Space in the pane previewing the patch had nothing to act on: everything
there is in the patch already, so it can only mean taking those lines back
out, in the way that space in the staged side of the working tree's diff
only unstages.
A line of the patch can't be found by its number: the patch renumbers
whatever follows a change it leaves out, so a line of it names a line of
the commit's diff that isn't the one shown. A line is identified instead
by its position among its file's changes, counted in the diff the patch is
shown as. That is the same position it has among the changes the patch
holds for the file, since both are in the order the file has them. This
holds however the rendering came out, so a renderer that groups a hunk's
deletions before its additions, or leaves a change out altogether, no
longer matters.
The pane's rows are stated in terms of the trees the patch was
materialized into, so the paths come back to the repo's own before
anything is looked up in them. This also lets the lines there be copied
and edited, as the lines of a commit's diff can be.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The pane beside a commit's diff showed the patch being built from it by
assembling the text itself. That text could not be handed to a diff
renderer the way a diff can: a stdin filter might have coped, but a tool
that diffs two files could not. Its idea of how much context to show
around a hunk was also its own rather than git's.
Materialize the patch instead: write each of its files as it is before the
patch into one tree and as it is after into another, and let git diff the
two trees. The patch becomes a diff of real files, rendered by whatever
renders the rest of them, with git's own context around it. Its lines can
then be pointed at; taking them back out of the patch will need that.
The trees are named a and b, so that with git's own prefixes suppressed
the paths read like an ordinary diff's over the repo's own paths. They are
written when the patch changes rather than when it is shown, the patch
builder counting its own versions for that, and they go away with the
patch.
A renamed file is materialized under the name the patch expects to find it
under. Where the patch carries the rename, that is the name the file had
before, so the rename comes out as a rename. git names the trees
themselves in the two rename lines, having only the two paths to go by.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A patch built from what is on screen has to show what is in it, over the
diff those lines were taken from — which may be a diff renderer's rendering
of it, whose bytes are none of ours to touch.
So the marks are drawn in a gutter over the content, from the lines the
patch holds rather than from where they were drawn last: they are worked out
again whenever a pane's content settles, which is what keeps them right
across a renderer switch, a change of context size, or a walk through the
commits, and whenever the patch itself changes.
They come and go with the focus, being what the space key in the focused
view would act on, and stay while the focus moves between the diff and the
patch previewed beside it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The five panels that show a commit's diff now offer on it what the patch
explorer offers on the one file it can show at a time: space takes the
selected lines into the custom patch being built, or back out of it again,
and d takes them out of the commit itself.
So a patch can be built straight from the diff already on screen, over
several files at once and without entering the commit's files first — and
from a stash entry or a reflog entry too, whose diffs the explorer could
reach but which had no patch preview of their own to show for it.
The two arrive together because they are one answer to what a commit's diff
offers, and because d needs exactly what space builds: a patch of the
selection, which the rebase then removes from the commit. Which of the two
space is doing is decided by the first selected line, as toggling a file in
the commit files panel is, and the selection then moves past the lines
dealt with — they are still in the diff, a patch leaving the commit alone,
so a second press would otherwise take them straight back out.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Which line of a file a diff row is, in the terms a patch is built in, is
asked in two places already — staging a selection and editing a hunk — and
is about to be asked in a third, of a commit's diff rather than the working
tree's. The rule is the same one everywhere: an addition is where it sits in
the new version of the file, a deletion where it sat in the old one.
So the row is asked for its identity and the patch package for the lines
with those identities, instead of walking the diff working the identities
out again.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Removing lines from a commit, moving a custom patch out of one, undoing
either — none of it goes through the focused main view, so a selection over
that commit's diff was left where it was, painted over a rendering of a diff
that no longer exists.
Every render now asks whether it is showing a different diff than the one on
screen, which is what a rewritten commit looks like, and puts the selection
back on the change that has taken its place — the same reveal an action in
the view does for itself. It stands down for a render of the same diff,
where a selection, perhaps a range still being made, is exactly right as it
is, and for one that something more precise is already waiting to place.
The key a render is remembered under moves ahead of anything that might
change the command's arguments, so that it says which diff is being
rendered and nothing else.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It is built entirely on that helper, and the render chokepoint that is about
to want it lives in the gui package, which cannot reach a controller.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Five panels show a commit's diff in the focused main view — one file of it
from the commit files panel, the whole of it from the commits, sub-commits,
stash and reflog panels — and each answered for that diff itself, in the
same words.
Have them share one object instead, told only which diff it is, so that what
follows has a single place to say what can be done to a commit's diff and
needs saying once rather than five times.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A patch is built in terms of where a line sits in the file's diff, which is
what the patch explorer has to hand. The main view doesn't: a row of it
resolves to a line of a file, and what index that line has depends on how
much of the diff has been read and how a diff renderer chose to lay it out.
So let the two meet at the patch builder's edge, in the identity of a change
line — its number on the side it belongs to — leaving the main view to speak
only of lines it can see.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The lines of a commit's diff that are in the custom patch being built have
to be shown as such over whatever a diff renderer made of that diff, whose
bytes we can't touch — and mustn't, since everything we know about a row is
keyed by where it sits in the content.
So the marks are a decoration drawn over the content instead: a column
reserved at the left of every line, blank but for the lines that are in,
with the content shifted along past it. Nothing about the content changes
but the width it has to wrap in.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The staging view can hand the hunk you are on to an editor and apply what
comes back, which is how you stage something the diff cannot express: half
of a changed line, or a change written differently from either side. The
focused main view has to be able to do the same before that view can go.
The hunk is git's own, context and all, rather than lazygit's block of
adjacent changes: an editable patch is one that still applies, and the
context lines are what let git place it. What the editor leaves behind is
applied whole rather than matched against the file's diff again, the point
being that it says something the diff didn't.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Editing a hunk points an editor at a patch we wrote to a temp file and
waits. Nothing about the repo has changed when the editor returns: the
change lands when the caller applies what came back. But the suspend path
this went through refreshes as soon as the subprocess exits, so it reads
the state from before the patch is applied and then races the caller's own
refresh to publish it. Whichever lands last wins, and when it is the stale
one the files panel goes on showing the file as it was before the edit
until something else refreshes.
The caller is the one that knows when there is something new to see, and
both callers already refresh once they have applied the patch, so the
refresh in the middle only ever had a wrong answer to give.
Being a publish-order race, it doesn't reproduce reliably enough for a
test; holding a background refresh between its read and its publish shows
it every time.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Staging a selection walks the file's diff to find the lines the user
pointed at, by where each of them sits in the file. The next commit needs
the same answer for a single row, so pull the walk out of the staging path
before there are two copies of it.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two space presses in quick succession only staged one hunk. Input is
withheld until the refresh has landed, which is enough where the diff is
rebuilt on the spot, but the main view re-renders asynchronously: the
selection only moves to the next change once that render is on screen, so
the second press acted on lines that were no longer in the diff, and
staged nothing.
So the wait is now for the selection to be where the work carries on from,
rather than for the model. A restore therefore has to say when it is done —
which it can be either way, since a view given a message rather than a
re-render now gives up the restore it was holding instead of leaving it to
claim some later render.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
EndBlockingEvents dispatches the keys buffered during a block from inside its
own call, so a keybinding handler runs in the middle of whatever the caller was
doing. If a caller ends the block partway through updating the screen, that
handler acts on state the caller has yet to finish writing.
No caller does that today; both of them end their block from a UI-thread
callback of their own, with nothing left to do afterwards. The commit after this
one adds a caller that can. It ends the block from a render restore, and a
render of the two main panes resolves that restore halfway through laying the
panes out.
Queue the replay through Update instead, so the buffered keys arrive on a later
pass of the loop, as they would have if the user had pressed them then. Input
stays withheld until that pass runs. Gui events are dispatched in preference to
queued work, so a key pressed in between would otherwise be handled ahead of the
keys buffered before it.
The replay's error now reaches the error handler along with every other
handler's, and EndBlockingEvents has nothing left to return.
Three cases where landing on the change that took the place of the one acted
on is not the same as landing on the next line, or on the same line number:
staging an inserted line moves every later line of the file, so the hunk
below it is somewhere else afterwards; consecutive deletions all sit at the
same place in the new file, so nothing but their order tells them apart; and
unstaging half of a modification carries on in the pane the staged side has,
which is where the work was already.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Some merge conflicts can only be resolved by picking a side. The files
panel explains those rather than diffing them, and where one side deleted
the file and the other modified it, git's diff of that modification is
shown below the explanation. The focused main view took those change lines
for a diff of its own. It drew a selection over them and offered to stage
hunks of a file whose conflict staging can't resolve.
So have a render say whether it holds the diff the panel offers in the
main view, and put a selection only on one that does. Every diff render
already goes through NewMainViewDiffTask, so it says so for itself; the
custom patch preview, assembled as text rather than run as a command, says
so through NewMainViewDiffStringTask. Establishing a selection asks the
pane the same question rather than looking for change lines itself.
The selection has been wrong over this content since "Show a selection in
the focused main view" introduced it, and the fix belongs there. It lands
here instead because a render had no way to say what it holds until "Show
git's own diff when the renderer's can't be acted on" gave every diff
render one constructor to go through.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A diff renderer may lay a diff out however it likes: line numbers in a
gutter, the +/- column replaced by colour, the two sides in columns. Once
it has, we can only tell which line of which file a row shows if the
renderer says so. Under a renderer that doesn't say, the main view holds
a diff that can be read but not staged, edited or copied from. That is no
good now that the main view is where you stage.
So focusing it brings git's own diff instead, and every re-render while it
stays focused keeps to that, so staging a hunk doesn't flip back. Browsing
is untouched: you see what the renderer produced until you focus the view
to act on it.
Whether the renderer says anything is settled by asking it rather than by
watching it work: run it on empty input and see whether it announces the
protocol. Announcing is a property of the renderer, so the answer is known
before we render anything, and a diff with no lines to describe can't fool
it. Watching would have to see a diff go by first, and a binary file's diff
holds nothing that would tell the two cases apart. The answer is remembered
until the renderer changes. git itself is asked the same question, with the
renderer's own arguments, since it announces itself for exactly the formats
whose output can't be read back as a diff.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two things about a diff command follow from what its output is for: whether
the diff renderer produces it, and whether it is coloured. That was a
`plain` flag, which covers two of the three cases — the diff as configured,
and git's own uncoloured diff for building patches out of — and leaves no
room for the third, which is about to be needed: git's own diff, coloured,
for showing where the renderer's version of it can't be acted on.
So the flag becomes a mode. It also takes over deciding the colour, which
each command spelled out for itself, and it settles a question the flag
couldn't put: whether ignoring whitespace applies. It is about what the user
wants to see, so it holds for anything shown, and not for a diff a patch is
built from, which has to describe every change.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Staging in the main view leaves you looking at the working tree's diff with
everything you meant to stage in the index — and, until now, having to go
back to the files panel to commit it. The commit keys, and the one that
finds the commit a fixup belongs to, are offered there too, so that the
whole staging-to-committing round happens in one place.
They act on the working tree, which the main view only sometimes shows, so
they do nothing over a commit's or a stash's diff — browsing history can't
commit by accident — and are listed only where they do something. The check
happens per press: what the main view is showing changes as the user moves
about, while the bindings are registered once.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The remove key now works on a diff selection the way it does in the staging
view: on the unstaged side it throws the selected lines away, which it asks
about first, and on the staged side it takes them out of the index, which is
unstaging and needs no warning.
It goes through the same path as staging, so that everything around the
action behaves identically — the selection lands on the change that took the
place of the discarded one, and the focus follows the side it acted on.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Each side of a file's diff has a pane of its own, but a pane is only shown
while its side has something in it: staging the last unstaged change takes
the upper pane away, and unstaging the last staged one takes the lower one
away. The focus follows into the pane that is left, and the selection has to
be waiting there when it arrives — on the lines just acted on, which is where
they are now, unless they were discarded rather than moved, in which case on
what is left of the file. The pane being moved to shows no selection until
the restore places one, so that the selection it was left with the last time
it was used doesn't appear for a frame.
Whether the acted-on side still holds anything is a question the model can't
answer: a refresh only queues its update, and by the time it lands the
re-render this has to ride is already under way. So the answer is worked out
from what we just did — the files we changed report whether the selection
covered all of their changes, and the ones it didn't touch are as the model
describes them.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Configured to always split the diff, a pane is shown whether or not its side
of the file holds anything, so emptying the side the focus is on no longer
takes the pane away — but it does take away everything there was to do there,
which is the question the focus is really asking.
So the render says which of the panes it is giving something to act on,
rather than the focus reading that off which panes are shown.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Nothing has read that since the paint started settling the scroll position
before consulting the restore: what the answer was for was deciding whether
the reset the new content was owed still had to happen, and by then it has.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Each side of a file's diff has a pane of its own, and a pane is only shown
while its side has something in it. So anything that empties the side the
focus is on takes that pane away with it: committing what was staged, or a
commit or a discard happening outside lazygit and arriving with a refresh.
The focus was left on a pane that isn't there any more, where the next
keypress acted on nothing.
The render is what decides which panes are shown, so the question is asked
there, of every render rather than of the handful of actions that could think
to ask it themselves. The pane the focus moves into gets its selection once
that render has finished and there is something to put one on, the way
focusing it by hand would — and shows none until then, so that the selection
it was left with the last time it was used doesn't appear for a frame.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Where the selection starts out, and how it widens to a whole change block,
are questions about what the view is showing — the same rendered diff the
queries next door read. Nothing about them belongs to a keybinding, and the
render funnel is about to need them too, from a layer that can reach a helper
but not a controller.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Staging takes the lines it acted on out of the diff, so the selection has
nothing to sit on afterwards and would be left wherever those lines used to
be. What the user wants is the change that moved up into their place, so
that pressing the key again goes on to the next one — which is how staging
line by line through a file works.
The line acted on is gone, so it can't be remembered by identity the way a
re-render of the same diff remembers one; what is remembered instead is its
place in the sequence of the diff's changes, which the change after it
inherits. Staging the last change is the one case with nothing to inherit
it, and there the selection stays on the last change there is.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Putting a view back on a remembered line as it re-renders is two things: the
plumbing that watches the content arrive, reveals it at the right moment and
places the view, and the search that says which row to land on. Only the
second is specific to what is being remembered, and a second kind of it is
about to arrive — the change line an action leaves the selection on, which
is found by counting rather than by identity.
Behaviour-preserving.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The diff of a deleted file is its content going away, so putting every
line of it into the index leaves an empty file there (modified in the
index, deleted in the working tree) rather than the deletion the user
selected. The reverse case matches: the diff of an added file is its
whole content, and taking all of it back out of the index leaves the file
tracked and empty rather than untracked again. In the staging view you
had to enter such a file deliberately to reach these cases, but stepping
through a directory's diff hunk by hunk runs into them routinely.
Selecting every change of a file says "this file", so stage or unstage
the file itself. This applies to any file, since applying a file's whole
diff amounts to the same thing everywhere else.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Space in the focused main view now acts on the selected lines the way it
does in the staging view: over the working tree's unstaged changes it puts
them into the index, and over the staged ones it takes them back out. Which
of the two it does is a property of the pane, each side of the diff having
one of its own. Nothing has to be entered first, and a selection reaching
across several files of a directory's diff is applied as one patch per file.
The rows on screen are only a picture of the diff, so the patch is built
from the diff itself: each selected row's identity — which file, which line
of it, and whether it is a deletion — is looked for in the file's own diff,
and the lines that match are the ones the patch includes. Matching by
position rather than by counting rows is what tells the two halves of a
modified line apart, since the deletion and the addition replacing it sit at
the same place in the new file.
Panels other than the working tree offer no action on their diff yet, so
space says nothing and does nothing there.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A command that acts on a diff selection has nothing to say over content that
isn't a diff, and says so by describing itself as nothing — but a binding
that is displayed on screen is displayed whatever its description, so it
would show as a key with an empty label. Leave it out instead.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The main view shows a diff renderer's picture of a diff, and that is not
what you want on your clipboard: a renderer may drop the +/- column, move
the line numbers into a gutter, group a hunk's deletions before its
additions, or leave lines out altogether. So copying takes the lines from
the diff itself, locating them by the identity of the selected rows.
Only the panel that produced the diff can produce it again, though: the
working tree's staged or unstaged side, a commit's, a stash entry's. The
new seam is there for that. It asks per file, so that copying three lines
of a commit's diff doesn't fetch the whole of it, and it will grow the
actions on a selection as staging and patch building arrive.
The clipboard gets the run of diff lines from the first selected line of
a file to the last, so that lines the renderer hid come along and the
result still reads as a diff. Headers count as selected lines too. A hunk
header names the first line of its hunk, so it is looked for the way a
line of the file is. A file header names no line at all, and a rendering
may draw it over any number of rows, so a selection touching one of them
takes the whole header.
As in the patch explorers, a selection that is all additions or all
deletions loses its +/- column, ready to be pasted into code. One that
reaches into a header keeps the columns, and what comes out is a patch
fragment rather than lines of code.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The commit files context works out the two ends to diff from the ref (or
range of refs) it was entered for. The panels that hold those refs
themselves — commits, sub-commits, stash, reflog — are about to need the
same two ends, to hand out the diff behind what they render into the
focused main view. Pull the derivation out of the context so they can ask
for it rather than each spelling out the parent-of-from rule again.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Which pane a side of a file's diff appeared in depended on what else the file
had: the staged side had the lower pane while there were unstaged changes
above it, and took over the upper one when there weren't. So the same content
moved about, and which side a pane was showing was something the code had to
work out from the file's status rather than knowing from the pane.
Now each side has a pane of its own — unstaged above, staged below — shown
when there is something on it. A file with nothing unstaged shows its staged
changes in the lower pane alone, which then has the whole space, including
the label of the key that focuses it.
Nothing about this is visible to the user: the same diff appears in the same
place, with the same title and the same label, and the same keys focus and
scroll it. What it is for is the code, which no longer has to ask the file
what a pane is showing — and, once the diff can be staged from, no longer has
to make one key mean opposite things in the same pane.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The main section shows one pane or two, which was enough while the second
pane only ever accompanied the first. It is about to have to show the second
one by itself: the working tree's staged changes are moving there for good,
and a file with nothing but staged changes has only that side to show — it
should have the whole section rather than sit under an empty pane.
So which panes are shown becomes a three-way answer, derived from which of
them the render has content for.
Behaviour-preserving: nothing renders into the secondary pane alone yet.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A pane that has been emptied is showing nothing, but it kept the scroll
position it was left at and went on claiming the render it used to show,
so the next render into it — the same command's output, the file it was
showing being selected again — counted as content the view already had,
and was revealed partway down.
So say what the empty pane is: at the top, and showing nothing that a
render can be a re-render of.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A pane the render has nothing to show is emptied, but keeps the scroll
position it was left at and its claim to the render it was showing. So
when it comes back — the file it was showing before is selected again —
its content is rendered under the same command it already had, which is
taken for the content the view is showing, and the user is left partway
down a diff they have only just been given.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A range or hunk selection covers a stretch of the diff, and restoring only
the cursor left the other end pointing at whatever line the new rendering
happened to put there — with more context lines above, a selected hunk
would grow a tail of context it never covered.
So the other end is remembered by identity too, and put back before the
cursor. If it is a line the re-render dropped, the selection is left as the
single line we landed on: there is no telling which line inherits a
selection's edge, and a wrong guess acts on lines the user never chose.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Prep: pull the index out of the candidate search, so that looking up a
single diff line doesn't have to phrase itself as a search for the nearest
survivor among one candidate.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Ignoring whitespace is how you ask whether what you are looking at is more
than reindentation, so being dropped at the top of the diff is a poor
answer: you have to find your way back to the change you were asking about
to see what became of it.
Unlike the other ways of re-rendering a diff, this one can take the line
you were on away for good, along with the hunk or even the file it was in.
When it does, the view lands on the nearest line the diff kept, wherever in
it that is — the walk of fallbacks doesn't stop at the file's edge, since a
file of nothing but reindentation leaves nothing nearer to land on. And
when ignoring whitespace empties the diff altogether, there is nothing to
keep and the view simply shows what is left.
A whitespace-only change that shares a hunk with a real one is a happier
case: it is shown as a context line rather than as a change, but it is
still the same line of the same file, so we stay on it.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Cycling through the diff renderers is for comparing how they show the same
change, which is hard to do from the top of the diff each time. The line
you were on is the same line of the same file whichever renderer draws it,
so the restore finds it again — by the records a renderer states, where it
speaks the protocol, and by parsing its output as a diff otherwise.
The restore sits in DiffHelper.RenderToMainAgain. A switch between a
dark and a light terminal background renders the diff again through the
same helper, so it keeps your place as well.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Pressing { or } re-rendered the diff with less or more context around each
change and dropped you back at the top of it, so finding your way back to
what you were reading was on you.
Remember where the view is before triggering the re-render, and have the
restore put it back there. The line to remember is the selected one when a
selection is showing, and the middle visible line otherwise — what you are
looking at, rather than the view's top edge. It is remembered by identity,
because the new rendering puts it on a different line of the view, and it
is found again by the records a diff renderer states for its rows, or by
parsing the rendering as a diff where it still looks like one.
The line may not be there at all afterwards: shrinking the context takes
context lines away. So the lines around it come along as fallbacks, nearest
first, and the view lands on the nearest one that survived, put back on the
screen row it was on — leaving what you were reading where it was, give or
take the line that went. The walk that collects them covers the whole diff
rather than stopping at the nearest change on either side: those always
survive a context-size change, but not everything a re-render can do to a
diff is that considerate.
Under a diff renderer that says nothing about its rows there is nothing to
look for at all, and the view is left at the offset it had instead: often not
the line it was on, but always closer to it than the top of the diff. That is
what the re-render asks for besides the restore, since it is a different
command from the one that produced what is on screen and would otherwise be
taken for a diff the user has never seen.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A re-render builds into an off-screen buffer and swaps it in when it has
read enough to paint. Deciding where the new content should be shown means
reading it before that swap: afterwards it is on screen already, and
whatever we then scroll to has been seen at the wrong position first.
So expose the off-screen buffer's diff-line contents and line count, the
latter for telling when a line found there has a screenful below it. The
contents come in two forms, the whole buffer and everything from a given
line on, so that a reader following the render as it loads can look at each
line once instead of re-reading the buffer per line.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A view that re-renders content the user is already looking at, laid out
differently — a different context size, another diff renderer — starts the
new render from the top, losing where they were. Where that is can't be
carried over as a scroll position, because a different layout of the same
content puts the line they were on somewhere else; it can only be found by
looking at what the re-render brings in.
So let a restore be installed on the buffer manager just before the
re-render is triggered. It rides the next command task, which asks it after
each line whether enough has arrived to show what it remembers, and then
hands it the first paint: the restore searches the off-screen buffer, swaps
it in, and places the view, in that order, so that the search happens while
the previous content is still displayed and the new content is never drawn
at the previous render's scroll position. A restore that placed the view
keeps the scroll reset new content would otherwise get; one that couldn't
find what it was looking for leaves the render to do what it would have
done anyway, and the lines-read count still has the last word on when to
paint, so a restore can never hold a render back for ever.
Some renderings can't be searched at all: a diff renderer is free to say
nothing about which line of which file each row shows, and then no line of
the old rendering can be looked for in the new one. There the offset into
the content is all that is left to go on, and it is nearer to where the user
was than the top is, so a re-render can also ask merely to be left where it
is. That request rides the next task the same way, and answers the same
question the scroll reset and the loading placeholder are asking: whether
what is coming is content the user has not seen.
Both outlive the task they were installed for, like the pending scroll reset
does and for the same reason: that task can be stopped and replaced by a
background refresh before it ever paints, leaving the replacement to honour
it. The loading placeholder stays out of the way while either is pending —
blanking the view for a message before putting the user back where they were
is the flicker they exist to avoid.
Nothing installs either of them yet.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Search the diff, then move the selection with the arrow keys, and
pressing "n" goes to the match after the one the search was last on
rather than to the one after the selection. So walking through the diff
and then picking up the search where you got to takes as many presses as
there are matches behind you.
List views and the staging view keep the current match in step with their
selection; do the same here.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Now that a diff view always carries a selection, the highlight fights the
diff itself for the line's colours. Painting the selection across the whole
line takes over the background, and a selected hunk becomes one solid block
with no boundary between what was removed and what replaced it — the more
lines you select, the less you can read.
This isn't specific to renderers like delta that say which side of the diff
a line is on by colouring its background, though they suffer most: git's own
output puts red and green text on that background, which reads badly too.
Since there is no rendering of a diff that a full-width highlight doesn't
degrade, there is nothing here worth configuring — the bar is simply what
diff views use.
Left edge only, and two columns wide: every convention for marking a row of
coloured content — change bars, diff gutters, selection gutters — puts the
marker on the left, and bracketing both edges reads as framing instead.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Reading a diff is often how you notice something to fix, and the file and
line are right there in front of you — so pressing edit opens the file at
the line under the selection, as it does in the staging view.
The line number the diff shows is the line number in the version the diff
is of, which for a commit's diff is not where that line sits today, so it
is carried forward the same way clicking a diff-renderer hyperlink already
does. A file header names no line, so it just opens the file.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Reading a diff of any size means moving in bigger steps than a line at a
time, which the staging view offers and the main view didn't. So the same
hunk keys work here, and n / N step from file to file — worth having only
here, since a diff spanning several files is something the staging view
never showed.
Where "the next file" begins isn't in the text: a diff renderer may print
whatever it likes above a file's content. So navigation lands on the first
row that states which file it belongs to, which is the file's header when
the source says so and its first content line otherwise. The anchor's own
file is found by scanning down rather than to the nearest row either way —
having just landed on a header, the nearest row above belongs to the file
we came from, and taking it would send the next press back where we
started.
A file you go to is brought to the top of the view, since the file is what
you went there for and the more of it is on screen the better. That only
applies where the view has to scroll at all: a file already on screen
leaves it where it is. In hunk mode what ends up selected is the file's
first change rather than the row the file begins at, and a large context
size can put that change further down than a screenful; the selection is
scrolled into view afterwards as any other jump's is, and the alignment
gives way where the two can't both hold.
The diff loads lazily, so a target below the loaded portion isn't there to
be found; rather than doing nothing, we read the rest in and look again.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Selecting a range with the mouse is the obvious gesture once clicking
selects a line, and it's the only way to get a range without knowing the
keybindings.
The range has to be anchored where the mouse went down, which the view
can't tell us: a click in hunk mode selects a whole block, leaving the
view's own range anchor at the block's far end, so a drag from there would
grow the selection from the wrong end. So the clicked line is remembered
when the click happens, and the drag anchors there.
A drag that reaches the edge of the view keeps scrolling, using the same
autoscroller the staging view does — mouse capture means the pointer can be
dragged past the edge, and there is more diff down there than fits on
screen. Unlike the staging view, whose content is a string that is always
there in full, this diff loads lazily, so scrolling down has to keep
reading it in or the autoscroll would stop at the loaded edge.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Users who set hunk mode as their default get it when entering the staging
view, and the focused main view is on its way to replacing that view, so it
has to behave the same: focusing selects a whole change block, and clicking
a change line selects that line's block, ready to act on. A click on a
context line still selects only that line, since the click points at it
precisely — you may well want to edit it. A click inside the block that is
already selected does the same, giving hunk mode up and going back to line
by line. That keeps a single line reachable with the mouse in a block too
long to see the end of, and matches how a click inside a range selection
already collapses it.
The block offered up is the first one that begins on screen, so that its
whole extent can be seen before acting on it. Only when none does — a change
too long to fit on the screen — is the block that reaches into the view from
above taken instead, and the selection then extends to its first line off
screen: focusing a diff must not move it, so nothing here scrolls.
The staging view makes one exception, and so must we, or a file that is one
solid block of changes (a file you just created, or deleted) would come up
with all of it selected. The staging view asks the parsed patch; we ask the
rendered diff the same question, which needs no second git invocation and
works over a whole commit's diff, where the answer differs per file.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Focusing the main view is about to establish a hunk selection, and that
happens in a free function shared with the controller that focuses the
main view from a side panel, which has no main view controller to hand.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The mode of a diff view's selection lives on the context of the pane showing
it, and until now only the controllers that drive the selection needed to
name that pane, all of which have it as the concrete context it is.
A side panel is about to be handed the pane a command was invoked in, so
that it can act on what is selected there — and it can't be handed a
context, the interface it is handed one through being declared where a
context's concrete type isn't available. So the state moves to where such an
interface can speak of it, and the panes gain one: a context that has a diff
selection.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The focused main view could be scrolled but not pointed at: there was no
way to say "this line" or "these lines", which is what every line-level
interaction needs — editing a line, copying part of a diff, and, later,
staging. So a diff main view now always carries a selection while focused,
starting at the first change already on screen so that focusing doesn't
move the view.
The mode of the selection lives on the main context (a single line, a
range from a fixed anchor, or the change block around the cursor); the
selected line and the range anchor stay in the view itself, whose native
range select draws them, so there is no new highlight machinery. The modes
and their keys are the ones the staging view has, including that the arrow
keys step from block to block in hunk mode.
A pane holds something to select only when what it is showing is a diff
with changes in it, which the render works out once its content is final: a
placeholder message is not a diff, and neither is a diff with nothing in it
at all, such as a binary file's or an empty commit's. Whether a selection
is then drawn there follows from the context stack, as it does for every
other view.
A click in the focused main view now has a meaning again: it selects the
line it points at.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
ReadToEnd holds a gocui task while it reads, so that lazygit doesn't count as
idle while something waits on the result. That has nothing to do with reading
all the way to the end, and the next commit needs it for a bounded read too, so
the two are pulled apart.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The count comes from the view's buffer, which a rendering task appends to on
its own goroutine, so reading it without the write mutex is a data race. Nobody
called it until now, which is why nothing has tripped over it; the next commit
does, from the UI thread while a render is still loading.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Both callers pass a main context, and focusing one is about to need more
of it than the Context interface offers. Saying so in the signature also
retires the type assertion that was there only to reach ClearSearchString.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
With both implementations gone, nothing is left that lets a side panel
handle a click in the focused main view, so the mechanism for attaching
one to a context can go as well.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Clicking a line of the focused main view entered the staging or patch
building panel at that line. The focused main view is about to gain a
selection of its own, which is what a click there should set — and with
the explorers on their way out, the dive has nowhere to go.
Nothing replaces the gesture yet, so for the next couple of commits a
click in the focused main view does nothing.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The focused main view is about to show a selection, but only where there
are diff lines to act on: a branch's commit log or the status dashboard
has nothing to select. Rather than have the main view guess from the
rendered content, let the side panels say so, since each of them knows
what it renders.
The classification is finer than a yes/no because acting on a selection
means different things per panel — staging into the working tree for the
files panel, taking lines into a custom patch for the commit panels — and
those actions want the same one answer as this. Only whether a panel
shows a diff at all is read for now.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The focused main view is about to get a real diff selection, which makes
its up/down/page/top/bottom keys mode-aware: what they do depends on the
select state the main view controller owns. Keeping them in a separate
controller would mean either duplicating that state or reaching across
controllers for it, so move them to where the state will live. The two
controllers were attached to the same pair of contexts and nothing else,
so nothing else can notice.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A renderer that speaks the protocol emits nothing unless it is asked to,
so that its output stays plain wherever it is used outside lazygit. The
variable names the versions we understand.
git is one of the renderers we ask. It has no pager to spawn, and so no
terminal to spawn one in, but it still renders the diff itself — for the
word-diff formats, whose markup nothing else could resolve — so the
request has to be made before we decide a pty isn't needed.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Where a renderer states which line of which file it is rendering, take
that as the line's identity. The renderer knows, and for a rendering
that no longer looks like a diff nothing else does. Reading the rendered
text stays the way for the renderings that keep a diff's structure, and
for the renderers that say nothing at all.
Which of the two is used is settled for the rendering as a whole, not
row by row. A rendering with records is not parsed at all, not even for
the rows the renderer says nothing about. Its text is no unified diff,
and a row of it can read like one. Under delta, a commit that adds a
test whose input is a diff shows the test's "diff --git a/img.png
b/img.png" line as a row of its own; parsed, that row opens a file
section that runs to the end of the rendering, and every row delta puts
between hunks and files comes out as a header of a file called img.png.
So the untagged rows of such a rendering stay unresolved, as the
protocol has it (spec section 6.4).
Header records are accepted too. This lets a renderer point at a file
with no content lines, such as a pure rename, a mode change or a binary
file: for those files the header is the only row in the diff.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A diff line's identity is about to become recoverable from a second
source, a diff renderer's own records, and a renderer states the path
however it likes — absolute paths included. The field can't promise
repo-relative any more.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Wherever two diff lines end up on one rendered line, a renderer emits
their records back to back: the deletion and the addition of a
modification collapsed into a single column, or a banner announcing a
file and its first hunk at once. A changed line that is empty is
rendered as its record alone. Attaching a record only to the cells it
precedes loses all of these — the last record of a run wins, and an
empty changed line becomes a line we can say nothing about at all.
Give such a record a cell of its own instead. It renders nothing, so the
diff looks the same, but the line keeps every record it was given.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Before the diff, a conforming renderer emits one OSC 1717 record that
carries only the version — its way of announcing that it speaks the
protocol at all, without a host having to inspect what it renders. It
describes no line, so keeping it would give the first line of the diff a
record that says nothing about it.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A diff renderer that restructures the diff — into columns, or with the
+/- markers replaced by colour — leaves us no way to tell which line of
which file a rendered row came from, which is what acting on the row
requires. The OSC 1717 protocol has the renderer say so directly: it
prefixes each line it renders with a record naming the file and the
line's position in the old and new versions of it.
Attach each record to the cells it precedes, so that a row's records
survive wrapping and the columns of a side-by-side rendering, and hand
them to readers together with the row's text: the two have to describe
the same buffer, and a re-render can rebuild it between two reads.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The OSC parser dispatched on a single character, so only the
single-digit OSC 8 could ever be recognized; the diff-line metadata
protocol we are about to read uses OSC 1717.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
git doesn't just print the path: it terminates it with a tab when the
path contains a space, and C-quotes the whole field when the path
contains anything it won't print raw — with core.quotePath, which is on
by default, that means any non-ASCII byte, so a file called café shows
up as "b/caf\303\251".
Taking the field verbatim therefore gives a path that doesn't exist, for
a whole class of perfectly ordinary file names. The quoting is Go's own
string syntax, octal escapes and all, so decoding it is a call to
strconv.Unquote.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
To act on the line the user is pointing at in a diff view — to stage it,
to open it in an editor, to keep the cursor on it while the diff is
regenerated — we need to know which file it belongs to and where it sits
in that file. Only the diff the view was rendered from knows that, and
by the time it's on screen all we have is text.
So parse it back: the view's contents are (usually) a unified diff, and
running them through the patch parser recovers each row's file, kind and
line numbers. "Usually" is why this goes behind a seam, and why it
answers "I don't know" rather than guessing: a diff renderer is free to
restructure what it prints, and a wrong answer here means acting on the
wrong line of the wrong file.
Parsing a whole buffer is a separate entry point from parsing a single
line, because a caller resolving every row of a large diff must not
re-parse a file's section once per line of it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A reader that parses a view's content rather than showing it wants the
text the writer wrote, and the cells don't always spell it. A tab is
expanded into the spaces it fills, so a line read back from the cells
ends in one to four spaces where the writer put a tab. A carriage
return moves the write cursor back to the start of the line, so the
text written after it overwrites what came before.
The parser of the main view's diff, which the next commit adds, meets
the first case in every header of a file whose path contains a space.
git terminates the path field of a "---" or "+++" line with a tab
then, and a parser reading the cells takes the spaces the tab became
for part of the path. That path names a file that doesn't exist, so
the file's lines can't be acted on.
Keep the text as written per line, from the first character on that
the cells spell differently, so that a line without a tab or a
carriage return costs nothing. LinesAsWritten hands it out the way
BufferLines hands out the cells' text.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
OverwriteLines is asked for a line and writes the one below it when the
write before it ended in a newline. The view holds such a newline back
until more content arrives, so that it doesn't end in an empty line,
and OverwriteLines moved the write cursor without letting go of it, so
the write that followed advanced to the next line first.
Move the cursor through SetWritePos, which drops the pending newline
along with it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A view holds back the newline that ends a write until more content
arrives, so that it doesn't end in an empty line. OverwriteLines moves
the write cursor to the line it is given without letting go of that
pending newline, so the write that follows advances first and lands on
the line below. Nothing in lazygit overwrites lines right after such a
write today.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Everything about a diff's content — which file and line a row belongs
to, whether it's a change — is a property of the unwrapped buffer line,
while the cursor, clicks and the range selection all speak in view
lines, which count wrapped segments. Reading the content under the
cursor therefore needs the mapping in both directions, and doing it
outside gocui isn't possible: the wrapping is internal, and the caller
couldn't take the view's lock across the lookup and the read.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Parse is lenient: it takes any text and reads a diff out of it, which is
what we want when we hand it a diff, but it has no way to say "this
isn't one". We're about to parse the *rendered* contents of a diff view,
which a diff renderer is free to restructure — putting the line numbers
in a gutter, say, shifts the +/- marker off the start of each body line,
so every line reads as context and the parse silently lies about which
lines are changes.
Comparing each hunk's body against the lengths its header declares
catches exactly that, without teaching us anything about any particular
renderer's layout: a faithful unified diff agrees with its headers, a
restructured one doesn't.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Identifying a change line of a diff by its file line number needs both
sides: two consecutive deletions sit at the same new-file position, so
only their old-file line numbers tell them apart. LineNumberOfLine only
answers for the new file, which leaves deletions ambiguous.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Wrapping the content at another width moves every line of it to a
different view line. The positions into the view are all view lines: the
scroll offset, the cursor, a range's anchor. Each of them is then left
pointing at a line it was never on. Committing the last of the staged
changes widens the main view by half a screen, and that moves a selected
hunk somewhere else entirely.
Carry the positions through the lines of content they were on. A position
always meant a line of content rather than a view line. The line the
cursor is on keeps the row it was drawn on, so it stays in front of the
user rather than the view scrolling under it; a view with no cursor on
screen keeps its own place instead. A range's ends go on the outermost
segments of their lines, since a range covers lines of content and not
the segments those lines are drawn as.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The scroll offset, the cursor and a range's anchor are all view lines, which
count the segments each line of the content is wrapped into. A change of
width wraps the content differently, so every one of them ends up on a
different line than the one it was put on.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A test asks which lines of a view are selected; a wrapping view's cursor and
range anchor answer in view lines, which count the segments each line is
drawn as. Going through the segment-to-line mapping keeps the answer in the
terms the question was asked in, and a line the selection covers several
segments of is reported once.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The lines a selection covers are asked for by view line, which counts the
segments a wrapping view breaks a line into, and then used to index the
content, whose lines are unwrapped. The two agree only for a view whose
content doesn't wrap.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Tags can only be pushed one at a time. Let the push command of the tags
panel work on a range selection of tags too. It asks for one remote and
pushes all selected tags to it with a single git command.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
This lets pushing a range selection of tags push them all with a single
git command.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Tags can only be deleted one at a time. If many of them have piled up,
for example backup tags made before rewriting a branch, deleting them
takes a lot of keypresses.
Let the delete menu work on a range selection of tags. It deletes the
selected tags with one git command for the local tags and one for the
remote tags, and asks for a single remote for all of them. After
deleting local tags, collapse the range selection to its first line;
otherwise it would select the tags that moved up into the place of the
deleted ones.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Deleting a remote tag and deleting a local and remote tag each have
their own copy of the code that asks for the remote and for a
confirmation. Deleting a range selection of tags needs to change it in
the same way for both.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
This lets deleting a range selection of tags delete them all with a
single git command, the same way it works for branches.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Deleting and pushing a range selection of tags will need to show their
operation on all the selected tags. Move the code from BranchesHelper
into a generic function that takes the items and the key of the context
that shows them.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
When somebody else rebases a stack of branches and force-pushes it,
pulling the topmost branch leaves the branches below it diverged. Since
#6067 they can be updated manually with `f`, but pushing the stack
offers to push the branches
below along with the current one, so pulling should be symmetric, and
this PR adds that.
When somebody else rebases a stack and force-pushes it, pulling the
topmost branch leaves the branches below it diverged. They can be
updated with `f`, but pushing the stack offers to push the branches
below along with the current one, and pulling should be symmetric.
When pulling, find the branches stacked below the current one that can
be updated without losing anything. These are those that are behind
their upstream branches, and those that diverged from them only because
they were rewritten. If there are any, show a menu that lists them and
offers to update them in addition to pulling the current branch, or to
pull only the current branch. The current branch is pulled as before.
The decision is based on the last fetch, not on a new one, so that the
menu appears right away. If the remote has changed since then, a branch
might not be offered although it could be updated; it then shows as
diverged after the pull, and pulling again offers it. The update itself
fetches the upstream branches and checks them again, so it never loses
commits.
Branches that are checked out in another worktree are not offered,
since updating them would change the files there.
The branches below are updated before the current branch is pulled. If
one of them pointed into the commits that a rebasing pull rebases, the
pull would move it when rebase.updateRefs is set, and updating it
afterwards would fail. If updating them fails, the current branch isn't
pulled.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Pushing a stack and fast-forwarding a range of branches each show their
operation on all the branches involved, with their own copy of the same
code. Pulling a stack will need it too, so move it to BranchesHelper.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
FastForwardBranches looks up the worktrees of the branches in the model
on the UI thread, and then does the rest on a worker, with the branches
shown as being fast-forwarded. The next commit needs to update branches
as part of pulling the current one, in the pull's own task.
Move everything except the inline status into PrepareFastForward, which
returns the part to run on a worker.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Lazygit can auto-forward main branches after fetching, which is useful
to always keep your `main` branch up to date. However, checking out
`main` in another worktree stopped this from happening, on the
assumption that we don't want to touch branches that are checked out
somewhere. For a main branch this is not an issue (as long as the
worktree doesn't have modified files); forwarding it in that case too is
useful for the setup where you always keep main checked out in the main
worktree, and work on feature branches in linked worktrees.
Pressing `f` on such a branch already supported fast-forwarding it even
when checked out in a worktree, so now auto-forwarding after fetching
does the same.
If a main branch is checked out in another worktree, auto-forwarding
after a fetch skips it. People who keep the main branch checked out in
their main worktree, and work on feature branches in linked worktrees,
therefore never get it forwarded.
Fast-forward such a branch in the worktree it is checked out in, as `f`
does. Skip the worktree if it has changes to tracked files, since
nobody asked for its files to change. Also skip it if it is mid-rebase
or mid-bisect, because its HEAD is then detached from the branch. A
branch in the current worktree is never forwarded. This covers the case
of the current worktree being mid-rebase on a main branch, whose ref
would otherwise be forwarded under the rebase.
Auto-forwarding now writes the same reflog message as `f`
("lazygit: update to upstream branch").
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If `f` is used on several branches that are checked out in other
worktrees, the first worktree in which the fast-forward fails stops the
whole operation. For example, an untracked file that the fast-forward
would overwrite leaves the branches after it untouched, even though
nothing is wrong with them.
Try all the branches, and report the errors of the failed ones
together. The checks that refuse to fast-forward any of the branches
still run before anything is moved.
The next commit uses forwardBranches for auto-forwarding branches in
other worktrees, where stopping at the first failure is worse. A
worktree that fails every time would prevent the ones after it from
ever being forwarded. For this, forwardBranches also takes the git
commands to use, since a background worker doesn't block switching
repos.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
AutoForwardBranches runs in the Then callback of the refresh after a
fetch. This is on the UI thread, so the git command for updating the
branches blocks the UI while it runs. This is fine for a single
update-ref, but the next commit adds a git status and a git merge for
each branch that is checked out in another worktree.
Keep reading the branches from the model on the UI thread, and move the
git work to a worker.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Lazygit shows local branches that have diverged from their upstream with
a yellow `↓3↑5`. There can be two reasons for diverging, and right now
it's impossible to tell which of these is the case: (1) you rebased the
branch locally (or rewrote its history), in which case you want to
force-push it, or (2) someone else rebased the branch, in which case you
want to pull it. (We'll ignore the case where both of these happened, in
which case you need to manually reconcile the work that each side did,
e.g. through cherry-picking; you want to avoid this situation.)
With this PR, lazygit distinguishes the two scenarios, and for (2) it
shows the `↓3↑5` in a dim yellow. What's more, you don't even have to
check out the branch to pull it; you can press `f` to reset it to its
upstream without checking it out, like you would fast-forward a branch
that is behind its upstream. In fact the command is still called
"Fast-forward", which is technically not quite correct, but it feels the
same to me. Fast-forwarding a diverged branch in this way is very useful
if an entire stack of branches was rebased remotely; you can simply
range-select all those branches and hit `f` to bring them up to date
with their upstreams.
The worktree loader associates a worktree that is mid-rebase or
mid-bisect with the branch involved, even though its HEAD is detached.
Fast-forwarding such a branch therefore ran the fast-forward in that
worktree. This moved the detached HEAD and put the upstream commits
into the rebase in progress, while the branch stayed where it was.
