 
-This content has moved to the [github.com/moby/moby](https://github.com/moby/moby/blob/v2.0.0-beta.29/docs/extend/) repository.
+<!-- This file is maintained within the docker/cli GitHub
+     repository at https://github.com/docker/cli/. Make all
+     pull requests against that repo. If you see this file in
+     another repository, consider it read-only there, as it will
+     periodically be overwritten by the definitive file. Pull
+     requests which include edits to this file in other repositories
+     will be rejected.
+-->
+
+# Volume plugin for Amazon EBS
+
+## A proof-of-concept Rexray plugin
+
+In this example, a simple Rexray plugin will be created for the purposes of using
+it on an Amazon EC2 instance with EBS. It is not meant to be a complete Rexray plugin.
+
+The example source is available at [https://github.com/tiborvass/rexray-plugin](https://github.com/tiborvass/rexray-plugin).
+
+To learn more about Rexray: [https://github.com/codedellemc/rexray](https://github.com/codedellemc/rexray)
+
+## 1. Make a Docker image
+
+The following is the Dockerfile used to containerize rexray.
+
+```dockerfile
+FROM debian:jessie
+RUN apt-get update && apt-get install -y --no-install-recommends wget ca-certificates
+RUN wget https://dl.bintray.com/emccode/rexray/stable/0.6.4/rexray-Linux-x86_64-0.6.4.tar.gz -O rexray.tar.gz && tar -xvzf rexray.tar.gz -C /usr/bin && rm rexray.tar.gz
+RUN mkdir -p /run/docker/plugins /var/lib/libstorage/volumes
+ENTRYPOINT ["rexray"]
+CMD ["--help"]
+```
+
+To build it you can run `image=$(cat Dockerfile | docker build -q -)` and `$image`
+will reference the containerized rexray image.
+
+## 2. Extract rootfs
+
+```sh
+$ TMPDIR=/tmp/rexray  # for the purpose of this example
+$  # create container without running it, to extract the rootfs from image
+$ docker create --name rexray "$image"
+$  # save the rootfs to a tar archive
+$ docker export -o $TMPDIR/rexray.tar rexray
+$  # extract rootfs from tar archive to a rootfs folder
+$ ( mkdir -p $TMPDIR/rootfs; cd $TMPDIR/rootfs; tar xf ../rexray.tar )
+```
+
+## 3. Add plugin configuration
+
+We have to put the following JSON to `$TMPDIR/config.json`:
+
+```json
+{
+      "Args": {
+        "Description": "",
+        "Name": "",
+        "Settable": null,
+        "Value": null
+      },
+      "Description": "A proof-of-concept EBS plugin (using rexray) for Docker",
+      "Documentation": "https://github.com/tiborvass/rexray-plugin",
+      "Entrypoint": [
+        "/usr/bin/rexray", "service", "start", "-f"
+      ],
+      "Env": [
+        {
+          "Description": "",
+          "Name": "REXRAY_SERVICE",
+          "Settable": [
+            "value"
+          ],
+          "Value": "ebs"
+        },
+        {
+          "Description": "",
+          "Name": "EBS_ACCESSKEY",
+          "Settable": [
+            "value"
+          ],
+          "Value": ""
+        },
+        {
+          "Description": "",
+          "Name": "EBS_SECRETKEY",
+          "Settable": [
+            "value"
+          ],
+          "Value": ""
+        }
+      ],
+      "Interface": {
+        "Socket": "rexray.sock",
+        "Types": [
+          "docker.volumedriver/1.0"
+        ]
+      },
+      "Linux": {
+        "AllowAllDevices": true,
+        "Capabilities": ["CAP_SYS_ADMIN"],
+        "Devices": null
+      },
+      "Mounts": [
+        {
+          "Source": "/dev",
+          "Destination": "/dev",
+          "Type": "bind",
+          "Options": ["rbind"]
+        }
+      ],
+      "Network": {
+        "Type": "host"
+      },
+      "PropagatedMount": "/var/lib/libstorage/volumes",
+      "User": {},
+      "WorkDir": ""
+}
+```
+
+Note a couple of points:
+- `PropagatedMount` is needed so that the docker daemon can see mounts done by the
+rexray plugin from within the container, otherwise the docker daemon is not able
+to mount a docker volume.
+- The rexray plugin needs dynamic access to host devices. For that reason, we
+have to give it access to all devices under `/dev` and set `AllowAllDevices` to
+true for proper access.
+- The user of this simple plugin can change only 3 settings: `REXRAY_SERVICE`,
+`EBS_ACCESSKEY` and `EBS_SECRETKEY`. This is because of the reduced scope of this
+plugin. Ideally other rexray parameters could also be set.
+
+## 4. Create plugin
+
+`docker plugin create tiborvass/rexray-plugin "$TMPDIR"` will create the plugin.
+
+```sh
+$ docker plugin ls
+ID                  NAME                             DESCRIPTION                         ENABLED
+2475a4bd0ca5        tiborvass/rexray-plugin:latest   A rexray volume plugin for Docker   false
+```
+
+## 5. Test plugin
+
+```sh
+$ docker plugin set tiborvass/rexray-plugin EBS_ACCESSKEY=$AWS_ACCESSKEY EBS_SECRETKEY=$AWS_SECRETKEY`
+$ docker plugin enable tiborvass/rexray-plugin
+$ docker volume create -d tiborvass/rexray-plugin my-ebs-volume
+$ docker volume ls
+DRIVER                              VOLUME NAME
+tiborvass/rexray-plugin:latest      my-ebs-volume
+$ docker run --rm -v my-ebs-volume:/volume busybox sh -c 'echo bye > /volume/hi'
+$ docker run --rm -v my-ebs-volume:/volume busybox cat /volume/hi
+bye
+```
+
+## 6. Push plugin
+
+First, ensure you are logged in with `docker login`. Then you can run:
+`docker plugin push tiborvass/rexray-plugin` to push it like a regular docker
+image to a registry, to make it available for others to install via
+`docker plugin install tiborvass/rexray-plugin EBS_ACCESSKEY=$AWS_ACCESSKEY EBS_SECRETKEY=$AWS_SECRETKEY`.

docs/extend/README.md

@@ -1,3 +0,0 @@
-# Docker Engine managed plugin system
-
-This content has moved to the [github.com/moby/moby](https://github.com/moby/moby/blob/v2.0.0-beta.29/docs/extend/) repository.

docs/extend/_index.md

@@ -7,4 +7,265 @@ aliases:
   - "/engine/extend/plugins_graphdriver/"
 ---
 
-This content has moved to the [github.com/moby/moby](https://github.com/moby/moby/blob/v2.0.0-beta.29/docs/extend/) repository.
+- [Installing and using a plugin](index.md#installing-and-using-a-plugin)
+- [Developing a plugin](index.md#developing-a-plugin)
+- [Debugging plugins](index.md#debugging-plugins)
+
+Docker Engine's plugin system lets you install, start, stop, and remove
+plugins using Docker Engine.
+
+For information about legacy (non-managed) plugins, refer to
+[Understand legacy Docker Engine plugins](legacy_plugins.md).
+
+> [!NOTE]
+> Docker Engine managed plugins are currently not supported on Windows daemons.
+
+## Installing and using a plugin
+
+Plugins are distributed as Docker images and can be hosted on Docker Hub or on
+a private registry.
+
+To install a plugin, use the `docker plugin install` command, which pulls the
+plugin from Docker Hub or your private registry, prompts you to grant
+permissions or capabilities if necessary, and enables the plugin.
+
+To check the status of installed plugins, use the `docker plugin ls` command.
+Plugins that start successfully are listed as enabled in the output.
+
+After a plugin is installed, you can use it as an option for another Docker
+operation, such as creating a volume.
+
+In the following example, you install the [`rclone` plugin](https://rclone.org/docker/), verify that it is
+enabled, and use it to create a volume.
+
+> [!NOTE]
+> This example is intended for instructional purposes only.
+
+1. Set up the pre-requisite directories. By default they must exist on the host at the following locations:
+
+   - `/var/lib/docker-plugins/rclone/config`. Reserved for the `rclone.conf` config file and must exist even if it's empty and the config file is not present.
+   - `/var/lib/docker-plugins/rclone/cache`. Holds the plugin state file as well as optional VFS caches.
+
+2. Install the `rclone` plugin.
+
+   ```console
+   $ docker plugin install rclone/docker-volume-rclone --alias rclone
+
+   Plugin "rclone/docker-volume-rclone" is requesting the following privileges:
+    - network: [host]
+    - mount: [/var/lib/docker-plugins/rclone/config]
+    - mount: [/var/lib/docker-plugins/rclone/cache]
+    - device: [/dev/fuse]
+    - capabilities: [CAP_SYS_ADMIN]
+   Do you grant the above permissions? [y/N] 
+   ```
+
+   The plugin requests 5 privileges:
+
+   - It needs access to the `host` network.
+   - Access to pre-requisite directories to mount to store:
+      - Your Rclone config files
+      - Temporary cache data
+   - Gives access to the FUSE (Filesystem in Userspace) device. This is required because Rclone uses FUSE to mount remote storage as if it were a local filesystem.
+   - It needs the `CAP_SYS_ADMIN` capability, which allows the plugin to run
+     the `mount` command.
+
+2. Check that the plugin is enabled in the output of `docker plugin ls`.
+
+   ```console
+   $ docker plugin ls
+
+   ID                    NAME                      DESCRIPTION                                ENABLED
+   aede66158353          rclone:latest             Rclone volume plugin for Docker            true
+   ```
+
+3. Create a volume using the plugin.
+   This example mounts the `/remote` directory on host `1.2.3.4` into a
+   volume named `rclonevolume`.
+
+   This volume can now be mounted into containers.
+
+   ```console
+   $ docker volume create \
+     -d rclone \
+     --name rclonevolume \
+     -o type=sftp \
+     -o path=remote \
+     -o sftp-host=1.2.3.4 \
+     -o sftp-user=user \
+     -o "sftp-password=$(cat file_containing_password_for_remote_host)"
+   ```
+
+4. Verify that the volume was created successfully.
+
+   ```console
+   $ docker volume ls
+
+   DRIVER              NAME
+   rclone         rclonevolume
+   ```
+
+5. Start a container that uses the volume `rclonevolume`.
+
+   ```console
+   $ docker run --rm -v rclonevolume:/data busybox ls /data
+
+   <content of /remote on machine 1.2.3.4>
+   ```
+
+6. Remove the volume `rclonevolume`
+
+   ```console
+   $ docker volume rm rclonevolume
+
+   sshvolume
+   ```
+
+To disable a plugin, use the `docker plugin disable` command. To completely
+remove it, use the `docker plugin remove` command. For other available
+commands and options, see the
+[command line reference](https://docs.docker.com/reference/cli/docker/).
+
+## Developing a plugin
+
+#### The rootfs directory
+
+The `rootfs` directory represents the root filesystem of the plugin. In this
+example, it was created from a Dockerfile:
+
+> [!NOTE]
+> The `/run/docker/plugins` directory is mandatory inside of the
+> plugin's filesystem for Docker to communicate with the plugin.
+
+```console
+$ git clone https://github.com/vieux/docker-volume-sshfs
+$ cd docker-volume-sshfs
+$ docker build -t rootfsimage .
+$ id=$(docker create rootfsimage true) # id was cd851ce43a403 when the image was created
+$ sudo mkdir -p myplugin/rootfs
+$ sudo docker export "$id" | sudo tar -x -C myplugin/rootfs
+$ docker rm -vf "$id"
+$ docker rmi rootfsimage
+```
+
+#### The config.json file
+
+The `config.json` file describes the plugin. See the [plugins config reference](config.md).
+
+Consider the following `config.json` file.
+
+```json
+{
+  "description": "sshFS plugin for Docker",
+  "documentation": "https://docs.docker.com/engine/extend/plugins/",
+  "entrypoint": ["/docker-volume-sshfs"],
+  "network": {
+    "type": "host"
+  },
+  "interface": {
+    "types": ["docker.volumedriver/1.0"],
+    "socket": "sshfs.sock"
+  },
+  "linux": {
+    "capabilities": ["CAP_SYS_ADMIN"]
+  }
+}
+```
+
+This plugin is a volume driver. It requires a `host` network and the
+`CAP_SYS_ADMIN` capability. It depends upon the `/docker-volume-sshfs`
+entrypoint and uses the `/run/docker/plugins/sshfs.sock` socket to communicate
+with Docker Engine. This plugin has no runtime parameters.
+
+#### Creating the plugin
+
+A new plugin can be created by running
+`docker plugin create <plugin-name> ./path/to/plugin/data` where the plugin
+data contains a plugin configuration file `config.json` and a root filesystem
+in subdirectory `rootfs`.
+
+After that the plugin `<plugin-name>` will show up in `docker plugin ls`.
+Plugins can be pushed to remote registries with
+`docker plugin push <plugin-name>`.
+
+## Debugging plugins
+
+Stdout of a plugin is redirected to dockerd logs. Such entries have a
+`plugin=<ID>` suffix. Here are a few examples of commands for pluginID
+`f52a3df433b9aceee436eaada0752f5797aab1de47e5485f1690a073b860ff62` and their
+corresponding log entries in the docker daemon logs.
+
+```console
+$ docker plugin install tiborvass/sample-volume-plugin
+
+INFO[0036] Starting...       Found 0 volumes on startup  plugin=f52a3df433b9aceee436eaada0752f5797aab1de47e5485f1690a073b860ff62
+```
+
+```console
+$ docker volume create -d tiborvass/sample-volume-plugin samplevol
+
+INFO[0193] Create Called...  Ensuring directory /data/samplevol exists on host...  plugin=f52a3df433b9aceee436eaada0752f5797aab1de47e5485f1690a073b860ff62
+INFO[0193] open /var/lib/docker/plugin-data/local-persist.json: no such file or directory  plugin=f52a3df433b9aceee436eaada0752f5797aab1de47e5485f1690a073b860ff62
+INFO[0193]                   Created volume samplevol with mountpoint /data/samplevol  plugin=f52a3df433b9aceee436eaada0752f5797aab1de47e5485f1690a073b860ff62
+INFO[0193] Path Called...    Returned path /data/samplevol  plugin=f52a3df433b9aceee436eaada0752f5797aab1de47e5485f1690a073b860ff62
+```
+
+```console
+$ docker run -v samplevol:/tmp busybox sh
+
+INFO[0421] Get Called...     Found samplevol                plugin=f52a3df433b9aceee436eaada0752f5797aab1de47e5485f1690a073b860ff62
+INFO[0421] Mount Called...   Mounted samplevol              plugin=f52a3df433b9aceee436eaada0752f5797aab1de47e5485f1690a073b860ff62
+INFO[0421] Path Called...    Returned path /data/samplevol  plugin=f52a3df433b9aceee436eaada0752f5797aab1de47e5485f1690a073b860ff62
+INFO[0421] Unmount Called... Unmounted samplevol            plugin=f52a3df433b9aceee436eaada0752f5797aab1de47e5485f1690a073b860ff62
+```
+
+#### Using runc to obtain logfiles and shell into the plugin.
+
+Use `runc`, the default docker container runtime, for debugging plugins by
+collecting plugin logs redirected to a file.
+
+```console
+$ sudo runc --root /run/docker/runtime-runc/plugins.moby list
+
+ID                                                                 PID         STATUS      BUNDLE                                                                                                                                       CREATED                          OWNER
+93f1e7dbfe11c938782c2993628c895cf28e2274072c4a346a6002446c949b25   15806       running     /run/docker/containerd/daemon/io.containerd.runtime.v1.linux/moby-plugins/93f1e7dbfe11c938782c2993628c895cf28e2274072c4a346a6002446c949b25   2018-02-08T21:40:08.621358213Z   root
+9b4606d84e06b56df84fadf054a21374b247941c94ce405b0a261499d689d9c9   14992       running     /run/docker/containerd/daemon/io.containerd.runtime.v1.linux/moby-plugins/9b4606d84e06b56df84fadf054a21374b247941c94ce405b0a261499d689d9c9   2018-02-08T21:35:12.321325872Z   root
+c5bb4b90941efcaccca999439ed06d6a6affdde7081bb34dc84126b57b3e793d   14984       running     /run/docker/containerd/daemon/io.containerd.runtime.v1.linux/moby-plugins/c5bb4b90941efcaccca999439ed06d6a6affdde7081bb34dc84126b57b3e793d   2018-02-08T21:35:12.321288966Z   root
+```
+
+```console
+$ sudo runc --root /run/docker/runtime-runc/plugins.moby exec 93f1e7dbfe11c938782c2993628c895cf28e2274072c4a346a6002446c949b25 cat /var/log/plugin.log
+```
+
+If the plugin has a built-in shell, then exec into the plugin can be done as
+follows:
+
+```console
+$ sudo runc --root /run/docker/runtime-runc/plugins.moby exec -t 93f1e7dbfe11c938782c2993628c895cf28e2274072c4a346a6002446c949b25 sh
+```
+
+#### Using curl to debug plugin socket issues.
+
+To verify if the plugin API socket that the docker daemon communicates with
+is responsive, use curl. In this example, we will make API calls from the
+docker host to volume and network plugins using curl 7.47.0 to ensure that
+the plugin is listening on the said socket. For a well functioning plugin,
+these basic requests should work. Note that plugin sockets are available on the host under `/var/run/docker/plugins/<pluginID>`
+
+```console
+$ curl -H "Content-Type: application/json" -XPOST -d '{}' --unix-socket /var/run/docker/plugins/e8a37ba56fc879c991f7d7921901723c64df6b42b87e6a0b055771ecf8477a6d/plugin.sock http:/VolumeDriver.List
+
+{"Mountpoint":"","Err":"","Volumes":[{"Name":"myvol1","Mountpoint":"/data/myvol1"},{"Name":"myvol2","Mountpoint":"/data/myvol2"}],"Volume":null}
+```
+
+```console
+$ curl -H "Content-Type: application/json" -XPOST -d '{}' --unix-socket /var/run/docker/plugins/45e00a7ce6185d6e365904c8bcf62eb724b1fe307e0d4e7ecc9f6c1eb7bcdb70/plugin.sock http:/NetworkDriver.GetCapabilities
+
+{"Scope":"local"}
+```
+
+When using curl 7.5 and above, the URL should be of the form
+`http://hostname/APICall`, where `hostname` is the valid hostname where the
+plugin is installed and `APICall` is the call to the plugin API.
+
+For example, `http://localhost/VolumeDriver.List`

docs/extend/config.md

@@ -4,4 +4,224 @@ keywords: "API, Usage, plugins, documentation, developer"
 title: Plugin Config Version 1 of Plugin V2
 ---
 
-This content has moved to the [github.com/moby/moby](https://github.com/moby/moby/blob/v2.0.0-beta.29/docs/extend/) repository.
+This document outlines the format of the V0 plugin configuration.
+
+Plugin configs describe the various constituents of a Docker engine plugin.
+Plugin configs can be serialized to JSON format with the following media types:
+
+| Config Type | Media Type                              |
+|-------------|-----------------------------------------|
+| config      | `application/vnd.docker.plugin.v1+json` |
+
+## Config Field Descriptions
+
+Config provides the base accessible fields for working with V0 plugin format in
+the registry.
+
+- `description` string
+
+  Description of the plugin
+
+- `documentation` string
+
+  Link to the documentation about the plugin
+
+- `interface` PluginInterface
+
+  Interface implemented by the plugins, struct consisting of the following fields:
+
+  - `types` string array
+
+    Types indicate what interface(s) the plugin currently implements.
+
+    Supported types:
+
+    - `docker.volumedriver/1.0`
+
+    - `docker.networkdriver/1.0`
+
+    - `docker.ipamdriver/1.0`
+
+    - `docker.authz/1.0`
+
+    - `docker.logdriver/1.0`
+
+    - `docker.metricscollector/1.0`
+
+  - `socket` string
+
+    Socket is the name of the socket the engine should use to communicate with the plugins.
+    the socket will be created in `/run/docker/plugins`.
+
+- `entrypoint` string array
+
+   Entrypoint of the plugin, see [`ENTRYPOINT`](https://docs.docker.com/reference/dockerfile/#entrypoint)
+
+- `workdir` string
+
+   Working directory of the plugin, see [`WORKDIR`](https://docs.docker.com/reference/dockerfile/#workdir)
+
+- `network` PluginNetwork
+
+  Network of the plugin, struct consisting of the following fields:
+
+  - `type` string
+
+    Network type.
+
+    Supported types:
+
+    - `bridge`
+    - `host`
+    - `none`
+
+- `mounts` PluginMount array
+
+  Mount of the plugin, struct consisting of the following fields.
+  See [`MOUNTS`](https://github.com/opencontainers/runtime-spec/blob/master/config.md#mounts).
+
+  - `name` string
+
+    Name of the mount.
+
+  - `description` string
+
+    Description of the mount.
+
+  - `source` string
+
+    Source of the mount.
+
+  - `destination` string
+
+    Destination of the mount.
+
+  - `type` string
+
+    Mount type.
+
+  - `options` string array
+
+    Options of the mount.
+
+- `ipchost` Boolean
+
+   Access to host ipc namespace.
+
+- `pidhost` Boolean
+
+   Access to host PID namespace.
+
+- `propagatedMount` string
+
+   Path to be mounted as rshared, so that mounts under that path are visible to
+   Docker. This is useful for volume plugins. This path will be bind-mounted
+   outside of the plugin rootfs so it's contents are preserved on upgrade.
+
+- `env` PluginEnv array
+
+  Environment variables of the plugin, struct consisting of the following fields:
+
+  - `name` string
+
+    Name of the environment variable.
+
+  - `description` string
+
+    Description of the environment variable.
+
+  - `value` string
+
+    Value of the environment variable.
+
+- `args` PluginArgs
+
+  Arguments of the plugin, struct consisting of the following fields:
+
+  - `name` string
+
+    Name of the arguments.
+
+  - `description` string
+
+    Description of the arguments.
+
+  - `value` string array
+
+    Values of the arguments.
+
+- `linux` PluginLinux
+
+  - `capabilities` string array
+
+    Capabilities of the plugin (Linux only), see list [`here`](https://github.com/opencontainers/runc/blob/master/libcontainer/SPEC.md#security)
+
+  - `allowAllDevices` Boolean
+
+    If `/dev` is bind mounted from the host, and allowAllDevices is set to true, the plugin will have `rwm` access to all devices on the host.
+
+  - `devices` PluginDevice array
+
+    Device of the plugin, (Linux only), struct consisting of the following fields.
+    See [`DEVICES`](https://github.com/opencontainers/runtime-spec/blob/master/config-linux.md#devices).
+
+    - `name` string
+
+      Name of the device.
+
+    - `description` string
+
+      Description of the device.
+
+    - `path` string
+
+      Path of the device.
+
+## Example Config
+
+The following example shows the 'tiborvass/sample-volume-plugin' plugin config.
+
+```json
+{
+  "Args": {
+    "Description": "",
+    "Name": "",
+    "Settable": null,
+    "Value": null
+  },
+  "Description": "A sample volume plugin for Docker",
+  "Documentation": "https://docs.docker.com/engine/extend/plugins/",
+  "Entrypoint": [
+    "/usr/bin/sample-volume-plugin",
+    "/data"
+  ],
+  "Env": [
+    {
+      "Description": "",
+      "Name": "DEBUG",
+      "Settable": [
+        "value"
+      ],
+      "Value": "0"
+    }
+  ],
+  "Interface": {
+    "Socket": "plugin.sock",
+    "Types": [
+      "docker.volumedriver/1.0"
+    ]
+  },
+  "Linux": {
+    "Capabilities": null,
+    "AllowAllDevices": false,
+    "Devices": null
+  },
+  "Mounts": null,
+  "Network": {
+    "Type": ""
+  },
+  "PropagatedMount": "/data",
+  "User": {},
+  "Workdir": ""
+}
+```

docs/extend/legacy_plugins.md

@@ -6,4 +6,94 @@ description: "How to add additional functionality to Docker with plugins extensi
 keywords: "Examples, Usage, plugins, docker, documentation, user guide"
 ---
 
