Some terminals provide a modifier key that bypasses mouse capture so
that text can be selected with the mouse and copied to the clipboard
(option in iTerm, shift in Ghostty), but others don't (e.g. the
terminals built into VS Code and Zed). In those, selecting text
requires setting gui.mouseEvents to false in the config file and back
again afterwards, which is inconvenient.
Add a global keybinding (% by default) that toggles mouse capture on
the fly. Like the whitespace toggle, it flips the in-memory config
value, so the toggled state lasts until the config file is changed and
reloaded.
The key needs to be free in every panel, and % is; as a plain rune it
also arrives reliably in every terminal on all platforms, and it can't
fire while typing in a text prompt, since editors consume plain runes.
An alt-based binding would have been more mnemonic, but doesn't reach
lazygit in the built-in terminals of VS Code and Zed on macOS (the
very terminals that need this feature) unless the option key is
configured to act as meta; and a ctrl-based binding would burn one of
the few remaining free ctrl keys, which are better saved for future
features that get used more frequently.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The model<->view index conversions were derived from arrays that only
renderLines populated. That made them depend on the list having been
rendered (so a conversion before the first render ignored the non-model
items), and it made them go stale whenever the model changed after a
render: converting an index then returned a wrong result, and once the
model had grown past the last rendered length the conversion indexed a
too-short array and panicked (seen in cherry_pick under -race).
The conversion is a pure function of the current list length and the
current non-model items, and needs none of the rendered display strings.
Compute it directly and drop the cached arrays, so the result is always
consistent with the current model and no longer depends on rendering.
The model<->view index conversions were derived from arrays that only
renderLines populated. That made them depend on the list having been
rendered (so a conversion before the first render ignored the non-model
items), and it made them go stale whenever the model changed after a
render: converting an index then returned a wrong result, and once the
model had grown past the last rendered length the conversion indexed a
too-short array and panicked (seen in cherry_pick under -race).
The conversion is a pure function of the current list length and the
current non-model items, and needs none of the rendered display strings.
Compute it directly and drop the cached arrays, so the result is always
consistent with the current model and no longer depends on rendering.
searchModelCommits converts every commit's index, and building the
non-model items can be O(len) mid-rebase, so it would now be quadratic;
snapshot the non-model items once via modelToViewIndexConverter instead
of rebuilding them per index.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
ModelIndexToViewIndex and ViewIndexToModelIndex read conversion arrays
that only renderLines populates. So converting an index before the list
has been rendered ignores the non-model items (e.g. section headers) and
returns a wrong result; the same staleness makes a conversion after the
model has grown index a too-short array and panic (seen in cherry_pick
under -race).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Close read and called stopCurrentTask with no lock, while NewTask's
goroutine assigns it (and constructs the sync.Once it closes over) under
waitingMutex. On shutdown Close runs while a render task spawned by the
last layout is still starting, so the two raced on the field and the
once (three DATA RACE blocks under -race, e.g. cherry_pick).
Read stopCurrentTask once under waitingMutex and call the captured value
instead of re-reading the field, which establishes the happens-before
the once needs. This can't deadlock: no task holds waitingMutex across a
blocking UI-thread hop, so Close can always take it, and a task wedged in
such a hop is still bounded by the existing 3s timeout.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Some tests assert that a specific commit subject does or doesn't occur
in the main view; interactive_rebase/outside_rebase_range_select.go is
an example for this, it asserts `t.Views().Main().Content(
DoesNotContain("commit 06"))`. The problem with this kind of assertion
and our test commit naming scheme is that the diff view begins with a
"commit <hash>" line, and when that hash happens to start with "06" the
assertion matched it and failed spuriously. This was usually masked by
our MaxAttempts=2 that we currently use for integration tests (it's
quite unlikely that the commit gets a hash beginning with "06" twice in
a row). However, we want to get to a state where we can set MaxAttempts
to 1, so make this more robust by changing our naming scheme.
Some tests assert that a specific commit subject does or doesn't occur
in the main view; interactive_rebase/outside_rebase_range_select.go is
an example for this, it asserts `t.Views().Main().Content(
DoesNotContain("commit 06"))`. The problem with this kind of assertion
and our test commit naming scheme is that the diff view begins with a
"commit <hash>" line, and when that hash happens to start with "06" the
assertion matched it and failed spuriously. This was usually masked by
our MaxAttempts=2 that we currently use for integration tests (it's
quite unlikely that the commit gets a hash beginning with "06" twice in
a row). However, we want to get to a state where we can set MaxAttempts
to 1, so make this more robust by changing our naming scheme.
refreshViewLinesIfNeeded re-wrapped every line of the buffer whenever
the view was tainted. That's cheap for short content, but scrolling a
long diff calls it constantly: adjustDownwardScrollAmount queries
ViewLinesHeight on every scroll event, and each newly-read line taints
the view, so every notch re-wrapped the entire buffer. Wrapping measures
each cell's width (uniseg) and allocates per line, so once you'd scrolled
far enough down the diff, scrolling turned sluggish - the cost grew with
how much had been read. (A CPU profile of scrolling deep in a long diff
put 77% of the time in lineWrap, reached almost entirely via
ViewLinesHeight rather than draw.)
Cache each line's wrapped result on the lineType, keyed by the width it
was wrapped at, and only re-wrap lines that have actually changed since
the last refresh. A firstDirtyLine index, updated in the same three
places that set `tainted` (write, clearViewLines' callers, SetHighlight),
marks the lowest line that might have changed; lines below it with a
matching cached width reuse their cached wrapping. The cache lives on the
line, so it's freed with the line when the view's content is replaced
(e.g. selecting a different commit) - it doesn't accumulate across a
session.
The wrapping cost per scroll now scales with the number of lines just
read, not with the total size of the buffer, so scrolling stays smooth
no matter how far down you are.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Reading more lines into a lazy-loaded view (e.g. a diff being scrolled)
never changes the window layout, and after the first screenful it
doesn't even change the visible content - the new lines land below the
viewport, so the only thing that changes on screen is the scrollbar
thumb. Yet each read triggered a full render: a layout pass plus a
redraw of every view. On a slow terminal that full-screen repaint on
every read is a big part of why scrolling through a not-yet-fully-read
diff stutters.
Route the task's refresh through a content-only render instead. It
skips the layout pass and only redraws the views whose content changed,
leaving tcell's cell-level dirty tracking to emit just the cells that
actually differ (in the steady state, the scrollbar column).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When scrolling a lazy-loaded view (a diff in the main view, the command
log, etc.), we top up the view's line buffer by reading more lines from
the still-running task. This was driven by asking the task to read a
fixed number of *additional* lines on every scroll event, which had two
problems:
- It was decoupled from the scroll position. Scrolling down, back up,
and down again re-read lines that had already been read, so the buffer
crept towards the end of the input regardless of where the user
actually scrolled.
- A single wheel notch only bought a single notch worth of runway, so
fast scrolling constantly outran the reader and had to wait for the
next read (and re-render) on every notch.
Make ReadLines take an absolute target total instead of a delta: the
task tracks how many lines it has read and only reads the shortfall, so
requests are idempotent. Callers now ask to fill the viewport at the
current scroll position plus a few screenfuls of read-ahead, which gives
scrolling enough runway to stay smooth.
The four call sites all wanted the same "fill this view" computation, so
consolidate them into a single ReadLinesToFillView helper.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
LogAction and LogCommand are called from git worker goroutines (every
command a worker runs logs itself, and controllers log an action before
kicking off their worker), where they set the Extras view's Autoscroll
flag and append to GuiLog while the UI thread reads both when it lays
out and draws the view. Bounce the writes onto the UI thread instead.
This doesn't fix any user-visible issue that I know of; labelling it as
"maintenance" rather than "bug" for that reason. It is one of many steps
that gets us closer to running our test suite with `-race`.
LogAction and LogCommand are called from git worker goroutines (every
command a worker runs logs itself, and controllers log an action before
kicking off their worker), where they set the Extras view's Autoscroll
flag and append to GuiLog while the UI thread reads both when it lays out
and draws the view. Bounce the writes onto the UI thread instead.
Use the background variant so the bounce doesn't count towards lazygit
being busy: writing the command log is incidental display work, and a
foreground task would let an in-flight log write refuse a concurrent repo
switch (the same reason view-buffer renders and toasts are backgrounded).
Ordering between successive log calls is preserved by the bounce FIFO.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
GetStatusString and HasStatus read the statuses slice without holding
the mutex that addStatus and removeStatus take when they mutate it. The
readers run on the spinner-render worker (which polls GetStatusString
every frame) while removeStatus fires from the waiting-status and
toast-expiry goroutines, so the unguarded reads race the concurrent
writes. Take the mutex in the readers too.
This doesn't fix any user-visible issue that I know of; labelling it as
"maintenance" rather than "bug" for that reason. It is one of many steps
that gets us closer to running our test suite with `-race`.
GetStatusString and HasStatus read the statuses slice without holding
the mutex that addStatus and removeStatus take when they mutate it. The
readers run on the spinner-render worker (which polls GetStatusString
every frame) while removeStatus fires from the waiting-status and
toast-expiry goroutines, so the unguarded reads race the concurrent
writes. Take the mutex in the readers too.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Refresh workers do their git work on background goroutines and then
mutate the model (`Model().Commits`, `.Branches`, …) and re-render views
directly from those goroutines, racing the UI thread's own cursor and
render code. This has been a long-standing source of flaky integration
tests, and it's what prevents us from running the e2e suite under the
race detector.
This PR removes that class of races by updating refresh state only on
the UI thread, and drops the mutexes that were standing in for that
discipline. It's an internal concurrency change with no intended
difference in normal use (the one small user-facing addition is noted at
the end).
- Each refresh scope does its git work on a worker, then enqueues its
model write onto the UI thread ("bouncing") through a single primitive,
so all model mutations are serialized on the one UI goroutine alongside
the cursor/render code they used to race.
- That primitive is generation-guarded: if you switch repos while a
refresh is in flight, the queued write is dropped instead of being
applied to the new repo.
- The inputs a refresh worker reads (model fields, selection, modes) are
now captured on the UI thread up front, so the worker computes from an
immutable snapshot. Worker-issued refreshes use a dedicated entry point,
and a debug-only assertion checks that the entry point matches the
calling goroutine.
- A few flags written from workers are made atomic rather than bounced.
- All six refresh mutexes are removed as redundant; the branches mutex
is replaced by a small branch-load sequence guard so the recency-sorted
result still wins at startup.
- Repo switching now runs on the UI thread rather than a worker,
removing a race on the shared gui state.
This is one step toward being able to run the test suite under `-race`
in CI — the remaining view-buffer rendering races are left for a
follow-up.
The one user-facing addition: switching repositories while a foreground
git operation is still running is now refused with a toast, instead of
running the operation's remaining commands against the newly-switched
repo.
The model-update bounces already drop themselves when the repo is
switched mid-refresh (onUIThreadUnlessRepoChanged), but three bounces
that touch the UI without writing the model did not: refreshView's
render, the staging-panel refresh, and the stale continue-rebase prompt
dismissal. All three ran unconditionally on the UI thread, so a
background refresh in flight across a repo switch could render the old
repo's data (through a context object belonging to the now-replaced
context tree), or pop the new repo's popup based on the old repo's
prompt state.
Route them through onUIThreadUnlessRepoChanged too, so they're dropped
alongside the model writes they accompany. This also fixes the dismiss
bounce using the raw foreground OnUIThread, which ignored the background
flag every other bounce in a background refresh respects.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Every refresh scope needs two ambient values to bounce its model and
view updates back to the UI thread safely: the background flag (which
picks the dispatch variant that doesn't count towards lazygit being
busy) and the repo generation that guards the bounce against a repo
switch. These were threaded separately — background as a parameter on
every refreshXxx function, generation re-read from the model inside each
one. Bundle them into a single refreshEnv passed through instead, so the
guard has a home to grow into (the next commit needs the generation in
refreshView, which currently has no access to it).
Capturing the generation once, at the start of the refresh, is also more
correct than the previous per-function re-read. The baseline should
reflect the repo whose inputs the refresh snapshotted (all captured up
front on the UI thread), not whenever each scope's worker happens to
wake. With the per-function read, a background refresh whose worker woke
after a repo switch would read the new generation and let its bounce
through, writing data computed from the old repo's inputs into the new
repo; capturing up front makes that bounce drop instead.
No behavior change for foreground refreshes, where the UI thread is held
for the whole refresh and the generation can't move under it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The commit's gpg onSuccess runs on a worker when the command output is
streamed, so its ClearPreservedCommitMessage wrote commit-message
context state off the UI thread. Bounce that write through OnUIThread.
GetFilePathSuggestionsFunc builds the trie on a worker (the slow
AllRepoFiles walk) and then assigned Model().FilesTrie and refreshed the
suggestions panel from there, racing the UI thread that reads the trie.
Keep the build on the worker but bounce just the model assignment and
the refresh through OnUIThread.
The discard handler cancelled the commit-files range selection from its
WithWaitingStatus worker. Bounce it through OnUIThread, keeping it after
the successful CheckMergeOrRebase as before.
The three branch-delete handlers and the two worktree-removal
continuations collapsed the Branches/RemoteBranches range selection from
their worker goroutine, racing the UI thread. Wrap each collapse in
OnUIThread, keeping it in the same spot relative to the refresh (FIFO
preserves the collapse-then-refresh order the name-restore depends on).
The pull-patch-into-new-commit handlers closed the commit-message panel
and, on success, pushed the local-commits context from inside the
WithWaitingStatus worker. Close the panel in OnConfirm before
dispatching (UI thread), and bounce the post-rebase context push through
OnUIThread, keeping it on the success path.
The three rebase-onto menu items read Modes().MarkedBaseCommit.GetHash()
(a bare string field) and, on success, cleared it via
ResetMarkedBaseCommit and pushed the commits context — all from the
WithWaitingStatus worker, racing the UI thread. Read the marked base
hash before dispatching, and bounce the post-rebase reset and context
push through OnUIThread, still guarded by the success check so they
don't run on the conflict path.
interactiveRebaseWithFlag and dropMergeCommit ran inside the
WithWaitingStatus worker but read Model().Commits and wrote the
selection (SetSelection(startIdx)) there, racing the UI thread. Thread
the commits slice in from each caller, and hoist the pre-rebase
selection into a UI-thread helper (selectRebaseResultCommit) called
before dispatching — squash/fixup unconditionally, drop only on the
non-merge path, matching the previous action guard.
ResetToRef ran on a worker and wrote the local-commits and reflog
selection directly (SetSelection(0) on both) before its refresh, racing
the UI thread. Fold those into the refresh's selection intents:
SelectHeadCommit for the commits (after a reset HEAD is the top commit,
and mid-interactive-rebase it correctly picks the real head over the
first todo entry) and SelectTopReflogCommit for the reflog. The
now-atomic SetLimitCommits stays where it is.
CheckoutRef and ResetToRef set this flag from their worker goroutine
(to load fewer commits for speed) while the commits refresh reads it on
the UI thread in captureCommitsState to decide how many to load — a data
race. Make it an atomic.Bool so those writes are safe where they are,
rather than routing the flag through a refresh intent. Precedent:
Branch.BehindBaseBranch.
discard reads Model().Commits and the selected commit index from its
WithWaitingStatus worker; read them in HandleConfirm instead.
toggleForPatch reads the commit-files ref name from the worker, and its
startPatchBuilder call reads the context's canRebase and diff range from
there too. Capture the ref name and run startPatchBuilder in
HandleConfirm before dispatching; PatchBuilder.Start only assigns
fields, so moving it off the worker changes no timing.
discard still collapses the range selection from the worker; that write
is a separate concern, left for a follow-up.
ResetSubmodule and fastForward each call a helper that reads the model
from inside their worker: FileForSubmodule reads Model().Files and
worktreeForBranch reads Model().Worktrees, racing the UI thread's model
writes. Hoist both lookups above the worker dispatch.
The two move helpers run inside the WithWaitingStatus worker that
withNewBranchNamePrompt dispatches to, but read Model().Files/Submodules
(to decide whether to auto-stash) and Model().Commits (the unpushed
commits to cherry-pick off the base branch) from there, racing the UI
thread's model writes. Compute mustStash — needed by both paths — at the
top, and the unpushed commits in the off-of-main menu item, on the UI
thread, and pass them into the helpers.
handleReword, amendTo, and the reset/set/add-co-author handlers pass
Model().Commits (and the selected line index) to a git rebase from
inside the WithWaitingStatus worker, racing the UI thread's model
writes. Read them on the UI thread before dispatching.
The author handlers index the full commit list by absolute start/end, so
the range sub-slice withItemsRange hands amendAttribute is not what they
need; capture the full Model().Commits there and thread it through.
These handlers dispatch their rebase to a worker via WithWaitingStatus
but read Model().Commits (and, for move-to-selected-commit, the selected
line index) from inside that worker, racing the UI thread's model
writes. Read them on the UI thread before dispatching and close over the
results.
getPatchCommitIndex stays as-is: moving its call out of the worker makes
its own Model().Commits read UI-thread-bound too, so the identical copy
in patch_building_controller.go needs no matching signature change.
The two pull-patch-into-new-commit handlers still push a context and
close the commit-message panel from the worker; those writes are a
separate concern, left for a follow-up.
With every scope's worker reads now captured on the UI thread and every
worker caller on RefreshFromWorker, the debug entry-point assertion no longer
needs to be scoped to the commits refresh. Move it to the top of
performRefresh so it guards every refresh regardless of which scopes it
touches, and drop the per-scope gate.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The remaining refresh scopes each still read model, context, and mode state
directly on their worker, racing the UI thread — the same class of race the
commits refresh had:
- files reads Model.Files (to detect resolved conflicts and drive the
auto-stage) and the Files context's ForceShowUntracked;
- reflog reads the existing reflog slices (for the incremental fetch),
Model.HashPool and the filtering path/author;
- branches reads Model.MainBranches and the previous branches (for the
BehindBaseBranch carry-over);
- stash reads the filtering path.
Gather each scope's inputs into an immutable snapshot on the UI thread (via
captureOnUIThread) before dispatching the git work, and have the refresh
compute from the snapshot — for branches, threaded through both the immediate
and the recency-sorted startup loads, which share one snapshot (the
BehindBaseBranch carry-over is identical either way). Status, tags and
worktrees read nothing UI-owned, so they're left alone.
For the snapshots to actually run on the UI thread, the worker callers that
reach these scopes must announce themselves: convert the submodule
operations, the submodule stash-and-reset, and the background files poller
to RefreshFromWorker.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
GuiRepoState.mergeOrRebaseStartedInLazygit and StartupStage are plain
fields, but they're written and read from worker goroutines: the former
from both the files refresh and the merge/rebase result path (which runs on
a worker for the async callers), the latter from the reflog/branches load as
it transitions the startup stage. Those are data races.