Remember in the worktree model when its branch comes from a rebase or
bisect, and refuse to fast-forward the branch in that case. Updating
only the ref is no option for a rebase; the rebase writes the branch
when it finishes.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If a branch is being rebased in a worktree, pressing `f` on it moves
the detached HEAD of that worktree instead of the branch. The upstream
commits end up in the rebase in progress, and the branch itself stays
where it was. The same happens for a branch being bisected.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Branches that lazygit forwards to their upstream move by a direct ref
write, so no git command turns up in their reflog to explain it. Until
now the entry had no message either, leaving `git reflog <branch>` with
nothing but a blank line about it. Name lazygit and what it did, so that
a branch which moved on its own can be traced.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
After somebody else rebased and force-pushed a stack of branches, every
branch of the stack has to be brought back to its upstream, and pressing
`f` on them one by one is as tedious as the checking out and pulling it
replaces.
Let `f` work on a range selection. The upstream branches are fetched with
one `git fetch` per remote, and the branches that aren't checked out
anywhere move in a single `git update-ref` call. All the selected
branches are looked at before any of them is moved, so a branch that has
to be refused leaves the others alone rather than updating the stack
halfway.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When somebody else rebases a branch and force-pushes it, the local
branch is left diverged from it, so `f` refuses to touch it. To get back
in sync, the branch has to be checked out and pulled, and for a stack of
branches that means doing it once per branch.
Such a branch has none of its own work in it, though: the commits it is
ahead by are the old versions of the ones that are now on the remote
branch. So when the branch has diverged and none of the commits it is
ahead by is ours, reset it to its upstream instead of refusing. This is
the same state that checking the branch out and pulling it would produce,
as rebase drops commits that the upstream already has.
A branch that isn't checked out anywhere is reset with the same
`git update-ref` that a fast-forward uses. One that is checked out
somewhere is reset with `git reset --keep`, and only when that worktree
has no changes to tracked files, so that the files under the user's feet
change no more than they have to. `--keep` also refuses to overwrite an
untracked file that the reset would bring in, which `--hard` would do
silently.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Fast-forwarding a branch that isn't checked out ran a single
`git fetch <remote> refs/heads/<branch>:<branch>`, so git's own refusal
to move a local branch backwards served as the safety check. A later
commit widens the set of branches the command accepts, and for that
lazygit has to make that decision itself.
Fetch the remote branch on its own, updating only its remote-tracking
branch. Then ask git whether the branch is an ancestor of it, and only
then move the branch: with `git update-ref` when it isn't checked out
anywhere, guarded by the hash we knew it to have, and with
`git merge --ff-only` in its worktree when it is checked out there.
Keeping `git pull --ff-only` for the latter case would fetch a second
time.
Fast-forwarding a branch that isn't checked out in a worktree had no
integration test at all, so add one. The second new test covers a repo
that keeps no reflogs, because a later commit starts reading those and
this case has to keep working without them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Most of the logic of this controller belongs in a helper, and the next
commit reshapes it, so move it over unchanged first to keep that diff
about the change itself.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The function asks git whether HEAD is an ancestor of a ref, and its name
says what the one caller wants to know. A later commit asks the same
question about a branch that isn't checked out, so let the caller name
both refs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When somebody else rebases a branch and force-pushes it, our branch
shows up as diverged, say ↓5↑3, and that looks exactly like a branch
that carries three commits of our own. The two want different treatment.
The first one only has to be moved to its upstream, while the second one
needs a decision about what to do with those commits. The panel doesn't
tell them apart, so users have to look at each branch in turn to find
out which one they are dealing with.
Determine for every diverged branch whether it has commits of its own,
and dim its divergence when it doesn't. This runs on a worker, as it
takes a few git commands per diverged branch, and a branch keeps the
answer from the previous load while a new one is in flight, so that the
display doesn't flicker. A later commit teaches the fast-forward command
to act on such a branch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The flag says whether this load is the one that kicks off the values
determined in the background afterwards. A later commit adds a second of
those next to the behind-counts, so name the flag after what it controls
rather than after its only user so far.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A branch that has diverged from its upstream doesn't necessarily hold any
work of its own. If somebody else rewrote the remote branch and
force-pushed it, our branch is still at the commits it had before, and
every one of them was on the remote branch at some point. A later commit
offers to reset such a branch to its upstream, and for that it has to
tell this case apart from a branch that holds commits created here.
The reflog of the remote-tracking branch records the values it had before
it was rewritten, so a commit that was ever on the remote branch is
contained in its current value or in one of those. HasLocalOnlyCommits
asks git for a commit of the branch that none of them contains.
Two details of the reflog are worth knowing. The value the ref had before
its oldest entry is that entry's old value, and <ref>@{<number of
entries>} is the only way to name it. It doesn't exist when the oldest
entry is the one that created the ref, and asking for it then is an
error, not an empty result. Reflogs can also be missing altogether,
because core.logAllRefUpdates defaults to false in a bare repository.
Neither case must stop us from recognizing a branch that is strictly
behind its upstream, so the current value of the remote-tracking branch
is always used; missing previous values only make the answer more
conservative.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
After rebasing a stack of branches, every branch of the stack has to be
force-pushed, and so far the only way to do that in lazygit was to check
out each branch in turn and push it. For a stack of a dozen branches
that is a lot of work for a routine task.
When the current branch is pushed and there are branches below it in the
stack that have commits to push, show a menu that offers to push them
along with it. The menu lists the branches and how far each of them has
diverged from its remote branch, so that the user can see what is about
to happen. It doesn't show where each branch goes (i.e. what its
upstream branch's name is or on which remote it is stored); the branches
panel doesn't show that for a normal push either. If any of the branches
has diverged from its remote branch, a single confirmation covers
force-pushing all of them (listing exactly the ones that need
force-pushing).
This only covers branches that already have an upstream configured,
because a branch that was never pushed yet
can't be told apart from one that is meant to stay local. This means
that the very first time you want to push a newly created stack, you
still need to do it manually the old way. We can see if we want to
improve this somehow in the future, but repeatedly pushing a rebased
stack is the more frequent operation, and that's what we improve here.
Pushing the current branch on its own still runs a bare `git push`, so
users who rely on `push.default` or `remote.<name>.push` for it see no
change. The push is non-atomic, as git defaults to; if one branch's
lease fails, the others still go through and the error names the one to
look at.
Some repositories are configured to reject pushes of more than x
branches at once; for those, the command fails with an error. We could
be smarter about this, detect the error, and fall back to pushing each
branch one by one, but I first want to see how many reports we get about
this before investing in the extra logic.
WrapViewLinesToWidth counted the characters of ANSI escape sequences as
if they were visible, so colored text wrapped earlier than the view
does, and the number of lines it reported was too high. In a narrow
terminal the divergence in the menu that offers to push a stack of
branches, colored yellow, ended up on a line of its own even though it
fitted. The tooltip of a disabled menu item, whose prefix is red, gets
its height from the same function.
Skip escape sequences when measuring the width, and never break a line
inside one. gocui wraps parsed cells and never sees escape sequences, so
this brings the two in line; the test's parity check now compares the
wrapped lines with the escape sequences stripped.
Only CSI sequences are recognized. Those are the color and style codes
that lazygit puts into view content; hyperlinks (OSC 8) only occur in
the main view, and gocui wraps that one itself.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
After rebasing a stack of branches, every branch of the stack has to be
force-pushed, and so far the only way to do that in lazygit was to check
out each branch in turn and push it. For a stack of a dozen branches
that is a lot of work for a routine task.
When the current branch is pushed and there are branches below it in the
stack that have commits to push, show a menu that offers to push them
along with it. The menu lists the branches and how far each of them has
diverged from its remote branch, so that the user can see what is about
to happen. It doesn't show where each branch goes; the branches panel
doesn't show that for a normal push either. Pushing only the current
branch is the second entry. If any of the branches has diverged from its
remote branch, a single confirmation covers force-pushing all of them.
A branch is offered if its tip is a commit of the current branch that
isn't merged yet, it has an upstream that is stored locally, that
upstream is not gone, and it is ahead of its push destination. Branches
without an upstream are left out because a branch that was never pushed
can't be told apart from one that is meant to stay local. A branch that
is only behind is left out because pushing it would move the remote
branch back to an older commit; the lease doesn't catch that when the
remote-tracking branch is up to date.
Each branch is pushed to where `git push` would push it if it were
checked out, using the destination git reports in the %(push) field.
This honors push.default, remote.pushDefault and
branch.<name>.pushRemote without lazygit having to interpret them.
Branches going to the same remote are pushed in one command, with
--force-with-lease when the user confirmed force-pushing; the lease
checks each ref against its remote-tracking branch, so a coworker's
unseen push is still rejected. The current branch joins that command
when its remote-tracking branch is stored locally. Otherwise it needs a
plain push first, for example with --set-upstream, and that option
would apply to every refspec of a combined command; so in that case it
is pushed on its own as before, and the other branches follow in a
second command.
Pushing the current branch on its own still runs a bare `git push`, so
users who rely on push.default or remote.<name>.push for it see no
change. The push is non-atomic, as git defaults to; if one branch's
lease fails, the others still go through and the error names the one to
look at.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Pushing the current branch has three cases: it has an upstream, it has
none but push.default is "current", or the user is prompted for one.
Each case ends in a push, and the first one also checks whether a force
push is needed. Let the three cases call a common callback instead, and
put the check and the push there. This makes it possible to run the same
three cases with a different callback, so that the branches stacked
below the current one can be pushed along with it.
The check returns false for a branch without an upstream, so the other
two cases behave as before.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
lazygit will offer to push these along with the current branch, so that
a rebased stack can be pushed in one go. The commits panel already marks
the tips of stacked branches, and this uses the same criterion. A branch
is below the given one if its tip is one of the loaded commits of that
branch that isn't merged into a main branch. This needs no git command.
In whole-graph mode the commit list also contains commits of other
branches, but those are marked as merged, so they don't count.
Not used yet.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
PushOpts can only describe a push of the current branch. It takes the
branch's name and the upstream to push it to, and builds a single
refspec from them. Pushing several branches in one command needs one
refspec per branch, so let callers pass the refspecs themselves. The
sync controller, the only caller so far, builds the same single refspec
that PushCmdObj built before.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
To push a branch other than the checked-out one, lazygit has to name the
remote and the remote branch in the push command; a bare `git push` only
works for the current branch. The upstream isn't always the right
destination. In a triangular workflow the branch is pushed to a
different remote than it pulls from, and with push.default set to
"current" it goes to a branch of the same name whatever the upstream is
called.
Read the destination from git instead of working it out from the config.
The %(push) field of for-each-ref names the remote-tracking ref that a
push would update, taking push.default, remote.pushDefault and
branch.<name>.pushRemote into account. It is also the ref that the
push:track counts are computed against, so the force-push detection and
the destination agree. The field is available since git 2.5, well before
the oldest version lazygit supports.
Nothing uses the new fields yet.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Make it possible to override `gui.theme` colors for light or dark
backgrounds, by setting them in `gui.darkTheme` or `gui.lightTheme`,
respectively; this is often necessary when there isn't a single color
that looks good in both.
Use this to provide better defaults for the background color of a
selected line, and to add a color for the background of an inactive
selected line (used in unfocused views), which didn't have one by
default.
Also, provide a way to turn off the "bold" highlighting of the selected
line, which was hard-coded and couldn't be changed; there's a new config
setting `gui.theme.selectedLineFgColor` that is `[bold]` by default (so
existing behavior is unchanged), but can be set to `[default]` to remove
the bold. This addresses #2304.
The text of the selected line is always bold. Some users don't like
this (#2304), but there is no way to turn it off. Setting
selectedLineBgColor doesn't help. Its attributes apply to the text too,
so it can add bold, but it can't take it away.
Add gui.theme.selectedLineFgColor for the text of the selected line, in
focused and unfocused views alike. Its attributes are added to those of
the text, and a color replaces the colors of the text. It is [bold] by
default, so nothing changes unless you set it; 'default' leaves the
text as it is.
Putting bold into the default of selectedLineBgColor instead wouldn't
work well. To turn it off, you would have to replace the whole list, and
lose the color that is computed from the terminal's background.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
gocui draws the palette colors 0 to 7 on the selected line in their
bright variants. This was meant for the blue highlight on a dark
background, but in most dark palettes the bright variants are so close
to the normal ones that it's barely visible. Elsewhere it makes the text
harder to read. In many palettes, the bright variants are lighter, and
they don't work on the light highlight of a light background. Solarized
maps most of its bright colors to its grays, so colored text on the
selected line turns gray.
Draw the text of the selected line in the same colors as on the other
lines.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
On a light background, the selected line is black text on the palette's
blue. With most palettes, this is hard to read. Light palettes make all
their colors dark enough to read as text on the light background, so
none of them works well as a background for text.
On a light background, mix 25% of #0064ff into the terminal's background
instead. On white, this gives #bfd8ff. The colored text on the selected
line then stays as readable as it is elsewhere.
On a dark background, keep the palette's blue. Dark palettes make it
dark enough to work as a background, and it keeps working on terminals
with only 8 colors. There, a color mixed from a dark background would
turn into black.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The borders of inactive windows are drawn in the terminal's default text
color, so they are as prominent as the text inside the windows. Draw
them in faint text instead. The terminal shades faint text toward its
background, so this works on dark and light backgrounds alike, and also
on backgrounds that are neither black nor white. The titles of inactive
windows use the same color, so they are dimmed too.
Terminals that don't support faint text draw the borders in the default
color, as before.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Some theme colors can't have one default that suits both dark and light
backgrounds. A gray background for the selected line of an inactive
view has to be lighter than the terminal's background if that is dark,
and darker if it is light.
Give such fields a default for each kind of background. Derive it from
the terminal's background color if the terminal tells us, so that it
keeps the same distance from the background however dark or light that
is, and takes on its tint. Otherwise, assume a black or white
background.
These defaults can't be the defaults of gui.theme. We would then have
to tell whether a value there came from the user or from the built-in
defaults, because only the user's value should win over a background
default. Keep them apart from the user config instead, and leave these
fields empty in the defaults of gui.theme, so that a value there always
comes from the user. Tests ensure that no field has both kinds of
defaults, and that both kinds of background set the same fields.
Start with inactiveViewSelectedLineBgColor: the background mixed with
30% white if it is dark (#4d4d4d on black), or with 15% black if it is
light (#d9d9d9 on white). A gray background shows where the selection
is in a view without the focus more clearly than the bold text we used
so far.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
While bisecting, the hashes of the commits outside the bisect range are
black. On a dark gray background this makes them recede, but on a black
one they are invisible, and on a light one they stand out more than any
other hash.
Draw them in faint text instead. The terminal shades faint text toward
its background, whatever that is.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The faint attribute makes text recede on dark and light backgrounds
alike, without having to pick a gray for each. Let users use it in the
theme.
Some theme colors go through both GetTextStyle and GetGocuiStyle, so
both have to know it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Config.md lists strikethrough as a modifier for theme colors, but only
GetTextStyle knows it. GetGocuiStyle turns an unknown name into white,
and white OR-ed with a palette color is white. So if you set a border
color to [red, strikethrough], you get a white border without
strikethrough. The same goes for the parts of the selected line,
options text and default text colors that gocui draws.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A later commit shows the hashes of commits outside the bisect range in a
dimmer variant of the default text color. A darker shade of a terminal
palette color can't be derived, because we don't know what the palette
is, so leave the shading to the terminal and use its faint attribute,
SGR 2. In gookit/color that attribute is called OpFuzzy.
Terminals that don't implement SGR 2 render the text in its normal color.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A color that reads well on a dark background can be hard to read on a
light one, and the other way round. If you switch your terminal between
dark and light, there is often no single set of theme colors that works
for both (#4366).
Add two overrides of gui.theme, one for each kind of background.
gui.colorScheme, or else what the terminal tells us, decides which one
applies. A field that is set in the override replaces the one in
gui.theme. Author colors and branch color patterns are merged by entry
instead, so that an override doesn't have to repeat the entries it
doesn't change.
When the terminal's background changes, re-apply the theme and
re-render all views, not only the ones that show author colors.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
We are about to add gui.darkTheme and gui.lightTheme, with the same type
as gui.theme. The schema generator stores a struct type as one
definition that all its properties refer to, and setDefaultVals writes
the defaults of each path into that definition. The overrides would
then claim the defaults of gui.theme, both in the schema and in
Config.md.
Give each property whose struct definition is shared a copy of its own.
In Config.md, print only the description of every copy after the first,
so that the fields aren't listed several times.
Nothing in the config shares a struct definition yet, so the generated
files don't change.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Since gui.colorScheme exists, the name reads as if the function set that
config. That gets more confusing once gui.colorScheme decides which
theme the function applies.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
We are about to add overrides of gui.theme for dark and light
backgrounds. Author and branch colors need them too, because a color
that reads well on a dark background may be hard to read on a light
one. Move them into gui.theme, so that the overrides cover them without
a mechanism of their own.
The migration of gui.branchColors creates gui.branchColorPatterns, so it
now has to run before the moves.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If several patterns in gui.branchColorPatterns match a branch, the color
it gets is picked at random, and it can change from one render to the
next. The patterns are kept in a Go map, and Go randomizes the order in
which a map is iterated.
Keep the patterns in a list instead, in the order in which they are
written, and let the first match win. If a repo's config file has
patterns too, put them in front of those of the global config file,
because they are more specific.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
gui.branchColors has been deprecated in favor of gui.branchColorPatterns
since 0.44.0. We are about to move gui.branchColorPatterns into
gui.theme, and the deprecated key would have to move along with it.
Migrate it instead, so that we can remove it.
gui.branchColors matched its keys against the part of a branch name
before the first slash. The pattern ^<key>(/|$), with the key escaped,
matches the same branches.
If gui.branchColorPatterns is set, gui.branchColors has no effect; in
that case the migration removes it. This check is done per file. So if
the global config sets gui.branchColorPatterns and a repo config sets
only gui.branchColors, the repo's colors were ignored so far, and now
they apply.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Renderers like delta and difftastic pick their colors for either a dark
or a light background, and they can't find out which one the terminal
has, because lazygit runs them with TERM=dumb, and in a pty that doesn't
answer their queries.
Add `{{colorScheme}}` to the commands of diff renderers. It is 'dark' or
'light', based on what the terminal reports (which can be overridden by
`gui.colorScheme` if the terminal doesn't support the query). It can be
passed to delta as `--{{colorScheme}}` and to difftastic as
`--background={{colorScheme}}`; other renderers can choose between
options with a template expression.
Renderers like delta and difftastic pick their colors for either a dark
or a light background, and they can't find out which one the terminal
has. Lazygit runs them with TERM=dumb, in a pty that doesn't answer
their queries. So the colors come from the config, and when the
terminal switches between dark and light, the diff keeps the ones it
has.
Add {{colorScheme}} to the commands of diff renderers. It is 'dark' or
'light', going by gui.colorScheme, or by the terminal if that is
'auto'. It can be passed to delta as --{{colorScheme}} and to
difftastic as --background={{colorScheme}}; other renderers can choose
between options with a template expression. When the terminal switches
between dark and light, render the diff again.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The next commit needs to render the diff again when the terminal
switches between dark and light, with the same care not to replace
whatever else the main view might show.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The command of a diff renderer can refer to values like the width it
renders at, as {{width}}. They are filled in by plain replacement, so a
command can't choose between options depending on them. The next commit
adds a value that needs this: whether the terminal is dark or light.
delta takes --dark or --light, but for other renderers the choice has to
be spelled out differently, for example as the name of a syntax theme.
Resolve the command as a Go template instead. The values become its
variables, so that {{if gt .width 160}} --side-by-side{{end}} works too.
To keep the existing commands working, a variable can still be written
without the leading dot.
A mistake in a template, such as a misspelled variable, now makes
resolving the command fail, instead of leaving the placeholder in it.
Check the commands when the config is loaded, by resolving each of them
with made-up values, so that the mistake shows up as an invalid config.
This also rejects a variable that the kind of renderer doesn't have,
such as {{columnWidth}} in the command of an external diff; until now,
it reached the renderer as it was.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The getters for the stdin filter and the external diff command each
take the values they fill in as parameters of their own, and each
builds the placeholders for them. The next commit checks the commands
when the config is loaded, and for that it needs to resolve a command
whatever its kind. A value that both kinds can use comes after that.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Lazygit automatically picks random colors for the authors in the Commits
log. On a dark terminal theme, many of these were too dark and barely
readable; this can also be seen in the demo videos on the lazygit entry
page. Improving this is not trivial, because a range of colors that
looks good on a dark background comes out too pale on a light
background.
To improve this, detect the terminal's background color (with a config
override for those terminals that don't report it), and pick different
ranges of colors depending on that. In later PRs we will use the same
background detection to allow passing `--dark` or `--light` to a diff
renderer, and to support different `gui.theme` configurations for light
and dark.
While at it, fix the problem that the `gui.authorColors` config for
manually overriding some of the random colors didn't update on a config
reload.
The colors that lazygit derives from the names of authors are picked
for a dark background. On a light one, they are too pale to read;
against white, every author has a contrast ratio between 2.2:1 and
3.5:1.
Now that lazygit knows whether the terminal is dark or light, pick them
from a darker range of lightness when it is light. Against white, the
contrast ratio is now between 5.2:1 and 9.2:1, and against the
background of Solarized Light between 4.8:1 and 8.5:1. On a dark
background, nothing changes. If the terminal switches between dark and
light while lazygit is running, draw the commits again in the new
colors.
Add gui.colorScheme for terminals that don't tell us, and for anyone
who wants to override what they tell. It is 'auto' by default; 'dark'
and 'light' ignore what the terminal says.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If gui.authorColors names no color for an author, lazygit picks one
from a hash of their name, at an HSL lightness between 0.4 and 0.6.
HSL lightness says nothing about how bright a color looks, though. At
0.5 a yellow is glaring and a blue is nearly black, so whether an
author's initials can be read comes down to where their name happens
to hash to. Against a background of #1e1e1e, 45% of four thousand
names fall below a contrast ratio of 4.5:1 and 21% below 3:1, with the
worst at 1.46:1. Several issues have been raised about author colors
being too dark to read.
Use HSLuv instead. Its lightness tracks perceived brightness, so the
range can be narrow now that a number in it means something. Against
#1e1e1e, every author now lands between 4.7:1 and 7.7:1, so no name is
unlucky any more.
This changes the color of every author who isn't named in
gui.authorColors. On a light background, the new colors are uniformly
too pale, where before they were mostly too pale. The next commit gives
a light background a range of its own.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If gui.authorColors names no color for an author, lazygit derives one
from a hash of their name. Checking whether these colors are readable
means looking at a repository, but the authors of a real one rarely
land near the edges of the range, so the worst cases go unseen.
Add cmd/author_colors_repo. It searches for names at the lowest and
highest lightness and saturation, at twelve hues, and commits once as
each of them. The names depend only on the hashing, so the same
repository shows the colors of any lazygit build and can be kept
around to compare them.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The next commit adds a tool that creates a repository of authors at
the edges of the range their colors are picked from. To find such
names, it needs to know where a name lands in the range, and it
shouldn't keep a copy of the hashing that could drift from this one.
Later commits test the colors, and need the colors themselves for that
rather than the styles made from them.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
When the config is reloaded, SetCustomAuthors replaces the styles of
authors, but the initials and names that were rendered with the old
styles stay cached. So do the pipes of the commit graph; each of them
carries the style of the author of the commit it starts at.
Drop these whenever the colors of authors change. The graph's cache
finds out by itself, by comparing a version number, so that nothing
has to remember to reset it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If gui.authorColors changes while lazygit is running, the authors that
are already on screen keep their old colors, both in the author column
and in the commit graph.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The styles from gui.authorColors and the ones derived from the names
of the other authors share a map, so the derived ones can't be dropped
without the configured ones. A later commit needs to drop the derived
ones on their own, when the terminal switches between dark and light.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Lazygit doesn't know whether the terminal it runs in has a dark or a
light background. The colors of authors, for example, have to suit one
or the other, and are too pale to read on a light background.
Ask the terminal. Many terminals answer CSI ? 996 n with whether they
are dark or light, and send the same report again whenever that changes
while mode 2031 is on. Terminals differ in what they base this on,
though. kitty goes by its background color, but Ghostty goes by the dark
or light mode of the operating system, even with a theme that doesn't
follow it. So also ask for the background color with OSC 11. If the
terminal answers that, the background decides, and a report only makes
us ask for the background again. Some terminals answer OSC 11 but send
no reports; ask these for the background again whenever the terminal
gains focus.
Turn mode 2031 off whenever lazygit hands the terminal to another
program, so that the program doesn't receive the reports as typed text.
For the same reason, first wait for the answers to any queries that are
still outstanding, but for no longer than half a second. Locally, the
answers take a few milliseconds at most, but over ssh they take a
network round trip, and focusing the terminal and then pressing a key
that starts an editor fits into that.
Leave out the terminals that tcell doesn't send its own queries to,
except for Terminal.app and WezTerm; these are only asked for the
background color.
This doesn't make startup any slower. tcell sends its own queries in
Screen.Init and waits for the terminal to answer them. Ours go out just
before, so their answers arrive before tcell stops waiting, and the
color scheme is known before the first layout.
tcell has no support for any of this, and drops the answers when it
parses its input. Instead of adding support to tcell, wrap the tty that
tcell reads from and watch the input as it goes by.
For now, lazygit only writes the color scheme to the debug log.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
On the Windows CI job,
TestStartPipelineReadsWhatTheCommandsComplainAbout fails now and then
because the output it reads has an extra line after the expected one.
The line starts with "error: coverage meta-data emit failed" and ends
with "The process cannot access the file because it is being used by
another process."
The pipeline tests run the test binary itself as the members of the
pipeline. CI builds it with -cover, and the members inherit GOCOVERDIR
from go test, so each of them writes coverage data to that directory
when it calls os.Exit. The meta-data file has the same name for every
process of one binary, and every process replaces it by renaming a new
copy onto it. (Go's check for an existing file compares its size against
the wrong length, so it never finds one.) On Windows this rename fails
if another process holds the file open. In this test both members exit
at the same time, and the runtime prints the failure to stderr.
StartPipeline puts every member's stderr into the output that the test
compares.
Exit the members with syscall.Exit instead. It skips the runtime's exit
hooks, so the members write no coverage data at all. Nothing is lost by
this. Their coverage data went to a temporary directory of go test, not
to the directory that CI uploads.
This fixes a regression introduced with #6025.
On the Windows CI job,
TestStartPipelineReadsWhatTheCommandsComplainAbout fails now and then
because the output it reads has an extra line after the expected one.
The line starts with "error: coverage meta-data emit failed" and ends
with "The process cannot access the file because it is being used by
another process."
The pipeline tests run the test binary itself as the members of the
pipeline. CI builds it with -cover, and the members inherit GOCOVERDIR
from go test, so each of them writes coverage data to that directory
when it calls os.Exit. The meta-data file has the same name for every
process of one binary, and every process replaces it by renaming a new
copy onto it. (Go's check for an existing file compares its size against
the wrong length, so it never finds one.) On Windows this rename fails
if another process holds the file open. In this test both members exit
at the same time, and the runtime prints the failure to stderr.
StartPipeline puts every member's stderr into the output that the test
compares.
Exit the members with syscall.Exit instead. It skips the runtime's exit
hooks, so the members write no coverage data at all. Nothing is lost by
this. Their coverage data went to a temporary directory of go test, not
to the directory that CI uploads.
The test was added in dfd6a7dbf2.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
In #5740 we implemented PTY support for Windows; back then we thought
this is a prerequisite for supporting custom diff renderers (which were
still called "custom pagers" back then), because git will only use the
GIT_PAGER env var when it is running in a PTY. The problem is that the
Windows PTY, being based on ConPTY, does not behave like a Unix PTY,
which basically just passes through all data from the client. ConPTY
renders what it receives from the client into its own screen buffer, and
then re-encodes it from there for the terminal side. This has already
caused problems that are awkward to work around (e.g. ConPTY will
convert a series of multiple blank lines to a cursor positioning escape
sequence, so we need to parse that and convert it back, see
180fe0cd26); but now, with the upcoming OSC 1717 work, it turns out
that it's impossible to attach OSC 1717 metadata records to the cells
they belong to, because ConPTY sends those immediately to the terminal,
but the rest of the cell data some time later, and it's impossible to
reconstruct the original stream.
So use an ordinary pipe on Windows, where we start git and the diff
renderer on our side instead of telling git to drive the renderer. It's
a shame that we didn't realize it's possible; we could have done this
years ago without having to wait for a working Windows PTY.
One downside is that the diff renderer can no longer ask the terminal
how wide it is, so if it needs to know that (e.g. for a side-by-side
diff, or for horizontal lines that should be as wide as the view), then
it needs another way to find out. We set the `COLUMNS` environment
variable, which delta, difftastic and diff-so-fancy all support in their
latest versions, and for those renderers that don't, we provide a
`{{width}}` template variable that can be used in a diff renderer
command to pass it as a command-line argument.
Renders were kept from refreshing git's index because a pty-rendered
command on Windows is terminated at an arbitrary instruction when its
task stops, and one landing in the window where git holds index.lock to
write back refreshed stat information leaves that lock behind.
A render no longer runs in a pty there, and nothing kills it any more
either: the pipe to the renderer breaks, git's write fails, and git dies
through its own die path with its lock files cleaned up. So let the
refresh happen, and let renders heal stale stat info the way they do
everywhere else.
The teardown of a pseudoconsole took its reassurance about index.lock
from this, and renders were the reason it held. What still runs in a pty
there is a custom command asking for logWithPty and a command that may
be asked for a credential, so the claim no longer follows; drop it
rather than restate it for clients it was never about.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
ConPTY doesn't carry a diff renderer's output to us as the renderer
wrote it. It parses the output into a screen buffer and re-encodes that
for the terminal side, and a sequence it can't represent there goes out
the moment it is parsed, separately from the text around it. The OSC
1717 records a renderer states its diff lines in therefore arrive
detached from the rows they describe, and the identity layer attributes
rows to the wrong diff line or to none.
Feed the renderer through a pipe there instead, so that its bytes reach
us unaltered. A stdin filter becomes a command of our own, since git
only invokes the one named by GIT_PAGER when it talks to a terminal; an
external diff renderer is git's own business either way and needs
nothing but the pipe.
Unix keeps the pty. A renderer reads the width to lay out to off it, so
taking it away would leave every configuration that doesn't name a
width rendering at whatever the renderer falls back to, and diff
renderers have worked on Unix far too long for that.
LAZYGIT_RENDER_WITHOUT_PTY asks for the piped path anyway, which is how
the integration tests cover it on a platform where they run at all.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
LAZYGIT_COLUMNS told a diff renderer script the width of the view at a
time when a render on Windows ran without a pty, so that the script had
nowhere else to read it from. It was documented for that case only, and
the documentation went when Windows gained a pty; it has not been
mentioned since.
COLUMNS now tells every command rendering into a view the same thing,
in the variable git and the common renderers already read, and the
{{width}} template variable covers a renderer that reads neither. The
value LAZYGIT_COLUMNS carried was also the width before the layout
pass, which is not always the width the view ends up with.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Tell a command that renders into a view how wide that view is, through
COLUMNS. git reads it in preference to the size of the terminal it is
talking to, so the diffstat now fills the view whether or not the render
has a terminal to offer.
A diff renderer that can't ask a terminal gets the width from it too;
difftastic, diff-so-fancy and delta all support COLUMNS, so we can stop
running git in a PTY and these will still work.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
git scales the graph of a diffstat to the width of the terminal it is
talking to. A render that talks to no terminal tells it no width, so the
stat comes out narrower than the view it is shown in, wasting most of a
wide one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The task runs a command with its output shown through the configured
diff renderer. A pty is one way of getting the output to the renderer,
and is about to become one of two, so the task can no longer be named
after it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A render is about to have a second way of giving the diff renderer the
command's output, so the part that decides how it runs needs to be
apart from the part that does.
Move the setting up to newRenderTask, named for what it does now that a
pty is one of two ways of doing it. Leave the pty with the pair of
functions a task drives it by, and with naming the stdin filter to git
as its pager, since git only runs a pager when it talks to a terminal.
What a way needs to know about the render it runs travels as a
renderSpec.
Running the command plainly, with its output going straight into a
pipe, is a way of its own already, and newCmdTask ends as newRenderTask
does, by creating the task that reads the output into the view. Put the
plain way on the same seam as plainRender, and share the ending as
newTaskForRender.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Like a stdin filter, an external diff program lays out its rendering to
the width it reads off the terminal, and a render through a pipe leaves
it nothing to read. difftastic in side-by-side mode is the case that
shows it.
Offer the width as the {{width}} template variable, the same name the
stdin filter command takes it by. Since difftastic supports the COLUMNS
variable, which we will set later in this branch, and I don't know of
any other external-diff renderer that doesn't, we don't document this.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
An external diff command rides on the git command as a diff.external
config, which means it is fixed when the command is built. That is
before the layout pass, so the width the renderer is to lay out for
isn't known yet, and the command can't be told about it.
Pass it as GIT_EXTERNAL_DIFF from the render instead, where the width
is known and where a stdin filter is already handed to git the same
way. git ranks the variable exactly as it ranks the config, behind a
per-path diff driver from .gitattributes, so a repository that defines
one still gets it (verified on git 2.22.5 and 2.55). An empty command
means the user wants their own git config to apply, so leave the
variable unset for that; git takes it being set at all as an
instruction.
The renderer command leaves the git arguments, so it also leaves the key
that says which diff a render is of. Cycling between two external diff
renderers now keeps the view's place, the way cycling between two stdin
filters already does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A stdin filter finds out how wide to lay out its rendering by asking the
terminal. That is one of the two jobs the pty around a render does.
Rendering through a pipe instead, as Windows is about to do, leaves the
renderer to pick a width of its own, and a side-by-side rendering comes
out at the wrong size.
Offer the width as the {{width}} template variable, so that a
configuration can name it on the command line where the renderer can no
longer ask for it. {{columnWidth}} is derived from the same number.
This is only needed by diff renderers which don't support the COLUMNS
variable, which we will set later in this branch; delta and
diff-so-fancy both do in their latest versions, so we don't document
this.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Rendering a diff through a renderer on Windows means running the
renderer ourselves, since ConPTY mangles the metadata records it emits
and git only invokes a renderer of its own when it talks to a terminal.
That needs a chain of commands whose output a view can be filled from
while it runs, where PipeCommands runs a chain to completion and reports
what it said afterwards.
StartPipeline starts such a chain and hands back the reader for its
output, along with a handle offering exactly what a render task asks of
a command: something to wait for, something to name it by, and a way to
stop it. Every command's stderr joins the output, so a renderer that
objects to its input says so where the diff would have been.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
If a command in a pipeline exits before reading all of its input, the
command feeding it keeps running and PipeCommands never returns.
The parent holds on to the read end of every pipe it wires between two
commands. A pipe with a reader is a pipe worth writing to, so the
command writing into it is never told that nobody is listening.
Close the parent's ends once the commands are running, since each of
them holds its own by then. The write ends have to go as well, or the
command reading a link never reaches the end of its input.
No caller reaches this today. The one chain lazygit pipes is
`git stash show -p` into `git apply -R`, and apply reads its whole input
before it does anything with it, so it never leaves the show writing to
nobody. The chain about to be added for diff renderers is a different
matter: a renderer can fail at any point of its input, and a render that
is no longer wanted is stopped part way through by design.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
PipeCommands runs a chain of commands to completion and gathers what
they wrote to stderr. Rendering a diff through a renderer needs the same
chain, but has to read the last command's output as it arrives, so it
can't use PipeCommands as it stands.
Pull out what both need: naming the chain for a log, wiring each
command's output to the next one's input, and starting them all with the
cleanup a failure to start requires.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When lazygit starts up in a repo with many remote branches, the pull
request icons in the branches panel showed up a good while after the
branch list itself, even though the pull requests come from the cache
file and are in the model before the first render. In the repo where
this showed up (5400 remote branches) the icons were up to half a second
late.
The icons are rendered from Model.PullRequestsMap, and that map is built
from the remotes' URLs, because a branch's upstream remote tells us
which repo owner's pull requests to look for. The map therefore stays
empty until the remotes are in the model, and the remotes refresh
doesn't put them there until it has also enumerated and sorted all
remote branches. In a big repo that takes hundreds of milliseconds;
reading the remotes themselves takes ten.
Load the two separately, and put the remotes in the model as soon as
they have been read from the git config. The branches refresh then finds
them there, and the pull request icons are part of the first render of
the branch list.
The pull request icons in the branches panel come from the remotes, so a
branches render that happens before the remotes are in the model shows no icons,
and the render that follows once the remotes land has to add them. The branches
refresh already waits for the worktrees for exactly this reason.
Wait for the remotes as well. They are read from the git config before their
branches are loaded, so the wait is over well before the branch load itself is
done, and the first render of the branch list shows the icons no matter which of
the two finishes first.
Start the remotes scope before the branches scope, so that an early return in
performRefresh can't leave the branches refresh waiting for a scope that was
never started. The worktrees scope goes first for the same reason.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When lazygit starts up in a repo with many remote branches, the pull request
icons in the branches panel show up a good while after the branch list itself,
even though the pull requests come from the cache file and are in the model
before the first render. In the repo where this showed up (5400 remote
branches) the icons were up to half a second late.
The icons are rendered from Model.PullRequestsMap, and that map is built from
the remotes' URLs, because a branch's upstream remote tells us which repo
owner's pull requests to look for. The map therefore stays empty until the
remotes are in the model, and the remotes refresh doesn't put them there until
it has also enumerated and sorted all remote branches. In a big repo that takes
hundreds of milliseconds; reading the remotes themselves takes ten.
Load the two separately, and put the remotes in the model as soon as they have
been read from the git config. The branches refresh then finds them there, and
the pull request icons are part of the first render of the branch list.
Carry over the branches of the remotes we already have in the model in that
first update, so that the remote branches, and the branch counts in the remotes
panel, stay in place until the fresh ones are loaded.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When only one file inside a nested folder has changes, the files panel
shows the whole path to it on a single line:
```
▼ a/b/c
M file.txt
```
Selecting that line shows the diff of everything below it, in this case
the entire working tree. As soon as a second file changes in a different
folder, the panel splits that line up:
```
▼ a/b
▼ c
M file.txt
▼ d
M other_file.txt
```
Until now, the selection moved down to `c` in this situation, so the
main view suddenly showed only the diff of that folder. Now the
selection stays on the outer folder, `a/b` here. That is the same line
as before, and it still shows the diff of everything. This is most
useful if you like to keep the top folder selected to always see the
diff of the whole working tree; the same rule applies to folders further
down the tree. The reverse case, where two folders fold back into a
single line, already kept the selection on that line.
Along the way we also fixed two small bugs in how the selection follows
a rename after a refresh; see the individual commit messages for
details.
When a single file is modified inside a nested directory, the file tree
compresses the whole chain of directories into one line, such as
"pkg/gui/controllers/helpers". Selecting that line shows the diff of the
entire working tree. When a second file is then modified in another
subdirectory of pkg/gui, the tree splits the line into "pkg/gui" with
"context" and "controllers/helpers" below it, and the refresh moves the
selection down to "controllers/helpers". Users who keep the top
directory selected to see the diff of everything lose that view and
have to move the cursor back up after every such refresh.
This happens because the selection is re-found by the node's own path,
and a compressed node's path is the deepest directory in its chain. The
node stood for every directory in that chain, though, and the topmost
piece of the split is the one that stays on the same line.
Match a compressed directory node against any new node that stands for
at least one of the same directories. The list is in depth-first order,
so the topmost piece wins and the cursor stays on its line. Files are
never compressed, so their handling doesn't change. The reverse case,
where two directories fold back into one compressed line, already
selected the merged line and still does.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
When the deletion of the selected file is staged and git then reports
it as the old half of a rename whose new half sits in a collapsed
directory, the selection is meant to move to the rename. With
gui.showRootItemInFileTree turned on, the directory stays collapsed and
the selection lands on it. With the option turned off, the directory
expands, but if another file in it sorts before the rename, that file
gets selected.
The loop that expands the directory runs before the tree is rebuilt and
works on the file list instead of on tree nodes. It compares the
rename's previous path, a user-facing path, against the selected node's
internal path, so the two never match while the root item is shown. The
path it hands to ExpandToPath is user-facing as well, so the directory
would stay collapsed either way. And because the loop runs before the
old node list is captured, expanding a directory above the selection
shifts that list, and the search for the new selection starts from
whatever node moved into the selected line.
Rebuild the tree first, capture the old node list before anything
expands, and then look for the rename among the leaves of the new tree.
ExpandToPath gets the leaf's own internal path, so the two kinds of
paths never need converting.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
When the deletion of the selected file is staged and git then reports
it as the old half of a rename whose new half sits in a collapsed
directory, the selection is meant to move to the rename, expanding the
directory on the way. With gui.showRootItemInFileTree turned on, the
directory stays collapsed and the selection lands on it instead. With
the option turned off, the directory does expand, but if another file
in it sorts before the rename, that file gets selected.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
When the selected rename splits into its two halves, e.g. because it was
unstaged, the selection is meant to move to the new half. With the
default setting of gui.showRootItemInFileTree, it lands on the file that
follows the rename in the list instead.
findNewSelectedIdx identifies a rename by the names of its two halves.
These are user-facing paths, without the "./" prefix that the root item
adds to every internal path, but they were compared against internal
paths. The comparison never matched while the root item was shown.
Compare user-facing paths throughout findNewSelectedIdx. Node.ID already
identifies list items by their user-facing path.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
When a rename is selected in the files panel and then splits into its
two halves, e.g. because it was unstaged, the selection is meant to move
to the new half. This only works with gui.showRootItemInFileTree turned
off. With the default setting, the selection lands on the file that
follows the rename in the list instead.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
It was added in #3751 with the explicit reservation that we remove it
again when it turns out to be annoying. This is actually the case now; I
don't find catching spelling errors valuable enough to warrant the
nuisance of having to silence false positives. (And AI agents don't make
spelling mistakes anyway :-)
It was added in #3751 with the explicit reservation that we remove it
again when it turns out to be annoying. This is actually the case now; I
don't find catching spelling errors valuable enough to warrant the
nuisance of having to silence false positives. (And AI agents don't make
spelling mistakes anyway :-)
With stacked branches it is common to rebase the whole stack in one go,
and when doing that it is likely that all branch tips get the same
committer date (because git's time stamps have a granularity of one
second). We sort branches by committer date by default, and git sorts
branches with the same committer date alphabetically, which causes
stacked branches to be listed out of order.
To improve this, detect groups of branches that share the same committer
date, and sort them by ancestry, so that a branch comes before the
branches it is based on. This takes one extra for-each-ref call (only
when such a group exists), and it requires git 2.41 or later.
Force-pushing a stack of branches puts the same commits on the remote,
so the remote branches panel shows the same alphabetical order for a
stack that the local branches panel did. Sort them by ancestry too,
which needs the tip hash and committer date of each remote branch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Sorting the branches of a remote by ancestry works on the whole list, so
build the list first and group it by remote once it is in the right
order.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It needs the git version to decide whether the ahead-behind format is
available, and GitCommon already carries the common state and the command
builder that the loader used to take separately.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
In date order, the branches panel lists a stack of branches
alphabetically rather than from the top of the stack down. Rebasing a
stack creates all of its commits within the same second, so all of its
branch tips end up carrying the same committer date, and git sorts refs
with equal committer dates by name.
Sort each group of branches that share a committer date by ancestry
instead, so that a branch comes before the branches it is based on.
Branches that are not descended from one another keep the alphabetical
order git gave them. Determining the ancestry takes one more
for-each-ref call, and it only runs when there is a group to sort.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
parseAheadBehindForEachRefOutput dropped fields it couldn't parse, which
left the remaining ones of that line pointing at the wrong bases. The
caller that picks the closest base doesn't care, but sorting refs by
ancestry has to know which base a pair of numbers belongs to. Return an
entry per base and mark the ones that were malformed, as the function's
comment has claimed all along.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The function always asked about every ref under refs/heads. Sorting refs
by ancestry needs the ahead-behind values of a handful of named refs, and
for remote branches those live under refs/remotes, so take the patterns
as an argument. The bases can be commit hashes as well as ref names.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Building and parsing `git for-each-ref --format=%(ahead-behind:<base>)`
is not specific to loading local branches; the commits below use it to
sort refs by ancestry, from the remote branch loader too. Give these
helpers and their tests a file of their own.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The commit list only renders the visible rows for performance reasons
(see #3687), which means it also uses only the visible rows for
determining the widths of the list's columns. In an interactive rebase,
when you scroll down so that no rebase todos are visible any more, the
author and subject columns would snap to the left, which looks ugly and
distracting. A similar thing happened in half-screen mode when only
commits from today are visible: today's commits use a shorter date
format, so as you scroll down to make an older commit visible, the
columns to the right of the date would move to the right to make room
for the longer date.
Fix this by taking the width requirements of _all_ commits into account,
not just the visible ones, and pad the column texts to those widths. For
the date we take a shortcut: measuring the widths of all commits would
be too expensive, so we only format the oldest commit's date, on the
assumption that this one is the least likely to be from today. This only
works when the long time format is actually longer than the short one,
and when the long format always results in the same width for all dates;
both of these assumptions might be false when users reconfigure their
`gui.timeFormat` or `gui.shortTimeFormat` configs (e.g. to include a
week day), but for the default values of these it works.
Pad the date of every line to the width that the oldest entry in the
reflog asks for, so that the column keeps its width as the user scrolls.
This is the same treatment the commits panel's date column gets, with the
same limits; getReservedColumnWidths spells them out.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The reflog panel renders only the lines that are on screen too, so the
expanded panel's date column is only as wide as gui.shortTimeFormat while
nothing but entries from today is visible, and the message of every entry
jumps to the left. A reflog reaches back in time, so scrolling crosses
that boundary soon enough.