-This content has moved to the [github.com/moby/moby](https://github.com/moby/moby/blob/v2.0.0-beta.29/docs/extend/) repository.
+This document describes the Docker Engine plugins generally available in Docker
+Engine. To view information on plugins managed by Docker,
+refer to [Docker Engine plugin system](_index.md).
+
+> [!NOTE]
+> Legacy plugins are superseded by Docker Engine's managed plugin system.
+> For plugins installed and managed by Docker, use
+> [`docker plugin install`](https://docs.docker.com/reference/cli/docker/plugin/install/)
+> and the [Docker Engine plugin system](_index.md). The third-party plugins
+> listed on this page are provided for historical reference, and archived
+> projects are marked accordingly.
+
+You can extend the capabilities of the Docker Engine by loading third-party
+plugins. This page explains the types of plugins and provides links to several
+volume and network plugins for Docker.
+
+## Types of plugins
+
+Plugins extend Docker's functionality. They come in specific types. For
+example, a [volume plugin](plugins_volume.md) might enable Docker
+volumes to persist across multiple Docker hosts and a
+[network plugin](plugins_network.md) might provide network plumbing.
+
+Currently Docker supports authorization, volume and network driver plugins. In the future it
+will support additional plugin types.
+
+## Installing a plugin
+
+Follow the instructions in the plugin's documentation.
+
+## Finding a plugin
+
+The sections below provide an overview of third-party plugins that use the
+legacy plugin model.
+
+### Network plugins
+
+| Plugin                                                                             | Description                                                                                                                                                                                                                                                                                                                                            |
+| :--------------------------------------------------------------------------------- | :----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| [Contiv Networking](https://github.com/contiv/netplugin)                           | An open source network plugin to provide infrastructure and security policies for a multi-tenant micro services deployment, while providing an integration to physical network for non-container workload. Contiv Networking implements the remote driver and IPAM APIs available in Docker 1.9 onwards.                                               |
+| [Kuryr Network Plugin](https://github.com/openstack/kuryr)                         | A network plugin is developed as part of the OpenStack Kuryr project and implements the Docker networking (libnetwork) remote driver API by utilizing Neutron, the OpenStack networking service. It includes an IPAM driver as well.                                                                                                                   |
+| [Kathará Network Plugin](https://github.com/KatharaFramework/NetworkPlugin)        | Docker Network Plugin used by Kathará, an open source container-based network emulation system for showing interactive demos/lessons, testing production networks in a sandbox environment, or developing new network protocols.                                                                                                                       |
+
+### Volume plugins
+
+| Plugin                                                                                             | Description                                                                                                                                                                                                                                                                                                   |
+|:---------------------------------------------------------------------------------------------------|:--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+| [Azure File Storage plugin](https://github.com/Azure/azurefile-dockervolumedriver) (archived)      | Lets you mount Microsoft [Azure File Storage](https://azure.microsoft.com/blog/azure-file-storage-now-generally-available/) shares to Docker containers as volumes using the SMB 3.0 protocol. [Learn more](https://azure.microsoft.com/blog/persistent-docker-volumes-with-azure-file-storage/).             |
+| [BeeGFS Volume Plugin](https://github.com/RedCoolBeans/docker-volume-beegfs)                       | An open source volume plugin to create persistent volumes in a BeeGFS parallel file system.                                                                                                                                                                                                                   |
+| [Blockbridge plugin](https://github.com/blockbridge/blockbridge-docker-volume)                     | A volume plugin that provides access to an extensible set of container-based persistent storage options. It supports single and multi-host Docker environments with features that include tenant isolation, automated provisioning, encryption, secure deletion, snapshots and QoS.                           |
+| [Contiv Volume Plugin](https://github.com/contiv/volplugin)                                        | An open source volume plugin that provides multi-tenant, persistent, distributed storage with intent based consumption. It has support for Ceph and NFS.                                                                                                                                                      |
+| [Convoy plugin](https://github.com/rancher/convoy) (archived)                                      | A volume plugin for a variety of storage back-ends including device mapper and NFS. It's a simple standalone executable written in Go and provides the framework to support vendor-specific extensions such as snapshots, backups and restore.                                                                |
+| [DigitalOcean Block Storage plugin](https://github.com/omallo/docker-volume-plugin-dostorage)      | Integrates DigitalOcean's [block storage solution](https://www.digitalocean.com/products/storage/) into the Docker ecosystem by automatically attaching a given block storage volume to a DigitalOcean droplet and making the contents of the volume available to Docker containers running on that droplet.  |
+| [DRBD plugin](https://www.drbd.org/en/supported-projects/docker)                                   | A volume plugin that provides highly available storage replicated by [DRBD](https://www.drbd.org). Data written to the docker volume is replicated in a cluster of DRBD nodes.                                                                                                                                |
+| [Flocker plugin](https://github.com/ScatterHQ/flocker) (archived)                                  | A volume plugin that provides multi-host portable volumes for Docker, enabling you to run databases and other stateful containers and move them around across a cluster of machines.                                                                                                                          |
+| [Fuxi Volume Plugin](https://github.com/openstack-archive/fuxi) (archived)                         | A volume plugin that is developed as part of the OpenStack Kuryr project and implements the Docker volume plugin API by utilizing Cinder, the OpenStack block storage service.                                                                                                                                |
+| [gce-docker plugin](https://github.com/mcuadros/gce-docker) (archived)                             | A volume plugin able to attach, format and mount Google Compute [persistent-disks](https://cloud.google.com/compute/docs/disks/persistent-disks).                                                                                                                                                             |
+| [GlusterFS plugin](https://github.com/calavera/docker-volume-glusterfs) (archived)                 | A volume plugin that provides multi-host volumes management for Docker using GlusterFS.                                                                                                                                                                                                                       |
+| [Horcrux Volume Plugin](https://github.com/muthu-r/horcrux)                                        | A volume plugin that allows on-demand, version controlled access to your data. Horcrux is an open-source plugin, written in Go, and supports SCP, [Minio](https://www.minio.io) and Amazon S3.                                                                                                                |
+| [HPE 3Par Volume Plugin](https://github.com/hpe-storage/python-hpedockerplugin/)                   | A volume plugin that supports HPE 3Par and StoreVirtual iSCSI storage arrays.                                                                                                                                                                                                                                 |
+| [IPFS Volume Plugin](https://github.com/vdemeester/docker-volume-ipfs) (archived)                  | An open source volume plugin that allows using an [ipfs](https://ipfs.io/) filesystem as a volume.                                                                                                                                                                                                            |
+| [Keywhiz plugin](https://github.com/calavera/docker-volume-keywhiz) (archived)                     | A plugin that provides credentials and secret management using Keywhiz as a central repository.                                                                                                                                                                                                               |
+| [Linode Volume Plugin](https://github.com/linode/docker-volume-linode)                             | A plugin that adds the ability to manage Linode Block Storage as Docker Volumes from within a Linode. |
+| [Local Persist Plugin](https://github.com/CWSpear/local-persist)                                   | A volume plugin that extends the default `local` driver's functionality by allowing you specify a mountpoint anywhere on the host, which enables the files to *always persist*, even if the volume is removed via `docker volume rm`.                                                                         |
+| [NetApp Plugin](https://github.com/NetApp/netappdvp) (nDVP)                                        | A volume plugin that provides direct integration with the Docker ecosystem for the NetApp storage portfolio. The nDVP package supports the provisioning and management of storage resources from the storage platform to Docker hosts, with a robust framework for adding additional platforms in the future. |
+| [Netshare plugin](https://github.com/ContainX/docker-volume-netshare)                              | A volume plugin that provides volume management for NFS 3/4, AWS EFS and CIFS file systems.                                                                                                                                                                                                                   |
+| [Nimble Storage Volume Plugin](https://scod.hpedev.io/docker_volume_plugins/hpe_nimble_storage/index.html) | A volume plug-in that integrates with Nimble Storage Unified Flash Fabric arrays. The plug-in abstracts array volume capabilities to the Docker administrator to allow self-provisioning of secure multi-tenant volumes and clones.                                                                           |
+| [OpenStorage Plugin](https://github.com/libopenstorage/openstorage)                                | A cluster-aware volume plugin that provides volume management for file and block storage solutions.  It implements a vendor neutral specification for implementing extensions such as CoS, encryption, and snapshots. It has example drivers based on FUSE, NFS, NBD and EBS to name a few.                   |
+| [Portworx Volume Plugin](https://github.com/portworx/px-dev)                                       | A volume plugin that turns any server into a scale-out converged compute/storage node, providing container granular storage and highly available volumes across any node, using a shared-nothing storage backend that works with any docker scheduler.                                                        |
+| [Quobyte Volume Plugin](https://github.com/quobyte/docker-volume)                                  | A volume plugin that connects Docker to [Quobyte](https://www.quobyte.com/containers)'s data center file system, a general-purpose scalable and fault-tolerant storage platform.                                                                                                                               |
+| [REX-Ray plugin](https://github.com/emccode/rexray)                                                | A volume plugin which is written in Go and provides advanced storage functionality for many platforms including VirtualBox, EC2, Google Compute Engine, OpenStack, and EMC.                                                                                                                                   |
+| [Virtuozzo Storage and Ploop plugin](https://github.com/virtuozzo/docker-volume-ploop)             | A volume plugin with support for Virtuozzo Storage distributed cloud file system as well as ploop devices.                                                                                                                                                                                                    |
+| [VMware vSphere Storage Plugin](https://github.com/vmware/docker-volume-vsphere)                   | Docker Volume Driver for vSphere enables customers to address persistent storage requirements for Docker containers in vSphere environments.                                                                                                                                                                  |
+
+### Authorization plugins
+
+| Plugin                                                               | Description                                                                                                                                                                                                                                                                                                                          |
+|:---------------------------------------------------------------------|:-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+| [Casbin AuthZ Plugin](https://github.com/casbin/casbin-authz-plugin) | An authorization plugin based on [Casbin](https://github.com/casbin/casbin), which supports access control models like ACL, RBAC, ABAC. The access control model can be customized. The policy can be persisted into file or DB.                                                                                                     |
+| [HBM plugin](https://github.com/kassisol/hbm)                        | An authorization plugin that prevents from executing commands with certains parameters.                                                                                                                                                                                                                                              |
+| [Twistlock AuthZ Broker](https://github.com/twistlock/authz)         | A basic extendable authorization plugin that runs directly on the host or inside a container. This plugin allows you to define user policies that it evaluates during authorization. Basic authorization is provided if Docker daemon is started with the --tlsverify flag (username is extracted from the certificate common name). |
+
+## Troubleshooting a plugin
+
+If you are having problems with Docker after loading a plugin, ask the authors
+of the plugin for help. The Docker team may not be able to assist you.
+
+## Writing a plugin
+
+If you are interested in writing a plugin for Docker, or seeing how they work
+under the hood, see the [Docker plugins reference](plugin_api.md).

docs/extend/plugin_api.md

@@ -4,4 +4,183 @@ description: "How to write Docker plugins extensions "
 keywords: "API, Usage, plugins, documentation, developer"
 ---
 
-This content has moved to the [github.com/moby/moby](https://github.com/moby/moby/blob/v2.0.0-beta.29/docs/extend/) repository.
+Docker plugins are out-of-process extensions which add capabilities to the
+Docker Engine.
+
+This document describes the Docker Engine plugin API. To view information on
+plugins managed by Docker Engine, refer to [Docker Engine plugin system](_index.md).
+
+This page is intended for people who want to develop their own Docker plugin.
+If you just want to learn about or use Docker plugins, look
+[here](legacy_plugins.md).
+
+## What plugins are
+
+A plugin is a process running on the same or a different host as the Docker daemon,
+which registers itself by placing a file on the daemon host in one of the plugin
+directories described in [Plugin discovery](#plugin-discovery).
+
+Plugins have human-readable names, which are short, lowercase strings. For
+example, `myplugin`.
+
+Plugins can run inside or outside containers. Currently running them outside
+containers is recommended.
+
+## Plugin discovery
+
+Docker discovers plugins by looking for them in the plugin directory whenever a
+user or container tries to use one by name.
+
+There are three types of files which can be put in the plugin directory.
+
+* `.sock` files are Unix domain sockets.
+* `.spec` files are text files containing a URL, such as `unix:///other.sock` or `tcp://localhost:8080`.
+* `.json` files are text files containing a full json specification for the plugin.
+
+Plugins with Unix domain socket files must run on the same host as the Docker daemon.
+Plugins with `.spec` or `.json` files can run on a different host if you specify a remote URL.
+
+Unix domain socket files must be located under `/run/docker/plugins`, whereas
+spec files can be located either under `/etc/docker/plugins` or `/usr/lib/docker/plugins`.
+
+The name of the file (excluding the extension) determines the plugin name.
+
+For example, a plugin named `myplugin` might create a Unix socket at
+`/run/docker/plugins/myplugin.sock`.
+
+You can define each plugin into a separated subdirectory if you want to isolate definitions from each other.
+For example, you can create the `myplugin` socket under `/run/docker/plugins/myplugin/myplugin.sock` and only
+mount `/run/docker/plugins/myplugin` inside the `myplugin` container.
+
+Docker always searches for Unix sockets in `/run/docker/plugins` first. It checks for spec or json files under
+`/etc/docker/plugins` and `/usr/lib/docker/plugins` if the socket doesn't exist. The directory scan stops as
+soon as it finds the first plugin definition with the given name.
+
+### JSON specification
+
+This is the JSON format for a plugin:
+
+```json
+{
+  "Name": "plugin-example",
+  "Addr": "https://example.com/docker/plugin",
+  "TLSConfig": {
+    "InsecureSkipVerify": false,
+    "CAFile": "/usr/shared/docker/certs/example-ca.pem",
+    "CertFile": "/usr/shared/docker/certs/example-cert.pem",
+    "KeyFile": "/usr/shared/docker/certs/example-key.pem"
+  }
+}
+```
+
+The `TLSConfig` field is optional and TLS will only be verified if this configuration is present.
+
+## Plugin lifecycle
+
+Plugins should be started before Docker, and stopped after Docker. For
+example, when packaging a plugin for a platform which supports `systemd`, you
+might use [`systemd` dependencies](
+https://www.freedesktop.org/software/systemd/man/systemd.unit.html#Before=) to
+manage startup and shutdown order.
+
+When upgrading a plugin, you should first stop the Docker daemon, upgrade the
+plugin, then start Docker again.
+
+## Plugin activation
+
+When a plugin is first referred to -- either by a user referring to it by name
+(e.g.  `docker run --volume-driver=foo`) or a container already configured to
+use a plugin being started -- Docker looks for the named plugin in the plugin
+directory and activates it with a handshake. See Handshake API below.
+
+Plugins are not activated automatically at Docker daemon startup. Rather,
+they are activated only lazily, or on-demand, when they are needed.
+
+## Systemd socket activation
+
+Plugins may also be socket activated by `systemd`. The official [Plugins helpers](https://github.com/docker/go-plugins-helpers)
+natively supports socket activation. In order for a plugin to be socket activated it needs
+a `service` file and a `socket` file.
+
+The `service` file (for example `/lib/systemd/system/your-plugin.service`):
+
+```systemd
+[Unit]
+Description=Your plugin
+Before=docker.service
+After=network.target your-plugin.socket
+Requires=your-plugin.socket docker.service
+
+[Service]
+ExecStart=/usr/lib/docker/your-plugin
+
+[Install]
+WantedBy=multi-user.target
+```
+
+The `socket` file (for example `/lib/systemd/system/your-plugin.socket`):
+
+```systemd
+[Unit]
+Description=Your plugin
+
+[Socket]
+ListenStream=/run/docker/plugins/your-plugin.sock
+
+[Install]
+WantedBy=sockets.target
+```
+
+This will allow plugins to be actually started when the Docker daemon connects to
+the sockets they're listening on (for instance the first time the daemon uses them
+or if one of the plugin goes down accidentally).
+
+## API design
+
+The Plugin API is RPC-style JSON over HTTP, much like webhooks.
+
+Requests flow from the Docker daemon to the plugin. The plugin needs to
+implement an HTTP server and bind this to the Unix socket mentioned in the
+"plugin discovery" section.
+
+All requests are HTTP `POST` requests.
+
+The API is versioned via an Accept header, which currently is always set to
+`application/vnd.docker.plugins.v1+json`.
+
+## Handshake API
+
+Plugins are activated via the following "handshake" API call.
+
+### /Plugin.Activate
+
+Request: empty body
+
+Response:
+
+```json
+{
+    "Implements": ["VolumeDriver"]
+}
+```
+
+Responds with a list of Docker subsystems which this plugin implements.
+After activation, the plugin will then be sent events from this subsystem.
+
+Possible values are:
+
+* [`authz`](plugins_authorization.md)
+* [`NetworkDriver`](plugins_network.md)
+* [`VolumeDriver`](plugins_volume.md)
+
+## Plugin retries
+
+Attempts to call a method on a plugin are retried with an exponential backoff
+for up to 30 seconds. This may help when packaging plugins as containers, since
+it gives plugin containers a chance to start up before failing any user
+containers which depend on them.
+
+## Plugins helpers
+
+To ease plugins development, we're providing an `sdk` for each kind of plugins
+currently supported by Docker at [docker/go-plugins-helpers](https://github.com/docker/go-plugins-helpers).

docs/extend/plugins_authorization.md

@@ -6,4 +6,280 @@ aliases:
 - "/engine/extend/authorization/"
 ---
 
-This content has moved to the [github.com/moby/moby](https://github.com/moby/moby/blob/v2.0.0-beta.29/docs/extend/) repository.
+This document describes the Docker Engine plugins available in Docker
+Engine. To view information on plugins managed by Docker Engine,
+refer to [Docker Engine plugin system](_index.md).
+
+Docker's out-of-the-box authorization model is all or nothing. Any user with
+permission to access the Docker daemon can run any Docker client command. The
+same is true for callers using Docker's Engine API to contact the daemon. If you
+require greater access control, you can create authorization plugins and add
+them to your Docker daemon configuration. Using an authorization plugin, a
+Docker administrator can configure granular access policies for managing access
+to the Docker daemon.
+
+Anyone with the appropriate skills can develop an authorization plugin. These
+skills, at their most basic, are knowledge of Docker, understanding of REST, and
+sound programming knowledge. This document describes the architecture, state,
+and methods information available to an authorization plugin developer.
+
+## Basic principles
+
+Docker's [plugin infrastructure](plugin_api.md) enables
+extending Docker by loading, removing and communicating with
+third-party components using a generic API. The access authorization subsystem
+was built using this mechanism.
+
+Using this subsystem, you don't need to rebuild the Docker daemon to add an
+authorization plugin. You can add a plugin to an installed Docker daemon. You do
+need to restart the Docker daemon to add a new plugin.
+
+An authorization plugin approves or denies requests to the Docker daemon based
+on both the current authentication context and the command context. The
+authentication context contains all user details and the authentication method.
+The command context contains all the relevant request data.
+
+Authorization plugins must follow the rules described in [Docker Plugin API](plugin_api.md).
+Each plugin must reside within directories described under the
+[Plugin discovery](plugin_api.md#plugin-discovery) section.
+
+> [!NOTE]
+> The abbreviations `AuthZ` and `AuthN` mean authorization and authentication
+> respectively.
+
+## Default user authorization mechanism
+
+If TLS is enabled in the [Docker daemon](https://docs.docker.com/engine/security/https/), the default user authorization flow extracts the user details from the certificate subject name.
+That is, the `User` field is set to the client certificate subject common name, and the `AuthenticationMethod` field is set to `TLS`.
+
+## Basic architecture
+
+You are responsible for registering your plugin as part of the Docker daemon
+startup. You can install multiple plugins and chain them together. This chain
+can be ordered. Each request to the daemon passes in order through the chain.
+Only when all the plugins grant access to the resource, is the access granted.
+
+When an HTTP request is made to the Docker daemon through the CLI or via the
+Engine API, the authentication subsystem passes the request to the installed
+authentication plugin(s). The request contains the user (caller) and command
+context. The plugin is responsible for deciding whether to allow or deny the
+request.
+
+The sequence diagrams below depict an allow and deny authorization flow:
+
+![Authorization Allow flow](images/authz_allow.png)
+
+![Authorization Deny flow](images/authz_deny.png)
+
+Each request sent to the plugin includes the authenticated user, the HTTP
+headers, and the request/response body. Only the user name and the
+authentication method used are passed to the plugin. Most importantly, no user
+credentials or tokens are passed.
+
+> [!NOTE]
+> Authorization plugins enforce requests to the Docker daemon's HTTP API only. gRPC method
+> calls, whether dispatched natively or upgraded through `POST /grpc`, are not subject to authorization.
+> Furthermore, HTTP request/response bodies where the `Content-Type` is `application/json` are forwarded;
+> bodies of any other type are not visible to the plugin and cannot be used for enforcement,
+> even though the daemon acts on this data.
+
+For commands that can potentially hijack the HTTP connection (`HTTP
+Upgrade`), such as `exec`, the authorization plugin is only called for the
+initial HTTP requests. Once the plugin approves the command, authorization is
+not applied to the rest of the flow. Specifically, the streaming data is not
+passed to the authorization plugins. For commands that return chunked HTTP
+response, such as `logs` and `events`, only the HTTP request is sent to the
+authorization plugins.
+
+The Engine's authorization middleware fails closed: when a plugin returns an error or returns `Allow: false`,
+the request is denied and the error is surfaced to the client. Plugins should also fail closed: if the plugin
+cannot confidently evaluate a request, it should return an error or `Allow: false`.
+
+> [!WARNING]
+> Because the plugin receives the [**raw** request body](#authzpluginauthzreq) from the daemon, it must
+> apply the same decoding semantics as the daemon to be sure it evaluates the request the daemon will
+> act on. The daemon decodes JSON with Go's [`encoding/json.Unmarshal`](https://pkg.go.dev/encoding/json#Unmarshal).
+>
+> The same requirement applies to the response body. Plugins that depend on `ResponseBody`
+> inspection for redaction or content-filtering should restrict their policies to endpoints
+> whose response is produced as a single write (typical of REST-style API responses). For
+> commands whose responses are streamed or are likely to exceed the [buffer](#response-body-size-and-partial-buffering) through multiple
+> writes, do not rely on `ResponseBody` for security-relevant decisions; perform the filtering
+> in a separate layer in front of the daemon.
+
+### Response body size and partial buffering
+
+The internal buffer that holds the response body between the daemon's HTTP
+handler and the plugin's response authorization callback (`responseModifier`,
+defined in [`pkg/authorization/response.go`](https://github.com/moby/moby/blob/master/pkg/authorization/response.go))
+has a fixed capacity of 64 KiB (`maxBufferSize`).
+
+For most non-streaming endpoints the full response is buffered for plugin
+inspection regardless of total size, because Go's `encoding/json` encoder
+serializes the complete payload into a single underlying write. The
+streaming-response exclusion noted above (for example, `logs` and `events`)
+is the practical effect of this 64 KiB threshold combined with the
+`io.WriteFlusher` write pattern used by streaming handlers, where each write
+is immediately drained to the client and is therefore no longer available
+for plugin inspection by the time the handler returns.
+
+During request/response processing, some authorization flows might
+need to do additional queries to the Docker daemon. To complete such flows,
+plugins can call the daemon API similar to a regular user. To enable these
+additional queries, the plugin must provide the means for an administrator to
+configure proper authentication and security policies.
+
+## Docker client flows
+
+To enable and configure the authorization plugin, the plugin developer must
+support the Docker client interactions detailed in this section.
+
+### Setting up Docker daemon
+
+Enable the authorization plugin with a dedicated command line flag in the
+`--authorization-plugin=PLUGIN_ID` format. The flag supplies a `PLUGIN_ID`
+value. This value can be the plugin’s socket or a path to a specification file.
+Authorization plugins can be loaded without restarting the daemon. Refer
+to the [`dockerd` documentation](https://docs.docker.com/reference/cli/dockerd/#configuration-reload-behavior) for more information.
+
+```console
+$ dockerd --authorization-plugin=plugin1 --authorization-plugin=plugin2,...
+```
+
+Docker's authorization subsystem supports multiple `--authorization-plugin` parameters.
+
+### Calling authorized command (allow)
+
+```console
+$ docker pull centos
+<...>
+f1b10cd84249: Pull complete
+<...>
+```
+
+### Calling unauthorized command (deny)
+
+```console
+$ docker pull centos
+<...>
+docker: Error response from daemon: authorization denied by plugin PLUGIN_NAME: volumes are not allowed.
+```
+
+### Error from plugins
+
+```console
+$ docker pull centos
+<...>
+docker: Error response from daemon: plugin PLUGIN_NAME failed with error: AuthZPlugin.AuthZReq: Cannot connect to the Docker daemon. Is the docker daemon running on this host?.
+```
+
+## API schema and implementation
+
+In addition to Docker's standard plugin registration method, each plugin
+should implement the following two methods:
+
+* `/AuthZPlugin.AuthZReq` This authorize request method is called before the Docker daemon processes the client request.
+
+* `/AuthZPlugin.AuthZRes` This authorize response method is called before the response is returned from Docker daemon to the client.
+
+#### /AuthZPlugin.AuthZReq
+
+Request
+
+```json
+{
+    "User":              "The user identification",
+    "UserAuthNMethod":   "The authentication method used",
+    "RequestMethod":     "The HTTP method",
+    "RequestURI":        "The HTTP request URI",
+    "RequestBody":       "Byte array containing the raw HTTP request body",
+    "RequestHeader":     "Byte array containing the raw HTTP request header as a map[string][]string "
+}
+```
+
+Response
+
+```json
+{
+    "Allow": "Determined whether the user is allowed or not",
+    "Msg":   "The authorization message",
+    "Err":   "The error message if things go wrong"
+}
+```
+
+#### /AuthZPlugin.AuthZRes
+
+Request:
+
+```json
+{
+    "User":              "The user identification",
+    "UserAuthNMethod":   "The authentication method used",
+    "RequestMethod":     "The HTTP method",
+    "RequestURI":        "The HTTP request URI",
+    "RequestBody":       "Byte array containing the raw HTTP request body",
+    "RequestHeader":     "Byte array containing the raw HTTP request header as a map[string][]string",
+    "ResponseBody":      "Byte array containing the raw HTTP response body",
+    "ResponseHeader":    "Byte array containing the raw HTTP response header as a map[string][]string",
+    "ResponseStatusCode":"Response status code"
+}
+```
+
+Response:
+
+```json
+{
+   "Allow":              "Determined whether the user is allowed or not",
+   "Msg":                "The authorization message",
+   "Err":                "The error message if things go wrong"
+}
+```
+
+### Request authorization
+
+Each plugin must support two request authorization messages formats, one from the daemon to the plugin and then from the plugin to the daemon. The tables below detail the content expected in each message.
+
+#### Daemon -> Plugin
+
+Name                   | Type              | Description
+-----------------------|-------------------|-------------------------------------------------------
+User                   | string            | The user identification
+Authentication method  | string            | The authentication method used
+Request method         | enum              | The HTTP method (GET/DELETE/POST)
+Request URI            | string            | The HTTP request URI including API version, as sent by the client (e.g., v.1.17/containers/json)
+Request headers        | map[string]string | Request headers as key value pairs (without the authorization header)
+Request body           | []byte            | Raw request body
+
+#### Plugin -> Daemon
+
+Name    | Type   | Description
+--------|--------|----------------------------------------------------------------------------------
+Allow   | bool   | Boolean value indicating whether the request is allowed or denied
+Msg     | string | Authorization message (will be returned to the client in case the access is denied)
+Err     | string | Error message (will be returned to the client in case the plugin encounter an error. The string value supplied may appear in logs, so should not include confidential information)
+
+### Response authorization
+
+The plugin must support two authorization messages formats, one from the daemon to the plugin and then from the plugin to the daemon. The tables below detail the content expected in each message.
+
+#### Daemon -> Plugin
+
+Name                    | Type              | Description
+----------------------- |------------------ |----------------------------------------------------
+User                    | string            | The user identification
+Authentication method   | string            | The authentication method used
+Request method          | string            | The HTTP method (GET/DELETE/POST)
+Request URI             | string            | The HTTP request URI including API version, as sent by the client (e.g., v.1.17/containers/json)
+Request headers         | map[string]string | Request headers as key value pairs (without the authorization header)
+Request body            | []byte            | Raw request body
+Response status code    | int               | Status code from the Docker daemon
+Response headers        | map[string]string | Response headers as key value pairs
+Response body           | []byte            | Raw Docker daemon response body
+
+#### Plugin -> Daemon
+
+Name    | Type   | Description
+--------|--------|----------------------------------------------------------------------------------
+Allow   | bool   | Boolean value indicating whether the response is allowed or denied
+Msg     | string | Authorization message (will be returned to the client in case the access is denied)
+Err     | string | Error message (will be returned to the client in case the plugin encounter an error. The string value supplied may appear in logs, so should not include confidential information)

docs/extend/plugins_logging.md

@@ -4,4 +4,212 @@ description: "Log driver plugins."
 keywords: "Examples, Usage, plugins, docker, documentation, user guide, logging"
 ---
 
