* only include property key name in sensor name if it exists
* add endpoint to binary_sensor and sensor notification CC entities if > 0
* refactor to have helper method generate name
* change default behavior of generate_name
* return value for notification sensor when we can't find the state
* store generated name
* Do not require admin account for foscam cameras.
Foscam cameras require admin account for getting the MAC address,
requiring an admin account in the integration is not desirable as
an operator one is good enough (and a good practice).
Old entries using the MAC address as unique_id are migrated to the
new unique_id format so everything is consistent.
Also fixed unhandled invalid responses from the camera in the
config flow process.
* Make RTSP port configurable again as some cameras reports wrong port
* Remove periods from new log lines
* Set new Config Flow version to 2 and adjust the entity migration
* Create a proper error message for the InvalidResponse exception
* Change crafted unique_id to use entry_id in the entity
* Abort if same host and port is already configured
* Fix entry tracking to use entry_id instead of unique_id
* Remove unique_id from mocked config entry in tests
* MySensors: Add type annotations
Adds a bunch of type annotations that were created
while understanding the code.
* MySensors: Change GatewayId to string
In preparation for config flow.
The GatewayId used to be id(gateway).
With config flows, every gateway will have its own
ConfigEntry. Every ConfigEntry has a unique id.
Thus we would have two separate but one-to-one related ID systems.
This commit removes this unneeded duplication by using the id of the ConfigEntry
as GatewayId.
* MySensors: Add unique_id to all entities
This allows entities to work well with the frontend.
* MySensors: Add device_info to all entities
Entities belonging to the same node_id will now by grouped as a device.
* MySensors: clean up device.py a bit
* MySensors: Add config flow support
With this change the MySensors can be fully configured from the GUI.
Legacy configuration.yaml configs will be migrated by reading them once.
Note that custom node names are not migrated. Users will have to re-enter
the names in the front-end.
Since there is no straight-forward way to configure global settings,
all previously global settings are now per-gateway. These settings include:
- MQTT retain
- optimistic
- persistence enable
- MySensors version
When a MySensors integration is loaded, it works as follows:
1. __init__.async_setup_entry is called
2. for every platform, async_forward_entry_setup is called
3. the platform's async_setup_entry is called
4. __init__.setup_mysensors_platform is called
5. the entity's constructor (e.g. MySensorsCover) is called
6. the created entity is stored in a dict in the hass object
* MySensors: Fix linter errors
* MySensors: Remove unused import
* MySensors: Feedback from @MartinHjelmare
* MySensors: Multi-step config flow
* MySensors: More feedback
* MySensors: Move all storage in hass object under DOMAIN
The integration now stores everything under hass.data["mysensors"]
instead of using several top level keys.
* MySensors: await shutdown of gateway instead of creating a task
* MySensors: Rename Ethernet to TCP
* MySensors: Absolute imports and cosmetic changes
* MySensors: fix gw_stop
* MySensors: Allow user to specify persistence file
* MySensors: Nicer log message
* MySensors: Add lots of unit tests
* MySensors: Fix legacy import of persistence file name
Turns out tests help to find bugs :D
* MySensors: Improve test coverage
* MySensors: Use json persistence files by default
* MySensors: Code style improvements
* MySensors: Stop adding attributes to existing objects
This commit removes the extra attributes that were being
added to the gateway objects from pymysensors.
Most attributes were easy to remove, except for the gateway id.
The MySensorsDevice class needs the gateway id as it is part of its DevId
as well as the unique_id and device_info.
Most MySensorsDevices actually end up being Entities.
Entities have access to their ConfigEntry via self.platform.config_entry.
However, the device_tracker platform does not become an Entity.
For this reason, the gateway id is not fetched from self.plaform but
given as an argument.
Additionally, MySensorsDevices expose the address of the gateway
(CONF_DEVICE). Entities can easily fetch this information via self.platform,
but the device_tracker cannot. This commit chooses to remove the gateway
address from device_tracker. While this could in theory break some automations,
the simplicity of this solution was deemed worth it.