GetReflogCommitListDisplayStrings had no tests at all, so cover the two
shapes it can return along the way.
This file is deliberately left un-gofumpt'd: gofumpt indents the body of
the commented-out block by a tab, which would fill the diff of the commit
that swaps the two blocks with whitespace-only changes.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The reflog commits context slices the visible lines out itself and passes
only those, so the function has no way to look at the rest of the list. A
following commit needs the oldest entry to work out how much width the
date column needs. Take the whole list along with the range to render, the
way GetCommitListDisplayStrings already does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
During an interactive rebase, scrolling down far enough that the pending
todos leave the screen makes the author and subject of every commit jump
to the left; scrolling back up makes them jump back. During a bisect the
column that holds "<-- current" and "?" comes and goes the same way, and
in the expanded commits panel the date column is only as wide as
gui.shortTimeFormat while nothing but today's commits is on screen.
A column is as wide as the widest string in it, and a column whose strings
are all empty is dropped altogether. The commits and sub-commits panels
render only the lines that are on screen, so those widths come from the
visible lines alone and follow the scroll position.
Pad the hash, bisect, action and date cell of every line to the width that
all the commits in the list need. A padded cell is no longer empty, so its
column is never dropped, and the column is already as wide as the whole
list needs, so its width no longer depends on what is visible.
The date column is the exception. Formatting the date of every commit on
every render costs too much, so it measures the oldest commit only. That
covers the conventional time formats; getReservedColumnWidths says what it
misses, and why it can never reserve width that no commit asks for.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The commits panel renders only the lines that are on screen, so the width
of a column follows what happens to be visible, and a column all of whose
visible lines are empty disappears altogether. Scrolling past the pending
rebase todos takes the action column away with them, and everything to its
right jumps to the left.
Cover the same problem for two more columns: the hash column, which goes
away while only hashless todos such as "update-ref" are on screen, and the
date column in the expanded commits panel, which is as narrow as the time
format while only commits from today are on screen.
This file is deliberately left un-gofumpt'd: gofumpt indents the body of
the commented-out block by a tab, which would fill the diff of the commit
that swaps the two blocks with whitespace-only changes.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
formatExpected runs the expected output through strings.TrimSpace to get
rid of the newlines that the raw string literal starts and ends with, but
that also eats the indentation of the first line. A scenario whose first
line starts with an empty column can't express what it expects, and a
later commit adds two of those. Trim the newlines only.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A caller that asks for a padding of zero gets its string back unchanged,
but only after WithPadding has measured it, and measuring means a
Decolorise lookup and a width scan over the result. A later commit pads
four cells of every commit in the list, and asks for a padding of zero
for all four whenever no rebase or bisect is in progress and the date
column is hidden, so make that case cost nothing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
These three cells are built and styled in one step, so their width can
only be measured by stripping the styling off again. A later commit needs
those widths to reserve space for the columns they go into. Pull the text
out into getHashText, getActionText and a getBisectStatusText that no
longer styles what it returns, and apply the styling at the call site.
A commit with no hash, such as a "break" or "update-ref" todo, now gets an
empty hash cell instead of one holding nothing but colour codes. Nothing
can see the difference: both render as the same number of blank columns.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Decolorise stores its result in a cache keyed by the string it was given,
but the lookup treats an empty result as a miss, so a string that
decolorises to nothing is recomputed on every call. Recomputing it means
compiling two regexes, and that costs 4534ns against 24.7ns for a string
the cache does answer for.
Empty cells are everywhere in the list panels, and RenderDisplayStrings
measures every cell twice, once to work out the column widths and once to
pad it. A commits panel showing 50 lines with one empty column spends
about 0.45ms of every render on this.
Read the cache with the two-value form, so that an empty result counts as
an answer, and compile the two regexes once at package level.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Several improvements to the Recent Repos menu:
- use the full available width for a menu (previously we would use a
ratio of the window width, which would often be less than the 90
characters that are the default window width)
- truncate long repo/worktree names and long branch names to at most 30
characters, so that all three columns of the menu fit
- abbreviate the home directory in paths to `~`; this is easier to read,
and saves some space
- for detached heads, show "HEAD detached at <sha>" rather than just the
sha, like we do in the worktrees panel
- make detached heads show properly for submodules; these would
previously show "Branch unknown"
- show correct branch name for reftable repos (these would show
".invalid")
Reading HEAD is worth keeping for the repos it can answer for, because
the menu opens on a keystroke and asking git costs a process per entry.
So go to git only for the placeholder, and for anything else the read
can't make sense of. That last part also gets the menu an answer for
layouts we don't know about yet, where it used to give up and say
"Branch unknown".
Git needs two commands to cover every repo. `git symbolic-ref` names the
branch even when it has no commit yet; `git rev-parse` resolves a
detached HEAD, and fails on a branch without a commit.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The recent repos helper is about to run a git command against each repo
in the menu, and it needs the same treatment of GIT_DIR and GIT_WORK_TREE
that everything else pointed at another repo gets.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A repo that keeps its refs in a reftable shows ".invalid" in the branch
column. Git stores the real HEAD in a binary table there and leaves
"ref: refs/heads/.invalid" in the HEAD file, so that anything still
reading the HEAD file fails loudly instead of getting a stale answer.
We read that file and take the placeholder for a branch name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The menu shows "Branch unknown" for every submodule, whatever it has
checked out. A submodule has no .git directory; its .git is a file
naming the directory, and for a submodule git writes that name relative
to the submodule. We hand it to os.ReadFile unchanged, so it resolves
against lazygit's own working directory and the read fails. A worktree
created with --relative-paths (or with worktree.useRelativePaths set)
gets a relative name too, and fails the same way.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A repo with no branch checked out puts a bare short hash in the branch
column, where it reads as a branch name. Spell it out the way the
worktrees panel already does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The next commits change what the recent repos menu shows for a repo
without a branch, and teach it about layouts whose HEAD it reads wrongly
today. Give the reading a function of its own first, one that reports
what it found rather than what to display. This keeps the later changes
apart from each other, and it lets the tests call the reading directly
instead of going through a ReposHelper.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The recent repos menu is about to show the same text for a repo that has
no branch checked out. Hardcoding the English a second time would leave
translators with one of the two copies, so give the text a translation
key and take it from there in both places.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The path column is the last one, so nothing pushes it aside; instead it
runs off the right edge of the menu itself, and the reader has no way of
telling that there is more to it. Give it a maximum width as well, sized
so that the three columns and the spaces between them fill the menu at
its widest.
A path loses its middle rather than its end, because the directory that
immediately contains the repo says more about where it is than the root
of the tree does. The whole path, with the home directory still
abbreviated, joins the names in the tooltip when it doesn't fit.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The recent repos menu is about to size its columns to fit into a menu of
that width.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
TruncateWithEllipsis cuts off the end of a string, which is the wrong
end for a path: what distinguishes two paths is often the last segment,
and it is the one thing the reader wants to see. Keep both ends and put
the ellipsis between them.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Each column of a menu is padded to the width of its widest entry, so a
single long name in the first two columns of the recent repos menu
pushes the path column off the right edge for every entry. Anyone whose
worktree directories are named after their branches hits this: with a
90 column menu and one 42 character name, the path column starts at
column 86 of 88.
Truncate both names to 30 characters, and put the ones that got
truncated into the item's tooltip, so that the full text is still on
screen for the selected entry. Filtering keeps matching the full names
and the full path, which the columns no longer show in their entirety.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The third column of the recent repos menu spells out the full path of
each repo. That repeats the directory name which the first column
already shows, and it writes out the home directory in full. Both are
wasted width in a menu that is limited to 90 columns; the path column is
the first thing to run off the right edge, and users who don't know that
'L' scrolls the menu horizontally never see it at all.
Show the directory that contains the repo instead, with the home
directory abbreviated to '~'. For a list of 106 recent repos this takes
the column from 111 characters down to 97 at its longest, and from 47
down to 28 in the median.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Nothing needs to look up the branch of a repo by its path, so a slice
indexed like the list of paths does the job, and its elements are plain
strings instead of the values of type "any" that a sync.Map hands back.
The next commits measure and truncate the branch name, which needs a
string.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The left and the right edge of a popup panel were each derived by
halving the panel's width, so a panel that asked for an odd width lost a
column and came out one column left of centre. Resizing the window then
moved the panel's right edge only every other column, and left a gap of
one column between the panel and where it should end half of the time.
Derive the right edge from the left one and the width instead, the way
the branch above already does it for a popup that has a parent. This
also means that a panel of an odd width is now as wide as the width its
text was wrapped to.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The width of a popup panel was a ratio of the window's width, capped at
the panel's maximum. The ratio never did anything for confirmations and
prompts, whose minimum and maximum widths are both 80; they always came
out at 80, or at the window width if that was narrower. For menus and
the commit message editor it meant that the window had to be 158 columns
wide before either of them reached its maximum width, and that below 140
columns they were 80 columns wide. This is narrower than the window has
room for, and too narrow for the three columns of the recent repos menu.
Give every panel the width it asks for as long as it fits, and shrink it
only when the window leaves no choice. A panel keeps a margin of three
columns on either side while it can afford to, so that it doesn't sit
flush against the sides of the window as soon as the window gets a
little narrow.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
When performing an interactive rebase, a child process of lazygit is
started as a rebase-todo editor, and sets (for example) the todo to
"edit" that you want to stop at. This child process would load the user
config as a normal lazygit does, and try to migrate it if it's out of
date. This is a problem when you maintain your dot files including
lazygit's config file in a git repo; if you rewrite the history of that
repo, and stop at a commit before the last config migration, the child
process tried to migrate the config mid-rebase, leading to confusing
behavior. Avoid this; there's no reason for the child process to load
the user config at all, it doesn't need it.
Note that if you stop in the rebase (e.g. because of a conflict), the
normal focus-in refresh of the lazygit main process will still try to
migrate the config at that time. This is the correct and expected
behavior, nothing to fix there; the file will show up as modified in the
Files panel, and needs to be discarded manually there before continuing.
Running integration tests from a tarball was never possible, but running
unit tests (`go test ./... -short`) was; this broke with v0.64.1
(specifically, with 34da956f5d). Make that possible again, and for all
tests now, including integration tests.
Running the tests in an exported source tarball fails with "must run in
lazy project folder or child folder". GetLazyRootDirectory searches the
working directory and its parents for a .git directory, and a tarball
doesn't have one. This has always affected the integration tests; since
34da956f5d a unit test calls the function too, so now even
`go test ./... -short` fails.
Search for the go.mod file that declares lazygit's module instead. It
ships in tarballs, and there is exactly one of it per source tree.
Put the function in our own pkg/utils rather than change lazycore's; the
criterion is specific to lazygit, and I don't feel like making a change
to lazycore.
Return an error rather than call log.Fatal, and report it from the two
callers that run under `go test`. In a test binary, log.Fatal exits
without attributing the failure to any test. That is the failure mode
34da956f5d set out to remove. The remaining callers are development
tools that have nothing useful to do without the root directory; they
keep exiting, now through MustFindLazygitRootDirectory.
Also stop the search at the root of the file system rather than at "/".
On Windows the old loop walks up to "C:\" and then spins there forever.
Bumps [github.com/sirupsen/logrus](https://github.com/sirupsen/logrus)
from 1.9.4 to 1.10.2.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/sirupsen/logrus/releases">github.com/sirupsen/logrus's
releases</a>.</em></p>
<blockquote>
<h2>v1.10.2</h2>
<h1>Logrus v1.10.2</h1>
<p>This is a small maintenance release that updates
<code>github.com/stretchr/testify</code> to v1.12.1, removing the legacy
<code>gopkg.in/yaml.v3</code> dependency from Logrus' dependency graph.
There are no functional changes in this release.</p>
<p>Dependency Changes</p>
<ul>
<li>update github.com/stretchr/testify to v1.12.1</li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/sirupsen/logrus/compare/v1.10.1...v1.10.2">https://github.com/sirupsen/logrus/compare/v1.10.1...v1.10.2</a></p>
<h2>v1.10.1</h2>
<h1>Logrus v1.10.1</h1>
<p>This patch release fixes two issues in field formatting and
handling:</p>
<ul>
<li>Fix a regression introduced in v1.10.0 where
<code>TextFormatter</code> could panic
when formatting nil or panicking <code>error</code> and
<code>fmt.Stringer</code> values.</li>
<li>Allow function-backed values implementing <code>error</code> to be
used with
<code>WithError</code>, <code>WithField</code>, and
<code>WithFields</code>.</li>
</ul>
<p>Dependency Changes</p>
<ul>
<li>update github.com/stretchr/testify to v1.12.0</li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/sirupsen/logrus/compare/v1.10.0...v1.10.1">https://github.com/sirupsen/logrus/compare/v1.10.0...v1.10.1</a></p>
<h2>v1.10.0</h2>
<h1>Logrus v1.10.0</h1>
<p>This release focuses on substantial performance improvements,
concurrency correctness, and better interoperability with modern Go
logging APIs.</p>
<h2>🚀 Performance</h2>
<p>Major improvements across <code>TextFormatter</code>, entry handling,
and common logger paths:</p>
<ul>
<li>~17% lower geomean runtime across the benchmark suite</li>
<li>~27% higher geomean formatter throughput</li>
<li>Common enabled logging paths are ~30–44% faster</li>
<li><code>WithError</code> is ~40% faster</li>
<li>Chained fields are ~46% faster</li>
<li><code>TextFormatter</code> paths are up to ~40% faster</li>
<li>Allocation counts are reduced by ~25–74% across measured
<code>TextFormatter</code> cases, with the largest reductions in colored
output</li>
</ul>
<p>The improvements also show up in complete logger paths:</p>
<ul>
<li>Logger + <code>TextFormatter</code> is ~31% faster, with ~24% fewer
allocations</li>
<li>Logger + <code>JSONFormatter</code> is ~21% faster, with ~10% fewer
allocations</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/sirupsen/logrus/blob/master/CHANGELOG.md">github.com/sirupsen/logrus's
changelog</a>.</em></p>
<blockquote>
<h2>1.10.2</h2>
<p>Changed:</p>
<ul>
<li>Update <code>github.com/stretchr/testify</code> to v1.12.1, removing
the legacy
<code>gopkg.in/yaml.v3</code> dependency.</li>
</ul>
<h2>1.10.1</h2>
<p>Fixes:</p>
<ul>
<li>Fix a regression introduced in v1.10.0 where
<code>TextFormatter</code> could panic
when formatting nil or panicking <code>error</code> and
<code>fmt.Stringer</code> values.</li>
<li>Allow function-backed implementations of <code>error</code> as field
values.</li>
</ul>
<h2>1.10.0</h2>
<p>Fixes:</p>
<ul>
<li>Fix reentrant logging deadlocks in formatter paths.</li>
<li>Fix race conditions in formatter and entry handling.</li>
<li>Fix generic <code>Log</code>, <code>Logf</code>, <code>Logln</code>,
and <code>LogFn</code> methods unexpectedly
panicking when called with <code>PanicLevel</code>. Use the
corresponding <code>Panic</code>
methods when panic behavior is desired.</li>
<li>Improve concurrency safety around formatter and hook access.</li>
</ul>
<p>Features:</p>
<ul>
<li>Add <code>slog</code> hook for forwarding Logrus entries to
<code>log/slog</code>.</li>
<li>Add <code>slog.Handler</code> for forwarding <code>log/slog</code>
records to a Logrus logger,
including levels, fields, groups, context, time, and optional caller
reporting. The hook and handler can also be combined to help migrate
between Logrus and <code>log/slog</code>.</li>
<li>Add minimal, composable logging interfaces for each log level. This
enables
consumers to depend on narrower interfaces, making it easier to
substitute
or adapt logging implementations.</li>
<li>Allow <code>Entry.Caller</code> to be set explicitly and preserve it
across derived
entries, enabling custom caller detection without Logrus overwriting
caller information when <code>ReportCaller</code> is enabled.</li>
</ul>
<p>Changed:</p>
<ul>
<li>Raise minimum supported Go version to 1.23.</li>
<li>TextFormatter now renders <code>[]byte</code> values as raw/quoted
strings instead of slice-of-ints.</li>
<li>TextFormatter now uses distinct dimmed colors for debug and trace
output.</li>
<li>TextFormatter now automatically enables colors on Windows terminals
with ANSI support,
matching the behavior on other platforms.</li>
<li><code>Entry.HasCaller</code> is now deprecated in favor of checking
<code>Entry.Caller</code> directly.</li>
<li>Deprecated <code>MutexWrap</code>, which was unintentionally exposed
as public API.
It remains available as an alias for compatibility but should not be
used</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/sirupsen/logrus/commit/6d6a132bc03324d4ceb78e1b927f995d014cda20"><code>6d6a132</code></a>
Merge pull request <a
href="https://redirect.github.com/sirupsen/logrus/issues/1586">#1586</a>
from thaJeztah/prepare_v1.10.2</li>
<li><a
href="https://github.com/sirupsen/logrus/commit/4f9465318cbf1bea0f31d01322cb2d75636ca8a6"><code>4f94653</code></a>
update changelog for v1.10.2</li>
<li><a
href="https://github.com/sirupsen/logrus/commit/87434bb3a736e2a27d34df66924471714f408d3d"><code>87434bb</code></a>
Merge pull request <a
href="https://redirect.github.com/sirupsen/logrus/issues/1585">#1585</a>
from thaJeztah/bump_testify</li>
<li><a
href="https://github.com/sirupsen/logrus/commit/e7d2120300a3e407bef3e8606bdd2ab0aa67dbf8"><code>e7d2120</code></a>
chore(deps): bump github.com/stretchr/testify v1.12.1</li>
<li><a
href="https://github.com/sirupsen/logrus/commit/8b673a9eb3a8c1b130907b9677f8d431c9ab1ae7"><code>8b673a9</code></a>
Merge pull request <a
href="https://redirect.github.com/sirupsen/logrus/issues/1583">#1583</a>
from thaJeztah/release_1.10.1</li>
<li><a
href="https://github.com/sirupsen/logrus/commit/0b920add8d9ba31342949f575067ea6024db81a6"><code>0b920ad</code></a>
Merge pull request <a
href="https://redirect.github.com/sirupsen/logrus/issues/1584">#1584</a>
from thaJeztah/more_coverage</li>
<li><a
href="https://github.com/sirupsen/logrus/commit/5e20694a7ac51fa08cb4e4c72259aac0e70d0a68"><code>5e20694</code></a>
TextFormatter: cover nil pointer method receivers</li>
<li><a
href="https://github.com/sirupsen/logrus/commit/83127326e4b798e5dab17e3593cc34f845592d49"><code>8312732</code></a>
update changelog for v1.10.1</li>
<li><a
href="https://github.com/sirupsen/logrus/commit/e987a4036b7f045048922c0c96903d99bf827f70"><code>e987a40</code></a>
Merge pull request <a
href="https://redirect.github.com/sirupsen/logrus/issues/1582">#1582</a>
from thaJeztah/panic_handler</li>
<li><a
href="https://github.com/sirupsen/logrus/commit/17d574b11e6e884800c2a8cfc6d3d134dcf4d452"><code>17d574b</code></a>
TextFormatter: recover panics from Error and String methods</li>
<li>Additional commits viewable in <a
href="https://github.com/sirupsen/logrus/compare/v1.9.4...v1.10.2">compare
view</a></li>
</ul>
</details>
<br />
When searching the focused main view using `/`, any updates to its
content were ignored because back when we introduced the focused main
view feature we couldn't make it work; search mode couldn't cope well
with the view content changing under it.
In this PR we make that work, and remove the limitation. Along the way
we fix a bunch of other related problems; some are only theoretical race
conditions that have been found by reading the code, but never observed
in reality; some are real problems that are too edge-casey to describe
in detail. See the individual commit messages for details.
A refresh left the focused main view alone while a search was on, so the
diff on screen stayed as it was however much the working tree had moved
on underneath it. The search could not cope with the content changing
under it, and leaving the content alone was the way around that.
It can cope now. The positions are worked out again from whatever the
view holds, and the status with them, so render it like any other.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Rendering a view's content again while a search is on leaves the "x of y"
describing the content that has just been replaced. The status is worked
out when the search is typed and again when a key steps through the
matches, and a render is neither. Change the diff context size while
searching the focused main view, and the count stays as it was, however
many matches the wider context brought in or took away.
Run the search again over the new content once the render has finished
putting it there.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Opening the search prompt reads the whole of the view's content, so that
the search counts every match in it. Rendering the content again reads
only as much as the scrollbar needs, so the matches below that point are
lost. The "x of y" drops to what the shortened content holds, and grows
again as the user scrolls far enough to load more.
Read to the end while a search is on, the way opening the prompt does.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A view's search positions were worked out again from every write, and
each of those walks the whole view. Content arrives a line at a time, so
rendering into a searched view costs a walk per line. Streaming 2000
lines takes 565ms, where the same render into an unsearched view takes
about 10ms.
Mark the positions stale on a write instead, and work them out where they
are read: when the view is drawn, when a key steps through the matches,
when the status is asked for. That is at most once a frame, and the same
2000 lines now take 8ms.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Search a view, step to the last match, then have the view re-rendered
with fewer matches in it, and the status reads "3 of 1". The positions
are worked out again whenever the content changes, but the index into
them stays where it was. Stepping on from there indexes the positions
out of range and panics.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
ReadToEnd reads the rest of a view's content on the render task's own
goroutine, and calls back once it has. Nothing held a task for that, so
lazygit counted as idle from the moment the caller returned until the
callback ran. The search prompt in the focused main view opens from such
a callback, so an integration test takes the idle report as its cue to
carry on, and presses its next key while the prompt is not open yet.
Hold the task in ReadToEnd rather than in the caller, so that every
caller is covered (see docs/dev/Busy.md).
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A caller of ReadLines or ReadToEnd is told that the content it asked for
has been read by the request's Then being called. A task that reaches the
end of its input answers the requests still queued behind the one it was
serving, but a task that is stopped drops them, and their callers wait
for a callback that never comes. Pressing "/" in the focused main view
opens the search prompt from such a callback, so if a re-render replaces
the task at that moment the prompt never opens.
Answering them as the read loop ends would leave a request handed over
after that point unanswered, and there is a window for one. A caller
reads the channel to send on, and can reach the send itself only once the
loop has gone. So hand requests over through a queue instead. Asking
whether a task is there and giving it the request are one step, as are
taking the task away and handing back what it never answered; a request
made in between goes back to the caller to answer.
The queue is unbounded rather than a fixed-size channel, for the reasons
gocui's userEventQueue is. Requests are handed over from the UI thread,
where a blocking send would deadlock against the task waiting to be let
go, and a fixed channel that fills up leaves only blocking, dropping,
reordering or panicking to choose between.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Ask a view buffer manager to read to the end of its content twice over,
then stop the task before it has served either request, as a re-render
replacing it does. Only the request it had already picked up is answered;
the one still queued behind it is dropped, and its caller waits for a
callback that never comes.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two places nudged the flags because nothing else would: switching repos,
where the view focused in the repo being left is not the one focused in the
repo being entered, and tabbing from the suggestions list back to the
prompt, which replaces the top of the stack rather than popping it, so the
suggestions context never hears that it lost the focus. Both are just a
context leaving the stack now.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A view drew a selection because something told it to, from four places on
three different schedules: a context being focused, a context losing focus,
a context being activated over another one, and a list being re-rendered.
Whether the flags ended up describing the state of the app depended on
which of those had run last, and the last one to run was often none of
them: a refresh only re-focuses the view that has the focus, so a list
whose contents changed underneath an unfocused panel kept whichever
highlight it happened to have.
Derive both flags instead, in one place, from the two things they mean: a
view shows a selection while its context is on the stack and has something
to select, and the context the user is in shows an active one where the
ones behind it show inactive ones. Nothing else needs to say anything about
highlighting, so nothing else can leave a view saying something untrue
about where the focus is.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Toggling whitespace needs the panel beneath to render its diff again, which
is what HandleRenderToMain is for; HandleFocus does that and also everything
else that belongs to a panel gaining the focus, which this panel already has
or, when the focus is in the main view, does not want. Re-selecting its
current item is harmless, but re-deriving its highlight as a focused panel's
is not: the selection turns bright while the user is somewhere else.
Changing the context size and switching diff renderers already ask for a
re-render this way.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Toggling whitespace re-focuses the side panel to re-render the diff, which
also re-derives that panel's highlight — as though the panel had the focus,
which it doesn't.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A refresh only re-derives the highlight of the view that has the focus, so
a list whose contents change while the user is somewhere else keeps the
selection it had: none for a list that just got its first item, and one
over nothing for a list that just lost its last.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Whether a view draws a selection is about to be derived in one place from
the context stack, which needs to ask any context — list or not — whether
there is something for a selection to sit on. Name the existing flag after
that question, and let a list context answer it from its length.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Nothing said that a context leaving the stack takes its selection with it,
which the work coming up is about to make the rule for every view. Two
places already depend on it and are held together by hand: switching repos,
where the view focused in the repo being left is not the one focused in the
repo being entered, and tabbing from the suggestions list back to the
prompt, which replaces the top of the stack rather than popping it.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The selected line of a view says nothing about whether a selection is drawn
over it, or which of the two ways it is drawn in, and those are what the
tests coming up are about.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
If a custom command's "context" field contains a context name that
doesn't exist, lazygit panics when building the keybindings. This could
happen either because of a typo, or because a context is removed or
renamed in a later version. Prevent the panic by validating those names
at config load time, and rejecting the config as invalid there, like we
do for other config errors.
If a custom command's "context" field contains a context name that
doesn't exist, lazygit panics when building the keybindings. This could
happen either because of a typo, or because a context is removed or
renamed in a later version. Prevent the panic by validating those names
at config load time, and rejecting the config as invalid there, like we
do for other config errors.
The gui package owns the list, but can't be imported from here, so it is
mirrored and a test over there ensures the copies stay in sync.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
All menus in lazygit can be filtered by pressing the `/` key; for most
menus which only show a handful of choices this is not really needed,
but with the two cases where it's useful, it was unnecessarily
inconvenient: you first have to press `/` to open the filter prompt, and
then press enter to confirm the filter before you could press enter
again to trigger the chosen item. It's much easier to simply type to
filter, and still use the arrow keys to select one of the filtered
items, or press enter to trigger it while the filter prompt is showing.
The consequence of this is that while the keybindings menu is open you
can no longer use the displayed key bindings to trigger the commands; I
think that's fine, that menu is more for looking up those keybindings
rather than for using them from within the menu.
Also: since `j`/`k` are bound to move the list selection by default, it
is not possible to filter for something that begins with `j`/`k`. I
didn't want to change this because I'm concerned that die-hard vim users
would perceive it as a regression if they can no longer type `j` to
select the next menu item. The workaround is to type some other letter
and backspace; this keeps the filter prompt open, so you can now type
`j` or `k`.
There is no `reservedKeys` any more; the list of keys that menu items must
not shadow is `essentialKeys` in the function that creates the menu.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Picking a repository out of that list is the other place where the menu is
a list to search rather than a set of commands, and its items have no keys
that typing could clash with.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The only menu that ever asked for it was the keybindings menu, which now
filters as you type and doesn't use the prompt at all. That leaves every
filterable context with the same prompt, so the whole hook can go, and
with it the two implementations that only existed to satisfy it.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Looking up a keybinding is a search, so the menu that lists them is the
one that most wants this. Its items do have keys, but only as a reminder
of what they do outside the menu, so nothing is lost by not binding them.
The prompt in front of the input field says what '@' does. It only ever
showed up while the user was typing in the search prompt, so it could
afford to be wordy; on a row that is on screen for as long as the menu
is, it can't.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Its footer, the hint in the menu's subtitle, where the row sits in
relation to the menu and the tooltip, and whether the text cursor is
showing are all things the tests for it need to look at.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The keys for paging through a menu are ',' and '.' by default, and there
is no non-printable alternative for them, so a menu that filters as you
type would lose paging altogether as soon as the user typed anything. The
same goes for confirming and cancelling if those keys are configured as
printable ones.
So bind the physical keys for all of it, on top of whatever is configured,
and only where they aren't the configured keys anyway.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The filter input is where the keyboard points for as long as such a menu
is open, so that the first printable key can go straight into it. The menu
still gets every key the input doesn't take, because the input view is
embedded in the menu view, and the two are drawn as one focused panel.
Which keys the input takes changes once there is a filter: until then
printable keys still drive the menu, so that the configured navigation
keys work as usual, and afterwards they are all filter text. A menu item's
own keys are never bound in such a menu, because typing one has to reach
the filter rather than execute the item.
Escape gives up the filter and leaves the menu open; the next one closes
it. The filter prompt behind '/' is gone from these menus: the row already
does that job, and a second filter would only be confusing.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The row is reserved for as long as such a menu is open, even while it is
still hidden, so that it can appear without moving the menu. That costs
two rows of the popup, which is why the screen has to be a little taller
before a menu is worth showing at all.
The prompt in front of the input field is dropped when the row gets too
narrow to type in, and the keybindings menu says what '@' does when it
still fits.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Nothing shows or positions them yet. The row is two views because the
input field has to start after the "Filter:" prompt, and a gocui view is
a rectangle: the frame view draws the row and the prompt, the field sits
inside it.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The footer is drawn on the bottom border of the list's view, which is not
always a free row: a panel that puts something else below the list shares
that border with it, and has to render the footer there instead.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A filter can come from somewhere other than the search prompt: a menu
that filters as you type has its own input field, and needs to apply what
is typed there without going through the prompt's state.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The check was a single set of view names, so it also let a click move
between two different panels, e.g. from the prompt to the commit message.
List the panels instead, and require both views to be in the same one.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A view can only be drawn with the focused frame and title colors while it
is the current view, but a panel made of an outer view and an editable
field embedded in it has to look focused as a whole, whichever of the two
the keyboard is pointed at.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Printable keys are withheld from keybindings while the user is typing in
a field, so that they end up as text. Decide that from the field that has
the focus rather than from the view a binding happens to be registered
for: a field can be embedded in another view, and that view's keys must
be withheld too, or its bindings would swallow the characters.
That makes it worth honouring KeybindOnEdit, which has been documented
but ignored ever since it was introduced. A field that sets it sees
printable keys offered to the keybindings first, and still gets them if
no binding handles them, which is what lets a view keep its keys until
the field has something to type into.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
When a key matches several bindings of the same view, the first one wins;
when it matches several of the view's parent, the last one did.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two places test for "a character the user typed" by hand, and a third
one is about to be needed. Give the test a name.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Originally I thought we'd benefit from this change in this branch; turns
out that we didn't after all, because we changed the approach, but it's
a nice cleanup anyway, so we include it here.
In larger repos, moving a rebase todo in an interactive rebase was
slower than necessary, especially when moving it up/down all the way
using auto-repeat.
Narrow rebase refreshes already have complete metadata for existing
todos. Reuse it so repeated todo moves do not spawn git show for the
entire list. New hashes still fall back to hydration.
This fixes two problems:
1. the list selection updated before the list content did, which caused
a bit of a wobble effect in the list
2. the main view would first update to a different commit's diff and
then back to the one that is being moved, resulting in a very ugly
flicker especially when moving the todo multiple times with auto repeat
Fix a bug introduced in #5928: dragging a commit with auto-scrolling so
that the original commit leaves the viewport, and then dragging back
into the view would snap the original commit back into view.
Labeled as ignore-for-release because it's a regression in a PR that
wasn't released yet.
When dragging a commit with auto-scrolling so that the original commit
leaves the viewport, dragging back into the view makes the original
commit snap back into view. This is a regression that was introduced by
aebf495dce.
Drag autoscrolling deliberately keeps rendering after the test action
has returned, so view bounds can change while the test goroutine
prepares its next mouse event. Snapshot the geometry on the event loop
before translating view-relative coordinates to avoid data races. This
hasn't been a problem so far, but only because we were lucky; the added
test assertions later in this branch would cause consistent race
detector failures without this fix.
In a commit that moves a bunch of files from one directory to another,
showing the commit's files and selecting the target directory of those
moves would show these files as newly added rather than moved in the
main view's diff. Selecting the source directory would show them as
removed. Fix this to keep showing them as moved in both cases. The same
applies to the files panel when staging the move of a file, and when
filtering the file list down to just the source or target directory
using the `/` filter in either panel.
The decision to show them as renames when selecting the "moved-from"
directory was not an easy one; it's slightly weird because the list of
files in the side panel doesn't show them there (they appear in the
target directory), but the main view does. An alternative would have
been not to show them in that case, to match the side panel. However,
the point of selecting a directory is to see all the changes that affect
it, and the moved-out files are relevant changes you want to see there.
See
https://github.com/jesseduffield/lazygit/discussions/4899#discussioncomment-17976172.
A commit that moves an entire package elsewhere renames hundreds of
files, and passing every one of their old paths can push the command past
the length limit the OS imposes (~32k characters on Windows). Their
common parent directory does just as well whenever everything it holds
ends up in the diff anyway.
Deciding that needs to consider every file of the diff, not only those on
display, so the paths are now derived from the model rather than from the
tree; a status filter must not make a directory look emptier than it is.
Git limits its tree diff by the pathspec before it looks for renames, so
a directory only ever gets one end of a rename whose other end is outside
it. Nothing is left to pair up, and the file turns into an addition or a
deletion that the commit doesn't contain.
Pass the other end along with the directory. This is bounded by the
number of renames that cross the directory's boundary, so it costs
nothing at all for the vast majority of commits.
The files and commit files panels each had their own copy of this, one of
which used to be missing the previous path of a rename. Growing them
apart again is the last thing we want, since the next commit needs to
teach both of them about renames that cross a directory boundary.
The files panel version only returned paths for the filtered case, and
left it to WorktreeFileDiffCmdObj to derive the rest from the node; now
that all callers pass the paths in, that command doesn't need to know
about renames at all.
Restricting the diff to the files that a filter leaves visible drops the
delete-side entry of a staged rename, so git shows the file as an
addition instead. Its commit files counterpart already passes both paths;
this brings the files panel in line.
Pathspec limiting happens before rename detection in git's tree diff, so
filtering the diff to a directory hides the delete-side entry of a rename
whose other end is outside that directory. Git then has nothing to pair
up, and reports a file moved into the directory as an addition and one
moved out of it as a deletion.
Selecting a directory is supposed to filter the commit's diff down, never
to change it, so both are wrong.
When several files have conflicts, resolving one of them makes it vanish
from the files panel as soon as it is auto-staged, and it only comes
back once the last conflict is resolved and the filter turns off again.
By then it sits among all the other changed files of the merge, so it is
hard to find the ones whose resulting diff you still wanted to check.
So remember which files had conflicts while the conflicted-files filter
is on, and keep showing them once they are resolved. This is the general
solution that #5936 called for; that PR only helped for the case of a
single conflicted file.
The consequence is that the selection no longer moves on to the next
conflicted file when one is resolved: it stays on the file you just
resolved, which shows you its diff right away.
When several files have conflicts, resolving one of them makes it vanish
from the files panel as soon as it is auto-staged, and it only comes back
once the last conflict is resolved and the filter turns off again. By
then it sits among all the other changed files of the merge, so it is
hard to find the ones whose resulting diff you still wanted to check.
So remember which files had conflicts while the conflicted-files filter
is on, and keep showing them once they are resolved. This is the general
solution that 39513d244d called for; that commit only helped for the
case of a single conflicted file.
The consequence is that the selection no longer moves on to the next
conflicted file when one is resolved: it stays on the file you just
resolved, which shows you its diff right away.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The next commit needs to know which files have conflicts, not just how
many of them there are.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Not only is this nicer code (and more idiomatic at least in this code
base), but it also avoids linter warnings about missing preallocations
(lo.Map does preallocate the result array).
This is a preparation PR for the upcoming fold-staging-into-main-view
work; see the individual commit messages for details.
The most notable change is probably that we switch to a double-buffering
approach for flicker-free view updates; previously we would overwrite
the view from the top, and keep the existing viewlines below untouched
to update without flicker. This caused numerous problems though that
will become more painful when we start using the main view for more
operations (especially staging); telling whether the selected line still
belongs to the previous task or already to the new one is tricky.
Rendering into an offscreen buffer and swapping it in as soon as we have
enough to fill the screen makes this much easier.
It existed for the incremental re-render: a shorter render left the previous
one's view lines in the tail (deliberately, to avoid a blank frame), and this
cleared them once the new content was fully read. Async renders now build
off-screen and swap in whole, so refreshViewLinesIfNeeded truncates the view
lines to the buffer and no tail can form. All the call at end-of-input still
did was discard every wrapped line and force the whole buffer to be re-wrapped
on the next draw, which is pure work on a large diff.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When a main view re-renders content different from what it last showed, the
scroll resets to the top. That reset fired synchronously when the task started —
but with the off-screen render the previous content stays displayed until the
swap, so resetting the origin up front scrolled that still-visible content to the
top before the new content replaced it: a distracting jump when switching commits
(or any item) while scrolled down.
Defer the reset to the first paint that reveals the new content, so the previous
content stays at its scroll until the new content takes its place, and then the
new content appears at the top. Swap and reset happen in one hop on the UI
thread, so no draw can land between them and show the new content at the old
scroll. A same-content re-render keeps its scroll. The "loading..." indicator
path also resets the origin now, since it clears the previous content to show the
message and must put it at the top.
The reset moves out of NewTask into the read loop, keying off the flag that
already records whether the render's content is new. NewTask still decides,
from the same command-key comparison as before and under the same lock. It has
to be that flag rather than per-task state, because a task can be stopped and
replaced before it ever paints — a background refresh landing just after the
user clicked a different item, which is the ordering a VS Code terminal
produces, since it delivers the focus-in event (and so the refresh) before the
click. The replacement renders the same content and so sets nothing of its own,
and the click's reset would be lost with the task that owed it.
The manager's onNewKey callback is renamed resetOrigin to match its now-decoupled
timing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When a task is stopped to make way for a newer one, stopping closes
opts.Stop, and the scanner goroutine then closes lineChan. The read loop's
select between those two channels is therefore non-deterministic: it can
land on the closed lineChan (ok == false) instead of the opts.Stop case,
sending a stopped task into the end-of-input branch.
There it runs the full finalize — swapping its half-read off-screen buffer
in, clamping the origin to the truncated content, and clearing the loading
flag — all of which corrupt what the incoming task is about to render. The
most visible symptom is a brief frame of truncated content with the scroll
yanked to the top, seen when re-renders overlap rapidly (e.g. the periodic
background refresh re-rendering a main view faster than it can load, very
easy to hit under LAZYGIT_SLOW_RENDER).
The underlying bug predates the off-screen render (the EOF branch always
clamped the origin via onEndOfInput), but that change made it far worse by
also swapping a truncated buffer into the display. Fix it at the source: in
the EOF branch, check whether we were stopped and, if so, bail out like the
explicit stop case, leaving the view entirely to the task that replaces us.
There's no test because the bug is the non-deterministic select itself:
any test would have to win a coin flip to observe it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A cmd/pty re-render used to overwrite the displayed buffer from the top
down as lines arrived, relying on keeping the previous render's view-line
tail to avoid a blank frame. That left the view showing a mixture of old
and new content while loading, and any reader (draw, clicks, the
view-line mapping) could observe a half-written buffer at the wrong
scroll.
Instead, build the new content in a second, off-screen viewBuffer: until
the task has read enough to paint, writes go there and the displayed
buffer — and so everything every reader sees — is left untouched. Once the
task reaches its first-paint point (InitialRefreshAfter, or EOF for short
content) it swaps the off-screen buffer in atomically, so the view jumps
straight from the previous render to the new one with no intermediate
frame. Subsequent lines append to the now-displayed buffer.
Swapping at the first-paint point means the displayed buffer is only a
viewport tall when it appears and then grows as the rest streams in toward
the count needed for an accurate scrollbar. The scrollbar is sized from the
displayed buffer's height, so left to itself the thumb would shrink and
snap back during that growth (most visibly: the files panel's periodic
refresh making the thumb jump while scrolled down). The total height the
scrollbar needs is a strictly later quantity than the viewport-fill paint,
so no single early swap can have both right. FreezeScrollbarHeight therefore
records the view's height when a load begins and the scrollbar is held there
— growing only if the new content turns out taller — until the load ends; a
synchronous render superseding the load releases it. This mirrors the layout
clamp, which already ignores the partial content height while a view loads.
With the swap doing a wholesale replace, refreshViewLinesIfNeeded can
truncate the view lines to the current buffer: there is no longer a
half-loaded shorter buffer whose tail we must keep showing, so a stale
tail never forms. clear()/Reset() abandon any in-progress off-screen
render so a synchronous SetContent after a stopped task writes to the
display.
The swap holds writeMutex for now; it could later move to the main thread.
Flicker behaviour still needs interactive verification (LAZYGIT_SLOW_RENDER
+ a real diff renderer).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A render that takes more than 200ms to produce its first line takes the view
over to say "loading...", which clears the buffer it was showing. That is
worth doing when the content coming is different — the view is showing
something the user has moved on from, and saying so beats leaving it there
silently. It is pure flicker when the content isn't changing: the view is
already showing exactly what the render is about to put back, and a slow
re-render of unchanged content is common (a background refresh over a repo
with submodules that have uncommitted changes, say).
So track whether the render in flight has content the view isn't already
showing, and only let the indicator take over when it does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
write, writeCells, makeWriteable, parseInput and
autoRenderHyperlinksInCurrentLine produced cells into v.buf; move them onto
viewBuffer so they can write into any buffer, not just the displayed one.
The display-side effects that don't belong to content production —
tainting, clearing hover, updating search positions — stay behind in the
View.write wrapper, which delegates the actual writing to v.buf.write(v).
Render config the writer needs (Editable, colors, width, tab width,
hyperlink auto-render) is read from the passed View. Behaviour-preserving:
the wrapper still always targets v.buf.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The fields that make up a view's content and the act of writing to it —
the cell buffer (lines), the write cursor (wx/wy), the escape-sequence
decoder (ei) and the held-newline flag (pendingNewline) — were loose
fields on View. Bundle them into a viewBuffer struct that View holds by
pointer. This is a behaviour-preserving prep refactor: every access just
goes through v.buf now. It sets up rendering into a second, off-screen
viewBuffer that can be swapped in atomically, so an async re-render never
exposes a half-written buffer to readers.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
refreshMainViews reset the scroll position of every other main view at the
very top, before moveMainContextPairToTop runs its CopyContent. CopyContent
copies the previously-shown view's content into the now-visible one to avoid a
blank frame during the async re-render — but because the reset ran first, it
had already zeroed the origin of that soon-to-be-copied source view. The
placeholder therefore always appeared scrolled to the top, jumping away from
wherever the screen actually was, on every cross-pair transition.
Move the reset to after the copy. The end state is unchanged (each other main
view still ends at origin 0, and the destination always re-renders), but the
brief placeholder now stays at the source view's real scroll position until
the real content paints.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The layout scrolls a view up if its origin is past the bottom of its
content, to avoid showing blank space (e.g. after a resize). But it measures
content height by the lines loaded so far, and command/pty tasks load
asynchronously. So when a view is re-rendered while scrolled down, the layout
would yank it to the top because only a fraction of the content has been read
yet, then leave it there once loading finished.
Track whether a command task is actively reading (set synchronously when the
task is created, so a layout pass in between sees it; cleared at EOF, but not
when stopped, since that means a newer task is taking over) and skip the
scroll-up clamp for such views. onEndOfInput already re-clamps once loading
completes.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A task's read loop processes one LinesToRead request at a time. The initial
request has a large line count and no Then callback; if the content is shorter
than that, the loop hits EOF on the initial request and breaks out, abandoning
any further requests still sitting in the readLines channel. So a ReadToEnd
call that races a still-loading-but-shorter-than-its-initial-read view has its
Then silently dropped: it isn't fired immediately (the channel was non-nil at
call time) and it's never dequeued.
On EOF, drain the queued requests and fire their Then callbacks before
breaking out, since reaching EOF trivially satisfies any "read more" request.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
hyperlinkAt (the click path) and onMouseMove/findHyperlinkAt (hover) read
v.viewLines without holding writeMutex, unlike every other reader. They run
on the event-handling goroutine, so a re-render on the task goroutine can
shrink or rebuild viewLines between the bounds check and the indexing,
causing an out-of-range panic (observed: "index out of range [60] with
length 0" while hovering during a diff re-render).
Take writeMutex for the duration, like the other viewLines readers do, so
the check and the access see the same slice.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Reading a view's internal buffer belongs on the view itself, next to
findHyperlinkAt, rather than in the event loop; and the view is where the
lock that guards that buffer can be taken.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Re-rendering a diff into a main view is asynchronous and lazy: the read
loop fills the view a screenful at a time and refreshes as it goes. When
debugging scroll-restore and flicker behaviour, the individual frames go by
too fast to see. Setting LAZYGIT_SLOW_RENDER=<milliseconds> sleeps that long
after each line is written, stretching the load out so the frames become
visible. It has no effect when unset, so it's safe to leave in.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Several methods assigned v.ox and v.oy directly: SetOrigin, CopyContent,
the wrap/autoscroll branches in draw, FocusPoint, and
Scroll{Up,Down,Left,Right}. Funnelling them all through SetOriginX and
SetOriginY gives a single place to observe (or set a breakpoint on)
every change to a view's scroll position, which makes debugging scroll
behaviour much easier.