-This content has moved to the [github.com/moby/moby](https://github.com/moby/moby/blob/v2.0.0-beta.29/docs/extend/) repository.
+This document describes logging driver plugins for Docker.
+
+Logging drivers enables users to forward container logs to another service for
+processing. Docker includes several logging drivers as built-ins, however can
+never hope to support all use-cases with built-in drivers. Plugins allow Docker
+to support a wide range of logging services without requiring to embed client
+libraries for these services in the main Docker codebase. See the
+[plugin documentation](legacy_plugins.md) for more information.
+
+## Create a logging plugin
+
+The main interface for logging plugins uses the same JSON+HTTP RPC protocol used
+by other plugin types. See the
+[example](https://github.com/cpuguy83/docker-log-driver-test) plugin for a
+reference implementation of a logging plugin. The example wraps the built-in
+`jsonfilelog` log driver.
+
+## LogDriver protocol
+
+Logging plugins must register as a `LogDriver` during plugin activation. Once
+activated users can specify the plugin as a log driver.
+
+There are two HTTP endpoints that logging plugins must implement:
+
+### `/LogDriver.StartLogging`
+
+Signals to the plugin that a container is starting that the plugin should start
+receiving logs for.
+
+Logs will be streamed over the defined file in the request. On Linux this file
+is a FIFO. Logging plugins are not currently supported on Windows.
+
+Request:
+
+```json
+{
+  "File": "/path/to/file/stream",
+  "Info": {
+          "ContainerID": "123456"
+  }
+}
+```
+
+`File` is the path to the log stream that needs to be consumed. Each call to
+`StartLogging` should provide a different file path, even if it's a container
+that the plugin has already received logs for prior. The file is created by
+Docker with a randomly generated name.
+
+`Info` is details about the container that's being logged. This is fairly
+free-form, but is defined by the following struct definition:
+
+```go
+type Info struct {
+	Config              map[string]string
+	ContainerID         string
+	ContainerName       string
+	ContainerEntrypoint string
+	ContainerArgs       []string
+	ContainerImageID    string
+	ContainerImageName  string
+	ContainerCreated    time.Time
+	ContainerEnv        []string
+	ContainerLabels     map[string]string
+	LogPath             string
+	DaemonName          string
+}
+```
+
+`ContainerID` will always be supplied with this struct, but other fields may be
+empty or missing.
+
+Response:
+
+```json
+{
+  "Err": ""
+}
+```
+
+If an error occurred during this request, add an error message to the `Err` field
+in the response. If no error then you can either send an empty response (`{}`)
+or an empty value for the `Err` field.
+
+The driver should at this point be consuming log messages from the passed in file.
+If messages are unconsumed, it may cause the container to block while trying to
+write to its stdio streams.
+
+Log stream messages are encoded as protocol buffers. The protobuf definitions are
+in the
+[moby repository](https://github.com/moby/moby/blob/master/api/types/plugins/logdriver/entry.proto).
+
+Since protocol buffers are not self-delimited you must decode them from the stream
+using the following stream format:
+
+```text
+[size][message]
+```
+
+Where `size` is a 4-byte big endian binary encoded uint32. `size` in this case
+defines the size of the next message. `message` is the actual log entry.
+
+A reference golang implementation of a stream encoder/decoder can be found
+[here](https://github.com/docker/docker/blob/master/api/types/plugins/logdriver/io.go)
+
+### `/LogDriver.StopLogging`
+
+Signals to the plugin to stop collecting logs from the defined file.
+Once a response is received, the file will be removed by Docker. You must make
+sure to collect all logs on the stream before responding to this request or risk
+losing log data.
+
+Requests on this endpoint does not mean that the container has been removed
+only that it has stopped.
+
+Request:
+
+```json
+{
+  "File": "/path/to/file/stream"
+}
+```
+
+Response:
+
+```json
+{
+  "Err": ""
+}
+```
+
+If an error occurred during this request, add an error message to the `Err` field
+in the response. If no error then you can either send an empty response (`{}`)
+or an empty value for the `Err` field.
+
+## Optional endpoints
+
+Logging plugins can implement two extra logging endpoints:
+
+### `/LogDriver.Capabilities`
+
+Defines the capabilities of the log driver. You must implement this endpoint for
+Docker to be able to take advantage of any of the defined capabilities.
+
+Request:
+
+```json
+{}
+```
+
+Response:
+
+```json
+{
+  "ReadLogs": true
+}
+```
+
+Supported capabilities:
+
+- `ReadLogs` - this tells Docker that the plugin is capable of reading back logs
+to clients. Plugins that report that they support `ReadLogs` must implement the
+`/LogDriver.ReadLogs` endpoint
+
+### `/LogDriver.ReadLogs`
+
+Reads back logs to the client. This is used when `docker logs <container>` is
+called.
+
+In order for Docker to use this endpoint, the plugin must specify as much when
+`/LogDriver.Capabilities` is called.
+
+Request:
+
+```json
+{
+  "ReadConfig": {},
+  "Info": {
+    "ContainerID": "123456"
+  }
+}
+```
+
+`ReadConfig` is the list of options for reading, it is defined with the following
+golang struct:
+
+```go
+type ReadConfig struct {
+	Since  time.Time
+	Tail   int
+	Follow bool
+}
+```
+
+- `Since` defines the oldest log that should be sent.
+- `Tail` defines the number of lines to read (e.g. like the command `tail -n 10`)
+- `Follow` signals that the client wants to stay attached to receive new log messages
+as they come in once the existing logs have been read.
+
+`Info` is the same type defined in `/LogDriver.StartLogging`. It should be used
+to determine what set of logs to read.
+
+Response:
+
+```text
+{{ log stream }}
+```
+
+The response should be the encoded log message using the same format as the
+messages that the plugin consumed from Docker.

docs/extend/plugins_metrics.md

@@ -4,4 +4,76 @@ description: "Metrics plugins."
 keywords: "Examples, Usage, plugins, docker, documentation, user guide, metrics"
 ---
 
-This content has moved to the [github.com/moby/moby](https://github.com/moby/moby/blob/v2.0.0-beta.29/docs/extend/) repository.
+Docker exposes internal metrics based on the Prometheus format. Metrics plugins
+enable accessing these metrics in a consistent way by providing a Unix
+socket at a predefined path where the plugin can scrape the metrics.
+
+> [!NOTE]
+> While the plugin interface for metrics is non-experimental, the naming of the
+> metrics and metric labels is still considered experimental and may change in a
+> future version.
+
+## Creating a metrics plugin
+
+You must currently set `PropagatedMount` in the plugin `config.json` to
+`/run/docker`. This allows the plugin to receive updated mounts
+(the bind-mounted socket) from Docker after the plugin is already configured.
+
+## MetricsCollector protocol
+
+Metrics plugins must register as implementing the`MetricsCollector` interface
+in `config.json`.
+
+On Unix platforms, the socket is located at `/run/docker/metrics.sock` in the
+plugin's rootfs.
+
+`MetricsCollector` must implement two endpoints:
+
+### `MetricsCollector.StartMetrics`
+
+Signals to the plugin that the metrics socket is now available for scraping
+
+Request:
+
+```json
+{}
+```
+
+The request has no payload.
+
+Response:
+
+```json
+{
+  "Err": ""
+}
+```
+
+If an error occurred during this request, add an error message to the `Err` field
+in the response. If no error then you can either send an empty response (`{}`)
+or an empty value for the `Err` field. Errors will only be logged.
+
+### `MetricsCollector.StopMetrics`
+
+Signals to the plugin that the metrics socket is no longer available.
+This may happen when the daemon is shutting down.
+
+Request:
+
+```json
+{}
+```
+
+The request has no payload.
+
+Response:
+
+```json
+{
+  "Err": ""
+}
+```
+
+If an error occurred during this request, add an error message to the `Err` field
+in the response. If no error then you can either send an empty response (`{}`)
+or an empty value for the `Err` field. Errors will only be logged.

docs/extend/plugins_network.md

@@ -4,4 +4,61 @@ description: "Network driver plugins."
 keywords: "Examples, Usage, plugins, docker, documentation, user guide"
 ---
 
-This content has moved to the [github.com/moby/moby](https://github.com/moby/moby/blob/v2.0.0-beta.29/docs/extend/) repository.
+This document describes Docker Engine network driver plugins generally
+available in Docker Engine. To view information on plugins
+managed by Docker Engine, refer to [Docker Engine plugin system](_index.md).
+
+Docker Engine network plugins enable Engine deployments to be extended to
+support a wide range of networking technologies, such as VXLAN, IPVLAN, MACVLAN
+or something completely different. Network driver plugins are supported via the
+LibNetwork project. Each plugin is implemented as a "remote driver" for
+LibNetwork, which shares plugin infrastructure with Engine. Effectively, network
+driver plugins are activated in the same way as other plugins, and use the same
+kind of protocol.
+
+## Network plugins and Swarm mode
+
+[Legacy plugins](legacy_plugins.md) do not work in Swarm mode. However,
+plugins written using the [v2 plugin system](_index.md) do work in Swarm mode, as
+long as they are installed on each Swarm worker node.
+
+## Use network driver plugins
+
+The means of installing and running a network driver plugin depend on the
+particular plugin. So, be sure to install your plugin according to the
+instructions obtained from the plugin developer.
+
+Once running however, network driver plugins are used just like the built-in
+network drivers: by being mentioned as a driver in network-oriented Docker
+commands. For example,
+
+```console
+$ docker network create --driver weave mynet
+```
+
+Some network driver plugins are listed in [plugins](legacy_plugins.md)
+
+The `mynet` network is now owned by `weave`, so subsequent commands
+referring to that network will be sent to the plugin,
+
+```console
+$ docker run --network=mynet busybox top
+```
+
+## Find network plugins
+
+Network plugins are written by third parties, and are published by those
+third parties, either on
+[Docker Hub](https://hub.docker.com/search?q=&type=plugin)
+or on the third party's site.
+
+## Write a network plugin
+
+Network plugins implement the [Docker plugin API](plugin_api.md) and the network
+plugin protocol
+
+## Network plugin protocol
+
+The network driver protocol, in addition to the plugin activation call, is
+documented as part of libnetwork:
+[https://github.com/moby/moby/blob/master/daemon/libnetwork/docs/remote.md](https://github.com/moby/moby/blob/master/daemon/libnetwork/docs/remote.md).

docs/extend/plugins_services.md

@@ -3,4 +3,182 @@ keywords: "API, Usage, plugins, documentation, developer"
 title: Plugins and Services
 ---
 
-This content has moved to the [github.com/moby/moby](https://github.com/moby/moby/blob/v2.0.0-beta.29/docs/extend/) repository.
+<!-- This file is maintained within the docker/cli GitHub
+     repository at https://github.com/docker/cli/. Make all
+     pull requests against that repo. If you see this file in
+     another repository, consider it read-only there, as it will
+     periodically be overwritten by the definitive file. Pull
+     requests which include edits to this file in other repositories
+     will be rejected.
+-->
+
+# Using Volume and Network plugins in Docker services
+
+In swarm mode, it is possible to create a service that allows for attaching
+to networks or mounting volumes that are backed by plugins. Swarm schedules
+services based on plugin availability on a node.
+
+
+### Volume plugins
+
+In this example, a volume plugin is installed on a swarm worker and a volume
+is created using the plugin. In the manager, a service is created with the
+relevant mount options. It can be observed that the service is scheduled to
+run on the worker node with the said volume plugin and volume. Note that,
+node1 is the manager and node2 is the worker.
+
+1.  Prepare manager. In node 1:
+
+    ```console
+    $ docker swarm init
+    Swarm initialized: current node (dxn1zf6l61qsb1josjja83ngz) is now a manager.
+    ```
+
+2. Join swarm, install plugin and create volume on worker. In node 2:
+
+    ```console
+    $ docker swarm join \
+      --token SWMTKN-1-aabbccdd00112233aabbccdd00112233aabbccdd00112233aa-aabbccdd00112233... \
+      192.168.99.100:2377
+    ```
+
+    ```console
+    $ docker plugin install tiborvass/sample-volume-plugin
+    latest: Pulling from tiborvass/sample-volume-plugin
+    eb9c16fbdc53: Download complete
+    Digest: sha256:00b42de88f3a3e0342e7b35fa62394b0a9ceb54d37f4c50be5d3167899994639
+    Status: Downloaded newer image for tiborvass/sample-volume-plugin:latest
+    Installed plugin tiborvass/sample-volume-plugin
+    ```
+
+    ```console
+    $ docker volume create -d tiborvass/sample-volume-plugin --name pluginVol
+    ```
+
+3. Create a service using the plugin and volume. In node1:
+
+    ```console
+    $ docker service create --name my-service --mount type=volume,volume-driver=tiborvass/sample-volume-plugin,source=pluginVol,destination=/tmp busybox top
+
+    $ docker service ls
+    z1sj8bb8jnfn  my-service   replicated  1/1       busybox:latest
+    ```
+
+    `docker service ls` shows service 1 instance of service running.
+
+4. Observe the task getting scheduled in node 2:
+
+    ```console
+    $ docker ps --format '{{.ID}}\t {{.Status}} {{.Names}} {{.Command}}'
+    83fc1e842599     Up 2 days my-service.1.9jn59qzn7nbc3m0zt1hij12xs "top"
+    ```
+
+### Network plugins
+
+In this example, a global scope network plugin is installed on both the
+swarm manager and worker. A service is created with replicated instances
+using the installed plugin. We will observe how the availability of the
+plugin determines network creation and container scheduling.
+
+Note that node1 is the manager and node2 is the worker.
+
+
+1. Install a global scoped network plugin on both manager and worker. On node1
+   and node2:
+
+    ```console
+    $ docker plugin install bboreham/weave2
+    Plugin "bboreham/weave2" is requesting the following privileges:
+    - network: [host]
+    - capabilities: [CAP_SYS_ADMIN CAP_NET_ADMIN]
+    Do you grant the above permissions? [y/N] y
+    latest: Pulling from bboreham/weave2
+    7718f575adf7: Download complete
+    Digest: sha256:2780330cc15644b60809637ee8bd68b4c85c893d973cb17f2981aabfadfb6d72
+    Status: Downloaded newer image for bboreham/weave2:latest
+    Installed plugin bboreham/weave2
+    ```
+
+2. Create a network using plugin on manager. On node1:
+
+    ```console
+    $ docker network create --driver=bboreham/weave2:latest globalnet
+
+    $ docker network ls
+    NETWORK ID          NAME                DRIVER                   SCOPE
+    qlj7ueteg6ly        globalnet           bboreham/weave2:latest   swarm
+    ```
+
+3. Create a service on the manager and have replicas set to 8. Observe that
+containers get scheduled on both manager and worker.
+
+    On node 1:
+
+    ```console
+    $ docker service create --network globalnet --name myservice --replicas=8 mrjana/simpleweb simpleweb
+w90drnfzw85nygbie9kb89vpa
+    ```
+
+    ```console
+    $ docker ps
+    CONTAINER ID        IMAGE                                                                                      COMMAND             CREATED             STATUS              PORTS               NAMES
+    87520965206a        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         5 seconds ago       Up 4 seconds                            myservice.4.ytdzpktmwor82zjxkh118uf1v
+    15e24de0f7aa        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         5 seconds ago       Up 4 seconds                            myservice.2.kh7a9n3iauq759q9mtxyfs9hp
+    c8c8f0144cdc        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         5 seconds ago       Up 4 seconds                            myservice.6.sjhpj5gr3xt33e3u2jycoj195
+    2e8e4b2c5c08        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         5 seconds ago       Up 4 seconds                            myservice.8.2z29zowsghx66u2velublwmrh
+    ```
+
+    On node 2:
+
+    ```console
+    $ docker ps
+    CONTAINER ID        IMAGE                                                                                      COMMAND             CREATED             STATUS                  PORTS               NAMES
+    53c0ae7c1dae        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         2 seconds ago       Up Less than a second                       myservice.7.x44tvvdm3iwkt9kif35f7ykz1
+    9b56c627fee0        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         2 seconds ago       Up Less than a second                       myservice.1.x7n1rm6lltw5gja3ueikze57q
+    d4f5927ba52c        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         2 seconds ago       Up 1 second                                 myservice.5.i97bfo9uc6oe42lymafs9rz6k
+    478c0d395bd7        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         2 seconds ago       Up Less than a second                       myservice.3.yr7nkffa48lff1vrl2r1m1ucs
+    ```
+
+4. Scale down the number of instances. On node1:
+
+    ```console
+    $ docker service scale myservice=0
+    myservice scaled to 0
+    ```
+
+5. Disable and uninstall the plugin on the worker. On node2:
+
+    ```console
+    $ docker plugin rm -f bboreham/weave2
+    bboreham/weave2
+    ```
+
+6. Scale up the number of instances again. Observe that all containers are
+scheduled on the master and not on the worker, because the plugin is not available on the worker anymore.
+
+    On node 1:
+
+    ```console
+    $ docker service scale myservice=8
+    myservice scaled to 8
+    ```
+
+    ```console
+    $ docker ps
+    CONTAINER ID        IMAGE                                                                                      COMMAND             CREATED             STATUS              PORTS               NAMES
+    cf4b0ec2415e        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         39 seconds ago      Up 36 seconds                           myservice.3.r7p5o208jmlzpcbm2ytl3q6n1
+    57c64a6a2b88        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         39 seconds ago      Up 36 seconds                           myservice.4.dwoezsbb02ccstkhlqjy2xe7h
+    3ac68cc4e7b8        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         39 seconds ago      Up 35 seconds                           myservice.5.zx4ezdrm2nwxzkrwnxthv0284
+    006c3cb318fc        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         39 seconds ago      Up 36 seconds                           myservice.8.q0e3umt19y3h3gzo1ty336k5r
+    dd2ffebde435        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         39 seconds ago      Up 36 seconds                           myservice.7.a77y3u22prjipnrjg7vzpv3ba
+    a86c74d8b84b        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         39 seconds ago      Up 36 seconds                           myservice.6.z9nbn14bagitwol1biveeygl7
+    2846a7850ba0        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         39 seconds ago      Up 37 seconds                           myservice.2.ypufz2eh9fyhppgb89g8wtj76
+    e2ec01efcd8a        mrjana/simpleweb@sha256:317d7f221d68c86d503119b0ea12c29de42af0a22ca087d522646ad1069a47a4   "simpleweb"         39 seconds ago      Up 38 seconds                           myservice.1.8w7c4ttzr6zcb9sjsqyhwp3yl
+    ```
+
+    On node 2:
+
+    ```console
+    $ docker ps
+    CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES
+    ```

docs/extend/plugins_volume.md

@@ -4,4 +4,362 @@ description: "How to manage data with external volume plugins"
 keywords: "Examples, Usage, volume, docker, data, volumes, plugin, api"
 ---
 
-This content has moved to the [github.com/moby/moby](https://github.com/moby/moby/blob/v2.0.0-beta.29/docs/extend/) repository.
+Docker Engine volume plugins enable Engine deployments to be integrated with
+external storage systems such as Amazon EBS, and enable data volumes to persist
+beyond the lifetime of a single Docker host. See the
+[plugin documentation](legacy_plugins.md) for more information.
+
+## Changelog
+
+### 1.13.0
+
+- If used as part of the v2 plugin architecture, mountpoints that are part of
+  paths returned by the plugin must be mounted under the directory specified by
+  `PropagatedMount` in the plugin configuration
+  ([#26398](https://github.com/docker/docker/pull/26398))
+
+### 1.12.0
+
+- Add `Status` field to `VolumeDriver.Get` response
+  ([#21006](https://github.com/docker/docker/pull/21006#))
+- Add `VolumeDriver.Capabilities` to get capabilities of the volume driver
+  ([#22077](https://github.com/docker/docker/pull/22077))
+
+### 1.10.0
+
+- Add `VolumeDriver.Get` which gets the details about the volume
+  ([#16534](https://github.com/docker/docker/pull/16534))
+- Add `VolumeDriver.List` which lists all volumes owned by the driver
+  ([#16534](https://github.com/docker/docker/pull/16534))
+
+### 1.8.0
+
+- Initial support for volume driver plugins
+  ([#14659](https://github.com/docker/docker/pull/14659))
+
+## Command-line changes
+
+To give a container access to a volume, use the `--volume` and `--volume-driver`
+flags on the `docker container run` command. The `--volume` (or `-v`) flag
+accepts a volume name and path on the host, and the `--volume-driver` flag
+accepts a driver type.
+
+```console
+$ docker volume create --driver=myplugin volumename
+
+$ docker container run -it --volume volumename:/data busybox sh
+```
+
+### `--volume`
+
+The `--volume` (or `-v`) flag takes a value that is in the format
+`<volume_name>:<mountpoint>`. The two parts of the value are
+separated by a colon (`:`) character.
+
+- The volume name is a human-readable name for the volume, and cannot begin with
+  a `/` character. It is referred to as `volume_name` in the rest of this topic.
+- The `Mountpoint` is the path on the host (v1) or in the plugin (v2) where the
+  volume has been made available.
+
+### `--volume-driver`
+
+Specifying the `--volume-driver` flag together with a volume name (using
+`--volume`) allows you to use plugins to manage volumes for the container.
+
+The `--volume-driver` flag is used as a default for all volumes created for
+the container, including anonymous volumes. Use the [`--mount`] flag with
+the [`volume-driver`] option to specify the driver to use for each volume
+individually.
+
+[`--mount`]: https://docs.docker.com/reference/cli/docker/container/run/#mount
+[`volume-driver`]: https://docs.docker.com/engine/storage/volumes/#start-a-container-which-creates-a-volume-using-a-volume-driver
+
+## Create a VolumeDriver
+
+The container creation endpoint (`/containers/create`) accepts a `VolumeDriver`
+field of type `string` allowing to specify the name of the driver. If not
+specified, it defaults to `"local"` (the default driver for local volumes).
+
+## Volume plugin protocol
+
+If a plugin registers itself as a `VolumeDriver` when activated, it must
+provide the Docker Daemon with writeable paths on the host filesystem. The Docker
+daemon provides these paths to containers to consume. The Docker daemon makes
+the volumes available by bind-mounting the provided paths into the containers.
+
+> [!NOTE]
+> Volume plugins should *not* write data to the `/var/lib/docker/` directory,
+> including `/var/lib/docker/volumes`. The `/var/lib/docker/` directory is
+> reserved for Docker.
+
+### `/VolumeDriver.Create`
+
+Request:
+
+```json
+{
+    "Name": "volume_name",
+    "Opts": {}
+}
+```
+
+Instruct the plugin that the user wants to create a volume, given a user
+specified volume name. The plugin does not need to actually manifest the
+volume on the filesystem yet (until `Mount` is called).
+`Opts` is a map of driver specific options passed through from the user request.
+
+Response:
+
+```json
+{
+    "Err": ""
+}
+```
+
+  Respond with a string error if an error occurred.
+
+### `/VolumeDriver.Remove`
+
+Request:
+
+```json
+{
+    "Name": "volume_name"
+}
+```
+
+Delete the specified volume from disk. This request is issued when a user
+invokes `docker rm -v` to remove volumes associated with a container.
+
+Response:
+
+```json
+{
+    "Err": ""
+}
+```
+
+Respond with a string error if an error occurred.
+
+### `/VolumeDriver.Mount`
+
+Request:
+
+```json
+{
+    "Name": "volume_name",
+    "ID": "b87d7442095999a92b65b3d9691e697b61713829cc0ffd1bb72e4ccd51aa4d6c"
+}
+```
+
+Docker requires the plugin to provide a volume, given a user specified volume
+name. `Mount` is called once per container start. If the same `volume_name` is requested
+more than once, the plugin may need to keep track of each new mount request and provision
+at the first mount request and deprovision at the last corresponding unmount request.
+
+`ID` is a unique ID for the caller that is requesting the mount.
+
+Response:
+
+- v1
+
+  ```json
+  {
+      "Mountpoint": "/path/to/directory/on/host",
+      "Err": ""
+  }
+  ```
+
+- v2
+
+  ```json
+  {
+      "Mountpoint": "/path/under/PropagatedMount",
+      "Err": ""
+  }
+  ```
+
+`Mountpoint` is the path on the host (v1) or in the plugin (v2) where the volume
+has been made available.
+
+`Err` is either empty or contains an error string.
+
+### `/VolumeDriver.Path`
+
+Request:
+
+```json
+{
+    "Name": "volume_name"
+}
+```
+
+Request the path to the volume with the given `volume_name`.
+
+Response:
+
+- v1
+
+  ```json
+  {
+      "Mountpoint": "/path/to/directory/on/host",
+      "Err": ""
+  }
+  ```
+
+- v2
+
+  ```json
+  {
+      "Mountpoint": "/path/under/PropagatedMount",
+      "Err": ""
+  }
+  ```
+
+Respond with the path on the host (v1) or inside the plugin (v2) where the
+volume has been made available, and/or a string error if an error occurred.
+
+`Mountpoint` is optional. However, the plugin may be queried again later if one
+is not provided.
+
+### `/VolumeDriver.Unmount`
+
+Request:
+
+```json
+{
+    "Name": "volume_name",
+    "ID": "b87d7442095999a92b65b3d9691e697b61713829cc0ffd1bb72e4ccd51aa4d6c"
+}
+```
+
+Docker is no longer using the named volume. `Unmount` is called once per
+container stop. Plugin may deduce that it is safe to deprovision the volume at
+this point.
+
+`ID` is a unique ID for the caller that is requesting the mount.
+
+Response:
+
+```json
+{
+    "Err": ""
+}
+```
+
+Respond with a string error if an error occurred.
+
+### `/VolumeDriver.Get`
+
+Request:
+
+```json
+{
+    "Name": "volume_name"
+}
+```
+
+Get info about `volume_name`.
+
+Response:
+
+- v1
+
+  ```json
+  {
+    "Volume": {
+      "Name": "volume_name",
+      "Mountpoint": "/path/to/directory/on/host",
+      "Status": {}
+    },
+    "Err": ""
+  }
+  ```
+
+- v2
+
+  ```json
+  {
+    "Volume": {
+      "Name": "volume_name",
+      "Mountpoint": "/path/under/PropagatedMount",
+      "Status": {}
+    },
+    "Err": ""
+  }
+  ```
+
+Respond with a string error if an error occurred. `Mountpoint` and `Status` are
+optional.
+
+
+### /VolumeDriver.List
+
+Request:
+
+```json
+{}
+```
+
+Get the list of volumes registered with the plugin.
+
+Response:
+
+- v1
+
+  ```json
+  {
+    "Volumes": [
+      {
+        "Name": "volume_name",
+        "Mountpoint": "/path/to/directory/on/host"
+      }
+    ],
+    "Err": ""
+  }
+  ```
+
+- v2
+
+  ```json
+  {
+    "Volumes": [
+      {
+        "Name": "volume_name",
+        "Mountpoint": "/path/under/PropagatedMount"
+      }
+    ],
+    "Err": ""
+  }
+  ```
+
+Respond with a string error if an error occurred. `Mountpoint` is optional.
+
+### /VolumeDriver.Capabilities
+
+Request:
+
+```json
+{}
+```
+
+Get the list of capabilities the driver supports.
+
+The driver is not required to implement `Capabilities`. If it is not
+implemented, the default values are used.
+
+Response:
+
+```json
+{
+  "Capabilities": {
+    "Scope": "global"
+  }
+}
+```
+
+Supported scopes are `global` and `local`. Any other value in `Scope` will be
+ignored, and `local` is used. `Scope` allows cluster managers to handle the
+volume in different ways. For instance, a scope of `global`, signals to the
+cluster manager that it only needs to create the volume once instead of on each
+Docker host. More capabilities may be added in the future.