Make both atomic, like Branch.BehindBaseBranch. They're leaf flags, not
mutexes guarding model or view state, so an atomic is the natural fit and
keeps the merge/rebase result path out of this change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
These four refreshes each read model, context, and mode state directly on
their worker — the same class of race the commits refresh had:
- remotes reads the selected remote (Contexts().Remotes.GetSelected), needed
to keep the remote-branches selection valid;
- sub-commits reads the SubCommits ref/limit/divergence, the filtering
path/author, and Model.MainBranches/HashPool;
- commit-files reads the diff endpoints (CommitFiles from/to and the diffing
args);
- rebase-commits reads Model.HashPool/Commits.
Give each the same treatment as commits: gather its inputs into an
immutable snapshot on the UI thread (via captureOnUIThread, inline for a
UI-thread refresh, hopped for a worker one) before dispatching the git work,
and have the refresh compute from the snapshot. The commit-files re-init
inside the commits refresh captures its endpoints in the bounce, right after
ReInit sets them, before dispatching to the worker.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Now that every commits-reaching refresh issued from a worker goes through
RefreshFromWorker, guard the choice: in debug builds, panic if a refresh was
issued from the UI thread as RefreshFromWorker or from a worker as Refresh.
The caller's own goroutine is recorded at the top of performRefresh, before
a BLOCK_UI refresh dispatches onto the UI thread, so the check holds for
every mode rather than being fooled by BLOCK_UI. It's scoped to the commits
refresh for now, the only converted scope; once the rest are converted the
guard can move up to cover every refresh unconditionally.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
CheckMergeOrRebaseWithRefreshOptions refreshes after a merge/rebase step,
and until now always via the UI-thread Refresh. Most of its callers are on a
worker (the WithWaitingStatus/WithInlineStatus merge, squash-merge, rebase,
pull, amend, drop, and patch-move handlers), so that refresh reads the
commits scope off the UI thread — the race the previous commit addresses for
everything else.
Split it: the default is for worker callers and refreshes via
RefreshFromWorker; a new CheckMergeOrRebaseWithRefreshOptionsFromUIThread is
for the handlers that run the step synchronously on the UI thread
(WithWaitingStatusSync, kept sync so rapid key presses batch): move up/down,
revert, squash-fixups, cherry-pick paste, and patch-discard.
The two share a private impl carrying which thread the caller is on, and the
auto-skip recursion (genericMergeCommandImpl for an empty commit) threads it
through so the follow-up step refreshes on the same thread. The
merge-and-commit refresh in SquashMergeCommitted, also on a worker, moves to
RefreshFromWorker to match.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A commits refresh does its git work on a worker and then reads the model,
the contexts, and the modes for that work directly from there:
LocalCommits.GetSelectionRangeAndMode/GetLimitCommits/GetShowWholeGitGraph,
Model.Commits/MainBranches/HashPool, the filtering path/author. Those are
owned by the UI thread, which is concurrently running the cursor and render
code, so the reads race it — the dominant, confirmed source of the
commits-scope flakes (the startup ClampSelection vs GetSelectionRangeAndMode
race, for one).
Gather them into an immutable capturedCommitState on the UI thread, before
the git work is dispatched, and have refreshCommitsWithLimit compute from
that snapshot. UI-thread callers capture inline; worker callers can't (a
SYNC/BLOCK_UI refresh parks the UI thread at wg.Wait, so hopping from a
scope sub-worker would deadlock), so the capture is lifted out of the scope
worker into the refresh orchestration, and worker callers announce
themselves with a new RefreshFromWorker entry point that hops the capture to
the UI thread and blocks for it (OnUIThreadAndWait). BLOCK_UI runs the whole
refresh on the UI thread regardless of the caller, so it captures inline
too.
Every refresh issued from a worker that reaches the commits (or branches,
which pulls in commits) scope is converted: the fast-forward, branch/tag
delete, worktree remove/detach, push, reword-via-rebase, author edits,
custom-command, hard-reset-with-autostash, reset-to-ref, fetch-and-checkout,
gpg-stream, post-fetch, and external-change-poller refreshes, plus the
branch checkout and move-commits-to-new-branch refreshes.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The next commits move refresh workers to read UI-thread-owned state (the
model, contexts, selection) on the UI thread rather than off it. Two
primitives support that:
- OnUIThreadAndWait runs a function on the main event loop and blocks the
caller until it has run, so a worker can read that state without racing.
OnUIThreadAndWaitBackground is the same for background routines, whose
work must not count towards the program being busy.
- IsUIThread reports whether the caller is on the main event loop, for a
debug-only assertion that a refresh was issued from the thread it claims.
It records the main loop's goroutine id in MainLoop and compares via
goid, so it's promoted from an indirect to a direct dependency.
goid is used only by that debug assertion, never to drive production
control flow.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The PR fetch needs the current branches (for their upstreams) and
remotes to know what to query. It read them from Model().Branches /
Model().Remotes on its own worker, after waiting on branchesAndRemotesWg
for the branches and remotes refreshes to finish.
That wait no longer guarantees fresh data: those refreshes now write the
model in a bounce onto the UI thread, and Done() fires before the bounce
has been processed. So the fetch read the pre-refresh lists — most
visibly, checking out a branch that has a PR wouldn't show that PR until
the next refresh, because the fetch queried the old branch set.
Have refreshBranches / refreshReflogAndBranches / refreshRemotes return
what they loaded, stash it in locals in Refresh, and hand it to the
fetch. The wait on branchesAndRemotesWg orders the fetch after both
loads have stored their slices, so it fetches against exactly the
branches and remotes that were just loaded, with no model read on the
worker. The previous commit guarantees both are always in scope when
pull requests are, so no fallback is needed.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The pull-request fetch queries GitHub for the tracking branches'
upstreams against the configured remotes. It therefore depends on the
branches and remotes being up to date; a refresh that asks for pull
requests but not for those (e.g. checking out a branch) would fetch
against a stale branch/remote list — for instance missing the PR of the
branch just checked out.
Expand the scope so pull requests always co-refresh branches and
remotes. This also sets up the next commit to hand the freshly-loaded
branches and remotes straight to the fetch, instead of reading them
back from the model (which, now that those writes are bounced onto the
UI thread, would be stale on the worker).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
CommitFileTreeViewModel embedded the low-level tree's SetTree, which
rebuilds the node list without touching the cursor. So after a shrinking
rebuild (e.g. moving a patch out into the index removes a file), the
selection index could be left past the end of the tree. GetSelectedItems
then indexes out of range and returns a nil node, which segfaults callers
such as canEditFiles when the options map is rendered during layout.
Override SetTree to ClampSelection after the rebuild. Unlike
FileTreeViewModel we deliberately don't also re-find the selected node by
path: that walk lands on the containing directory when a file is removed
from a dir that then collapses, whereas keeping the clamped index lands
on the sibling file (see discard_old_file_changes).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Operations that check something out (checkout, create branch, move
commits to a new branch, fetch-and-checkout) selected the newly
checked-out branch by calling SelectFirstBranchAndFirstCommit() before
the refresh and passing KeepBranchSelectionIndex so the refresh wouldn't
override it. That set the selection directly, usually from a worker
goroutine (WithWaitingStatus/WithInlineStatus). Now that the refresh's
own selection write is bounced onto the UI thread, the two writes could
land in either order, and under load the refresh's "restore the
previously-selected branch" write would win — leaving the old branch
selected instead of the new one (flaky
move_commits_to_new_branch_from_base_branch).
Replace it with declarative selection intents applied inside the
refresh's own bounce, so the selection is set on the UI thread and
atomically with the list write (no off-thread write, and no BLOCK_UI
needed to avoid a flicker):
- BranchSelection: SelectCheckedOutBranch selects the checked-out branch
(top of the list). The default, KeepBranchSelectionByName, restores
the previously-selected branch by name as before. This replaces the
KeepBranchSelectionIndex bool.
- CommitSelection: SelectHeadCommit (already existed) for the commit.
- SelectTopReflogCommit selects the top reflog entry, since a checkout
adds a new entry there (reflog/checkout relies on this).
SelectFirstBranchAndFirstCommit is gone. The previously-selected branch
is now read at the top of the branches bounce, before the list is
overwritten, so that read moves onto the UI thread too.
fetchAndCheckout's refresh changes from ASYNC to SYNC so its
post-refresh focus switch can run in Then on the UI thread; SYNC keeps
the inline fetch spinner spinning (only BLOCK_UI would freeze it).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A toast keeps a foreground spinner task alive for its whole lifetime
(~2-4s): showing one calls renderAppStatus, whose OnWorker loop runs
until the status string clears. With the repo-switch guard in place that
made the guard's own "can't switch, operation in progress" toast keep
Busy() true, so the next escape/switch was refused until the toast
faded — you had to wait it out.
Render toasts in the background, like view-buffer content: a toast is a
transient notification, not lazygit driving an operation, so a switch
during one is fine. A real operation that shows a toast still keeps its
own foreground task busy independently.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Switching repos reassigns gui.git and the process cwd; doing it while a
foreground git operation (rebase/commit/push/…) is mid-flight would run
that operation's remaining commands against the wrong repo. The same
applies while the refresh an operation triggers is still settling: its
model writes are generation-guarded, but the client-side Then/OnUIThread
callbacks that run after it aren't, and shouldn't run against a repo that
changed underneath them.
Refuse the switch (with a toast) whenever gocui reports a busy foreground
task. DispatchSwitchTo carries the guard for the simple callers. The
callers that do work before the switch check up front instead, so a
refused switch doesn't leave that work half-done: worktree creation
checks before creating (its own waiting-status spinner would otherwise
make the query busy and refuse its own switch); submodule-enter and the
recent-repos menu check before mutating the repo-path stack (pushing /
clearing it); and escape-to-parent (SwitchToParentRepo) checks before
popping it, so a refusal doesn't consume the entry and strand the user
with nowhere to escape back to. All then call the unguarded switchTo,
which is safe because their own operation is complete by then.
The repo-switch busy query must not count view-buffer content rendering:
those tasks paint a view rather than drive a git operation, so leaving
one running across a switch is harmless (the switch's own refresh
re-renders). More importantly, they fire on nearly every focus/selection
change — including the context activation that runs right before a
menu/prompt confirmation handler (e.g. confirming worktree creation).
A synchronous busy check in such a handler would otherwise see that
render and make the very switch the handler is about to request refuse
itself.
Route ViewBufferManager's tasks through a new gocui NewBackgroundTask so
they're tracked for idle detection but excluded from the busy query. The
task "background" flag now covers two kinds of non-blocking work: the
background routines (and their refreshes) tagged earlier, and view
rendering.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
For the busy query to be usable as a repo-switch guard it has to be
false while the ongoing background routines run, or a switch would be
refused every time a background fetch or files refresh happened to be in
flight. Mark that work as background so it's excluded from the query.
The background routine dispatch in goEvery becomes OnWorkerBackground,
and the auto-fetch waiting status renders its spinner through the
background variants. Within a refresh, the background flag (which
Refresh already carries as options.Background, and which the files path
already threaded) is now threaded through every place that enqueues a
task: the async scope workers, the model-write bounces
(onUIThreadUnlessRepoChanged), refreshView, the staging bounce, the
Then dispatch, and the branch-loader's behind-count worker. Two
single-caller chains reached by a background files refresh get the flag
too: MergeConflictsHelper.EscapeMerge and BranchesHelper.
AutoForwardBranches (whose follow-up refresh must stay background when
triggered by the background fetch).
Nothing gates on the busy query yet, so this is behavior-preserving;
background tasks still count as busy for the test idle-listener, which
looks at every task regardless of the background flag.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Repo-switch safety needs to answer, synchronously on the UI thread,
"is any foreground work in flight right now?" so it can refuse a switch
that would run against a repo about to be swapped out. gocui already
tracks a task per OnWorker/Update for the test idle-listener; extend
that.
Tasks gain a background flag: background tasks (the ongoing routines
like auto-fetch, and the refreshes they trigger) don't count towards
busy, because their model writes are already guarded against a
concurrent switch by the repo generation. Add OnWorkerBackground,
UpdateBackground and UpdateContentOnlyBackground (plus the gui-layer
OnUIThreadBackground / OnUIThreadContentOnlyBackground / OnWorkerBackground
on IGuiCommon) so the few background call sites can opt in without
touching the hundreds of foreground callers.
TaskManager.hasBusyForegroundTaskExcept answers the query; Gui.Busy()
wraps it, excluding the event currently being processed (recorded as
currentTask) so a handler asking the question doesn't count itself.
Nothing gates on Busy() yet; this is the mechanism only.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
DispatchSwitchTo wrapped its whole body in WithWaitingStatus, so the
switch ran on a worker: it chdirs, reassigns gui.git, and swaps gui.State
(in resetState), all of which the UI thread also reads. The generation
guard prevents the refresh-in-flight logical corruption but not this
pointer data race on gui.State.
Run the switch synchronously on the UI thread instead. Every caller is
already a UI-thread handler except NewWorktreeCheckout, which must create
the worktree (git work) on a worker first; it now dispatches only the
switch via OnUIThread. The heavy data loading still happens
asynchronously via the refresh that onNewRepo triggers, so the
synchronous part is small (a couple of git rev-parse plus direnv).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This removes the last refresh mutex. RefreshingBranchesMutex wasn't
guarding a data race (Branch.BehindBaseBranch is atomic, and every model
write is now bounced onto the UI thread); it was serializing the two
branch loads that race at the INITIAL startup stage — an immediate one
sorted without the reflog, and an async one that loads the reflog and
sorts by recency — so that the recency-sorted write landed last and won.
That serialization was never a real guarantee, only "very likely": it
relied on the immediate load acquiring the lock before the async load,
which had to load the reflog first.
Instead, each branch load takes a monotonically increasing sequence
number, and its bounce drops the write if a later-started load has
already applied. Combined with the preceding commit (immediate load runs
before the async one is spawned), this is an actual guarantee: the
immediate non-recency load always has a lower sequence than its recency
async partner, so the highest sequence number is always held by a
recency-sorted load, and highest-wins converges on recency ordering —
even if more refreshes fire during the INITIAL window, since each
refresh's async out-sequences its own immediate.
The guard also subsumes what the mutex gave post-startup: a slow, stale
refresh's bounce can no longer clobber a newer refresh's branches.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
At the INITIAL startup stage two branch refreshes happen: an immediate
one sorted by whatever reflog we have (empty, so not by recency), and an
async one that loads the reflog first and re-sorts by recency. Until now
the async one was spawned first and the immediate one ran afterwards;
this inverts that so the immediate refresh runs before the async one is
spawned.
With RefreshingBranchesMutex still in place this is behavior-preserving
(the mutex serializes the two either way). It's a preparatory step for
replacing that mutex with a branch-load sequence guard: running the
immediate refresh first establishes a happens-before relation between
the two loads' sequence numbers, so the recency-sorted one is guaranteed
the higher sequence.
This also lets refreshReflogCommitsConsideringStartup fold into
refreshReflogAndBranches, whose two-phase logic is now all in one place.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Now that every refresh scope writes its model updates on the UI thread
via onUIThreadUnlessRepoChanged, the per-scope mutexes that used to
serialize concurrent worker-goroutine access are redundant:
Model().Commits, .SubCommits, .Authors, the status view content, and
.PullRequests/.PullRequestsMap are all now written only on the UI
thread, and their readers already ran there. setSubCommits only existed
to take the lock, so it's inlined to match refreshSubCommitsWithLimit,
which writes Model().SubCommits directly.
The worker phases still *read* some of these fields (the commit
selection range, MergeRebasingCommits), but those reads race a
concurrent refresh's bounced write regardless of the mutex — the write
happens in the bounce, outside the locked region — so the mutex never
protected them. That residual read race belongs to the broader -race
effort, not to these locks.
RefreshingBranchesMutex is deliberately kept. It is load-bearing for a
reason unrelated to data races: at the INITIAL startup stage two
refreshBranches run concurrently — an immediate one with an empty
reflog (non-recency order) and an async one with the freshly-loaded
reflog (recency order). The mutex serializes them so the recency write's
bounce is enqueued last and wins. Without it the stale non-recency write
can land last, reordering the branches list (caught by the recency-sort
e2e tests: cherry_pick/*, branch/rebase_*).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
refreshBranches now loads the branches (and worktrees) on the worker and
writes Model.Branches, the pull-requests map, Model.Worktrees, and the
restored branch selection in an onUIThreadUnlessRepoChanged bounce. The
selection restore and rebuildPullRequestsMap run in the bounce so they
see the branches we just wrote; the LocalCommits re-render (for branch
head visualization) moves into the same bounce.
refreshStatus is adjusted to read the checked-out branch and the linked
worktree name inside its bounce rather than on the worker: both derive
from models (Branches, Worktrees) that are now written via bounces, so
reading them on the worker would format the status from stale values —
which showed up as the status line dropping the "(worktree)" suffix right
after entering a submodule or switching worktrees. The git work
(WorkingTreeState) stays on the worker.
Two callers that read the branches model right after a SYNC branches
refresh move their reads into Then:
- BranchesHelper.PostFetchRefresh: AutoForwardBranches reads Model.Branches,
so it runs in Then (preserving that a fetch error is still returned to
the caller and that background auto-forward errors aren't surfaced as a
popup).
- BranchesController rename: the re-select-by-name loop runs in Then.
RefreshingBranchesMutex is left in place for the mutex cleanup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshCommitsWithLimit now loads the commits, working-tree state and
bisect info on the worker and writes them all — Model.Commits,
Model.BisectInfo, Model.WorkingTreeStateAtLastCommitRefresh,
Model.CheckedOutBranch, the authors, and the restored commit selection —
in a single onUIThreadUnlessRepoChanged bounce. The selection restore
(SelectHeadCommit / KeepCommitSelectionByHash) has to run in the bounce
because it reads the freshly-loaded commits; the FocusLine scroll is
enqueued from within the bounce so it still runs after refreshView's
re-render, as before.
refForLog no longer writes Model.BisectInfo as a side effect; it returns
the bisect info it read, and the bounce writes it, keeping that model
write on the UI thread. No caller reads Model.BisectInfo synchronously
after a refresh (the bisect controller reads Git().Bisect.GetInfo()
directly), so this is safe.
refreshCommitsAndCommitFiles's post-refresh re-init of the commit files
context depends on that restored selection, so it reads the selection in
a bounce and dispatches the commit-files git work back to a worker.
LocalCommitsMutex / AuthorsMutex are left in place for the mutex cleanup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshGithubPullRequests and setGithubPullRequests now do their network
work on the worker and write Model.PullRequests / PullRequestsMap in an
onUIThreadUnlessRepoChanged bounce (the "no github remotes" and "no base
remote" early-returns clear them the same way). rebuildPullRequestsMap
moves into the bounce so the map is built from Model.Branches and
Model.Remotes as they stand on the UI thread — after those scopes'
refreshes have applied their own bounces — rather than from whatever the
worker happened to see.
The remaining worker-side reads of Model.Branches (to pick which upstream
branches to query) are the same not-yet-addressed worker-read race that
applies to the other bounced scopes.
