Issue #78: Add all the cards from Issue #25 to the site boards section.

2026-08-24 10:14:22 -05:00 · 2021-02-20 00:29:43 -06:00
parent 0c4e3dac08
commit 339cf0dc86
47 changed files with 271 additions and 26 deletions
@@ -0,0 +1,11 @@
+---
+layout: board
+title: "Blinkinlabs Raspberry Router"
+short_description: A four-port 1 Gbps router designed around the CM4.
+status: prototype
+picture: "/images/board-blinkinlabs-raspberry-router.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-761726145"
+link: https://twitter.com/cibomahto/status/1350231642422579200
+videos: []
+---
+This is a router design based around a Compute Module 4, and it uses a [KSZ9897 switch](https://www.microchip.com/wwwproducts/en/KSZ9897) and a [LAN7431 PCIe-to-Ethernet adapter](https://www.microchip.com/wwwproducts/en/LAN7431).
@@ -0,0 +1,12 @@
+---
+layout: board
+title: "CM4 Handheld Gaming Device by juckettd"
+short_description: A Nintendo Wii U-sized portable gaming device.
+status: prototype
+picture: "/images/board-cm4-handheld-juckettd.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-755448284"
+link: https://github.com/juckettd/RaspberryPiCM4Handheld7Inch
+videos:
+  - https://www.youtube.com/watch?v=w9giSg6ORMk
+---
+This gaming handheld uses a CM4 to power the Retropie operating system and the official Rasperry Pi 7" screen. It is largely based on the CM4 IO carrier board but includes a Teensy LC board, Power Circuit, and Audio Circuit for enchanced functionality.
@@ -1,6 +1,7 @@
 ---
 layout: board
 title: "CM4 MATX"
+short_description: An open hardware micro-ATX motherboard for the CM4.
 status: prototype
 picture: "/images/board-cm4-matx.png"
 github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issue-743990222"
@@ -0,0 +1,12 @@
+---
+layout: board
+title: "CM4 SATA NAS by mebs_t"
+short_description: A small NAS carrier board for 2 SATA drives.
+status: prototype
+picture: "/images/board-cm4-nas-mebs-t.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-735413816"
+link: https://github.com/mebs/CM4-NAS/
+videos:
+  - https://www.youtube.com/watch?v=4vSGl5kpf-k
+---
+This Compute Module 4 carrier board design exposes a subset of the CM4's interfaces, including its single PCIe gen 2 lane to accept an external SATA controller card. This design is based off of the official Raspberry Pi Foundation's CM4 IO board (the KiCad project is available on the [IO board official page](https://www.raspberrypi.org/products/compute-module-4-io-board/?resellerType=home)). Removed the IO that was less relevant for a NAS and rearranged the remaining interfaces for a smaller footprint that would fit within the width of a standard 3.5" hard drive.
@@ -1,6 +1,7 @@
 ---
 layout: board
 title: "Raspberry Pi Compute Module 4 IO Board"
+short_description: The official CM4 IO Board.
 status: production
 picture: "/images/board-compute-module-4-io-board.jpg"
 github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices"
@@ -0,0 +1,14 @@
+---
+layout: board
+title: "CutiePie Tablet"
+short_description: A CM4-based touchscreen tablet with a handle.
+status: prototype
+picture: "/images/board-cutiepie-tablet.png"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-744026463"
+link: https://cutiepi.io
+videos:
+  - https://www.youtube.com/watch?v=w9giSg6ORMk
+---
+CutiePi is an ultra portable Raspberry Pi creation kit, in a tablet form factor. Liberate your Pi project from the desk, and start creating wherever an idea strikes you.
+
+At the heart of CutiePi is our custom PCB, the CutiePi board. This Raspberry Pi Compute Module 4 compatible carrier board comes with features for portable use, and is a proud OSHWA-certified open source hardware.
@@ -1,6 +1,7 @@
 ---
 layout: board
 title: "Gumstix Raspberry Pi CM4 Development Board"
+short_description: A compact IO Board with an M.2 slot.
 status: prototype
 picture: "/images/board-gumstix-cm4-dev-board.jpg"
 github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-731269090"
@@ -0,0 +1,12 @@
+---
+layout: board
+title: "Harlab's CM4 Nano"
+short_description: A tiny, feature-packed 'backpack' board for the CM4.
+status: prototype
+picture: "/images/board-harlab-cm4-nano.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-755777945"
+link: https://github.com/harlab/CM4Ext_Nano
+videos:
+  - https://www.youtube.com/watch?v=w9giSg6ORMk
+---
+CM4Ext Nano is the world's smallest baseboard for Raspberry Pi Compute Module 4. Measuring only 55x40mm, it brings power of Raspberry Pi 4 to a slightly bigger footprint that Raspberry Pi Zero. It's compatible with all Compute Modules 4 boards, including eMMC and no eMMC versions.
@@ -0,0 +1,12 @@
+---
+layout: board
+title: "MCUzone CM4 4G"