docs/reference/commandline/container_commit.md

@@ -44,8 +44,8 @@ created. Supported `Dockerfile` instructions:
 $ docker ps
 
 CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS              NAMES
-c3f279d17e0a        ubuntu:26.04        /bin/bash           7 days ago          Up 25 hours                            desperate_dubinsky
-197387f1b436        ubuntu:26.04        /bin/bash           7 days ago          Up 25 hours                            focused_hamilton
+c3f279d17e0a        ubuntu:24.04        /bin/bash           7 days ago          Up 25 hours                            desperate_dubinsky
+197387f1b436        ubuntu:24.04        /bin/bash           7 days ago          Up 25 hours                            focused_hamilton
 
 $ docker commit c3f279d17e0a  svendowideit/testimage:version3
 
@@ -63,8 +63,8 @@ svendowideit/testimage            version3            f5283438590d        16 sec
 $ docker ps
 
 CONTAINER ID       IMAGE               COMMAND             CREATED             STATUS              PORTS              NAMES
-c3f279d17e0a       ubuntu:26.04        /bin/bash           7 days ago          Up 25 hours                            desperate_dubinsky
-197387f1b436       ubuntu:26.04        /bin/bash           7 days ago          Up 25 hours                            focused_hamilton
+c3f279d17e0a       ubuntu:24.04        /bin/bash           7 days ago          Up 25 hours                            desperate_dubinsky
+197387f1b436       ubuntu:24.04        /bin/bash           7 days ago          Up 25 hours                            focused_hamilton
 
 $ docker inspect -f "{{ .Config.Env }}" c3f279d17e0a
 
@@ -85,8 +85,8 @@ $ docker inspect -f "{{ .Config.Env }}" f5283438590d
 $ docker ps
 
 CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS              NAMES
-c3f279d17e0a        ubuntu:26.04        /bin/bash           7 days ago          Up 25 hours                            desperate_dubinsky
-197387f1b436        ubuntu:26.04        /bin/bash           7 days ago          Up 25 hours                            focused_hamilton
+c3f279d17e0a        ubuntu:24.04        /bin/bash           7 days ago          Up 25 hours                            desperate_dubinsky
+197387f1b436        ubuntu:24.04        /bin/bash           7 days ago          Up 25 hours                            focused_hamilton
 
 $ docker commit --change='CMD ["apachectl", "-DFOREGROUND"]' -c "EXPOSE 80" c3f279d17e0a  svendowideit/testimage:version4
 
@@ -100,6 +100,6 @@ $ docker ps
 
 CONTAINER ID        IMAGE               COMMAND                 CREATED             STATUS              PORTS              NAMES
 89373736e2e7        testimage:version4  "apachectl -DFOREGROU"  3 seconds ago       Up 2 seconds        80/tcp             distracted_fermat
-c3f279d17e0a        ubuntu:26.04        /bin/bash               7 days ago          Up 25 hours                            desperate_dubinsky
-197387f1b436        ubuntu:26.04        /bin/bash               7 days ago          Up 25 hours                            focused_hamilton
+c3f279d17e0a        ubuntu:24.04        /bin/bash               7 days ago          Up 25 hours                            desperate_dubinsky
+197387f1b436        ubuntu:24.04        /bin/bash               7 days ago          Up 25 hours                            focused_hamilton
 ```

docs/reference/commandline/container_ls.md

@@ -33,7 +33,7 @@ Running `docker ps --no-trunc` showing 2 linked containers.
 $ docker ps --no-trunc
 
 CONTAINER ID                                                     IMAGE                        COMMAND                CREATED              STATUS              PORTS               NAMES
-ca5534a51dd04bbcebe9b23ba05f389466cf0c190f1f8f182d7eea92a9671d00 ubuntu:26.04                 bash                   17 seconds ago       Up 16 seconds       3300-3310/tcp       webapp
+ca5534a51dd04bbcebe9b23ba05f389466cf0c190f1f8f182d7eea92a9671d00 ubuntu:24.04                 bash                   17 seconds ago       Up 16 seconds       3300-3310/tcp       webapp
 9ca9747b233100676a48cc7806131586213fa5dab86dd1972d6a8732e3a84a4d crosbymichael/redis:latest   /redis-server --dir    33 minutes ago       Up 33 minutes       6379/tcp            redis,webapp/db
 ```
 
@@ -240,13 +240,13 @@ CONTAINER ID        IMAGE               COMMAND             CREATED
 919e1179bdb8        ubuntu-c1           "top"               About a minute ago   Up About a minute                       admiring_lovelace
 ```
 
-Match containers based on the `ubuntu` version `26.04` image:
+Match containers based on the `ubuntu` version `24.04` image:
 
 ```console
-$ docker ps --filter ancestor=ubuntu:26.04
+$ docker ps --filter ancestor=ubuntu:24.04
 
 CONTAINER ID        IMAGE               COMMAND             CREATED              STATUS              PORTS               NAMES
-82a598284012        ubuntu:26.04        "top"               3 minutes ago        Up 3 minutes                            sleepy_bose
+82a598284012        ubuntu:24.04        "top"               3 minutes ago        Up 3 minutes                            sleepy_bose
 ```
 
 The following matches containers based on the layer `d0e008c6cf02` or an image
@@ -256,7 +256,7 @@ that have this layer in its layer stack.
 $ docker ps --filter ancestor=d0e008c6cf02
 
 CONTAINER ID        IMAGE               COMMAND             CREATED              STATUS              PORTS               NAMES
-82a598284012        ubuntu:26.04        "top"               3 minutes ago        Up 3 minutes                            sleepy_bose
+82a598284012        ubuntu:24.04        "top"               3 minutes ago        Up 3 minutes                            sleepy_bose
 ```
 
 #### Create time

docs/reference/commandline/image_pull.md

@@ -66,18 +66,18 @@ docker.io/library/debian:latest
 Docker images can consist of multiple layers. In the example above, the image
 consists of a single layer; `e756f3fdd6a3`.
 
-Layers can be reused by images. For example, the `debian:trixie` image shares
-its layer with the `debian:latest`. Pulling the `debian:trixie` image therefore
+Layers can be reused by images. For example, the `debian:bookworm` image shares
+its layer with the `debian:latest`. Pulling the `debian:bookworm` image therefore
 only pulls its metadata, but not its layers, because the layer is already present
 locally:
 
 ```console
-$ docker image pull debian:trixie
+$ docker image pull debian:bookworm
 
-trixie: Pulling from library/debian
+bookworm: Pulling from library/debian
 Digest: sha256:3f1d6c17773a45c97bd8f158d665c9709d7b29ed7917ac934086ad96f92e4510
-Status: Downloaded newer image for debian:trixie
-docker.io/library/debian:trixie
+Status: Downloaded newer image for debian:bookworm
+docker.io/library/debian:bookworm
 ```
 
 To see which images are present locally, use the [`docker images`](image_ls.md)
@@ -87,13 +87,13 @@ command:
 $ docker images
 
 REPOSITORY   TAG        IMAGE ID       CREATED        SIZE
-debian       trixie     4eacea30377a   8 days ago     124MB
+debian       bookworm   4eacea30377a   8 days ago     124MB
 debian       latest     4eacea30377a   8 days ago     124MB
 ```
 
 Docker uses a content-addressable image store, and the image ID is a SHA256
 digest covering the image's configuration and layers. In the example above,
-`debian:trixie` and `debian:latest` have the same image ID because they are
+`debian:bookworm` and `debian:latest` have the same image ID because they are
 the same image tagged with different names. Because they are the same image,
 their layers are stored only once and do not consume extra disk space.
 
@@ -106,8 +106,8 @@ refer to [understand images, containers, and storage drivers](https://docs.docke
 So far, you've pulled images by their name (and "tag"). Using names and tags is
 a convenient way to work with images. When using tags, you can `docker pull` an
 image again to make sure you have the most up-to-date version of that image.
-For example, `docker pull ubuntu:26.04` pulls the latest version of the Ubuntu
-26.04 image.
+For example, `docker pull ubuntu:24.04` pulls the latest version of the Ubuntu
+24.04 image.
 
 In some cases you don't want images to be updated to newer versions, but prefer
 to use a fixed version of an image. Docker enables you to pull an image by its
@@ -116,16 +116,16 @@ of an image to pull. Doing so, allows you to "pin" an image to that version,
 and guarantee that the image you're using is always the same.
 
 To know the digest of an image, pull the image first. Let's pull the latest
-`ubuntu:26.04` image from Docker Hub:
+`ubuntu:24.04` image from Docker Hub:
 
 ```console
-$ docker pull ubuntu:26.04
+$ docker pull ubuntu:24.04
 
-26.04: Pulling from library/ubuntu
+24.04: Pulling from library/ubuntu
 125a6e411906: Pull complete
 Digest: sha256:2e863c44b718727c860746568e1d54afd13b2fa71b160f5cd9058fc436217b30
-Status: Downloaded newer image for ubuntu:26.04
-docker.io/library/ubuntu:26.04
+Status: Downloaded newer image for ubuntu:24.04
+docker.io/library/ubuntu:24.04
 ```
 
 Docker prints the digest of the image after the pull has finished. In the example
@@ -213,11 +213,11 @@ shorthand) to see the images that were pulled. The example below shows all the
 ```console
 $ docker image ls --filter reference=ubuntu
 REPOSITORY   TAG       IMAGE ID       CREATED        SIZE
-ubuntu       24.04     8a3cdc4d1ad3   3 weeks ago    77.9MB
-ubuntu       noble     8a3cdc4d1ad3   3 weeks ago    77.9MB
-ubuntu       26.04     35a88802559d   6 weeks ago    78.1MB
+ubuntu       22.04     8a3cdc4d1ad3   3 weeks ago    77.9MB
+ubuntu       jammy     8a3cdc4d1ad3   3 weeks ago    77.9MB
+ubuntu       24.04     35a88802559d   6 weeks ago    78.1MB
 ubuntu       latest    35a88802559d   6 weeks ago    78.1MB
-ubuntu       resolute  35a88802559d   6 weeks ago    78.1MB
+ubuntu       noble     35a88802559d   6 weeks ago    78.1MB
 ```
 
 ### Cancel a pull

docs/reference/commandline/login.md

@@ -180,12 +180,13 @@ code, and authenticate.
 ```console
 $ docker login
 
-Using web-based login. To sign in with credentials on the command line, use 'docker login -u <username>'
+USING WEB-BASED LOGIN
+To sign in with credentials on the command line, use 'docker login -u <username>'
 
 Your one-time device confirmation code is: LNFR-PGCJ
-Open this URL to authenticate: https://login.docker.com/activate?user_code=LNFR-PGCJ
+Press ENTER to open your browser or submit your device code here: https://login.docker.com/activate
 
-Press ENTER to open the URL in your browser, or Ctrl+C to cancel.
+Waiting for authentication in the browser…
 ```
 
 After entering the code in your browser, you are authenticated to Docker Hub

docs/reference/commandline/service_create.md

@@ -706,7 +706,7 @@ follows:
 | `node.platform.os`   | Node operating system          | `node.platform.os==windows`                   |
 | `node.platform.arch` | Node architecture              | `node.platform.arch==x86_64`                  |
 | `node.labels`        | User-defined node labels       | `node.labels.security==high`                  |
-| `engine.labels`      | Docker Engine's labels         | `engine.labels.operatingsystem==ubuntu-26.04` |
+| `engine.labels`      | Docker Engine's labels         | `engine.labels.operatingsystem==ubuntu-24.04` |
 
 `engine.labels` apply to Docker Engine labels like operating system, drivers,
 etc. Swarm administrators add `node.labels` for operational purposes by using

docs/reference/commandline/system_events.md

@@ -339,8 +339,8 @@ $ docker events --filter 'type=network'
 
 $ docker events --filter 'container=container_1' --filter 'container=container_2'
 
-2014-09-03T15:49:29.999999999Z07:00 container die 4386fb97867d (image=ubuntu:26.04)
-2014-05-10T17:42:14.999999999Z07:00 container stop 4386fb97867d (image=ubuntu:26.04)
+2014-09-03T15:49:29.999999999Z07:00 container die 4386fb97867d (image=ubuntu:24.04)
+2014-05-10T17:42:14.999999999Z07:00 container stop 4386fb97867d (image=ubuntu:24.04)
 2014-05-10T17:42:14.999999999Z07:00 container die 7805c1d35632 (imager=redis:7.2)
 2014-09-03T15:49:29.999999999Z07:00 container stop 7805c1d35632 (image=redis:7.2)
 

docs/reference/run.md

@@ -35,7 +35,7 @@ reference to create or run a container based on an image.
 
 An image tag is the image version, which defaults to `latest` when omitted. Use
 the tag to run a container from specific version of an image. For example, to
-run version `26.04` of the `ubuntu` image: `docker run ubuntu:26.04`.
+run version `24.04` of the `ubuntu` image: `docker run ubuntu:24.04`.
 
 #### Image digests
 
@@ -406,14 +406,14 @@ We have four ways to set user memory usage:
 Examples:
 
 ```console
-$ docker run -it ubuntu:26.04 /bin/bash
+$ docker run -it ubuntu:24.04 /bin/bash
 ```
 
 We set nothing about memory, this means the processes in the container can use
 as much memory and swap memory as they need.
 
 ```console
-$ docker run -it -m 300M --memory-swap -1 ubuntu:26.04 /bin/bash
+$ docker run -it -m 300M --memory-swap -1 ubuntu:24.04 /bin/bash
 ```
 
 We set memory limit and disabled swap memory limit, this means the processes in
@@ -421,7 +421,7 @@ the container can use 300M memory and as much swap memory as they need (if the
 host supports swap memory).
 
 ```console
-$ docker run -it -m 300M ubuntu:26.04 /bin/bash
+$ docker run -it -m 300M ubuntu:24.04 /bin/bash
 ```
 
 We set memory limit only, this means the processes in the container can use
@@ -430,7 +430,7 @@ We set memory limit only, this means the processes in the container can use
 would be 2*300M, so processes can use 300M swap memory as well.
 
 ```console
-$ docker run -it -m 300M --memory-swap 1G ubuntu:26.04 /bin/bash
+$ docker run -it -m 300M --memory-swap 1G ubuntu:24.04 /bin/bash
 ```
 
 We set both memory and swap memory, so the processes in the container can use
@@ -456,7 +456,7 @@ The following example limits the memory (`-m`) to 500M and sets the memory
 reservation to 200M.
 
 ```console
-$ docker run -it -m 500M --memory-reservation 200M ubuntu:26.04 /bin/bash
+$ docker run -it -m 500M --memory-reservation 200M ubuntu:24.04 /bin/bash
 ```
 
 Under this configuration, when the container consumes memory more than 200M and
@@ -466,7 +466,7 @@ memory below 200M.
 The following example set memory reservation to 1G without a hard memory limit.
 
 ```console
-$ docker run -it --memory-reservation 1G ubuntu:26.04 /bin/bash
+$ docker run -it --memory-reservation 1G ubuntu:24.04 /bin/bash
 ```
 
 The container can use as much memory as it needs. The memory reservation setting
@@ -484,13 +484,13 @@ The following example limits the memory to 100M and disables the OOM killer for
 this container:
 
 ```console
-$ docker run -it -m 100M --oom-kill-disable ubuntu:26.04 /bin/bash
+$ docker run -it -m 100M --oom-kill-disable ubuntu:24.04 /bin/bash
 ```
 
 The following example, illustrates a dangerous way to use the flag:
 
 ```console
-$ docker run -it --oom-kill-disable ubuntu:26.04 /bin/bash
+$ docker run -it --oom-kill-disable ubuntu:24.04 /bin/bash
 ```
 
 The container has unlimited memory which can cause the host to run out memory
@@ -510,7 +510,7 @@ between 0 and 100. A value of 0 turns off anonymous page swapping. A value of
 For example, you can set:
 
 ```console
-$ docker run -it --memory-swappiness=0 ubuntu:26.04 /bin/bash
+$ docker run -it --memory-swappiness=0 ubuntu:24.04 /bin/bash
 ```
 
 Setting the `--memory-swappiness` option is helpful when you want to retain the
@@ -561,7 +561,7 @@ And usually `--cpu-period` should work with `--cpu-quota`.
 Examples:
 
 ```console
-$ docker run -it --cpu-period=50000 --cpu-quota=25000 ubuntu:26.04 /bin/bash
+$ docker run -it --cpu-period=50000 --cpu-quota=25000 ubuntu:24.04 /bin/bash
 ```
 
 If there is 1 CPU, this means the container can get 50% CPU worth of run-time every 50ms.
@@ -582,13 +582,13 @@ We can set cpus in which to allow execution for containers.
 Examples:
 
 ```console
-$ docker run -it --cpuset-cpus="1,3" ubuntu:26.04 /bin/bash
+$ docker run -it --cpuset-cpus="1,3" ubuntu:24.04 /bin/bash
 ```
 
 This means processes in container can be executed on cpu 1 and cpu 3.
 
 ```console
-$ docker run -it --cpuset-cpus="0-2" ubuntu:26.04 /bin/bash
+$ docker run -it --cpuset-cpus="0-2" ubuntu:24.04 /bin/bash
 ```
 
 This means processes in container can be executed on cpu 0, cpu 1 and cpu 2.
@@ -599,14 +599,14 @@ on NUMA systems.
 Examples:
 
 ```console
-$ docker run -it --cpuset-mems="1,3" ubuntu:26.04 /bin/bash
+$ docker run -it --cpuset-mems="1,3" ubuntu:24.04 /bin/bash
 ```
 
 This example restricts the processes in the container to only use memory from
 memory nodes 1 and 3.
 
 ```console
-$ docker run -it --cpuset-mems="0-2" ubuntu:26.04 /bin/bash
+$ docker run -it --cpuset-mems="0-2" ubuntu:24.04 /bin/bash
 ```
 
 This example restricts the processes in the container to only use memory from
@@ -637,8 +637,8 @@ For example, the commands below create two containers with different blkio
 weight:
 
 ```console
-$ docker run -it --name c1 --blkio-weight 300 ubuntu:26.04 /bin/bash
-$ docker run -it --name c2 --blkio-weight 600 ubuntu:26.04 /bin/bash
+$ docker run -it --name c1 --blkio-weight 300 ubuntu:24.04 /bin/bash
+$ docker run -it --name c2 --blkio-weight 600 ubuntu:24.04 /bin/bash
 ```
 
 If you do block IO in the two containers at the same time, by, for example:
@@ -854,11 +854,11 @@ For interacting with the network stack, instead of using `--privileged` they
 should use `--cap-add=NET_ADMIN` to modify the network interfaces.
 
 ```console
-$ docker run -it --rm  ubuntu:26.04 ip link add dummy0 type dummy
+$ docker run -it --rm  ubuntu:24.04 ip link add dummy0 type dummy
 