RefreshingPullRequestsMutex is left in place for the mutex cleanup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshStatus computes the status line on the calling goroutine (as
before) but now writes it to the status view in an
onUIThreadUnlessRepoChanged bounce rather than calling SetViewContent
directly from the worker. RefreshingStatusMutex is left in place for now;
it only guards the compute phase between concurrent callers and comes out
in the mutex cleanup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshReflogCommits now does the git fetch on the worker and computes
the new ReflogCommits / FilteredReflogCommits values (still reading the
existing slices for the incremental prepend), then writes them in an
onUIThreadUnlessRepoChanged bounce. The freshly-computed reflog is still
returned for the branches load, so recency sorting is unaffected by the
write now landing on the UI thread (see the previous commit).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
BranchLoader.Load reads the reflog commits to sort branches by recency.
Today it reads them straight from Model.ReflogCommits, which works
because in the recency path the reflog refresh writes that field
synchronously just before the branches refresh reads it (same goroutine,
sequential).
An upcoming commit bounces the reflog model write onto the UI thread, at
which point Model.ReflogCommits wouldn't be updated yet when branches
runs — branches would sort by the previous refresh's reflog. To decouple
the branches load from *when* that write lands, pass the reflog commits
to refreshBranches explicitly: refreshReflogCommits now returns the
commits it loaded, and the recency path hands them straight to
refreshBranches. The non-recency path (branches and reflog run
concurrently, as before) keeps passing Model.ReflogCommits.
Pure refactor: behavior is identical, since the value passed is exactly
what Load read from the model before.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshRemotes now loads the remotes on the worker and writes
Model.Remotes, rebuilds the pull-requests map, and updates the selected
remote's RemoteBranches inside an onUIThreadUnlessRepoChanged bounce.
RemotesController.addAndCheckoutRemote read Model.Remotes right after its
SYNC REMOTES refresh to select the newly-added remote; since that write
now bounces, the selection (and the follow-up fetch) move into Then so
they run against the post-refresh model rather than the stale one.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshSubCommitsWithLimit now loads the sub-commits on the worker and
writes Model.SubCommits (and folds their authors into Model.Authors via
RefreshAuthors) inside an onUIThreadUnlessRepoChanged bounce.
SubCommitsMutex and AuthorsMutex are left in place: the former is shared
with setSubCommits, the latter with the commits refresh's RefreshAuthors
call, so both come out only once those other writers are on the UI thread
too.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshRebaseCommits now computes the merged rebasing commits and working
tree state on the worker and writes Model.Commits /
WorkingTreeStateAtLastCommitRefresh in an onUIThreadUnlessRepoChanged
bounce. LocalCommitsMutex is left in place for now; it's shared with the
commits and branches refreshes and comes out once they're all bounced.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshWorktrees now writes Model.Worktrees in an
onUIThreadUnlessRepoChanged bounce. loadWorktrees becomes a pure loader
that returns the worktrees instead of writing them, since it's shared
with refreshBranches; refreshWorktrees bounces the result, and the
branches call site writes it directly for now (that write moves into
refreshBranches's own bounce when that scope is migrated).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshStashEntries now loads the stash entries on the worker and writes
Model.StashEntries in an onUIThreadUnlessRepoChanged bounce.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshTags now captures the repo generation, loads the tags on the
worker, and writes Model.Tags in an onUIThreadUnlessRepoChanged bounce
rather than directly from the worker goroutine.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshCommitFilesContext now enqueues the Model.CommitFiles write and
CommitFileTreeViewModel.SetTree() call via OnUIThread, instead of running
them directly on the worker goroutine that drives async refreshes. This is
what makes moving SwitchToDiffFilesController's post-refresh work into Then
(previous commit) actually necessary, rather than just future-proofing.
Same repo-switch hazard as the FILES bounce, closed the same way: it
captures the repo generation before the git work and bounces through
onUIThreadUnlessRepoChanged, so the write is dropped if the user switched
repos while it was in flight.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
SwitchToDiffFilesController.enter calls SelectPath and Context.Push
right after a (SYNC, by default) COMMIT_FILES refresh. This works today
because the model write currently happens synchronously in the worker
before Refresh's wg.Wait() returns, but an upcoming commit will bounce
that write onto the UI thread instead, at which point wg.Wait() no
longer guarantees it's been applied, and SelectPath would operate on a
stale tree.
Move both calls into Then ahead of that change, for the same reason as
the earlier FILES-scope commit: Then is already queued via OnUIThread,
so this is behavior-preserving on its own.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
FileTreeViewModel.RWMutex is removed along with the
withFileTreeViewModelMutex wrapper in FilesController that RLocked it:
every writer (the bounce closure, previous commit) and every reader (key
handlers, disabled-reason callbacks) now runs on the UI thread, so the
mutex is redundant.
RefreshingFilesMutex is removed entirely, including its last use in
repos_helper's DispatchSwitchTo. That use predates the bounce and was
never about FilesController's optimistic-rendering concern; it serialized
a repo switch's onNewRepo() against an in-flight FILES refresh for the
repo being switched away from, so that a slow refresh from the old repo
couldn't write into the freshly-reset model for the new one. Bouncing the
write already broke that guarantee on its own terms — the mutex's critical
section never covered the bounced closure's actual execution, only the
(now-removed) code that enqueued it — so by this point it was only still
locked here without protecting anything real; the previous commit's
repo-generation guard is what now actually closes that race, making this
lock fully redundant rather than just relocated.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshStateFiles now does its git work on the worker and enqueues a
single OnUIThread closure that writes Model.Submodules, Model.Files, and
the FileTreeViewModel state together, instead of writing them directly
from the worker goroutine. refreshStateSubmoduleConfigs becomes a pure
getter (returns the configs; no model write) so the result can be
threaded into that same bounce.
The STAGING handler wraps RefreshStagingPanel in OnUIThread after
fileWg.Wait() so it sees the post-bounce file model rather than the stale
pre-refresh one — without this it would race the files bounce queued just
above it.
Bouncing the write opens a hazard the old synchronous write didn't have:
if the user switches repos while this refresh is in flight, the queued
closure would fire after resetState has replaced the model with a fresh
one for the new repo, silently overwriting it with the previous repo's
files. Guard against this with a repo generation: resetState bumps a
counter on every switch, refreshStateFiles captures it before its git
work, and onUIThreadUnlessRepoChanged drops the bounce if the generation
has moved on. This one helper is the general mechanism the remaining
scopes' bounces will use too; the same guard covers the rebase-continue
prompt, which reads Model.Files right after.
A generation counter, not a comparison of the *Model pointer: switching
away from and back to a repo reuses that repo's cached state (the same
Model pointer), which a pointer comparison would wrongly accept even
though the in-flight data is stale.
PromptToContinueRebase's Then callback (previous commit) now gets an
explanatory comment, since this is the commit that makes it necessary.
The explicit locking around these writes (RefreshingFilesMutex in
refreshFilesAndSubmodules, FileTreeViewModel.RWMutex around the write in
refreshStateFiles) is left in place for now even though it's becoming
redundant, to keep this commit focused on the bounce itself; it's removed
next.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
PromptToContinueRebase and WithEnsureCommittableFiles both read
Model.Files right after a SYNC FILES refresh. This works today because
the model write currently happens synchronously in the worker before
Refresh's wg.Wait() returns, but an upcoming commit will bounce that
write onto the UI thread instead, at which point wg.Wait() no longer
guarantees it's been applied.
Move both reads into Then ahead of that change. Then is already queued
via OnUIThread (previous commit), so this is a behavior-preserving
refactor on its own: the model is fully written by the time Then runs
either way, whether that write is still synchronous or gets bounced
later.
As part of restructuring WithEnsureCommittableFiles, prepareFilesForCommit
and syncRefresh are inlined into their single call sites.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
This is preparation for upcoming commits that will bounce refresh-scope
model updates (e.g. Model.Files) onto the UI thread by enqueuing the
write via OnUIThread instead of applying it directly on the worker
goroutine. Once that lands, a Then callback that reads the model must
run after that queued write has been processed, not synchronously at
wg.Wait() time — at that point the workers have returned, but a bounce
they queued may not have been processed yet.
Queuing Then via OnUIThread here, ahead of that change, guarantees the
right ordering once it lands: a bounce queued earlier in the same
refresh is already sitting in the channel by the time wg.Wait()
returns, so Then enqueued after it will always be processed after, and
see the post-refresh model.
The signature change to func() error lets Then propagate errors
through gocui's normal error handler (the same path key-handler errors
take).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
GetIsRefreshingFiles() is never called anywhere in the codebase, so the
flag serves no purpose. Remove it from Gui, StateAccessor, and
IStateAccessor, and drop the two SetIsRefreshingFiles calls in
refreshFilesAndSubmodules that maintained it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Operations that show an inline status next to the item they operate on
("Pushing", "Fast-forwarding", "Fetching", …) would sometimes fail to
remove this inline status when done.
Fixes#5534.
Pushing a tag triggers no refresh, so it used to redraw the tags view
by hand to remove the "Pushing" inline status. WithInlineStatus now
always re-renders after clearing the operation, so this is redundant.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Operations that show an inline status ("Pushing", "Fast-forwarding",
"Fetching", …) removed it by relying on the async refresh they trigger
to redraw the view after the item operation had been cleared. That
ordering was never guaranteed: the item operation is cleared on the
worker once the operation's function returns, while the refresh redraws
the item from the UI thread whenever its (asynchronous) git work
happens to finish. If the refresh redrew before the clear, the status
was left on screen with no later redraw to remove it, so the branch (or
tag/remote) stayed stuck showing e.g. "Pushing" indefinitely even though
the operation had completed. This is timing-dependent, which is why it
surfaced as rare, hard-to-reproduce reports and as flaky CI failures.
Fix it by re-rendering in stop() right after clearing the operation,
and by making these refreshes synchronous rather than async. Because a
synchronous refresh has already updated the model and queued its own
redraw by the time stop() runs, and UI-thread callbacks run in order,
the redraw we queue here runs last and draws the up-to-date model with
the status removed. An async refresh couldn't give that guarantee: its
model update might not have landed yet, so the redraw could briefly
flash the pre-operation status.
Pull refreshes through the shared CheckMergeOrRebaseAndSelectHeadCommit,
so that helper becomes synchronous too; its only other caller,
RegularMerge, thereby also refreshes synchronously, which is fine: a
synchronous on-worker refresh is what we want anyway.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Some operations used to freeze lazygit while they ran, with no sign that
anything was happening — the UI would just lock up until they finished.
This affected:
- Merging a branch (including squash merges)
- Rebasing a branch interactively onto another ref
- Setting a commit to "edit"
- Resetting to a commit, branch, or tag
- Continuing, skipping, or aborting a merge or rebase
Many of these were usually fast under normal conditions (e.g. a hard
reset when the head doesn't change, or a "rebase --continue" when
there's only a handful of commits left), but in some cases they could
take long (e.g. a hard reset to some distant commit where lots of files
changed). Now each of these shows a spinner while it works and keeps the
UI responsive, matching how similar operations already behave.
Resetting to a commit/branch/tag from the reset menu ran inline on the UI
thread with no spinner; a hard reset to a distant commit can take a while
and blocks the UI meanwhile. Run it on a worker with a waiting status. The
undo/redo callers of ResetToRef already wrap it this way.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Setting a single commit to "edit" ran the interactive rebase inline on the
UI thread with no spinner, while its sibling startInteractiveRebaseWithEdit
(used when editing multiple commits or quick-starting a rebase) already runs
on a worker with a waiting status. Make the direct path match.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The interactive-rebase item in the rebase-onto-ref menu ran inline on the UI
thread with no spinner, unlike its two siblings in the same menu (simple
rebase and rebase onto base branch), which already run on a worker with a
waiting status. Make it consistent.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The regular and squash merges from the merge menu ran inline on the UI
thread, freezing it with no spinner while git worked. Run them on a worker
with a waiting status, like the rebase entry points already do.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Continuing, skipping, or aborting a merge/rebase from the options menu ran
the git command inline on the UI thread, freezing the UI with no spinner
while it worked (a continue can replay many commits). Run the
non-subprocess path on a worker with a waiting status instead, matching how
the other merge/rebase entry points already behave.
The auto-skip recursion in CheckMergeOrRebaseWithRefreshOptions must not
start its own worker: it already runs on the caller's thread (the worker of
the enclosing waiting status, or the UI thread for the synchronous callers).
Route it through genericMergeCommandImpl with the waiting status suppressed
so its behavior is unchanged.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When showing the files of a commit, we used to display renamed files as
a pair of added and deleted files, rather than a single `R` entry. This
is inconvenient when just browsing the commit's files because you can't
see if the rename also has modifications; but it becomes a real problem
when trying to work with the renamed file in a custom patch if it also
had modifications; there was no way to discard them, for example.
The Files panel already shows renamed files as `R` and allows you to
stage/unstage/discard hunks in them, so there's no reason why the patch
building panel shouldn't allow the same; and this PR adds this.
To drop just the modifications of a rename, add the individual hunks to
the custom patch (the side panel shows a `◐` icon); reverting the patch
then only drops the modifications but not the rename. To also drop the
rename, add the entire `R` file to the custom patch from the side panel
(it gets a `●` icon).
When loading the files of a commit we passed --no-renames, so a rename
showed up as a separate delete and add rather than a single R entry.
That made it impossible to work with a rename that also modifies the
file: the modifications were spread across a full deletion and a full
addition instead of appearing as the handful of lines that actually
changed. The staging view already shows renames and lets you stage
their hunks, so there was no good reason for the patch builder to
differ; the flag was only there because the commit-file parser couldn't
cope with the rename record format.
Switch the commit-file loader and the per-file diff to --find-renames,
teach the parser about the rename record (a status followed by two
paths), and carry the previous path through the patch builder so the
diff for a rename is loaded with both paths, which is what makes git
emit the rename in the first place.
A whole-file selection keeps the rename in the header, so the rename
moves or is discarded together with the file's contents. A partial
selection instead strips the rename metadata and points the header at
the new path, so applying the patch only changes the contents and
leaves the rename in place; the blob index line is kept so that a 3-way
apply can still fall back to a blob merge.
Discarding a renamed file from a commit now discards both the new and
the old path, so the new file is removed and the old one is restored.
Changing the rename similarity threshold refreshes the commit files
panel too, not just the files panel, so that a rename can turn into a
delete and add or back. It is disabled while building a patch, however,
because the patch builder caches each file's diff by path and would
desync if a rename changed into a delete and add underneath it.
Finally, copying a file's diff from the commit files panel now passes
both paths for a rename, so the copied diff shows the rename instead of
a new-file add.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
In many cases some of the side panels show a lot of empty space; for
example the branches panel when there is only a `main` branch. This gets
worse when `expandFocusedSidePanel` is on (accordion mode), in which
case the almost-empty panel gets even bigger when focused and steals
valuable space from the other panels that do have something to show.
This PR adds a new `gui.shrinkSidePanelsToContent` option which causes
side panels to never show more than their content (plus one blank line,
so it's clear there's nothing more below). This means that panel heights
are now dynamic and may change as their content changes; for example,
when the working tree is clean the Files panel shows only two blank
lines, but as you start changing file, it gets taller to show them.
The option is off by default because it takes some getting used to. It
is also independent of the `expandFocusedSidePanel` option; that one
just makes the effect even more pronounced.
Accordion mode expands the focused side panel, but when that panel has
little content (an empty Files panel, a Branches panel with only master)
it just fills the extra height with blank space. The same waste happens
for any panel that gets more height than it has content to show.
When this option is enabled, each side panel is sized to its own content
(plus a blank line, so it's clear there's nothing more below) rather than
to an equal share of the height. The height a small panel gives up flows
to the panels that have more content than fits; those grow up to their
content and then scroll, weighted toward the focused panel in accordion
mode so the two features compose. Only when every panel fits with room to
spare is the leftover shared out equally, regardless of focus: enlarging
the focused panel there would reveal no more content and would only make
the panels jump around as the focus moves.
The option is independent of expandFocusedSidePanel and off by default.
The status panel, and the stash panel when unfocused, keep their fixed
one-line height as before.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The height thresholds that decide between the proportional layout and
the squashed layout (and, within the squashed layout, between 3-row and
1-row unfocused panels) were hard-coded constants tuned for the fixed
set of five side panels. Now that the panels are configurable, a layout
with fewer panels has less to fit, yet was still forced into the
squashed layout at the same height as five panels would be.
Scale the thresholds down in proportion to the panel count so a smaller
layout keeps using the proportional layout at smaller heights. Only ever
scale down: raising the thresholds for more panels would make them
squash sooner, which works against the reason someone adds panels in the
first place (they want to see them).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A handful of default keybindings differ by platform (e.g. word-wise
cursor movement in text inputs uses alt on macOS but ctrl elsewhere).
Lazygit chooses these based on the OS it runs on, but that's the wrong
signal when the OS isn't where the user is actually typing: someone
running lazygit in a Linux container that they access over ssh from a
Mac gets the Linux bindings, when they'd rather have the Mac ones.
Remapping each binding by hand via config is tedious, so add a single
LAZYGIT_KEYBINDING_PLATFORM override.
Closes#5668.
A handful of default keybindings differ by platform (e.g. word-wise
cursor movement in text inputs uses alt on macOS but ctrl elsewhere).
Lazygit chooses these based on the OS it runs on, but that's the wrong
signal when the OS isn't where the user is actually typing: someone
running lazygit in a Linux container that they access over ssh from a
Mac gets the Linux bindings, when they'd rather have the Mac ones.
Remapping each binding by hand via config is tedious, so add a single
LAZYGIT_KEYBINDING_PLATFORM override.
An unrecognized value falls back to the real OS rather than to the
non-darwin default bindings, since the latter would be an arbitrary
choice.
This PR improves three rough edges around deleting worktrees and the
branches checked out in them:
- **Deleting a branch that's checked out in another worktree now
actually deletes the branch.** The menu used to offer to remove or
detach the worktree but then stop there, leaving behind the very branch
you asked to delete. Both actions now delete the branch afterwards, and
the labels say so ("Remove worktree and delete branch" / "Detach
worktree and delete branch"). The old "Switch to worktree" entry is
dropped — it's not a useful option in the context of deleting a branch.
- **A branch's local branch, remote branch, and worktree can be deleted
in one step.** Picking "Delete local and remote branch" for a single
branch that's checked out in another worktree used to fail with a
confusing "select them one by one" error (which only makes sense for a
multi-selection). It now goes through the same worktree menu, with
labels that make clear the remote is deleted too.
- **Pressing `d` on a worktree can delete its branch.** The plain
confirmation becomes a menu: "Remove worktree", "Remove worktree and
delete branch", and "Remove worktree and delete local and remote
branch".
Throughout, the explicit menu choice acts as the confirmation, so the
separate "Are you sure you want to remove worktree?" prompt is gone; the
dirty-worktree force prompt and the not-fully-merged warning still show
up when relevant.
Closes#5205.