+short_description: A carrier built around 4G or 5G connectivity.
+status: prototype
+picture: "/images/board-mcuzone-cm4-4g.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-745730511"
+link: https://m.weibo.cn/detail/4577659583463712
+videos:
+  - https://www.youtube.com/watch?v=w9giSg6ORMk
+---
+The board as pictured has "4K HDMI output, Gigabit wired Ethernet, 4G LTE Cat4 network, dual USB host, and USB-C power supply interface."
@@ -0,0 +1,11 @@
+---
+layout: board
+title: "Minimal RPi CM4 Carrier Board by dronecz"
+short_description: The smallest and simplest CM4 carrier board.
+status: prototype
+picture: "/images/board-minimal-rpi-cm4-carrier-board.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-761578079"
+link: https://twitter.com/dronecz/status/1333930283192770560?s=20
+videos: []
+---
+The most minimal USB-C powered CM4 carrier board yet. It only features a single USB 2.0 port, a single HDMI port, a USB-C power plug, and a microSD card slot. Very tiny.
@@ -0,0 +1,12 @@
+---
+layout: board
+title: "CM4 NAS Mini PCIe by olvint"
+short_description: Based on mebs_t's board, this NAS uses Mini PCIe.
+status: prototype
+picture: "/images/board-olvint-cm4-nas-minipcie.png"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-751530864"
+link: https://github.com/olvint/CM4-NAS-MiniPCIE
+videos:
+  - https://www.youtube.com/watch?v=w9giSg6ORMk
+---
+Main purpose of design is to make NAS with more reliable SATA connection comparing to USB-to-SATA converters. SATA controllers can be connected through MiniPCIe slot. There are variety of cards in market, mainly the intent was to use this for 2 SATA drives. This is half size card. Cards for 4 SATA with RAID controller also can be connected.
@@ -0,0 +1,14 @@
+---
+layout: board
+title: "Over:Board Mini ITX motherboard"
+short_description: A Mini ITX motherboard for the Compute Module 4.
+status: prototype
+picture: "/images/board-over-board-mini-itx.png"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-755010656"
+link: https://www.indiegogo.com/projects/over-board-raspberry-pi-4-mini-itx-motherboard/
+videos:
+  - https://www.youtube.com/watch?v=w9giSg6ORMk
+---
+In addition to the standard Raspberry Pi interfaces found on the various standard models and the Compute Module I/O board, the Over:Board offers a full-size PCI-Express slot (but still just the 1x single-lane PCI-E v2.0 bus), a 24-pin ATX power header, Real-Time Clock with backup battery, RS232 (DB9) COM port, USB 2.0 4-port hub with two physical ports, USB Audio IC with Line-out and Mic-in, and a USB SATA controller for HDD/SSD storage.
+
+I've kept the PCI-Express lane clear to the slot for full performance expansion cards and offer the additional functionality using the USB 2.0 bus which gives minimal functionality without compromising expandability.
@@ -1,6 +1,7 @@
 ---
 layout: board
 title: "PiKeeb - Open Source Digital Typewriter"
+short_description: All-in-one keyboard-enclosure-screen device.
 status: prototype
 picture: "/images/board-pikeeb.jpg"
 github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-734625905"
@@ -0,0 +1,13 @@
+---
+layout: board
+title: "Piunora - CM4 in Metro/Arduino form factor"
+short_description: M.2 underneath, Arduino-style connections up top.
+status: prototype
+picture: "/images/board-piunora-metro-ff-m2.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-742956897"
+link: https://twitter.com/timonsku/status/1337134272625467392
+videos:
+  - https://www.youtube.com/watch?v=4vSGl5kpf-k
+---
+A carrier for the Raspberry Pi CM4 in an Adafruit Metro/Arduino form-factor.
+It features full-size HDMI, USB-C (data+power), USB-A, M.2 (PCI-E), RGB LEDs, 6xADC, Button, camera connector and a Qwiic/Stemma QT.
@@ -0,0 +1,11 @@
+---
+layout: board
+title: "Retro Game Restore GPiMate Plus for CM4 Lite"
+short_description: A stylish way to integrate the CM4 into the Retroflag.
+status: production
+picture: "/images/board-retro-game-restore-gpimate-plus.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-762322754"
+link: http://retrogamerestore.com/gpimateplus/
+videos: []
+---
+The RgR GPiMate Plus adapter board integrates a Compute Module 4 into the [Retroflag GPi CASE](http://retroflag.com/GPi-CASE.html).
@@ -0,0 +1,11 @@
+---
+layout: board
+title: "Retro Lite CM4"
+short_description: Nintendo Switch-sized Raspberry Pi gaming handheld.
+status: prototype
+picture: "/images/board-retro-lite-cm4.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-775261566"
+link: https://bitbuilt.net/forums/index.php?threads/retro-lite-cm4-a-stonededge-and-dmcke5-collaboration.3934/
+videos: []
+---