 RTNETLINK answers: Operation not permitted
 
-$ docker run -it --rm --cap-add=NET_ADMIN ubuntu:26.04 ip link add dummy0 type dummy
+$ docker run -it --rm --cap-add=NET_ADMIN ubuntu:24.04 ip link add dummy0 type dummy
 ```
 
 To mount a FUSE based filesystem, you need to combine both `--cap-add` and

e2e/cli-plugins/run_test.go

@@ -62,22 +62,6 @@ func TestNonexistingHelp(t *testing.T) {
 	})
 }
 
-// TestNonexistingVersion ensures correct behaviour when invoking a
-// nonexistent plugin with `--version`.
-func TestNonexistingVersion(t *testing.T) {
-	run, _, cleanup := prepare(t)
-	defer cleanup()
-
-	for _, flag := range []string{"--version", "-v"} {
-		res := icmd.RunCmd(run("nonexistent", flag))
-		res.Assert(t, icmd.Expected{
-			ExitCode: 1,
-			Out:      icmd.None,
-		})
-		golden.Assert(t, res.Stderr(), "docker-nonexistent-err.golden")
-	}
-}
-
 // TestRunBad ensures correct behaviour when running an existent but invalid plugin
 func TestRunBad(t *testing.T) {
 	run, _, cleanup := prepare(t)

e2e/registry/login_test.go

@@ -30,5 +30,5 @@ func TestOauthLogin(t *testing.T) {
 	assert.NilError(t, err)
 
 	output, _ := io.ReadAll(p)
-	assert.Check(t, strings.Contains(string(output), "Using web-based login"), string(output))
+	assert.Check(t, strings.Contains(string(output), "USING WEB-BASED LOGIN"), string(output))
 }

internal/oauth/manager/manager.go

@@ -7,7 +7,6 @@ import (
 	"fmt"
 	"io"
 	"os"
-	"os/exec"
 	"strings"
 
 	"github.com/docker/cli/cli/config/credentials"
@@ -18,6 +17,8 @@ import (
 	"github.com/docker/cli/internal/registry"
 	"github.com/docker/cli/internal/tui"
 	"github.com/morikuni/aec"
+	"github.com/sirupsen/logrus"
+
 	"github.com/pkg/browser"
 )
 
@@ -82,18 +83,19 @@ var ErrDeviceLoginStartFail = errors.New("failed to start device code flow login
 // The retrieved tokens are stored in the credentials store (under a separate
 // key), and the refresh token is concatenated with the client ID.
 func (m *OAuthManager) LoginDevice(ctx context.Context, w io.Writer) (*types.AuthConfig, error) {
-	ctx, cancel := context.WithCancel(ctx)
-	defer cancel()
-
 	state, err := m.api.GetDeviceCode(ctx, m.audience)
 	if err != nil {
-		return nil, fmt.Errorf("%w: %w", ErrDeviceLoginStartFail, err)
+		logrus.Debugf("failed to start device code login: %v", err)
+		return nil, ErrDeviceLoginStartFail
 	}
 
 	if state.UserCode == "" {
-		return nil, fmt.Errorf("%w: missing user code", ErrDeviceLoginStartFail)
+		logrus.Debugf("failed to start device code login: missing user code")
+		return nil, ErrDeviceLoginStartFail
 	}
 
+	_, _ = fmt.Fprintln(w, aec.Bold.Apply("\nUSING WEB-BASED LOGIN"))
+
 	var out tui.Output
 	switch stream := w.(type) {
 	case *streams.Out:
@@ -101,10 +103,9 @@ func (m *OAuthManager) LoginDevice(ctx context.Context, w io.Writer) (*types.Aut
 	default:
 		out = tui.NewOutput(streams.NewOut(w))
 	}
-	out.PrintNote("Using web-based login. To sign in with credentials on the command line, use 'docker login -u <username>'\n")
-	_, _ = fmt.Fprintln(w, "Your one-time device confirmation code is:", aec.Bold.Apply(state.UserCode))
-	_, _ = fmt.Fprintln(w, "Open this URL to authenticate:", aec.Underline.Apply(state.VerificationURI))
-	_, _ = fmt.Fprintln(w, "\n"+aec.Bold.Apply("Press ENTER")+" to open the URL in your browser, or "+aec.Bold.Apply("Ctrl+C")+" to cancel.")
+	out.PrintNote("To sign in with credentials on the command line, use 'docker login -u <username>'\n")
+	_, _ = fmt.Fprintf(w, "\nYour one-time device confirmation code is: "+aec.Bold.Apply("%s\n"), state.UserCode)
+	_, _ = fmt.Fprintf(w, aec.Bold.Apply("Press ENTER")+" to open your browser or submit your device code here: "+aec.Underline.Apply("%s\n"), strings.Split(state.VerificationURI, "?")[0])
 
 	tokenResChan := make(chan api.TokenResponse)
 	waitForTokenErrChan := make(chan error)
@@ -119,25 +120,11 @@ func (m *OAuthManager) LoginDevice(ctx context.Context, w io.Writer) (*types.Aut
 
 	go func() {
 		reader := bufio.NewReader(os.Stdin)
-		if _, err := reader.ReadString('\n'); err != nil || ctx.Err() != nil {
-			return
-		}
-		err := m.openBrowser(state.VerificationURI)
-		if ctx.Err() != nil {
-			return
-		}
-		if err != nil {
-			if errors.Is(err, exec.ErrNotFound) {
-				_, _ = fmt.Fprintln(w, "No browser found. Open the URL above manually to continue.")
-			} else {
-				_, _ = fmt.Fprintln(w, "Failed to open browser:", err)
-				_, _ = fmt.Fprintln(w, "Open the URL above manually to continue.")
-			}
-			return
-		}
-		_, _ = fmt.Fprintln(w, "\nOpening browser…")
+		_, _ = reader.ReadString('\n')
+		_ = m.openBrowser(state.VerificationURI)
 	}()
 
+	_, _ = fmt.Fprint(w, "\nWaiting for authentication in the browser…\n")
 	var tokenRes api.TokenResponse
 	select {
 	case <-ctx.Done():

internal/registryclient/endpoint.go

@@ -69,10 +69,10 @@ func getHTTPTransport(authConfig registrytypes.AuthConfig, endpoint registry.API
 	// get the http transport, this will be used in a client to upload manifest
 	base := &http.Transport{
 		Proxy: http.ProxyFromEnvironment,
-		DialContext: (&net.Dialer{
+		Dial: (&net.Dialer{
 			Timeout:   30 * time.Second,
 			KeepAlive: 30 * time.Second,
-		}).DialContext,
+		}).Dial,
 		TLSHandshakeTimeout: 10 * time.Second,
 		TLSClientConfig:     endpoint.TLSConfig,
 		DisableKeepAlives:   true,

internal/test/cmd.go

@@ -27,13 +27,8 @@ func TerminatePrompt(ctx context.Context, t *testing.T, cmd *cobra.Command, cli
 	}))
 	cli.SetOut(outStream)
 
-	r, w, err := os.Pipe()
+	r, _, err := os.Pipe()
 	assert.NilError(t, err)
-	t.Cleanup(func() {
-		_ = w.Close()
-		_ = r.Close()
-	})
-
 	cli.SetIn(streams.NewIn(r))
 
 	notifyCtx, notifyCancel := context.WithCancel(ctx)
@@ -63,6 +58,8 @@ func TerminatePrompt(ctx context.Context, t *testing.T, cmd *cobra.Command, cli
 		}()
 	}
 
+	assert.Check(t, cli.OutBuffer().Len() > 0)
+
 	// a small delay to ensure the plugin is prompting
 	time.Sleep(100 * time.Microsecond)
 

man/docker-build.1.md

@@ -83,24 +83,16 @@ set as the **URL**, the repository is cloned locally and then sent as the contex
    Add a line to /etc/hosts. The format is hostname=ip, or hostname:ip.
    The **--add-host** option can be set multiple times.
 
-**--build-arg** *name*[=*value*]
-   Set a build-time variable. The *name* is the variable name, as declared
-   by an `ARG` instruction in the Dockerfile. If *value* is omitted, the
-   value of the variable *name* from the local environment is used; if it is
-   not set there either, the default from the `ARG` instruction (if any) is
-   used.
-
-   Build-time variables are available as environment variables to commands
-   run by the Dockerfile's `RUN` instructions, and can be used for variable
-   expansion in other Dockerfile instructions. An environment variable defined
-   by an `ENV` instruction always overrides an `ARG` of the same name. This
-   mechanism is not meant for passing secret values.
+**--build-arg** *variable*
+   name and value of a **buildarg**.
 
    For example, if you want to pass a value for `http_proxy`, use
    `--build-arg=http_proxy="http://some.proxy.url"`
 
-   See also https://docs.docker.com/reference/dockerfile/#arg and
-   https://docs.docker.com/reference/cli/docker/buildx/build/#build-arg.
+   Users pass these values at build-time. Docker uses the `buildargs` as the
+   environment context for command(s) run via the Dockerfile's `RUN` instruction
+   or for variable expansion in other Dockerfile instructions. This is not meant
+   for passing secret values. [Read more about the buildargs instruction](https://docs.docker.com/engine/reference/builder/#arg)
 
 **--cache-from** ""
    Set image that will be used as a build cache source.

man/src/container/ls.md

@@ -48,10 +48,10 @@ Valid placeholders for the Go template are listed below:
 
     $ docker container ls -a
     CONTAINER ID        IMAGE                 COMMAND                CREATED             STATUS      PORTS    NAMES
-    a87ecb4f327c        ubuntu:26.04          /bin/sh -c #(nop) MA   20 minutes ago      Exit 0               desperate_brattain
+    a87ecb4f327c        ubuntu:24.04          /bin/sh -c #(nop) MA   20 minutes ago      Exit 0               desperate_brattain
     01946d9d34d8        busybox               /bin/sh -c #(nop) MA   33 minutes ago      Exit 0               thirsty_bell
     c1d3b0166030        acffc0358b9e          /bin/sh -c yum -y up   2 weeks ago         Exit 1               determined_torvalds
-    41d50ecd2f57        ubuntu:26.04          /bin/sh -c #(nop) MA   2 weeks ago         Exit 0               drunk_pike
+    41d50ecd2f57        ubuntu:24.04          /bin/sh -c #(nop) MA   2 weeks ago         Exit 0               drunk_pike
 
 ## Display only IDs of all containers, including non-running
 

man/src/image/ls.md

@@ -10,7 +10,7 @@ The title REPOSITORY for the first title may seem confusing. It is essentially
 the image name. However, because you can tag a specific image, and multiple tags
 (image instances) can be associated with a single name, the name is really a
 repository for all tagged images of the same name. For example consider an image
-called ubuntu. It may be tagged with 26.04 or 24.04, etc. to manage different
+called ubuntu. It may be tagged with 24.04 or 22.04, etc. to manage different
 versions.
 
 ## Filters

man/src/image/pull.md

@@ -27,17 +27,17 @@ Docker Engine uses the `:latest` tag as a default. This example pulls the
 Docker images can consist of multiple layers. In the example above, the image
 consists of a single layer; `e756f3fdd6a3`.
 
-Layers can be reused by images. For example, the `debian:trixie` image shares
-its layer with the `debian:latest`. Pulling the `debian:trixie` image therefore
+Layers can be reused by images. For example, the `debian:bookworm` image shares
+its layer with the `debian:latest`. Pulling the `debian:bookworm` image therefore
 only pulls its metadata, but not its layers, because the layer is already present
 locally:
 
-    $ docker image pull debian:trixie
+    $ docker image pull debian:bookworm
 
-    trixie: Pulling from library/debian
+    bookworm: Pulling from library/debian
     Digest: sha256:3f1d6c17773a45c97bd8f158d665c9709d7b29ed7917ac934086ad96f92e4510
-    Status: Downloaded newer image for debian:trixie
-    docker.io/library/debian:trixie
+    Status: Downloaded newer image for debian:bookworm
+    docker.io/library/debian:bookworm
 
 To see which images are present locally, use the **docker-images(1)**
 command:
@@ -45,12 +45,12 @@ command:
     $ docker images
 
     REPOSITORY   TAG        IMAGE ID       CREATED        SIZE
-    debian       trixie     4eacea30377a   8 days ago     124MB
+    debian       bookworm   4eacea30377a   8 days ago     124MB
     debian       latest     4eacea30377a   8 days ago     124MB
 
 Docker uses a content-addressable image store, and the image ID is a SHA256
 digest covering the image's configuration and layers. In the example above,
-`debian:trixie` and `debian:latest` have the same image ID because they are
+`debian:bookworm` and `debian:latest` have the same image ID because they are
 the *same* image tagged with different names. Because they are the same image,
 their layers are stored only once and do not consume extra disk space.
 
@@ -64,8 +64,8 @@ in the online documentation.
 So far, you've pulled images by their name (and "tag"). Using names and tags is
 a convenient way to work with images. When using tags, you can `docker image pull` an
 image again to make sure you have the most up-to-date version of that image.
-For example, `docker image pull ubuntu:26.04` pulls the latest version of the Ubuntu
-26.04 image.
+For example, `docker image pull ubuntu:24.04` pulls the latest version of the Ubuntu
+24.04 image.
 
 In some cases you don't want images to be updated to newer versions, but prefer
 to use a fixed version of an image. Docker enables you to pull an image by its
@@ -74,15 +74,15 @@ of an image to pull. Doing so, allows you to "pin" an image to that version,
 and guarantee that the image you're using is always the same.
 
 To know the digest of an image, pull the image first. Let's pull the latest
-`ubuntu:26.04` image from Docker Hub:
+`ubuntu:24.04` image from Docker Hub:
 
-    $ docker image pull ubuntu:26.04
+    $ docker image pull ubuntu:24.04
 
-    26.04: Pulling from library/ubuntu
+    24.04: Pulling from library/ubuntu
     125a6e411906: Pull complete
     Digest: sha256:2e863c44b718727c860746568e1d54afd13b2fa71b160f5cd9058fc436217b30
-    Status: Downloaded newer image for ubuntu:26.04
-    docker.io/library/ubuntu:26.04
+    Status: Downloaded newer image for ubuntu:24.04
+    docker.io/library/ubuntu:24.04
 
 Docker prints the digest of the image after the pull has finished. In the example
 above, the digest of the image is:
@@ -159,11 +159,11 @@ images that are present locally:
 
     $ docker image ls --filter reference=ubuntu
     REPOSITORY   TAG       IMAGE ID       CREATED        SIZE
-    ubuntu       24.04     8a3cdc4d1ad3   3 weeks ago    77.9MB
-    ubuntu       noble     8a3cdc4d1ad3   3 weeks ago    77.9MB
-    ubuntu       26.04     35a88802559d   6 weeks ago    78.1MB
+    ubuntu       22.04     8a3cdc4d1ad3   3 weeks ago    77.9MB
+    ubuntu       jammy     8a3cdc4d1ad3   3 weeks ago    77.9MB
+    ubuntu       24.04     35a88802559d   6 weeks ago    78.1MB
     ubuntu       latest    35a88802559d   6 weeks ago    78.1MB
-    ubuntu       resolute  35a88802559d   6 weeks ago    78.1MB
+    ubuntu       noble     35a88802559d   6 weeks ago    78.1MB
 
 ## Cancel a pull
 

man/src/system/events.md

@@ -62,8 +62,8 @@ The following example outputs all events that were generated in the last 3 minut
 relative to the current time on the client machine:
 
     # docker events --since '3m'
-    2015-05-12T11:51:30.999999999Z07:00  4386fb97867d: (from ubuntu:26.04) die
-    2015-05-12T15:52:12.999999999Z07:00  4386fb97867d: (from ubuntu:26.04) stop
+    2015-05-12T11:51:30.999999999Z07:00  4386fb97867d: (from ubuntu:24.04) die
+    2015-05-12T15:52:12.999999999Z07:00  4386fb97867d: (from ubuntu:24.04) stop
     2015-05-12T15:53:45.999999999Z07:00  7805c1d35632: (from redis:7.2) die
     2015-05-12T15:54:03.999999999Z07:00  7805c1d35632: (from redis:7.2) stop
 
@@ -97,21 +97,21 @@ Lines. For information about JSON Lines, refer to https://jsonlines.org .
 ## Filters
 
     $ docker events --filter 'event=stop'
-    2014-05-10T17:42:14.999999999Z07:00 container stop 4386fb97867d (image=ubuntu:26.04)
+    2014-05-10T17:42:14.999999999Z07:00 container stop 4386fb97867d (image=ubuntu:24.04)
     2014-09-03T17:42:14.999999999Z07:00 container stop 7805c1d35632 (image=redis:7.2)
 
-    $ docker events --filter 'image=ubuntu:26.04'
-    2014-05-10T17:42:14.999999999Z07:00 container start 4386fb97867d (image=ubuntu:26.04)
-    2014-05-10T17:42:14.999999999Z07:00 container die 4386fb97867d (image=ubuntu:26.04)
-    2014-05-10T17:42:14.999999999Z07:00 container stop 4386fb97867d (image=ubuntu:26.04)
+    $ docker events --filter 'image=ubuntu:24.04'
+    2014-05-10T17:42:14.999999999Z07:00 container start 4386fb97867d (image=ubuntu:24.04)
+    2014-05-10T17:42:14.999999999Z07:00 container die 4386fb97867d (image=ubuntu:24.04)
+    2014-05-10T17:42:14.999999999Z07:00 container stop 4386fb97867d (image=ubuntu:24.04)
 
     $ docker events --filter 'container=7805c1d35632'
     2014-05-10T17:42:14.999999999Z07:00 container die 7805c1d35632 (image=redis:7.2)
     2014-09-03T15:49:29.999999999Z07:00 container stop 7805c1d35632 (image= redis:7.2)
 
     $ docker events --filter 'container=7805c1d35632' --filter 'container=4386fb97867d'
-    2014-09-03T15:49:29.999999999Z07:00 container die 4386fb97867d (image=ubuntu:26.04)
-    2014-05-10T17:42:14.999999999Z07:00 container stop 4386fb97867d (image=ubuntu:26.04)
+    2014-09-03T15:49:29.999999999Z07:00 container die 4386fb97867d (image=ubuntu:24.04)
+    2014-05-10T17:42:14.999999999Z07:00 container stop 4386fb97867d (image=ubuntu:24.04)
     2014-05-10T17:42:14.999999999Z07:00 container die 7805c1d35632 (image=redis:7.2)
     2014-09-03T15:49:29.999999999Z07:00 container stop 7805c1d35632 (image=redis:7.2)
 

man/src/system/info.md

@@ -71,8 +71,8 @@ Server:
   seccomp
    Profile: builtin
   cgroupns
- Kernel Version: 6.8.0-31-generic
- Operating System: Ubuntu 24.04 LTS
+ Kernel Version: 5.15.0-25-generic
+ Operating System: Ubuntu 22.04 LTS
  OSType: linux
  Architecture: x86_64
  CPUs: 1

opts/gpus.go

@@ -33,6 +33,8 @@ func parseCount(s string) (int, error) {
 }
 
 // Set a new mount value
+//
+//nolint:gocyclo
 func (o *GpuOpts) Set(value string) error {
 	csvReader := csv.NewReader(strings.NewReader(value))
 	fields, err := csvReader.Read()
@@ -46,14 +48,20 @@ func (o *GpuOpts) Set(value string) error {
 	// Set writable as the default
 	for _, field := range fields {
 		key, val, withValue := strings.Cut(field, "=")
-		if !withValue {
-			key, val = "count", key
-		}
 		if _, ok := seen[key]; ok {
 			return fmt.Errorf("gpu request key '%s' can be specified only once", key)
 		}
 		seen[key] = struct{}{}
 
+		if !withValue {
+			seen["count"] = struct{}{}
+			req.Count, err = parseCount(key)
+			if err != nil {
+				return err
+			}
+			continue
+		}
+
 		switch key {
 		case "driver":
 			req.Driver = val

opts/gpus_test.go

@@ -52,13 +52,3 @@ func TestGpusOpts(t *testing.T) {
 		}))
 	}
 }
-
-func TestGpusOptDuplicateCount(t *testing.T) {
-	for _, value := range []string{"count=1,2", "1,2", "all,1", "count=1,all", "1,count=2", "count=1,count=2"} {
-		t.Run(value, func(t *testing.T) {
-			var gpus GpuOpts
-			assert.Error(t, gpus.Set(value), "gpu request key 'count' can be specified only once")
-			assert.Assert(t, is.Len(gpus.Value(), 0))
-		})
-	}
-}

scripts/build/.variables

@@ -88,20 +88,13 @@ if [ "$CGO_ENABLED" = "1" ] && [ "$(go env GOOS)" != "windows" ]; then
 fi
 export GO_BUILDMODE
 
-# Omit DWARF debug information to reduce binary size, but retain the symbol
-# table for tools that inspect Go binaries. Pass GO_LDFLAGS="-w=0" to retain DWARF.
-GO_LDFLAGS="-w ${GO_LDFLAGS:-}"
-
-# Quotes are interpreted by Go's -ldflags parser, not the shell.
-# shellcheck disable=SC2089
-{
-    GO_LDFLAGS="$GO_LDFLAGS -X \"github.com/docker/cli/cli/version.GitCommit=${GITCOMMIT}\""
-    GO_LDFLAGS="$GO_LDFLAGS -X \"github.com/docker/cli/cli/version.BuildTime=${BUILDTIME}\""
-    GO_LDFLAGS="$GO_LDFLAGS -X \"github.com/docker/cli/cli/version.Version=${VERSION}\""
-    if test -n "${PLATFORM}"; then
-        GO_LDFLAGS="$GO_LDFLAGS -X \"github.com/docker/cli/cli/version.PlatformName=${PLATFORM}\""
-    fi
-}
+GO_LDFLAGS="${GO_LDFLAGS:-}"
+GO_LDFLAGS="$GO_LDFLAGS -X \"github.com/docker/cli/cli/version.GitCommit=${GITCOMMIT}\""
+GO_LDFLAGS="$GO_LDFLAGS -X \"github.com/docker/cli/cli/version.BuildTime=${BUILDTIME}\""
+GO_LDFLAGS="$GO_LDFLAGS -X \"github.com/docker/cli/cli/version.Version=${VERSION}\""
+if test -n "${PLATFORM}"; then
+    GO_LDFLAGS="$GO_LDFLAGS -X \"github.com/docker/cli/cli/version.PlatformName=${PLATFORM}\""
+fi
 if [ "$CGO_ENABLED" = "1" ] && [ "$GO_LINKMODE" = "static" ] && [ "$(go env GOOS)" = "linux" ]; then
     GO_LDFLAGS="$GO_LDFLAGS -linkmode external -extldflags -static"
 fi
@@ -135,7 +128,7 @@ if [ -n "$GO_STRIP" ]; then
     #  /usr/local/go/pkg/tool/linux_amd64/link: /usr/local/go/pkg/tool/linux_amd64/link: running strip failed: exit status 1
     #  llvm-strip: error: unsupported load command (cmd=0x5)
     # more info: https://github.com/docker/cli/pull/3717
-    GO_LDFLAGS="$GO_LDFLAGS -s"
+    GO_LDFLAGS="$GO_LDFLAGS -s -w"
 fi
 export GO_LDFLAGS="$GO_LDFLAGS" # https://github.com/koalaman/shellcheck/issues/2064
 

vendor.mod

@@ -21,11 +21,11 @@ require (
 	github.com/distribution/reference v0.6.0
 	github.com/docker/cli-docs-tool v0.11.0
 	github.com/docker/distribution v2.8.3+incompatible
-	github.com/docker/docker-credential-helpers v0.9.13
+	github.com/docker/docker-credential-helpers v0.9.9
 	github.com/docker/go-connections v0.8.2
 	github.com/docker/go-units v0.5.0
-	github.com/fvbommel/sortorder v1.2.1
-	github.com/go-jose/go-jose/v4 v4.1.7
+	github.com/fvbommel/sortorder v1.2.0
+	github.com/go-jose/go-jose/v4 v4.1.5
 	github.com/go-viper/mapstructure/v2 v2.5.0
 	github.com/gogo/protobuf v1.3.2
 	github.com/google/go-cmp v0.7.0
@@ -33,12 +33,12 @@ require (
 	github.com/google/uuid v1.6.0
 	github.com/mattn/go-runewidth v0.0.31
 	github.com/moby/go-archive v0.3.3
-	github.com/moby/moby/api v1.56.2-0.20261106011722-402d0a16f131
-	github.com/moby/moby/client v0.6.3-0.20261106011722-402d0a16f131
+	github.com/moby/moby/api v1.56.1
+	github.com/moby/moby/client v0.6.2
 	github.com/moby/patternmatcher v0.6.1
-	github.com/moby/swarmkit/v2 v2.1.3
+	github.com/moby/swarmkit/v2 v2.1.2
 	github.com/moby/sys/atomicwriter v0.1.0
-	github.com/moby/sys/capability v0.5.0
+	github.com/moby/sys/capability v0.4.0
 	github.com/moby/sys/sequential v0.7.0
 	github.com/moby/sys/signal v0.7.1
 	github.com/moby/sys/symlink v0.3.0
@@ -52,25 +52,25 @@ require (
 	github.com/spf13/cobra v1.10.2
 	github.com/spf13/pflag v1.0.10
 	github.com/tonistiigi/go-rosetta v0.0.0-20220804170347-3f4430f2d346
-	go.opentelemetry.io/contrib/instrumentation/net/http/otelhttp v0.72.0