Pressing `d` on a worktree only ever removed the worktree, leaving its branch
behind even though deleting it too is often what you want. Turn the confirmation
into a menu: "Remove worktree", "Remove worktree and delete branch", and "Remove
worktree and delete local and remote branch". The branch-deleting items come
after the plain removal (they do more harm if picked by accident); both are
greyed out for a detached-HEAD worktree, and the local-and-remote one is also
greyed when the branch has no upstream. The plain menu pick is the confirmation,
so the standalone "remove worktree?" prompt is gone (and its now-dead
translation string with it); the dirty-worktree force prompt and the
unmerged-branch warning still appear when relevant.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Picking "Delete local and remote branch" for a single branch that's checked
out in another worktree used to fail with "Some of the selected branches are
checked out by other worktrees. Select them one by one to delete them." That
message only makes sense for a multi-selection; for a single branch there's no
reason we can't remove the worktree and delete both the local and remote branch
in one go. Route that case through the same worktree menu as the local-only
delete, with labels that spell out that the remote goes too. The multi-select
error stays for actual multi-selections.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When you delete a local branch that's checked out in another worktree, the
menu offered to remove or detach the worktree but then stopped there, leaving
the branch you asked to delete still around. Now both actions delete the branch
afterwards, and the labels say so ("Remove worktree and delete branch" /
"Detach worktree and delete branch") to avoid surprises.
Also drop the "Switch to worktree" item: switching abandons the delete the user
asked for, and it's already reachable by checking out the branch or via the
worktrees panel. And drop the now-redundant "remove worktree?" confirmation:
the explicit menu pick is the confirmation (the dirty-worktree force prompt and
the unmerged-branch warning still appear when relevant).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Split the actual worktree removal out of the confirmation in Remove into a
non-confirming helper, and give both Remove and Detach an optional `then`
continuation that runs after a successful removal in place of the default
refresh. Upcoming flows need to delete the worktree's branch once the worktree
is out of the way; threading a continuation through (rather than the caller
firing branch deletion independently) keeps it ordered after the git command
that actually frees the branch. No behavior change yet.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Pull the merged-check-and-force-warning step and the actual git deletion
out of ConfirmLocalDelete and ConfirmLocalAndRemoteDelete into helpers, so
that the upcoming worktree-aware delete flows can reuse them instead of
duplicating the logic. No behavior change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Creating a worktree in lazygit used to be more awkward than it needed to
be:
- The first thing you were asked was whether you wanted a "normal" or
"detached" worktree — a distinction that's confusing to face up front,
and meaningless when you're creating a worktree from a commit, tag or
stash (both choices did the same thing there).
- You then had to type the new worktree's path by hand. That's easy to
get wrong (a mistyped `.worktrees`, for instance), it wasn't clear
whether you were meant to enter the parent folder or the full path, and
it was ambiguous what a relative path would resolve against — especially
when you were already inside another worktree.
- If you picked a branch that was already checked out in another
worktree, lazygit still asked you for a path and only told you it
wouldn't work afterwards.
- There was no quick way to create a new branch and a worktree for it
(sharing the same name) in one step.
This PR reworks the whole flow:
- **No more up-front mode menu.** Pressing `w` on a branch, commit, tag,
stash or remote branch opens a menu whose options are tailored to what
you selected, and each option spells out exactly what it will do — e.g.
"New worktree for 'main'", or "New detached worktree at 'v1.2.0'".
- **You never type a path from scratch.** Lazygit offers ready-made
locations — the folders your existing worktrees already live in, plus an
optional configured default — and shows each as a full path before
anything happens. The folder name is filled in for you from the branch
(or the name you choose). You can still pick "Other…" to type a custom
path.
- **Create a branch and its worktree in one step**, with a single name
used for both. Slashes are preserved, so `feature/foo` gives you a
`feature/foo` branch and a matching nested folder.
- **Branches already checked out elsewhere are caught up front:** the
relevant option is greyed out with an explanation of why, instead of
letting you do the work and then failing.
- **The worktrees panel's `n` is now a single branch picker.** Start
typing, or pick from the list: choosing an existing branch checks it out
in a new worktree, choosing a remote branch creates a local tracking
branch for it, and typing a new name creates a new branch off your
current one — each then simply asks where to put the worktree. Branches
that are already checked out are left out of the suggestions.
There's also a new `worktree.defaultPath` setting to tell lazygit where
to create worktrees by default — useful before you have any existing
worktrees for it to take its cue from. Starting that path with `~/` is
supported (your home dir); this is also supported in the "Other…" path
prompt mentioned above.
Fixes#3230Fixes#4708Fixes#5664
Lazygit runs git directly rather than through a shell, so a literal "~"
reaches `git worktree add` unexpanded and git creates a directory named
"~" instead of using the home directory.
Expand the tilde ourselves, both for paths typed into the "Other"
location prompt and for the worktree.defaultPath config value.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The command was renamed from "View worktree options" to "New worktree",
but its keybinding config key was still 'worktrees.viewWorktreeOptions'.
That name no longer matches the command, and the 'worktrees' section made
little sense: it held a single binding that isn't even used in the
worktrees panel (that panel uses universal.new), only in the branches,
remotes, tags, commits, and stash panels. Other keybinding sections are
named after the panel they're local to; this one wasn't local to any.
Move it to universal.newWorktree, which describes the action and drops the
spurious section, and migrate existing configs automatically.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
RenameYamlKey can only rename a key in place, under the same parent. To
migrate a keybinding from one section to another we need to relocate the
key to a different parent mapping, which is a move, not a rename.
MoveYamlKey creates intermediate maps at the destination as needed and
prunes any maps left empty behind the key, so a section that held only
the moved key doesn't linger as an empty mapping in the user's config.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The old 'n' flow opened a "normal vs detached" menu (the same meaningless
gate the 'w' flow used to have), then asked for a base ref, a path typed from
scratch, and a branch name in three separate prompts.
Replace it with a single picker prompt titled "New worktree for branch",
suggesting local branches not already checked out anywhere, plus remote
branches that don't yet have a local branch of the same name. The entered
value is classified on confirm: an existing local branch checks out into a
new worktree, a remote branch creates a new local tracking branch, and
anything else creates a new branch off the current ref. All three then feed
the same location menu the 'w' flow uses, so paths are chosen from candidates
rather than typed blind. Picking a remote or new branch needs no separate
name prompt — the picker value already is the name. Checked-out branches are
filtered from the suggestions, and a verbatim type-in of one is rejected with
an error.
createWorktree now takes the context to switch focus to once the worktree is
created, so 'n' lands back in the worktrees panel while 'w' still lands in
the branches panel.
This deletes the old NewWorktree / NewWorktreeCheckout core and the now-
orphaned i18n (CreateWorktreeFrom, CreateWorktreeFromDetached, NewWorktreeBase,
NewBranchNameLeaveBlank), completing the migration started for 'w'.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The old flow forced an up-front "normal vs detached" menu (meaningless for
commits, tags and stashes), then asked the user to type a worktree path from
scratch — easy to get wrong, and ambiguous about what relative paths resolve
against. It also offered the same two actions everywhere regardless of what
was selected.
Replace it with per-context "Worktree" menus whose items imply the intent
(new branch + worktree, worktree for an existing branch, detached worktree),
each feeding a shared name -> location -> create pipeline. The location menu
offers candidate parent directories as absolute paths instead of a blank
field, and "Worktree for a branch" is disabled (with a reason) when that
branch is already checked out somewhere, rather than failing after the fact.
Each ref/commit panel binds 'w' in its own controller and calls the matching
typed entry point on the worktree helper, so which menu opens is decided
statically by the call site rather than by dispatching on a ref's dynamic
type. The three commit panels share one menu through BasicCommitsController;
there is no longer a shared worktree-options controller.
The worktrees-panel 'n' flow and its old core (NewWorktree /
NewWorktreeCheckout) are left untouched here so nothing is written and then
rewritten; they migrate, and the dead i18n strings get removed, in a
follow-up commit.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This is the core of "never type a path from scratch": from the repo root,
the configured default path, and the parents of existing worktrees, derive
the ordered list of directories under which a new worktree could be placed.
Pure and unit-tested here; wired into the creation flow in a later commit.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The redesigned worktree-creation flow never asks the user to type a path
from scratch; instead it offers candidate parent directories. Until a repo
has any linked worktrees to learn from, there's nothing to offer, so let
users seed that list with a configured default location.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Custom pagers were not available on Windows because the feature depends
on a working PTY implementation, and the PTY library we are using
doesn't have support for Windows (see
https://github.com/creack/pty/pull/155). This PR adds this support on
our side; the same PTY library is still used on Mac and Linux, but on
Windows we now have our own implementation using ConPTY.
This also enables prompting for SSH passphrases for users who don't have
an ssh-agent running, which previously also didn't work on Windows.
There's one limitation here: pressing `f` in the Files panel means
`fetch --all` by default (unless you turn that off using `git.fetchAll:
false`), in which case passphrase prompting still doesn't work; the
reason is that git spawns a bunch of child processes for each remote to
be fetched, and on Windows these don't inherit the PTY like they do on
Mac and Linux.
Fixes#1453Fixes#5525
ConPTY compresses runs of default-colored spaces into ECH + CUF
(\x1b[NX\x1b[NC) instead of emitting them literally. ECH is still a
no-op for us — our buffer is built sequentially and has nothing to
erase — but CUF has to materialize as N visible space cells so the
gap actually appears, otherwise content the child wrote with leading
indentation slides left against the preceding cell.
The view's cursorForward branch reuses the same machinery as tab
expansion: substitute the trigger byte for a space and let the
repeatCount path emit the cells under the parser-tracked SGR. The
existing notifyCellsWritten plumbing then advances screenCol over
the gap, keeping subsequent CUP targets aligned.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
ConPTY compresses runs of default-colored spaces into ECH + CUF
(\x1b[NX\x1b[NC) rather than emitting them literally. Both currently
fall through the parser's swallow path, so the gap they describe
collapses entirely and content that the child wrote with leading
indentation ends up slid left against the previous cell.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
ConPTY presents its child's output as a screen buffer and uses CUP /
CUD / CNL / VPA to skip over blank rows rather than emitting LFs. The
previous behaviour swallowed all of those and the visible content
collapsed together. Now the escape parser tracks the screen-relative
cursor row, and any CSI that moves the cursor past the current row
emits a cursorDown instruction that the view turns into the matching
number of empty lines.
Column tracking is deliberately omitted: doing it correctly would mean
duplicating the view's grapheme-cluster width math in the parser, and
ConPTY in practice positions to column 1 after a CR-equivalent, which
the existing wx-reset path already handles. ConPTY-internal scrolling
needs no special handling either: it only emits cursor-positioning
escapes within the first, un-scrolled screenful — once its screen
scrolls it switches to plain linefeeds, which the view advances on
directly regardless of the tracked cursor.
Backward cursor moves are silently dropped — the view's buffer is
append-style and can't undo earlier writes. The exception is cursor-home
(CUP to row 1): ConPTY emits it at the start of every screen, so rather
than drop it we re-anchor the row tracking to the current write position.
Without that, a view not rewound in lockstep with ConPTY's screen (the
command log, which streams pty output without a rewind) accumulates
drift, and every later absolute CUP becomes a dropped backward move that
collapses the rows ConPTY positioned with.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
ConPTY presents its child's stdout as a screen buffer and uses CUP
(`\x1b[<row>;<col>H`) to skip over blank rows rather than emitting LFs
for them. Our escape interpreter swallows CUP via the catch-all
"valid CSI final byte we don't implement" branch, so the blank rows
the child put between non-blank ones disappear and the surrounding
lines collapse together — which is what makes the delta-rendered diff
in the screenshot look like its blank lines and section breaks were
removed.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The per-platform getCmdHandlerPty split existed because the Unix side
had creack/pty and the Windows side had nothing — so it fell back to a
non-pty handler. Now that oscommands.StartPty provides a pty on both
platforms, the two files collapse into one cross-platform
implementation and the stub is gone.
cmdHandler grows a 'wait' field because the pty path on Windows spawns
via CreateProcess and never runs exec.Cmd.Start — so cmd.Wait wouldn't
work there. Non-pty handlers set wait = cmd.Wait; pty handlers set it
to the wait closure StartPty returns.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Replace the StartPty stub with a real ConPTY implementation:
CreatePipe + CreatePseudoConsole + PROC_THREAD_ATTRIBUTE_PSEUDOCONSOLE
+ CreateProcess. Pagers and external diff tools now get real terminal
behavior instead of being handed pipes.
One Windows-specific quirk worth flagging: ConPTY does not EOF the
output pipe when the child exits; conhost keeps it alive until
ClosePseudoConsole is called explicitly. A background waiter goroutine
calls ClosePseudoConsole as soon as proc.Wait returns, so callers see
EOF on outRead — restoring the Unix master-fd-EOFs-when-slave-closes
semantics they depend on.
The ErrPtyUnsupported sentinel and the no-pty fallback in newPtyTask
are gone now that both platforms have a real implementation.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Move the pty master behind a small interface (Read/Write/Close/Resize),
and push the actual startup into a platform-specific StartPty function
in pkg/commands/oscommands. The Unix implementation still uses
creack/pty; the Windows implementation is a stub that returns
ErrPtyUnsupported, at which point newPtyTask falls back to a plain cmd
task — matching the existing Windows behavior.
The primitive lives in oscommands rather than pkg/gui because the
cmd_obj_runner pty handler (also in oscommands) is going to consume it
too, and tasks → oscommands is the existing dependency direction.
Same observable behavior on every platform; this just carves out a seam
for a real ConPTY implementation on Windows.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Windows ConPTY can't attach a child process to a pseudoconsole via
os/exec — Go's stdlib doesn't expose PROC_THREAD_ATTRIBUTE_PSEUDOCONSOLE
(golang/go#62708). The ConPTY path has to call CreateProcess directly,
so it can't hand an *exec.Cmd back to the task runner.
Widen NewCmdTask to accept a small Cmd interface satisfied by both
*exec.Cmd (via the ExecCmd adapter) and the Windows ConPTY command type
we're about to add. Change TerminateProcessGracefully to take
*os.Process, which both cmd shapes can provide.
Behavior is unchanged on every platform.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The env var was previously set only on Windows, where the no-op pty
stub was just running the command without a pty and needed to expose
the width to pager scripts another way. With ConPTY coming to Windows
the rationale disappears there, but the env var is documented in
docs/Custom_Pagers.md for pager scripts that can't query the terminal
width directly. Set it on every platform so those scripts remain
portable, regardless of whether a pty is in play.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When conflicts of an in-progress rebase/merge/cherry-pick/revert are
resolved, lazygit pops up a prompt offering to continue it. This is
helpful when you started the operation in lazygit and resolved the
conflicts in your editor. However, the operation can change out from
under it: a coding agent (or the user in another terminal) might
continue or abort it, or advance it to a commit with new conflicts. The
prompt then becomes stale — pressing continue fails with "no rebase in
progress" or acts on the wrong state.
Track whether the prompt is showing, and on each refresh dismiss it if
the operation is no longer in the "resolved, ready to continue" state
that the prompt is offering to act on.
Also, don't even open the prompt in the first place if the rebase or
merge wasn't started from within lazygit. This covers the case where a
coding agent makes a rebase, stops at conflicts, resolves them, and then
takes some more time to fix the build or run tests, in which case
lazygit would show the "continue rebase?" prompt, which is confusing and
undesired.
The only legitimate case that I personally encounter where I start a
rebase myself outside of lazygit is something like `git rebase -x "make
test" <base-of-my-branch>`, in which case there can never be conflicts
if it's done in-place.
Closes#5197.
The prompt offering to continue a rebase/merge is opened from a refresh
and then left to sit until the user acts on it. But the operation can
change out from under it: a coding agent (or the user in another
terminal) might continue or abort it, or advance it to a commit with new
conflicts. The prompt then becomes stale — pressing continue fails with
"no rebase in progress" or acts on the wrong state.
Track whether the prompt is showing, and on each refresh dismiss it if
the operation is no longer in the "resolved, ready to continue" state
that the prompt is offering to act on. This runs on the same refreshes
that would open it (including the background poll and the refresh on
window focus), so the prompt disappears on its own shortly after the
operation moves on.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When conflicts of an in-progress rebase/merge/cherry-pick/revert are
resolved, lazygit pops up a prompt offering to continue it. This is
helpful when you started the operation in lazygit and resolved the
conflicts in your editor. But it's confusing when the operation was
started outside lazygit — e.g. by a coding agent in another terminal
that resolves the conflicts but hasn't continued yet because it's still
running tests or fixing the build. lazygit would then prompt unbidden.
Track whether the in-progress operation was started from within lazygit,
and only show the prompt in that case. We record this right after running
a merge/rebase step (in CheckMergeOrRebaseWithRefreshOptions, the
subprocess branch of genericMergeCommand, and the custom-command
conflict path), and clear it whenever a refresh observes that no
operation is in progress — which also handles an operation that was
finished or aborted externally.
The conflict-resolution tests start their operation by running git
directly (not through lazygit's UI), so they call the new test helper
Common.PretendMergeOrRebaseStartedInLazygit to have lazygit treat the
operation as its own and still get the prompt.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
These started out as a few intermittently-failing integration tests, but
the root cause was real: a handful of places where UI updates
(rendering, model updates, view content) could be applied in a different
order than they were issued, because the order depended on goroutine
scheduling rather than being deterministic. In rare cases that could
make the main view briefly show stale or wrong content — most likely
when moving quickly between items. This was never observed in normal
usage, but caused some integration tests to fail occasionally (both
locally and on CI).
Each commit fixes one of these orderings; see the commit messages for
details.
Update spawned a goroutine per call that then sent on the user-events
channel, so multiple Update calls from the same goroutine could be
reordered by the scheduler — the doc comment even admitted "the order in
which the user events will be handled is not guaranteed." That
non-determinism is a latent source of flaky rendering: code that queues a
model update and then a render in source order could see them run in the
opposite order.
Send on the channel directly instead, so same-goroutine calls arrive in
source order. The send is non-blocking and panics on a full channel
rather than blocking (a blocked send from the UI goroutine would deadlock
against itself) or silently reordering; the buffer is sized generously so
this is unreachable in normal use. UpdateAsync is now identical to Update
and unused, so it's removed along with the shared updateAsyncAux helper.
Copy the outgoing view's content into the target view (the flicker-
prevention step) before queuing the render task, rather than after. The
task writes the fresh content from a worker goroutine, so with the old
order the worker write races the UI-thread copy, and the copy can land
last and clobber the fresh content with stale output.
This is only needed while view writes happen concurrently. Once view
writes are serialized on the UI thread and the view write-mutex goes
away, the synchronous copy always precedes the FIFO-queued write
regardless of order, so the reorder becomes unnecessary. No code comment
is added for it, since that comment would be obsoleted by that work and
likely left behind.
NewTask was incrementing newTaskID and reading taskID inside the
spawned goroutine, so for two NewTask calls in quick succession the
assignment was determined by goroutine scheduling order rather than
call order. When the goroutines reordered, the first NewTask call
could end up with the higher taskID and "win" the staleness check,
superseding the second call's task even though the caller intended
the second to be the latest.