+The Retro Lite CM4 is a sleek, handheld gaming console to be completed early 2021. It is a collaboration project between StonedEdge and Dmcke5 on the BitBuilt forums. It is modelled in SolidWorks and the PCBs were designed in EAGLE. The project is a work in progress, but we hope to have it all done very soon! Final shell will be done in 6061 aluminum.
@@ -0,0 +1,12 @@
+---
+layout: board
+title: "Seeed Studio Dual-GigE CM4 Routerboard"
+short_description: Two-port gigabit router with USB 3.
+status: prototype
+picture: "/images/board-seeed-dual-gig-cm4-routerboard.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-751566018"
+link: https://twitter.com/Nicho810/status/1337210218980118529
+videos:
+  - https://www.youtube.com/watch?v=w9giSg6ORMk
+---
+This board has two Gigabit ethernet ports, along with USB 3.0, and is barely larger than the CM4 itself!
@@ -1,6 +1,7 @@
 ---
 layout: board
 title: "Sourcekit PiTray mini"
+short_description: Inexpensive Raspberry Pi 4 model B form factor carrier.
 status: production
 picture: "/images/board-sourcekit-pitray-mini.jpg"
 github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issue-743990222"
@@ -1,6 +1,7 @@
 ---
 layout: board
 title: "StereoPi - DIY stereoscopic camera"
+short_description: Two cameras for steroscopic vision.
 status: prototype
 picture: "/images/board-stereopi-v2.jpg"
 github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-734928825"
@@ -0,0 +1,11 @@
+---
+layout: board
+title: "TinyCar CM4"
+short_description: Integrates two Google Coral TPUs in a tiny package.
+status: prototype
+picture: "/images/board-tinycar-cm4-markus-kasten.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-759723796"
+link: https://twitter.com/MarkusInABox/status/1347920396998344705
+videos: []
+---
+This is a 6-layer CM4 carrier board designed by Markus Kasten that directly integrates two Google Coral TPUs.
@@ -0,0 +1,11 @@
+---
+layout: board
+title: "TOFU Industrial CM4 Carrier"
+short_description: CM4 board meant for industrial applications.
+status: prototype
+picture: "/images/board-tofu-industrial-carrier.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-759707983"
+link: https://twitter.com/oratek_ch/status/1337500145966051330
+videos: []
+---
+The TOFU is an industrial carrier board for the CM4.
@@ -1,6 +1,7 @@
 ---
 layout: board
 title: "Turing Pi 2"
+short_description: 4 CM4 Cluster on a Mini ITX board.
 status: prototype
 picture: "/images/board-turing-pi-2.png"
 github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issue-743990222"
@@ -0,0 +1,12 @@
+---
+layout: board
+title: "Uptime Lab CM4 M.2 Blade Concept"
+short_description: Concept for 22 CM4s with M.2 storage in a 1U rack.
+status: prototype
+picture: "/images/board-uptime-lab-cm4-blade.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-738877163"
+link: https://uplab.pro
+videos:
+  - https://www.youtube.com/watch?v=4vSGl5kpf-k
+---
+In just one rack unit up to 22 devices, each has its own NVMe disk, 1 Gbit Ethernet with PoE support, micro HDMI and USB-C pots (for blades setup). Up to 176 Gb of RAM, 22 Quad-core Cortex-A72 and 44Tb of storage.
@@ -0,0 +1,14 @@
+---
+layout: board
+title: "Waveshare Compute Module 4 PoE Board"
+short_description: Some nice upgrades to the original IO Board design.
+status: production
+picture: "/images/board-waveshare-cm4-poe-board.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-760921807"
+link: https://www.waveshare.com/compute-module-4-poe-board.htm
+videos:
+  - https://www.youtube.com/watch?v=DKV7wv7NaCY
+---
+This board integrates an 802.3af-compliant PoE circuit (5V/2.5A) for powering the board over Ethernet, and includes 4x USB 3.2 Gen1 ports instead of the 2x USB 2.0 ports on the official Raspberry Pi Compute Module 4 IO board.
+
+It also has a 5V/12V combo fan header, a colored GPIO header, and allows power input between 7V-36V
@@ -0,0 +1,15 @@
+---
+layout: board
+title: "Wiretrustee 4x SATA NAS Board"
+short_description: SATA NAS board with an optional control board.
+status: prototype
+picture: "/images/board-wiretrustee-sata-4x-nas.png"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/25#issuecomment-769904055"
+link: https://wiretrustee.com
+videos: []
+---
+This 4x SATA NAS board operates over the PCIe bus on the Compute Module 4 to deliver at least 220 MB/sec RAID performance.
+
+It also features an optional "control" board (SATA status, power on/off, reset) connected via FPC cable to the main board for a nicer NAS case design. The integrated Marvell 88SE9215 controller does the PCIe <-> SATA signal conversion.
+
+Should be available on Crowdsupply at some point in the future, check out the website for the latest updates!
@@ -55,7 +55,12 @@
          </tbody>
        </table>