This means those call sites now also get the setters' `< 0` clamps, but
that is behaviour-preserving in every case: each assigned value is
already >= 0. calculateNewOrigin never returns a negative number;
CopyContent copies origins that are themselves always >= 0; and the draw
and scroll writes are all guarded (or fed only non-negative amounts) so
the result can't go below zero.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
taskKey is written on the goroutine NewTask spawns, under taskIDMutex, but
GetTaskKey read it without the lock — and the string renders in
tasks_adapter.go call that from the UI thread while a previous task's
goroutine may be writing. A Go string is a two-word value, so a torn read
can pair one string's pointer with another's length and index out of
bounds, not merely return the wrong key.
Take the lock in GetTaskKey, and read the field directly at the one call
site that already holds it.
No test: the failure needs two goroutines to interleave inside a
two-word assignment, which nothing can schedule deterministically.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When a rebase (or multi-commit cherry-pick or revert) stops with a
conflict, it is often useful to look at the diff of the "<-- CONFLICT"
commit to double-check that the conflict resolution matches the diff of
the original commit. To make that easier, select that commit
automatically.
When a rebase (or multi-commit cherry-pick or revert) stops with a
conflict, it is often useful to look at the diff of the "<-- CONFLICT"
commit to double-check that the conflict resolution matches the diff of
the original commit. To make that easier, select that commit
automatically.
This doesn't change anything, we just pin down the selection behavior
around conflicts; we are going to change that behavior, and these tests
will make it obvious how when they change in the next commit.
When there is a single conflicting file left to be resolved, lazygit
dismisses the conflicted-files-only filter when the file no longer has
conflict markers. However, the selection moved to the top, which is
annoying because very often it is useful to look at that file's
resulting diff once more to confirm that conflicts were resolved
correctly, and finding it again can be cumbersome when there are many
changed files. So keep it selected.
Of course, this only helps for the last (or only) conflicted files; when
there are multiple, a resolved file disappears from the panel until all
are resolved, which makes it hard to double-check the resulting diffs.
Doing it afterwards is not easy because you'd have to remember which
files were conflicting. This needs a different solution, but for the
special case of only a single conflicting file this is already a big
improvement.
When there is a single conflicting file left to be resolved, lazygit
dismisses the conflicted-files-only filter when the file no longer has
conflict markers. However, the selection moved to the top, which is
annoying because very often it is useful to look at that file's
resulting diff once more to confirm that conflicts were resolved
correctly, and finding it again can be cumbersome when there are many
changed files. So keep it selected.
Of course, this only helps for the last (or only) conflicted files; when
there are multiple, a resolved file disappears from the panel until all
are resolved, which makes it hard to double-check the resulting diffs.
Doing it afterwards is not easy because you'd have to remember which
files were conflicting. This needs a different solution, but for the
special case of only a single conflicting file this is already a big
improvement.
When using lazygit in a multi-tab terminal it is useful to see if the
lazygit tab is currently active; ghostty does a very good job at dimming
down the inactive tabs, but VS Code's builtin terminal does not, so
indicate this on our side by removing the green highlight from panel
frames and tab titles, and showing the selection as inactive like we do
for a side panel when the main view is focused.
When using lazygit in a multi-tab terminal it is useful to see if the
lazygit tab is currently active; ghostty does a very good job at dimming
down the inactive tabs, but VS Code's builtin terminal does not, so
indicate this on our side by removing the green highlight from panel
frames and tab titles, and showing the selection as inactive like we do
for a side panel when the main view is focused.
This PR has two separate improvements for the startup time, in
particular for the time until the Files panel shows the modified files:
- avoid walking the `.git/workspaces` dir recursively, looking for the
gitdir files of linked worktrees. This code was not used to populate the
worktrees panel, but only for the decision in the Files panel whether to
show an entry with the worktree icon; it was doing unnecessary work,
because walking the `.git/workspaces` dir recursively is pointless (git
stores the worktree gitdir files only at the top level, so a flat read
of that directory would have been enough), and can take significant time
in large repos, especially when they have many submodules. Instead of
fixing that code, remove it entirely and rearrange the refresh code so
that we can use the regular worktree model for this Files panel
decision.
- at startup we were doing two full refreshes at the same time: the
regular one that we always do after loading a repo for the first time,
and then also a focus-in refresh. I didn't realize that a terminal will
send us a focus-in event right at the moment we request these events.
Nothing bad happens from doing those two refreshes at the same time, but
it slows things down a bit when we have two "git status" calls running
concurrently.
Both of these together reduce the time it takes for the Files panel to
show its files at startup (in my regular work repo with three worktrees
and ~30 submodules) from 860ms to 440ms, so almost a factor of two. If
you want to measure this in your own repo, here's a small throwaway
patch that you can use for that:
```diff
diff --git a/pkg/gui/controllers/helpers/refresh_helper.go b/pkg/gui/controllers/helpers/refresh_helper.go
index 40ce86eae..fbb482f39 100644
--- a/pkg/gui/controllers/helpers/refresh_helper.go
+++ b/pkg/gui/controllers/helpers/refresh_helper.go
@@ -26,6 +26,11 @@ import (
"github.com/sasha-s/go-deadlock"
)
+var (
+ applicationStartTime = time.Now()
+ applicationStartTimeOnce sync.Once
+)
+
type RefreshHelper struct {
c *HelperCommon
refsHelper *RefsHelper
@@ -1213,6 +1218,10 @@ func (self *RefreshHelper) refreshFilesAndSubmodules(captured capturedFilesState
self.refreshView(self.c.Contexts().Submodules, env)
self.refreshView(self.c.Contexts().Files, env)
+ applicationStartTimeOnce.Do(func() {
+ self.c.Log.Infof("Time until first files refresh: %s", time.Since(applicationStartTime))
+ })
+
return nil
}
```
To use it, run `./lazygit -l | grep "first files refresh"` in one
terminal, and `lazygit -d` in the one that you want to test. I'm curious
about your before/after measurements, feel free to post them below in
the comments.
A terminal that supports focus reporting answers with the state it is
already in when we turn reporting on, so at startup we were told that we
had gained focus that we never lost, and refreshed everything a second
time on top of the refresh that loading the repo had just started. The
two ran at once, each with its own `git status`, which made both of them
slower than the one refresh needed to be.
Keep track of what the reports say, then, and pass on only the ones that
change it. Assuming that we start out focused costs us nothing when we
don't: that same first report says so, so a lazygit started in a window
that isn't in front knows it from the start.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Finding out which of the files are worktrees of ours had its own answer
to where this repo's worktrees are, walking the directory that git keeps
them in. The worktrees panel asks git itself, and that is the better
answer: it is the one git gives for the same question elsewhere in the
app, and it doesn't need to know where git records what.
The model that panel fills is all the files need, so mark them from it.
That takes the work out of the file loader, whose other two callers were
paying for it without wanting it, and it costs no git call at all: both
models are written on the UI thread, so whichever of the two refreshes
lands second marks the files against the other's fresh data.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
We show this with a worktree icon (which is only shown when nerd fonts
are used, so turn these on), but also we strip the trailing `/` that
"git status" reports, so that it shows as a file rather than a directory
with a bogus file in it.
The reason for adding the test is that we are going to touch the logic
that determines whether an item in the Files panel is a linked worktree,
and this guards against regressing.
The worktrees were loaded and written by the branches refresh whenever
both were in scope, because the branches view shows worktrees against
branches: refreshing them separately rendered that view twice, once
with worktrees that were still stale.
Ordering the two is enough for that, and it leaves each scope owning
its own model again. The worktrees refresh now runs first and queues
its model write before it reports being done, so a branches refresh
that waits for it queues its own write behind that one, and renders
once with both. The worktrees scope only renders the branches view
itself when nobody else is going to.
As a side effect the two loads now run concurrently, where the branches
refresh used to load the worktrees after its own branches.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Everything in performRefresh is meant to read as "if this scope was
asked for, refresh it", with the scopes that always change together
expanded into each other up front so that each check can name a single
one. The commits and the branches were the exception: one condition
asking for either of them refreshed both, so what that block does only
followed from reading it together with the expansion at the top of the
function. The rebase commits hung off the same condition as an else,
even though it is the commits refresh they are an alternative to.
Expand those two into each other like the other pairs, and give each of
them a check of its own. They now capture their inputs separately,
which is what every other scope has always done.
The reflog stays with the branches rather than getting a check of its
own, because sorting the branches by recency needs it loaded first.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- log time stamps with nano-second granularity (on macOS we effectively
get only microseconds, but that's still more than we need); `lazygit -l`
prints them with millisecond resolution, which can be useful for
investigating performance
- add a blank line at startup to make it much easier to see where a new
run starts
It's overkill for most purposes, but I'd say it doesn't hurt to have the
extra resolution available in the raw JSON data for the few cases where
it's useful. Have "lazygit -l" print them with milli-second resolution;
that seems to be a good middle ground.
Pressing `a` in the files panel to stage all files would show a
confusing error popup about something with submodules, which made no
sense at all. And worse, when pressing `a` very quickly after startup
(before the initial refresh had a chance to populate the files panel) it
would crash with a nil pointer panic.
Fix both by showing an error toast that there are no files to stage.
Fixes#5929.
Besides the misleading error about submodules, the command crashes when
it runs before the first files refresh has come in: the file tree
doesn't exist yet at that point, and staging all of a tree that isn't
there dereferences a nil root node. That is easy to hit in a big repo,
where `git status` takes a moment while the panel sits there empty.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The stage-all command acts on the whole file tree, and nothing stops it
from doing that when the tree is empty. It ends up in the branch that
explains why a submodule couldn't be staged, which has nothing to do
with what the user did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
This is usually not a problem (except for the unnecessarily wasted time)
because all worktrees should normally be correctly formatted; but it is
a problem when we bump the formatter version, and some worktrees are
already on the new version and others still on the old.
This is usually not a problem (except for the unnecessarily wasted time)
because all worktrees should normally be correctly formatted; but it is
a problem when we bump the formatter version, and some worktrees are
already on the new version and others still on the old.
In v0.58 (see #5134) we changed the refresh behavior to no longer scroll
a selection into view by default if it had been scrolled out of view
using the mouse wheel; the primary reason for that was to avoid a
background fetch or files refresh to yank the selection back into view
while you are looking at something else, which was pretty annoying.
However, that meant we had to fix lots of cases where the selection
didn't become visible after a normal, foreground user action, and add
code to manually scroll it into view again in those cases. This is
error-prone and easy to forget for new features, and to this day we were
still missing some.
So turn it around: by default, the selection is scrolled into view
again, and the few cases where we don't want it (background routines and
the focus-in refresh) opt out.
This does mean that some user actions now scroll into view that didn't
before, and there might be cases where this is unwanted (I can't think
of one, but who knows). If we come across one we can easily fix it by
opting out; this is probably still much better than not scrolling into
view where it's wanted.
Every one of these did by hand what focusing the list now does on its
own: five hand-added scroll requests, and four origin resets that paired
a "select the first item" with a "and show the top of the list".
The scroll that the commits refresh performed when it found the selected
commit at a new index goes too. It is now unconditional for a foreground
refresh, and deliberately absent for a background one: when an agent
commits in another window, we would rather see the new commits arrive
than have the view yank itself back to the commit we had selected.
The one origin reset that stays is the one in ReApplyFilter, which runs
as part of a refresh and so can't rely on the refresh scrolling.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Ever since scrolling the selection into view became opt-in, we have been
fixing the same class of regression by hand, five times so far: a
controller moves the selection somewhere new, doesn't say that it wants
the view to follow, and the selection ends up off screen. The decision
needs facts from two places — whether the selection went somewhere new is
known to the list, whether the scroll position is the caller's to manage
is known to the caller — and asking every caller for both is what keeps
going wrong. The callers that get it wrong are usually not even the ones
that moved the selection: they are pass-throughs like postRefreshUpdate,
which can't know what a refresh did to the selection.
So default to scrolling, and let the two callers that maintain the scroll
position themselves say so.
The one case where scrolling is always wrong is a refresh that no user
action is behind: a background poll, or a reload of state on window
focus, after a subprocess, or after a repo switch. Those must leave the
viewport wherever the user last scrolled it to — that is what made the
scrolling opt-in in the first place. Both are already marked in
RefreshOptions, so the refresh can decide it once, centrally, instead of
each caller judging it.
A user action that ends in a foreground refresh does now yank the view
back to the selection if the user had scrolled away from it. That's a
behaviour change, and there may be actions where it turns out to be
unwelcome; those we can fix individually, and it beats the ones that
don't scroll today.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Since scrolling the selection into view became opt-in, five places have
had to be fixed by hand after the fact, none of them with a test. Cover
them now: making the scrolling automatic has to keep all five working,
and once it does, the hand-added scroll calls can go.
Two of them assert that the selection is visible rather than on an exact
scroll position, because the panel they look at changes height along the
way (filtering mode switches to half screen), or because what matters is
only that the commit we jumped to can be seen.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
This is the other place that manages its own scroll position: while a
drag extends the selection to a line below the viewport, the view stays
put, and the drag autoscroller scrolls it one line at a time for as long
as the pointer stays there. Making the scroll automatic would centre the
selection instead, i.e. jump the view rather than scroll it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The one behaviour that made scrolling the selection into view opt-in in
the first place — a background refresh must not yank the view back to a
selection the user scrolled away from — has never been covered by a test.
It's about to become the one case that the automatic scrolling has to
suppress, so cover it first.
Getting there needs two things from the test harness: mouse wheel events,
which are the only way to scroll a list panel without moving the
selection, and a way to trigger a background refresh. The periodic
routine that issues it is turned off in tests, and turning it on would
mean waiting for its timer and hoping it fires while we're looking, so
drive the refresh directly instead.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
We are about to make list panels scroll their selection into view
automatically. Page up and down are one of the few places that manage
the scroll position themselves, keeping the selection at the edge of the
viewport rather than in its middle, and nothing covers that today.
Asserting on it needs an exact scroll position assertion; only
OriginYAtLeast existed so far.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A lazygit instance that has been open for a while sometimes stops
showing pull requests, and keeps not showing them until you quit and
restart it. The cause is that we resolve the GitHub token once per
process and then keep using that stale answer.
We get the token from go-gh, which reads gh's `hosts.yml` on the first
call and caches it for the lifetime of the process. gh rewrites that
file whenever the active account changes, and keeps the active account's
token either in the file or in the system keyring, depending on the
account. Once the file changes under us, our snapshot no longer
describes reality: either we keep sending a token for an account that is
no longer active, or — if the snapshot was taken while a keyring-backed
account was active — we find no token at all, drop the remote, and show
no pull requests. Nothing is reported to the user, so it looks like PR
fetching is simply broken.
Switching accounts with `gh auth switch` is the easiest way to trigger
this, but it isn't limited to multi-account setups: a single account
hits the same thing whenever its token is rotated, or moved between the
keyring and `hosts.yml` by a fresh `gh auth login`.
So ask gh itself for the token on every refresh, with `gh auth token
--hostname <host>`, which resolves it afresh from whichever of the
environment, the keyring, or the config file currently holds it. Not
passing `--secure-storage` (which go-gh does internally) also means it
stops mattering which of the two the active account uses. go-gh's lookup
stays as a fallback for setups without the gh binary, where it still
picks up `GH_TOKEN` and friends; when gh is present it checks those
variables itself.
To reproduce on master, with two gh accounts, one with its token in the
keyring and one in `hosts.yml`: start lazygit while the keyring-backed
account is active, then run `gh auth switch` to the other one. The pull
request information disappears on the next refresh and doesn't come back
until lazygit is restarted. Running `gh auth token --secure-storage
--hostname github.com` by hand at that point prints `no oauth token
found for github.com`.
go-gh reads gh's config file once per process and answers from that
snapshot for the rest of the process's life. gh rewrites the file
whenever the active account changes, and stores the active account's
token either in it or in the system keyring, depending on the account.
A lazygit that has been running for a while therefore consults a
snapshot that no longer describes reality: it either keeps using a
token for an account that is no longer active, or, when the snapshot
was taken while a keyring-backed account was active, finds no token at
all and silently stops showing pull requests until it is restarted.
Asking gh resolves the token afresh on every refresh, from whichever of
the environment, the keyring or the config file currently holds it.
go-gh's lookup stays behind as a fallback for setups without the gh
binary, where it still picks up GH_TOKEN and friends.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When confirmOnQuit is true, quitting would sometimes hang for three
seconds and then print "cannot kill child process". Concretely, this
happened whenever the Files panel was focused but there were no changed
files (the main view shows "No changed files").
This is a regression in 0.64.0, it worked before.
Fixes#5918.
Quitting with confirmOnQuit set hung for three seconds and printed
"cannot kill child process", but only with a clean working tree. Closing
the confirmation pops the context before running its handler, so the
files panel is re-focused and re-renders the main view, and only then
does the handler return ErrQuit. With no changed files that render is a
string task, whose whole body is one hop to the UI thread — a hop that
is never served, because the handler's ErrQuit has meanwhile brought the
main loop down. The task can't finish, so the ViewBufferManager.Close
that follows waits for it until it times out. (With changed files it's a
command task instead, and every blocking point in one of those selects
on the stop channel, so Close gets through.)
A wait for the UI thread now ends when the loop does. That also covers
the command task's own hops, which are stopped only in between them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Nothing dequeues user events once MainLoop has returned, so a worker
blocked in OnUIThreadAndWait is blocked for good. The assertion records
that; the next commit makes the wait give up instead.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Right now the function always returns nil, but this will change later in
this branch, so handle errors properly. Without that, the first capture
that assigns env.git would not run, leave env.git nil, and subsequent
code would crash.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every caller passes an f that unconditionally returns nil, so f's error
return has never carried anything: the value is dead weight, and it
occupies the one channel the wait itself needs to report that it couldn't
run f at all. Drop it, so that the error the wait returns can only ever
mean that.
Work that can fail hands its error back through a captured variable, the
way the background fetch already hands back four values, which keeps the
two outcomes distinguishable at a call site that has both.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
If the `conflict-marker-size` git attribute is used to set the marker
size to a non-default value (!= 7), lazygit's handling of conflicted
files was totally broken. Stopping at a commit with conflicts in a
rebase would show the `UU` files for a moment, and then, a few seconds
later, would stage all conflicted files and offer to continue the rebase
(with the conflicts baked into the resulting commits if you confirmed).
Even if you cancelled the continue prompt, it wasn't possible to use
git's conflict panel to resolve the conflicts; it would only show the
regular diff for those files, not its conflicts editor.
Fix this by querying the `conflict-marker-size` git attribute for all
conflicting files and use that to match the conflict markers.
Fixes#4367.
Git only writes the space after a marker when there is a label to write
after it, and the label can be empty: `git checkout -m` with the diff3
conflict style, for instance, has no name for the common ancestor, so it
writes a bare "|||||||" line.
Ask git for the attribute of every conflicted file whenever we load the
file status, so that we recognize the markers it actually wrote. Files
that are set up this way are precisely the ones whose regular content
tends to contain marker-looking lines, so matching a run of at least
seven characters instead is not an option: we'd take the file's own
content for markers and then never consider its conflicts resolved.
One `git check-attr` call covers all conflicted files at once; asking per
file would take seconds when hundreds of files are conflicted, and it
would hurt worst on Windows, where spawning a process is expensive.
Because the lookup rides along with the file status, it costs nothing
when there are no conflicts, and editing .gitattributes during a merge
takes effect on the next refresh.
When a file's conflict markers aren't seven characters long we don't
recognize them at all. Two things go wrong: we consider the file's
conflicts resolved, so we stage it and offer to continue the merge a
moment after stopping at it; and pressing enter on it shows its diff
instead of the merge conflicts view, leaving no way to resolve it in
lazygit.
Git doesn't always write conflict markers of seven characters: the
conflict-marker-size gitattribute overrides that per file, and it is set
for good reasons — for file types whose regular content tends to contain
marker-looking lines, such as documentation about merging, or test
scripts. We hard-code seven characters everywhere we look for markers,
so none of that works.
Prepare for honoring the attribute by threading the marker size through
everything that recognizes a marker, carried on the file model. Nothing
fills it in yet, so we still use git's default size of seven everywhere,
and matching is unchanged: a marker consists of exactly that many marker
characters, and all but the "=======" one are followed by a space and a
label.
This fixes a regression in 0.64.0: before that version, creating or
popping a stash would happen synchronously on the UI thread (including
the refresh), blocking the UI until everything changed, including the
panel focus. Blocking the UI was not nice of course, but at least the UI
update was clean. With 0.64.0 this changed to a background refresh, so
that the update to the two panels and the focus change all happened out
of sync, which looks rather ugly. Fix this by using Refresh's mechanism
to batch UI updates, and switch the panel focus in the Refresh's Then so
that it updates at the same time.
While we're at it, use a waiting status spinner for these operations;
they are usually fast when only few files are involved, but when
stashing a large number of files in a larger repo it can be noticeable,
and it looks ugly if the confirmation prompt stays on the screen while
it is running.
Creating and applying a stash both touch every changed file, so in a
large repo they can take long enough to be noticeable — and running them
on the UI thread meant the confirmation popup stayed on screen, frozen,
for the whole operation. Run them on a worker instead, with a spinner,
and keep blocking input for their duration so that the type-ahead
guarantee the refresh used to provide still holds.
Dropping stays on the UI thread: it only rewrites the stash reflog, so
it's fast no matter how big the stashes are.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Collapsing the range before kicking off the refresh paints the new
selection against the list as it was before the drop, so for a frame the
entries that were just dropped are still on screen (and, with
gui.shrinkSidePanelsToContent, the panel is still at its old size).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Pushing the files context right after kicking off the refresh moves the
focus (and, with gui.shrinkSidePanelsToContent, resizes the panels) a
frame before the refreshed stash and files lists arrive. Doing it from
Then puts it in the same frame as the data it belongs to.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Stashing and popping change both the stash list and the files list.
With each scope updating the UI as soon as its own refresh is done, the
two panels visibly change at different times; with
gui.shrinkSidePanelsToContent that also means their sizes change at
different times than their contents.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Lazygit assumes a repo can be found again from its working directory: it
chdirs there and lets git rediscover the git dir from `<worktree>/.git`.
That holds for an ordinary repo and breaks for every setup where the git
dir lives somewhere else, which is where these bugs come from. Opening
such a repo worked at all only when `--git-dir` happened to leave
`GIT_DIR` in the environment for every command to inherit — which is
also why entering a submodule, which has to clear it, broke the way back
out.
Three reported problems:
- **`core.worktree` (#5895).** A repo whose work tree is elsewhere
panicked on startup with `fatal: not a git repository`: we chdir'd into
a work tree with no `.git` in it and every command after that was lost.
We now work out at startup whether git can find the repo from its work
tree, and when it can't we put `GIT_DIR`/`GIT_WORK_TREE` on every
command the repo's command builder produces — as well as in the process
environment, for subprocesses that don't come through the builder.
Nothing is set for the repos git can find on its own, which is nearly
all of them.
- **Escaping a submodule of a dotfile repo (#1118).** The repo-path
stack we push the superproject onto only held its path, and for a repo
opened with `--git-dir`/`--work-tree` the path leads nowhere. Escaping
failed with `not a git repository`, or, if some unrelated repo happened
to lie above the work tree, quietly switched to that one instead. The
stack now carries the environment as well, taken from the repo paths
rather than from the process env, so it also covers a repo whose
location lazygit worked out itself.
- **Opening a directory that holds a bare repo (#5469, #5681).** `git
rev-parse --show-toplevel` is fatal when there's no work tree, so we
never got an answer at all for a bare repo: `IsBareRepo()` could never
come out true, and lazygit either died with a stack trace or decided we
weren't in a repository. We now ask again without `--show-toplevel` when
the first query fails, and the existing "open most recent repo?" prompt
does its job.
Some related things that turned up on the way:
- **A submodule no longer looks like a linked worktree.** `git worktree
list` reports the main worktree as the common git dir with a trailing
`/.git` removed, which is not the working tree when the git dir doesn't
live inside it. Comparing that against the working tree path matched
nothing, so inside a submodule the status bar claimed we were in a
linked worktree named after the submodule, the worktrees panel listed it
as not current, and its branch got a "checked out elsewhere" marker.
Worktrees are now identified by their git dir, which names them
unambiguously.
- **Commands aimed at another repo no longer resolve against ours.**
With `GIT_DIR` set, `git -C mysub log -1` reports the *superproject's*
commit, silently. So opening lazygit with `--git-dir`/`--work-tree`
quietly broke resolving submodule conflicts, stashing and resetting a
submodule, and detaching another worktree.
- **Starting lazygit in a repo's `.git` dir opens the repo.** It used to
tell you that you were in a bare repo, which you weren't — the work tree
was one directory up. git's own convention is that a git dir called
`.git` belongs to the directory holding it, so we look there. (A linked
worktree's or a submodule's git dir isn't called `.git`, and nothing we
look at says where their work tree is, so those still get the prompt.)
- **`RepoPath()`** is documented to be the work tree when we're in the
main worktree, but was derived from the git dir's location, which is
only the same thing when the git dir is inside the work tree. This fixes
the repo name shown in the status panel for split setups.
Fixes#1118Fixes#5469Fixes#5681Fixes#5736Fixes#5895
Running lazygit in a .git dir got you told you were in a bare repo,
which you weren't: the worktree was sitting right there, one directory
up. git's own convention is that a git dir called .git belongs to the
directory holding it — that's how `git worktree list` names the main
worktree — so ask that directory, and if it is a worktree, open the repo
we were really being asked about.
The git dirs that aren't called .git keep the answer they had. A linked
worktree's and a submodule's do have a worktree, but nothing we look at
says where, so we would be guessing; a bare repo's has none to find.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Entering a submodule clears GIT_DIR and GIT_WORK_TREE, as it must: they
say where the superproject is. But the stack we push the superproject
onto so that escape brings us back only held its path, and for a repo
opened with --git-dir/--work-tree the path leads nowhere — git can't
find a repo there. Escaping out of a submodule of a dotfile repo failed
with "not a git repository", or, if some unrelated repo happened to lie
above the work tree, quietly switched to that one instead.
Push the environment onto the stack along with the path, taken from the
repo paths rather than from the process env, so that it also covers a
repo we worked the location out for ourselves.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
git finds a repo by looking for a .git in the directory a command runs
in. Lazygit runs its commands in the work tree, so that normally works —
but not when the git dir lives somewhere else entirely, which is what
core.worktree and --work-tree are for. Lazygit chdir'd into such a work
tree and then ran commands that couldn't see any repo from there, so
opening a repo with core.worktree set panicked on startup. It only
worked with --git-dir because that leaves GIT_DIR in the environment for
every command to inherit.
Work out at startup whether git can find the repo from its work tree,
and when it can't, put GIT_DIR and GIT_WORK_TREE on every command the
repo's builder produces. As with the working directory the builder pins
(527124d0e0), these also go into the process env — subprocesses don't
come through the builder — but the commands don't read them from there,
because the process env belongs to whichever repo we have switched to
since.
Working out whether git can find the repo means asking git, rather than
reading the .git file, whose contents can spell the same directory
differently than git does. The extra query is skipped for a repo whose
git dir is simply its .git directory, which is nearly all of them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
GIT_DIR and GIT_WORK_TREE tell git where our repo is, and every command
we run inherits them — including the ones we point at a submodule or
another worktree. git resolves those against our repo instead, and says
nothing about it: with GIT_DIR set, `git -C mysub log -1` reports the
superproject's commit. So opening lazygit with --git-dir/--work-tree
quietly broke resolving submodule conflicts, stashing and resetting a
submodule, and detaching another worktree; the worktree list came back
claiming every worktree shared our git dir.
Drop the two variables from the commands that address another repo.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Reset told git to change directory with -C while runInParentModule does
it by setting the command's working directory, but they were computing
the same directory for the same reason. Use the helper, so that there is
one place that knows what running in a nested submodule's parent means.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Its working directory resolves against the process rather than against
the repo the command builder pins commands to, which is only safe
because nothing but foreground commands come through here.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
git makes `rev-parse --show-toplevel` fatal when there's no work tree,
so asking for it together with everything else meant we never got an
answer at all for a bare repo: GetRepoPaths returned an error, nobody
ever saw IsBareRepo() == true, and lazygit either died with a stack
trace or decided we weren't in a repository. That's what you got for
opening it in a directory holding a bare repo and a .git file pointing
at it, which is a normal way to keep a repo and its worktrees together.
Ask again without --show-toplevel when the first query fails: the other
queries work fine without a work tree, so if they now succeed we know
we're in a bare repo, and the existing prompt offering to open a recent
repo does its job. If they fail too we're not in a repo at all, and the
first error already says so.
--is-bare-repository is gone from the query: a work tree implies
core.bare is false, so it could only ever come back false there, and
what matters to us is whether there is a work tree to show, which is
what we now go by.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
"does not yet support" reads as a promise that it will, but it's quite
likely that it never will.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
onNewRepo also runs when switching repos, and a failure there leaves us
in the repo we came from — with a nil GitCommand, which nothing else is
prepared for. Only assign once we have one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
RepoPath() is meant to be the same as WorktreePath() when we're in the
main worktree, but we derived it from the git dir's location instead.
That is only the same thing when the git dir lives inside the work tree.
With core.worktree, --work-tree, or a .git file pointing at a repo dir
that isn't called .git, it lands on a directory that isn't a worktree at
all, and the repo name we show follows it there.
A worktree that has the repo's common git dir to itself is the main
worktree, so use its path. That subsumes the submodule case, whose git
dir lives under the superproject's .git/modules but is still the
submodule's own common dir; --show-superproject-working-tree is now only
needed for a linked worktree of a submodule.
The existing bare repo test asserted a git output that can't occur (a
work tree and --is-bare-repository=true at once), but the rest of it is
the shape of a repo opened with --git-dir/--work-tree, where the new
repo path is the correct one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When the work tree lives somewhere else entirely — set up with
core.worktree or --work-tree — we're still in the main worktree, so
RepoPath() should be the work tree, as its own doc comment says. Instead
we derive it from the git dir's location, which lands somewhere that
isn't a worktree at all, and the repo name follows it.
The ACTUAL lines are indented as they will be once the EXPECTED ones
replace them, rather than as gofumpt wants them while the comment
markers are still splitting the struct's alignment. That leaves this one
file not gofumpt-clean until the next commit, in exchange for a diff
there that shows only the lines that actually change.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`git worktree list` reports the main worktree as the common git dir with
a trailing "/.git" removed, which equals the working tree only when the
git dir sits inside it. In a submodule, a bare repo, or a repo using
core.worktree it doesn't, so comparing the reported path against the
working tree path matches nothing: no worktree is recognized as current
or as main. Most visibly, inside a submodule lazygit claimed we were in
a linked worktree named after the submodule, and offered to remove that
"worktree".
Comparing git dirs identifies a worktree unambiguously, so use that.
A worktree whose directory is gone has no git dir to compare, and there
we still have nothing better than its path.
The submodule tests were asserting the linked-worktree suffix in the
status view; it is gone now, and the repo name still says which
submodule we're in.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A submodule's git dir doesn't live inside its working tree, and `git
worktree list` reports it by its git dir. Lazygit compares that against
the working tree path, so it recognizes neither the current nor the main
worktree, and the UI ends up claiming we're in a linked worktree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The scenarios describe their repo by its paths but leave the git dirs
empty, which no repo has. Unused for now; the loader is about to want
them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Our minimum required git version is 2.32.0, which is the first version
that does support the GIT_CONFIG_GLOBAL env var, so we don't need the
~/.gitconfig dance any more.
Our minimum required git version is 2.32.0, which is the first version
that does support the GIT_CONFIG_GLOBAL env var, so we don't need the
~/.gitconfig dance any more.
### PR Description
Refresh the Nix flake inputs - see #5882.
Direct input revisions:
- `flake-parts`: `758cf7296b` → `427bf4bd94`
- `nixpkgs`: `c9b6fb7985` → `e72e4f2994`
- `treefmt-nix`: `5eda4ee812` → `d1187f8bc7`
- `systems`: unchanged at `da67096a3b`
- `flake-compat`: unchanged at `ff81ac966b`; its immutable URL metadata
was normalized by the lock refresh
The refresh also updates the transitive `nixpkgs-lib` and
`treefmt-nix/nixpkgs` inputs.
The newer nixpkgs revision deprecates `pkgs.nixfmt-rfc-style` because it
now aliases `pkgs.nixfmt`. Uses the current attribute directly,
preserving
formatter behavior and removing the two evaluation warnings.
### Testing
- `nix flake check`
- `nix develop --ignore-environment -c just format` with a writable
`GOCACHE`
- `nix develop --ignore-environment -c just build` with a writable
`GOCACHE`
- `nix develop --ignore-environment --keep HOME -c just unit-test` with
a writable `GOCACHE`
- `nix develop --ignore-environment --keep HOME -c just lint` with
managed proxy variables and task-local caches
- `nix-shell --run 'just --version'`
- `git diff --check`
### Please check if the PR fulfills these requirements
- [x] Cheatsheets are up-to-date — no integration-test or keybinding
changes
- [x] Code has been formatted
- [x] Tests have been added/updated — no test changes needed; unit suite
passes
- [x] Text is internationalised — no user-facing strings changed
- [x] UserConfig hot reload is unaffected — no UserConfig changes
- [x] Docs have been updated if necessary — no documentation changes
needed
- [x] You've read through your own file changes for silly mistakes etc
<!--
Be sure to name your PR with an imperative e.g. 'Add worktrees view',
and make sure the title
is suitable to be included as a bullet point in release notes (i.e.
phrased from a user's point
of view).
see https://github.com/jesseduffield/lazygit/releases/tag/v0.40.0 for
examples
-->
flake.lock pins the exact revision of everything the Nix build pulls in
(the package set it takes git, Go and the formatters from, plus a few
helper libraries), much like go.sum does for Go modules. Nothing
refreshes it automatically and no CI job exercises it, so the pins had
quietly drifted the better part of a year behind.
The flake-compat entry also grows a "?rev=...&revCount=..." suffix on
its download URL. That is not a version change: the server hosting the
archive advertises those two values as part of the canonical URL now,
and they only restate the rev and revCount that the same entry already
lists as separate fields. The archive fetched is byte-for-byte identical
either way.
The nixpkgs package set renamed the Nix code formatter: what used to be
called nixfmt-rfc-style is now simply nixfmt, and the old name lives on
only as an alias. Both names resolve to the identical program, so this
doesn't change how anything gets formatted.
The rename comes first because the dependency update in the next commit
makes that alias start printing a deprecation warning, so doing it in
this order means no commit in the history evaluates with one.
PipeCommands ran every command in its own goroutine, each doing
Start/read-stderr/Wait, with nothing ordering one goroutine's Start
against another's Wait. That ordering matters: StdoutPipe registers the
parent's read end in cmd.parentIOPipes, and Cmd.Wait closes those
descriptors when it returns. The next command's Stdin is that very
*os.File, and exec passes a user-supplied *os.File through untouched, so
Start hands the child whatever the fd happens to be at that moment. If
the producer finished and got reaped before the consumer's goroutine
reached Start, that fd was already closed, File.Fd() returned -1, and
the child was started with fd 0 closed -- reading nothing at all.
The only caller is the pre-2.35 fallback in SaveStagedChanges, which
pipes `git stash show -p` into `git apply -R`. Losing that race left git
apply with an empty patch, so it failed with "unrecognized input", the
following `git stash drop` never ran, and the user was left with a stray
stash entry. This turned up as a flaky stash/stash_staged on the git
2.32.0 CI job; the newer-git jobs take the `git stash push --staged`
path and never reach this code.
Starting every command up front removes the race, and collecting stderr
into buffers lets exec's own copying goroutines do the work. That also
fixes two lesser problems in the same function: finalErrors was appended
to from several goroutines without synchronization, and a failed Start
was only logged, so a pipeline that never ran reported success.
PipeCommands ran every command in its own goroutine, each doing
Start/read-stderr/Wait, with nothing ordering one goroutine's Start
against another's Wait. That ordering matters: StdoutPipe registers the
parent's read end in cmd.parentIOPipes, and Cmd.Wait closes those
descriptors when it returns. The next command's Stdin is that very
*os.File, and exec passes a user-supplied *os.File through untouched, so
Start hands the child whatever the fd happens to be at that moment. If
the producer finished and got reaped before the consumer's goroutine
reached Start, that fd was already closed, File.Fd() returned -1, and
the child was started with fd 0 closed -- reading nothing at all.
The only caller is the pre-2.35 fallback in SaveStagedChanges, which
pipes `git stash show -p` into `git apply -R`. Losing that race left
git apply with an empty patch, so it failed with "unrecognized input",
the following `git stash drop` never ran, and the user was left with a
stray stash entry. This turned up as a flaky stash/stash_staged on the
git 2.32.0 CI job; the newer-git jobs take the `git stash push --staged`
path and never reach this code.
Starting every command up front removes the race, and collecting stderr
into buffers lets exec's own copying goroutines do the work. That also
fixes two lesser problems in the same function: finalErrors was appended
to from several goroutines without synchronization, and a failed Start
was only logged, so a pipeline that never ran reported success.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Entering or leaving filtering mode switched the screen mode and the
focused panel immediately, then reloaded the commit list in the
background. The result was an unfiltered list presented in the layout
that says "you are filtering", with nothing to say that anything was
still happening — and in a big repo that state can last seconds.
This is a regression in 0.64.0 (more specifically, from #5790): before
that we stopped blocking the UI thread on refreshes, the reload happened
before any of it, so the two always agreed; the price was a frozen UI
for the duration.
Do neither: reload on a worker, so the UI stays live, and hold back
everything the user can see of the change until the new lists are ready,
so they still land together in one frame. A waiting status says what is
going on in the meantime, and blocking input means the keys pressed
while it runs arrive after the change rather than acting on a list that
is about to be replaced.
The commit list a filtering mode change leaves behind has nothing to do
with the one that was showing, so the scroll position it inherits says
nothing about where the selection ended up, and the selection can land
anywhere off screen. PostRefreshUpdate only moves the cursor within the
existing scroll position, so ask for the scroll separately, the way the
commits refresh does when it moves the selection itself.
Exiting filtering mode looked like it worked, but only by accident: the
commits refresh recognizes the commit that was selected before it ran,
selects it again at its new index, and scrolls because the index moved.
That does nothing for the case where the commit is gone from the list, or
for entering filtering mode, where we select the first commit ourselves.
Entering or leaving filtering mode switched the screen mode and the
focused panel immediately, then reloaded the commit list in the
background. The result was an unfiltered list presented in the layout
that says "you are filtering", with nothing to say that anything was
still happening — and in a big repo that state can last seconds.
Before we stopped blocking the UI thread on refreshes, the reload
happened before any of it, so the two always agreed; the price was a
frozen UI for the duration.
Do neither: reload on a worker, so the UI stays live, and hold back
everything the user can see of the change until the new lists are ready,
so they still land together in one frame. A waiting status says what is
going on in the meantime, and blocking input means the keys pressed while
it runs arrive after the change rather than acting on a list that is
about to be replaced.
Setting a filter and clearing it are the same transition in opposite
directions: mutate the mode, bring the screen mode in line with it,
reload the views that depend on the filter, and put the selection
somewhere sensible in the reloaded commit list. They were implemented
twice, once in the filtering menu and once in ModeHelper, which is how
the two came to repaint the commit list in different ways.
Derive the screen mode and the panel switch from whether a filter is
active after the change, so both directions fall out of the same code,
and give ModeHelper the entry points for both. The filtering menu is
left with nothing but the menu.
Blocking keyboard input and hiding the working tree state mode are two
separate concerns; they were fused into one helper because every caller
so far wanted both. A caller that blocks input for something other than a
rebase would then hide the "Rebasing" indicator for the duration of its
operation, which has nothing to do with it.
Make it an explicit option instead, so blocking input on its own doesn't
imply anything about the modes on display.
The mode it suppresses is active for any working tree state, not just a
rebase: merging, cherry-picking and reverting show through the same
indicator. Name it after what it hides.
Whether a graph can be drawn was read from the filtering mode, while the
graph itself is drawn over the commit list in the model. Those two only
agree once the list has been reloaded for the new mode, and a filtering
mode change reloads the list in the background, so in between we can be
asked to draw a graph over a list the graph makes no sense for.
That is not just cosmetic. Commits in a filtered list are almost never
each other's parents, so no pipe ever terminates: the pipe set grows by
one per row and every continuing pipe rescans it, which is cubic in the
length of the list. Escaping out of filtering mode with a filtered list
of 13000 commits — as you get once the 300 commit limit has been lifted,
which happens for good as soon as the selection passes COMMIT_THRESHOLD
— wedges the UI thread for around twenty minutes.
Record whether the list was loaded with a filter, right where the list
itself is stored, and decide from that. The graph now also stays up while
the pre-change list is still on display, rather than vanishing a moment
before the list it belongs to.
This fixes spurious test failures caused by git's auto maintenance
running concurrently with a test's fixture setup; see the first commit's
message for details.
In addition, we change the test harness so that such a failure in a
setup method doesn't take down the whole test binary.
A failing setup step called Shell.fail, which panicked. Tests run as
parallel subtests, so that panic aborted the entire test binary: one bad
fixture cost us the results of all ~500 tests, and the failure was
reported as a stack trace rather than against the test that caused it.
Keep panicking to skip the remaining setup steps -- they would only
produce follow-on failures -- but recover in createFixture and return the
message as that test's error. All three clients already propagate an
error from a test, so they report it the way they report any other
failure.
Every `git commit` forks `git maintenance run --auto --quiet --detach`,
and git 2.54 changed what that runs from the `gc` task to the
"geometric" strategy. The geometric repack's auto condition passes its
threshold of 100 to too_many_loose_objects(), which estimates the loose
object count from the objects/17 fanout directory times 256, so the real
trigger is two objects in that one directory -- where the old gc task
needed 27. Fixture repos reach two easily: every CreateNCommits(n>=6)
repo already stores the blob for file06.txt there, so a single commit
object hashing into 17 (about 4% of fixtures with 10 commits, 15% with
40) tips it over, and from then on every commit in that repo forks a
detached `git repack -d`, which prunes loose objects while the next
fixture command -- or lazygit under test -- is still working in the same
repo.
That is where the CI panics during fixture setup come from:
panic: error running command: [git commit -m commit-10]
error: invalid object 100644 50d5612... for 'file09.txt'
error: Error building trees
The reported hashes are exactly the fixture blobs, so `git add` staged
them correctly; they were unlinked underneath the commit. Only the
"git latest" jobs saw this, since the pinned 2.32/2.38/2.44 jobs predate
the strategy change.
git's own test suite guards against the same thing by exporting
GIT_TEST_MAINT_AUTO_DETACH=false ("Ensure that tests cannot race with
background maintenance by default"). Turning maintenance off outright is
stronger: no test repo needs it, and it also spares us a forked git
process per commit. maintenance.auto has been honored since git 2.29, so
it covers every version in the CI matrix.
Measured on a 40-commit fixture: a background repack fired in 4 of 25
runs before, 0 of 25 after.
### Description
Add `just` to the default Nix development shell so contributors can use
the repository's `justfile` without installing `just` separately. Keep
GNU Make available as the existing fallback.
no `flake.lock` update required. `just` comes from the already-pinned
`nixpkgs` input, and no flake input changes.
Closes#5881.
### Testing
- `nix-instantiate --parse flake.nix`
- `nix flake check`
- `nix develop --ignore-environment -c just --version`
- `nix develop --ignore-environment -c go version`
- `nix develop --ignore-environment -c just format`
- `nix develop --ignore-environment -c just build`
- `nix develop --ignore-environment -c just lint`
- `nix develop --ignore-environment -c just unit-test`
- `nix-shell --run 'just --version'`
### Please check if the PR fulfills these requirements
* [x] Cheatsheets are up-to-date (run `go generate ./...`)
* [x] Code has been formatted (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#code-formatting))
* [x] Tests have been added/updated (see
[here](https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md)
for the integration test guide) — no test-code change needed; validated
with the commands above
* [x] Text is internationalised (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#internationalisation))
— no user-facing strings changed
* [x] If a new UserConfig entry was added, make sure it can be
hot-reloaded (see
[here](https://github.com/jesseduffield/lazygit/blob/master/docs/dev/Codebase_Guide.md#using-userconfig))
— no UserConfig entry added
* [x] Docs have been updated if necessary — no documentation change
needed
* [x] You've read through your own file changes for silly mistakes etc
Fixes#5879: with an external diff command configured, quickly
navigating between commits on Windows accumulates orphaned
`git.exe`/`difft.exe`/`conhost.exe` processes that keep computing their
diffs in the background and persist after lazygit exits.
Stopping a pty task on Windows relied on `ClosePseudoConsole`, whose
`CTRL_CLOSE_EVENT` only reaches clients *attached to the pseudoconsole
at that moment*. Attachment happens asynchronously during child startup,
so a task stopped within the first few milliseconds of its life — which
is exactly what rapid navigation produces — misses the event entirely
and survives, together with its whole process tree (git for Windows
spawns through a two-level git.exe wrapper, so a single task has several
attach windows).
The fix puts the child into a job object before it executes its first
instruction (created suspended → assigned → resumed), so every
descendant is in the job from the start. The pty teardown still closes
the pseudoconsole first and gives clients that received the close event
a moment (500ms) to exit through their own handlers — git's cleans up
lock files — and then terminates whatever is left in the job.
`JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE` doubles as a safety net: if lazygit
exits without running the teardown, the OS closes the job handle and
reaps the tree.