The alternative of adding the entire ConfigEntry as an argument to MySensorsDevices
is not viable, because device_tracker is initialized by the async_setup_scanner function
that isn't supplied a ConfigEntry. It only gets discovery_info.
Adding the entire ConfigEntry doesn't seem appropriate for this edge case.
* MySensors: Fix gw_stop and the translations
* MySensors: Fix incorrect function calls
* MySensors: Fewer comments in const.py
* MySensors: Remove union from _get_gateway and remove id from try_connect
* MySensors: Deprecate nodes option in configuration.yaml
* MySensors: Use version parser from packaging
* MySensors: Remove prefix from unique_id and change some private property names
* MySensors: Change _get_gateway function signature
* MySensors: add packaging==20.8 for the version parser
* MySensors: Rename some stuff
* MySensors: use pytest.mark.parametrize
* MySensors: Clean up test cases
* MySensors: Remove unneeded parameter from devices
* Revert "MySensors: add packaging==20.8 for the version parser"
This reverts commit 6b200ee01a.
* MySensors: Use core interface for testing configuration.yaml import
* MySensors: Fix test_init
* MySensors: Rename a few variables
* MySensors: cosmetic changes
* MySensors: Update strings.json
* MySensors: Still more feedback from @MartinHjelmare
* MySensors: Remove unused strings
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* MySensors: Fix typo and remove another unused string
* MySensors: More strings.json
* MySensors: Fix gateway ready handler
* MySensors: Add duplicate detection to config flows
* MySensors: Deal with non-existing topics and ports.
Includes unit tests for these cases.
* MySensors: Use awesomeversion instead of packaging
* Add string already_configured
* MySensors: Abort config flow when config is found to be invalid while importing
* MySensors: Copy all error messages to also be abort messages
All error strings may now also be used as an abort reason,
so the strings should be defined
* Use string references
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Fix issue with control of cover when the target value is Up/Down instead of Open/Close
* Adjust open/close/stop cover control to account for no Open/Up or Close/Down targets
* Revert back to using values of 0/99 to close/open a cover since it is supported by all covers
* Replace RELEASE_BUTTON with False and remove unused PRESS_BUTTON in zwave_js cover
* Fix homekit options not being prefilled
When changing homekit options, the existing ones
were not being prefilled on the form.
* hide camera screen if no cameras
Fix "ConnectionResetError: Cannot write to closing transport" error we can have on lots of chinese cams(like Goke GK7102 based IP cameras)
Those non full onvif compliant cams can "crash" when calling non implemented functions like events or ptz and they are likely react by closing transport, leaving the request in a uncatched error state.
My camera used to fail on setup, and now it run nicely with that simple fix.
* Convert ozw climate values to correct units
* Remove debugger logging
* Fix black code formatting
* Remove extra spaces
* Add method descriptions and change to use setpoint
* Fix build and respond to comments
* Remove self from convert_units call
* Move method to top
* Move method outside class
* Add blank lines
* Fix test to use farenheit
* Update another value to farenheit
* Change to celsius
* Another test fix
* test fix
* Fix a value
* missed one
* Add unit test for convert_units
* fix unit test import
* Add new line to end of test file
* fix convert units import
* Reorder imports
* Grab const from different import
Co-authored-by: Trevor <tboyce021@gmail.com>
* Enable setting XY color and transition time by client
* New test for setting XY color value
* Correct block outdent
* New test for setting transition time value
* Fixed commented out code
Raman GuptaandGitHub
Franck NijhofandGitHub
Robert SvenssonandGitHub
Sergio Conde GómezandGitHub
Marc MuellerandGitHub
Johan NenzénandGitHub
Jaroslav HanslíkandGitHub
tkdrobandGitHub
Greg DowlingandGitHub
Yuval AboulafiaandGitHub
Aaron BachandGitHub
Nathan SpencerandGitHub
J. Nick KostonandGitHub
obelix05andGitHub
HomeAssistant Azure
Fabian AffolterandGitHub
Joakim SørensenandGitHub
Martin WeineltandGitHub
Maciej BieniekandGitHub
Shay LevyandGitHub
olijouveandGitHub
denes44andGitHub
Philip AllgaierandGitHub