-	go.opentelemetry.io/otel v1.47.0
-	go.opentelemetry.io/otel/exporters/otlp/otlpmetric/otlpmetricgrpc v1.47.0
-	go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracegrpc v1.47.0
-	go.opentelemetry.io/otel/metric v1.47.0
-	go.opentelemetry.io/otel/sdk v1.47.0
-	go.opentelemetry.io/otel/sdk/metric v1.47.0
-	go.opentelemetry.io/otel/trace v1.47.0
-	go.yaml.in/yaml/v3 v3.0.6
-	golang.org/x/sync v0.25.0
-	golang.org/x/sys v0.50.0
-	golang.org/x/term v0.48.0
-	golang.org/x/text v0.44.0
+	go.opentelemetry.io/contrib/instrumentation/net/http/otelhttp v0.71.0
+	go.opentelemetry.io/otel v1.46.0
+	go.opentelemetry.io/otel/exporters/otlp/otlpmetric/otlpmetricgrpc v1.46.0
+	go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracegrpc v1.46.0
+	go.opentelemetry.io/otel/metric v1.46.0
+	go.opentelemetry.io/otel/sdk v1.46.0
+	go.opentelemetry.io/otel/sdk/metric v1.46.0
+	go.opentelemetry.io/otel/trace v1.46.0
+	go.yaml.in/yaml/v3 v3.0.5
+	golang.org/x/sync v0.23.0
+	golang.org/x/sys v0.48.0
+	golang.org/x/term v0.46.0
+	golang.org/x/text v0.42.0
 	gotest.tools/v3 v3.5.2
 	tags.cncf.io/container-device-interface v1.1.1
 )
 
 require (
-	github.com/Azure/go-ansiterm v0.0.0-20261013165250-51075c6ea6bc // indirect
+	github.com/Azure/go-ansiterm v0.0.0-20261006220739-8c912ac31dd4 // indirect
 	github.com/Microsoft/go-winio v0.6.3 // indirect
 	github.com/beorn7/perks v1.0.1 // indirect
 	github.com/cenkalti/backoff/v5 v5.0.3 // indirect
@@ -87,7 +87,7 @@ require (
 	github.com/gorilla/mux v1.8.1 // indirect
 	github.com/grpc-ecosystem/grpc-gateway/v2 v2.30.0 // indirect
 	github.com/inconshreveable/mousetrap v1.1.0 // indirect
-	github.com/klauspost/compress v1.20.2 // indirect
+	github.com/klauspost/compress v1.20.1 // indirect
 	github.com/moby/docker-image-spec v1.3.1 // indirect
 	github.com/moby/sys/user v0.4.1 // indirect
 	github.com/moby/sys/userns v0.2.1 // indirect
@@ -99,14 +99,13 @@ require (
 	github.com/russross/blackfriday/v2 v2.1.0 // indirect
 	go.etcd.io/raft/v3 v3.6.0 // indirect
 	go.opentelemetry.io/auto/sdk v1.2.1 // indirect
-	go.opentelemetry.io/otel/exporters/otlp/otlptrace v1.47.0 // indirect
-	go.opentelemetry.io/otel/log v1.47.0 // indirect
+	go.opentelemetry.io/otel/exporters/otlp/otlptrace v1.46.0 // indirect
 	go.opentelemetry.io/proto/otlp v1.11.0 // indirect
-	golang.org/x/mod v0.43.0 // indirect
-	golang.org/x/net v0.62.0 // indirect
+	golang.org/x/mod v0.41.0 // indirect
+	golang.org/x/net v0.60.0 // indirect
 	golang.org/x/time v0.16.0 // indirect
-	google.golang.org/genproto/googleapis/api v0.0.0-20260928230214-8a89bd6388cc // indirect
-	google.golang.org/genproto/googleapis/rpc v0.0.0-20260928230214-8a89bd6388cc // indirect
+	google.golang.org/genproto/googleapis/api v0.0.0-20260825221802-da73d73af1c5 // indirect
+	google.golang.org/genproto/googleapis/rpc v0.0.0-20260825221802-da73d73af1c5 // indirect
 	google.golang.org/grpc v1.83.2 // indirect
 	google.golang.org/protobuf v1.36.12 // indirect
 )

vendor.sum

@@ -2,8 +2,8 @@ dario.cat/mergo v1.0.2 h1:85+piFYR1tMbRrLcDwR18y4UKJ3aH1Tbzi24VRW1TK8=
 dario.cat/mergo v1.0.2/go.mod h1:E/hbnu0NxMFBjpMIE34DRGLWqDy0g5FuKDhCb31ngxA=
 github.com/AdaLogics/go-fuzz-headers v0.0.0-20240806141605-e8a1dd7889d6 h1:He8afgbRMd7mFxO99hRNu+6tazq8nFF9lIwo9JFroBk=
 github.com/AdaLogics/go-fuzz-headers v0.0.0-20240806141605-e8a1dd7889d6/go.mod h1:8o94RPi1/7XTJvwPpRSzSUedZrtlirdB3r9Z20bi2f8=
-github.com/Azure/go-ansiterm v0.0.0-20261013165250-51075c6ea6bc h1:58s5YzGPNAP7+e1uemaL0ax/NPSeJOHdRpRIowd+JDk=
-github.com/Azure/go-ansiterm v0.0.0-20261013165250-51075c6ea6bc/go.mod h1:DMNF6Kxv+EcuUvVuNkvC3f+BjEEmc/Fn9aU+qiD8zpU=
+github.com/Azure/go-ansiterm v0.0.0-20261006220739-8c912ac31dd4 h1:m2xcjRABtG288vnlV3U/PKh/HnPURxZp50RKNUwBxM8=
+github.com/Azure/go-ansiterm v0.0.0-20261006220739-8c912ac31dd4/go.mod h1:MTUE7ZuZO89FAtAwozGg6AWD83pcdefnEq5gF82MB8s=
 github.com/Microsoft/go-winio v0.6.3 h1:M/52tsoyTfwaxajLnXZm7PqkbMGRH8iSWP+8fcg9MQ4=
 github.com/Microsoft/go-winio v0.6.3/go.mod h1:ma0QpxizD4fyyzJ1C7MIblymTD2Nxz5Mho/3CepwIZg=
 github.com/beorn7/perks v1.0.1 h1:VlbKKnNfV8bJzeqoa4cOKqO6bYr3WgKZxO8Z16+hsOM=
@@ -35,8 +35,8 @@ github.com/docker/cli-docs-tool v0.11.0 h1:7d8QARFb7QEobizqxmEM7fOteZEHwH/zWgHQt
 github.com/docker/cli-docs-tool v0.11.0/go.mod h1:ma8BKiisUo8D6W05XEYIh3oa1UbgrZhi1nowyKFJa8Q=
 github.com/docker/distribution v2.8.3+incompatible h1:AtKxIZ36LoNK51+Z6RpzLpddBirtxJnzDrHLEKxTAYk=
 github.com/docker/distribution v2.8.3+incompatible/go.mod h1:J2gT2udsDAN96Uj4KfcMRqY0/ypR+oyYUYmja8H+y+w=
-github.com/docker/docker-credential-helpers v0.9.13 h1:yLE5jCyKJraJaBACIGqgpLX0UheWfZUwBkIeCu6WPFU=
-github.com/docker/docker-credential-helpers v0.9.13/go.mod h1:v1S+hepowrQXITkEfw6o4+BMbGot02wiKpzWhGUZK6c=
+github.com/docker/docker-credential-helpers v0.9.9 h1:BkydjIgZ46JnDbqyM2p2fc63KMw6y+KHL3Em/2AGJ7w=
+github.com/docker/docker-credential-helpers v0.9.9/go.mod h1:v1S+hepowrQXITkEfw6o4+BMbGot02wiKpzWhGUZK6c=
 github.com/docker/go-connections v0.8.2 h1:9d9DEokx5W7qlr0shkFXIxEA7+TTD+llwzcykSlxMNc=
 github.com/docker/go-connections v0.8.2/go.mod h1:no1qkHdjq7kLMGUXYAduOhYPSJxxvgWBh7ogVvptn3Q=
 github.com/docker/go-events v0.1.0 h1:J8VX4H7Ta8mmBhv/K/24x1kosKOrEEnYmGjcdFHTOW0=
@@ -49,10 +49,10 @@ github.com/docker/libtrust v0.0.0-20160708172513-aabc10ec26b7 h1:UhxFibDNY/bfvqU
 github.com/docker/libtrust v0.0.0-20160708172513-aabc10ec26b7/go.mod h1:cyGadeNEkKy96OOhEzfZl+yxihPEzKnqJwvfuSUqbZE=
 github.com/felixge/httpsnoop v1.1.0 h1:3YtUj32ZZkqZtt3sZZsClsymw/QDuVfpNhoA31zeORc=
 github.com/felixge/httpsnoop v1.1.0/go.mod h1:Zqxgdd+1Rkcz8euOqdr7lqgCRJztwr5hp9vDSi5UZCE=
-github.com/fvbommel/sortorder v1.2.1 h1:ASc85RbthwLEqzuiCk7WQQiopfyGWQiEYZVJ3Qa4A+U=
-github.com/fvbommel/sortorder v1.2.1/go.mod h1:LbhO04ijZIeUuvz9B9BkI/qYrpZZEn1gWhxv4QjUKVs=
-github.com/go-jose/go-jose/v4 v4.1.7 h1:Nac/98uT5LPkfbiFuYa8ktf62a2VxwQ4xbq1GK8pV5E=
-github.com/go-jose/go-jose/v4 v4.1.7/go.mod h1:x4oUasVrzR7071A4TnHLGSPpNOm2a21K9Kf04k1rs08=
+github.com/fvbommel/sortorder v1.2.0 h1:TRIiRiGX+djh3Yf4FVxmWmAcYfIr5dH0NbzJWOSAWZk=
+github.com/fvbommel/sortorder v1.2.0/go.mod h1:LbhO04ijZIeUuvz9B9BkI/qYrpZZEn1gWhxv4QjUKVs=
+github.com/go-jose/go-jose/v4 v4.1.5 h1:RjgjO2LOtWOJKUC5wpwY9LR3B3vwVAz6JS2YHfYU6eA=
+github.com/go-jose/go-jose/v4 v4.1.5/go.mod h1:x4oUasVrzR7071A4TnHLGSPpNOm2a21K9Kf04k1rs08=
 github.com/go-logr/logr v1.2.2/go.mod h1:jdQByPbusPIv2/zmleS9BjJVeZ6kBagPoEUsqbVz/1A=
 github.com/go-logr/logr v1.4.4 h1:tG4xh9yMsRCAiodLVTxyrkzSZ9+o0L1Kg/+cPVcbP/8=
 github.com/go-logr/logr v1.4.4/go.mod h1:9T104GzyrTigFIr8wt5mBrctHMim0Nb2HLGrmQ40KvY=
@@ -78,8 +78,8 @@ github.com/inconshreveable/mousetrap v1.1.0 h1:wN+x4NVGpMsO7ErUn/mUI3vEoE6Jt13X2
 github.com/inconshreveable/mousetrap v1.1.0/go.mod h1:vpF70FUmC8bwa3OWnCshd2FqLfsEA9PFc4w1p2J65bw=
 github.com/kisielk/errcheck v1.5.0/go.mod h1:pFxgyoBC7bSaBwPgfKdkLd5X25qrDl4LWUI2bnpBCr8=
 github.com/kisielk/gotool v1.0.0/go.mod h1:XhKaO+MFFWcvkIS/tQcRk01m1F5IRFswLeQ+oQHNcck=
-github.com/klauspost/compress v1.20.2 h1:v5tiZvm1KGLyg5d5oXdXe3lsSPrbEUiKoXGia//I7Qo=
-github.com/klauspost/compress v1.20.2/go.mod h1:LUdAzn7YLVvxLpc7y3V1m40wESHTgc1422pwwBSKYuI=
+github.com/klauspost/compress v1.20.1 h1:T7kKElXUMXrUJ2E9QhQhxFtcK5rPyLdsGZvdbLMPdiQ=
+github.com/klauspost/compress v1.20.1/go.mod h1:LUdAzn7YLVvxLpc7y3V1m40wESHTgc1422pwwBSKYuI=
 github.com/kylelemons/godebug v1.1.0 h1:RPNrshWIDI6G2gRW9EHilWtl7Z6Sb1BR0xunSBf0SNc=
 github.com/kylelemons/godebug v1.1.0/go.mod h1:9/0rRGxNHcop5bhtWyNeEfOS8JIWk580+fNqagV/RAw=
 github.com/mattn/go-runewidth v0.0.31 h1:1oCV4ReTlosDBc6rYRw5cL8S/4y8iv5oRl4SJ5IBgwo=
@@ -88,18 +88,18 @@ github.com/moby/docker-image-spec v1.3.1 h1:jMKff3w6PgbfSa69GfNg+zN/XLhfXJGnEx3N
 github.com/moby/docker-image-spec v1.3.1/go.mod h1:eKmb5VW8vQEh/BAr2yvVNvuiJuY6UIocYsFu/DxxRpo=
 github.com/moby/go-archive v0.3.3 h1:OxxR9paxsluYi+zDUEXTTaIxtkK3viymW+Ka7vRhhME=
 github.com/moby/go-archive v0.3.3/go.mod h1:Npdv43fFqlhZW7Xo8fbm3ZMYFvAGNviUPqX21VERbcE=
-github.com/moby/moby/api v1.56.2-0.20261106011722-402d0a16f131 h1:tPz9ahj8F7AjQw62XQFP65kmoxF3rXTYSit3q06/yQc=
-github.com/moby/moby/api v1.56.2-0.20261106011722-402d0a16f131/go.mod h1:pRZ1QRtx6AVhdckeFYo4DUX4ASNF0SCllhyY6aj2mgg=
-github.com/moby/moby/client v0.6.3-0.20261106011722-402d0a16f131 h1:ReIO7lalQVE4BetZuIvrxScg8Rxv4Sk74XRs06ryRDU=
-github.com/moby/moby/client v0.6.3-0.20261106011722-402d0a16f131/go.mod h1:dPyRteJDuLdP8to3kWmNAU/tbMwSFCE88yKHvY/nZ9k=
+github.com/moby/moby/api v1.56.1 h1:PpWkvVPB7Fr/No8w+TfyJ/I6rWZ2YPZhT3JorIg+06c=
+github.com/moby/moby/api v1.56.1/go.mod h1:sZ+THbVWkjOmBPPfbnzdD/G1LuIexWhqlSHHPTDQ1Uk=
+github.com/moby/moby/client v0.6.2 h1:ekSPlMccrZGcw6Scb8T9D39qE0mB+XupU/yS0zNw9N4=
+github.com/moby/moby/client v0.6.2/go.mod h1:DGcnO7qmPJrqobx/ggQgQ/AUk+2wgVdQv7uxB0/mEsc=
 github.com/moby/patternmatcher v0.6.1 h1:qlhtafmr6kgMIJjKJMDmMWq7WLkKIo23hsrpR3x084U=
 github.com/moby/patternmatcher v0.6.1/go.mod h1:hDPoyOpDY7OrrMDLaYoY3hf52gNCR/YOUYxkhApJIxc=
-github.com/moby/swarmkit/v2 v2.1.3 h1:UcwtwkIRjr75qSgUWCTIuzKUzAXlidxsiqVMnyxSF1w=
-github.com/moby/swarmkit/v2 v2.1.3/go.mod h1:KhkxT93Hm4wHoNUPJ4JRD384pS7OODFGzJWoDRj9bLE=
+github.com/moby/swarmkit/v2 v2.1.2 h1:1WDZAI6HVYNKdCG4zlXnTAPyLsLwuhRGWlHoOUf5Z6I=
+github.com/moby/swarmkit/v2 v2.1.2/go.mod h1:GQ6T0ij2oBbWX10OHwpvK449xfXkQMZ8J+B+eQ4mgp4=
 github.com/moby/sys/atomicwriter v0.1.0 h1:kw5D/EqkBwsBFi0ss9v1VG3wIkVhzGvLklJ+w3A14Sw=
 github.com/moby/sys/atomicwriter v0.1.0/go.mod h1:Ul8oqv2ZMNHOceF643P6FKPXeCmYtlQMvpizfsSoaWs=
-github.com/moby/sys/capability v0.5.0 h1:Bm4oD9xGCtZguPnaoQy1/jvKTSwZHMvM0FrnxNYtGYU=
-github.com/moby/sys/capability v0.5.0/go.mod h1:i+0cXvNSriGrL3C6sxnmlmGL5HVU0OdxocizXdC8A+g=
+github.com/moby/sys/capability v0.4.0 h1:4D4mI6KlNtWMCM1Z/K0i7RV1FkX+DBDHKVJpCndZoHk=
+github.com/moby/sys/capability v0.4.0/go.mod h1:4g9IK291rVkms3LKCDOoYlnV8xKwoDTpIrNEE35Wq0I=
 github.com/moby/sys/mount v0.3.5 h1:eS3fsZTjHaBihwjp4/+5Z3jxqLXYsbwxqpVSfFv3M00=
 github.com/moby/sys/mount v0.3.5/go.mod h1:WUQDO+/uCiCIkIztx8SrwIDVn2dtMFRBebRhpDFT71M=
 github.com/moby/sys/mountinfo v0.7.2 h1:1shs6aH5s4o5H2zQLn796ADW1wMrIwHsyJ2v9KouLrg=
@@ -155,65 +155,63 @@ go.etcd.io/raft/v3 v3.6.0 h1:5NtvbDVYpnfZWcIHgGRk9DyzkBIXOi8j+DDp1IcnUWQ=
 go.etcd.io/raft/v3 v3.6.0/go.mod h1:nLvLevg6+xrVtHUmVaTcTz603gQPHfh7kUAwV6YpfGo=
 go.opentelemetry.io/auto/sdk v1.2.1 h1:jXsnJ4Lmnqd11kwkBV2LgLoFMZKizbCi5fNZ/ipaZ64=
 go.opentelemetry.io/auto/sdk v1.2.1/go.mod h1:KRTj+aOaElaLi+wW1kO/DZRXwkF4C5xPbEe3ZiIhN7Y=
-go.opentelemetry.io/contrib/instrumentation/net/http/otelhttp v0.72.0 h1:LxwW/9ctSCv+QkE/cLR7M91ZIkXNMqJtEMi1vCw9U8s=
-go.opentelemetry.io/contrib/instrumentation/net/http/otelhttp v0.72.0/go.mod h1:tOsftB4SslBwwErVEPaenU2RpThXWPIU8DoJHEC4dyw=
-go.opentelemetry.io/otel v1.47.0 h1:j7ALJ/zgkS7Z6aeJW09p8VC9804bC+PpeTfCD4XPnOM=
-go.opentelemetry.io/otel v1.47.0/go.mod h1:8wS9O2qfXrYrzp6hIF/HOYJJf/wIhFPhR2xLuP+iXQU=
-go.opentelemetry.io/otel/exporters/otlp/otlpmetric/otlpmetricgrpc v1.47.0 h1:LaLVGJtIzHcvHjVs2OftmKcc+M9mdOqS8vZ1fBD1Yes=
-go.opentelemetry.io/otel/exporters/otlp/otlpmetric/otlpmetricgrpc v1.47.0/go.mod h1:vF6H5sNDuQBJWgSX00iZgbIqk2MZZoVMH0ar5t5bOpw=
-go.opentelemetry.io/otel/exporters/otlp/otlptrace v1.47.0 h1:julhjPeUH/q/7hinbSdDdqt5h7Zw9YWmRlWRhI0jd54=
-go.opentelemetry.io/otel/exporters/otlp/otlptrace v1.47.0/go.mod h1:Ao2mz688LH/tFf0yMAenidq6k2YNSx6SIY2q6jDACck=
-go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracegrpc v1.47.0 h1:UFpxOpYPmMNUtOWhdb+nC1WELIgVf8z9higURrbzYU4=
-go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracegrpc v1.47.0/go.mod h1:YBGjxe3lt0jtXoEXxGrGhv/jM7oUBUDVK7zhAvNyEjc=
-go.opentelemetry.io/otel/log v1.47.0 h1:cOTS1CcLbSQeZKanGJ+0JpF/+t4PELi3O3bbl2lqCcI=
-go.opentelemetry.io/otel/log v1.47.0/go.mod h1:9byitSQ5pLC6PpqwGXjqdMKya6ZTswHRZh2vvXT33nw=
-go.opentelemetry.io/otel/metric v1.47.0 h1:4PptaldXx3Eat1XjMZ68pPJEs5wrhlemctZE9a3UdWY=
-go.opentelemetry.io/otel/metric v1.47.0/go.mod h1:ADGSXxRrXM6bjbvLo535EstVFlPpPYZm4LBKixjDHwU=
-go.opentelemetry.io/otel/metric/x v0.69.0 h1:DjRLr15H83v+hCW7JA9NoJvOkYTtmq5YoDRbe9deYpM=
-go.opentelemetry.io/otel/metric/x v0.69.0/go.mod h1:uVvsMPMFFyj/HUQfrUnH3JjnOQ1dwFDorgFLRBasM0k=
-go.opentelemetry.io/otel/sdk v1.47.0 h1:zWXEr4j2lFefG87TU6Yg8a7ngfohIKFZHKp0Hf5hC6I=
-go.opentelemetry.io/otel/sdk v1.47.0/go.mod h1:VUc24kiOeoGsxG8G9ULx3fWKvB7jMhnGE8Oi607lgR0=
-go.opentelemetry.io/otel/sdk/metric v1.47.0 h1:lfISg2j93VT6yqdk9OfUaZmw/GfcZqCCV3jdXtsPnKw=
-go.opentelemetry.io/otel/sdk/metric v1.47.0/go.mod h1:ypLp+mW1Nt2x+Szt3b5/i1syodyts49lMOwxpDI3VGw=
-go.opentelemetry.io/otel/trace v1.47.0 h1:JOjX/Oci8K94QHddo+bbfya/Ai/nf6/dt9ZfrFNWSrM=
-go.opentelemetry.io/otel/trace v1.47.0/go.mod h1:jNaSLa2PZEYFG6fRjJABAu+bw4FS08uDmPg28lTghu0=
+go.opentelemetry.io/contrib/instrumentation/net/http/otelhttp v0.71.0 h1:3g7B90UzBltIDKq1/5mrTGxTnOFDV0ICOhLoxiZ8jlg=
+go.opentelemetry.io/contrib/instrumentation/net/http/otelhttp v0.71.0/go.mod h1:Ef8SuTh59BT7+ofpDxN9z+yOlc4t2GjLmKDgYNJL/NU=
+go.opentelemetry.io/otel v1.46.0 h1:FHt5/CDyVxi/8IM1CH7VE/rRgq3kLHa2mSTVMO8AWyc=
+go.opentelemetry.io/otel v1.46.0/go.mod h1:Gj3SEScelsNC45tp4nSxRYlS+f5iez7W8XPMCt905kE=
+go.opentelemetry.io/otel/exporters/otlp/otlpmetric/otlpmetricgrpc v1.46.0 h1:qkDYCAFiZXLcs1L4aY+tP2wguQ4kURANqHOQMA2et2s=
+go.opentelemetry.io/otel/exporters/otlp/otlpmetric/otlpmetricgrpc v1.46.0/go.mod h1:tkipS4DRzmpAmvg+Gw4++O1IdDq6TVDnvnYU6cmbQVs=
+go.opentelemetry.io/otel/exporters/otlp/otlptrace v1.46.0 h1:OFnwLJr+pF3iHrlGSzbxyuo6/6HyBlnlN1CWEJmBVcw=
+go.opentelemetry.io/otel/exporters/otlp/otlptrace v1.46.0/go.mod h1:716wFneO0ov19A2beH5hjfh9AK5z/VWNAtDijp1Y0/g=
+go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracegrpc v1.46.0 h1:w53CDeOA/Kurp7yRsegSr6pbbr759dOvJ+yNmWM6Hxs=
+go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracegrpc v1.46.0/go.mod h1:BOmGMCbAtvcJiSJ+hLuhgPLdDbimnraSl8irz3iY8sY=
+go.opentelemetry.io/otel/metric v1.46.0 h1:yBnkXvgV7AXFILZc5K6IZe/CBFF3OS7BJ8ov6/lj0K8=
+go.opentelemetry.io/otel/metric v1.46.0/go.mod h1:iPmdWqifKUdzziPkvvzIJXITl56fQx2mGM/DHLB3/2o=
+go.opentelemetry.io/otel/metric/x v0.68.0 h1:TA/cBT23D3MnxYPwHL7YFOdYGdx0A0v+s7Mzotpd1dU=
+go.opentelemetry.io/otel/metric/x v0.68.0/go.mod h1:agudOmvWhwUTjgibWDzxD2PoWYnpw5Ht5jISYOD2Hd4=
+go.opentelemetry.io/otel/sdk v1.46.0 h1:h5CNQQjEbuQXY/JfZtgt3i7HVFV3aHPO2OAwO2eTYPI=
+go.opentelemetry.io/otel/sdk v1.46.0/go.mod h1:GAERFXFt5SYCEB+YiKUbMBeza6UaDH7GmGOZEfh2gSM=
+go.opentelemetry.io/otel/sdk/metric v1.46.0 h1:0piZ26EG4RBfebb2jhDH6ERCYHoVWduc3kLgPCwSnSE=
+go.opentelemetry.io/otel/sdk/metric v1.46.0/go.mod h1:I1PbKrdVc8Qu8HYVDNtqVIwLwjNrhsV/uFuxfwg8mO4=
+go.opentelemetry.io/otel/trace v1.46.0 h1:OULy7ccdJnZtJ0UDYFOIGaCmiWzJ8Vi2G/Rsu60qs1c=
+go.opentelemetry.io/otel/trace v1.46.0/go.mod h1:J7GAXweO77XSFkB/rmAqk9D6ihszhFjLU+d9WuUxDLI=
 go.opentelemetry.io/proto/otlp v1.11.0 h1:5rrYs0Ykyj50sdU/JU0x8etU+LubXWb+gED6TbEdMIk=
 go.opentelemetry.io/proto/otlp v1.11.0/go.mod h1:SmVizdCOAm3XBtG1g1NnOdhW6jtddT72hLMhv8VwA8E=
 go.uber.org/goleak v1.3.0 h1:2K3zAYmnTNqV73imy9J1T3WC+gmCePx2hEGkimedGto=
 go.uber.org/goleak v1.3.0/go.mod h1:CoHD4mav9JJNrW/WLlf7HGZPjdw8EucARQHekz1X6bE=
 go.yaml.in/yaml/v3 v3.0.4/go.mod h1:DhzuOOF2ATzADvBadXxruRBLzYTpT36CKvDb3+aBEFg=
-go.yaml.in/yaml/v3 v3.0.6 h1:zcDfvjXEqTQmpjniUBLc91xYJMB2c4QOFxEF/LCEckM=
-go.yaml.in/yaml/v3 v3.0.6/go.mod h1:HVTZu1O7/Vkt2N+BFy8Zza+lnLsABggaTM2ZpNIGuKg=
+go.yaml.in/yaml/v3 v3.0.5 h1:N6y/pJk8buWs9NY5ERU2HSMfm+IuD/OtfdAnq6kESPw=
+go.yaml.in/yaml/v3 v3.0.5/go.mod h1:HVTZu1O7/Vkt2N+BFy8Zza+lnLsABggaTM2ZpNIGuKg=
 golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
 golang.org/x/crypto v0.0.0-20191011191535-87dc89f01550/go.mod h1:yigFU9vqHzYiE8UmvKecakEJjdnWj3jj499lnFckfCI=
 golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
 golang.org/x/mod v0.2.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
 golang.org/x/mod v0.3.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
-golang.org/x/mod v0.43.0 h1:MFuq5J6s35W9D3IjkwyWc9vHh0nENOrt5K8Iof4ofmg=
-golang.org/x/mod v0.43.0/go.mod h1:4ec1JnuyBz5+FIVhg86UsA39YG8BpnrZdJYSNHmGzHY=
+golang.org/x/mod v0.41.0 h1:qJmnOUb4YB+FsEuM3HcWucdZASCPGhsX6uljO6pog0c=
+golang.org/x/mod v0.41.0/go.mod h1:Ek9pY8RKWXwsWvd3rQiHYtMqkjSUV+s1Rj7j4H5Ur6o=
 golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
 golang.org/x/net v0.0.0-20190620200207-3b0461eec859/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
 golang.org/x/net v0.0.0-20200226121028-0de0cce0169b/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
 golang.org/x/net v0.0.0-20201021035429-f5854403a974/go.mod h1:sp8m0HH+o8qH0wwXwYZr8TS3Oi6o0r6Gce1SSxlDquU=
-golang.org/x/net v0.62.0 h1:18ELalfM5+XNRwzM2nYqXsZQ9ByS1uhj2O/U7+5jqRY=
-golang.org/x/net v0.62.0/go.mod h1:WgDCOTH8iwtB66T4/GfI94AHo/hhdb7Hah9NDseQfiI=
+golang.org/x/net v0.60.0 h1:79p50tfZlm0J9YfoDsSi639qSXNGVwEzOPLCxM2FsYU=
+golang.org/x/net v0.60.0/go.mod h1:2DA/G1UfVbCpQPeWTmMPGY7Cs2PkBkwu743bVX5PIVg=
 golang.org/x/sync v0.0.0-20190423024810-112230192c58/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
 golang.org/x/sync v0.0.0-20190911185100-cd5d95a43a6e/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
 golang.org/x/sync v0.0.0-20201020160332-67f06af15bc9/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
-golang.org/x/sync v0.25.0 h1:dJnifr0nMV8/SBnBvdo4eSGGnrc3O4FFx6IqvtLcmRs=
-golang.org/x/sync v0.25.0/go.mod h1:sUUOizhqBxiL6pEWpqNLUiaJn1ShEbZ6BBqskPbjZm0=
+golang.org/x/sync v0.23.0 h1:KameEIfc1IkluZyXWLn39Wd4tURc6GbCiISGiZm2bQk=
+golang.org/x/sync v0.23.0/go.mod h1:sUUOizhqBxiL6pEWpqNLUiaJn1ShEbZ6BBqskPbjZm0=
 golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
 golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
 golang.org/x/sys v0.0.0-20200930185726-fdedc70b468f/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
 golang.org/x/sys v0.1.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/sys v0.50.0 h1:dkKZEFTEKaLr1sjhs0WiKqoi8Jj5nHbS3Njmx1UoMJs=
-golang.org/x/sys v0.50.0/go.mod h1:hNLxWAXmnKAxqDtdwIYC4bM9oQPEecfsnNMuSxOs3og=
-golang.org/x/term v0.48.0 h1:G6UU1eiSB8nl3DzeUGt7Mg+2SctI8tPS6Z5/mBt6cOk=
-golang.org/x/term v0.48.0/go.mod h1:BRDLHCZr2SUjIeBHHpRyQeC9xzSAVbzY2rvKgafnHf4=
+golang.org/x/sys v0.48.0 h1:bbX/i/6MgT9BVLM9RT1thmxL04yeTAhbEz4SyadbXoo=
+golang.org/x/sys v0.48.0/go.mod h1:hNLxWAXmnKAxqDtdwIYC4bM9oQPEecfsnNMuSxOs3og=
+golang.org/x/term v0.46.0 h1:3+OXuTbaKDgwk8jTi3aSLHRlmWqHEUDUtxnbFigO4YE=
+golang.org/x/term v0.46.0/go.mod h1:+K02xbkittuwc0Am4abfA3Fc+XRGXkvBXNO88NCXPoc=
 golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
 golang.org/x/text v0.3.3/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
-golang.org/x/text v0.44.0 h1:YItdp/mQNGnsmrgpcdA5yQ3bnRxCfo/Tj/iByGW9GGo=
-golang.org/x/text v0.44.0/go.mod h1:S4FR1waQ9LbjQTls97SyRjDaUUVkaM+cXwwuG/G+MwY=
+golang.org/x/text v0.42.0 h1:JbOZXgfeCPU9gacVtYliJqOhD+zhrEqK4LfdpmlUZqI=
+golang.org/x/text v0.42.0/go.mod h1:ojzP1Z+2QtioaF8DTtO8K5q7JWVVYwZKenzujK0Zd0E=
 golang.org/x/time v0.16.0 h1:vMb6ptszcQMkcwiRTAuNNU50gom6++Q/6gY2hDM6VDE=
 golang.org/x/time v0.16.0/go.mod h1:rVKOqvZeKvrDKTQiAHJ7wmwP0RzleSphoEA9RcdLA0s=
 golang.org/x/tools v0.0.0-20180917221912-90fa682c2a6e/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
@@ -226,10 +224,10 @@ golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543/go.mod h1:I/5z698sn9Ka8T
 golang.org/x/xerrors v0.0.0-20200804184101-5ec99f83aff1/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
 gonum.org/v1/gonum v0.17.0 h1:VbpOemQlsSMrYmn7T2OUvQ4dqxQXU+ouZFQsZOx50z4=
 gonum.org/v1/gonum v0.17.0/go.mod h1:El3tOrEuMpv2UdMrbNlKEh9vd86bmQ6vqIcDwxEOc1E=
-google.golang.org/genproto/googleapis/api v0.0.0-20260928230214-8a89bd6388cc h1:rZHRz0ogq4Pid1IKtA/ivHi8XONVF5tqUQXA2TtgpkE=
-google.golang.org/genproto/googleapis/api v0.0.0-20260928230214-8a89bd6388cc/go.mod h1:K/n0XLazCJHjD73YuMyNJsN38BPPy1kfFnKxUXaThFU=
-google.golang.org/genproto/googleapis/rpc v0.0.0-20260928230214-8a89bd6388cc h1:4bNTbnb44EqGVy9HaQxSY2jnafSUdgV3qHtedvNpDKg=
-google.golang.org/genproto/googleapis/rpc v0.0.0-20260928230214-8a89bd6388cc/go.mod h1:OaIUM3+LpYcK2GXM4FTmhWoIq371Owdr+Cc7/BsYHHc=
+google.golang.org/genproto/googleapis/api v0.0.0-20260825221802-da73d73af1c5 h1:izFU9hz7aeLI/Mi1J0991ae+xcwRLr7hTqWnB/9aIIU=
+google.golang.org/genproto/googleapis/api v0.0.0-20260825221802-da73d73af1c5/go.mod h1:3LhxRw4YYkf+ylAfgaY9JlVLFKhokkCV8duhLLe7+t0=
+google.golang.org/genproto/googleapis/rpc v0.0.0-20260825221802-da73d73af1c5 h1:1VUiZAXyC+zmiFYi+WLtBzr68Cj8wOofHjjrA/kkizc=
+google.golang.org/genproto/googleapis/rpc v0.0.0-20260825221802-da73d73af1c5/go.mod h1:DjtHYE8FKJLivXcBEjGwndXfIC23G0VpXiXKqG179uA=
 google.golang.org/grpc v1.83.2 h1:EManeRomTObA0BU7I8vXgg/78uE5MJ9M8B39EX2WscU=
 google.golang.org/grpc v1.83.2/go.mod h1:YPI1hK3kDked6iHvgX3tR0y+nX/qpMFKhPgFsokw1S8=
 google.golang.org/protobuf v1.36.12 h1:pJOKDDOyeXErUroCihFAd5LQuwXBSpVnKGrj5o/fwxc=
@@ -237,5 +235,7 @@ google.golang.org/protobuf v1.36.12/go.mod h1:HTf+CrKn2C3g5S8VImy6tdcUvCska2kB7j
 gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
 gotest.tools/v3 v3.5.2 h1:7koQfIKdy+I8UTetycgUqXWSDwpgv193Ka+qRsmBY8Q=
 gotest.tools/v3 v3.5.2/go.mod h1:LtdLGcnqToBH83WByAAi/wiwSFCArdFIUV/xxN4pcjA=
+pgregory.net/rapid v1.2.0 h1:keKAYRcjm+e1F0oAuU5F5+YPAWcyxNNRK2wud503Gnk=
+pgregory.net/rapid v1.2.0/go.mod h1:PY5XlDGj0+V1FCq0o192FdRhpKHGTRIWBgqjDBTrq04=