Validated with a harness that mimics lazygit's stop path with randomized
0–120ms stop delays: before the fix, 3 of 30 process trees survived as
permanent orphans per run; after it, three runs of 30 all came back with
zero orphans, with the job kill catching exactly the children that
missed the close event (6 of 90) while the rest still exited gracefully
through the event as before.
The pty teardown in Close runs on a background goroutine that doesn't
get to finish when lazygit is quitting: the process exits milliseconds
after the view buffer managers are closed. The job objects still cover
the clients -- KILL_ON_JOB_CLOSE reaps them when the process's handles
are rundown at exit -- but nothing reaps the conhost, so on Windows
builds whose conhost fails to run down on its own, quitting leaks one
conhost per live pty.
This is not a rare timing window: a diff longer than what has been
read keeps its git process (and thus its pty and conhost) running for
the entire time it is displayed, so that scrolling can read more.
Quitting while looking at a long diff is therefore the common case,
and with an external differ configured it leaks a conhost on affected
builds on almost every quit.
Fix this by having the gui's shutdown path wait synchronously for the
in-flight teardowns after closing the view buffer managers. A quit
signal makes the teardowns skip the conhost rundown wait -- the
conhost serves nothing once its clients are dead, and the exit must
not stall for its sake -- so the wait normally completes in
milliseconds, keeping quit as fast as before; a 2-second cap protects
the exit path even if a teardown wedges.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A pseudoconsole's conhost.exe is spawned by CreatePseudoConsole as a
child of lazygit, so it is not part of the job object that the pty
teardown kills. That is normally fine: a healthy conhost runs itself
down once the reference handle is closed and its clients are gone. But
conhost builds before the ConPTY overhaul that shipped with Windows 11
24H2 (confirmed on 23H2, build 22631) fail to complete the rundown
when a client attached after the close event was delivered and was
then killed -- the fate of exactly the clients the job kill exists for
-- and such a conhost lingers forever with no clients, at a rate of
about one per five fast commit navigations. These builds remain
widespread: all of Windows 10 (whose ESU tail runs into 2028, and
whose hardware often cannot run Windows 11 at all) plus pre-24H2
Windows 11 fleets.
Since Windows offers no way to obtain the conhost's pid or handle from
the HPCON, identify it by diffing lazygit's direct conhost children
around the CreatePseudoConsole call, serialized by a mutex so that two
concurrently starting ptys can't confuse each other's diff, and open a
handle immediately so that pid reuse is harmless. The teardown then
gives conhost a second to exit on its own before terminating it; on
healthy builds the wait succeeds and the reap never fires. If the
conhost can't be identified unambiguously, we simply don't reap, which
is no worse than before.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Stopping a pty task on Windows relies on ClosePseudoConsole, which
delivers CTRL_CLOSE_EVENT to the console's attached clients. But only
to those attached at that moment: when the user flicks quickly through
commits, a task is often stopped within the first few milliseconds of
its life, before the child has attached to the pseudoconsole. Such a
child misses the event and survives, running the entire diff to
completion in the background (spawning one external differ per changed
file) and keeping its conhost.exe alive; rapid navigation accumulates
these git/difft/conhost trees, and they outlive lazygit. Grandchildren
are affected too: git for Windows runs commands through a two-level
git.exe wrapper, so a single task has several attach windows, and a
grandchild spawned while the console is going down is orphaned even
when its parent got the event and exited.
Fix this by putting the child into a job object before it runs its
first instruction (created suspended, assigned, then resumed), so that
every descendant is in the job from the start; the teardown in Close
terminates the job right after initiating the pseudoconsole close.
There is no point in a grace period between the two: the close event
is not a graceful signal -- git and the common diff tools leave it to
the default handler, which calls ExitProcess at an arbitrary point --
so clients that received it are already dying, and the kill exists for
those that missed it. Killing at an arbitrary point cannot leak a
stale index.lock, because pty-rendered commands no longer take that
lock (see withPtyGitConfig in pkg/gui/pty.go).
The pseudoconsole close runs on its own goroutine because the kill
must not wait for it: on builds where ClosePseudoConsole blocks until
the console host exits (pre-24H2), the host keeps running as long as a
surviving client does, and that client only goes away through the job
kill; sequencing the kill after a blocking close would deadlock in
exactly the case the kill exists for.
KILL_ON_JOB_CLOSE doubles as a safety net: if lazygit exits without
running the teardown, the OS closes the job handle and reaps the tree.
In a harness that mimicked the stop path with randomized 0-120ms stop
delays, 3 of 30 process trees survived as orphans before this change;
none survive with it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The task stop path terminates the still-running command by pulling its
*os.Process out of the Cmd interface and applying one global strategy
(TerminateProcessGracefully) to it. That shape can't accommodate the
upcoming fix for orphaned process trees on Windows: there, stopping a
pty task requires terminating the entire process tree via a job object
whose handle lives with the pty, not with the process. And the two Cmd
implementations genuinely need different strategies anyway: a
process-group kill (the likely future fix for #5675 on Unix) is only
safe for pty children, which run as session leaders, while plain
commands share lazygit's own process group.
So let each Cmd implementation decide how to terminate itself, and drop
GetProcess, which had no other callers. No change in behavior.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
At the end of a diff against the worktree, git re-reads and refreshes
the index and writes it back if it found stale stat information
(diff.autoRefreshIndex, on by default). It holds index.lock for the
whole refresh; GIT_OPTIONAL_LOCKS does not cover this lock, and the
window scales with the size of the repository (~150ms for a 6k-file
repository with a warm stat cache).
On Windows, a pty task that is stopped because the user moved on
terminates its git process at an arbitrary point: tearing down the
pseudoconsole delivers CTRL_CLOSE_EVENT, which git leaves to the default
handler, which simply calls ExitProcess. If that lands inside the
refresh, a stale index.lock is left behind and the next git command
chokes on it. This is the same problem that 98801da106 fixed by no
longer killing git processes; the ConPTY support added in 0.63
reintroduced it through the close event.
Disable the automatic refresh for pty-rendered commands. They can afford
it: the refresh only persists refreshed stat information, and lazygit's
foreground git status refreshes -- which never run in a pty and are
never killed -- already write that back on every user action and on
terminal focus-in. The cost is that while the on-disk stat cache is
stale, an external differ is invoked even for files whose stat
information changed but whose content didn't, showing them as empty
diffs; this heals with the next foreground refresh, which also
re-renders the view.
Unix keeps the refresh: a stopped pty child gets SIGTERM there, and
git's signal handlers remove its lock files, so the lock window is
harmless. The rawGit renderer keeps it too: its tasks don't run in a pty
and are never killed on Windows -- they either run to completion or die
on a broken pipe mid-output, before the refresh begins.
At the end of a diff against the worktree, git re-reads and refreshes
the index and writes it back if it found stale stat information
(diff.autoRefreshIndex, on by default). It holds index.lock for the
whole refresh; GIT_OPTIONAL_LOCKS does not cover this lock, and the
window scales with the size of the repository (~150ms for a 6k-file
repository with a warm stat cache).
On Windows, a pty task that is stopped because the user moved on
terminates its git process at an arbitrary point: tearing down the
pseudoconsole delivers CTRL_CLOSE_EVENT, which git leaves to the
default handler, which simply calls ExitProcess. If that lands inside
the refresh, a stale index.lock is left behind and the next git
command chokes on it. This is the same problem that 98801da106 fixed
by no longer killing git processes; the ConPTY support added in 0.63
reintroduced it through the close event.
Disable the automatic refresh for pty-rendered commands. They can
afford it: the refresh only persists refreshed stat information, and
lazygit's foreground git status refreshes -- which never run in a pty
and are never killed -- already write that back on every user action
and on terminal focus-in. The cost is that while the on-disk stat
cache is stale, an external differ is invoked even for files whose
stat information changed but whose content didn't, showing them as
empty diffs; this heals with the next foreground refresh, which also
re-renders the view.
Unix keeps the refresh: a stopped pty child gets SIGTERM there, and
git's signal handlers remove its lock files, so the lock window is
harmless. The rawGit renderer keeps it too: its tasks don't run in a
pty and are never killed on Windows -- they either run to completion
or die on a broken pipe mid-output, before the refresh begins.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
We already excluded the most commonly used commit trailers from being
auto-wrapped when typing or rewording a commit message, but this was
limited to two hard-coded ones ("Signed-off-by:" and "Co-authored-by:").
Extend this mechanism to use a heuristic to prevent more trailers from
wrapping; the heuristic kicks in for any "Key: Value" line if Key
contains a dash, or the value looks like a URL (so that it also catches
things like "Bug: https://my-bug-tracker/345").
Fixes https://github.com/jesseduffield/lazygit/discussions/5869.
We already excluded the most commonly used commit trailers from being
auto-wrapped when typing or rewording a commit message, but this was
limited to two hard-coded ones ("Signed-off-by:" and "Co-authored-by:").
Extend this mechanism to use a heuristic to prevent more trailers from
wrapping; the heuristic kicks in for any "Key: Value" line if Key
contains a dash, or the value looks like a URL (so that it also catches
things like "Bug: https://my-bug-tracker/345").
To avoid mistaking a "Key: Value"-looking line in the message body for a
trailer, only apply the heuristic in the last paragraph of the message,
i.e. the block of lines at the end that is separated from the body by a
blank line. Each line there is judged on its own, so a line that isn't
recognized as a trailer still wraps without affecting the real trailers
next to it.
Having the cache in state.yml causes this file to be rewritten every
60s, which is annoying if you have a lazygit running in the background
somewhere without even realizing it, and it keeps overwriting the
foreground lazygit's newer command shell history and recent repos list
with its stale data. State.yml should only contain things that change in
response to user actions, not periodically.
Having the cache in state.yml causes this file to be rewritten every
60s, which is annoying if you have a lazygit running in the background
somewhere without even realizing it, and it keeps overwriting the
foreground lazygit's newer command shell history and recent repos list
with its stale data. State.yml should only contain things that change in
response to user actions, not periodically.
For a while now we have been showing Github icons in the branches panel
to indicate which branches have an associated pull request. This PR
changes this so that open PRs (which used to show a green Github icon)
now show a colored symbol indicating the combined state of the Github
checks (if any are configured for this repo):
<img width="1046" height="418" alt="image"
src="https://github.com/user-attachments/assets/3e9074a6-0ae4-423a-90d9-306863daa46c"
/>
This lets you see at a glance which of your PRs are ready to merge.
(Note however that this feature knows nothing about which of the checks
are _required_ for merging, so a branch showing a failure icon may still
be ready to merge if the failing checks are not required ones.)
It may be a little confusing for new users to see two green checkmarks
for a branch, one to the left of the name and one to the right; they
mean very different things. Still, seeing the Github checks state in the
branches list is so useful that I think it's a good compromise;
hopefully users will learn quickly enough what all the icons mean.
When selecting a branch that has a pull request, the main view already
showed some information about the PR (its title, pr number, and the
state (open/closed/merged). This PR adds an aggregated pull request
checks field to this, indicating the overall checks state
(passed/failed/pending/...). It has a hyperlink taking you directly to
the checks tab on Github.
<img width="1538" height="246" alt="CleanShot 2026-07-30 at 12 32 25@2x"
src="https://github.com/user-attachments/assets/68aa24da-d78a-45d7-8812-db8b509bbbc8"
/>
The update frequency of the checks badge is tied to the auto-fetch
cadence for now (once every minute by default); you can fetch manually
to force an update, and some user actions (including the focus-in
refresh) update the PR states too, but anything more fancy (e.g.
fetching just the checks state of the selected branch) would have been
more work, and I want to see if this is good enough.
In the branches list we show the checks icon (✓, ✗ etc) instead of the
gihub icon for branches that are open and have a state. It is a little
confusing, because the ✓ in front of the name means something very
different than the ✓ after it, but the checks status is just too useful
to see in the list.
In the main view we show it as a compact status before the PR title,
with a hyperlink that takes you directly to the checks tab in Github.
The branch controller should decide which pull request to show, not how its
header is styled and linked. Move the existing formatter and state badge next
to the branch presentation helpers so subsequent header changes stay in one
layer.
GitHub exposes a combined status for the head commit without requiring
individual check contexts. Include that rollup in the existing request
and startup cache so every consumer sees the same state without making a
second network request.
The fetch currently combines transport, JSON decoding, and model
conversion, which makes response changes difficult to verify without
exercising the network. Put the deterministic work behind a small parser
so later payload changes can be covered with raw GraphQL fixtures.
For a long time lazygit has used the term "custom pager" to refer to
what's really a "diff renderer". A pager is a program that allows you to
view output page by page (hence the name), e.g. less; lazygit's custom
diff renderers are not pagers. It used the term only because the feature
is implemented using git's `GIT_PAGER` env var, but that's an
implementation detail.
Rename the 'git.pagers' config to 'git.diffRenderers', and restructure
its elements while we're at it to make things clearer:
- Add a 'type' field to explicitly specify which type of diff renderer
it is (the two fundamentally different ones are 'stdinFilter' and
'extDiff').
- Add a third type, 'rawGit', which has an 'args' field that makes it
easy to use 'git diff --color-words' as a custom renderer
- Unify the old 'pager' and 'externalDiffCommand' fields to a single
'command' field for both types
Existing config files are migrated automatically.
For a long time lazygit has used the term "custom pager" to refer to
what's really a "diff renderer". A pager is a program that allows you to
view output page by page (hence the name), e.g. less; lazygit's custom
diff renderers are not pagers. It used the term only because the feature
is implemented using git's GIT_PAGER env var, but that's an
implementation detail.
Rename the 'git.pagers' config to 'git.diffRenderers', and restructure
its elements while we're at it to make things clearer:
- Add a 'type' field to explicitly specify which type of diff renderer
it is (the two fundamentally different ones are 'stdinFilter' and
'extDiff').
- Add a third type, 'rawGit', which has an 'args' field that makes it
easy to use 'git --color-words' as a custom renderer
- Unify the old 'pager' and 'externalDiffCommand' fields to a single
'command' field for both types
Existing config files are migrated automatically.
It doesn't matter for what this test used to test (that nothing changes
if the 'pagers' array exists), but it will be relevant once we further
migrate the 'pagers' array from there.
We don't want callers to need any additional logic, so pass in the
translation set so that the function can decide what static text to
return. This allows us to get rid of the CurrentPagerUsesGitConfigDiff
method which is in the way for the refactoring we're about to do.
It has served its purpose when config migration was initially
implemented, but nobody runs this benchmark nowadays, and the example
config has run out of date with reality. Some PRs have still updated it
when they made changes to the config, but others didn't, and it's
unclear what the rules are; so let's just remove it.
Pressing the left button on the current selection now starts a drag that
moves the selected commits, both in the normal commits view and for
todos during an interactive rebase. A press on an unselected row still
creates a range selection.
While dragging, a "drop here" indicator shows where the commits will be
inserted.
Moving commits with the mouse is useful for the case that you want to
move them a longer distance, because that's slow when doing it one by
one with the keyboard, and also you don't want to resolve conflicts at
every step. The standard workaround for that is to enter an interactive
rebase first and then continue it afterwards, but that's a bit
cumbersome; dragging solves that nicely.
Closes#5842.
Moving commits runs a rebase, which can take a while. Instead of
letting the drop indicator vanish the moment the button is released,
keep it in place and turn it into a "moving commits here" spinner once
the move takes longer than a short grace period, so that quick moves
stay free of flicker. The indicator is cleared when the post-move
refresh lands.
While a commit drag is in progress, escape now aborts it: the drag
state and the drop indicator are discarded and the mouse capture is
released, so nothing happens when the button is eventually released.
Otherwise escape keeps its normal meaning.
Reuse the drag autoscroller for commit drags. Scrolling stops once the
insertion point reaches the end of the allowed range in the scroll
direction, so during a rebase the view doesn't keep scrolling once the
last insertion position among the todos has been reached.
Pressing the left button on the current selection now starts a drag
that moves the selected commits, both in the normal commits view and
for todos during an interactive rebase. A press anywhere else falls
through to the usual click handling, so dragging from an unselected
line still creates a range selection, and releasing without having
moved collapses the selection to the pressed commit like a plain click
would.
While dragging, the insertion point follows the pointer: rows below
the dragged block insert after the pointed-at commit, rows above it
insert before it, and during a rebase the destination is limited to
the contiguous block of movable todos around the selection. gocui
moves the view cursor along with the pointer, so each drag event moves
it back to keep the original selection highlighted.
The move happens on release. The model may have been refreshed during
the drag, so the dragged commits are located again by their identity
(hash, subject, todo action); if they no longer form a unique
contiguous block, the drop is ignored rather than guessing.
Render the insertion point of a commit drag as a non-model item in the
commits list. It must be inserted at the right position relative to
the section headers, because the list renderer assumes non-model items
are ordered by their model index.
Not used yet, we'll hook it up to the drag gesture in the next commit.
Let the todo-move primitives take a distance instead of hardcoding a
single row, by iterating the one-row move in memory. Dropping a commit
several rows away thus rewrites the todo file once and, outside of an
interactive rebase, runs a single rebase rather than one per row.
Merge the up/down variants of the move commands into one
direction-parameterized implementation. Dragging commits is about to
need moves over arbitrary distances, which we don't want to build twice.
Like in the staging view, drag with the mouse in a list view to create a
non-sticky range selection (including auto-scrolling as the mouse
reaches the view edge).
Give the list views the same edge autoscroll during drag selection
that the staging view already has; the new mouse-release binding stops
the autoscroll when the drag ends.
Dragging with the left button held now extends the selection from the
pressed line, exactly like moving with shift+up/down does. We use the
non-sticky flavor so that the range collapses on the next plain cursor
movement, again matching the keyboard behavior.
The binding is only registered for contexts that support range selection
in the first place; dragging in other lists continues to do nothing.
The staging view (and custom patch building view) already has the
capability to create a range selection by dragging with the mouse;
however, a longer range couldn't be selected this way because the
dragging stopped at the view edge. Add auto-scrolling so that the view
scrolls as the mouse reaches the view edge; slowly on the innermost edge
row, faster on the outermost row and beyond. Scrolling starts after a
short delay so that a drag merely passing near the edge doesn't scroll.
When the pointer reaches the edge of the view during a drag (or leaves
the view entirely, which mouse capture makes possible), keep scrolling
and extending the selection: slowly on the innermost edge row, faster
on the outermost row, and very fast beyond. Scrolling starts after a
short delay so that a drag merely passing near the edge doesn't scroll.
When the view loses focus mid-drag (e.g. because a popup appeared),
cancel the autoscroll and the mouse capture.
Add press/move/release primitives next to the existing Click. The test
driver remembers the last reported position so a release doesn't have
to repeat the coordinates, and RepeatMouseMove lets a test verify that
a held-button motion event within the same cell has no effect.
Route all mouse events to the view that was under the pointer when the
left button was pressed, until the button is released. Previously each
event went to whatever view was under the pointer at the time, so a
drag that left the view's bounds started acting on neighboring views.
Since events can now carry positions outside the view, clamp the view
cursor to the view's bounds in that case (handlers still receive the
unclamped position), and require an actual click for tab activation so
that a captured drag crossing the tab row doesn't switch tabs.
Releasing a mouse button was delivered as a plain mouse-move (hover)
event: the release processing resets dragState to NOT_DRAGGING, after
which the event fell into the NOT_DRAGGING branch. Views therefore had
no way of telling that a drag gesture ended, which the upcoming
drag-based features (range selection, commit reordering) need.
Deliver the release as a real mouse event with the MouseRelease key
and normalize its modifiers to ModNone, so release bindings also match
modified drags. Make recordClickInfo ignore it: a release is the end of
a click, not a click of its own, and must not break double-click
detection.
Add a test pinning down that a press/release/press sequence at the
same position is detected as a double click. An upcoming commit starts
delivering the release as a real mouse event to the click-recording
code, which must not mistake it for a click of its own.
When the left button is pressed and the pointer then moves, the event
that made the MAYBE_DRAGGING -> DRAGGING transition fell through the
switch without being assigned a key or modifier, so the first cell of
every drag arrived at handlers as a MouseRelease event without the
motion modifier and was effectively lost. Give it the same
MouseLeft/ModMotion identity as all subsequent drag events.
Held-button motion events that stay within the pressed cell carry no
information at all; swallow them instead of letting them through as
further release-shaped events (which used to clobber the double-click
state when the pointer jittered within a cell between two clicks).
I'm not a skilled UI designer, so I suspect there may be even better
options, but it's definitely already better than the raw ASCII "---" we
had before.
Put the line only at the beginning because it looks bad if the line
after the label is misaligned when labels don't have the same width
(e.g. "Remote" vs. "Local" in the divergence view).
When selecting sibling directories sharing a common prefix, trying to
add them to a custom patch or discarding them from the commit would only
add one, not both. We had the same bug in the files panel and fixed it
in #3599, but forgot to make the equivalent change in the commit files
panel.
Fixes#5866.
The root item's path is ".", and the path of a file at top level is
"./file". When using GetPath, this gives us "." and "file",
respectively, and isDescendentOfSelectedCommitFileNodes would return
false for these.
Working with the internal paths (i.e. without stripping the leading
"./") fixes this.
There is no known breakage that is caused by this, that's why I'm not
adding an integration test that demonstrates a bug.
Equivalent to the change that was made to isDescendentOfSelectedNodes in
files_controller.go in 302b621b68.
It never changes inside this function, so there's no need to recompute
it with every loop iteration.
Equivalent to the change that was made to isDescendentOfSelectedNodes in
files_controller.go in d0c6e27fee.
When lazygit is running in a VS Code window that doesn't have the focus
(e.g. a split tab) and you click in the commits panel to focus it and
select a commit at the same time, it would briefly select the commit you
clicked but then flash back to the commit that was previously selected.
This PR fixes that so that the clicked commit stays selected.
This was only a problem with VS Code; in Zed's builtin terminal it
worked, apparently because it first dispatches the click and then the
focus-in event. Ghostty and iTerm2 were not affected because they don't
dispatch clicks in inactive windows or tabs at all.
Labelling as ignore-for-release because it fixes a regression that was
introduced since the last release.
This fixes the problem described in the previous commit; we no longer
capture the selection at the start of the refresh. There's no reason to
do that (we don't do it for branches either). It is enough to capture
the selection in the final bounce, before we assign the new model slice.
When clicking in the commits view of lazygit running in an unfocused VS
Code window, VS Code first sends us the focus-in event and then the
mouse-click. The focus-in refresh captures the selection when it starts,
then we handle the mouse click and you briefly see the clicked row
getting selected, but then the selection flashes back to the original
row as the refresh restores it when done.
CreatePseudoConsole and ResizePseudoConsole reject zero dimensions with
E_INVALIDARG, but we legitimately request them: the pty is sized after
the main view, and that view is zero-sized while hidden, e.g. in
full-screen mode with a side panel focused. Entering that mode while a
custom pager is configured therefore made StartPty fail (degrading to
unpaged output now that the fallback works), and resizing a live pty
from onResize would fail layout. The Unix pty accepts zero sizes, so
the clamp lives in the Windows implementation only.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
CreatePseudoConsole rejects zero dimensions with E_INVALIDARG, so
starting a pty sized after a hidden (and thus zero-sized) view fails.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
NewCmdTask feeds the reader returned by its start func into a
bufio.Scanner, and Scanner.Scan panics with a nil pointer dereference
when that reader is nil. Two start funcs could produce one:
- newPtyTask's fallback for a failed StartPty returned a literal nil
reader, alongside an ExecCmd that was never started, so the intended
"fall back to a plain cmd task" never worked. This crashed lazygit on
Windows when using a custom pager with the main view zero-sized, e.g.
after pressing + twice to enter full-screen mode with a side panel
focused: ConPTY rejects zero dimensions, making StartPty fail.
- startCmdWithPipe returned nil when the pipe couldn't be created,
which the Unix pty fallback path can trigger, since a failed pty
start can leave the tty assigned to the command's stdout.
Make startCmdWithPipe never return a nil reader: when the pipe can't be
created, don't start the command at all and return an empty reader so
the task shuts down cleanly with the error in the log. Then route
newPtyTask's fallback through it, so a StartPty failure degrades to
running the command without a pty: the pager is lost, but the command's
output still renders.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
NewCmdTask feeds the reader returned by its start func straight into a
bufio.Scanner, whose Scan panics on a nil reader with a nil pointer
dereference. startCmdWithPipe returns exactly that when the pipe cannot
be created.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The fallback path in newPtyTask (taken when StartPty fails) needs the
same start-the-command-with-a-pipe logic that newCmdTask uses, so pull
it out into a helper that both can share. No behavior change.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A refresh from the UI thread returns immediately and applies its model
and view updates as queued UI-thread callbacks. A key pressed before
those have run is handled against the stale, pre-refresh state. For most
keys that's harmless, but some handlers turn that state into git
commands: pressing space twice in quick succession in the staging panel
builds the second patch from the already-applied diff and fails with
'patch does not apply', because the refresh after the first press is
what moves the selection to the next stageable hunk.
Notably, this is not just a regression of the recent change that made
UI-thread refreshes non-blocking; the window was merely much narrower
before. A blocking refresh parked the UI thread while the scopes'
bounces were queued, and the event loop drains pending keyboard input
with priority over queued user events, so a key pressed during the
blocked window still beat the queued state updates. The guarantee that
the next keypress sees post-refresh state had already ended when the
scopes' state updates moved from worker-side mutex-guarded writes to
UI-thread bounces.
Fix it with the input-blocking mechanism we already use for commit
surgery, exposed as a new RefreshBlockingInput entry point: it begins
blocking events synchronously in the calling handler, and ends the block
from a callback that the finishing step queues behind the refresh's own
updates. Keys pressed while the refresh is in flight are buffered and
replayed, in order, against the fully refreshed state; since a replayed
key's handler re-enters this same path, a burst of keypresses applies
sequentially, each one seeing the previous one's refresh. Unlike the old
blocking refreshes, this doesn't freeze the UI thread: rendering,
spinners, resizing, and mouse scrolling keep working while input is
withheld.
Blocking input is opt-in per call site rather than the default for all
UI-thread refreshes, because most refreshes (the focus-in and startup
refreshes, say) don't produce state that the next keypress depends on,
and blocking on them would delay typing for no reason. It should also be
limited to quick, narrow-scoped refreshes: a full refresh, or any scope
that pulls in COMMITS, can take very long in large repos and should
usually not hold up input.
Use the new function for the staging panel's stage/discard/edit-hunk
refreshes, for moving rebase todos, and for stash operations.
Labelling as ignore-for-release because it fixes regressions introduced
after the last release.
On startup we don't want to block input during the initial refresh (it
should be possible to press, say, `4` to jump to the commits panel right
after startup without a delay), and we also want panels to show their
contents as soon as possible; it doesn't matter so much that it's not in
sync, we go from empty to populated here. However, when switching repos
it can be confusing that some panels that are slow to update still show
the old repo's data while others already show the new one's data, so
update the UI only when everything is ready, and also block input to
prevent accidentally trying to act on the old, stale data.
Popping or dropping a stash shifts the indices of the entries below it,
and renaming re-creates the stash at the top, shifting all the others.
The stash model is only rebuilt by the refresh, which finishes in the
background, so acting on the next entry in quick succession — pressing
the key, confirming the popup, and pressing again right away — reads the
stale pre-operation indices and targets the wrong stash. Note that the
confirmation popup is no protection here: the race starts when the
confirm handler runs, and the next keypress can easily beat the refresh.
Use RefreshBlockingInput so a quick follow-up keypress is buffered and
replayed once the refreshed stash list is in place.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Moving a todo rewrites the todo file and advances the selection
synchronously, but the commits model is only rebuilt by the refresh. A
second press arriving before that grabs the swapped-with todo from the
stale model at the advanced index and moves it back, so holding the key
to move a todo several slots misbehaved. Use RefreshBlockingInput so the
second press is buffered and replayed once the moved todo list is in
place.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Moving a todo up or down rewrites the todo file and advances the
selection synchronously, but the commits model is only rebuilt by the
refresh, which finishes in the background. A second keypress arriving
before that reads the pre-move model at the advanced selection index —
that's the todo the first move swapped with, so the second press moves
that one back instead of moving the selected todo further. Two rapid
presses (e.g. from holding the key down) thus amount to a net no-op.
The two presses also spawn two racing refreshes whose model updates can
land in either order, so the todo list can even end up disagreeing with
the todo file. That's why the test continues the rebase and asserts the
resulting commit order instead of the displayed list: the rebase replays
the file, which is deterministic.
The test documents this currently broken behavior; the fix comes next.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A refresh from the UI thread returns immediately and applies its model
and view updates as queued UI-thread callbacks. A key pressed before
those have run is handled against the stale, pre-refresh state. For most
keys that's harmless, but some handlers turn that state into git
commands: pressing space twice in quick succession in the staging panel
builds the second patch from the already-applied diff and fails with
'patch does not apply', because the refresh after the first press is
what moves the selection to the next stageable hunk.
Notably, this is not just a regression of the recent change that made
UI-thread refreshes non-blocking; the window was merely much narrower
before. A blocking refresh parked the UI thread while the scopes'
bounces were queued, and the event loop drains pending keyboard input
with priority over queued user events, so a key pressed during the
blocked window still beat the queued state updates. The guarantee that
the next keypress sees post-refresh state had already ended when the
scopes' state updates moved from worker-side mutex-guarded writes to
UI-thread bounces.
Fix it with the input-blocking mechanism we already use for commit
surgery, exposed as a new RefreshBlockingInput entry point: it begins
blocking events synchronously in the calling handler, and ends the
block from a callback that the finishing step queues behind the
refresh's own updates. Keys pressed while the refresh is in flight are
buffered and replayed, in order, against the fully refreshed state;
since a replayed key's handler re-enters this same path, a burst of
keypresses applies sequentially, each one seeing the previous one's
refresh. Unlike the old blocking refreshes, this doesn't freeze the UI
thread: rendering, spinners, resizing, and mouse scrolling keep working
while input is withheld.
Blocking input is opt-in per call site rather than the default for all
UI-thread refreshes, because most refreshes (the focus-in and startup
refreshes, say) don't produce state that the next keypress depends on,
and blocking on them would delay typing for no reason. It should also be
limited to quick, narrow-scoped refreshes: a full refresh, or any scope
that pulls in COMMITS, can take very long in large repos and should
usually not hold up input.
The staging panel's stage/discard/edit-hunk refreshes use it now.
Pressing space twice in quick succession in the staging panel is supposed
to stage two hunks: the refresh triggered by the first press rebuilds the
panel's diff and moves the selection to the next stageable hunk, and the
second press stages that.
Since we made UI-thread refreshes non-blocking, the second press is
handled as soon as it arrives, while that refresh is still in flight. It
then reads the stale pre-refresh diff, builds the first hunk's patch
again, and git apply fails with 'patch does not apply' because those
lines are already in the index.
The test documents this currently broken behavior; the fix comes next.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The test driver waits for lazygit to become idle after every keypress, so
tests could never exercise what happens when a key arrives while the
previous key's processing is still in flight — for example while the
refresh triggered by the previous key hasn't updated the model yet. Real
users type faster than that all the time.
PressRapidly injects all its keys back to back and waits for idle only
once at the end, so the second and later keys are queued before the first
one's processing has finished. The next commit uses this to demonstrate a
bug in exactly that scenario.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A few comments still reasoned in terms of SYNC vs ASYNC refreshes, a
distinction that no longer exists: sync vs async is now derived from the
calling thread. Restate them in terms of the current mechanisms
(RefreshFromWorker blocking its worker, model updates being enqueued on
the UI thread) without changing any behavior.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Checking out a remote branch that has no local counterpart creates the
local branch, refreshes, and then checks it out. The refresh exists so
that CheckoutRef finds the new branch in the model and attaches an inline
status to the branch item instead of showing a global waiting status. But
since UI-thread refreshes stopped blocking, the checkout started before
the refreshed branches had landed in the model, so the lookup failed and
we always got the waiting status. Run the checkout from the refresh's
Then, which is queued behind the model update.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Make the background fetch and the refresh that runs after it more safe
against racing with a concurrent foreground repo switch (i.e. switching
worktrees, repos, or submodules). This fixes a bunch of different
problems; see the individual commit messages for details.
gui.git, gui.helpers and gui.State are all replaced on a repo switch,
which runs on the UI thread. The background fetch and the external-
change poller read them from their own goroutines, racing the
reassignment. This race can't show up in the integration suite, which
doesn't enable the background routines, so no -race run will ever flag
it; it can only bite real users who switch repos while a background
fetch or poll is in flight.
Capture the objects a routine iteration needs in a single blocking
UI-thread hop before using them, the same pattern the refresh's input
capture uses. For the fetch this has two welcome side effects: the
fetch, the post-fetch refresh's generation baseline, and the recorded
fetch time now all refer to the same repo (the old comment documented
the timestamp's mismatch as a known, unguarded race), and the git
instance the fetch runs through is pinned to that repo's directory, so
a switch mid-fetch can no longer direct in-flight work at the new repo.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
PostFetchRefresh's refresh is the only background refresh carrying a
Then callback, and Then callbacks are not generation-guarded: when the
background fetch's refresh crossed a repo switch, the callback still
ran — in the new repo — and auto-forwarded the new repo's branches
because the old repo's fetch had completed. That was harmless in
practice (the update-ref call compares against the expected old value,
and it only does what the next fetch's auto-forward would do anyway),
but mutating refs in a repo whose fetch never happened is not an action
the user took. Skip the auto-forward when the repo generation changed
since the fetch started.
The generation is captured by the fetch's callers before the fetch
runs, not by PostFetchRefresh itself: the background fetch doesn't
block repo switching and is a network call, so by the time
PostFetchRefresh runs a switch may already have happened — a capture
there (or the one the refresh itself takes) would compare against the
new repo's generation and let the auto-forward through. For the manual
fetch the capture point makes no difference, since a foreground
operation blocks repo switching for its entire duration.
This deliberately guards only this call site rather than making Then
callbacks generation-guarded in general: a Then is an arbitrary
callback, and whether it is safe to skip on a repo switch is a decision
for the author of the call site.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The cached git config runs its `git config` reads through raw
exec.Command calls, outside the pinned git command builder, so they
followed the process working directory. A cache miss on a stale
instance — one still in use by a refresh that crossed a repo switch —
would therefore read the new repo's local config while computing data
for the old one. Give the cache a directory, set once by NewGitCommand
right after it determines the repo paths (the object is created fresh
for every repo switch, so no cross-repo cache invalidation is needed),
and run every config command there.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The refresh workers read a few files at paths relative to the process
working directory: the submodule config read of .gitmodules, the files
refresh's check for conflict markers, and the submodule stash's
existence check. Git commands are pinned to the repo their instance was
created for, but these Go file reads still followed the cwd, so a
background refresh crossing a repo switch would read the new repo's
files while computing data for the old one. Join them with the worktree
root of the instance they belong to. (Most git-state file reads —
working tree state, rebase todos, bisect info — already resolve
against RepoPaths and need no change.)
This also fixes the submodule stash's existence check for nested
submodules: it stat'ed submodule.Path, which is relative to the parent
module, against the repo root — now it uses the submodule's full path,
matching the stash command right below it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The refreshes on focus-in, right after a repo switch, and after
returning from a subprocess are full foreground refreshes, so their
tasks kept Busy() true for as long as the slowest scope took — and any
switch attempt in that window was refused with the "can't switch"
toast. The focus-in one is particularly annoying: focusing lazygit is
often precisely what the user does in order to switch repos, and right
after regaining focus is when a refresh takes longest.
Blocking the switch bought nothing there. The refusal exists for user
operations, whose follow-up work (e.g. a Then callback reading the
model) isn't covered by the switch-safety guards; but these refreshes
merely reload state, and a refresh by itself is now switch-safe: its
git commands run against the repo it was started for, and the
generation guard drops its updates when the repo changed.
We can't just mark them Background, because that flag also decides
whether the files refresh lets git take optional locks to persist its
refreshed stat cache — worth doing for an attended refresh, and the
focus-in refresh (typically running right after external changes) is
the case that profits most. So split the two meanings: a new
DontBlockRepoSwitch option dispatches the refresh's tasks as background
tasks (excluded from Busy()) while keeping the attended optional-locks
behavior. Combining it with Then panics, since Then is not
generation-guarded.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
An error returned from a gocui worker is shown to the user in an error
popup. For the branch loader's behind-counts worker that used to be the
"no such ref" popup when a background refresh crossed a repo switch:
the old repo's main branch didn't exist in the new repo. The previous
commits fix that scenario properly — the command now runs against the
repo the refresh was started for — but a stale worker can still fail
legitimately, most plausibly because that repo was deleted after
switching away from it (e.g. removing a worktree). Its results are
dropped anyway, so log the error instead of alarming the user about a
repo they already left.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A background refresh's model writes are dropped by the generation guard
when the repo is switched mid-flight, but its git commands kept running
— and because the refresh read the live git instance at each step, any
command issued after the switch ran against the new repo. Now that git
commands are pinned to the directory of the instance they were built
from, capture the instance once when the refresh starts and run every
scope's git work through it, so a switch-crossing refresh keeps
addressing the repo it was started for.
The instance is captured together with the repo generation, on the UI
thread (where repo switches run), so the pair can't straddle a switch:
an old instance paired with the new generation would compute data from
the old repo and write it into the new repo's model unguarded.
This also removes the refresh workers' unsynchronized reads of the live
instance pointer, which raced its reassignment on the UI thread when a
background refresh crossed a repo switch (foreground refreshes can't
cross one: they keep Busy() true, which refuses the switch).
Two reads keyed app-state by the live instance's repo path on a worker
and now use the captured instance, fixing which repo they file under
when crossing a switch: the pull-request cache, and the "user dismissed
the base-remote prompt" flag. The base-remote menu's handlers keep
reading the live instance: a switch dismisses any open popup, so they
can't run against the wrong repo (and the OnPress body runs under a
foreground task, which blocks switching anyway).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Lazygit changes the process working directory when switching repos, but
work that is still in flight for the previous repo can keep spawning
git commands after the switch — most notably a background refresh. Its
model writes are already dropped by the repo generation guard, but its
git commands would now run against the new repo. That is wasted work at
best; at worst it surfaces spurious error popups (the behind-base-
branch computation failing with "no such ref" when the old repo's main
branch doesn't exist in the new one) and pollutes caches belonging to
the old repo's reusable state (e.g. MainBranches' existing-branches
cache), which the user sees when switching back.
Give the git command builder the directory of the repo it was created
for, and pin every command it produces to that directory. The pinned
directory and the process cwd are identical until a switch happens
(NewGitCommand chdirs to the worktree path right before creating the
builder), so nothing changes in the steady state; the pin only takes
effect for commands built through a previous repo's GitCommand instance
after a switch, which now keep addressing the repo they were built for.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
When the user picks a base remote in the "select remote repository"
prompt, we called setGithubPullRequests directly, bypassing the refresh
machinery — which meant hand-rolling the refresh env that call needs
(with a comment explaining why), and fetching against the branches
captured when the prompt was created. Issue a PULL_REQUESTS-scoped
refresh instead: it re-reads branches and remotes (both fast even in
large repos), fetches against those fresh values, and gets the refresh
machinery's guarantees without any special-casing. The config write is
re-read by the refresh from git config, so it is guaranteed to be
picked up.
The waiting status now covers the config write and the branches/remotes
reload, while the GitHub request itself continues as a background task
— which is how every other pull-request fetch behaves.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Deleting a nested submodule (and updating its URL) chdir'd the whole
process into the parent module, ran its git commands there, and chdir'd
back. Only those commands need to run there, and a process-wide chdir
leaks the parent module's directory into any command another goroutine
spawns during that window (e.g. a background refresh's). Set the
directory on the commands themselves instead.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
To spot slow or anomalous tests across CI runs, record each test's run
duration when LAZYGIT_TEST_TIMING is set (to a file path);
run_integration_tests.sh prints them at the end, sorted by slowest
first. CI sets it for all integration jobs.
The harness appends to a file rather than writing to stdout/stderr
because `go test` captures those and only surfaces them with -v, which
would drown the signal in every test's verbose logs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The watchdog only log.Fatal'd with a message, so a hung test told us
that it timed out but not where it was stuck -- useless for diagnosing
an intermittent deadlock under the race detector. Dump all goroutine
stacks to stderr first (the harness surfaces this process's stderr on
failure), turning a bare timeout into an actionable stack trace.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add one extra integration-tests job that runs the whole suite under the
race detector. A `race` matrix dimension (default false) plus an include
entry adds a single git-latest job with LAZYGIT_RACE_DETECTOR set; races
live in lazygit's own Go code rather than in git, so one git version is
enough, and using latest skips the git-build steps.
The race job skips coverage collection: it's redundant with the non-race
latest job and would only slow the -race build down further.
Go's default 10-minute timeout was enough for running integration tests
normally (both locally and on CI), but with race detection turned on
they can take much longer to run. Increase the timeout unconditionally
to 30 minutes; we don't bother making a distinction between race vs.
normal, because a longer timeout doesn't hurt (I can't recall having hit
the global timeout ever; and we still have the per-test watchdog that
kills an individual test after 40s).
The integration test watchdog fails a test if its recording takes longer
than 40 seconds. Under the race detector everything runs several times
slower, so legitimately slow tests (e.g. a conflicting interactive
rebase) blow that budget and fail even though nothing is actually stuck.
Key the timeout off a build-tag constant: the `race` tag is set
automatically when the binary is built with -race, so a race build gets
a 5x-longer budget while a normal build is unchanged, and the two can't
drift apart the way a runtime flag would. The base 40s stays in one
place; only the multiplier varies by build.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When lazygit exits but leaves behind a subprocess that inherited its
stderr pipe and has detached from the pty, cmd.Wait() blocks in
awaitGoroutines waiting for that pipe to reach EOF -- which never
happens while the straggler is alive. With no WaitDelay set, that wait
is unbounded, so a single leaked process hangs the whole test binary
until the 10-minute global timeout fires and panics. Worse, the timeout
discards whatever lazygit wrote to stderr before exiting (a panic, a
-race report), which is exactly the output needed to diagnose the
failure.
This surfaces under -race, where lazygit runs slow enough to widen the
window for a spawned command to still be alive when lazygit quits, and
it's a blocker for enabling the race detector on CI.
Bound the wait with cmd.WaitDelay so Wait force-closes the pipe and
returns ErrWaitDelay instead of hanging, surface the captured stderr as
the error (falling back to the wait error when nothing was printed), and
kill the child's process group on failure so a straggler can't linger
into a later test or pile up across a run.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When pressing ctrl+z to suspend lazygit, and then `fg` to bring it to
the foreground again, sometimes it wouldn't come to the foreground,
stalling in the background with one core using 100% CPU.
Fixes#5309.
The previous two commits stop gocui from flushing while suspended, but
that guard cannot be fully airtight from gocui's side: it is a
check-then-act on the suspended flag, so a flush racing the suspend
itself (e.g. from a spinner goroutine) could still reach the screen
just as it disengages, and tcell's disengageFinish mutates the cell
buffer without holding the screen lock. Upstream now closes this at
the source (gdamore/tcell#1139): draw() returns immediately on a
disengaged screen, and the draw scan loop can no longer stall on the
width-0 cells that a released cell buffer reports (#5309).
The delta over the previously pinned snapshot is these two fixes, a
CSI R input decode fix, a wasm packaging chore, and dependency bumps.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Until now the repaint after fg was accidental: it only happened because
the suspend keybinding handler still had a flush pending on the UI
thread, and only if that flush happened to run after the SIGCONT
handler had re-engaged the screen. Now that flushes are skipped while
suspended, losing that race would leave the screen blank until the next
input event arrives, so schedule a redraw explicitly (#5309).
When suspending with ctrl+z, the suspend keybinding handler disengages
the screen and then sends SIGSTOP to the process group, so the UI
thread freezes at the return from kill(2) with the handler's follow-up
flush still pending. When fg continues the process, that pending flush
races the SIGCONT handler's Resume. If the flush wins, Show() draws
against the disengaged screen, whose cell buffer tcell has released to
0x0 while its width/height still hold the old size; drawCell() then
reports width 0 for the out-of-range cell, the draw loop's
'x += width - 1' never advances, and the UI thread spins forever while
holding the tcell screen lock. Resume in turn blocks forever on that
lock, so the screen never re-engages and no input is ever read again:
the hard stall of #5309, only recoverable by killing the process.
Guard both flush paths with the suspended flag. For the flag to
guarantee that the screen is engaged whenever it is false, Resume must
clear it only after re-engaging (it used to clear it before); Suspend
already sets it before disengaging. This also covers the pre-existing
unsynchronized suspended check in draw(), which is subsumed by the
guards and can go.
The regression test cannot use the demonstrate-then-fix pattern: on
unfixed code the flush goroutine spins holding the screen lock, which
deadlocks any subsequent screen call including the test cleanup's
Close().
When lazygit is suspended with ctrl+z and brought back with fg, nothing
deliberately triggers a redraw. The screen only repaints because the UI
thread happens to have a flush pending from the suspend keybinding, and
that flush races the SIGCONT handler's resume; when it loses in the
right way, the terminal shows a blank screen until the next input event
arrives (#5309).
Grep-based navigation needs manual filtering for the many colliding
method names in this codebase, while gopls answers reference and
implementation questions type-aware and exactly. Scope the guidance to
the symbol tools and keep grep for textual searches: gopls' own MCP
instructions prescribe running vulncheck at session start and
go_file_context after every file read, which costs more than it helps
here. The server is registered per user and machine, so sessions
without it must just fall back to grep rather than try to set it up.
The command log is supposed to show only commands initiated by the user;
these are commands that we run to get information for rendering, so they
pollute the log and are confusing.