Worse, the staleness check ran after onNewKey, so a goroutine destined
to bail as stale would still reset the view buffer first, potentially
wiping the winning task's already-written output.
Take newTaskID++ synchronously in NewTask so taskIDs follow call order,
and move the first staleness check ahead of onNewKey so a stale task
doesn't side-effect the view before exiting.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Suppress optional locks by default again, except foreground refresh.
Commit d94f2f05 dropped the `GIT_OPTIONAL_LOCKS=0` env var that we used
to set on every git command, and re-added lock suppression only as a
`--no-optional-locks` flag on the background files refresh. The intent
was sound — a foreground `git status` should persist git's refreshed
stat-cache — but the change was too broad: it stopped suppressing
optional locks for every other command too.
The one that bites is the main-view diff. When a folder containing
submodules is selected, we render `git diff --submodule -- <dir>`, and
`--submodule` makes git run `git status` inside each submodule to
describe its "modified" state. That status now grabs the submodule's
index.lock. It runs as a PTY task on its own goroutine, so it races any
submodule-mutating action the user triggers — e.g. resetting a submodule
runs `git -C <submodule> stash`, which then fails with "index.lock: File
exists". This is what made submodule/reset_folder flaky. `git status` is
in fact the only command that takes the optional lock, but the env var
also covered its use inside `git diff --submodule`, inside PTY-run
commands, and inside git's own submodule child processes — none of which
a per-command flag reaches cleanly.
Invert the polarity to match how it worked before d94f2f05: the git
command builder disables optional locks on every command by default, and
the single command that benefits from taking the lock — the foreground
files refresh — opts back in. This restores the original contention
avoidance (including against the user's terminal git) while keeping
d94f2f05's stat-cache-persistence win for the foreground refresh.
This fixes a regression introduced by #5712; labelling this as
"ignore-for-release" because that PR hasn't been released yet.
Commit d94f2f05 dropped the GIT_OPTIONAL_LOCKS=0 env var that we used
to set on every git command, and re-added lock suppression only as a
--no-optional-locks flag on the background files refresh. The intent
was sound — a foreground `git status` should persist git's refreshed
stat-cache — but the change was too broad: it stopped suppressing
optional locks for every other command too.
The one that bites is the main-view diff. When a folder containing
submodules is selected, we render `git diff --submodule -- <dir>`, and
`--submodule` makes git run `git status` inside each submodule to
describe its "modified" state. That status now grabs the submodule's
index.lock. It runs as a PTY task on its own goroutine, so it races
any submodule-mutating action the user triggers — e.g. resetting a
submodule runs `git -C <submodule> stash`, which then fails with
"index.lock: File exists". This is what made submodule/reset_folder
flaky. `git status` is in fact the only command that takes the
optional lock, but the env var also covered its use inside `git diff
--submodule`, inside PTY-run commands, and inside git's own submodule
child processes — none of which a per-command flag reaches cleanly.
Invert the polarity to match how it worked before d94f2f05: the git
command builder disables optional locks on every command by default,
and the single command that benefits from taking the lock — the
foreground files refresh — opts back in. This restores the original
contention avoidance (including against the user's terminal git) while
keeping d94f2f05's stat-cache-persistence win for the foreground
refresh.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This reverts commit eb988395e6, which removed the wrapper on the
grounds that it no longer had anything to do but delegate. We're about
to give it a job again: hosting a git-specific default environment
variable on every command. Restore the scaffolding first, as a pure
behaviour-preserving step, so the behaviour change that follows is
minimal.
It was quite random which version of gofumpt was used depending on how
you invoked it:
- CI would run it via golangci-lint, which we pin to a version that in
turn pins gofumpt to 0.8.0
- running `just format` would use whatever gofumpt is installed locally
(happened to be 0.9.1 in my case)
- saving in VS Code runs it via gopls, so it uses whatever version of
gopls is installed and whichever gofumpt version it bundles (happened to
be 0.10.0 in my case).
So in my case, saving files in VSCode would suddenly reformat them since
I last updated gopls, because the current 0.10.0 version formats code in
a different way. And I don't like some of its choices; this has been
made less aggressive in gofumpt's master (see
https://github.com/mvdan/gofumpt/issues/74), and I'm waiting for a new
release with that behavior before bumping the dependency to the latest
release; until then, pin to 0.9.2.
With the previous order, `go mod vendor` populated vendor/ from the
current go.mod, and only then did `go mod tidy` prune it. If tidy
changed go.mod, vendor/ was left matching the pre-tidy state, so a
single run could leave vendor/modules.txt inconsistent with go.mod
(it took a second run to converge). Tidying first settles
go.mod/go.sum, then vendor rebuilds vendor/ to match in one pass.
This applies both to the `vendor` recipe (justfile and Makefile)
and to scripts/bump_lazycore.sh.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
golangci-lint bundles gofumpt v0.8.0, which formats code differently
from the v0.9.2 we pin in go.mod. Enforcing formatting through
golangci-lint may therefore disagree with `just format`.
Remove gofumpt from golangci-lint's formatters and instead run the
pinned `go tool gofumpt` as a standalone check via a new
scripts/gofumpt-check.sh, wired into CI, `just lint`, and `make lint`.
goimports stays in golangci-lint; it's stable across versions and
nothing runs a competing copy of it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When this was added (dafac52a4c), the job used
golangci-lint-action@v2, which had the problem that its step log was
sparse (it mostly produced PR annotations), so re-running `golanci-lint
run` was a workaround to dump readable errors into the console. The
current version of the action no longer has this problem, so we can
remove that fallback (it would conflict with what we are about to do in
this branch).
When a merge conflict is rendered in the diff3 style, git includes the
common-ancestor section between the two sides. Pressing `b` used to pick
all three, which doesn't make sense; it now picks only the current and
incoming hunks.
Fixes#5486.
`b` on a merge conflict is meant to keep both sides. With the diff3
conflict style git additionally renders the common ancestor between the
two sides, and the old ALL selection kept everything between the
outermost markers, dragging that ancestor into the resolved file.
Rename the selection from ALL to BOTH and restrict it to the top and
bottom hunks so the common base is dropped. Without the diff3 style
there is no ancestor section, so the behaviour there is unchanged.
The user-facing keybinding config was already named pickBothHunks; only
the internal enum, handler, translation and log string still said "all".
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Pressing `b` on a conflict is meant to pick both sides. With the diff3
conflict style, git also renders the common ancestor between the two
sides, and `b` currently keeps that ancestor section too, which is
wrong: the common base is neither side of the merge and must not end up
in the resolved file.
This test captures the current (buggy) behaviour so the follow-up fix
has a clear before/after.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
TestNewCmdTaskInstantStop is flaky: it closes the stop channel from
within start() and asserts the stopped task touched nothing. But Go's
select picks uniformly at random among ready cases, so when opts.Stop
and a data channel are both ready the loop can pick the data channel,
call beforeStart() (which clears the view) and write the prefix before
bailing. In production a task that's already been superseded thereby
clobbers the output the incoming task is about to render.
Check stop with a non-blocking select before each blocking select, so
the stop signal wins whenever it's already closed (Go has no built-in
priority select; this is the idiomatic substitute). The selects keep
their own stop case for liveness, to unblock when stop closes while
parked waiting for data.
TestNewCmdTaskInstantStop is flaky: it closes the stop channel from
within start() and asserts the stopped task touched nothing. But Go's
select picks uniformly at random among ready cases, so when opts.Stop
and a data channel are both ready the loop can pick the data channel,
call beforeStart() (which clears the view) and write the prefix before
bailing. In production a task that's already been superseded thereby
clobbers the output the incoming task is about to render.
Check stop with a non-blocking select before each blocking select, so
the stop signal wins whenever it's already closed (Go has no built-in
priority select; this is the idiomatic substitute). The selects keep
their own stop case for liveness, to unblock when stop closes while
parked waiting for data.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Lazygit only recognizes a handful of escape sequences (mainly for
colors, erasing to the end of the line, and OSC-8 hyperlinks). It would
render all other ones as literal text in the UI, which doesn't make
sense. This wasn't a problem so far because other sequences tend not to
occur in pager output, but we are going to add ConPTY support for
Windows in a later PR, and ConPTY does emit a lot of those escape
sequences, which would then show up as junk in the UI.
While we're at it, also swallow malformed escape sequences instead of
printing them verbatim.
After the previous commit, the escape interpreter still had five paths
that returned an error from parseOne, which view.go handles by rendering
whatever bytes it had accumulated as literal cells. Each of these is a
case where silently consuming the sequence is strictly better than
leaking garbage.
- ';' as the first CSI byte: '\x1b[;5H' is a valid sequence (row
defaults to 1) but we errored on the leading ';'.
- Intermediate bytes in CSI ('\x1b[0 q' = DECSCUSR): the sequence ends
in a final byte we don't implement, so consume and drop.
- Malformed SGR params (empty slot like '\x1b[1;;m'): if outputCSI
fails mid-parse, reset state instead of re-emitting the sequence.
- OSC 8 that isn't actually OSC 8 ('\x1b]8x...'): treat as an OSC we
don't understand and skip to its terminator rather than error-
resetting mid-sequence, which used to leave the rest of the OSC body
to be printed as text.
- The sanity-check overflow paths (too many params, param too long)
now switch to a 'discard until final byte' state rather than
returning the accumulated bytes.
A new stateCSIDiscard centralizes the 'consume bytes until the CSI
final' behavior used by both the intermediate-byte and overflow paths.
errCSITooLong and errOSCParseError are gone with their only callers.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
A text-mode escape interpreter can't do anything meaningful with cursor
positioning, DEC private modes, or terminal resets — but it must still
consume them, not print them as literal text. Before this change, any
sequence outside SGR / EL / OSC-8 errored out of parseOne, and view.go
rendered the unparsed bytes as visible cells. On Windows this would show
up as junk at the start of main-panel output once we add PTY support
using ConPTY, because ConPTY's session-init stream is full of such
sequences.
Three additions to the state machine:
- stateEscape: a single byte in 0x30–0x7E after ESC (e.g. ESC c = RIS)
is a complete Fs/Fp sequence per ECMA-48; consume and reset.
- stateCSI: accept the DEC private-mode prefix bytes (<, =, >, ?), and
accept a CSI final byte (0x40–0x7E) immediately after [ as the end of
a zero-param sequence.
- stateParams: accept any CSI final byte we don't implement as the end
of the sequence rather than a parse error.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The escape interpreter errors on anything outside the handful of
sequences it understands (SGR, EL, OSC 8 hyperlinks), and view.go then
renders the unparsed bytes as text cells.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
For a submodule conflict (where the two branches point the submodule at
different commits, resulting in a `UU` status), pressing space would
show a confusing "Nothing to stage…" error, and enter just stepped into
the submodule; neither is helpful for resolving the conflict. Now both
space and enter open a dialog where you can pick the current commit or
the incoming commit, each shown with its head commit subject so you know
what you're choosing. And the main panel explains the conflict and lists
the commits each side added, so you can see how they diverged before
deciding.
This now behaves very similarly to the way you resolve non-textual
conflicts for text files (e.g. `AU` or `UD`). Speaking of which: for
these it was still possible to press space to stage them, which simply
ran `git add`, whose behavior in this case is to keep the file. This is
neither obvious nor symmetric, so we change this to route space to the
conflict picker too, like enter.
GetOnRenderToMain had grown to handle five distinct rendering cases inline (no
selection, submodule conflict, inline text conflict, non-textual text conflict,
and the normal working-tree diff), which made it hard to follow. Split each case
into its own method so the function reads as a short dispatcher, and pull the
repeated main-view boilerplate into renderToMainWithTask. Pure refactor; no
behavior change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When a conflicted submodule is selected, the main view shows the commits
each side added relative to their common ancestor as two indented logs,
labelled current and incoming, so it's clear which commit each side would
resolve to.
The logs aren't truncated (the view scrolls). If a side added no commits
of its own (e.g. it was rewound to an ancestor of the other), its head
commit is shown instead.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When both sides of a merge moved a submodule's gitlink, git reports it as "UU".
Pressing space used to fall into the submodule no-op guard and pop the confusing
"Nothing to stage..." error, and enter just entered the submodule, which does
nothing to resolve the superproject conflict.
Treat a conflicted submodule like the other non-textual conflicts: both space
and enter now open a picker offering the two candidate commits, "current" and
"incoming", each labelled with its summary. `git checkout --ours/--theirs` is a
no-op on gitlinks, so we resolve by checking the submodule out at the chosen
commit and staging it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
For a non-textual conflict (e.g. DD/AU/UA/UD/DU), pressing space used to run the
normal stage path, which did something unclear: `git add` happens to resolve the
conflict by keeping the file, but that's neither obvious nor symmetric. Route a
single such file to the same Keep/Delete picker that enter opens, so space and
enter agree.
For a range selection that includes one of these conflicts, staging makes no
sense, so disable it with a toast that points the user at resolving them one at
a time. (Entering a range was already disabled with the standard toast.)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Some merge conflicts can't be resolved by editing markers in the merge view;
they require a dialog that picks one side (the "non-textual" conflicts like
DD/AU/UA/UD/DU). Both `enter` and, soon, `space` need to recognize these, so
pull the test into a shared predicate and rename handleNonInlineConflict to
openConflictResolutionMenu to match.
Restructure EnterFile so the predicate is checked first, ahead of the submodule
and inline-conflict branches. This is its final shape: upcoming commits only add
the submodule case to the predicate, with no further reordering. Behavior is
unchanged here, since the predicate is currently false for submodules.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The status panel already binds the universal edit key to "edit config
file", but that's only reachable while the status panel is focused. Add
a dedicated global binding (alt+shift+c) so the config file can be
opened from anywhere.
The status panel already binds the universal edit key to "edit config
file", but that's only reachable while the status panel is focused. Add
a dedicated global binding (alt+shift+c) so the config file can be
opened from anywhere.
The "edit config file" command is about to gain a second, global
keybinding alongside the existing status-panel one. Moving its body into
an action struct (the convention GlobalController already follows for
all its handlers) lets both controllers delegate to one implementation.
OpenFile (`o`) is for opening a file as if it was double-clicked in
Finder/Explorer; this is useful for binary files like PNGs, but never
for text files. You want to edit them, and there's `e` for that.
Lazygit's left-hand side panels — and the tabs within them — have always
had a fixed arrangement. This adds a `gui.sidePanels` option so you can
lay them out the way you want.
You can:
- Reorder the panels
- Hide panels you don't use
- Regroup which panels share a slot as tabs
- Promote a tab to its own top-level panel — e.g. pull Worktrees out of
the Files panel so it's always visible
#### How it works
`gui.sidePanels` is a top-to-bottom list. Each entry is a list of names
that share one panel as tabs. The default is
```yml
gui:
sidePanels:
- [status]
- [files, worktrees, submodules]
- [branches, remotes, tags]
- [commits, reflog]
- [stash]
```
If you want to promote `worktrees` to a side panel of its own, and never
want to see stashes, use
```yml
gui:
sidePanels:
- [status]
- [files, submodules]
- [worktrees]
- [branches, remotes, tags]
- [commits, reflog]
```
Exercises the path the live reload relies on: a per-repo lazygit.yml
sets a different side panel layout, and switching between repos
re-applies each one's own layout (the new-repo path for the cloned repo,
the cached-repo path on switching back).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When the config file changes and lazygit regains focus it reloads the
config, but the side panel window assignments, default views, tab
strips, and z-order were only ever set up on repo entry, so a changed
sidePanels wouldn't take effect until restart. Re-apply it from the
reload path: reassign windows and default views and restore each panel's
default tab.
The focused panel needs care: resetting it to its default tab would
leave the focused tab hidden behind that default tab, so the panel looks
unfocused even though its tab is selected. Re-focus the current context
so its tab stays shown and highlighted; only when the new config hides
the focused panel entirely do we move focus to the default side panel.
Tab strips are already refreshed via configureViewProperties.
Side panel tabs share a window, so which tab is shown is decided by view
z-order rather than the visibility flag (every tab in a window is
'visible'). Tests had no way to assert which tab is actually drawn in
front, which is distinct from which view has keyboard focus. Expose the
window's top view and add an IsActiveTab assertion built on it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Lazygit reloads changed config files when its terminal window regains
focus, but the test harness had no way to simulate that focus event, so
the live config-reload path was untestable. Add a focus event to the
replayed-events queue and expose it through the GuiDriver as FocusIn.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The tab-assignment loop only ever set a view's tabs; it never cleared them.
That was fine when the groupings were fixed, but with gui.sidePanels a
config reload can turn a tab into a standalone panel, and the old tab strip
would linger on its title. Index the tab strips by view name and assign to
every view, so views that dropped out of a multi-tab panel get their tabs
cleared. No change for a given config; this only matters across a reload.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Cover the three things gui.sidePanels enables: reordering the panels
(swapping branches and commits, checked via their jump keys), hiding a
panel (omitting stash, checked by cycling past the last panel and wrapping
to the first), and promoting a tab to its own panel (worktrees becomes a
top-level panel reachable by a jump key, and the files panel's remaining
tabs cycle straight to submodules).
The tests drive focus with explicit jump keys rather than ViewDriver.Focus,
which assumes the default panel layout.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Within a window the visible tab is whichever view sits on top in the
z-order, and onRepoViewReset establishes that z-order from a fixed list
that needn't agree with the configured tab order. After ordering the
views, bring each panel's first configured tab to the top so that, for a
panel whose tabs have been reordered, the configured first tab is the one
shown before the panel is focused. No effect on the default layout.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
In squashed mode (short terminals) the unfocused side panels each reserve
a row and the focused panel takes whatever is left, so once the unfocused
panels' rows fill the height the focused panel collapses to nothing and
panels below it render off-screen. The fixed floor of 9 was tuned for five
panels; with the panel count now configurable (and promotion allowing up
to ten), grow the floor by one per panel so we show the "not enough space"
view instead of a broken layout. Five panels still floor at 9.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
These two views only ever appeared as tabs (of the files and commits
panels), so unlike the other side views they had no title set; the tab
strip supplied their label. Once a tab can be promoted to its own panel
they can appear without a tab strip, so set their titles like the others.
This has no effect in the default layout, where both are always tabs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replace the hard-coded side panel order, tab groupings, and window
assignments with values resolved from the gui.sidePanels config. The panel
order (SideWindows and the layout boxes), the tab strips (viewTabMap), the
per-context window names, each window's default view, and the jump-label
groups all now come from the config rather than from five separate
hard-coded lists.
A panel's window name is the name of its first tab, and panels not listed
in the config get their own window name so their views stay hidden instead
of overlapping a visible panel. Three small lookups translate config names
into views, tab titles, and contexts; a test keeps them in sync with the
set of valid names. The lookups are split this way (rather than one
resolver) because configureViewProperties runs before the context tree
exists, so the title/view lookups must not depend on it.
