Actually add files lol

Scotto2/Case/kle.json

@@ -1,12 +0,0 @@
-[
-    [
-        "0,1\n\n\n\n\n\n\n\n\ne",
-        "0,0\n\n\n\n\n\n\n\n\ne",
-        { "x": 1 },
-        "1,1\n\n\n\n\n\n\n\n\ne",
-        "1,0\n\n\n\n\n\n\n\n\ne"
-    ],
-    [{ "x": 0.5 }, "0,0", { "x": 2 }, "0,3"],
-    [{ "x": 0.5 }, "1,0", "1,1", "1,2", "1,3"],
-    [{ "x": 0.5 }, "2,0", "2,1", "2,2", "2,3"]
-]

Scotto2/QMK/readme.md

@@ -1,20 +1,20 @@
-# ScottoDeck
+# Scotto2
 
-![ScottoDeck](https://i.imgur.com/xUl70qqh.jpeg)
+![Scotto2](https://i.imgur.com/xUl70qqh.jpeg)
 
-An 8-key macropad with two EC11 encoders designed for live streaming. Case files available [here](https://github.com/joe-scotto/scottokeebs).
+The Scotto2 is a 2 key large button gamepad designed for accessibility. Case files available [here](https://github.com/joe-scotto/scottokeebs).
 
-*   Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto)
-*   Hardware Supported: ATmega32U4
-*   Hardware Availability: [Amazon](https://amazon.com)
+- Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto)
+- Hardware Supported: ATmega32U4
+- Hardware Availability: [Amazon](https://amazon.com)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make handwired/scottokeebs/scottodeck:default
+    make handwired/scottokeebs/scotto2:default
 
 Flashing example for this keyboard:
 
-    make handwired/scottokeebs/scottodeck:default:flash
+    make handwired/scottokeebs/scotto2:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
@@ -22,6 +22,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
 
 Enter the bootloader in 3 ways:
 
-* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
-* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
+- **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+- **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
+