Fix two problems that would prevent switching repos or worktrees while a
background fetch was running, especially when the network is very slow
and the fetch takes long. See commit messages for details.
Labelling as ignore-for-release because it fixes a regression that was
introduced after the last release.
Each status used to start a spinner render loop of its own, running on
a worker that inherited the foreground/background flavor of the
status's owner, and exiting only once the entire status stack was
empty. That shape had a real bug: a foreground operation's loop could
be kept alive by someone else's status. Finish a quick operation with
a waiting status while a background fetch's "Fetching..." status is
still showing, and the operation's render loop — a foreground worker
task — keeps ticking until the fetch ends. Busy() stays true for that
whole time, so repo switching is refused even though nothing is in
flight anymore; with a fetch hanging on a slow network, that means
minutes. The shape was also wasteful: overlapping statuses were each
drawn by their own loop (plus a duplicate whenever a task was paused
and resumed while another status was showing), all redundantly
redrawing the same top status.
Replace the per-status loops with a single loop owned by the status
stack as a whole: whoever shows the first status starts it, and it
exits after drawing a final empty frame once the last status is
removed. The claim/release methods on StatusManager keep the loop
flag's transitions atomic with the stack under the one mutex, so a
status added while the loop is about to exit starts a fresh loop
instead of going unrendered.
The loop always runs as a background task now: rendering issues no
git commands, so it never needs to block repo switching, and a
foreground operation's busy-ness is already carried by its own worker
task. This is what fixes the bug above, and it retires the need to
thread a foreground/background flag through the waiting-status
helpers altogether.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The http.Client used for fetching pull requests had no timeout, so on a
network that silently drops packets a request could stay in flight
until the OS-level TCP timeouts kick in, which can take many minutes.
The fetch has no visible status, so nothing tells the user it is still
running; bounding it keeps the refresh's worst case short, and the next
refresh simply tries again.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Every full refresh includes the PULL_REQUESTS scope, and the worker it
spawns inherited the refresh's foreground/background flag. Full
foreground refreshes happen at startup, after switching repos or
worktrees, and when the terminal regains focus, so the GitHub API
request ran as a foreground task there, keeping Busy() true until it
completed. On a healthy network that's a few hundred milliseconds and
nobody notices; on a very slow one the request can stall for minutes,
and every attempt to switch repos in that window was refused with
"Can't switch repositories while an operation is in progress" even
though lazygit looked completely idle. (The request has no visible
status; at most, a background fetch hanging on the same bad network was
showing its "Fetching..." spinner, pointing the blame at the wrong
operation.)
The switch-safety guard only needs to wait for operations whose
remaining git commands would run against the wrong repo after a switch.
The pull-request fetch runs no git commands at all, and its model
writes are dropped when the repo generation has changed in the
meantime, so there is no reason for it to block switching.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Several fixes for the last concurrency problems we still had: we used to
access view properties on worker threads, which isn't allowed (writing
to a view itself is fine and guarded by a mutex, but other fields are
not, and even that mutex had a few holes that are plugged here).
With this, our integration test suite seems to be fully deterministic
and race-free, so we also remove the retry safety net (MaxAttempts=2)
that we were using to address flakiness.
Now that we solved all known concurrency issues and our tests should be
100% deterministic, reduce MaxAttempts to 1 so that tests fail
immediately. We don't want to paper over existing flakiness any more.
The bounce model requires that a worker never touch UI-thread-owned
state: it should capture what it needs on the UI thread and pass that
in. Guard the two central accessors -- Model() (the git model) and
Context() (the context manager, which owns the mutable
current-context/stack) -- with a debug-only panic when they're called
off the UI thread. Since the integration tests run with -debug, a stray
worker access now fails deterministically and points at itself, rather
than surfacing later as a probabilistic data race.
One supporting change make the assertion usable: the integration test
driver inspects gui state from the test goroutine, so
GuiDriver.CurrentContext reads the context manager directly rather than
through the now-guarded c.Context().
Contexts() (the registry of context objects) is deliberately left
unguarded: workers legitimately fetch a context to grab its mutex or
check identity, so a blanket assertion there would flag safe accesses.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
hasExecTodos reads Model().Commits. genericMergeCommandImpl evaluates it
when deciding whether to use a subprocess, and on the recursive auto-skip
path that runs on a worker -- so the read raced the UI thread. Bounce it
onto the UI thread there, keyed off the calledFromWorker flag the function
already carries (on the UI-thread entry path the read stays inline).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The file-path suggestions trie is rebuilt asynchronously and then read by
the suggestions search, which runs on an AsyncHandler worker. It lived in
Model().FilesTrie, so that worker read the (UI-thread-only) model. Move
it to an atomic pointer on the SuggestionsHelper instead: it's the only
place that uses it, the helper is recreated per repo (so the cache still
resets on a repo switch), and an atomic pointer is safe to store from the
build and load from the search worker.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The "merge conflicts" refresh scope ran on a worker like the others, but
unlike them it does UI work rather than git work: RefreshMergeState reads
the current context and renders (or escapes) the merge-conflicts view.
Reading the context manager and rendering from a worker races the UI
thread. Bounce it onto the UI thread with onUIThreadUnlessRepoChanged,
exactly as the staging and patch-building scopes already do.
Running on the UI thread also lets EscapeMerge push the files context
directly instead of deferring the push to a separate UI task; it only
needs to drop the merge-conflicts mutex first, because the push
renders the newly focused file, which can take the mutex again. The
deferred push could lose a race against the same refresh's prompt to
continue the rebase/merge: if the prompt opened between
RefreshMergeState and the deferred push, the push declined to cover
the popup and was dropped, so closing the prompt landed the user in
the emptied merge conflicts view.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
RefreshSuggestions dispatched to an AsyncHandler worker that read
State.FindSuggestions and the prompt's TextArea (via GetPromptInput)
from the worker goroutine. The main thread rewrites both in
preparePromptPanel when it (re)creates a prompt panel, so an in-flight
suggestions worker races those writes -- two data races surfaced under
-race (filter_by_path/reword_commit_in_filtering_mode).
Capture both on the UI thread (RefreshSuggestions is only ever called
from UI-thread handlers) before dispatching to the worker. This is also
more correct: we search for the input as it was when dispatched, which
is what this request's AsyncHandler id corresponds to.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Dropping a range of stashes ran a refresh after each drop. A refresh
issued from the UI thread does its git work on a worker and applies the
model update in the background, so firing one per iteration let the
workers race: an earlier drop's refresh (which read a stash list that
still contained a later-dropped entry) could apply its result last,
leaving the stash view showing an entry that git had already removed.
Refresh once, after all the drops, so a single worker reads the final
stash list. The indices are captured up front and dropped highest-first,
so the remaining lower indices stay valid without an intervening
refresh. It's also cheaper: one `git stash list` instead of one per
entry.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
moveMainContextToTop copies the current top view's content into the view
it's promoting, to avoid a flicker. The source can be a main view with a
live streaming task (e.g. resolving a conflict promotes the merge-conflicts
view over a main view that's mid-diff), and CopyContent both read and
published that source's buffer unsafely:
- it read the source's lines/viewLines while locking only the
destination, racing the task's concurrent Write; and
- it aliased the source's row slices into the destination, so the
source's ongoing appends (growslice reading the shared array) and
refreshViewLinesIfNeeded's in-place wrapping-cache writes (&lines[i])
kept racing this view's rendering after the copy.
Lock the source for the read, and shallow-clone the row slices so the
destination gets its own arrays. The per-row cell data is immutable once
written, so it stays shared -- the clone cost is proportional to the
number of rows, not their contents.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The patch-building scope ran RefreshPatchBuildingPanel directly on the
refresh worker, where it read the commit-files selection and set the patch
view's origin off the UI thread — the latter raced the UI thread's draw.
Bounce it onto the UI thread, exactly as the staging panel just above
already does, guarded on the generation so a repo switch drops it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The custom-patch git operations (move/pull/delete patch, and their rebase
continuations) run on worker goroutines and call PatchBuilder.Reset when
they've consumed the patch, clearing To and the fileInfoMap. Meanwhile the
UI thread reads that state every layout — the options bar and the mode
indicator both call Active() — so the reset raced the render.
Add a mutex. The map's entries are only ever touched on the UI thread, so
the lock only has to serialize the To field and the fileInfoMap pointer:
readers snapshot the pointer under the lock and iterate the local, and
getFileInfo drops the lock across its git diff I/O rather than holding it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The test harness enqueued ErrQuit after a test finished, waited for the
program to go idle, then slept a fixed second and declared "gocui should
have already exited" if it hadn't. That fixed grace is fragile: under the
race detector the shutdown legitimately takes longer than a second, so
nearly every test failed with that message even though nothing was wrong.
Wait for the main loop to actually return instead. gocui now closes a
loopExited channel when MainLoop exits, and the harness blocks on it; the
existing 40s watchdog still fails a test whose loop genuinely never quits.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
PopupMutex guarded CurrentPopupOpts against a popup being created on a
worker goroutine while the UI thread deactivated it, or reset it on a
repo switch. Now that popup and menu creation is bounced onto the UI
thread, every access to CurrentPopupOpts — create, deactivate, and the
reset-on-switch (which already runs on the UI thread) — happens on the
one goroutine, so the mutex protects nothing.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Raising a popup or menu pushes a context and mutates the popup views, so
it must happen on the UI thread. But it can be triggered from a worker
goroutine — for example a WithWaitingStatus handler that hits a merge
conflict and calls PromptForConflictHandling, or a worker that shows a
confirmation — where it raced the UI thread's layout and draw code.
Bounce the creation onto the UI thread at the one point where the popup
and menu producers are injected into the popup handler, so every caller
stays oblivious to the threading. For a caller that is already on the UI
thread this adds no delay: the main loop drains the enqueued closure in
the same event-processing cycle, before it draws.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When a command task reaches EOF it runs onEndOfInput, which reads the
view's line height (and thus its dimensions) to decide whether to scroll,
sets the view's origin, and flushes stale cells. Reading the dimensions
and setting the origin are UI-thread-only, but this ran on the task's own
goroutine, racing the UI thread. Bounce onEndOfInput onto the UI thread,
as we already do for the new-task origin reset. It's once per render, so
it doesn't add the per-line UI-thread churn that streaming the content
would.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A view's line buffer, its viewLines/tainted flags, and its hover state
are all written from the command-task goroutine (under writeMutex) as it
renders. But three accessors reached that same state from the UI thread
without the lock: SetView and the GUI-resize path cleared a view's lines
directly, viewsToRedrawContentOnly read the tainted flag, and Buffer read
the line buffer. Each raced a rendering task.
Guard them with writeMutex, matching the view's other buffer accessors.
These are reads/clears of state writeMutex already protects, not new
callers of it -- the view's geometry stays outside the mutex.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A command task streams its output into a view from its own goroutine. To
track soft-wraps (so cursor-positioning escapes from a pager land on the
right line) the write path read the view's live InnerWidth, and the pty
setup read its InnerSize -- both off the UI thread, racing the UI thread
mutating the view's dimensions during layout.
Capture the width on the UI thread instead and hand it to the task: the
escape interpreter keeps a screenColMax it reads from, seeded in NewView
and refreshed per render via View.SetContentWidth (called from
newCmdTask/newPtyTask before the task's goroutine starts), and the pty
size is computed in the after-layout callback rather than in the task's
start func. The view's dimensions stay UI-thread-only; the task uses the
snapshot rather than reading them live.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The throttle flag is set from the goroutine that watches a task for
being stopped, and read when the next task starts up -- two different
goroutines, so the plain bool field was a data race.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The readLines channel, by which a running task is told to read more
lines as the user scrolls, is swapped out as tasks start and finish. It
was a plain field written from the task goroutines (when a task starts,
ends, or is replaced) and read from the UI thread in ReadLines/
ReadToEnd, so those accesses raced -- a longstanding data race (and a
plausible cause of the occasional "main view stops updating" hang, since
a torn read there could drop a scroll's read request).
Make the field an atomic.Pointer and give the running task a captured
local copy of the channel for its own send/receive, so the field itself
is only ever loaded/stored atomically. No lock is involved, so there's
nothing to untangle later.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When a task renders different content to a view (a new task key), the
view's scroll origin is reset to the top via onNewKey. That ran on the
task's own goroutine, racing the UI thread, which reads the origin
(OriginY) while laying out and drawing the view -- the single largest
source of view-render data races.
Give ViewBufferManager a bounce primitive (onUIThread) that runs a
function on the UI thread and waits for it, and reset the origin through
it. This is the first use of the primitive; subsequent commits route the
rest of the task's view mutations through it too, so that the view is
only ever touched on the UI thread. It runs as background work
(OnUIThreadAndWaitBackground) so rendering doesn't count towards the app
being busy, matching how the render's gocui task is already created.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The closures that render static content to a main view (newStringTask
and friends) ran on the ViewBufferManager's task goroutine, calling
SetViewContent/SetOrigin/ResetViewOrigin directly on the view. Those
touch view state (the line buffer, hover cells, the origin) that the UI
thread concurrently reads and mutates while laying out and drawing, so
they raced it -- e.g. a string task's SetContent clearing the view's
lines while the UI thread's CopyContent read them, or its SetOrigin
racing the layout's OriginY read.
Bounce the whole closure onto the UI thread instead, so the view is only
touched there. The bounce blocks (OnUIThreadAndWaitBackground) so the
task still completes only once the content has actually been rendered,
which the integration-test idle detection relies on; the background
variant keeps it from counting towards the app being busy, matching the
existing treatment of view rendering as work that must not block a repo
switch.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
We used to run some refreshes with a BLOCK_UI mode that causes it to run
on the main thread, blocking it. The two main reasons for doing this
were that in some cases we want the UI to update all at once, rather
then each panel when it's done refreshing (and in particular also render
a selection change in sync with the list update, e.g. when checking out
a branch, where the checked-out branch moves to the top and gets
selected there), and that we wanted to block keyboard input while the
refresh was running (so that people who like to work fast can "type
ahead"; e.g. press `e` to start an interactive rebase, and then `up` and
`d` to set the next rebase todo to dropped).
There were two problems with this: it blocked UI updates, so for
checking out a branch the status spinner would spin while the git
checkout command is running, but then freeze while the refresh was
running, which looked ugly; and also, for the "type ahead" scenario it
isn't enough to block events only while refresh runs, but we'd have to
block them during the entire operation.
This PR makes several improvements to this mechanism:
- it separates the two concerns: updating the UI all at once is a
separate RefreshOptions flag that can be set regardless of refresh mode,
and blocking keyboard input is a separate mechanism independent of
refresh. The two will often be used together, but don't have to.
- remove the special WithWaitingStatusSync mode that we used for cases
where "type ahead" support is especially important (mainly moving a
commit up/down): this used to work synchronously on the UI thread to
ensure that input is blocked, and used a special mechanism to still draw
the spinner. We don't need this any more now that we can block input
while doing the work on a background thread.
- get rid of the refresh mode (SYNC/ASYNC) altogether. We have had
separate Refresh/RefreshFromWorker calls for a while now (since #5767),
and the rule now is that all RefreshFromWorker calls are sync and all
Refresh calls are async.
Fetching pull requests can take a long time, and we don't want to delay
the refresh by it; in particular, for a WithWaitingStatusBlockingInput
we want the UI thread to be unblocked again while pull requests are
still fetching in the background. This is similar to how we fetch the
behind values for branches in BranchLoader; this will update the UI
without much flicker when done, and doesn't have to block anything.
The two branches of the `refresh` closure ran the scope function
identically; they differed only in that the UI-thread path registered
each scope as its own gocui task while the worker/demo path used a bare
goroutine (and only the latter logged per-scope timing).
Those per-scope tasks were redundant. performRefresh always runs under a
task that stays busy until the wg.Wait in waitAndFinalize joins every
scope goroutine: the calling worker's own task when called from a worker,
or the waitAndFinalize worker task when called from the UI thread — and
that task is created (busy) before the triggering event's task goes Done,
so there is no window in which nothing is busy. Repo-switch safety and the
integration-test idle signal are therefore already covered without giving
each scope its own task.
Collapsing to the single goroutine path also means the timing log now
fires for UI-thread refreshes too, not just worker ones.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Nothing calls it anymore now that the commit-surgery operations run on a
worker with input blocked. Remove the helper, its bespoke synchronous
spinner loop (renderAppStatusSync/setAppStatusContent), the popup-handler
plumbing, and the interface method.
That loop was also the only thing suppressing the yellow "Rebasing" mode
indicator (and its reset button) while lazygit drives a rebase itself.
Move that suppression to WithWaitingStatusBlockingInput so it applies to
every input-blocking commit-surgery op — including the ones that already
ran on a worker (edit, drop, and so on) and previously let the indicator
flash on mid-operation. It's cleared after the refresh, so an operation
that legitimately leaves a rebase in progress still shows the mode.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
With the last synchronous commit-surgery callers moved to workers,
nothing runs CheckMergeOrRebase on the UI thread anymore, so
CheckMergeOrRebaseWithRefreshOptionsFromUIThread has no callers. Remove
it and fold the shared checkMergeOrRebaseImpl back into
CheckMergeOrRebaseWithRefreshOptions, which is now always on a worker.
The runAction closure loses its calledFromWorker parameter for the same
reason.
genericMergeCommandImpl keeps its calledFromWorker flag: the
merge/rebase-continue subprocess path still runs on the UI thread when
invoked straight from the menu, and on a worker for the recursive
auto-skip.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
edit, quick-start rebase, drop, reword, squash, fixup, amend
(including the amend-attribute author operations) and
discard-file-from-commit all run a rebase on a worker. A key pressed
while one is in flight could act on a stale commit or todo — pressing e
to start an interactive rebase, then up+d before it finishes, is the
motivating example. Switch them from WithWaitingStatus to
WithWaitingStatusBlockingInput so input is held and replayed against the
post-operation state, matching the commit-surgery ops that were already
sync.
Left alone: the custom-patch move/delete/pull-into-commit rebases (no
need to block input while building and applying a patch), the
loading-more-commits and patch-building toggle spinners (no rebase to
disrupt), and fetches and other non-surgery operations where blocking
navigation would only get in the way.
Move, revert, squash-fixups, create-fixup and cherry-pick paste ran
their rebase synchronously on the UI thread via WithWaitingStatusSync,
which froze the UI for the duration but kept the user from disrupting the
operation with a stray keypress. Switch them to
WithWaitingStatusBlockingInput so the git work runs on a worker — the UI
keeps rendering and the spinner animates — while input stays blocked for
the whole operation, as before.
discard-patch-from-commit also moves off WithWaitingStatusSync, but as a
plain WithWaitingStatus: it's a custom-patch command, and those don't
block input.
The bodies now follow the worker conventions: model state they need is
captured on the UI thread before dispatching, self.c.Refresh becomes
RefreshFromWorker, and CheckMergeOrRebase uses the worker variant. An
operation that moves the selection does so in the refresh's Then, so it
lands in the same frame as the refreshed commit list; squash sets it as
an absolute index there, because the shorter list would clamp a relative
move.
It reads the selected index and the commits and branches models to
decide where to move the fixup commit. Take those as parameters,
captured on the UI thread by the callers, so the function can run its
rebase on a worker without reading the model there. No behavior change;
the callers still run on the UI thread for now.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bracket gocui's BeginBlockingEvents/EndBlockingEvents around a
worker operation that shows a waiting status. The block is begun
synchronously on the UI thread, before the operation is dispatched to a
worker, so no keypress can slip through in between; it ends via
OnUIThread once the operation and its refresh have applied their UI
updates, so the replayed keys act on the refreshed state.
This composes what the retiring WithWaitingStatusSync did — show a
status and block input — but on a worker, so the UI keeps rendering
(spinner animates, model updates land) instead of freezing. Callers
follow in subsequent commits.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Long-running operations that lazygit drives itself (rebases, and the
commit surgery built on them) can be corrupted by keys the user presses
while they run: pressing e to start an interactive rebase, then up+d
before it finishes, must act on the resulting todo list, not race the
rebase. WithWaitingStatusSync gets this today only as a side effect of
freezing the UI thread, which the rest of this branch is moving away
from.
Add a nestable counter, BeginBlockingEvents/EndBlockingEvents, that
withholds input at the event-dispatch layer without freezing anything:
while blocked, key events are buffered and replayed in order once the
count returns to zero (so they act on the now-current context), mouse
clicks and hover are dropped (replaying them against a changed layout
would target the wrong thing), and scrolling, resize, focus and all
rendering keep flowing. These are the reusable core; a gui-level helper
that brackets them around a worker operation follows.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
With sync vs async now derived from the calling thread, the Mode field
and its SYNC/ASYNC constants no longer carry any information: Refresh is
always async, RefreshFromWorker always sync. Drop the field, the type,
and the Mode argument at every call site, and reduce the debug log's
mode name to a plain sync/async derived from calledFromWorker.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Whether a refresh should block or run in the background was controlled
by the Mode field, but that always lined up with the calling thread: a
UI-thread Refresh must not block the UI, while a RefreshFromWorker runs
on a worker where blocking is exactly what we want. Now that Then and
BatchUIUpdates work regardless of that choice, drop Mode from the
decision and key it off calledFromWorker instead:
- Refresh (UI thread) runs its scopes and the finishing step (wait,
batch flush, Then) on workers, so the caller returns immediately —
what ASYNC used to mean.
- RefreshFromWorker runs them on the calling worker, blocking it until
everything is done — what SYNC used to mean.
Demos keep taking the blocking, inline path so everything still lands in
one deterministic frame.
In practice this flips the handful of RefreshFromWorker calls that
passed ASYNC — they now block their worker until the refresh finishes,
keeping the waiting-status spinner up until the UI actually updates —
and the many UI-thread refreshes that defaulted to SYNC, which no longer
freeze the UI thread while the git work runs. Mode now only feeds the
log line; the next commit removes it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Creating a branch checks it out, and checking out a distant ref (a tag
or a commit far from HEAD) can take a noticeable while. NewBranch ran
that synchronously in the prompt's confirm handler, on the UI thread, so
the UI froze — no spinner, no repaint — until it finished.
Move the branch creation (and the autostash path) onto a worker with a
waiting status, mirroring CheckoutRef, and refresh from the worker so
the UI thread stays live and the spinner keeps animating.
Push the branches context from the refresh's Then rather than up front:
the refresh already batches its UI updates, so switching panels there
lands the switch in the same frame as the refreshed branch list instead
of flashing the pre-refresh list while the checkout is still running.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Then, and BatchUIUpdates, previously only worked for a SYNC refresh: the
calling goroutine blocked in wg.Wait until every scope had finished, and
only then flushed the batch and ran Then. An ASYNC refresh had no such
join point — it dispatched each scope onto its own worker and returned
right away — so Then was forbidden (it would have run before the scopes
finished) and a batch would never be drained.
Give the async path a join of its own. Both paths now register their
scopes in the WaitGroup, and the finishing work — wg.Wait, the batch
flush, and Then — moves into a closure. A SYNC refresh runs it inline as
before; an ASYNC refresh dispatches it to a worker, so the caller still
returns immediately but the batch and Then run once every scope is done.
Besides lifting the restriction, this makes SYNC and ASYNC differ only
in whether the finishing work blocks the caller, which is what lets a
later commit drop the mode entirely and key the choice off the calling
thread instead.
There is no f() function any more, so a variable named "f runs on"
doesn't make sense. And we also don't need it any more; it used to be
necessary when its meaning was not exactly the same as
`!calledFromWorker`, but also included the BLOCK_UI case, but that has
changed several commits ago.
This was useful when there was a BLOCK_UI mode where f() was called
differently, but now we no longer need it. I'm making this change as a
separate commit because folding it into the previous one (which would
conceptually have made sense) would have made that diff unreadable
because of the indentation change.
The variable `fRunsOnUIThread` and its comment no longer make sense now;
we'll clean this up next.
The diff is best viewed with --ignore-all-space.
BLOCK_UI ran the whole refresh on the UI thread and parked it in a
wg.Wait for the duration, so the UI (and its spinner) froze while the
git work ran. Blocking the UI was never the point — the point was to
apply all the scopes' updates in one frame instead of a per-scope
cascade — and if we genuinely wanted to block input it should span the
whole operation, not just its refresh, which needs a gocui-level
mechanism we don't have.
So drop the mode and add a BatchUIUpdates option that achieves the
"one frame" effect without blocking: each scope's UI-thread bounce is
collected into a shared refreshBounceBatch during the refresh, and once
every scope has finished they're all applied inside a single OnUIThread
task. gocui drains every queued event before it redraws, so one task
means one repaint. The refresh itself now runs SYNC — on a worker when
issued from one (checkout, move-to-new-branch, the rebase-edit result
handling), so the UI thread stays live and the spinner keeps animating.
The batch needs a mutex because the scopes add concurrently from their
worker goroutines, and a closed flag so that any bounces enqueued after
the flush starts — the nested ones a flushed bounce produces in turn,
e.g. scrolling the selection into view — are dispatched immediately as
ordinary follow-ups rather than collected into a batch that nothing
will drain.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Agents (and humans new to the repo) repeatedly go looking for the gocui
sources in go.mod, go.sum, or the module cache and hit a dead end, because
gocui is a fork maintained in-tree under pkg/gocui rather than pulled in as
a dependency. Record that in AGENTS.md so the dead end is avoided.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Serialize concurrent writes to the streamed command's output writer.
`runAndStreamAux` funnels a command's stdout and stderr into a single
`cmdWriter` (the command-log panel, or a buffer when output is
suppressed) from two separate goroutines: stderr through the MultiWriter
set on `cmd.Stderr`, and stdout through the `onRun` callback. Those
goroutines
wrote the shared writer without any synchronization, racing on the
prefixWriter's `prefixWritten` flag and interleaving the two streams.
Wrap the writer so its writes are serialized.
runAndStreamAux reads the stdout buffer (and, when output is suppressed,
the combinedOutput buffer) for its error message after handler.wait()
returns, but the goroutine that fills those buffers by draining the
command's output isn't awaited, so the reads raced its final writes.
Own the goroutine here rather than letting the onRun callbacks spawn it,
and join it before reading the buffers. The pty reader reaches EOF on its
own once the process exits, but the non-pty pipe never does, so its
handler now closes the read end to unblock the reader; the pipe is
synchronous, so by the time the command has exited all of its output has
already been read and nothing is lost. This also plugs the goroutine that
the non-pty streaming path previously leaked on every command.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
runAndStreamAux funnels a command's stdout and stderr into a single
cmdWriter (the command-log panel, or a buffer when output is suppressed)
from two separate goroutines: stderr through the MultiWriter set on
cmd.Stderr, and stdout through the onRun callback. Those goroutines
wrote the shared writer without any synchronization, racing on the
prefixWriter's prefixWritten flag and interleaving the two streams.
Wrap the writer so its writes are serialized.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The transient contexts (remoteBranches, subCommits, commitFiles) take
over the window of the context they are drilled into from, but until
then they carry a hardcoded initial window ("branches" or
"commits"). Under a gui.sidePanels config where those tabs aren't
their panel's first, no window of that name exists, leaving the
window-to-view map with entries for windows the layout never
produces. The previous commit made such entries harmless, but there's
no reason to have contexts point at nonexistent windows in the first
place; assign them the window hosting branches or commits instead,
which the config validation guarantees to exist.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
With gui.sidePanels, a panel's gocui window is named after its first
tab, so when branches is grouped behind, say, worktrees, there is no
window called "branches" at all. The transient contexts
(remoteBranches, subCommits, commitFiles) initially point at the
windows "branches" and "commits", and layout() showed their views
whenever the window-to-view map named them as their window's current
view — without checking that the window exists in the layout. Since
the map is seeded from the contexts themselves, a window that no
panel owns keeps naming a transient view as its current view, and
that view had just been parked at full screen size (the fallback for
views in unlaid-out windows), so it covered every side panel below it
in z-order.
Only show a transient view if its window actually received dimensions
in this layout.
Fixes#5823.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
With gui.sidePanels, a panel's gocui window is named after its first
tab. The transient contexts (remoteBranches, subCommits, commitFiles)
initially point at the windows "branches" and "commits"; when the
config gives no panel that name, their views end up visible at full
screen size, covering every side panel below them in z-order (issue
#5823).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
tcell's filterEvents goroutine sends events into eventQ with a plain
blocking send, while Fini (via finish/finalize) closes eventQ after
closing the quit channel. The goroutine can have already committed to
the ev = <-inQ select arm when quit is closed, so its send into eventQ
races with the close; the race detector flags this (send and close on
the same channel are unsynchronized), and if the close wins, the send
panics with "send on closed channel".
This was caught by the integration tests under the race detector, where
every test drives a real tScreen over a MockTerm and tears it down via
Fini, but it equally affects real-terminal shutdown.
Upstream fixed it in 243630d2 ("Fix screen Init/Fini races") by tracking
the filter goroutine in a WaitGroup that finalize waits for before
closing eventQ, and guarding the send with a select on quit. That commit
is not in a tagged release yet (latest is v3.4.0), so pin the
pseudo-version; the delta over v3.4.0 is just this fix, a Windows
key-release fix, a cell-rendering perf tweak, and dependency bumps.
tcell's filterEvents goroutine sends events into eventQ with a plain
blocking send, while Fini (via finish/finalize) closes eventQ after
closing the quit channel. The goroutine can have already committed to
the ev = <-inQ select arm when quit is closed, so its send into eventQ
races with the close; the race detector flags this (send and close on
the same channel are unsynchronized), and if the close wins, the send
panics with "send on closed channel".
This was caught by the integration tests under the race detector,
where every test drives a real tScreen over a MockTerm and tears it
down via Fini, but it equally affects real-terminal shutdown.
Upstream fixed it in 243630d2 ("Fix screen Init/Fini races") by
tracking the filter goroutine in a WaitGroup that finalize waits for
before closing eventQ, and guarding the send with a select on quit.
That commit is not in a tagged release yet (latest is v3.4.0), so pin
the pseudo-version; the delta over v3.4.0 is just this fix, a Windows
key-release fix, a cell-rendering perf tweak, and dependency bumps.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
When the last conflict of a file is resolved, a files refresh both
offers to continue the rebase/merge (if we started it ourselves) and,
via its merge-conflicts scope, escapes from the merge conflicts view
back to the files context. The two race: the prompt is bounced onto the
UI thread by the files worker, while the escape's context push is queued
separately by EscapeMerge, and it deliberately refuses to push the files
context over a popup. So if the prompt opens first, the escape does
nothing, and closing the prompt lands the user in the stale merge
conflicts view — usually already emptied by the escape's state reset —
instead of the files panel. No later refresh rescues this.
Fix this by escaping from the merge conflicts view right before opening
the prompt. This runs on the UI thread and doesn't hold the merge
conflicts mutex, so it can reset the state and push the files context
synchronously; whichever side runs first, the prompt now always opens on
top of the files context, and EscapeMerge's guarded push still does
nothing only when that's the right thing to do.
This is a timing race with no deterministic regression test; it showed
up as a rare flake in tests that cancel the continue prompt (e.g.
commit/amend_when_there_are_conflicts_and_continue) when looping the
integration tests under the race detector.
When the last conflict of a file is resolved, a files refresh both
offers to continue the rebase/merge (if we started it ourselves) and,
via its merge-conflicts scope, escapes from the merge conflicts view
back to the files context. The two race: the prompt is bounced onto
the UI thread by the files worker, while the escape's context push is
queued separately by EscapeMerge, and it deliberately refuses to push
the files context over a popup. So if the prompt opens first, the
escape does nothing, and closing the prompt lands the user in the
stale merge conflicts view — usually already emptied by the escape's
state reset — instead of the files panel. No later refresh rescues
this.
Fix this by escaping from the merge conflicts view right before
opening the prompt. This runs on the UI thread and doesn't hold the
merge conflicts mutex, so it can reset the state and push the files
context synchronously; whichever side runs first, the prompt now
always opens on top of the files context, and EscapeMerge's guarded
push still does nothing only when that's the right thing to do.
This is a timing race with no deterministic regression test; it
showed up as a rare flake in tests that cancel the continue prompt
(e.g. commit/amend_when_there_are_conflicts_and_continue) when
looping the integration tests under the race detector.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Running the integration tests in a loop under the race detector
eventually hung in demo/bisect. The goroutine dump shows the cycle: a
background worker's task.Done() held the task manager's mutex while
blocking on the unbuffered idle-listener channel send, and the test
runner goroutine — the only reader of that channel — was itself blocked
in NewTask on that same mutex, on its way to enqueueing a caption render
(SetCaption -> Render -> OnUIThread). Neither side could proceed: the
notification couldn't be delivered until the test goroutine got the
mutex, and the mutex couldn't be released until the notification was
delivered.
The root problem is that the busy-to-idle notification is a blocking
rendezvous performed while holding the mutex, so it needs the waiter's
cooperation at a moment where the waiter may legitimately need the mutex
first.
Make the notification fire-and-forget instead: WaitUntilIdle waits on a
condition variable and re-checks "is any task busy?" under the mutex,
and the busy-to-idle transition broadcasts, which never blocks. Waiting
is now level-triggered rather than edge-triggered, which is also more
robust: a wait can no longer be satisfied by a stale idle transition
produced by an unrelated background task, because the predicate is
evaluated against the current state. This relies on the previous commit
having made replayed input events carry their task from submission;
without that, the wait could return in the window where an event is in
flight but not yet picked up by the main loop.
Running the integration tests in a loop under the race detector
eventually hung in demo/bisect. The goroutine dump shows the cycle: a
background worker's task.Done() held the task manager's mutex while
blocking on the unbuffered idle-listener channel send, and the test
runner goroutine — the only reader of that channel — was itself blocked
in NewTask on that same mutex, on its way to enqueueing a caption
render (SetCaption -> Render -> OnUIThread). Neither side could
proceed: the notification couldn't be delivered until the test
goroutine got the mutex, and the mutex couldn't be released until the
notification was delivered.
The root problem is that the busy-to-idle notification is a blocking
rendezvous performed while holding the mutex, so it needs the waiter's
cooperation at a moment where the waiter may legitimately need the
mutex first.
Make the notification fire-and-forget instead: WaitUntilIdle waits on a
condition variable and re-checks "is any task busy?" under the mutex,
and the busy-to-idle transition broadcasts, which never blocks. Waiting
is now level-triggered rather than edge-triggered, which is also more
robust: a wait can no longer be satisfied by a stale idle transition
produced by an unrelated background task, because the predicate is
evaluated against the current state. This relies on the previous commit
having made replayed input events carry their task from submission;
without that, the wait could return in the window where an event is in
flight but not yet picked up by the main loop.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Integration tests synchronize with lazygit through the task manager:
after submitting an input event, the test driver waits until the
program goes idle before asserting. But a submitted event only got its
task once the main loop picked it up from the events channel; while it
was still in flight (handed to the poller goroutine, or sitting in the
channel), no task existed for it, so the program could look idle even
though input was still pending.
The edge-triggered idle protocol mostly papers over this: each wait is
satisfied by the *next* busy-to-idle transition, which in practice is
the one produced by processing the submitted event. It only goes wrong
when some other task (e.g. a background refresh) completes in that
window, producing an edge the waiting test mistakes for its own — a
rare source of test flakes. The next commit replaces that protocol
with a level-triggered one, for which the window would be fatal rather
than rare: a wait falling into the gap would return immediately.
Close the gap by creating the task on the test goroutine before the
event is submitted, and carrying it through the poller into the main
loop, which uses it instead of creating its own. The new Replay*
methods own this invariant, and the replayed-events channels are no
longer exported, so tests can't submit an untracked event.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A following commit needs pollEvent to attach information from the
replayed-event wrappers to the GocuiEvent it returns. With the
conversion inlined there is no seam to do that in, because every branch
of the type switch returns directly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Resolve the pkg/gocui/gui.go conflict by keeping master's background-task
structure (Update/update(background), taskManager) and applying the
unbounded user-event queue on top — the same end state as if the fix had
been written on master directly.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This is useful for cutting a patch release for the previous version when
master already contains work that shouldn't be released yet.
Scheduled runs are unaffected: with no input provided, the ref is empty
and the checkout falls back to the default branch.
I keep getting slightly confused as to which is which, so make this
extra clear.
While at it, change the default to minor, this is the option that is
more often used now that we don't have regular scheduled releases any
more.
This is useful for cutting a patch release for the previous version
when master already contains work that shouldn't be released yet; for
example, v0.63.1 had to be tagged and released by hand from a v0.63.1
branch off the v0.63.0 tag because the workflow could only release
master.
Scheduled runs are unaffected: with no input provided, the ref is
empty and the checkout falls back to the default branch.
When creating a patch release from a branch called `v0.63.1`, the new
tag would get the same name and pushing it would fail with `error: src
refspec v0.63.1 matches more than one`.
The Get Latest Tag step used to pick the most recently created tag in
the entire repo, regardless of whether it is reachable from the commit
being released. In preparation for supporting releases from branches
other than master, use the nearest tag that is an ancestor of the
checked-out commit instead. This way, a patch release cut from an
older release branch bumps that branch's own latest tag even when
master already carries a newer release, and the "changes since last
release" check compares against the release that actually precedes
this one in history.
The Windows PTY support that was newly introduced in v0.63.0 had a
potential deadlock problem: when switching between longer diffs, lazygit
could lock up. This should hopefully be fixed with this PR.
winPty.Close could block indefinitely, and it is called while holding
the global PtyMutex and while the task's onDone sync.Once is
executing, so blocking there wedges the task's entire cleanup chain:
the next NewTask call blocks on <-notifyStopped while holding
waitingMutex, every later task for that view queues up behind it, and
onResize blocks on PtyMutex — a full UI freeze. (Reported by a user
via go-deadlock's 30s watchdog; a regression from the ConPTY support
introduced for v0.63.0.)
ClosePseudoConsole is what blocks; before Windows 11 24H2 it can do
so in two ways. It flushes the client's pending output into the out
pipe, but a stopped task's scanner goroutine has already quit
draining, so with a client that's still producing output the flush
never completes; this can also wedge the background waiter's
closeHpc, which runs with the pipes deliberately left open. And it
waits for the console host to exit, but closing only delivers
CTRL_CLOSE_EVENT to the attached client without terminating it, so a
client that keeps running (git still computing an expensive diff, a
pager waiting for input) keeps the host alive arbitrarily long.
Run the teardown on a background goroutine so Close returns
immediately no matter which of these strikes, and within it close our
pipe ends before the pseudoconsole, without taking p.mu: breaking the
pipes fails a pending flush fast, which also unblocks a waiter
already stuck in one.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
In #5756 we changed the userEvents channel to a fixed 256-slot channel
with a non-blocking send that panicked when the channel was full. It
turns out that this panic can happen in real use:
- Toggling a directory of several hundred files into a custom patch
(reliably): the operation runs on a worker behind a waiting status,
whose spinner enqueues a content-only render on every tick, and over the
long operation these outrun the UI loop and overflow the buffer.
- Editing the config in an editor that suspends lazygit: the editor
subprocess runs on the UI thread, so the loop drains nothing for the
whole editing session, and the full refresh fired on resume fans out
across every scope at once — a burst of updates that overflows before
the just-resumed loop catches up.
- Any time the UI thread blocks for a long time, the periodic refreshes
keep enqueuing and eventually overflow.
The 256-slot buffer was chosen deliberately, with the panic as a "should
never happen" guard, to preserve two properties: FIFO ordering of
same-goroutine Update calls (an earlier goroutine-per-Update design
reordered them), and no self-deadlock (a blocking send from the UI
thread would block against the loop that drains it). But a fixed channel
can only offer those by crashing on overflow.
Replace it with an unbounded, order-preserving queue: a mutex-guarded
slice plus a buffered(1) doorbell channel that wakes the main loop's
select. Enqueuing appends and rings the doorbell; the loop drains the
slice to empty on each wake. This keeps FIFO order and never blocks the
caller, so there is no self-deadlock and no overflow to panic on — under
a stall the queue just grows and then drains.
Fixes#5772.
Now that the queue is unbounded, its depth is a useful signal for
understanding how the event loop behaves under load — and we expect it
to look very different across builds (e.g. master, which carries the
bounce-state-updates-to-ui-thread work, versus the v0.63.0 release this
fix ships in). Track the deepest the queue has ever been and log an Info
line whenever that record is broken, so the numbers show up in the log
for later reasoning. The mark is session-wide and doesn't reset when the
queue drains.
gocui has no logger of its own, so it exposes the new depth through a
handler (matching the existing SetFocusHandler / SetOpenHyperlinkFunc
pattern) that the gui registers to log via its own logger.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Update and friends enqueued onto a fixed 256-slot channel with a
non-blocking send that panicked when the channel was full. That guard
was firing in real use:
- Toggling a directory of several hundred files into a custom patch
(reliably): the operation runs on a worker behind a waiting status,
whose spinner enqueues a content-only render on every tick, and over
the long operation these outrun the UI loop and overflow the buffer.
- Editing the config in an editor that suspends lazygit: the editor
subprocess runs on the UI thread, so the loop drains nothing for the
whole editing session, and the full refresh fired on resume fans out
across every scope at once — a burst of updates that overflows before
the just-resumed loop catches up.
- Any time the UI thread blocks for a long time, the periodic refreshes
keep enqueuing and eventually overflow.
The 256-slot buffer was chosen deliberately, with the panic as a
"should never happen" guard, to preserve two properties: FIFO ordering
of same-goroutine Update calls (an earlier goroutine-per-Update design
reordered them), and no self-deadlock (a blocking send from the UI
thread would block against the loop that drains it). But a fixed
channel can only offer those by crashing on overflow.
Replace it with an unbounded, order-preserving queue: a mutex-guarded
slice plus a buffered(1) doorbell channel that wakes the main loop's
select. Enqueuing appends and rings the doorbell; the loop drains the
slice to empty on each wake. This keeps FIFO order and never blocks the
caller, so there is no self-deadlock and no overflow to panic on — under
a stall the queue just grows and then drains.
This also removes an inconsistency: updateContentOnly did a plain
blocking send while update panicked, so the two paths disagreed on what
happened when the queue was full. Both now share the same enqueue.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
In v0.63.0 we made a change to no longer use `GIT_OPTIONAL_LOCKS=0` on
git commands that are part of a "foreground" refresh, meaning the
refresh after a lazygit command or the focus-in refresh. We do this on
purpose to keep git's mod date cache from becoming stale, which could
make lazygit become slower over time. However, this caused a problem for
users who work very fast: staging a file and then immediately pressing
shift-A to amend while the staging's refresh is still running would show
the dreaded index.lock error.
We already had a retry-on-index-lock-error mechanism in place, but it
wasn't used for commands like amend or commit; fix this so that the
retry loop works for these too, and also make the retry window a little
longer, and fix a problem where it wouldn't work in linked worktrees or
submodules.
Closes#5778.
The retry budget was five fixed 50ms waits (250ms total). A foreground
`git status` refresh can hold index.lock for longer than that on a large
repo, so the retries could be exhausted before the lock clears. Wait 20ms
before the first retry and double each time, giving seven attempts over a
bit more than a second — enough to outlast a slow refresh while keeping
the common case (a lock that clears almost immediately) fast. The initial
delay is now a runner field so tests can zero it out instead of sleeping.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The retry check matched the literal ".git/index.lock", which only ever
appears for the main worktree. A linked worktree's lock is at
.git/worktrees/<name>/index.lock and a submodule's is under its own git
dir, so contention there was never retried. Match the bare "index.lock"
fragment instead, which covers all of them.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Have isRetryableError also inspect the returned error, not just the
captured output. Streamed commands (amend, commit, and other operations
run through the gpg helper) don't capture output, so their index.lock
failures were slipping past the retry loop and surfacing to the user as
a hard "Git command failed". Now they retry like every other command.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The gpg helper runs commands like amend with StreamOutput, so their
output isn't captured and a failed run returns an empty output string;
the index.lock message is carried by the error instead. isRetryableError
only inspects the output, so the retry loop never fires for these
commands. In practice this means a `shift-A` amend issued while a
foreground `git status` refresh briefly holds index.lock fails outright
instead of retrying.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
RunWithOutput and RunWithOutputs each carried their own near-identical
copy of the index.lock retry loop. Extract the loop into a single
retryOnLockError helper so the retry policy lives in one place, ahead of
changing that policy. Behavior is unchanged; the added tests characterize
it (success and non-lock errors run once, a lock error in the output is
retried).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
startBackgroundFetch assigned the field from its own goroutine, and
only after the initial fetch had completed, while the UI thread reads
it in triggerImmediateFetch on every repo switch, with no
synchronization.
Create the channel in startBackgroundRoutines instead, which runs on
the UI thread before the fetch goroutine is spawned; everything the UI
thread does afterwards is ordered after the write, so the read is
race-free without any locking. To make this possible, goEvery now
takes the retrigger channel as a parameter instead of creating and
returning it; callers that have no use for a retrigger channel pass
nil, and a nil channel in a select is simply never ready.
As a side effect, a repo switch that happens before the fetch loop has
started (during the intro popup or the initial fetch) now latches a
trigger and causes an immediate fetch once the loop is running, where
previously it was silently dropped.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Switching repos triggers an immediate background fetch by sending on
the goEvery retrigger channel. The send was blocking, but the goEvery
loop only receives between callbacks: while a fetch is in flight, it
waits for that fetch to finish before returning to its select. So a
repo switch that landed while a fetch was in flight would stall the UI
thread for the remainder of the fetch.