The config is applied to a repo's contexts via applySidePanelConfig on
every repo entry, including the cached-repo path: a repo's per-repo config
can differ from the previously visited one's, so each repo's contexts must
be (re)assigned from its own config rather than kept from when they were
first built.
With the default config this reproduces today's layout exactly.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The number of side panels is about to become configurable, so a fixed
count of jump-to-panel keys no longer makes sense: a user who configures
six panels shouldn't be forced to also extend jumpToBlock, and one who
hides a panel shouldn't have to trim it. Drop the count check entirely
(individual keys are still validated) and assign keys to panels
positionally, for as many panels as there are keys. Surplus panels go
without a jump key but remain reachable via the next/previous-panel keys.
This also removes the log.Fatal that the count check guarded against.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This adds the user-facing surface for configuring the side panels: their
order, which ones are visible, and how tabs are grouped into panels. Each
entry is either a single panel name or a list of names sharing one panel
as tabs, mirroring how the Keybinding type accepts a scalar or a sequence;
the JSON schema restricts the names to the known set so editors can offer
completion and catch typos. The default reproduces today's layout exactly.
Validation rejects unknown or duplicated names, and requires the files,
branches, and commits panels to always be present: a lot of code focuses
those directly (e.g. after resolving a conflict or popping a stash), so
allowing them to be hidden would let that code focus a hidden panel.
Nothing reads the option yet; the layout still uses the hard-coded order.
Wiring follows in a later commit so the inert surface (and its generated
docs and schema) can be reviewed on its own.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The jump-label prefixes were assigned to each side view by name, twice
(once for the on case, once for off), so the panel-to-views grouping and
the panel order were baked into 28 positional statements. Express the
grouping once as a slice of view groups and loop over it, deriving each
panel's label from its index. The label lookup is now bounds-checked, so
it no longer assumes exactly as many jump bindings as panels. Behavior is
unchanged; this prepares the grouping to come from config.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The remote-branches context is a transient guest that takes over a host
window when you drill into a remote. SubCommits and CommitFiles already
adopt their parent's window via SetWindowName when shown; RemoteBranches
relied instead on its static window name ("branches") matching the remotes
context's window. That assumption only holds while remotes lives in the
branches panel. Adopt the parent's window like the other transient guests
so remote branches render in the right place once panels are configurable.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The three branches of sidePanelChildren each spelled out the five side
windows by name, so the panel order lived in three places and the
status/stash sizing special-cases were tangled into positional literals.
Map each branch over one `windows` slice instead, and fold the
normal-height special-cases (status's fixed height, stash's
collapse-unless-focused) into a single per-window function. Behavior is
unchanged; this isolates the ordering so it can later come from config.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Record the working preference that calls which come up during
implementation (and weren't settled in planning) should be raised and
decided together, not made unilaterally and discovered later in the diff.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Lazygit builds a shell command by interpolating Quote'd arguments into a
template and running the result via `cmd /c`. Several things were wrong
on Windows:
- Quote emitted bash-style `\"…\"` quoting, which cmd.exe doesn't
understand. Making it usable at all previously required a fragile
round-trip through str.ToArgv and re-escaping.
- The assembled command line was handed to `cmd /c` without `/s`, so
cmd's default rules stripped the wrong quotes once the line contained
more than two of them (e.g. a quoted editor path at a location with
spaces, plus a quoted filename that also contains spaces).
- Shell metacharacters were escaped with `^` (`&` → `^&`, etc.), which
neutralised command chaining, pipes, redirection and `%VAR%` expansion
in custom commands.
Quote now emits the standard Windows convention directly, and NewShell
hands cmd.exe the fully-assembled line verbatim via SysProcAttr.CmdLine,
wrapped as `cmd /s /c "<command>"`. The /s flag strips exactly the outer
quote pair we add, leaving each argument's own quoting intact. With the
`^` escaping gone, metacharacters in a custom command reach cmd as the
author intended; this also removes the spurious `^` reported in #3092.
Fixes#5560Fixes#2427Fixes#4147
The unit tests only assert the arguments lazygit constructs; they can't
catch cmd.exe's own quote-stripping, which is where #5560 actually
manifested. This test builds a small editor executable, places it and
the file it opens at paths containing spaces, runs it through real
cmd.exe via NewShell, and checks the editor received the intended args.
It runs only on Windows.
Co-Authored-By: Antoine Gaudreau Simard <a.simard@multidev.net>
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
lazygit builds a shell command by interpolating Quote'd arguments into a
template and running the result via `cmd /c`. Several things were wrong
on Windows:
- Quote emitted bash-style `\"…\"` quoting, which cmd.exe doesn't
understand. Making it usable at all previously required a fragile
round-trip through str.ToArgv and re-escaping.
- The assembled command line was handed to `cmd /c` without `/s`, so
cmd's default rules stripped the wrong quotes once the line contained
more than two of them (e.g. a quoted editor path at a location with
spaces, plus a quoted filename that also contains spaces).
- Shell metacharacters were escaped with `^` (`&` → `^&`, etc.), which
neutralised command chaining, pipes, redirection and `%VAR%` expansion
in custom commands.
Quote now emits the standard Windows convention directly, and NewShell
hands cmd.exe the fully-assembled line verbatim via SysProcAttr.CmdLine,
wrapped as `cmd /s /c "<command>"`. The /s flag strips exactly the outer
quote pair we add, leaving each argument's own quoting intact. With the
`^` escaping gone, metacharacters in a custom command reach cmd as the
author intended; this also removes the spurious `^` reported in #3092.
Fixes#5560Fixes#2427Fixes#4147
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On Windows, NewShell escapes shell metacharacters (`&`, `|`, `<`, `>`,
`%`) with `^` and splits the command into separate arguments. The
operators in a custom command therefore never reach cmd as operators,
so command chaining (`&&`), pipes, redirection and `%VAR%` expansion all
silently break (#2427, #4147, #5113; the stray `^` is also what #3092
reports).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On Windows, Quote wraps arguments in bash-style `\"…\"` and rewrites
embedded double quotes as `"'"'"`. Neither convention is understood by
cmd.exe or CommandLineToArgvW, so commands built from quoted arguments
are mis-parsed once they contain quotes or spaces (#5560).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
`just e2e` used to be the *visible-UI* test runner. Running it with no
arguments launched every integration test in a visible UI — painfully
slow — and it was easy to type `just e2e` out of habit when you actually
meant `just e2e-all` (the headless run-all). This PR reshuffles the
recipes so the common, fast path is the one with the shortest name.
## Recipe changes
| Command | Before | After |
| --- | --- | --- |
| `just e2e` | All tests, **visible UI** (very slow) | All tests,
**headless** (what CI runs) |
| `just e2e <name>` | — (no such target) | That one test, **headless** |
| `just e2e-cli [--slow\|--sandbox\|--debug] <name>` | — | A test in a
**visible UI** (the old `e2e`) |
| `just e2e-tui` | unchanged | unchanged |
| `just e2e-all` | All tests, headless | **removed** (now redundant) |
`just e2e` and `just e2e-cli` accept either a test name
(`submodule/reset`) or a full file path
(`pkg/integration/tests/submodule/reset.go`), and `e2e-cli`/`e2e-tui`
mirror the two `cmd/integration_test/main.go` subcommands (`cli` and
`tui`).
Also added zsh tab-completion for the test names, so `just e2e sub<Tab>`
expands to `just e2e submodule/`, then drills into the tests within.
For running an integration test just to see if it fails or succeeds,
headless mode is sufficient and actually better, because it works in
small terminals like vscode's bottom panel; the "main.go cli" way of
running tests tends to fail there because the layout renders differently
in such a small window. Headless tests use a fixed window size, so they
don't have this problem. It's also slightly faster.
The other vscode tasks (slow and sandbox) are unchanged, they only make
sense with a visible UI.
The integration README still described the raw `go run cmd/integration_test`
and `go test` invocations, which are easy to get wrong (the headless go-test
command in particular) and don't match how we actually run the tests. Rewrite
the running/debugging/sandbox instructions around the justfile's e2e recipes
instead, and point at the optional zsh completion script. Also switch the
test-list regeneration hint to `just generate`, matching the rest of our docs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
just's completion is clap-dynamic and exposes no hook for completing a
recipe's arguments, so `just e2e <Tab>` couldn't suggest anything. Wrap
just's completer: for the e2e/e2e-cli recipes, complete the test names
found under pkg/integration/tests/, delegating everything else back to
just.
The names are fed to _multi_parts so they complete one "/"-separated
segment at a time — an empty <Tab> offers just the categories, then
drills into the tests within a category — and the .go extension and the
shared helper files are stripped so the candidates are exactly the names
the recipe accepts.
Source it from ~/.zshrc (after compinit) to enable; it's a no-op without
just installed and only activates inside a repo with a justfile and a
pkg/integration/tests/ directory.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
`just e2e` was the visible-UI runner, but it's only useful for a single test
(and even then only with --sandbox/--slow); running it without arguments is far
too slow, yet it was easy to invoke by reflex when `just e2e-all` (run all
headlessly) was meant.
Make `just e2e` the everyday headless runner: no arguments runs the whole
suite (what e2e-all did), and a test name runs just that one headlessly via
`go test -run` — which we had no target for before. The visible-UI runner moves
to `e2e-cli`, pairing with the existing `e2e-tui` (the two main.go subcommands).
e2e-all is now redundant and removed.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
With the recently added external change detection, it happens more often
now that we refresh the commits list because an agent made a commit in
the background. In this case, if we keep the selection index the same,
it now points at a different commit, making the main view show a
different commit too, which is confusing and annoying. To fix this,
track the selected commit and range anchor by hash before reloading,
then restore those rows if both hashes still exist. This also allows us
to get rid of some bespoke code that did this for the specific cases of
reverting a commit or cherry-picking commits, because those are now
handled by the generic mechanism.
Starting an interactive rebase (the `edit` command and quick-start) used
to capture the selected commit range by hash before starting the rebase
and restore it afterwards, because new update-ref lines for stacked
branches can shift the commits' positions in the list. The generic
keep-selection-by-hash mechanism now does exactly this for every refresh,
including these, so the bespoke code is redundant.
This relies on the previous commit, which taught the generic matcher to
handle the case where the selected commit turns into a rebase TODO entry
while it's being edited - something the bespoke code handled implicitly
by matching on hash alone.
When restoring the commit selection after a refresh we match by hash and
TODO status. The TODO status is part of the match so that a commit being
reverted or cherry-picked is matched to the real commit rather than to
the rebase TODO entry that shares its hash.
But a selected commit can also change its TODO status across a refresh:
when starting an interactive rebase that stops to edit it, the real
commit becomes a TODO entry. Fall back to matching by hash alone when
there is no exact match, so the selection is still restored in that case.
The next commit relies on this to remove bespoke selection-restoration
code in the local commits controller that matched by hash alone, which
the generic mechanism otherwise wouldn't fully replace.
With the recently added external change detection, it happens more often
now that we refresh the commits list because an agent made a commit in
the background. In this case, if we keep the selection index the same,
it now points at a different commit, making the main view show a
different commit too, which is confusing and annoying. To fix this,
track the selected commit and range anchor by hash before reloading,
then restore those rows if both hashes still exist. This also allows us
to get rid of some bespoke code that did this for the specific cases of
reverting a commit or cherry-picking commits, because those are now
handled by the generic mechanism.
Preparation for the next commit, which selects the newly created commit
after a commit succeeds, while leaving the selection alone on failure.
For now success and failure use the same refresh options, so behavior is
unchanged.
This guards against regressions from the changes that follow. We're
about to add a mechanism that keeps the selection anchored by commit
hash, but we need to make sure that it doesn't take effect here; after a
merge we want to select the newly added merge commit. In the current
state of the code this happens to work because we keep the selection
index the same, which happened to be 0 here; later we will change this
to explicitly select the head commit after the merge.
In a large repo, when touching (editing) more and more files, staging
hunks in lazygit could become slower and slower over time. Specifically,
this happened when you edited a lot of files and then discarded their
changes again. I have seen cases where staging a hunk began to take
seconds; the fix then was to type `git status` on the command line once,
this made it fast again.
The reason was that lazygit was trying too hard to be a good git
citizen, and used the `GIT_OPTIONAL_LOCKS=0` env var on every git
command it made. The consequence was that it never updated the mod date
cache in git's index file, which caused git to rehash every file whose
mod date doesn't match what it recorded in the index, on every refresh.
Typing `git status` updates that cache, which is why this was a
workaround.
Fix this by using the `GIT_OPTIONAL_LOCKS=0` flag only for refreshes
that are running unattended in the background, i.e. the periodic
autoRefresh and the newly external change detection. For those it is
important because it avoids "cannot lock index" errors for commands that
the user might issue at the same time. All other refreshes are user
initiated and no longer use the flag, which is in line with what `git
status` does, so this keeps performance from deteriorating over time.
The wrapper existed to add a git-specific env var to every command. Now
that that's gone, its New/NewShell/Quote methods just delegated to the
inner builder. The only remaining git-specific behavior — the command
runner — is attached in the constructor via CloneWithNewRunner, which
already returns a complete builder, so we can return that directly and
drop the wrapper struct.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
We set GIT_OPTIONAL_LOCKS=0 for every git command we run. That env var
only affects `git status`: it tells git not to take the optional lock it
would otherwise use to write the index back after refreshing the cached
stat information. The intent was to avoid contending for index.lock with
git commands the user runs in a terminal.
The downside is that our `git status` never persists the refreshed
stat-cache. So whenever the working tree's cached stat info goes stale
(e.g. editing files and discarding the changes, or a checkout), every
subsequent status re-hashes the affected files to confirm they're clean,
and stays slow until something else writes the index (such as the user
running `git status` in a terminal).
Fix this by only suppressing optional locks for refreshes that run
unattended in the background; foreground refreshes triggered by a user
action now run a plain `git status` that writes the refreshed index back,
just like the command line does. Background refreshes keep passing
--no-optional-locks so they still can't cause lock contention.
RefreshOptions gains a Background flag that the background routines set,
threaded down to the status command.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Lazygit refreshes its UI when its terminal window gets the focus, which
is enough for the situation where the user makes a commit in their IDE
or in another git client. It isn't enough for the case that a coding
agent makes commits in the background. Improve this by doing a
light-weight poll of the git state in the background, and refresh when a
change is detected.
This adds two settings to control the mechanism:
- `git.autoDetectExternalChanges` (default true) is the on/off switch,
parallel to autoFetch/autoRefresh
- `refresher.externalChangeCheckInterval` (default 2 seconds) is the
poll cadence
Addresses #5554.
Add a 2-second background poll that calls Status.RefsSnapshot and
compares against the snapshot stored at the end of the last refs-
touching refresh. On a diff, trigger a full refresh — same scope as the
focus-in handler, because once we know something changed externally
we can't be sure what (an agent might have created a worktree or
stashed something alongside the commit we detected).
Refresh runs in SYNC mode because goEvery already serializes iterations
via <-done: a slow refresh delays the next tick naturally instead of
letting work stack. The post-refresh hook from the previous commit
updates the snapshot, so in-app commands don't cause the next poll to
spuriously re-fire.
Disabled in the integration test config, like autoRefresh and autoFetch,
because demo replays make repo changes throughout the run; at 2-second
cadence the resulting full refreshes compete with the demo's own
choreography and push some demos past their 40-second timeout.
Also list the two new config keys in checkForChangedConfigsThatDontAutoReload
so a config edit warns the user that lazygit needs a restart.
Add the storage and snapshot-update half of the external-change-detection
mechanism. RefreshHelper now keeps a mutex-protected snapshot string and exposes
accessors for it; Refresh captures a fresh snapshot at the start of any refresh
whose scope set includes COMMITS or BRANCHES.
We capture before reading the git state, not after. Capturing after would let an
external change that lands between the git state read and the snapshot (say, the
next step of a rebase running in another terminal) leave the stored snapshot
newer than what we actually rendered; the poller would then see no difference
and never refresh again, stranding the UI on the intermediate state. Capturing
first keeps the snapshot from running ahead of the render, so if disk moves
during the refresh the next poll catches it.
No reader of the snapshot exists yet — the polling goroutine that consumes it
comes in a later commit. Keeping the snapshot hook in its own commit isolates
the invariant that the snapshot stays in sync with what the UI has observed,
which is what makes the poller's change-detection predicate work across in-app
commands and focus-in refreshes.
Two settings to control the upcoming background polling mechanism:
- git.autoDetectExternalChanges (default true) is the on/off switch, parallel to
autoFetch/autoRefresh
- refresher.externalChangeCheckInterval (default 2 seconds) is the poll cadence
Disabling is the bool's job, not a magic 0 interval, matching the existing
convention.
Not yet referenced by any code.
A cheap fingerprint of local branches and HEAD that future code can poll to
detect when refs have moved externally.
Branches come from a porcelain for-each-ref. HEAD is read directly from
.git/HEAD: that avoids spawning a child process and captures the symref-or-hash
distinction we need to tell "detached at X" apart from "on a branch pointing at
X" — they share a commit hash, which is exactly the situation at the end of a
rebase when HEAD reattaches to the branch. The reftable backend doesn't keep a
real .git/HEAD (it writes a fixed stub), so when we see that stub or the file is
unreadable we fall back to porcelain commands, which are backend-agnostic.
Uses DontLog so a future polling caller won't spam the command log. Not yet
wired up to any caller.
Several downstream conditions in Refresh() relied on multi-scope predicates to
express "if X is in scope, Y also needs refreshing". This makes it hard to add
new code that needs to ask "does this refresh re-read refs?", because the answer
involves mirroring one of those predicates and keeping them in sync forever.
Expand the co-refreshing relationships once, up front, right after the scope set
is built. The downstream conditions then collapse to single-scope checks against
the (now-expanded) set. Behavior is preserved.
Two of the scattered multi-scope conditions are intentionally left as-is because
they express subsumption rather than co-refresh (one branch already does the
work of another internally — expanding would cause double-refresh), and one
expresses mid-function coupling on a flag set inside the COMMITS/BRANCHES block.
The schema annotated refreshInterval and fetchInterval with minimum=0,
but the background routines reject a value of 0 (they require
interval > 0 and otherwise log it as invalid and disable the feature).
So 0 is not actually a valid value; switch to exclusiveMinimum=0 so the
schema matches what the code accepts.
Several commands (rewording or amending an earlier commit, custom patch
operations, etc.) are implemented by starting an interactive rebase that
stops at a commit, amending it, and continuing. When no conflict occurs,
the user isn't meant to notice a rebase happened at all.
But a background file refresh can fire while the rebase is mid-flight
and render a dirty working copy of whatever the behind-the-scenes rebase
is doing (e.g. applying a custom patch).
To fix this, we pause the background routines for the duration of any
waiting-status operation — exactly the window in which lazygit is
driving the git operation itself and will refresh once at the end. The
boundary is also right for the conflict case: when a rebase stops on a
conflict the operation returns, the pause releases, and background
refreshes resume for the interactive resolution that follows.