 tags.cncf.io/container-device-interface v1.1.1 h1:YPwQz4xg8PlQ0yT/baR0BtLpTQROe4l6M1yuRgAu1vc=
 tags.cncf.io/container-device-interface v1.1.1/go.mod h1:S1PSJWYPD4Iom0/39mvr/VVFCfG0Yt14j20d0OYrY2M=

vendor/github.com/Azure/go-ansiterm/csi_entry_state.go

@@ -1,7 +1,5 @@
 package ansiterm
 
-import "slices"
-
 type csiEntryState struct {
 	baseState
 }
@@ -15,11 +13,11 @@ func (csiState csiEntryState) Handle(b byte) (s state, e error) {
 	}
 
 	switch {
-	case slices.Contains(alphabetics, b):
+	case sliceContains(alphabetics, b):
 		return csiState.parser.ground, nil
-	case slices.Contains(csiCollectables, b):
+	case sliceContains(csiCollectables, b):
 		return csiState.parser.csiParam, nil
-	case slices.Contains(executors, b):
+	case sliceContains(executors, b):
 		return csiState, csiState.parser.execute()
 	}
 
@@ -35,9 +33,9 @@ func (csiState csiEntryState) Transition(s state) error {
 		return csiState.parser.csiDispatch()
 	case csiState.parser.csiParam:
 		switch {
-		case slices.Contains(csiParams, csiState.parser.context.currentChar):
+		case sliceContains(csiParams, csiState.parser.context.currentChar):
 			_ = csiState.parser.collectParam()
-		case slices.Contains(intermeds, csiState.parser.context.currentChar):
+		case sliceContains(intermeds, csiState.parser.context.currentChar):
 			_ = csiState.parser.collectInter()
 		}
 	}

vendor/github.com/Azure/go-ansiterm/csi_param_state.go

@@ -1,7 +1,5 @@
 package ansiterm
 
-import "slices"
-
 type csiParamState struct {
 	baseState
 }
@@ -15,11 +13,11 @@ func (csiState csiParamState) Handle(b byte) (s state, e error) {
 	}
 
 	switch {
-	case slices.Contains(alphabetics, b):
+	case sliceContains(alphabetics, b):
 		return csiState.parser.ground, nil
-	case slices.Contains(csiCollectables, b):
+	case sliceContains(csiCollectables, b):
 		return csiState, csiState.parser.collectParam()
-	case slices.Contains(executors, b):
+	case sliceContains(executors, b):
 		return csiState, csiState.parser.execute()
 	}
 

vendor/github.com/Azure/go-ansiterm/escape_intermediate_state.go

@@ -1,7 +1,5 @@
 package ansiterm
 
-import "slices"
-
 type escapeIntermediateState struct {
 	baseState
 }
@@ -14,11 +12,11 @@ func (escState escapeIntermediateState) Handle(b byte) (s state, e error) {
 	}
 
 	switch {
-	case slices.Contains(intermeds, b):
+	case sliceContains(intermeds, b):
 		return escState, escState.parser.collectInter()
-	case slices.Contains(executors, b):
+	case sliceContains(executors, b):
 		return escState, escState.parser.execute()
-	case slices.Contains(escapeIntermediateToGroundBytes, b):
+	case sliceContains(escapeIntermediateToGroundBytes, b):
 		return escState.parser.ground, nil
 	}
 

vendor/github.com/Azure/go-ansiterm/escape_state.go

@@ -1,7 +1,5 @@
 package ansiterm
 
-import "slices"
-
 type escapeState struct {
 	baseState
 }
@@ -18,11 +16,11 @@ func (escState escapeState) Handle(b byte) (s state, e error) {
 		return escState.parser.csiEntry, nil
 	case b == ANSI_OSC_STRING_ENTRY:
 		return escState.parser.oscString, nil
-	case slices.Contains(executors, b):
+	case sliceContains(executors, b):
 		return escState, escState.parser.execute()
-	case slices.Contains(escapeToGroundBytes, b):
+	case sliceContains(escapeToGroundBytes, b):
 		return escState.parser.ground, nil
-	case slices.Contains(intermeds, b):
+	case sliceContains(intermeds, b):
 		return escState.parser.escapeIntermediate, nil
 	}
 

vendor/github.com/Azure/go-ansiterm/ground_state.go

@@ -1,7 +1,5 @@
 package ansiterm
 
-import "slices"
-
 type groundState struct {
 	baseState
 }
@@ -15,10 +13,10 @@ func (gs groundState) Handle(b byte) (s state, e error) {
 	}
 
 	switch {
-	case slices.Contains(printables, b):
+	case sliceContains(printables, b):
 		return gs, gs.parser.print()
 
-	case slices.Contains(executors, b):
+	case sliceContains(executors, b):
 		return gs, gs.parser.execute()
 	}
 

vendor/github.com/Azure/go-ansiterm/parser.go

@@ -20,12 +20,12 @@ type AnsiParser struct {
 	oscString          state
 	stateMap           []state
 
-	logf func(string, ...any)
+	logf func(string, ...interface{})
 }
 
 type Option func(*AnsiParser)
 
-func WithLogf(f func(string, ...any)) Option {
+func WithLogf(f func(string, ...interface{})) Option {
 	return func(ap *AnsiParser) {
 		ap.logf = f
 	}
@@ -45,7 +45,7 @@ func CreateParser(initialState string, evtHandler AnsiEventHandler, opts ...Opti
 		logger := log.New(logFile, "", log.LstdFlags)
 		if ap.logf != nil {
 			l := ap.logf
-			ap.logf = func(s string, v ...any) {
+			ap.logf = func(s string, v ...interface{}) {
 				l(s, v...)
 				logger.Printf(s, v...)
 			}
@@ -55,7 +55,7 @@ func CreateParser(initialState string, evtHandler AnsiEventHandler, opts ...Opti
 	}
 
 	if ap.logf == nil {
-		ap.logf = func(string, ...any) {}
+		ap.logf = func(string, ...interface{}) {}
 	}
 
 	ap.csiEntry = csiEntryState{baseState{name: "CsiEntry", parser: ap}}

vendor/github.com/Azure/go-ansiterm/parser_action_helpers.go

@@ -49,7 +49,7 @@ func getInts(params []string, minCount int, dflt int) []int {
 
 	if len(ints) < minCount {
 		remaining := minCount - len(ints)
-		for range remaining {
+		for i := 0; i < remaining; i++ {
 			ints = append(ints, dflt)
 		}
 	}

vendor/github.com/Azure/go-ansiterm/states.go

@@ -1,7 +1,5 @@
 package ansiterm
 
-import "slices"
-
 type state interface {
 	Enter() error
 	Exit() error
@@ -34,7 +32,7 @@ func (base baseState) Handle(b byte) (s state, e error) {
 		return base.parser.escape, nil
 	case b == OSC_STRING:
 		return base.parser.oscString, nil
-	case slices.Contains(toGroundBytes, b):
+	case sliceContains(toGroundBytes, b):
 		return base.parser.ground, nil
 	}
 
@@ -54,7 +52,7 @@ func (base baseState) Transition(s state) error {
 		execBytes = append(execBytes, 0x99)
 		execBytes = append(execBytes, 0x9A)
 
-		if slices.Contains(execBytes, base.parser.context.currentChar) {
+		if sliceContains(execBytes, base.parser.context.currentChar) {
 			return base.parser.execute()
 		}
 	}

vendor/github.com/Azure/go-ansiterm/utilities.go

@@ -0,0 +1,11 @@
+package ansiterm
+
+func sliceContains(bytes []byte, b byte) bool {
+	for _, v := range bytes {
+		if v == b {
+			return true
+		}
+	}
+
+	return false
+}

vendor/github.com/Azure/go-ansiterm/winterm/ansi.go

@@ -1,4 +1,4 @@
-//go:build windows
+// +build windows
 
 package winterm
 

vendor/github.com/Azure/go-ansiterm/winterm/api.go

@@ -1,17 +1,14 @@
-//go:build windows
+// +build windows
 
 package winterm
 
 import (
 	"fmt"
-	"runtime"
 	"syscall"
 	"unsafe"
-
-	"golang.org/x/sys/windows"
 )
 
-// ===========================================================================================================
+//===========================================================================================================
 // IMPORTANT NOTE:
 //
 //	The methods below make extensive use of the "unsafe" package to obtain the required pointers.
@@ -29,50 +26,51 @@ import (
 //	-- The value is not referenced by the method after passing the pointer to Windows
 //
 //	See http://golang.org/doc/go1.3.
-// ===========================================================================================================
+//===========================================================================================================
 
 var (
-	kernel32DLL = windows.NewLazyDLL("kernel32.dll")
+	kernel32DLL = syscall.NewLazyDLL("kernel32.dll")
 
 	getConsoleCursorInfoProc       = kernel32DLL.NewProc("GetConsoleCursorInfo")
 	setConsoleCursorInfoProc       = kernel32DLL.NewProc("SetConsoleCursorInfo")
+	setConsoleCursorPositionProc   = kernel32DLL.NewProc("SetConsoleCursorPosition")
+	setConsoleModeProc             = kernel32DLL.NewProc("SetConsoleMode")
+	getConsoleScreenBufferInfoProc = kernel32DLL.NewProc("GetConsoleScreenBufferInfo")
 	setConsoleScreenBufferSizeProc = kernel32DLL.NewProc("SetConsoleScreenBufferSize")
 	scrollConsoleScreenBufferProc  = kernel32DLL.NewProc("ScrollConsoleScreenBufferA")
 	setConsoleTextAttributeProc    = kernel32DLL.NewProc("SetConsoleTextAttribute")
 	setConsoleWindowInfoProc       = kernel32DLL.NewProc("SetConsoleWindowInfo")
 	writeConsoleOutputProc         = kernel32DLL.NewProc("WriteConsoleOutputW")
 	readConsoleInputProc           = kernel32DLL.NewProc("ReadConsoleInputW")
+	waitForSingleObjectProc        = kernel32DLL.NewProc("WaitForSingleObject")
 )
 
-// Console modes
-// See https://msdn.microsoft.com/en-us/library/windows/desktop/ms686033(v=vs.85).aspx.
+// Windows Console constants
 const (
-	ENABLE_PROCESSED_INPUT        = windows.ENABLE_PROCESSED_INPUT
-	ENABLE_LINE_INPUT             = windows.ENABLE_LINE_INPUT
-	ENABLE_ECHO_INPUT             = windows.ENABLE_ECHO_INPUT
-	ENABLE_WINDOW_INPUT           = windows.ENABLE_WINDOW_INPUT
-	ENABLE_MOUSE_INPUT            = windows.ENABLE_MOUSE_INPUT
-	ENABLE_INSERT_MODE            = windows.ENABLE_INSERT_MODE
-	ENABLE_QUICK_EDIT_MODE        = windows.ENABLE_QUICK_EDIT_MODE
-	ENABLE_EXTENDED_FLAGS         = windows.ENABLE_EXTENDED_FLAGS
-	ENABLE_AUTO_POSITION          = windows.ENABLE_AUTO_POSITION
-	ENABLE_VIRTUAL_TERMINAL_INPUT = windows.ENABLE_VIRTUAL_TERMINAL_INPUT
+	// Console modes
+	// See https://msdn.microsoft.com/en-us/library/windows/desktop/ms686033(v=vs.85).aspx.
+	ENABLE_PROCESSED_INPUT        = 0x0001
+	ENABLE_LINE_INPUT             = 0x0002
+	ENABLE_ECHO_INPUT             = 0x0004
+	ENABLE_WINDOW_INPUT           = 0x0008
+	ENABLE_MOUSE_INPUT            = 0x0010
+	ENABLE_INSERT_MODE            = 0x0020
+	ENABLE_QUICK_EDIT_MODE        = 0x0040
+	ENABLE_EXTENDED_FLAGS         = 0x0080
+	ENABLE_AUTO_POSITION          = 0x0100
+	ENABLE_VIRTUAL_TERMINAL_INPUT = 0x0200
 
-	ENABLE_PROCESSED_OUTPUT            = windows.ENABLE_PROCESSED_OUTPUT
-	ENABLE_WRAP_AT_EOL_OUTPUT          = windows.ENABLE_WRAP_AT_EOL_OUTPUT
-	ENABLE_VIRTUAL_TERMINAL_PROCESSING = windows.ENABLE_VIRTUAL_TERMINAL_PROCESSING
-	DISABLE_NEWLINE_AUTO_RETURN        = windows.DISABLE_NEWLINE_AUTO_RETURN
-	ENABLE_LVB_GRID_WORLDWIDE          = windows.ENABLE_LVB_GRID_WORLDWIDE
-)
+	ENABLE_PROCESSED_OUTPUT            = 0x0001
+	ENABLE_WRAP_AT_EOL_OUTPUT          = 0x0002
+	ENABLE_VIRTUAL_TERMINAL_PROCESSING = 0x0004
+	DISABLE_NEWLINE_AUTO_RETURN        = 0x0008
+	ENABLE_LVB_GRID_WORLDWIDE          = 0x0010
 
-// Character attributes
-//
-// Foreground and background attributes can be combined to produce colors.
-// Clearing all foreground or background color bits produces black; setting
-// all color bits produces white.
-//
-// See https://learn.microsoft.com/windows/console/char-info-str.
-const (
+	// Character attributes
+	// Note:
+	// -- The attributes are combined to produce various colors (e.g., Blue + Green will create Cyan).
+	//    Clearing all foreground or background colors results in black; setting all creates white.
+	// See https://msdn.microsoft.com/en-us/library/windows/desktop/ms682088(v=vs.85).aspx#_win32_character_attributes.
 	FOREGROUND_BLUE      uint16 = 0x0001
 	FOREGROUND_GREEN     uint16 = 0x0002
 	FOREGROUND_RED       uint16 = 0x0004
@@ -88,29 +86,23 @@ const (
 	COMMON_LVB_MASK          uint16 = 0xFF00
 	COMMON_LVB_REVERSE_VIDEO uint16 = 0x4000
 	COMMON_LVB_UNDERSCORE    uint16 = 0x8000
-)
 
-// Input event types
-// See https://msdn.microsoft.com/en-us/library/windows/desktop/ms683499(v=vs.85).aspx.
-const (
-	KEY_EVENT                = windows.KEY_EVENT
-	MOUSE_EVENT              = windows.MOUSE_EVENT
-	WINDOW_BUFFER_SIZE_EVENT = windows.WINDOW_BUFFER_SIZE_EVENT
-	MENU_EVENT               = windows.MENU_EVENT
-	FOCUS_EVENT              = windows.FOCUS_EVENT
-)
+	// Input event types
+	// See https://msdn.microsoft.com/en-us/library/windows/desktop/ms683499(v=vs.85).aspx.
+	KEY_EVENT                = 0x0001
+	MOUSE_EVENT              = 0x0002
+	WINDOW_BUFFER_SIZE_EVENT = 0x0004
+	MENU_EVENT               = 0x0008
+	FOCUS_EVENT              = 0x0010
 
-// WaitForSingleObject return codes.
-const (
-	WAIT_ABANDONED = windows.WAIT_ABANDONED
-	WAIT_FAILED    = windows.WAIT_FAILED
-	WAIT_SIGNALED  = windows.WAIT_OBJECT_0
-	WAIT_TIMEOUT   = 0x00000102 // Keep as untyped int for backward compat; windows.WAIT_TIMEOUT is typed as syscall.Errno.
-)
+	// WaitForSingleObject return codes
+	WAIT_ABANDONED = 0x00000080
+	WAIT_FAILED    = 0xFFFFFFFF
+	WAIT_SIGNALED  = 0x0000000
+	WAIT_TIMEOUT   = 0x00000102
 
-// WaitForSingleObject wait durations.
-const (
-	WAIT_INFINITE       = windows.INFINITE
+	// WaitForSingleObject wait duration
+	WAIT_INFINITE       = 0xFFFFFFFF
 	WAIT_ONE_SECOND     = 1000
 	WAIT_HALF_SECOND    = 500
 	WAIT_QUARTER_SECOND = 250
@@ -130,8 +122,6 @@ type (
 		Visible int32
 	}
 
-	// CONSOLE_SCREEN_BUFFER_INFO is identical to [windows.ConsoleScreenBufferInfo]
-	// but implements [fmt.Stringer].
 	CONSOLE_SCREEN_BUFFER_INFO struct {
 		Size              COORD
 		CursorPosition    COORD
@@ -140,11 +130,17 @@ type (
 		MaximumWindowSize COORD
 	}
 
-	// COORD is identical to [windows.Coord] but implements [fmt.Stringer].
-	COORD windows.Coord
+	COORD struct {
+		X int16
+		Y int16
+	}
 
-	// SMALL_RECT is identical to [windows.SmallRect] but implements [fmt.Stringer].
-	SMALL_RECT windows.SmallRect
+	SMALL_RECT struct {
+		Left   int16
+		Top    int16
+		Right  int16
+		Bottom int16
+	}
 
 	// INPUT_RECORD is a C/C++ union of which KEY_EVENT_RECORD is one case, it is also the largest
 	// See https://msdn.microsoft.com/en-us/library/windows/desktop/ms683499(v=vs.85).aspx.
@@ -193,45 +189,43 @@ func SetConsoleCursorInfo(handle uintptr, cursorInfo *CONSOLE_CURSOR_INFO) error
 // SetConsoleCursorPosition location of the console cursor.
 // See https://msdn.microsoft.com/en-us/library/windows/desktop/ms686025(v=vs.85).aspx.
 func SetConsoleCursorPosition(handle uintptr, coord COORD) error {
-	return windows.SetConsoleCursorPosition(windows.Handle(handle), windows.Coord(coord))
+	r1, r2, err := setConsoleCursorPositionProc.Call(handle, coordToPointer(coord))
+	use(coord)
+	return checkError(r1, r2, err)
 }
 
-// GetConsoleMode gets the console mode for the given handle.
+// GetConsoleMode gets the console mode for given file descriptor
 // See http://msdn.microsoft.com/en-us/library/windows/desktop/ms683167(v=vs.85).aspx.
 func GetConsoleMode(handle uintptr) (mode uint32, err error) {
-	err = windows.GetConsoleMode(windows.Handle(handle), &mode)
+	err = syscall.GetConsoleMode(syscall.Handle(handle), &mode)
 	return mode, err
 }
 
-// SetConsoleMode sets the console mode for the given handle.
+// SetConsoleMode sets the console mode for given file descriptor
 // See http://msdn.microsoft.com/en-us/library/windows/desktop/ms686033(v=vs.85).aspx.
 func SetConsoleMode(handle uintptr, mode uint32) error {
-	return windows.SetConsoleMode(windows.Handle(handle), mode)
+	r1, r2, err := setConsoleModeProc.Call(handle, uintptr(mode), 0)
+	use(mode)
+	return checkError(r1, r2, err)
 }
 
 // GetConsoleScreenBufferInfo retrieves information about the specified console screen buffer.
 // See http://msdn.microsoft.com/en-us/library/windows/desktop/ms683171(v=vs.85).aspx.
 func GetConsoleScreenBufferInfo(handle uintptr) (*CONSOLE_SCREEN_BUFFER_INFO, error) {
-	var info windows.ConsoleScreenBufferInfo
-	if err := windows.GetConsoleScreenBufferInfo(windows.Handle(handle), &info); err != nil {
+	info := CONSOLE_SCREEN_BUFFER_INFO{}
+	err := checkError(getConsoleScreenBufferInfoProc.Call(handle, uintptr(unsafe.Pointer(&info)), 0))
+	if err != nil {
 		return nil, err
 	}
-
-	return &CONSOLE_SCREEN_BUFFER_INFO{
-		Size:              COORD(info.Size),
-		CursorPosition:    COORD(info.CursorPosition),
-		Attributes:        info.Attributes,
-		Window:            SMALL_RECT(info.Window),
-		MaximumWindowSize: COORD(info.MaximumWindowSize),
-	}, nil
+	return &info, nil
 }
 
 func ScrollConsoleScreenBuffer(handle uintptr, scrollRect SMALL_RECT, clipRect SMALL_RECT, destOrigin COORD, char CHAR_INFO) error {
 	r1, r2, err := scrollConsoleScreenBufferProc.Call(handle, uintptr(unsafe.Pointer(&scrollRect)), uintptr(unsafe.Pointer(&clipRect)), coordToPointer(destOrigin), uintptr(unsafe.Pointer(&char)))
-	runtime.KeepAlive(scrollRect)
-	runtime.KeepAlive(clipRect)
-	runtime.KeepAlive(destOrigin)
-	runtime.KeepAlive(char)
+	use(scrollRect)
+	use(clipRect)
+	use(destOrigin)
+	use(char)
 	return checkError(r1, r2, err)
 }
 
@@ -239,7 +233,7 @@ func ScrollConsoleScreenBuffer(handle uintptr, scrollRect SMALL_RECT, clipRect S
 // See https://msdn.microsoft.com/en-us/library/windows/desktop/ms686044(v=vs.85).aspx.
 func SetConsoleScreenBufferSize(handle uintptr, coord COORD) error {
 	r1, r2, err := setConsoleScreenBufferSizeProc.Call(handle, coordToPointer(coord))
-	runtime.KeepAlive(coord)
+	use(coord)
 	return checkError(r1, r2, err)
 }
 
@@ -248,7 +242,7 @@ func SetConsoleScreenBufferSize(handle uintptr, coord COORD) error {
 // See http://msdn.microsoft.com/en-us/library/windows/desktop/ms686047(v=vs.85).aspx.
 func SetConsoleTextAttribute(handle uintptr, attribute uint16) error {
 	r1, r2, err := setConsoleTextAttributeProc.Call(handle, uintptr(attribute), 0)
-	runtime.KeepAlive(attribute)
+	use(attribute)
 	return checkError(r1, r2, err)
 }
 
@@ -257,8 +251,8 @@ func SetConsoleTextAttribute(handle uintptr, attribute uint16) error {
 // See https://msdn.microsoft.com/en-us/library/windows/desktop/ms686125(v=vs.85).aspx.
 func SetConsoleWindowInfo(handle uintptr, isAbsolute bool, rect SMALL_RECT) error {
 	r1, r2, err := setConsoleWindowInfoProc.Call(handle, uintptr(boolToBOOL(isAbsolute)), uintptr(unsafe.Pointer(&rect)))
-	runtime.KeepAlive(isAbsolute)
-	runtime.KeepAlive(rect)
+	use(isAbsolute)
+	use(rect)
 	return checkError(r1, r2, err)
 }
 
@@ -266,9 +260,9 @@ func SetConsoleWindowInfo(handle uintptr, isAbsolute bool, rect SMALL_RECT) erro
 // See https://msdn.microsoft.com/en-us/library/windows/desktop/ms687404(v=vs.85).aspx.
 func WriteConsoleOutput(handle uintptr, buffer []CHAR_INFO, bufferSize COORD, bufferCoord COORD, writeRegion *SMALL_RECT) error {
 	r1, r2, err := writeConsoleOutputProc.Call(handle, uintptr(unsafe.Pointer(&buffer[0])), coordToPointer(bufferSize), coordToPointer(bufferCoord), uintptr(unsafe.Pointer(writeRegion)))
-	runtime.KeepAlive(buffer)
-	runtime.KeepAlive(bufferSize)
-	runtime.KeepAlive(bufferCoord)
+	use(buffer)
+	use(bufferSize)
+	use(bufferCoord)
 	return checkError(r1, r2, err)
 }
 
@@ -276,7 +270,7 @@ func WriteConsoleOutput(handle uintptr, buffer []CHAR_INFO, bufferSize COORD, bu
 // See https://msdn.microsoft.com/en-us/library/windows/desktop/ms684961(v=vs.85).aspx.
 func ReadConsoleInput(handle uintptr, buffer []INPUT_RECORD, count *uint32) error {
 	r1, r2, err := readConsoleInputProc.Call(handle, uintptr(unsafe.Pointer(&buffer[0])), uintptr(len(buffer)), uintptr(unsafe.Pointer(count)))
-	runtime.KeepAlive(buffer)
+	use(buffer)
 	return checkError(r1, r2, err)
 }
 
@@ -284,19 +278,15 @@ func ReadConsoleInput(handle uintptr, buffer []INPUT_RECORD, count *uint32) erro
 // It returns true if the handle was signaled; false otherwise.
 // See https://msdn.microsoft.com/en-us/library/windows/desktop/ms687032(v=vs.85).aspx.
 func WaitForSingleObject(handle uintptr, msWait uint32) (bool, error) {
-	event, err := windows.WaitForSingleObject(windows.Handle(handle), msWait)
-	if err != nil {
-		return false, err
-	}
-
-	switch event {
-	case windows.WAIT_ABANDONED, uint32(windows.WAIT_TIMEOUT):
+	r1, _, err := waitForSingleObjectProc.Call(handle, uintptr(uint32(msWait)))
+	switch r1 {
+	case WAIT_ABANDONED, WAIT_TIMEOUT:
 		return false, nil
-	case windows.WAIT_OBJECT_0:
+	case WAIT_SIGNALED:
 		return true, nil
-	default:
-		return false, nil
 	}
+	use(msWait)
+	return false, err
 }
 
 // String helpers
@@ -331,3 +321,7 @@ func coordToPointer(c COORD) uintptr {
 	// Note: This code assumes the two SHORTs are correctly laid out; the "cast" to uint32 is just to get a pointer to pass.
 	return uintptr(*((*uint32)(unsafe.Pointer(&c))))
 }
+
+// use is a no-op, but the compiler cannot see that it is.
+// Calling use(p) ensures that p is kept live until that point.
+func use(p interface{}) {}

vendor/github.com/Azure/go-ansiterm/winterm/attr_translation.go

@@ -1,4 +1,4 @@
-//go:build windows
+// +build windows
 
 package winterm
 

vendor/github.com/Azure/go-ansiterm/winterm/cursor_helpers.go

@@ -1,12 +1,10 @@
-//go:build windows
+// +build windows
 
 package winterm
 
 const (
 	horizontal = iota
 	vertical
-	line
-	column
 )
 
 func (h *windowsAnsiEventHandler) getCursorWindow(info *CONSOLE_SCREEN_BUFFER_INFO) SMALL_RECT {
@@ -60,20 +58,44 @@ func (h *windowsAnsiEventHandler) moveCursor(moveMode int, param int) error {
 		position.X += int16(param)
 	case vertical:
 		position.Y += int16(param)
-	case line:
-		position.X = 0
-		position.Y += int16(param)
-	case column:
-		position.X = int16(param) - 1
 	}
 
-	return h.setCursorPosition(position, h.getCursorWindow(info))
+	if err = h.setCursorPosition(position, h.getCursorWindow(info)); err != nil {
+		return err
+	}
+
+	return nil
 }
 
 func (h *windowsAnsiEventHandler) moveCursorLine(param int) error {
-	return h.moveCursor(line, param)
+	info, err := GetConsoleScreenBufferInfo(h.fd)
+	if err != nil {
+		return err
+	}
+
+	position := info.CursorPosition
+	position.X = 0