Worse, since worker refreshes capture state on the UI thread with a
blocking OnUIThreadAndWaitBackground call, the in-flight fetch's
post-fetch refresh can itself be waiting for the UI thread, turning
that stall into a deadlock cycle:
UI thread: switchTo -> triggerImmediateFetch, blocking send
goEvery loop: waiting for the in-flight fetch to finish
fetch worker: PostFetchRefresh -> RefreshFromWorker, waiting for
the UI thread
Make the send non-blocking, and give the channel a buffer of one so
that a trigger arriving while a fetch is in flight is latched rather
than dropped; that fetch is fetching the previous repo, so we still
need another one after it. The goEvery loop picks the trigger up as
soon as it returns to its select, and concurrent triggers coalesce.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-10 16:48:42 +02:00
786 changed files with 53008 additions and 13649 deletions
In todays world of agentic coding I have decided that it no longer makes sense for me to look at incoming pull requests. As far as I can tell, the vast majority of these is AI-generated these days, which in itself is not necessarily a bad thing; however, there's no way for me to tell whether the person posting the PR actually understands anything about the code that is being contributed or not, and I don't feel like spending time and energy on finding out whether they do.
This project does not accept pull requests. Don't bother making one, it won't be merged.
Now you might ask why this even matters; coding agents are capable of producing amazingly high-quality code, so why is it important that the person opening the PR understands it, as long as the code works and tests are green? It does actually matter very much to me. AI generated code needs to be carefully reviewed and iterated on, and it is the contributor's job to do that, not mine. And I have no idea to what extent the contributor has done this, or whether they are even capable of it.
However, there are other forms of contributions that are very welcome and encouraged; see below for what those are.
Every PR needs work and iterations until it is mergeable, whether manually coded or AI generated (even very good ones do), and if I don't know whether the person posting the PR will act on my review feedback themselves or just pass it on to their coding agent (which I guess is the much more likely case today), then it doesn't make sense for me to work with them.
## Why no PRs?
For this reason I will close incoming pull requests by default from now on, without comment. Sorry if this sounds hostile, but honestly I don't feel I have much of a choice if I want maintaining this project to still be enjoyable for me.
There are two main reasons for this, and I want to be very honest about them:
With that said, if you are indeed serious about contributing a high-quality PR to lazygit, and you are familiar with go, and you have learned enough about lazygit's code base to tell whether your changes are good, then do raise an issue and explain what you are planning to do, and somehow make it plausible that your PR will be worth my time reviewing it. In such a case I might make an exception from the default rule.
- I am maintaining lazygit for fun, as a hobby in my free time (which is quite limited). I'd like to spend my free time on things that I enjoy doing. I enjoy working on lazygit's code and improving it myself; I don't enjoy reviewing PRs. It's that simple, really. Reviewing PRs takes a lot of time; time that I would rather spend on developing lazygit myself.
- Even if I had the time and inclination to review PRs, this has become quite difficult today: most PRs nowadays are AI-generated to some extent (often completely), which in itself is not necessarily a bad thing; I heavily use AI myself these days, and I get great results from it. However, agentic coding needs to be guided by humans so that the results are good, and for contributed PRs I can't tell to what extent the human contributor did this, or is even capable of it; and I don't want to do the work of guiding a contributor's coding agent. If I post PR review feedback and have to suspect that the contributor simply passes it on to their coding agent, then that is a work mode that doesn't make sense to me, and I would rather just drive my own agent to do the work.
In the future I might also consider adopting a vouch system similar to [Ghostty's](https://github.com/ghostty-org/ghostty/blob/main/CONTRIBUTING.md#first-time-contributors), but right now I feel the effort needed to set this up and maintain is not justified given the rather low number of high-quality contributions I have seen in recent times.
### Why it might still make sense to post a PR
Even though we no longer accept pull requests, I find it important to emphasize that Lazygit is still a community project, and non-PR contributions are still very welcome. Do file issues for bug reports or feature requests, and help shape the future of lazygit by actively participating in discussing UX designs. Also, the localization system very much depends on everybody's help with translating texts (see https://crowdin.com/project/lazygit).
I can think of two such reasons:
---
- You implemented a lazygit improvement that you want to use yourself; in this case it could make sense to let others merge this change into their forks if they find it useful too. And if enough people say they want the feature, this can persuade me to add it, so putting it out there to give it visibility can be helpful.
- You posted an issue for a feature request, and have a prototype that implements it; it could be useful to publish the branch as a draft PR to better illustrate how the feature works.
The remainder of this document is the old version from a time when contributing pull requests was still encouraged. Keeping it here in case I reconsider my policy in the future.
For this reason I usually don't close pull requests to give them more visibility. Just don't expect your PR to be merged.
## PR walkthrough
## So how can I contribute then?
[This video](https://www.youtube.com/watch?v=kNavnhzZHtk) walks through the process of adding a small feature to lazygit. If you have no idea where to start, watching that video is a good first step.
There are other forms of contributions to a project besides source code that are very welcome and encouraged; for instance:
## Design principles
- File issues for bugs that you find, and I'll do my best to take care of fixing them (if they are important enough).
- File feature requests for new functionality that you want to see in lazygit. I have a lot of ideas for future improvement myself, but I have also implemented a lot of feature ideas that weren't mine, and I'm grateful for those ideas. (Of course, there are also lots of feature requests that I don't implement, so don't be disappointed if I don't jump on yours.)
- Help make other people's bug reports reproducible. Sometimes people report bugs that they have only seen once, and in such a case it can be helpful to come up with reproducible scenarios.
- Help complete or improve the translation into other languages; join https://crowdin.com/project/lazygit for that.
- Run a master build! This is probably the most valuable way to help me. Test the latest master not just by occasionally trying it, but by actually using it for your daily work; report any issues that you find. This will help prevent having to release hotfix updates for regressions that are only noticed by users updating to a new release.
See [here](./VISION.md) for a set of design principles that we want to consider when building a feature or making a change.
- what the different packages in the codebase are for
- where important files live
- important concepts in the code
- how the event loop works
- other useful information
## All code changes happen through Pull Requests
Pull requests are the best way to propose changes to the codebase. We actively
welcome your pull requests:
1. Fork the repo and create your branch from `master`.
2. If you've added code that should be tested, add tests.
3. If you've added code that needs documentation, update the documentation.
4. Write a [good commit message](http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html).
5. Issue that pull request!
Please do not raise pull request from your fork's master branch: make a feature branch instead. Lazygit maintainers will sometimes push changes to your branch when reviewing a PR and we often can't do this if you use your master branch.
If you've never written Go in your life, then join the club! Lazygit was the maintainer's first Go program, and most contributors have never used Go before. Go is widely considered an easy-to-learn language, so if you're looking for an open source project to gain dev experience, you've come to the right place.
## Commit history
We value a clean and useful commit history, so please take some time to organize your commits so that they make sense. Don't assume that they will be squashed on merge anyway; we don't do that here.
In particular:
- Refactorings and behavior changes should be in separate commits. There are very few exceptions where this is not possible, but in my experience they are very rare.
- Strive for minimal commits; every change that is independent from other changes should be in a commit of its own (with a good commit message that explains why the change is made).
- When you need to iterate over your implementation during review (e.g. because you discovered a bug, or a maintainer requested changes), don't just pile new commits on top. Use fixup commits to make your changes transparent while still maintaining a good commit history. If you don't know what that means, [here's a brief introduction](docs/Fixup_Commits.md).
## A note about AI
It has become common recently to throw an issue at a coding agent and submit whatever comes out of it as a PR. This is not appreciated here, and I will close PRs where I can tell this was the case, or where I even suspect it was the case.
Some of these PRs may actually be good and useful, but many are not, and it's not a good use of my time as a maintainer to look at generated PRs to decide. This is the job of the PR's contributor, and if you don't speak enough go or can't be bothered to get familiar enough with lazygit's codebase to tell, then don't contribute the PR.
## Running in a VSCode dev container
If you want to spare yourself the hassle of setting up your dev environment yourself (i.e. installing Go, extensions, and extra tools), you can run the Lazygit code in a VSCode dev container like so:
- you have the dev containers extension installed in VSCode
See [here](https://code.visualstudio.com/docs/devcontainers/containers) for more info about dev containers.
## Running in a Github Codespace
If you want to start contributing to Lazygit with the click of a button, you can open the lazygit codebase in a Codespace. First fork the repo, then click to create a codespace:
To run lazygit from within the integrated terminal just go `go run main.go`
This allows you to contribute to Lazygit without needing to install anything on your local machine. The Codespace has all the necessary tools and extensions pre-installed.
## Using Nix for development
If you use Nix, you can leverage the included flake to set up a complete development environment with all necessary dependencies:
```sh
nix develop
```
This will drop you into a development shell that includes:
- Latest Go toolchain
- golangci-lint for code linting
- git and make
You can also build and run lazygit using nix:
```sh
# Build lazygit
nix build
# Run lazygit directly
nix run
```
The nix flake supports multiple architectures (x86_64-linux, aarch64-linux, x86_64-darwin, aarch64-darwin) and provides a consistent development environment across different systems.
## Code of conduct
Please note by participating in this project, you agree to abide by the [code of conduct].
[code of conduct]: https://github.com/jesseduffield/lazygit/blob/master/CODE-OF-CONDUCT.md
## Any contributions you make will be under the MIT Software License
In short, when you submit code changes, your submissions are understood to be
under the same [MIT License](http://choosealicense.com/licenses/mit/) that
covers the project. Feel free to contact the maintainers if that's a concern.
## Report bugs using Github's [issues](https://github.com/jesseduffield/lazygit/issues)
We use GitHub issues to track public bugs. Report a bug by [opening a new
issue](https://github.com/jesseduffield/lazygit/issues/new); it's that easy!
## Go
This project is written in Go. Go is an opinionated language with strict idioms, but some of those idioms are a little extreme. Some things we do differently:
1. There is no shame in using `self` as a receiver name in a struct method. In fact we encourage it
2. There is no shame in prefixing an interface with 'I' instead of suffixing with 'er' when there are several methods on the interface.
3. If a struct implements an interface, we make it explicit with something like:
```go
var_MyInterface=&MyStruct{}
```
This makes the intent clearer and means that if we fail to satisfy the interface we'll get an error in the file that needs fixing.
### Code Formatting
To check code formatting [gofumpt](https://pkg.go.dev/mvdan.cc/gofumpt#section-readme) (which is a bit stricter than [gofmt](https://pkg.go.dev/cmd/gofmt)) is used.
VSCode will format the code correctly if you tell the Go extension to use `gofumpt` via your [`settings.json`](https://code.visualstudio.com/docs/getstarted/settings#_settingsjson)
by setting [`formatting.gofumpt`](https://github.com/golang/tools/blob/master/gopls/doc/settings.md#gofumpt-bool) to `true`:
```jsonc
// .vscode/settings.json
{
"gopls":{
"formatting.gofumpt":true
}
}
```
To run gofumpt from your terminal go:
```
go install mvdan.cc/gofumpt@latest && gofumpt -l -w .
```
## Programming Font
Lazygit supports [Nerd Fonts](https://www.nerdfonts.com) to render certain icons. Sometimes we use some of these icons verbatim in string literals in the code (mainly in tests), so you need to set your development environment to use a nerd font to see these.
## Internationalisation
Boy that's a hard word to spell. Anyway, lazygit is translated into several languages within the pkg/i18n package.
### For developers adding new text
If you need to render text to the user, you should add a new field to the TranslationSet struct in `pkg/i18n/english.go` and add the actual content within the `EnglishTranslationSet()` method in the same file. Then you can access via `gui.Tr.YourNewText` (or `self.c.Tr.YourNewText`, etc).
Note, we use 'Sentence case' for everything (so no 'Title Case' or 'whatever-it's-called-when-there's-no-capital-letters-case')
### For translators
Lazygit translations are managed through [Crowdin](https://crowdin.com/project/lazygit/). If you'd like to contribute translations:
1. Join the Crowdin project at https://crowdin.com/project/lazygit/
2. Select your target language and help translate missing strings
3. The translation files in `pkg/i18n/translations/` are managed by the maintainers - please don't edit them directly
For detailed information about the translation process, including how maintainers sync translations, see `pkg/i18n/translations/README.md`.
## Debugging
The easiest way to debug lazygit is to have two terminal tabs open at once: one for running lazygit (via `go run main.go -debug` in the project root) and one for viewing lazygit's logs (which can be done via `go run main.go --logs` or just `lazygit --logs`).
From most places in the codebase you have access to a logger e.g. `gui.Log.Warn("blah")` or `self.c.Log.Warn("blah")`.
If you find that the existing logs are too noisy, you can set the log level with e.g. `LOG_LEVEL=warn go run main.go -debug` and then only use `Warn` logs yourself.
If you need to log from code in the vendor directory (e.g. the `gocui` package), you won't have access to the logger, but you can easily add logging support by setting the `LAZYGIT_LOG_PATH` environment variable and using `logs.Global.Warn("blah")`. This is a global logger that's only intended for development purposes.
If you keep having to do some setup steps to reproduce an issue, read the Testing section below to see how to create an integration test by recording a lazygit session. It's pretty easy!
### VSCode debugger
If you want to trigger a debug session from VSCode, you can use the following snippet. Note that the `console` key is, at the time of writing, still an experimental feature.
```jsonc
// .vscode/launch.json
{
"version":"0.2.0",
"configurations":[
{
"name":"debug lazygit",
"type":"go",
"request":"launch",
"mode":"auto",
"program":"main.go",
"args":["--debug"],
"console":"externalTerminal"// <-- you need this to actually see the lazygit UI in a window while debugging
}
]
}
```
## Profiling
If you want to investigate what's contributing to CPU or memory usage, see [this separate document](docs/dev/Profiling.md).
## Testing
Lazygit has two kinds of tests: unit tests and integration tests. Unit tests go in files that end in `_test.go`, and are written in Go. For integration tests, see [here](https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md)
## Updating Gocui
Sometimes you will need to make a change in the gocui fork (https://github.com/jesseduffield/gocui). Gocui is the package responsible for rendering windows and handling user input. Here's the typical process to follow:
1. Make the changes in gocui inside lazygit's vendor directory so it's easy to test against lazygit
2. Copy the changes over to the actual gocui repo (clone it if you haven't already, and use the `awesome` branch, not `master`)
3. Raise a PR on the gocui repo with your changes
4. After that PR is merged, make a PR in lazygit bumping the gocui version. You can bump the version by running the following at the lazygit repo root:
```sh
./scripts/bump_gocui.sh
```
5. Raise a PR in lazygit with those changes
## Updating Lazycore
[Lazycore](https://github.com/jesseduffield/lazycore) is a repo containing shared functionality between lazygit and lazydocker. Sometimes you will need to make a change to that repo and import the changes into lazygit. Similar to updating Gocui, here's what you do:
1. Make the changes in lazycore inside lazygit's vendor directory so it's easy to test against lazygit
2. Copy the changes over to the actual lazycore repo (clone it if you haven't already, and use the `master` branch)
3. Raise a PR on the lazycore repo with your changes
4. After that PR is merged, make a PR in lazygit bumping the lazycore version. You can bump the version by running the following at the lazygit repo root:
```sh
./scripts/bump_lazycore.sh
```
Or if you're using VSCode, there is a bump lazycore task you can find by going `cmd+shift+p` and typing 'Run task'
5. Raise a PR in lazygit with those changes
## Improvements
If you can think of any way to improve these docs let us know.
Importantly, if you file issues (whether bug reports or feature requests), stay around to answer questions and discuss your issue. There are few things that I find more annoying than spending time on responding to someone's issue (sometimes even making a PR that addresses it), and to then never hear from the OP again. So please set up your Github notifications so that you see when there's activity on your issue, and continue to participate.
# 'pager', 'externalDiffCommand', and 'useExternalDiffGitConfig' are mutually
# exclusive; set at most one per entry.
#
# See https://github.com/jesseduffield/lazygit/blob/master/docs/Custom_Pagers.md
# See https://github.com/jesseduffield/lazygit/blob/master/docs/Custom_DiffRenderers.md
# for more information.
pagers:[]
diffRenderers:[]
# Config relating to committing
commit:
@@ -444,7 +469,9 @@ git:
# If not "none", lazygit will automatically fast-forward local branches to match
# their upstream after fetching. Applies to branches that are not the currently
# checked out branch, and only to those that are strictly behind their upstream
# (as opposed to diverged).
# (as opposed to diverged). A branch that is checked out in another worktree is
# fast-forwarded there, unless that worktree has changes to tracked files or is
# in the middle of a rebase or bisect.
# Possible values: 'none' | 'onlyMainBranches' | 'allBranches'
autoForwardBranches:onlyMainBranches
@@ -716,8 +743,8 @@ keybinding:
prevTab:'['
nextScreenMode:+
prevScreenMode:_
cyclePagers:'|'
cyclePagersReverse:\
cycleDiffRenderers:'|'
cycleDiffRenderersReverse:\
undo:z
redo:Z
filteringMenu:<ctrl+s>
@@ -727,7 +754,6 @@ keybinding:
submitEditorText:<enter>
extrasMenu:'@'
toggleWhitespaceInDiffView:<ctrl+w>
toggleMouseCapture:'%'
increaseContextInDiffView:'}'
decreaseContextInDiffView:'{'
increaseRenameSimilarityThreshold:)
@@ -819,6 +845,8 @@ keybinding:
main:
prevHunk:[<left>, h]
nextHunk:[<right>, l]
prevFile:"N"
nextFile:"n"
toggleSelectHunk:a
pickBothHunks:b
editSelectHunk:E
@@ -1001,6 +1029,7 @@ The available attributes are:
- bold
- default
- dim # faint text; not supported by every terminal
- reverse # useful for high-contrast
- underline
- strikethrough
@@ -1025,28 +1054,61 @@ gui:
- reverse
```
The text of the selected line is bold by default. If you don't want that, set `selectedLineFgColor` to `default`:
```yaml
gui:
theme:
selectedLineFgColor:
- default
```
## Themes for dark and light backgrounds
The colors in `gui.theme` apply whether your terminal has a dark or a light background. If you want different colors for the two, set them in `gui.darkTheme` or `gui.lightTheme`. These have the same fields as `gui.theme`, and a field that you set in them overrides the one in `gui.theme`:
```yaml
gui:
theme:
activeBorderColor:
- green
- bold
lightTheme:
activeBorderColor:
- blue
- bold
```
For `authorColors` and `branchColorPatterns`, each entry overrides the one with the same key in `gui.theme`, and the other entries of `gui.theme` still apply. Branch color patterns of `gui.darkTheme` or `gui.lightTheme` come before those of `gui.theme`.
Lazygit asks the terminal whether its background is dark or light. If your terminal doesn't tell, lazygit assumes a dark background; set `gui.colorScheme` to `light` if yours is light.
## Custom Author Color
Lazygit will assign a random color for every commit author in the commits pane by default.
These colors are picked to be readable against the background of your terminal, and lazygit asks the terminal whether its background is dark or light. If your terminal doesn't tell, lazygit assumes a dark background; set `gui.colorScheme` to `light` if yours is light.
You can customize the color in case you're not happy with the randomly assigned one:
```yaml
gui:
authorColors:
'John Smith':'red'# use red for John Smith
'Alan Smithee':'#00ff00'# use green for Alan Smithee
theme:
authorColors:
'John Smith':'red'# use red for John Smith
'Alan Smithee':'#00ff00'# use green for Alan Smithee
```
You can use wildcard to set a unified color in case your are lazy to customize the color for every author or you just want a single color for all/other authors:
```yaml
gui:
authorColors:
# use red for John Smith
'John Smith':'red'
# use blue for other authors
'*':'#0000ff'
theme:
authorColors:
# use red for John Smith
'John Smith':'red'
# use blue for other authors
'*':'#0000ff'
```
## Custom Branch Color
@@ -1055,13 +1117,16 @@ You can customize the color of branches based on branch patterns (regular expres
```yaml
gui:
branchColorPatterns:
'^docs/':'#11aaff'# use a light blue for branches beginning with 'docs/'
'ISSUE-\d+':'#ff5733'# use a bright orange for branches containing 'ISSUE-<some-number>'
theme:
branchColorPatterns:
'^docs/':'#11aaff'# use a light blue for branches beginning with 'docs/'
'ISSUE-\d+':'#ff5733'# use a bright orange for branches containing 'ISSUE-<some-number>'
```
Note that the regular expressions are not implicitly anchored to the beginning/end of the branch name. If you want to do that, add leading `^` and/or trailing `$` as needed.
If several patterns match a branch, the first one wins.
## Custom Files Icon & Color
You can customize the icon and color of files based on filenames or extensions:
Custom diff renderers are useful for showing a better rendering of a diff than git's builtin raw diff, and using one is strongly recommended (I personally prefer delta myself, but that's a matter of personal preference). There are three types of diff renderers that lazygit supports:
- **stdin filters**, e.g. [delta](#delta) and [diff-so-fancy](#diff-so-fancy). They take git's raw output as stdin and produce something nicer on stdout, and they are hooked up using git's GIT_PAGER mechanism. (These used to be called "custom pagers" in earlier lazygit versions.)
- **external diff programs**, e.g. difftastic; these are called using git's `--ext-diff` flag, and they take over diff generation from git completely rather than post-processing git's output.
- **git's raw output using custom arguments**; mainly useful for `--color-words` (or `--word-diff` if you are color blind).
Diff renderers are configured with the `diffRenderers` array in the `git` section of lazygit's config file; it is an array because you can have multiple entries that you can cycle through with the `|` key. This can be useful if you usually prefer a particular diff renderer, but want to use a different one for certain kinds of diffs.
Fields that are shared by all renderer types:
- **type** The type of diff renderer; choices are `stdinFilter`, `extDiff`, or `rawGit`. `stdinFilter` is the default, because it's the most common one; so you can omit this if you use delta.
- **name** A name that is shown in the status bar toast when cycling renderers; defaults to the first word of the renderer command, but can be useful e.g. to distinguish "delta" from "delta side-by-side" if you have entries for both.
Fields only for `stdinFilter`:
- **command** The command line to use for `GIT_PAGER`.
- **colorArg** whether you want the `--color=always` arg in your `git diff` command. Some diff renderers want it set to `always`, others want it set to `never`. The default is `always`, since that's what most renderers need.
Fields only for `extDiff`:
- **command** The command line to use for the `diff.external` git config. If left empty, it uses the global value of git's `diff.external` config; this can be useful if you also want to use it for diffs on the command line, and it also has the advantage that you can configure it per file type in `.gitattributes`; see https://git-scm.com/docs/gitattributes#_defining_an_external_diff_driver.
Fields only for `rawGit`:
- **args** The additional arguments to use in the `git diff` or `git show` call (e.g. `--color-words`), as an array of strings.
The `command` of a `stdinFilter` or `extDiff` renderer is a [Go template](https://pkg.go.dev/text/template) with these variables:
-`{{width}}`: the width of the view that the diff is rendered into.
-`{{colorScheme}}`: `dark` or `light`, depending on whether the terminal has a dark or a light background. Lazygit asks the terminal about this; if yours doesn't tell, set `gui.colorScheme`.
-`{{columnWidth}}` (only for `stdinFilter`): the width of one side of a side-by-side rendering, e.g. for `ydiff -p cat -s -w {{columnWidth}}`.
-`{{diffContext}}` (only for `extDiff`): lazygit's current diff context size, the value controlled by the `{`/`}` keybindings.
A variable can also be written with a leading dot, as in `{{.width}}`. The command can use template expressions too; for example, `delta --paging=never {{if gt .width 160}}--side-by-side{{end}}` shows the diff side by side only when there is room for it, or `delta --syntax-theme={{if eq .colorScheme "light"}}Github{{else}}Dracula{{end}}` picks a different syntax theme based on the background.
`--{{colorScheme}}` passes `--dark` or `--light` to delta, so that it matches the background of your terminal.
A cool feature of delta is --hyperlinks, which renders clickable links for the line numbers in the left margin, and lazygit supports these. To use them, set the `command:` field to `delta --{{colorScheme}} --paging=never --line-numbers --hyperlinks --hyperlinks-file-link-format="lazygit-edit://{path}:{line}"`; this allows you to click on an underlined line number in the diff to jump right to that same line in your editor.
Note that delta's `--navigate` option doesn't work in lazygit, for technical reasons.
## Diff-so-fancy
```yaml
git:
diffRenderers:
- command:diff-so-fancy
```
## ydiff
```yaml
gui:
sidePanelWidth:0.2# gives you more space to show things side-by-side
Lazygit supports custom pagers, [configured](/docs/Config.md) in the config.yml file (which can be opened by pressing `e` in the Status panel).
Multiple pagers are supported; you can cycle through them with the `|` key. This can be useful if you usually prefer a particular pager, but want to use a different one for certain kinds of diffs.
Pagers are configured with the `pagers` array in the git section; here's an example for a multi-pager setup (use an empty object `{}` for the default builtin diff display that doesn't use a pager):
The `colorArg` key is for whether you want the `--color=always` arg in your `git diff` command. Some pagers want it set to `always`, others want it set to `never`. The default is `always`, since that's what most pagers need.
## Delta:
```yaml
git:
pagers:
- pager:delta --dark --paging=never
```
A cool feature of delta is --hyperlinks, which renders clickable links for the line numbers in the left margin, and lazygit supports these. To use them, set the `pager:` config to `delta --dark --paging=never --line-numbers --hyperlinks --hyperlinks-file-link-format="lazygit-edit://{path}:{line}"`; this allows you to click on an underlined line number in the diff to jump right to that same line in your editor.
Note that delta's `--navigate` option doesn't work in lazygit, for technical reasons.
## Diff-so-fancy
```yaml
git:
pagers:
- pager:diff-so-fancy
```
## ydiff
```yaml
gui:
sidePanelWidth:0.2# gives you more space to show things side-by-side
Be careful with this one, I think the homebrew and pip versions are behind master. I needed to directly download the ydiff script to get the no-pager functionality working.
## Using external diff commands
Some diff tools can't work as a simple pager like the ones above do, because they need access to the entire diff, so just post-processing git's diff is not enough for them. The most notable example is probably [difftastic](https://difftastic.wilfred.me.uk).
These can be used in lazygit by using the `externalDiffCommand` config; in the case of difftastic, that could be
```yaml
git:
pagers:
- externalDiffCommand:difft --color=always
```
The `colorArg` option is not used in this case.
You can add whatever extra arguments you prefer for your difftool; for instance
This can also be used for normal git diffs with custom parameters, such as `--color-words` or `--word-diff` which some people find useful. To do that, save a script like this to, say, `~/bin/color-words.sh`:
Instead of setting this command in lazygit's `externalDiffCommand` config, you can also tell lazygit to use the external diff command that is configured in git itself (`diff.external`), by using
```yaml
git:
pagers:
- useExternalDiffGitConfig:true
```
This can be useful if you also want to use it for diffs on the command line, and it also has the advantage that you can configure it per file type in `.gitattributes`; see https://git-scm.com/docs/gitattributes#_defining_an_external_diff_driver.
`pager`, `externalDiffCommand`, and `useExternalDiffGitConfig` are alternative ways of producing the diff, so a pager entry may use at most one of them.
Depending on the currently focused view, hitting '/' will bring up a filter or search prompt. When filtering, the contents of the view will be filtered down to only those lines which match the query string. When searching, the contents of the view are not filtered, but matching lines are highlighted and you can iterate through matches with `n`/`N`.
We intend to support filtering for the files view soon, but at the moment it uses searching. We intend to continue using search for the commits view because you typically care about the commits that come before/after a matching commit.
In the commits view we don't filter, but search; this is deliberate because you typically care about the commits that come before/after a matching commit.
If you would like both filtering and searching to be enabled on a given view, please raise an issue for this.
## Menu filtering
The keybindings (`?`) and recent repositories menus can be filtered simply by typing. The filter field appears at the bottom of the menu while you type; there is no need to press `/` or confirm the filter before navigating the results.
## Filtering files by status
You can filter the files view to only show staged/unstaged files by pressing `<c-b>` in the files view.
@@ -10,8 +10,8 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Scroll up main window | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Scroll down main window | |
| `` @ `` | View command log options | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Push | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | Pull | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` P `` | Push | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. If other branches are stacked below the current one and have commits to push, you are offered to push those too. |
| `` p `` | Pull | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. If other branches are stacked below the current one and have changed on the remote, you are offered to update those too. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
@@ -22,8 +22,8 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` R `` | Refresh | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Cancel | |
| `` ? `` | Open keybindings menu | |
| `` <ctrl+s> `` | View filter options | View options for filtering the commit log, so that only commits matching the filter are shown. |
@@ -31,7 +31,6 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` q, <ctrl+c> `` | Quit | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` <alt+shift+c> `` | Edit config file | Open file in external editor. |
| `` z `` | Undo | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
@@ -190,7 +189,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` d `` | Delete | View delete options for local/remote branch. |
| `` r `` | Rebase | Rebase the checked-out branch onto the selected branch. |
| `` M `` | Merge | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` f `` | Fast-forward | Fast-forward selected branch from its upstream. |
| `` f `` | Fast-forward | Fast-forward selected branch from its upstream. If the branch has diverged from its upstream because the upstream branch was rewritten, and it has no commits of its own, it is reset to its upstream instead. This needs reflogs to be enabled; a bare repository doesn't keep them by default (core.logAllRefUpdates). |
| `` T `` | New tag | |
| `` s `` | Sort order | |
| `` g `` | Reset | |
@@ -224,7 +223,22 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` d `` | Discard | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` E `` | Edit hunk | Edit selected hunk in external editor. |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` <left>, h `` | Go to previous hunk | |
| `` <right>, l `` | Go to next hunk | |
| `` N `` | Go to previous file | |
| `` n `` | Go to next file | |
| `` <esc> `` | Exit back to side panel | |
| `` c `` | Commit | Commit staged changes. |
| `` w `` | Commit changes without pre-commit hook | |
| `` C `` | Commit changes using git editor | |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Search the current view by text | |
## Main panel (patch building)
@@ -329,7 +343,22 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` <tab> `` | Switch view | Switch to other view (staged/unstaged changes). |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` v `` | Toggle range select | |
| `` e `` | Edit file | Open file in external editor. |
| `` d `` | Discard | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` E `` | Edit hunk | Edit selected hunk in external editor. |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` <left>, h `` | Go to previous hunk | |
| `` <right>, l `` | Go to next hunk | |
| `` N `` | Go to previous file | |
| `` n `` | Go to next file | |
| `` <esc> `` | Exit back to side panel | |
| `` c `` | Commit | Commit staged changes. |
| `` w `` | Commit changes without pre-commit hook | |
| `` C `` | Commit changes using git editor | |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
@@ -31,7 +31,6 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` q, <ctrl+c> `` | 終了 | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | 空白表示の切り替え | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` @ `` | 명령어 로그 메뉴 열기 | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | 푸시 | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | 업데이트 | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` P `` | 푸시 | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. If other branches are stacked below the current one and have commits to push, you are offered to push those too. |
| `` p `` | 업데이트 | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. If other branches are stacked below the current one and have changed on the remote, you are offered to update those too. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Diff 보기의 변경 사항 주위에 표시되는 컨텍스트의 크기를 늘리기 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
@@ -22,8 +22,8 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` R `` | 새로고침 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | 다음 스크린 모드 (normal/half/fullscreen) | |
| `` _ `` | 이전 스크린 모드 | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | 취소 | |
| `` ? `` | 매뉴 열기 | |
| `` <ctrl+s> `` | View filter-by-path options | View options for filtering the commit log, so that only commits matching the filter are shown. |
@@ -31,7 +31,6 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` q, <ctrl+c> `` | 종료 | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | 공백문자를 Diff 뷰에서 표시 여부 전환 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` <alt+shift+c> `` | 설정 파일 수정 | Open file in external editor. |
| `` z `` | 되돌리기 (reflog) (실험적) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | 다시 실행 (reflog) (실험적) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
@@ -85,7 +84,22 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` <tab> `` | 패널 전환 | Switch to other view (staged/unstaged changes). |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` v `` | 드래그 선택 전환 | |
| `` e `` | 파일 편집 | Open file in external editor. |
| `` <space> `` | Staged 전환 | 선택한 행을 staged / unstaged |
| `` d `` | 변경을 삭제 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` E `` | Edit hunk | Edit selected hunk in external editor. |
| `` <ctrl+o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` <left>, h `` | 이전 hunk를 선택 | |
| `` <right>, l `` | 다음 hunk를 선택 | |
| `` N `` | Go to previous file | |
| `` n `` | Go to next file | |
| `` <esc> `` | Exit back to side panel | |
| `` c `` | 커밋 변경내용 | 스테이징된 변경 사항 커밋. |
| `` w `` | Commit changes without pre-commit hook | |
| `` C `` | Git 편집기를 사용하여 변경 내용을 커밋합니다. | |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | 검색 시작 | |
## Stash
@@ -163,7 +177,22 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <mouse wheel down> (fn+up) `` | 아래로 스크롤 | |
| `` <mouse wheel up> (fn+down) `` | 위로 스크롤 | |
| `` <tab> `` | 패널 전환 | Switch to other view (staged/unstaged changes). |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` v `` | 드래그 선택 전환 | |
| `` e `` | 파일 편집 | Open file in external editor. |
| `` <space> `` | Staged 전환 | 선택한 행을 staged / unstaged |
| `` d `` | 변경을 삭제 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` E `` | Edit hunk | Edit selected hunk in external editor. |
| `` <ctrl+o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` <left>, h `` | 이전 hunk를 선택 | |
| `` <right>, l `` | 다음 hunk를 선택 | |
| `` N `` | Go to previous file | |
| `` n `` | Go to next file | |
| `` <esc> `` | Exit back to side panel | |
| `` c `` | 커밋 변경내용 | 스테이징된 변경 사항 커밋. |
| `` w `` | Commit changes without pre-commit hook | |
| `` C `` | Git 편집기를 사용하여 변경 내용을 커밋합니다. | |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | 검색 시작 | |
## 메인 패널 (Patch Building)
@@ -224,7 +253,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` d `` | 삭제 | View delete options for local/remote branch. |
| `` r `` | 체크아웃된 브랜치를 이 브랜치에 리베이스 | Rebase the checked-out branch onto the selected branch. |
| `` M `` | 현재 브랜치에 병합 | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` f `` | Fast-forward this branch from its upstream | Fast-forward selected branch from its upstream. |
| `` f `` | Fast-forward this branch from its upstream | Fast-forward selected branch from its upstream. If the branch has diverged from its upstream because the upstream branch was rewritten, and it has no commits of its own, it is reset to its upstream instead. This needs reflogs to be enabled; a bare repository doesn't keep them by default (core.logAllRefUpdates). |
| `` P `` | Push | Push de huidige branch naar de bijbehorende upstream-branch. Als er geen upstream is geconfigureerd wordt er gevraagd om een upstream-branch te configureren. |
| `` p `` | Pull | Pull wijzigingen van de remote voor de huidige branch. Als er geen upstream is geconfigureerd wordt er gevraagd om een upstream-branch te configureren. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shellcommand | Bring up a prompt where you can enter a shell command to execute. |
| `` : `` | Voer shellcommando uit | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Bekijk merge/rebase opties | Toon abort/continue/skip opties voor huidige merge/rebase. |
| `` R `` | Verversen | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | Volgende scherm modus (normaal/half/groot) | |
| `` _ `` | Vorige scherm modus | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Annuleren | |
| `` ? `` | Open menu | |
| `` <ctrl+s> `` | Bekijk scoping opties | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Afsluiten | |
| `` <ctrl+z> `` | Pauzeer de applicatie | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` <ctrl+w> `` | Witruimte weergeven in-/uitschakelen | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Verander config bestand | Open bestand in externe editor. |
| `` z `` | Ongedaan maken (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo (via reflog) (experimenteel) | Het reflog wordt gebruikt om te bepalen welk git commando moet worden gebruikt om het laatste git commando te herhalen. Wijzigingen aan de working tree worden niet meegenomen, alleen command's zijn kandidaten. |
## Lijstpaneel navigatie
@@ -114,7 +113,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` d `` | Verwijderen | View delete options for local/remote branch. |
| `` r `` | Rebase branch | Rebase de uitgecheckte branch bovenop de geselecteerde branch. |
| `` M `` | Merge in met huidige checked out branch | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` f `` | Fast-forward deze branch vanaf zijn upstream | Fast-forward selected branch from its upstream. |
| `` f `` | Fast-forward deze branch vanaf zijn upstream | Fast-forward selected branch from its upstream. If the branch has diverged from its upstream because the upstream branch was rewritten, and it has no commits of its own, it is reset to its upstream instead. This needs reflogs to be enabled; a bare repository doesn't keep them by default (core.logAllRefUpdates). |
| `` T `` | Creëer tag | |
| `` s `` | Sort order | |
| `` g `` | Bekijk reset opties | |
@@ -162,25 +161,25 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Hernoem commit | Reword the selected commit's message. |
| `` r `` | Hernoem commit | Herschrijf de commit message van de geselecteerde commit. |
| `` R `` | Hernoem commit met editor | |
| `` d `` | Verwijder commit | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` i `` | Start interactieve rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` p `` | Pick | Kies commit (wanneer midden in rebase) |
| `` <ctrl+k>, <alt+up> `` | Verplaats commit 1 naar boven | |
| `` V `` | Plak commits (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` B `` | Markeer als basiscommit voor rebase | Selecteer een basiscommit voor de volgende rebase. Als je rebased op een branch worden alleen commits boven de basiscommit meegenomen. Hiervoor wordt het `git rebase --onto` commando gebruikt. |
| `` A `` | Amend | Wijzig commit met staged veranderingen |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <ctrl+l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` t `` | Revert | Maak een revert commit voor de geselecteerde commit, die de wijzigingen in deze commit terugdraait. |
| `` T `` | Tag commit | Maak een nieuwe tag die naar de geselecteerde commit wijst. Je wordt gevraagd om een tag naam en optionele omschrijving. |
| `` <ctrl+l> `` | Log opties weergeven | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
| `` <space> `` | Uitchecken | Check de geselecteerde branch uit als een detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
@@ -232,7 +231,22 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` d `` | Verwijdert change (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` E `` | Edit hunk | Edit selected hunk in external editor. |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` <left>, h `` | Selecteer de vorige hunk | |
| `` <right>, l `` | Selecteer de volgende hunk | |
| `` w `` | Commit veranderingen zonder pre-commit hook | |
| `` C `` | Commit veranderingen met de git editor | |
| `` <ctrl+f> `` | Find base commit for fixup | Vind de commit waar je huidige wijzigingen bovenop zijn gebouwd met als doel die commit te amenden/fixen. Hierdoor hoef je dit niet met de hand te doen. Zie: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Start met zoeken | |
## Patch bouwen
@@ -242,7 +256,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <left>, h `` | Selecteer de vorige hunk | |
| `` <right>, l `` | Selecteer de volgende hunk | |
| `` v `` | Toggle drag selecteer | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` a `` | Wissel tussen hunk selectie aan of uit | Wissel tussen regel-voor-regel of hunk selectie modus. |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` o `` | Open bestand | Open bestand in standaardapplicatie. |
| `` e `` | Verander bestand | Open bestand in externe editor. |
@@ -256,7 +270,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
| `` <space> `` | Uitchecken | Check de geselecteerde branch uit als een detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
@@ -281,7 +295,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` w `` | New worktree | |
| `` M `` | Merge in met huidige checked out branch | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` r `` | Rebase branch | Rebase de uitgecheckte branch bovenop de geselecteerde branch. |
| `` d `` | Verwijderen | Delete the remote branch from the remote. |
| `` d `` | Verwijderen | Verwijder de remote branch van de remote. |
| `` u `` | Instellen als upstream | Stel in als upstream van uitgecheckte branch |
| `` s `` | Sort order | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
@@ -296,7 +310,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
|-----|--------|-------------|
| `` <enter> `` | Bekijk branches | |
| `` n `` | Voeg een nieuwe remote toe | |
| `` d `` | Verwijderen | Remove the selected remote. Any local branches tracking a remote branch from the remote will be unaffected. |
| `` d `` | Verwijderen | Verwijder de geselecteerde remote. Locale branches die een branch tracken van de remote worden niet aangepast. |
| `` e `` | Edit | Wijzig remote |
| `` f `` | Fetch | Fetch remote |
| `` F `` | Add fork remote | Quickly add a fork remote by replacing the owner in the origin URL and optionally check out a branch from new remote. |
@@ -307,7 +321,22 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` <tab> `` | Ga naar een ander paneel | Switch to other view (staged/unstaged changes). |