Several commands (rewording or amending an earlier commit, custom patch
operations, etc.) are implemented by starting an interactive rebase that stops
at a commit, amending it, and continuing. When no conflict occurs, the user
isn't meant to notice a rebase happened at all.
But a background file refresh can fire while the rebase is mid-flight and render
a dirty working copy of whatever the behind-the-scenes rebase is doing (e.g.
applying a custom patch).
To fix this, we pause the background routines for the duration of any
waiting-status operation — exactly the window in which lazygit is driving the
git operation itself and will refresh once at the end. The boundary is also
right for the conflict case: when a rebase stops on a conflict the operation
returns, the pause releases, and background refreshes resume for the interactive
resolution that follows.
Replace the pauseBackgroundRefreshes bool with a count. The single existing
caller (subprocess suspend/resume) is unaffected, but we're about to add a
second, independent reason to pause — lazygit driving a git operation that the
background routines would otherwise catch mid-flight — and the two scopes can
overlap. A bool can't represent "two things both want refreshes paused"; a count
can.
When using delta as a custom pager, and the view is so narrow that delta
needs to wrap long lines, only the last segment of such a wrapped line
would have its background color extended to the right edge of the view,
resulting in a block of lines with a frayed right edge, like this:
<img width="623" height="218" alt="Screenshot 2026-06-18 at 17 25 36"
src="https://github.com/user-attachments/assets/346156af-212f-44c3-b8aa-2a66c23ed836"
/>
Fix this by extending the wrapped line's background colors to the right
edge as well, making it look like this:
<img width="623" height="218" alt="Screenshot 2026-06-18 at 17 25 23"
src="https://github.com/user-attachments/assets/9af46ba3-701b-47ce-b38d-bdffaf5182fa"
/>
Tools like delta paint each diff line's background with '\x1b[K' so
the color reaches the right edge. Up to now the '\x1b[K' handler
appended (InnerWidth - cx) explicit padding cells with the fill bg
so rendering picked up the color. That worked for short lines but
silently degraded once content exceeded InnerWidth: the repeat
count went non-positive, no cells were added, and after wrapping
the partial tail segment was left without any cells carrying the
fill color, so draw() fell back to the view's default bg.
Record the fill colors on the source line as optional
trailingFillAttributes. In the '\x1b[K' handler set them (and drop
the padding-cell loop — the metadata covers both the wrap and the
non-wrap cases). In draw(), once per source line, pick the trailing
cell's fg/bg from the metadata if present and otherwise from the
view defaults; then the inner-loop fills past-content cells with
that.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The sentinel was appended to every \n-terminated line solely so that
draw()'s prevFgColor tracking would reset to default for the trailing
area; without it, an AttrReverse-styled last cell would carry its
rendered bg past the end of the line.
The same prevFgColor mechanism propagated AttrReverse past content on
*unterminated* lines too — which doesn't match real terminal behavior
(try `print '\x1b[7m\x1b[31mfoo'` in a shell: the reverse stops at
the last character) and isn't relied on by anything in lazygit, since
all our writers terminate lines with \n.
Drop the sentinel cell, drop prevFgColor, and just have draw() paint
trailing cells with the view's default fg/bg. The
TestUnterminatedReverseLineExtendsToEdge regression test inverts to
document the new (terminal-matching) behavior, renamed accordingly.
TestWriteString expectations also drop the trailing "" that came
from the sentinel.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The cells of a source line will soon need to carry metadata about how
the line was terminated (newline vs filled to edge via \x1b[K). Move
to a struct so there's somewhere to put it; this commit only renames
[][]cell to []line{cells: ...} with no behavior change.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The four ReplaceAll(str, "\x00", "") calls (and the equivalent
rune-by-rune skip in linesToString) are leftover from when cell.chr
was a rune and \x00 was used as an internal sentinel. With chr now
being a string and no code path writing \x00, the filtering never
strips anything.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Tools like delta emit each diff line with the bg color set, then
\x1b[K to fill the rest of the row with that bg color. When the
content fits within the view's inner width, gocui's \x1b[K handling
appends explicit padding cells and rendering works. When the content
exceeds the inner width, \x1b[K adds no cells (negative repeat
count), the line is wrapped into multiple segments, and the partial
tail segment's trailing cells fall back to the view default bg
instead of continuing the fill color.
Add a test that drives draw() against a tcell mock terminal and
asserts the current (buggy) trailing background.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The next few commits restructure how the view's draw() decides the
fg/bg of cells past the end of a line's content. Pin down three
existing behaviors first so the restructuring stays a refactor:
- '\n' should reset attributes for the trailing area so a reversed
final cell doesn't bleed into empty space.
- An unterminated line with AttrReverse on its last cell should
propagate that to the right edge (otherwise the rendered bg
abruptly stops at the last character).
- '\x1b[K' on a line that fits within InnerWidth should fill the
remaining cells with the current bg color.
Introduce a small WithSimulationScreen helper that swaps in a tcell
mock terminal so tests can call view.draw() and inspect rendered
cells via Screen.Get().
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Lazygit lets you configure multiple pagers and switch between them with
the `|` key. The changes in this PR improve this for the case that you
have more than two.
- **You can see which pager you switched to.** The notification used to
just say "pager 2 of 3"; now it shows the pager's name, so you no longer
have to remember the order to know where you've landed.
- **You can name your pagers.** By default the name is taken from the
pager command, but you can set your own name in the config. This helps
when two entries run the same command with different options (for
example plain `delta` and `delta --side-by-side`).
- **You can cycle backwards.** Alongside `|`, which moves to the next
pager, the new `\` key moves to the previous one — so you can step back
instead of going all the way around the list to return to one you just
passed. This is especially useful when you have two pagers that you
alternate between often (e.g. `delta` and `delta --side-by-side`), but
also have several others in the list that you use only occasionally.
- **Invalid pager setups are caught early.** If an entry combines
options that can't be used together, lazygit now tells you about it on
startup instead of silently producing a broken diff.
With more than a couple of pagers, having to cycle forward through all
of them to reach the previous one (or to back out of an accidental press
of `|`) is tedious. Add a second binding that cycles backward.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A reverse-cycle handler is about to need the same re-render-and-toast
logic. Pull it out first so the behavior change that follows only has to
swap the cycle direction.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When cycling pagers, "Selected pager 2 of 3" gives no clue which pager
you landed on; with several configured you have to remember the order.
Include the pager's name in the toast instead.
The name is normally derived from the first word of the pager command,
but that isn't always enough: two entries can share a command but differ
in options (e.g. "delta" and "delta --side-by-side"), and an entry may
have no command at all (the default entry, or when using
useExternalDiffGitConfig). So add an optional `name` field that
overrides the derived name.
The message was also hardcoded in English; localize it while we're here.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A pager (GIT_PAGER) formats the diff git produces, while
externalDiffCommand and useExternalDiffGitConfig change how git produces
the diff in the first place. They are different pipeline stages, not
alternatives, so combining them on one entry just pipes one through the
other and produces garbled output (e.g. delta trying to parse
difftastic's side-by-side output as a unified diff). The two external
mechanisms likewise conflict, with the explicit command silently
shadowing the git config one. Treat all three as mutually exclusive and
reject configs that set more than one on the same entry.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Staging and unstaging submodules didn't work properly when the submodule
had uncommitted changes of its own (modified or untracked files inside
it). This PR fixes a few related problems:
- **Unstaging a submodule that has both a new commit and uncommitted
changes now works.** Previously, staging such a submodule left it
half-staged, and from there the stage key would only ever try to
re-stage it — there was no way to unstage it again. Now the stage key
toggles it back to unstaged as expected.
- **Trying to stage a submodule that has nothing stageable now explains
why.** When a submodule's only changes are uncommitted content inside it
(with no new commit), there's nothing the parent repository can stage.
Instead of the keypress silently doing nothing (except briefly flashing
the status to staged and then back to unstaged), lazygit now shows an
error explaining that you need to commit inside the submodule first.
- **The stage key (space) and the stage-all key (`a`) now behave
consistently.** All of the above applies equally whether you act on the
submodule directly or use "stage all", and "stage all" no longer gets
stuck or behaves differently from the stage key just because a submodule
with uncommitted changes is present in the list.
Fixes#3641.
A submodule that only has dirty or untracked content (no new commit) can't
be staged from the parent repo, but it still shows up as having unstaged
changes. Pressing stage on it therefore briefly flashed as staged and then
reverted, without explaining why nothing was staged.
Detect this case (via `git submodule status`, where a '+' prefix marks a
stageable commit change) in the shared stage/unstage decision: if the only
thing that looks stageable is such a submodule, don't try to stage it.
Instead unstage if there's anything staged to unstage, so the toggle stays
symmetric; otherwise show an error explaining that there's nothing to stage.
Because the decision is shared, this covers both the stage (space) and
stage-all (a) keybindings.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This map only feeds the optimistic rendering that makes staging feel
instant; it doesn't affect the eventual status, which git reports after
the refresh. The "MM" entry can never be reached for a regular file: a
file at "MM" has stageable unstaged changes, so pressing space stages it
rather than unstaging, and the unstage path is where this map is used. The
only thing that reaches the unstage path at "MM" is a submodule whose
commit is staged on top of dirty content, so this entry exists purely to
update that submodule instantly instead of waiting for the next git
status.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Before the staging decision was unified, the stage (space) and stage-all
(a) keybindings each made their own decision, so a fix to one wouldn't
reach the other. Extend the test to drive the submodule through stage-all
as well, guarding against that asymmetry coming back.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The stage/unstage toggle decides what to do based on whether a node has
unstaged changes: if it does, it stages; otherwise it unstages. For a
submodule this breaks down, because dirty or untracked content inside the
submodule always reports as an unstaged change in the parent repo but can
never be staged from there. Once such a submodule's commit pointer is
staged it sits at "MM", and every subsequent press keeps trying to stage
the unstageable dirty content, so it can never be unstaged.
Treat a submodule's unstaged change as stageable only when its commit
isn't already staged, so that a staged submodule unstages on the next
press regardless of leftover dirty content. Because the decision is now
shared by press and stage-all, this fixes both at once.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
pressWithLock (acting on the selection) and toggleStagedAllWithLock (acting
on the whole tree) each independently decided whether to stage or unstage,
ran the optimistic update, and logged the action. That duplicated decision
has already drifted: the tracked-files filter was added to press months
before it was applied to stage-all, and fixes to one have repeatedly had to
be chased into the other.
Extract that shared decision into toggleStaged, leaving each caller to
supply only the git commands it runs (per-path for the selection, bulk
add -A / reset for the whole tree — the latter is required because the tree
root node has an empty path, so a per-path stage wouldn't work). This is a
pure refactor: the two callers' decisions were already equivalent, so
behavior is unchanged. It exists so the next change to the staging logic
only has to be made once.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When a submodule has both a new commit (which the parent repo can stage)
and dirty working-tree content (which it can't), staging it lands on a
"MM" status. Pressing space again should unstage it, but instead it tries
to stage the dirty content over and over, so you can never get back to an
unstaged state.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Supports loading direnv's environment files (`.envrc`) when switching
repos or worktrees, or when entering or exiting submodules.
There's no configuration for this; the functionality is automatically
enabled when direnv is installed.
Closes#3653.
When a user switches into a repo whose .envrc hasn't been approved with
`direnv allow`, the previous behavior was to drop a "blocked" error
popup and leave the user to fix it externally. That meant opening a
terminal, running `direnv allow`, and then either restarting lazygit or
switching repos and back to refresh the env — easy to get wrong, easy
to forget.
When `direnv export json` exits non-zero, follow up with `direnv status
--json` to ask direnv whether the current directory has a not-yet-
allowed .envrc, and if so, get its path. Then show a confirmation popup
with the .envrc contents inline so the user can read what they're
approving. Confirming runs `direnv allow <path>` and re-runs the load
so the new env reaches subprocesses immediately; cancelling leaves the
env unloaded (the same state as before this commit when direnv refused
to load the .envrc).
Using `direnv status --json` instead of parsing the "is blocked"
stderr line means we rely on direnv's structured output rather than
its human-readable error format, which is more stable across versions
and avoids assumptions about output formatting.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When a user opens a repo from the recent-repos menu or jumps between
worktrees inside lazygit, only the env vars present at process startup
reach subprocesses. That breaks pre-commit hooks and other tools whose
dependencies are pulled in by a per-repo .envrc — users were left with
read-only operations because the env their shell would normally load via
direnv never made it into lazygit's git invocations.
Shell out to `direnv export json` after each chdir and apply the JSON
delta via os.Setenv/Unsetenv. direnv tracks the previous load in its own
DIRENV_DIFF env var, so the delta also unloads vars from the old repo
when entering one without a matching .envrc. If direnv isn't on PATH the
call is a no-op, so users who don't use direnv pay nothing and users who
do need no config to opt in. Any stderr direnv emits (loading messages,
"blocked .envrc" errors, etc.) goes to the command log.
The integration test puts a fake direnv on PATH and asserts that a value
it exports reaches a custom command after switching repos. Wiring this
up needed runner.go to support `{{actualPath}}` placeholders in
ExtraEnvVars, mirroring the existing support for ExtraCmdArgs, so the
test can prepend a fixture-relative directory to PATH.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
If we return the error here, we don't switch repos, but the chdir
happened already, so this would be an inconsistent state (a lot of
lazygit's code assumes that the current directory is always the worktree
root). Only log the error; failing to record the current directory is
not the end of the world.
Also, it is very unlikely to happen; RecordCurrentDirectory only writes
to a small file, and if this fails, then either there is filesystem
corruption of the disk is full, and in both cases the user likely has
much bigger problems.
Commit 4f0393f97b caused a regression: for operations that use
WithWaitingStatusSync (examples are squashing fixups, moving commits up
or down, cherry-picking, creating fixup commits, and more), the waiting
status wouldn't show during the operation; however, it would show after
the operation was done, and then linger forever.
The cause: since 4f0393f97b, layout sizes the bottom line from the
actual content of the AppStatus view rather than from the status
manager. The async render path keeps the view in sync (it sets the
buffer on the first tick and clears it to "" when the status ends), but
the sync path used by WithWaitingStatusSync did not:
- It called ForceLayoutAndRedraw before writing anything to the view, so
layout saw an empty buffer and left no room; the status never appeared
during the operation.
- When the operation finished it just broke out of the loop, leaving the
last spinner frame in the buffer. Every subsequent layout kept reserving
room for that stale content, so the status stuck around forever.
Fix this by writing the status into the view before the initial layout,
and clearing it again when stopping.
Commit 4f0393f97b caused a regression: for operations that use
WithWaitingStatusSync (examples are squashing fixups, moving commits up or down,
cherry-picking, creating fixup commits, and more), the waiting status wouldn't
show during the operation; however, it would show after the operation was done,
and then linger forever.
The cause: since 4f0393f97b, layout sizes the bottom line from the actual
content of the AppStatus view rather than from the status manager. The async
render path keeps the view in sync (it sets the buffer on the first tick and
clears it to "" when the status ends), but the sync path used by
WithWaitingStatusSync did not:
- It called ForceLayoutAndRedraw before writing anything to the view, so layout
saw an empty buffer and left no room; the status never appeared during the
operation.
- When the operation finished it just broke out of the loop, leaving the last
spinner frame in the buffer. Every subsequent layout kept reserving room for
that stale content, so the status stuck around forever.
Fix this by writing the status into the view before the initial layout, and
clearing it again when stopping.
If a keybinding that we want to display in the options bar was set to
`<disabled>` by the user, in pre-0.62 versions we would still display
the command, but with no keybinding. This was arguably not very useful
before, but now it actually crashes because we would now try to display
the first key of the slice of configured keys (crash introduced in
3d18ee8f91). Fix the crash by not showing those commands at all.
This doesn't make a difference for the behavior, it just looks strange to
include the empty bindings first and then filter them out in the next statement.
If a keybinding that we want to display in the options bar was set to <disabled>
by the user, in pre-0.62 versions we would still display the command, but with
no keybinding. This was arguably not very useful before, but now it actually
crashes because we would now try to display the first key of the slice of
configured keys (crash introduced in 3d18ee8f91). Fix the crash by not showing
those commands at all.
Ctrl+s used to be a separate binding confirmInEditor-alt, but now that
it was folded into the main confirmInEditor, we need to mention both
bindings here.
Also use the new syntax while we're at it.
Ctrl+s used to be a separate binding confirmInEditor-alt, but now that it was
folded into the main confirmInEditor, we need to mention both bindings here.
Also use the new syntax while we're at it.
This change enables Lazygit `git-flow` integration to work with
`git-flow-next`. The "official" `git-flow` has been deprecated and
replaced by `git-flow-next`. `got-flow-next` has the same tool and most
of the functionality is compatible but the `git config` is different so
Lazygit doesn't recognise it.
- Support gitflow.branch.<type>.prefix (git-flow-next) in addition to
gitflow.prefix.<type> (legacy)
- Refactor FinishCmdObj to use a prefix map lookup to find the branch
type
git-flow-next (https://github.com/gittower/git-flow-next) uses a
different config schema than legacy git-flow:
gitflow.branch.<type>.prefix instead of gitflow.prefix.<type>.
Recognize both schemas in GetGitFlowPrefixMap by querying each and
merging into a single prefix → branchType map. GitFlowEnabled now
consults the merged map so a next-only setup counts as enabled.
When both schemas configure the same prefix, the legacy entry wins.
In normal usage both schemas agree, so the rule mainly matters as a
deterministic tie-breaker.
Lift the inline parsing in FinishCmdObj into parseGitFlowPrefixMap on
ConfigCommands. The caller now does a direct map lookup against the
parsed prefix → branchType map instead of iterating the raw config
output and suffix-matching. This is preparation for adding git-flow-next
support, which needs to merge a second config schema into the same map.
One incidental change: a branch name without a slash now returns
NotAGitFlowBranch immediately, rather than falling through the
line loop with an empty suffix. Previously a configured
gitflow.prefix.X whose value happened to equal the entire branch
name could match — never a useful outcome.
The previous logic only re-rendered the main view when the side panel itself was
focused. When the user pressed `0` to focus the main view, the
Normal/NormalSecondary context becomes Current and the equality check failed, so
cycling pagers had no visible effect. Mirror the pattern from postRefreshUpdate:
when the main view is focused, call HandleRenderToMain on the side panel below
it on the stack (which CurrentSide already returns).
Keybindings in the user config file can now either be a single string as
before, or a list of strings, in which case the action can be triggered
by any of them.
This has two benefits:
- users can add alternatives that they want to use occasionally. One
example is the `<esc>` key: some users are used to typing it as `ctrl+[`
because this used to be possible in the legacy terminal protocol. With
recent changes to lazygit's keybinding system this no longer works out
of the box, since `<esc>` and `ctrl+[` are now distinct keys that can be
bound separately. But users who want the two to behave the same (as in
the old days) can now do
```yml
keybinding:
universal:
return: [<esc>, "ctrl+["]
```
- we can get rid of all those `XyzAlt` bindings that we used to have,
for cases where we already wanted to have alternate keybindings by
default (for example `<up>`/`<down>` and `j`/`k` for going up and down
in a list). These can now be expressed a lot more elegantly, and require
less code.