-        <div class="card_videos">
+        <div class="board_content">
+          <h3>Description</h3>
+          {{ content }}
+        </div>
+
+        <div class="board_videos">
          <h3>Videos Related to this Board</h2>
            {% if page.videos.size >= 1 %}
              <ul>
@@ -68,11 +73,6 @@
            {% endif %}
        </div>

-        <div class="card_content">
-          <h3>Description and Notes</h3>
-          {{ content }}
-        </div>
-
      </section>
    </div>

@@ -43,9 +43,16 @@
 // Index pages.
 .card_table,
 .board_table {
+  width: 100%;
+
  td {
    vertical-align: top;
  }
+
+  .links {
+    margin-top: 1em;
+    font-size: .8em;
+  }
 }

 .card_table_picture,
@@ -55,6 +62,11 @@
  margin: 0;
 }

+.card_picture_td,
+.board_picture_td {
+  width: 100px;
+}
+
 // Detail pages.
 #card_title,
 #board_title {
@@ -17,7 +17,7 @@ If you think a project should be added here, please [open an issue on GitHub](ht

 The following boards are commercially available and can be purchased today.

-<table class="card_table">
+<table class="board_table">
  <thead>
    <tr>
      <th>Picture</th>
@@ -28,14 +28,17 @@ The following boards are commercially available and can be purchased today.
 {% for board in site.boards_cm %}
  {% if board.status == "production" %}
    <tr>
-      <td>
+      <td class="board_picture_td">
        {% if board.picture %}
          <a href="{{ board.url }}"><img class="board_table_picture" src="{{ board.picture | image_thumbnail }}" alt="{{ board.title }}"></a>
        {% endif %}
      </td>
      <td>
-        <a href="{{ board.url }}">{{ board.title }}</a><br>
-        (<a href="{{ board.link }}">Website</a>)
+        <a href="{{ board.url }}"><strong>{{ board.title }}</strong></a><br>
+        {{ board.short_description }}
+        <div class="links">
+          <a href="{{ board.url }}">More Info</a> | <a href="{{ board.link }}">Website</a>
+        </div>
      </td>
    </tr>
  {% endif %}
@@ -47,7 +50,7 @@ The following boards are commercially available and can be purchased today.

 The following boards are either not yet commercially available or one-offs and _might_ be licensed under an Open Hardware License, allowing you to build your own.