+	position.Y += int16(param)
+
+	if err = h.setCursorPosition(position, h.getCursorWindow(info)); err != nil {
+		return err
+	}
+
+	return nil
 }
 
 func (h *windowsAnsiEventHandler) moveCursorColumn(param int) error {
-	return h.moveCursor(column, param)
+	info, err := GetConsoleScreenBufferInfo(h.fd)
+	if err != nil {
+		return err
+	}
+
+	position := info.CursorPosition
+	position.X = int16(param) - 1
+
+	if err = h.setCursorPosition(position, h.getCursorWindow(info)); err != nil {
+		return err
+	}
+
+	return nil
 }

vendor/github.com/Azure/go-ansiterm/winterm/erase_helpers.go

@@ -1,4 +1,4 @@
-//go:build windows
+// +build windows
 
 package winterm
 
@@ -50,7 +50,12 @@ func (h *windowsAnsiEventHandler) clearRange(attributes uint16, fromCoord COORD,
 	coordStart.X, coordStart.Y = xCurrent, yCurrent
 	coordEnd.X, coordEnd.Y = xEnd, yEnd
 
-	return h.clearRect(attributes, coordStart, coordEnd)
+	err = h.clearRect(attributes, coordStart, coordEnd)
+	if err != nil {
+		return err
+	}
+
+	return nil
 }
 
 func (h *windowsAnsiEventHandler) clearRect(attributes uint16, fromCoord COORD, toCoord COORD) error {
@@ -70,5 +75,10 @@ func (h *windowsAnsiEventHandler) clearRect(attributes uint16, fromCoord COORD,
 		buffer[i] = char
 	}
 
-	return WriteConsoleOutput(h.fd, buffer, COORD{X: width, Y: height}, COORD{X: 0, Y: 0}, &region)
+	err := WriteConsoleOutput(h.fd, buffer, COORD{X: width, Y: height}, COORD{X: 0, Y: 0}, &region)
+	if err != nil {
+		return err
+	}
+
+	return nil
 }

vendor/github.com/Azure/go-ansiterm/winterm/scroll_helper.go

@@ -1,4 +1,4 @@
-//go:build windows
+// +build windows
 
 package winterm
 
@@ -39,8 +39,9 @@ func (h *windowsAnsiEventHandler) deleteLines(param int) error {
 	if start >= sr.top && start <= sr.bottom {
 		sr.top = start
 		return h.scroll(param, sr, info)
+	} else {
+		return nil
 	}
-	return nil
 }
 
 func (h *windowsAnsiEventHandler) insertLines(param int) error {
@@ -71,7 +72,10 @@ func (h *windowsAnsiEventHandler) scroll(param int, sr scrollRegion, info *CONSO
 		Attributes:  h.attributes,
 	}
 
-	return ScrollConsoleScreenBuffer(h.fd, scrollRect, scrollRect, destOrigin, char)
+	if err := ScrollConsoleScreenBuffer(h.fd, scrollRect, scrollRect, destOrigin, char); err != nil {
+		return err
+	}
+	return nil
 }
 
 func (h *windowsAnsiEventHandler) deleteCharacters(param int) error {
@@ -107,5 +111,8 @@ func (h *windowsAnsiEventHandler) scrollLine(columns int, position COORD, info *
 		Attributes:  h.attributes,
 	}
 
-	return ScrollConsoleScreenBuffer(h.fd, scrollRect, scrollRect, destOrigin, char)
+	if err := ScrollConsoleScreenBuffer(h.fd, scrollRect, scrollRect, destOrigin, char); err != nil {
+		return err
+	}
+	return nil
 }

vendor/github.com/Azure/go-ansiterm/winterm/utilities.go

@@ -1,4 +1,4 @@
-//go:build windows
+// +build windows
 
 package winterm
 

vendor/github.com/Azure/go-ansiterm/winterm/win_event_handler.go

@@ -1,4 +1,4 @@
-//go:build windows
+// +build windows
 
 package winterm
 
@@ -169,7 +169,9 @@ func (h *windowsAnsiEventHandler) executeLF() error {
 				return err
 			}
 			h.logf("Resetting cursor position for LF without CR")
-			return SetConsoleCursorPosition(h.fd, pos)
+			if err := SetConsoleCursorPosition(h.fd, pos); err != nil {
+				return err
+			}
 		}
 	}
 	return nil
@@ -371,7 +373,7 @@ func (h *windowsAnsiEventHandler) CUP(row int, col int) error {
 	}
 
 	window := h.getCursorWindow(info)
-	position := COORD{X: window.Left + int16(col) - 1, Y: window.Top + int16(row) - 1}
+	position := COORD{window.Left + int16(col) - 1, window.Top + int16(row) - 1}
 	return h.setCursorPosition(position, window)
 }
 
@@ -421,7 +423,7 @@ func (h *windowsAnsiEventHandler) DECCOLM(use132 bool) error {
 		targetWidth = 132
 	}
 	if info.Size.X < targetWidth {
-		if err := SetConsoleScreenBufferSize(h.fd, COORD{X: targetWidth, Y: info.Size.Y}); err != nil {
+		if err := SetConsoleScreenBufferSize(h.fd, COORD{targetWidth, info.Size.Y}); err != nil {
 			h.logf("set buffer failed: %v", err)
 			return err
 		}
@@ -434,12 +436,12 @@ func (h *windowsAnsiEventHandler) DECCOLM(use132 bool) error {
 		return err
 	}
 	if info.Size.X > targetWidth {
-		if err := SetConsoleScreenBufferSize(h.fd, COORD{X: targetWidth, Y: info.Size.Y}); err != nil {
+		if err := SetConsoleScreenBufferSize(h.fd, COORD{targetWidth, info.Size.Y}); err != nil {
 			h.logf("set buffer failed: %v", err)
 			return err
 		}
 	}
-	return SetConsoleCursorPosition(h.fd, COORD{X: 0, Y: 0})
+	return SetConsoleCursorPosition(h.fd, COORD{0, 0})
 }
 
 func (h *windowsAnsiEventHandler) ED(param int) error {
@@ -466,15 +468,15 @@ func (h *windowsAnsiEventHandler) ED(param int) error {
 	switch param {
 	case 0:
 		start = info.CursorPosition
-		end = COORD{X: info.Size.X - 1, Y: info.Size.Y - 1}
+		end = COORD{info.Size.X - 1, info.Size.Y - 1}
 
 	case 1:
-		start = COORD{X: 0, Y: 0}
+		start = COORD{0, 0}
 		end = info.CursorPosition
 
 	case 2:
-		start = COORD{X: 0, Y: 0}
-		end = COORD{X: info.Size.X - 1, Y: info.Size.Y - 1}
+		start = COORD{0, 0}
+		end = COORD{info.Size.X - 1, info.Size.Y - 1}
 	}
 
 	err = h.clearRange(h.attributes, start, end)
@@ -493,7 +495,9 @@ func (h *windowsAnsiEventHandler) ED(param int) error {
 		if err := SetConsoleCursorPosition(h.fd, pos); err != nil {
 			return err
 		}
-		return SetConsoleWindowInfo(h.fd, true, window)
+		if err := SetConsoleWindowInfo(h.fd, true, window); err != nil {
+			return err
+		}
 	}
 
 	return nil
@@ -521,18 +525,23 @@ func (h *windowsAnsiEventHandler) EL(param int) error {
 	switch param {
 	case 0:
 		start = info.CursorPosition
-		end = COORD{X: info.Size.X, Y: info.CursorPosition.Y}
+		end = COORD{info.Size.X, info.CursorPosition.Y}
 
 	case 1:
-		start = COORD{X: 0, Y: info.CursorPosition.Y}
+		start = COORD{0, info.CursorPosition.Y}
 		end = info.CursorPosition
 
 	case 2:
-		start = COORD{X: 0, Y: info.CursorPosition.Y}
-		end = COORD{X: info.Size.X, Y: info.CursorPosition.Y}
+		start = COORD{0, info.CursorPosition.Y}
+		end = COORD{info.Size.X, info.CursorPosition.Y}
 	}
 
-	return h.clearRange(h.attributes, start, end)
+	err = h.clearRange(h.attributes, start, end)
+	if err != nil {
+		return err
+	}
+
+	return nil
 }
 
 func (h *windowsAnsiEventHandler) IL(param int) error {
@@ -602,7 +611,12 @@ func (h *windowsAnsiEventHandler) SGR(params []int) error {
 	if h.inverted {
 		attributes = invertAttributes(attributes)
 	}
-	return SetConsoleTextAttribute(h.fd, attributes)
+	err := SetConsoleTextAttribute(h.fd, attributes)
+	if err != nil {
+		return err
+	}
+
+	return nil
 }
 
 func (h *windowsAnsiEventHandler) SU(param int) error {
@@ -688,8 +702,8 @@ func (h *windowsAnsiEventHandler) Flush() error {
 		}
 
 		charInfo := []CHAR_INFO{{UnicodeChar: uint16(h.marginByte), Attributes: info.Attributes}}
-		size := COORD{X: 1, Y: 1}
-		position := COORD{X: 0, Y: 0}
+		size := COORD{1, 1}
+		position := COORD{0, 0}
 		region := SMALL_RECT{Left: info.CursorPosition.X, Top: info.CursorPosition.Y, Right: info.CursorPosition.X, Bottom: info.CursorPosition.Y}
 		if err := WriteConsoleOutput(h.fd, charInfo, size, position, &region); err != nil {
 			return err

vendor/github.com/go-jose/go-jose/v4/crypter.go

@@ -408,10 +408,7 @@ func (ctx *genericEncrypter) EncryptWithAuthData(plaintext, aad []byte) (*JSONWe
 		(*obj.protected)[k] = makeRawMessage(b)
 	}
 
-	authData, err := obj.computeAuthData()
-	if err != nil {
-		return nil, err
-	}
+	authData := obj.computeAuthData()
 	parts, err := ctx.cipher.encrypt(cek, authData, plaintext)
 	if err != nil {
 		return nil, err
@@ -431,13 +428,6 @@ func (ctx *genericEncrypter) Options() EncrypterOptions {
 	}
 }
 
-func validateContentEncryptionKeySize(cek []byte, cipher contentCipher) error {
-	if len(cek) != cipher.keySize() {
-		return ErrInvalidKeySize
-	}
-	return nil
-}
-
 // Decrypt and validate the object and return the plaintext. This
 // function does not support multi-recipient. If you desire multi-recipient
 // decryption use DecryptMulti instead.
@@ -495,10 +485,7 @@ func (obj JSONWebEncryption) Decrypt(decryptionKey interface{}) ([]byte, error)
 		tag:        obj.tag,
 	}
 
-	authData, err := obj.computeAuthData()
-	if err != nil {
-		return nil, err
-	}
+	authData := obj.computeAuthData()
 
 	var plaintext []byte
 	recipient := obj.recipients[0]
@@ -508,10 +495,6 @@ func (obj JSONWebEncryption) Decrypt(decryptionKey interface{}) ([]byte, error)
 	if err != nil {
 		return nil, ErrCryptoFailure
 	}
-	err = validateContentEncryptionKeySize(cek, cipher)
-	if err != nil {
-		return nil, ErrCryptoFailure
-	}
 
 	// Found a valid CEK -- let's try to decrypt.
 	plaintext, err = cipher.decrypt(cek, authData, parts)
@@ -537,12 +520,6 @@ func (obj JSONWebEncryption) Decrypt(decryptionKey interface{}) ([]byte, error)
 //
 // Automatically decompresses plaintext, but returns an error if the decompressed
 // data would be >250kB or >3x the size of the compressed data, whichever is larger.
-//
-// Calling DecryptMulti() with PBES2 enabled can result in excessive CPU work.
-// The PBES2 key unwrapping algorithms are intentionally expensive, and have to
-// be run for each recipient. To be safe: don't allow PBES2 algorithms in calls
-// to ParseEncrypted / ParseEncryptedJSON. If your application requires PBES2,
-// prefer Decrypt(), which will only process single-recipient messages.
 func (obj JSONWebEncryption) DecryptMulti(decryptionKey interface{}) (int, Header, []byte, error) {
 	globalHeaders := obj.mergedHeaders(nil)
 
@@ -576,10 +553,7 @@ func (obj JSONWebEncryption) DecryptMulti(decryptionKey interface{}) (int, Heade
 		tag:        obj.tag,
 	}
 
-	authData, err := obj.computeAuthData()
-	if err != nil {
-		return -1, Header{}, nil, err
-	}
+	authData := obj.computeAuthData()
 
 	index := -1
 	var plaintext []byte
@@ -598,10 +572,6 @@ func (obj JSONWebEncryption) DecryptMulti(decryptionKey interface{}) (int, Heade
 		if err != nil {
 			continue
 		}
-		err = validateContentEncryptionKeySize(cek, cipher)
-		if err != nil {
-			continue
-		}
 
 		// Found a valid CEK -- let's try to decrypt.
 		plaintext, err = cipher.decrypt(cek, authData, parts)

vendor/github.com/go-jose/go-jose/v4/encoding.go

@@ -30,6 +30,30 @@ import (
 	"github.com/go-jose/go-jose/v4/json"
 )
 
+// Helper function to serialize known-good objects.
+// Precondition: value is not a nil pointer.
+func mustSerializeJSON(value interface{}) []byte {
+	out, err := json.Marshal(value)
+	if err != nil {
+		panic(err)
+	}
+	// We never want to serialize the top-level value "null," since it's not a
+	// valid JOSE message. But if a caller passes in a nil pointer to this method,
+	// MarshalJSON will happily serialize it as the top-level value "null". If
+	// that value is then embedded in another operation, for instance by being
+	// base64-encoded and fed as input to a signing algorithm
+	// (https://github.com/go-jose/go-jose/issues/22), the result will be
+	// incorrect. Because this method is intended for known-good objects, and a nil
+	// pointer is not a known-good object, we are free to panic in this case.
+	// Note: It's not possible to directly check whether the data pointed at by an
+	// interface is a nil pointer, so we do this hacky workaround.
+	// https://groups.google.com/forum/#!topic/golang-nuts/wnH302gBa4I
+	if string(out) == "null" {
+		panic("Tried to serialize a nil pointer.")
+	}
+	return out
+}
+
 // Strip all newlines and whitespace
 func stripWhitespace(data string) string {
 	buf := strings.Builder{}
@@ -98,8 +122,6 @@ func inflate(input []byte) ([]byte, error) {
 }
 
 // byteBuffer represents a slice of bytes that can be serialized to url-safe base64.
-//
-// A nil byteBuffer represents an empty slice of bytes.
 type byteBuffer struct {
 	data []byte
 }
@@ -147,13 +169,13 @@ func (b *byteBuffer) UnmarshalJSON(data []byte) error {
 		return err
 	}
 
-	b.data = decoded
+	*b = *newBuffer(decoded)
 
 	return nil
 }
 
 func (b *byteBuffer) base64() string {
-	return base64.RawURLEncoding.EncodeToString(b.bytes())
+	return base64.RawURLEncoding.EncodeToString(b.data)
 }
 
 func (b *byteBuffer) bytes() []byte {
@@ -164,8 +186,12 @@ func (b *byteBuffer) bytes() []byte {
 	return b.data
 }
 
-func (b *byteBuffer) bigInt() *big.Int {
-	return new(big.Int).SetBytes(b.bytes())
+func (b byteBuffer) bigInt() *big.Int {
+	return new(big.Int).SetBytes(b.data)
+}
+
+func (b byteBuffer) toInt() int {
+	return int(b.bigInt().Int64())
 }
 
 func base64EncodeLen(sl []byte) int {

vendor/github.com/go-jose/go-jose/v4/json/decode.go

@@ -671,19 +671,6 @@ func (d *decodeState) object(v reflect.Value) {
 				for _, i := range f.index {
 					if subv.Kind() == reflect.Ptr {
 						if subv.IsNil() {
-							// If a struct embeds a pointer to an unexported type,
-							// it is not possible to set a newly allocated value
-							// since the field is unexported.
-							//
-							// See https://golang.org/issue/21357
-							if !subv.CanSet() {
-								d.saveError(fmt.Errorf("json: cannot set embedded pointer to unexported struct: %v", subv.Type().Elem()))
-								// Invalidate subv to ensure d.value(subv) skips over
-								// the JSON value without assigning it to subv.
-								subv = reflect.Value{}
-								destring = false
-								break
-							}
 							subv.Set(reflect.New(subv.Type().Elem()))
 						}
 						subv = subv.Elem()

vendor/github.com/go-jose/go-jose/v4/json/encode.go

@@ -1025,19 +1025,7 @@ func typeFields(t reflect.Type) []field {
 			// Scan f.typ for fields to include.
 			for i := 0; i < f.typ.NumField(); i++ {
 				sf := f.typ.Field(i)
-				if sf.Anonymous {
-					t := sf.Type
-					if t.Kind() == reflect.Pointer {
-						t = t.Elem()
-					}
-					if !sf.IsExported() && t.Kind() != reflect.Struct {
-						// Ignore embedded fields of unexported non-struct types.
-						continue
-					}
-					// Do not ignore embedded fields of unexported struct types
-					// since they may have exported fields.
-				} else if !sf.IsExported() {
-					// Ignore unexported non-embedded fields.
+				if sf.PkgPath != "" && !sf.Anonymous { // unexported
 					continue
 				}
 				tag := sf.Tag.Get("json")

vendor/github.com/go-jose/go-jose/v4/jwe.go

@@ -25,12 +25,6 @@ import (
 	"github.com/go-jose/go-jose/v4/json"
 )
 
-// MaxRecipients is the maximum number of recipients of a JWE at parse time.
-// Higher values mean more potential work done across untrusted input.
-//
-// If modifying MaxRecipients, do it before any parsing occurs.
-var MaxRecipients = 32
-
 // rawJSONWebEncryption represents a raw JWE JSON object. Used for parsing/serializing.
 type rawJSONWebEncryption struct {
 	Protected    *byteBuffer        `json:"protected,omitempty"`
@@ -90,18 +84,14 @@ func (obj JSONWebEncryption) mergedHeaders(recipient *recipientInfo) rawHeader {
 }
 
 // Get the additional authenticated data from a JWE object.
-func (obj JSONWebEncryption) computeAuthData() ([]byte, error) {
+func (obj JSONWebEncryption) computeAuthData() []byte {
 	var protected string
 
 	switch {
 	case obj.original != nil && obj.original.Protected != nil:
 		protected = obj.original.Protected.base64()
 	case obj.protected != nil:
-		serializedProtected, err := json.Marshal(obj.protected)
-		if err != nil {
-			return nil, err
-		}
-		protected = base64.RawURLEncoding.EncodeToString(serializedProtected)
+		protected = base64.RawURLEncoding.EncodeToString(mustSerializeJSON((obj.protected)))
 	default:
 		protected = ""
 	}
@@ -112,7 +102,7 @@ func (obj JSONWebEncryption) computeAuthData() ([]byte, error) {
 		output = append(output, []byte(base64.RawURLEncoding.EncodeToString(obj.aad))...)
 	}
 
-	return output, nil
+	return output
 }
 
 func containsKeyAlgorithm(haystack []KeyAlgorithm, needle KeyAlgorithm) bool {
@@ -138,10 +128,11 @@ func containsContentEncryption(haystack []ContentEncryption, needle ContentEncry
 // https://datatracker.ietf.org/doc/html/rfc7516#section-3.1
 // https://datatracker.ietf.org/doc/html/rfc7516#section-3.2
 //
-// The keyAlgorithms and contentEncryption parameters contain the allowable algorithms in the "alg" and "enc"
-// header parameters respectively. They must be non-empty. Non-matching algorithms cause a parse error.
-//
-// Deprecated: use ParseEncryptedJSON or ParseEncryptedCompact depending on which serialization you expect.
+// The keyAlgorithms and contentEncryption parameters are used to validate the "alg" and "enc"
+// header parameters respectively. They must be nonempty, and each "alg" or "enc" header in
+// parsed data must contain a value that is present in the corresponding parameter. That
+// includes the protected and unprotected headers as well as all recipients. To accept
+// multiple algorithms, pass a slice of all the algorithms you want to accept.
 func ParseEncrypted(input string,
 	keyEncryptionAlgorithms []KeyAlgorithm,
 	contentEncryption []ContentEncryption,
@@ -154,13 +145,9 @@ func ParseEncrypted(input string,
 	return ParseEncryptedCompact(input, keyEncryptionAlgorithms, contentEncryption)
 }
 
-// ParseEncryptedJSON parses a message in JWE JSON Serialization. Messages with
-// more than [MaxRecipients] recipients are rejected.
+// ParseEncryptedJSON parses a message in JWE JSON Serialization.
 //
 // https://datatracker.ietf.org/doc/html/rfc7516#section-3.2
-//
-// The keyAlgorithms and contentEncryption parameters contain the allowable algorithms in the "alg" and "enc"
-// header parameters respectively. They must be non-empty. Any non-allowed algorithms will cause parsing to fail.
 func ParseEncryptedJSON(
 	input string,
 	keyEncryptionAlgorithms []KeyAlgorithm,
@@ -190,9 +177,6 @@ func (parsed *rawJSONWebEncryption) sanitized(
 	if len(contentEncryption) == 0 {
 		return nil, errors.New("go-jose/go-jose: no content encryption algorithms provided")
 	}
-	if len(parsed.Recipients) > MaxRecipients {
-		return nil, fmt.Errorf("go-jose/go-jose: too many recipients in JWE; maximum is %d", MaxRecipients)
-	}
 
 	obj := &JSONWebEncryption{
 		original:    parsed,
@@ -211,11 +195,21 @@ func (parsed *rawJSONWebEncryption) sanitized(
 		}
 	}
 
-	protected, err := parseProtectedHeader(parsed.Protected)
+	if parsed.Protected != nil && len(parsed.Protected.bytes()) > 0 {
+		err := json.Unmarshal(parsed.Protected.bytes(), &obj.protected)
+		if err != nil {
+			return nil, fmt.Errorf("go-jose/go-jose: invalid protected header: %s, %s", err, parsed.Protected.base64())
+		}
+	}
+
+	// Note: this must be called _after_ we parse the protected header,
+	// otherwise fields from the protected header will not get picked up.
+	var err error
+	mergedHeaders := obj.mergedHeaders(nil)
+	obj.Header, err = mergedHeaders.sanitized()
 	if err != nil {
-		return nil, err
+		return nil, fmt.Errorf("go-jose/go-jose: cannot sanitize merged headers: %v (%v)", err, mergedHeaders)
 	}
-	obj.protected = protected
 
 	if len(parsed.Recipients) == 0 {
 		obj.recipients = []recipientInfo{
@@ -270,14 +264,6 @@ func (parsed *rawJSONWebEncryption) sanitized(
 		}
 	}
 
-	// Note: this must be called _after_ we parse the protected header,
-	// otherwise fields from the protected header will not get picked up.
-	mergedHeaders := obj.mergedHeaders(nil)
-	obj.Header, err = mergedHeaders.sanitized()
-	if err != nil {
-		return nil, fmt.Errorf("go-jose/go-jose: cannot sanitize merged headers: %w", err)
-	}
-
 	obj.iv = parsed.Iv.bytes()
 	obj.ciphertext = parsed.Ciphertext.bytes()
 	obj.tag = parsed.Tag.bytes()
@@ -301,9 +287,6 @@ func validateAlgEnc(headers rawHeader, keyAlgorithms []KeyAlgorithm, contentEncr
 // ParseEncryptedCompact parses a message in JWE Compact Serialization.
 //
 // https://datatracker.ietf.org/doc/html/rfc7516#section-3.1
-//
-// The keyAlgorithms and contentEncryption parameters contain the allowable algorithms in the "alg" and "enc"
-// header parameters respectively. They must be non-empty. Any non-allowed algorithms will cause parsing to fail.
 func ParseEncryptedCompact(
 	input string,
 	keyAlgorithms []KeyAlgorithm,
@@ -371,10 +354,7 @@ func (obj JSONWebEncryption) CompactSerialize() (string, error) {
 		return "", ErrNotSupported
 	}
 
-	serializedProtected, err := json.Marshal(obj.protected)
-	if err != nil {
-		return "", err
-	}
+	serializedProtected := mustSerializeJSON(obj.protected)
 
 	return base64JoinWithDots(
 		serializedProtected,
@@ -386,13 +366,7 @@ func (obj JSONWebEncryption) CompactSerialize() (string, error) {
 }
 
 // FullSerialize serializes an object using the full JSON serialization format.
-//
-// It returns "" if obj cannot be serialized, for example if it has no recipients.
 func (obj JSONWebEncryption) FullSerialize() string {
-	if len(obj.recipients) == 0 {
-		return ""
-	}
-
 	raw := rawJSONWebEncryption{
 		Unprotected:  obj.unprotected,
 		Iv:           newBuffer(obj.iv),
@@ -418,16 +392,8 @@ func (obj JSONWebEncryption) FullSerialize() string {
 	}
 
 	if obj.protected != nil {
-		serializedProtected, err := json.Marshal(obj.protected)
-		if err != nil {
-			return ""
-		}
-		raw.Protected = newBuffer(serializedProtected)
+		raw.Protected = newBuffer(mustSerializeJSON(obj.protected))
 	}
 
-	out, err := json.Marshal(raw)
-	if err != nil {
-		return ""
-	}
-	return string(out)
+	return string(mustSerializeJSON(raw))
 }