| `` a `` | Wissel tussen hunk selectie aan of uit | Wissel tussen regel-voor-regel of hunk selectie modus. |
| `` v `` | Toggle drag selecteer | |
| `` e `` | Verander bestand | Open bestand in externe editor. |
| `` d `` | Verwijdert change (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` E `` | Edit hunk | Edit selected hunk in external editor. |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` <left>, h `` | Selecteer de vorige hunk | |
| `` <right>, l `` | Selecteer de volgende hunk | |
| `` w `` | Commit veranderingen zonder pre-commit hook | |
| `` C `` | Commit veranderingen met de git editor | |
| `` <ctrl+f> `` | Find base commit for fixup | Vind de commit waar je huidige wijzigingen bovenop zijn gebouwd met als doel die commit te amenden/fixen. Hierdoor hoef je dit niet met de hand te doen. Zie: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Start met zoeken | |
## Staging
@@ -317,7 +346,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <left>, h `` | Selecteer de vorige hunk | |
| `` <right>, l `` | Selecteer de volgende hunk | |
| `` v `` | Toggle drag selecteer | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` a `` | Wissel tussen hunk selectie aan of uit | Wissel tussen regel-voor-regel of hunk selectie modus. |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` d `` | Verwijdert change (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
@@ -362,7 +391,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
@@ -22,8 +22,8 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` R `` | Odśwież | Odśwież stan git (tj. uruchom `git status`, `git branch`, itp. w tle, aby zaktualizować zawartość paneli). To nie uruchamia `git fetch`. |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Anuluj | |
| `` ? `` | Otwórz menu przypisań klawiszy | |
| `` <ctrl+s> `` | Pokaż opcje filtrowania | Pokaż opcje filtrowania dziennika commitów, tak aby pokazywane były tylko commity pasujące do filtra. |
@@ -31,7 +31,6 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` q, <ctrl+c> `` | Wyjdź | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Przełącz białe znaki | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` z `` | Cofnij | Dziennik reflog zostanie użyty do określenia, jakie polecenie git należy uruchomić, aby cofnąć ostatnie polecenie git. Nie obejmuje to zmian w drzewie roboczym; brane są pod uwagę tylko commity. |
| `` Z `` | Ponów | Dziennik reflog zostanie użyty do określenia, jakie polecenie git należy uruchomić, aby ponowić ostatnie polecenie git. Nie obejmuje to zmian w drzewie roboczym; brane są pod uwagę tylko commity. |
@@ -100,7 +99,22 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` <tab> `` | Przełącz widok | Przełącz na inny widok (zatwierdzone/niezatwierdzone zmiany). |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` v `` | Przełącz zaznaczenie zakresu | |
| `` e `` | Edytuj plik | Otwórz plik w zewnętrznym edytorze. |
| `` d `` | Odrzuć | Gdy zaznaczona jest niezatwierdzona zmiana, odrzuć ją używając `git reset`. Gdy zaznaczona jest zatwierdzona zmiana, cofnij zatwierdzenie. |
| `` E `` | Edytuj fragment | Edytuj wybrany fragment w zewnętrznym edytorze. |
| `` <ctrl+o> `` | Kopiuj zaznaczony tekst do schowka | |
| `` <left>, h `` | Idź do poprzedniego fragmentu | |
| `` <right>, l `` | Idź do następnego fragmentu | |
| `` N `` | Go to previous file | |
| `` n `` | Go to next file | |
| `` <esc> `` | Exit back to side panel | |
| `` c `` | Commit | Zatwierdź zmiany zatwierdzone. |
| `` w `` | Zatwierdź zmiany bez hooka pre-commit | |
| `` C `` | Zatwierdź zmiany używając edytora git | |
| `` <ctrl+f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
## Drzewa pracy
@@ -202,7 +216,22 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` d `` | Odrzuć | Gdy zaznaczona jest niezatwierdzona zmiana, odrzuć ją używając `git reset`. Gdy zaznaczona jest zatwierdzona zmiana, cofnij zatwierdzenie. |
| `` E `` | Edytuj fragment | Edytuj wybrany fragment w zewnętrznym edytorze. |
| `` <ctrl+o> `` | Kopiuj zaznaczony tekst do schowka | |
| `` <left>, h `` | Idź do poprzedniego fragmentu | |
| `` <right>, l `` | Idź do następnego fragmentu | |
| `` N `` | Go to previous file | |
| `` n `` | Go to next file | |
| `` <esc> `` | Exit back to side panel | |
| `` c `` | Commit | Zatwierdź zmiany zatwierdzone. |
| `` w `` | Zatwierdź zmiany bez hooka pre-commit | |
| `` C `` | Zatwierdź zmiany używając edytora git | |
| `` <ctrl+f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
@@ -22,8 +22,8 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` R `` | Atualizar | Atualize o estado do git (ou seja, execute `git status`, `git branch`, etc em segundo plano para atualizar o conteúdo de painéis). Isso não executa `git fetch`. |
| `` + `` | Modo de tela seguinte (normal/metade/tela cheia) | |
| `` _ `` | Modo de tela anterior | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Cancelar | |
| `` ? `` | Abrir o menu de atalhos do teclado | |
| `` <ctrl+s> `` | Ver opções de filtro | View options for filtering the commit log, so that only commits matching the filter are shown. |
@@ -31,7 +31,6 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` q, <ctrl+c> `` | Sair | |
| `` <ctrl+z> `` | Suspender a aplicação | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` <alt+shift+c> `` | Editar arquivo de configuração | Abrir arquivo no editor externo. |
| `` z `` | Desfazer | O reflog será usado para determinar qual comando git para executar para desfazer o último comando git. Isto não inclui mudanças na árvore de trabalho; apenas compromissos são tidos em consideração. |
| `` Z `` | Refazer | O reflog será usado para determinar qual comando git para executar para refazer o último comando git. Isto não inclui mudanças na árvore de trabalho; apenas compromissos são tidos em consideração. |
@@ -236,7 +235,22 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <mouse wheel down> (fn+up) `` | Rolar para baixo | |
| `` d `` | Descartar | Quando a mudança não desejada for selecionada, descarte a mudança usando `git reset`. Quando a mudança em fase é selecionada, despare a mudança. |
| `` E `` | Editar hunk | Editar o local selecionado no editor externo. |
| `` <ctrl+o> `` | Copiar texto selecionado para área de transferência | |
| `` <left>, h `` | Ir para o local anterior | |
| `` <right>, l `` | Ir para o próximo trecho | |
| `` N `` | Go to previous file | |
| `` n `` | Go to next file | |
| `` <esc> `` | Exit back to side panel | |
| `` c `` | Commit | Submeter mudanças em staging |
| `` w `` | Fazer commit de alterações sem pré-commit | |
| `` C `` | Enviar alteração usando um editor Git | |
| `` <ctrl+f> `` | Encontrar commit da base para corrigir | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Pesquisar na visualização atual por texto | |
## Painel Principal (preparação)
@@ -338,7 +352,22 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` <tab> `` | Mudar de visão | Alternar para outra visão (staged/não processadas alterações). |
| `` a `` | Toggle hunk selection | Ativa/desativa modo linha por linha vs. modo de seleção por partes. |
| `` v `` | Toggle range select | |
| `` e `` | Editar arquivo | Abrir arquivo no editor externo. |
| `` d `` | Descartar | Quando a mudança não desejada for selecionada, descarte a mudança usando `git reset`. Quando a mudança em fase é selecionada, despare a mudança. |
| `` E `` | Editar hunk | Editar o local selecionado no editor externo. |
| `` <ctrl+o> `` | Copiar texto selecionado para área de transferência | |
| `` <left>, h `` | Ir para o local anterior | |
| `` <right>, l `` | Ir para o próximo trecho | |
| `` N `` | Go to previous file | |
| `` n `` | Go to next file | |
| `` <esc> `` | Exit back to side panel | |
| `` c `` | Commit | Submeter mudanças em staging |
| `` w `` | Fazer commit de alterações sem pré-commit | |
| `` C `` | Enviar alteração usando um editor Git | |
| `` <ctrl+f> `` | Encontrar commit da base para corrigir | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Pesquisar na visualização atual por texto | |
| `` @ `` | Открыть меню журнала команд | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Отправить изменения | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | Получить и слить изменения | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` P `` | Отправить изменения | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. If other branches are stacked below the current one and have commits to push, you are offered to push those too. |
| `` p `` | Получить и слить изменения | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. If other branches are stacked below the current one and have changed on the remote, you are offered to update those too. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Увеличить размер контекста, отображаемого вокруг изменений в просмотрщике сравнении | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
@@ -22,8 +22,8 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` R `` | Обновить | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | Следующий режим экрана (нормальный/полуэкранный/полноэкранный) | |
| `` _ `` | Предыдущий режим экрана | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Отменить | |
| `` ? `` | Открыть меню | |
| `` <ctrl+s> `` | Просмотреть параметры фильтрации по пути | View options for filtering the commit log, so that only commits matching the filter are shown. |
@@ -31,7 +31,6 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` q, <ctrl+c> `` | Выйти | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Переключить отображение изменении пробелов в просмотрщике сравнении | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` <alt+shift+c> `` | Редактировать файл конфигурации | Open file in external editor. |
| `` z `` | Отменить (через reflog) (экспериментальный) | Журнал ссылок (reflog) будет использоваться для определения того, какую команду git запустить, чтобы отменить последнюю команду git. Сюда не входят изменения в рабочем дереве; учитываются только коммиты. |
| `` Z `` | Повторить (через reflog) (экспериментальный) | Журнал ссылок (reflog) будет использоваться для определения того, какую команду git нужно запустить, чтобы повторить последнюю команду git. Сюда не входят изменения в рабочем дереве; учитываются только коммиты. |
@@ -75,7 +74,22 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` <tab> `` | Переключиться на другую панель (проиндексированные/непроиндексированные изменения) | Switch to other view (staged/unstaged changes). |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` v `` | Переключить выборку перетаскивания | |
| `` e `` | Редактировать файл | Open file in external editor. |
| `` <space> `` | Переключить индекс | Переключить строку в проиндексированные / непроиндексированные |
| `` d `` | Отменить изменение (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` E `` | Изменить эту часть | Edit selected hunk in external editor. |
| `` <ctrl+o> `` | Скопировать выделенный текст в буфер обмена | |
| `` <left>, h `` | Выбрать предыдущую часть | |
| `` <right>, l `` | Выбрать следующую часть | |
| `` N `` | Go to previous file | |
| `` n `` | Go to next file | |
| `` <esc> `` | Exit back to side panel | |
| `` c `` | Сохранить изменения | Commit staged changes. |
| `` w `` | Закоммитить изменения без предварительного хука коммита | |
| `` C `` | Сохранить изменения с помощью редактора git | |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Найти | |
## Главная панель (Индексирование)
@@ -107,7 +121,22 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <tab> `` | Переключиться на другую панель (проиндексированные/непроиндексированные изменения) | Switch to other view (staged/unstaged changes). |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` v `` | Переключить выборку перетаскивания | |
| `` e `` | Редактировать файл | Open file in external editor. |
| `` <space> `` | Переключить индекс | Переключить строку в проиндексированные / непроиндексированные |
| `` d `` | Отменить изменение (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` E `` | Изменить эту часть | Edit selected hunk in external editor. |
| `` <ctrl+o> `` | Скопировать выделенный текст в буфер обмена | |
| `` <left>, h `` | Выбрать предыдущую часть | |
| `` <right>, l `` | Выбрать следующую часть | |
| `` N `` | Go to previous file | |
| `` n `` | Go to next file | |
| `` <esc> `` | Exit back to side panel | |
| `` c `` | Сохранить изменения | Commit staged changes. |
| `` w `` | Закоммитить изменения без предварительного хука коммита | |
| `` C `` | Сохранить изменения с помощью редактора git | |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Найти | |
## Главная панель (Слияние)
@@ -224,7 +253,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` d `` | Delete | View delete options for local/remote branch. |
| `` r `` | Перебазировать переключённую ветку на эту ветку | Rebase the checked-out branch onto the selected branch. |
| `` M `` | Слияние с текущей переключённой веткой | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` f `` | Перемотать эту ветку вперёд из её upstream-ветки | Fast-forward selected branch from its upstream. |
| `` f `` | Перемотать эту ветку вперёд из её upstream-ветки | Fast-forward selected branch from its upstream. If the branch has diverged from its upstream because the upstream branch was rewritten, and it has no commits of its own, it is reset to its upstream instead. This needs reflogs to be enabled; a bare repository doesn't keep them by default (core.logAllRefUpdates). |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` <alt+shift+c> `` | 编辑配置文件 | 使用外部编辑器打开文件 |
| `` z `` | 撤销 | Reflog将用于确定运行哪个git命令来撤消最后一个git命令。这并不包括对工作树的更改，只考虑提交。 |
| `` Z `` | 重做 | Reflog将用于确定运行哪个git命令来重做上一个git命令。这并不包括对工作树的更改，只考虑提交。 |
@@ -287,7 +286,22 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | 增加差異檢視中顯示變更周圍上下文的大小 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | 減小差異檢視中顯示變更周圍上下文的大小 | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | 查看合併/變基選項 | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | 重新整理 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` <ctrl+s> `` | 檢視篩選路徑選項 | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <ctrl+w> `` | 切換是否在差異檢視中顯示空格變更 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
@@ -45,21 +44,14 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <, <home> `` | 捲動到頂部 | |
| `` >, <end> `` | 捲動到底部 | |
| `` v `` | 切換拖曳選擇 | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` <shift+down> `` | 向下擴充套件選擇範圍 | |
| `` <shift+up> `` | 向上擴充套件選擇範圍 | |
| `` / `` | 搜尋 | |
| `` H `` | 向左捲動 | |
| `` L `` | 向右捲動 | |
| `` ] `` | 下一個索引標籤 | |
| `` [ `` | 上一個索引標籤 | |
## Input prompt
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | 確認 | |
| `` <esc> `` | 關閉/取消 | |
## 主面板 (補丁生成)
| Key | Action | Info |
@@ -67,12 +59,12 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <left>, h `` | 選擇上一段 | |
| `` <right>, l `` | 選擇下一段 | |
| `` v `` | 切換拖曳選擇 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` a `` | 切換程式碼塊選擇 | 切換逐行選擇與程式碼塊選擇模式。 |
| `` <ctrl+o> `` | 複製所選文本至剪貼簿 | |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` e `` | 編輯檔案 | 使用外部編輯器開啟 |
| `` <space> `` | 向 (或從) 補丁中添加/刪除行 | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` d `` | 從提交中移除行 | 從本次提交中移除所選行。此操作會在背景執行互動式變基，因此如果後續提交也修改了這些行，您可能會遇到合併衝突。 |
| `` <esc> `` | 退出自訂補丁建立器 | |
| `` / `` | 搜尋 | |
@@ -82,8 +74,23 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
|-----|--------|-------------|
| `` <mouse wheel down> (fn+up) `` | 向下捲動 | |
| `` <mouse wheel up> (fn+down) `` | 向上捲動 | |
| `` <tab> `` | 切換至另一個面板 (已預存/未預存更改) | Switch to other view (staged/unstaged changes). |
@@ -91,15 +98,15 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | 挑選程式碼片段 | |
| `` b `` | Pick both hunks | |
| `` b `` | 選取兩個區塊 | |
| `` <up>, k `` | 選擇上一段 | |
| `` <down>, j `` | 選擇下一段 | |
| `` <left>, h `` | 選擇上一個衝突 | |
| `` <right>, l `` | 選擇下一個衝突 | |
| `` z `` | 復原 | Undo last merge conflict resolution. |
| `` z `` | 復原 | 撤消上次合併衝突解決。 |
| `` e `` | 編輯檔案 | 使用外部編輯器開啟 |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` M `` | 檢視合併衝突選項 | 檢視用於解決合併衝突的選項。 |
| `` <esc> `` | 返回檔案面板 | |
## 主面板（預存）
@@ -109,19 +116,19 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <left>, h `` | 選擇上一段 | |
| `` <right>, l `` | 選擇下一段 | |
| `` v `` | 切換拖曳選擇 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` a `` | 切換程式碼塊選擇 | 切換逐行選擇與程式碼塊選擇模式。 |
| `` <ctrl+o> `` | 複製所選文本至剪貼簿 | |
| `` <space> `` | 切換預存 | 切換現有行的狀態 (已預存/未預存) |
| `` d `` | 刪除變更 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` <ctrl+o> `` | 複製縮略提交雜湊值到剪貼簿 | |
| `` <space> `` | 檢出 | 檢出所選擇的提交作為分離HEAD。 |
| `` y `` | 複製提交屬性 | 複製提交屬性到剪貼簿(如hash、URL、diff、訊息、作者)。 |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` N `` | 移動提交至新分支 | 建立一個新分支，並將目前分支未推送的提交移動到該分支。如果您打算開始新工作但忘記先建立新分支，這會很有用。<br><br>請注意，此操作忽略選擇，新分支總是從主分支建立或堆疊在目前分支之上（您可以選擇哪種方式）。 |
@@ -157,12 +164,12 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | 複製子模組名稱到剪貼簿 | |
| `` <enter> `` | Enter | 進入子模組 |
| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
| `` u `` | Update | 更新子模組 |
| `` <enter> `` | 進入 | 進入子模組 |
| `` d `` | 刪除 | 刪除選定的子模組及其相應的目錄。 |
| `` u `` | 更新 | 更新子模組 |
| `` n `` | 新增子模組 | |
| `` e `` | 更新子模組 URL | |
| `` i `` | Initialize | 初始化子模組 |
| `` i `` | 初始化 | 初始化子模組 |
| `` b `` | 查看批量子模組選項 | |
| `` / `` | 搜尋 | |
@@ -170,27 +177,27 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` n `` | New worktree | |
| `` <space> `` | Switch | Switch to the selected worktree. |
| `` n `` | 新建工作樹 | |
| `` <space> `` | 切換 | 切換到選中的工作樹。 |
| `` o `` | 在編輯器中開啟 | |
| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
| `` s `` | 壓縮 (Squash) | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | 修復 (Fixup) | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` s `` | 壓縮 (Squash) | 將已選提交壓縮到該提交之下。這些選定的提交的訊息會附加到該提交的訊息之下。 |
| `` f `` | 修復 (Fixup) | 將選定的提交合併到其下面的提交中。與壓縮類似，但所選提交的訊息將被丟棄。 |
| `` c `` | 設定修復提交資訊 | 設定修復提交的資訊選項。-C 選項表示使用此提交的資訊，而非目標提交的資訊。 |
| `` r `` | 改寫提交 | 改寫選中的提交訊息 |
| `` R `` | 使用編輯器改寫提交 | |
| `` d `` | 刪除提交 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` d `` | 刪除提交 | 刪除選中的提交。這將透過變基從分支中刪除該提交，如果該提交修改的內容依賴於後續的提交，則需要解決合併衝突。 |
| `` e `` | 編輯(開始互動變基) | 編輯提交 |
| `` i `` | 開始互動變基 | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` i `` | 開始互動變基 | 為分支上的提交啟動互動式變基。這將包括從 HEAD 提交到第一個合併提交或主分支提交的所有提交。<br>如果您想從所選提交啟動互動式變基，請按 `e`。 |
| `` y `` | 複製提交屬性 | 複製提交屬性到剪貼簿(如hash、URL、diff、訊息、作者)。 |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` N `` | 移動提交至新分支 | 建立一個新分支，並將目前分支未推送的提交移動到該分支。如果您打算開始新工作但忘記先建立新分支，這會很有用。<br><br>請注意，此操作忽略選擇，新分支總是從主分支建立或堆疊在目前分支之上（您可以選擇哪種方式）。 |
@@ -232,30 +239,30 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <ctrl+o> `` | 複製檔案名稱到剪貼簿 | |
| `` y `` | 複製到剪貼簿 | |
| `` c `` | 檢出 | 檢出檔案 |
| `` d `` | 捨棄 | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` d `` | 捨棄 | 放棄對此檔案的提交變更。 |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` e `` | 編輯 | 使用外部編輯器開啟 |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` <space> `` | 切換檔案是否包含在補丁中 | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | 切換所有檔案是否包含在補丁中 | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | 輸入檔案以將選定的行添加至補丁（或切換目錄折疊） | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
| `` ` `` | 顯示檔案樹狀視圖 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` <space> `` | 套用 | Apply the stash entry to your working directory. |
| `` g `` | 還原 | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | 捨棄 | Remove the stash entry from the stash list. |
| `` n `` | 新分支 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` <ctrl+o> `` | 複製縮略提交雜湊值到剪貼簿 | |
| `` <space> `` | 檢出 | 檢出所選擇的提交作為分離HEAD。 |
| `` y `` | 複製提交屬性 | 複製提交屬性到剪貼簿(如hash、URL、diff、訊息、作者)。 |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` N `` | 移動提交至新分支 | 建立一個新分支，並將目前分支未推送的提交移動到該分支。如果您打算開始新工作但忘記先建立新分支，這會很有用。<br><br>請注意，此操作忽略選擇，新分支總是從主分支建立或堆疊在目前分支之上（您可以選擇哪種方式）。 |
@@ -287,18 +294,18 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` i `` | 顯示 git-flow 選項 | |
| `` <space> `` | 檢出 | 檢出選定的項目。 |
| `` n `` | 新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` N `` | 移動提交至新分支 | 建立一個新分支，並將目前分支未推送的提交移動到該分支。如果您打算開始新工作但忘記先建立新分支，這會很有用。<br><br>請注意，此操作忽略選擇，新分支總是從主分支建立或堆疊在目前分支之上（您可以選擇哪種方式）。 |
| `` w `` | 新建工作樹 | |
| `` o `` | 建立拉取請求 | |
| `` O `` | 建立拉取請求選項 | |
| `` G `` | Open pull request in browser | |
| `` G `` | 在瀏覽器中開啟拉取請求 | |
| `` <ctrl+y> `` | 複製拉取請求的 URL 到剪貼板 | |
| `` c `` | 根據名稱檢出 | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | 強制檢出 | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
| `` d `` | 刪除 | View delete options for local/remote branch. |
| `` r `` | 將已檢出的分支變基至此分支 | Rebase the checked-out branch onto the selected branch. |
| `` M `` | 合併到當前檢出的分支 | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` c `` | 根據名稱檢出 | 按名稱檢出。在輸入框中，您可以輸入'-' 來切換到最後一個分支。 |
| `` - `` | 簽出上一個分支 | |
| `` F `` | 強制檢出 | 強制檢出所選分支。這將在檢出所選分支之前放棄工作目錄中的所有本地更改。 |
| `` d `` | 刪除 | 檢視本地/遠端分支的刪除選項。 |
| `` r `` | 將已檢出的分支變基至此分支 | 將檢出的分支變基到所選的分支上。 |
| `` M `` | 合併到當前檢出的分支 | 檢視將選中項合併到目前分支的選項(正常合併，壓縮合並) |
| `` f `` | 從上游快進此分支 | 從遠端快進所選的分支 |
| `` T `` | 建立標籤 | |
| `` s `` | 排序規則 | |
@@ -306,7 +313,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` R `` | 重新命名分支 | |
| `` u `` | 檢視遠端設定 | 檢視有關遠端分支的設定（例如重設至遠端） |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` 0 `` | Focus main view | |
| `` 0 `` | 聚焦主檢視 | |
| `` <enter> `` | 檢視提交 | |
| `` / `` | 搜尋 | |
@@ -314,15 +321,15 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | Copy tag to clipboard | |
| `` <space> `` | 檢出 | Checkout the selected tag as a detached HEAD. |
| `` n `` | 建立標籤 | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
| `` w `` | New worktree | |
| `` d `` | 刪除 | View delete options for local/remote tag. |
| `` P `` | 推送標籤 | Push the selected tag to a remote. You'll be prompted to select a remote. |
| `` g `` | 重設 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` <ctrl+o> `` | 複製標籤到剪貼簿 | |
| `` <space> `` | 檢出 | 檢出選擇的標籤作為分離的HEAD。 |
| `` n `` | 建立標籤 | 基於目前提交建立一個新標籤。您將在彈窗中輸入標籤名稱和描述(可選)。 |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` s `` | 收藏 | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
| `` S `` | 檢視收藏選項 | View stash options (e.g. stash all, stash staged, stash unstaged). |
| `` a `` | 全部預存/取消預存 | Toggle staged/unstaged for all files in working tree. |
| `` <enter> `` | 選擇檔案中的單個程式碼塊/行，或展開/折疊目錄 | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
| `` s `` | 收藏 | 貯藏所有變更.若要使用其他貯藏變體,請使用檢視貯藏選項快捷鍵。 |
| `` S `` | 檢視收藏選項 | 檢視貯藏選項（例如：貯藏所有、貯藏已暫存變更、貯藏未暫存變更）。 |
| `` D `` | 重設 | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | 顯示檔案樹狀視圖 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
Custom diff renderers are useful for showing a better rendering of a diff than git's builtin raw diff, and using one is strongly recommended (I personally prefer delta myself, but that's a matter of personal preference). There are three types of diff renderers that lazygit supports:
- **stdin filters**, e.g. [delta](#delta) and [diff-so-fancy](#diff-so-fancy). They take git's raw output as stdin and produce something nicer on stdout, and they are hooked up using git's GIT_PAGER mechanism. (These used to be called "custom pagers" in earlier lazygit versions.)
- **external diff programs**, e.g. difftastic; these are called using git's `--ext-diff` flag, and they take over diff generation from git completely rather than post-processing git's output.
- **git's raw output using custom arguments**; mainly useful for `--color-words` (or `--word-diff` if you are color blind).
Diff renderers are configured with the `diffRenderers` array in the `git` section of lazygit's config file; it is an array because you can have multiple entries that you can cycle through with the `|` key. This can be useful if you usually prefer a particular diff renderer, but want to use a different one for certain kinds of diffs.
Fields that are shared by all renderer types:
- **type** The type of diff renderer; choices are `stdinFilter`, `extDiff`, or `rawGit`. `stdinFilter` is the default, because it's the most common one; so you can omit this if you use delta.
- **name** A name that is shown in the status bar toast when cycling renderers; defaults to the first word of the renderer command, but can be useful e.g. to distinguish "delta" from "delta side-by-side" if you have entries for both.
Fields only for `stdinFilter`:
- **command** The command line to use for `GIT_PAGER`.
- **colorArg** whether you want the `--color=always` arg in your `git diff` command. Some diff renderers want it set to `always`, others want it set to `never`. The default is `always`, since that's what most renderers need.
Fields only for `extDiff`:
- **command** The command line to use for the `diff.external` git config. If left empty, it uses the global value of git's `diff.external` config; this can be useful if you also want to use it for diffs on the command line, and it also has the advantage that you can configure it per file type in `.gitattributes`; see https://git-scm.com/docs/gitattributes#_defining_an_external_diff_driver.
You can include the `{{diffContext}}` template variable to pass lazygit's current diff context size (the value controlled by the `{`/`}` keybindings) to the diff tool.
Fields only for `rawGit`:
- **args** The additional arguments to use in the `git diff` or `git show` call (e.g. `--color-words`), as an array of strings.
A cool feature of delta is --hyperlinks, which renders clickable links for the line numbers in the left margin, and lazygit supports these. To use them, set the `command:` field to `delta --dark --paging=never --line-numbers --hyperlinks --hyperlinks-file-link-format="lazygit-edit://{path}:{line}"`; this allows you to click on an underlined line number in the diff to jump right to that same line in your editor.
Note that delta's `--navigate` option doesn't work in lazygit, for technical reasons.
## Diff-so-fancy
```yaml
git:
diffRenderers:
- command:diff-so-fancy
```
## ydiff
```yaml
gui:
sidePanelWidth:0.2# gives you more space to show things side-by-side
Lazygit supports custom pagers, [configured](/docs/Config.md) in the config.yml file (which can be opened by pressing `e` in the Status panel).
Multiple pagers are supported; you can cycle through them with the `|` key. This can be useful if you usually prefer a particular pager, but want to use a different one for certain kinds of diffs.
Pagers are configured with the `pagers` array in the git section; here's an example for a multi-pager setup (use an empty object `{}` for the default builtin diff display that doesn't use a pager):
The `colorArg` key is for whether you want the `--color=always` arg in your `git diff` command. Some pagers want it set to `always`, others want it set to `never`. The default is `always`, since that's what most pagers need.
## Delta:
```yaml
git:
pagers:
- pager:delta --dark --paging=never
```
A cool feature of delta is --hyperlinks, which renders clickable links for the line numbers in the left margin, and lazygit supports these. To use them, set the `pager:` config to `delta --dark --paging=never --line-numbers --hyperlinks --hyperlinks-file-link-format="lazygit-edit://{path}:{line}"`; this allows you to click on an underlined line number in the diff to jump right to that same line in your editor.
Note that delta's `--navigate` option doesn't work in lazygit, for technical reasons.
## Diff-so-fancy
```yaml
git:
pagers:
- pager:diff-so-fancy
```
## ydiff
```yaml
gui:
sidePanelWidth:0.2# gives you more space to show things side-by-side
Be careful with this one, I think the homebrew and pip versions are behind master. I needed to directly download the ydiff script to get the no-pager functionality working.
## Using external diff commands
Some diff tools can't work as a simple pager like the ones above do, because they need access to the entire diff, so just post-processing git's diff is not enough for them. The most notable example is probably [difftastic](https://difftastic.wilfred.me.uk).
These can be used in lazygit by using the `externalDiffCommand` config; in the case of difftastic, that could be
```yaml
git:
pagers:
- externalDiffCommand:difft --color=always
```
The `colorArg` option is not used in this case.
You can add whatever extra arguments you prefer for your difftool; for instance
This can also be used for normal git diffs with custom parameters, such as `--color-words` or `--word-diff` which some people find useful. To do that, save a script like this to, say, `~/bin/color-words.sh`:
Instead of setting this command in lazygit's `externalDiffCommand` config, you can also tell lazygit to use the external diff command that is configured in git itself (`diff.external`), by using
```yaml
git:
pagers:
- useExternalDiffGitConfig:true
```
This can be useful if you also want to use it for diffs on the command line, and it also has the advantage that you can configure it per file type in `.gitattributes`; see https://git-scm.com/docs/gitattributes#_defining_an_external_diff_driver.
`pager`, `externalDiffCommand`, and `useExternalDiffGitConfig` are alternative ways of producing the diff, so a pager entry may use at most one of them.
Depending on the currently focused view, hitting '/' will bring up a filter or search prompt. When filtering, the contents of the view will be filtered down to only those lines which match the query string. When searching, the contents of the view are not filtered, but matching lines are highlighted and you can iterate through matches with `n`/`N`.
We intend to support filtering for the files view soon, but at the moment it uses searching. We intend to continue using search for the commits view because you typically care about the commits that come before/after a matching commit.
In the commits view we don't filter, but search; this is deliberate because you typically care about the commits that come before/after a matching commit.
If you would like both filtering and searching to be enabled on a given view, please raise an issue for this.
## Menu filtering
The keybindings (`?`) and recent repositories menus can be filtered simply by typing. The filter field appears at the bottom of the menu while you type; there is no need to press `/` or confirm the filter before navigating the results.
## Filtering files by status
You can filter the files view to only show staged/unstaged files by pressing `<c-b>` in the files view.
@@ -22,8 +22,8 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` R `` | Refresh | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
@@ -22,8 +22,8 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` R `` | 새로고침 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | 다음 스크린 모드 (normal/half/fullscreen) | |
| `` _ `` | 이전 스크린 모드 | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | 취소 | |
| `` ? `` | 매뉴 열기 | |
| `` <ctrl+s> `` | View filter-by-path options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` P `` | Push | Push de huidige branch naar de bijbehorende upstream-branch. Als er geen upstream is geconfigureerd wordt er gevraagd om een upstream-branch te configureren. |
| `` p `` | Pull | Pull wijzigingen van de remote voor de huidige branch. Als er geen upstream is geconfigureerd wordt er gevraagd om een upstream-branch te configureren. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shellcommand | Bring up a prompt where you can enter a shell command to execute. |
| `` : `` | Voer shellcommando uit | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Bekijk merge/rebase opties | Toon abort/continue/skip opties voor huidige merge/rebase. |
| `` R `` | Verversen | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | Volgende scherm modus (normaal/half/groot) | |
| `` _ `` | Vorige scherm modus | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Annuleren | |
| `` ? `` | Open menu | |
| `` <ctrl+s> `` | Bekijk scoping opties | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Afsluiten | |
| `` <ctrl+z> `` | Pauzeer de applicatie | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+w> `` | Witruimte weergeven in-/uitschakelen | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Verander config bestand | Open bestand in externe editor. |
| `` z `` | Ongedaan maken (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo (via reflog) (experimenteel) | Het reflog wordt gebruikt om te bepalen welk git commando moet worden gebruikt om het laatste git commando te herhalen. Wijzigingen aan de working tree worden niet meegenomen, alleen command's zijn kandidaten. |
## Lijstpaneel navigatie
@@ -161,25 +161,25 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Hernoem commit | Reword the selected commit's message. |
| `` r `` | Hernoem commit | Herschrijf de commit message van de geselecteerde commit. |
| `` R `` | Hernoem commit met editor | |
| `` d `` | Verwijder commit | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` i `` | Start interactieve rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` p `` | Pick | Kies commit (wanneer midden in rebase) |
| `` <ctrl+k>, <alt+up> `` | Verplaats commit 1 naar boven | |
| `` V `` | Plak commits (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` B `` | Markeer als basiscommit voor rebase | Selecteer een basiscommit voor de volgende rebase. Als je rebased op een branch worden alleen commits boven de basiscommit meegenomen. Hiervoor wordt het `git rebase --onto` commando gebruikt. |
| `` A `` | Amend | Wijzig commit met staged veranderingen |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <ctrl+l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` t `` | Revert | Maak een revert commit voor de geselecteerde commit, die de wijzigingen in deze commit terugdraait. |
| `` T `` | Tag commit | Maak een nieuwe tag die naar de geselecteerde commit wijst. Je wordt gevraagd om een tag naam en optionele omschrijving. |
| `` <ctrl+l> `` | Log opties weergeven | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
| `` <space> `` | Uitchecken | Check de geselecteerde branch uit als een detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
@@ -241,7 +241,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <left>, h `` | Selecteer de vorige hunk | |
| `` <right>, l `` | Selecteer de volgende hunk | |
| `` v `` | Toggle drag selecteer | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` a `` | Wissel tussen hunk selectie aan of uit | Wissel tussen regel-voor-regel of hunk selectie modus. |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` o `` | Open bestand | Open bestand in standaardapplicatie. |
| `` e `` | Verander bestand | Open bestand in externe editor. |
@@ -255,7 +255,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
| `` <space> `` | Uitchecken | Check de geselecteerde branch uit als een detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
@@ -280,7 +280,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` w `` | New worktree | |
| `` M `` | Merge in met huidige checked out branch | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` r `` | Rebase branch | Rebase de uitgecheckte branch bovenop de geselecteerde branch. |
| `` d `` | Verwijderen | Delete the remote branch from the remote. |
| `` d `` | Verwijderen | Verwijder de remote branch van de remote. |
| `` u `` | Instellen als upstream | Stel in als upstream van uitgecheckte branch |
| `` s `` | Sort order | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
@@ -295,7 +295,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
|-----|--------|-------------|
| `` <enter> `` | Bekijk branches | |
| `` n `` | Voeg een nieuwe remote toe | |
| `` d `` | Verwijderen | Remove the selected remote. Any local branches tracking a remote branch from the remote will be unaffected. |
| `` d `` | Verwijderen | Verwijder de geselecteerde remote. Locale branches die een branch tracken van de remote worden niet aangepast. |
| `` e `` | Edit | Wijzig remote |
| `` f `` | Fetch | Fetch remote |
| `` F `` | Add fork remote | Quickly add a fork remote by replacing the owner in the origin URL and optionally check out a branch from new remote. |
@@ -316,7 +316,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <left>, h `` | Selecteer de vorige hunk | |
| `` <right>, l `` | Selecteer de volgende hunk | |
| `` v `` | Toggle drag selecteer | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` a `` | Wissel tussen hunk selectie aan of uit | Wissel tussen regel-voor-regel of hunk selectie modus. |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` d `` | Verwijdert change (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
@@ -361,7 +361,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
@@ -22,8 +22,8 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` R `` | Odśwież | Odśwież stan git (tj. uruchom `git status`, `git branch`, itp. w tle, aby zaktualizować zawartość paneli). To nie uruchamia `git fetch`. |
@@ -22,8 +22,8 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` R `` | Atualizar | Atualize o estado do git (ou seja, execute `git status`, `git branch`, etc em segundo plano para atualizar o conteúdo de painéis). Isso não executa `git fetch`. |
| `` + `` | Modo de tela seguinte (normal/metade/tela cheia) | |
| `` _ `` | Modo de tela anterior | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Cancelar | |
| `` ? `` | Abrir o menu de atalhos do teclado | |
| `` <ctrl+s> `` | Ver opções de filtro | View options for filtering the commit log, so that only commits matching the filter are shown. |
@@ -22,8 +22,8 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` R `` | Обновить | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | Следующий режим экрана (нормальный/полуэкранный/полноэкранный) | |
| `` _ `` | Предыдущий режим экрана | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Отменить | |
| `` ? `` | Открыть меню | |
| `` <ctrl+s> `` | Просмотреть параметры фильтрации по пути | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | 增加差異檢視中顯示變更周圍上下文的大小 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | 減小差異檢視中顯示變更周圍上下文的大小 | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | 查看合併/變基選項 | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | 重新整理 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` <ctrl+s> `` | 檢視篩選路徑選項 | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <ctrl+w> `` | 切換是否在差異檢視中顯示空格變更 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
@@ -44,21 +44,14 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <, <home> `` | 捲動到頂部 | |
| `` >, <end> `` | 捲動到底部 | |
| `` v `` | 切換拖曳選擇 | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` <shift+down> `` | 向下擴充套件選擇範圍 | |
| `` <shift+up> `` | 向上擴充套件選擇範圍 | |
| `` / `` | 搜尋 | |
| `` H `` | 向左捲動 | |
| `` L `` | 向右捲動 | |
| `` ] `` | 下一個索引標籤 | |
| `` [ `` | 上一個索引標籤 | |
## Input prompt
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | 確認 | |
| `` <esc> `` | 關閉/取消 | |
## 主面板 (補丁生成)
| Key | Action | Info |
@@ -66,12 +59,12 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <left>, h `` | 選擇上一段 | |
| `` <right>, l `` | 選擇下一段 | |
| `` v `` | 切換拖曳選擇 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` a `` | 切換程式碼塊選擇 | 切換逐行選擇與程式碼塊選擇模式。 |
| `` <ctrl+o> `` | 複製所選文本至剪貼簿 | |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` e `` | 編輯檔案 | 使用外部編輯器開啟 |
| `` <space> `` | 向 (或從) 補丁中添加/刪除行 | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` d `` | 從提交中移除行 | 從本次提交中移除所選行。此操作會在背景執行互動式變基，因此如果後續提交也修改了這些行，您可能會遇到合併衝突。 |
| `` <esc> `` | 退出自訂補丁建立器 | |
| `` / `` | 搜尋 | |
@@ -81,8 +74,8 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
|-----|--------|-------------|
| `` <mouse wheel down> (fn+up) `` | 向下捲動 | |
| `` <mouse wheel up> (fn+down) `` | 向上捲動 | |
| `` <tab> `` | 切換至另一個面板 (已預存/未預存更改) | Switch to other view (staged/unstaged changes). |
@@ -90,15 +83,15 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | 挑選程式碼片段 | |
| `` b `` | Pick both hunks | |
| `` b `` | 選取兩個區塊 | |
| `` <up>, k `` | 選擇上一段 | |
| `` <down>, j `` | 選擇下一段 | |
| `` <left>, h `` | 選擇上一個衝突 | |
| `` <right>, l `` | 選擇下一個衝突 | |
| `` z `` | 復原 | Undo last merge conflict resolution. |
| `` z `` | 復原 | 撤消上次合併衝突解決。 |
| `` e `` | 編輯檔案 | 使用外部編輯器開啟 |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` M `` | 檢視合併衝突選項 | 檢視用於解決合併衝突的選項。 |
| `` <esc> `` | 返回檔案面板 | |
## 主面板（預存）
@@ -108,19 +101,19 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <left>, h `` | 選擇上一段 | |
| `` <right>, l `` | 選擇下一段 | |
| `` v `` | 切換拖曳選擇 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` a `` | 切換程式碼塊選擇 | 切換逐行選擇與程式碼塊選擇模式。 |
| `` <ctrl+o> `` | 複製所選文本至剪貼簿 | |
| `` <space> `` | 切換預存 | 切換現有行的狀態 (已預存/未預存) |
| `` d `` | 刪除變更 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` <ctrl+o> `` | 複製縮略提交雜湊值到剪貼簿 | |
| `` <space> `` | 檢出 | 檢出所選擇的提交作為分離HEAD。 |
| `` y `` | 複製提交屬性 | 複製提交屬性到剪貼簿(如hash、URL、diff、訊息、作者)。 |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` N `` | 移動提交至新分支 | 建立一個新分支，並將目前分支未推送的提交移動到該分支。如果您打算開始新工作但忘記先建立新分支，這會很有用。<br><br>請注意，此操作忽略選擇，新分支總是從主分支建立或堆疊在目前分支之上（您可以選擇哪種方式）。 |
@@ -156,12 +149,12 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | 複製子模組名稱到剪貼簿 | |
| `` <enter> `` | Enter | 進入子模組 |
| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
| `` u `` | Update | 更新子模組 |
| `` <enter> `` | 進入 | 進入子模組 |
| `` d `` | 刪除 | 刪除選定的子模組及其相應的目錄。 |
| `` u `` | 更新 | 更新子模組 |
| `` n `` | 新增子模組 | |
| `` e `` | 更新子模組 URL | |
| `` i `` | Initialize | 初始化子模組 |
| `` i `` | 初始化 | 初始化子模組 |
| `` b `` | 查看批量子模組選項 | |
| `` / `` | 搜尋 | |
@@ -169,27 +162,27 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` n `` | New worktree | |
| `` <space> `` | Switch | Switch to the selected worktree. |
| `` n `` | 新建工作樹 | |
| `` <space> `` | 切換 | 切換到選中的工作樹。 |
| `` o `` | 在編輯器中開啟 | |
| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
| `` s `` | 壓縮 (Squash) | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | 修復 (Fixup) | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` s `` | 壓縮 (Squash) | 將已選提交壓縮到該提交之下。這些選定的提交的訊息會附加到該提交的訊息之下。 |
| `` f `` | 修復 (Fixup) | 將選定的提交合併到其下面的提交中。與壓縮類似，但所選提交的訊息將被丟棄。 |
| `` c `` | 設定修復提交資訊 | 設定修復提交的資訊選項。-C 選項表示使用此提交的資訊，而非目標提交的資訊。 |
| `` r `` | 改寫提交 | 改寫選中的提交訊息 |
| `` R `` | 使用編輯器改寫提交 | |
| `` d `` | 刪除提交 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` d `` | 刪除提交 | 刪除選中的提交。這將透過變基從分支中刪除該提交，如果該提交修改的內容依賴於後續的提交，則需要解決合併衝突。 |
| `` e `` | 編輯(開始互動變基) | 編輯提交 |
| `` i `` | 開始互動變基 | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` i `` | 開始互動變基 | 為分支上的提交啟動互動式變基。這將包括從 HEAD 提交到第一個合併提交或主分支提交的所有提交。<br>如果您想從所選提交啟動互動式變基，請按 `e`。 |
| `` y `` | 複製提交屬性 | 複製提交屬性到剪貼簿(如hash、URL、diff、訊息、作者)。 |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` N `` | 移動提交至新分支 | 建立一個新分支，並將目前分支未推送的提交移動到該分支。如果您打算開始新工作但忘記先建立新分支，這會很有用。<br><br>請注意，此操作忽略選擇，新分支總是從主分支建立或堆疊在目前分支之上（您可以選擇哪種方式）。 |
@@ -231,30 +224,30 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` <ctrl+o> `` | 複製檔案名稱到剪貼簿 | |
| `` y `` | 複製到剪貼簿 | |
| `` c `` | 檢出 | 檢出檔案 |
| `` d `` | 捨棄 | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` d `` | 捨棄 | 放棄對此檔案的提交變更。 |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` e `` | 編輯 | 使用外部編輯器開啟 |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` <space> `` | 切換檔案是否包含在補丁中 | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | 切換所有檔案是否包含在補丁中 | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | 輸入檔案以將選定的行添加至補丁（或切換目錄折疊） | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
| `` ` `` | 顯示檔案樹狀視圖 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` <space> `` | 套用 | Apply the stash entry to your working directory. |
| `` g `` | 還原 | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | 捨棄 | Remove the stash entry from the stash list. |
| `` n `` | 新分支 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` <ctrl+o> `` | 複製縮略提交雜湊值到剪貼簿 | |
| `` <space> `` | 檢出 | 檢出所選擇的提交作為分離HEAD。 |
| `` y `` | 複製提交屬性 | 複製提交屬性到剪貼簿(如hash、URL、diff、訊息、作者)。 |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` N `` | 移動提交至新分支 | 建立一個新分支，並將目前分支未推送的提交移動到該分支。如果您打算開始新工作但忘記先建立新分支，這會很有用。<br><br>請注意，此操作忽略選擇，新分支總是從主分支建立或堆疊在目前分支之上（您可以選擇哪種方式）。 |
@@ -286,18 +279,18 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` i `` | 顯示 git-flow 選項 | |
| `` <space> `` | 檢出 | 檢出選定的項目。 |
| `` n `` | 新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` N `` | 移動提交至新分支 | 建立一個新分支，並將目前分支未推送的提交移動到該分支。如果您打算開始新工作但忘記先建立新分支，這會很有用。<br><br>請注意，此操作忽略選擇，新分支總是從主分支建立或堆疊在目前分支之上（您可以選擇哪種方式）。 |
| `` w `` | 新建工作樹 | |
| `` o `` | 建立拉取請求 | |
| `` O `` | 建立拉取請求選項 | |
| `` G `` | Open pull request in browser | |
| `` G `` | 在瀏覽器中開啟拉取請求 | |
| `` <ctrl+y> `` | 複製拉取請求的 URL 到剪貼板 | |
| `` c `` | 根據名稱檢出 | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | 強制檢出 | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
| `` d `` | 刪除 | View delete options for local/remote branch. |
| `` r `` | 將已檢出的分支變基至此分支 | Rebase the checked-out branch onto the selected branch. |
| `` M `` | 合併到當前檢出的分支 | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` c `` | 根據名稱檢出 | 按名稱檢出。在輸入框中，您可以輸入'-' 來切換到最後一個分支。 |
| `` - `` | 簽出上一個分支 | |
| `` F `` | 強制檢出 | 強制檢出所選分支。這將在檢出所選分支之前放棄工作目錄中的所有本地更改。 |
| `` d `` | 刪除 | 檢視本地/遠端分支的刪除選項。 |
| `` r `` | 將已檢出的分支變基至此分支 | 將檢出的分支變基到所選的分支上。 |
| `` M `` | 合併到當前檢出的分支 | 檢視將選中項合併到目前分支的選項(正常合併，壓縮合並) |
| `` f `` | 從上游快進此分支 | 從遠端快進所選的分支 |
| `` T `` | 建立標籤 | |
| `` s `` | 排序規則 | |
@@ -305,7 +298,7 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| `` R `` | 重新命名分支 | |
| `` u `` | 檢視遠端設定 | 檢視有關遠端分支的設定（例如重設至遠端） |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` 0 `` | Focus main view | |
| `` 0 `` | 聚焦主檢視 | |
| `` <enter> `` | 檢視提交 | |
| `` / `` | 搜尋 | |
@@ -313,15 +306,15 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | Copy tag to clipboard | |
| `` <space> `` | 檢出 | Checkout the selected tag as a detached HEAD. |
| `` n `` | 建立標籤 | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
| `` w `` | New worktree | |
| `` d `` | 刪除 | View delete options for local/remote tag. |
| `` P `` | 推送標籤 | Push the selected tag to a remote. You'll be prompted to select a remote. |
| `` g `` | 重設 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` <ctrl+o> `` | 複製標籤到剪貼簿 | |
| `` <space> `` | 檢出 | 檢出選擇的標籤作為分離的HEAD。 |
| `` n `` | 建立標籤 | 基於目前提交建立一個新標籤。您將在彈窗中輸入標籤名稱和描述(可選)。 |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` s `` | 收藏 | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
| `` S `` | 檢視收藏選項 | View stash options (e.g. stash all, stash staged, stash unstaged). |
| `` a `` | 全部預存/取消預存 | Toggle staged/unstaged for all files in working tree. |
| `` <enter> `` | 選擇檔案中的單個程式碼塊/行，或展開/折疊目錄 | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
| `` s `` | 收藏 | 貯藏所有變更.若要使用其他貯藏變體,請使用檢視貯藏選項快捷鍵。 |
| `` S `` | 檢視收藏選項 | 檢視貯藏選項（例如：貯藏所有、貯藏已暫存變更、貯藏未暫存變更）。 |
| `` D `` | 重設 | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | 顯示檔案樹狀視圖 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
// the price of having a convenient interface where we can say .New(...).Run() is that our builder now depends on our runner, so when we want to wrap the default builder/runner in new functionality we need to jump through some hoops. We could avoid the use of a decorator function here by just exporting the runner field on the default builder but that would be misleading because we don't want anybody using that to run commands (i.e. we want there to be a single API used across the codebase)
// here we're wrapping the default command runner in some git-specific stuff e.g. retry logic if we get an error due to the presence of .git/index.lock
const(
WaitTime=50*time.Millisecond
RetryCount=5
// defaultInitialRetryDelay is how long we wait before the first retry of a
// command that failed with a transient lock error. We double it before each
// subsequent retry (see retryOnLockError), so across maxRetries attempts we
// wait for a bit over a second in total. That's long enough to outlast the
// brief window during which another git process holds a lock we need —
// typically our own foreground `git status` refresh, which takes index.lock
// to persist its refreshed stat-cache.
defaultInitialRetryDelay=20*time.Millisecond
maxRetries=7
)
typegitCmdObjRunnerstruct{
log*logrus.Entry
innerRunneroscommands.ICmdObjRunner
// initialRetryDelay is the wait before the first lock-error retry. It's a
// field rather than the constant directly so tests can set it to zero and
// not actually sleep.
initialRetryDelaytime.Duration
}
// isRetryableError returns true if the error output indicates a transient
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