-<table class="card_table">
+<table class="board_table">
  <thead>
    <tr>
      <th>Picture</th>
@@ -58,14 +61,17 @@ The following boards are either not yet commercially available or one-offs and _
 {% for board in site.boards_cm %}
  {% if board.status == "prototype" %}
    <tr>
-      <td>
+      <td class="board_picture_td">
        {% if board.picture %}
          <a href="{{ board.url }}"><img class="board_table_picture" src="{{ board.picture | image_thumbnail }}" alt="{{ board.title }}"></a>
        {% endif %}
      </td>
      <td>
-        <a href="{{ board.url }}">{{ board.title }}</a><br>
-        (<a href="{{ board.link }}">Website</a>)
+        <a href="{{ board.url }}"><strong>{{ board.title }}</strong></a><br>
+        {{ board.short_description }}<br>
+        <div class="links">
+          <a href="{{ board.url }}">More Info</a> | <a href="{{ board.link }}">Website</a>
+        </div>
      </td>
    </tr>
  {% endif %}
@@ -32,13 +32,13 @@ The Raspberry Pi Compute Module 4 IO Board exposes the Pi's PCI Express 1x lane
  <tbody>
 {% for card in site.cards_gpu %}
    <tr>
-      <td>
+      <td class="card_picture_td">
        {% if card.picture %}
          <a href="{{ card.url }}"><img class="card_table_picture" src="{{ card.picture | image_thumbnail }}" alt="{{ card.title }}"></a>
        {% endif %}
      </td>
      <td>
-        <a href="{{ card.url }}">{{ card.title }}</a><br>
+        <a href="{{ card.url }}"><strong>{{ card.title }}</strong></a><br>
        (<a href="{{ card.buy_link }}">Buy this Card</a>)
      </td>
      <td>{{ card.functionality }}</td>
@@ -62,13 +62,13 @@ The Raspberry Pi Compute Module 4 IO Board exposes the Pi's PCI Express 1x lane
  <tbody>
 {% for card in site.cards_usb %}
    <tr>
-      <td>
+      <td class="card_picture_td">
        {% if card.picture %}
          <a href="{{ card.url }}"><img class="card_table_picture" src="{{ card.picture | image_thumbnail }}" alt="{{ card.title }}"></a>
        {% endif %}
      </td>
      <td>
-        <a href="{{ card.url }}">{{ card.title }}</a><br>
+        <a href="{{ card.url }}"><strong>{{ card.title }}</strong></a><br>
        (<a href="{{ card.buy_link }}">Buy this Card</a>)
      </td>
      <td>{{ card.functionality }}</td>
@@ -92,13 +92,13 @@ The Raspberry Pi Compute Module 4 IO Board exposes the Pi's PCI Express 1x lane
  <tbody>
 {% for card in site.cards_m2 %}
    <tr>
-      <td>
+      <td class="card_picture_td">
        {% if card.picture %}
          <a href="{{ card.url }}"><img class="card_table_picture" src="{{ card.picture | image_thumbnail }}" alt="{{ card.title }}"></a>
        {% endif %}
      </td>
      <td>
-        <a href="{{ card.url }}">{{ card.title }}</a><br>
+        <a href="{{ card.url }}"><strong>{{ card.title }}</strong></a><br>
        (<a href="{{ card.buy_link }}">Buy this Card</a>)
      </td>
      <td>{{ card.functionality }}</td>
@@ -122,13 +122,13 @@ The Raspberry Pi Compute Module 4 IO Board exposes the Pi's PCI Express 1x lane
  <tbody>
 {% for card in site.cards_network %}
    <tr>
-      <td>
+      <td class="card_picture_td">
        {% if card.picture %}
          <a href="{{ card.url }}"><img class="card_table_picture" src="{{ card.picture | image_thumbnail }}" alt="{{ card.title }}"></a>
        {% endif %}
      </td>
      <td>
-        <a href="{{ card.url }}">{{ card.title }}</a><br>
+        <a href="{{ card.url }}"><strong>{{ card.title }}</strong></a><br>
        (<a href="{{ card.buy_link }}">Buy this Card</a>)
      </td>
      <td>{{ card.functionality }}</td>
@@ -152,13 +152,13 @@ The Raspberry Pi Compute Module 4 IO Board exposes the Pi's PCI Express 1x lane
  <tbody>
 {% for card in site.cards_storage %}
    <tr>
-      <td>
+      <td class="card_picture_td">
        {% if card.picture %}
          <a href="{{ card.url }}"><img class="card_table_picture" src="{{ card.picture | image_thumbnail }}" alt="{{ card.title }}"></a>
        {% endif %}
      </td>
      <td>
-        <a href="{{ card.url }}">{{ card.title }}</a><br>
+        <a href="{{ card.url }}"><strong>{{ card.title }}</strong></a><br>
        (<a href="{{ card.buy_link }}">Buy this Card</a>)
      </td>
      <td>{{ card.functionality }}</td>
@@ -182,13 +182,13 @@ The Raspberry Pi Compute Module 4 IO Board exposes the Pi's PCI Express 1x lane
  <tbody>
 {% for card in site.cards_adapter %}
    <tr>
-      <td>
+      <td class="card_picture_td">
        {% if card.picture %}
          <a href="{{ card.url }}"><img class="card_table_picture" src="{{ card.picture | image_thumbnail }}" alt="{{ card.title }}"></a>
        {% endif %}
      </td>
      <td>
-        <a href="{{ card.url }}">{{ card.title }}</a><br>
+        <a href="{{ card.url }}"><strong>{{ card.title }}</strong></a><br>
        (<a href="{{ card.buy_link }}">Buy this Card</a>)
      </td>
      <td>{{ card.functionality }}</td>