The `XyzAlt` bindings are marked as deprecated but they are still
supported. We could instead have added a
migrator that changes users' config files and gets rid of the alt
configs for good already; I decided not to do that, because this would
render the config file invalid for older versions of lazygit, which
would then refuse to start; and that's annoying when bisecting bugs.
We'll keep the deprecated configs in the code for a year or so, and then
add the migrator.
Convert the remaining *Alt/*Alt[12] sibling fields (PrevItem/NextItem,
GotoTop/GotoBottom, PrevBlock/NextBlock, ScrollUpMain/ScrollDownMain,
OptionMenu, ConfirmInEditor, DiffingMenu) so the merge mechanism folds
their values into the corresponding main multi-key binding at config
load. The redundant alt-only Binding registrations across the various
controllers and the global keybindings file are gone: the merged main
field already carries every key, so the for-loop in SetKeybinding
registers them all.
Previously the patch_explorer and merge_conflicts controllers reused
Universal.PrevBlock/NextBlock for moving between hunks (or conflicts) in the
main view, sharing keys with the global side-window cycle. The two operations
are conceptually distinct: cycling side windows is a global navigation gesture,
while next/prev hunk acts on the diff in the main view. Tying them together also
blocks adding <tab>/<backtab> as side- window-cycle keys, because <tab> already
means "toggle panel" in the staging view.
Add Main.PrevHunk/NextHunk to the existing KeybindingMainConfig (which already
groups bindings for the main view across staging, patch building, and merge
conflicts) and switch both controllers to it. The defaults match the active key
set those controllers had before (<left>/<right>/h/l), so the user-visible
behavior is unchanged.
Now that quit accepts multiple keys, the historical quit-alt1 field is
redundant: existing configs that set it should keep working without the user
having to migrate, but the lazygit code shouldn't have to register the alt
binding separately.
Add a merge step that runs after the user config is loaded (and from
NewDummyAppConfig, which the cheatsheet generator and integration tests go
through) folding the alt value into the main key list. Mark QuitAlt1 deprecated
so it disappears from the generated Config.md example, while staying in the JSON
schema with a description so editors can still steer users toward the new form.
Note that instead of marking the alt config as deprecated, we could have added a
migrator that changes users' config files and gets rid of the alt config for
good. I decided not to do that, because this would render the config file
invalid for older versions of lazygit, which would then refuse to start; and
that's annoying when bisecting bugs. We'll keep the deprecated configs in the
code for a year or so, and then add the migrator.
The next commit will fold the remaining ~15 -alt-style fields the same way; the
helper is shaped to keep that mechanical.
CustomCommand.Key and CustomCommandMenuOption.Key are user-configured
keybindings just like the built-in ones. Converting them to the Keybinding type
lets a user assign multiple keys to the same custom command, e.g. `key: [a, b]`,
the same way they would for any other keybinding.
The validator iterates over the elements rather than checking a single string,
the binding registration goes through GetValidatedKeyBindingKeys to register
every alternate, and the existing error messages use .String() so a multi-key
binding renders sensibly.
CustomCommandPrompt.Key (a form field name, not a keybinding) stays a plain
string.
JumpToBlock is special: each of its 5 elements is the binding for one side
window (status / files / branches / commits / stash), not an alternate for a
single command. Change the field from []string to []Keybinding so each window
slot can have alternates of its own.
The schema becomes "an array of 5 keybindings, each itself a string or array of
strings", which falls out cleanly from how the Keybinding type inlines into the
generated schema. Existing configs (a flat array of 5 strings) keep validating
because each element is unmarshalled through Keybinding's scalar-or-sequence
decoder.
Until now every keybinding config field was a plain string. That meant a user
couldn't ask for two keys to invoke a command — the config silently accepted
only one form.
Convert every string-typed field across all 13 KeybindingXxxConfig structs to
Keybinding so the union type extends to every command. Defaults wrap their
single-key value in Keybinding{...} so the generated Config.md still renders one
scalar key per binding.
The alt fields keep their separate Binding registrations for now: this commit
does not yet introduce the merge mechanism that folds them into the main field —
that comes in a follow-up. Consumers previously calling opts.GetKeys on a string
field now call opts.GetKeys on the Keybinding, or take .String() / Keys[0] where
a single value is needed.
Adds a Keybinding.String helper for rendering, schema-generator work that
inlines the Keybinding union into each consuming property, and a unit test
covering the user-facing scalar/sequence YAML forms for quit.
Each user-configurable keybinding is currently a single string in the YAML
config. To let users assign alternate keys to a command, introduce a Keybinding
type that decodes from either a scalar (the existing single-key form, kept for
backward compatibility and for a simpler config file) or a sequence of strings.
Marshalling collapses single-element slices back to a scalar so configs and
generated docs round-trip cleanly.
JSONSchema describes the type as a oneOf union so editors validate either form;
subsequent commits will inline the union into the generated schema and start
using Keybinding as the field type.
The cheatsheet has been showing only the first key of each binding
since Binding.Key became Binding.Keys; collapse the list back into a
single comma-separated cell so users can see all the alternates at a
glance once bindings start carrying more than one key.
This is a pure refactor in preparation for letting users configure multiple
alternate bindings for a single command. Every Binding still has exactly one
key, so nothing changes visibly: the cheatsheet, the on-screen options bar,
and the keybindings menu all render identically.
When a Binding ends up with multiple keys, the on-screen options bar will
show only the first (to avoid clutter); the cheatsheet will show all of them (in
a later commit). For now both paths take Key[0].
MenuItem.Key is changed in the same way, it also has a slice of keys now.
In this commit we keep the name `Key` in Binding, KeybindingOpts and MenuItem,
instead of renaming them to `Keys` right away, in order to keep the diff a bit
more readable. We'll do the rename separately in the next commit.
Constructing a menu item key from a literal character requires
gocui.NewKeyRune('r'), which is a bit noisy. Add a private menuKey helper in
both the controllers and helpers packages so the common case in either reads as
menuKey('r'). Duplicating the one-liner is cheaper than a cross-package import
dependency and avoids forcing every controller file to qualify the call.
The reason for doing this now is that we are going to change MenuItem.Key to a
slice of keys later in the branch, which means we'd have to add `[]gocui.Key{`
at each call site, making them even more noisy. With the menuKey helper we can
just change its signature and leave all clients unchanged.
For legacy reasons, OptionMenu was set to `<disabled>`, and OptionMenuAlt1 to
`?`. This doesn't make a lot of sense any more; get rid of OptionMenuAlt1 and
bind OptionMenu to `?` by default. This is a breaking change for users who
rebound OptionMenuAlt1 in their config, but it doesn't strike me as very likely,
and it's easy enough to fix.
Shell.RunShellCommand was passing os.Environ() to its child, while its
sibling runCommandWithOutputAndEnv has used the minimal
NewTestEnvironment since late 2023 when env isolation was introduced;
the sh path was just missed.
This matters when integration tests run from inside a `git rebase -x`
exec in a linked worktree: git sets GIT_DIR=<main>/.git/worktrees/<name>
for the exec, and it leaks all the way down through bash, just, go test,
and the test process, into every git invocation RunShellCommand spawns.
cmd.Dir becomes irrelevant — git resolves GIT_DIR over cwd-based
discovery, with the work-tree taken from the gitdir file (i.e. the
worktree root). So `git checkout -b conflict` in a test fixture creates
the branch on the real worktree and switches its HEAD, hijacking the
in-progress rebase and trashing the working tree. (In the main worktree
git doesn't set GIT_DIR for rebase exec, which is why the bug was only
visible from linked worktrees.)
Using self.env also incidentally restores GIT_CONFIG_GLOBAL for shell
commands, so commits made via RunShellCommand are now authored by the
test config's CI identity rather than whatever the host's ~/.gitconfig
resolves to.
After fetching, we auto-forward main branches that have fallen behind
their upstream, but skip any that are currently checked out in another
worktree — otherwise we'd update the ref behind that worktree's back,
leaving its working copy showing the inverse of what was just fetched.
The skip check had a hole though: when starting lazygit while no
worktrees have a main branch checked out, leaving it running in the
background, and then checking out a main branch in one of the other
worktrees outside of lazygit (e.g. in a lazygit instance in another
terminal, or using `git checkout` in the shell, or using some other git
client or IDE), then lazygit wouldn't notice the change, and the next
fetch would auto-forward main even though it is now checked out in a
worktree.
The fix is to include `WORKTREES` in the post-fetch refresh scope when
auto-forwarding is enabled. We gate on the config so users with
auto-forward disabled don't pay for an extra `git worktree list` plus
per-worktree rev-parse on every fetch tick.
A few small things picked up along the way landed as separate commits
first:
- Preserve the empty-slice fallback in `loadWorktrees` when `git
worktree list` fails — the fallback was being overwritten by the nil
return value on the next line.
- Add `PULL_REQUESTS` to the manual fetch refresh scope to match the
background fetch; looks like an oversight from when PR support was
added.
- Extract `BranchesHelper.PostFetchRefresh` so the two fetch paths can't
drift again.
Fixes#5020.
AutoForwardBranches relies on the worktree model to skip any branch
that's currently checked out in another worktree (so we don't update
its ref behind the worktree's back). The post-fetch refresh wasn't
including the worktrees scope, so any external change to the worktree
list between lazygit's startup and the fetch — a `git worktree add`,
a `git checkout` in a linked worktree, a branch rename — left the
in-memory model stale and the skip check returned false negatives.
Add WORKTREES to the post-fetch refresh scope when auto-forwarding is
enabled. We gate on the config so users with auto-forward disabled
don't pay for an extra `git worktree list` plus per-worktree rev-parse
on every fetch tick.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When the linked worktree's branch is changed externally — by another
shell, by another tool, or by git running outside lazygit — lazygit's
worktrees model goes stale. The next post-fetch auto-forward then
doesn't realise the branch is now checked out elsewhere, and advances
its ref behind the worktree's back. The worktree's HEAD then resolves
to a commit its index/working tree haven't been updated to, and the
user sees that diff as the inverse of what was fetched — files
appearing as pending changes that they didn't make.
The test sets up a linked worktree initially on a side branch, then
externally checks out master in it before pressing fetch. Two
EXPECTED/ACTUAL pairs capture the symptoms: the branches view shows
master as `✓` rather than `↓1`, and switching to the linked worktree
shows master's would-be incoming file as a pending deletion against
HEAD.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The post-fetch logic was duplicated in `backgroundFetch` and the manual
fetch handler: refresh a fixed set of views, then auto-forward branches
if the fetch succeeded. The two had already drifted on the refresh
scope; folding them into a single helper makes the duplication go
away and prevents it from drifting again.
Pass the fetch error through so we preserve the previous behaviour of
refreshing unconditionally but only auto-forwarding on success.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The background fetch path already includes PULL_REQUESTS in its
post-fetch refresh scope, but the manual fetch from the files view
doesn't. As far as I can tell that's an oversight from when
PULL_REQUESTS was added — there's no reason the two paths should
differ. Align them so both refresh PRs after fetching.
This also sets up the next commit to extract a shared helper for
the post-fetch refresh.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
If `git worktree list` fails, we want the Worktrees model to fall back
to an empty slice so callers iterating over it stay correct. The error
branch was setting it to `[]`, but the line below unconditionally
overwrote it with the nil `worktrees` value from the failed call.
Use an else branch so the empty-slice fallback actually sticks.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Compile them only once at startup. I didn't measure if this makes a difference,
but it's easy to do, and now that we potentially need to check them more often,
it might be worth it.
The services config has been the path for GHE for a while (for the
View-PR-URL feature) but it now does double duty: it's also what enables
the branches-panel PR icons for non-github.com hosts. Worth calling out
explicitly so users don't assume it's still github.com-only.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The branches-panel PR icons only worked for github.com remotes. There was no
fundamental reason — the auth library we already vendor (cli/go-gh) supports
enterprise tokens out of the box (GH_ENTERPRISE_TOKEN, gh auth's keyring),
and the user-facing 'services' config has long been the documented way to
tell lazygit "this domain is a github service" for the View-PR-URL feature.
The fetcher just hardcoded github.com in three places:
- a substring check on the remote URL to decide we're "in a github repo",
- the GraphQL endpoint (always api.github.com/graphql), and
- the auth lookup (always against the default host).
Plumb the resolved web domain through instead. Detection now goes through
the hosting_service ("is this remote's provider 'github'?"), which means a
user with services: { 'git.acme.com': 'github:git.acme.com' } configured
gets PR icons on their GHE remotes too.
Replacing the substring check with a provider check also tightens a latent
bug in getGithubRemotes: it previously accepted any remote whose URL parsed
with the default regex, including gitlab and bitbucket — masked today only
by the InGithubRepo gate, but exposed once the gate goes away.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The github pull-request fetcher needs to know whether a given remote is a
github-type service, which host its API lives on, and which owner/repo to
query against. Today the fetcher hardcodes the first two ("does the URL
contain github.com" and "https://api.github.com/graphql") and re-derives
owner/repo from the remote, which precludes GitHub Enterprise and makes
the fetch entry point take more arguments than it needs.
Add an accessor on the hosting service manager that exposes the already-
resolved service domain together with the parsed owner/repo, so callers
can answer all of these questions without reaching into the manager's
internals.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
After cherry-picking a commit, copying a range-selection of commits was
broken in that it would copy only the last selected commit rather than
all of them.
After a successful paste DidPaste is true, hiding the "X commits copied"
indicator but leaving the buffer populated. From the user's perspective
this looks like a clean slate, so a new shift+C should start fresh. It is
important to reset DidPaste first, before populating the buffer with the new
commits, because otherwise each loop iteration would overwrite the previous one
since Add() rebuilds the set via SelectedHashSet() which returns empty while
DidPaste is set.
After a successful paste, the "X commits copied" indicator hides and
DidPaste is set, but the buffer is not cleared. If the user then
range-selects multiple commits and presses shift+C, every Add() call
rebuilds the set via SelectedHashSet(), which returns empty while
DidPaste is true; each iteration of the copy loop therefore overwrites
the previous one and only the last commit in the range survives.
As a followup to #5571, improve performance for inline spinners too.
This requires a bit of preparation; in particular, we change
ListContextTrait.HandleRender to no longer force a UI layout/redraw, so
callers need to take care of this themselves where needed. This requires
careful testing to see that we didn't miss any situation where redrawing
only worked by accident; see the first commit of the branch for an
example.
Now that HandleRender no longer does an implicit Render(), we can use it inside
OnUIThreadContentOnly to save performance, on the assumption that rerendering a
view that contains an inline spinner never changes the layout.
self.c.Render() at the end of HandleRender was there to schedule a gocui Update
tick so the view content modified above would actually get drawn. For UI-thread
callers (the great majority -- keybinding handlers, the layout function itself,
popup resize, etc.) this was unnecessary work, since gocui already runs a
layout/redraw cycle after every event. SimpleContext.HandleRender doesn't call
Render() either, so this aligns the two implementations.
The few callers that drove HandleRender from a worker goroutine and relied on
Render() for the flush were wrapped in OnUIThread in the preceding commits, so
the implicit Render is no longer needed.
Also, Render() being called *before* setFooter() looks like it might have been a
theoretical race; this is no longer an issue now.
The redraw of the selection color (using <space>) would be tied to the
spinner drawing. To reproduce, having a high spinner refresh rate and
toggling a file would see a delay equivalent to the time spinner refresh
rate.
SetSuggestions has two callers: prepareConfirmationPanel calls it directly on
the UI thread, while editors.promptEditor and
SuggestionsContext.RefreshSuggestions call it via AsyncHandler, which runs the
result closure on a worker goroutine. The worker path currently relies on
HandleRender's self.c.Render() to flush the view update. Wrap the body in
OnUIThread so the worker path stays correct when Render() is removed; for the
UI-thread caller the extra bounce is harmless.
refreshBranches runs on a worker goroutine and re-renders the commits view
directly to refresh the branch-head visualization. As with refreshView, this
currently only flushes because HandleRender ends with self.c.Render(). Wrap the
explicit HandleRender call (along with the LocalCommitsMutex pair around it) in
OnUIThread so it keeps working once Render() is removed.
An async refresh dispatches refreshXyz on a worker goroutine, which then calls
refreshView -> PostRefreshUpdate -> HandleRender. Today the final
self.c.Render() inside ListContextTrait.HandleRender is what triggers a UI flush
from the worker. We're going to remove that Render() call, so prepare by
wrapping refreshView's body in OnUIThread.
This moves the entire rendering of the view (and the ReApplyFilter/ReApplySearch
stuff) to the UI thread, not just the layout. I don't expect this to make a
difference in practice, and it is already one step towards my long-term goal of
moving all view rendering to the UI thread (see
https://github.com/jesseduffield/lazygit/issues/2974#issuecomment-1729154768).
Unrelated to this branch, just because we're touching this code: there's little
reason to set the color on the background thread but the text on the UI thread.
Set them both together on the UI thread. Avoids a data race (unlikely to be a
problem in practice, we're talking about a 64-bit int, but still).
In 0d195077e4 we improved the performance of the status bar spinner by
avoiding a layout. This is fine from one spinner tick to the next, but it's a
problem when spinning starts or ends (or in the hypothetical case that the
status text changes in the middle of the operation, which we never do in
lazygit, but theoretically could). In this case a layout is needed so that the
rest of the status bar gets pushed over appropriately (or moves back to the left
when the spinner ends), and also so that the bottom line is shown or hidden
properly for users who set gui.showBottomLine to false.
To fix this, keep track of the status string width and force a layout whenever
it changes. This includes the beginning and end of an operation when it changes
from empty to non-empty or vice versa.
There is currently no observable misbehavior from this bug, but that's only
because we must have a HandleRender call somewhere that forces a full layout
when an operation starts or ends. We will remove the Render() call from
HandleRender at the end of this branch, at which point the misbehavior would be
visible if we didn't fix it here.
This prevents views from drawing over higher z-order views.
Currently this is not an issue in practice, because we use
ForceFlushViewsContentOnly only for the bottom line status spinner, and there
are never views on top of it. However, later in the branch we will use the
mechanism to redraw the inline spinners in panels (e.g. the "Pushing..." status
next to a branch name), and there could be a popup on top of it.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
With a very slow spinner rate (seconds), you can see that at the beginning of an
operation the bottom line leaves a gap for where the status will go, but the
status (and spinner) is only drawn the first time the spinner ticks. The reason
is that layout looks at GetStatusString to decide how much room to leave, rather
than at the actual content of the AppStatus view; the view content is only set
by renderAppStatus the first time the spinner ticks.
Fix this by making layout look at the actual content of the view so that the
layout is in sync with what is drawn. This also avoids flicker if an operation
is so fast that it finishes before the spinner ticks for the first time,
especially for users who set gui.showBottomLine to false.
### PR Description
This fixes#4734, where lazygit would use a lot of CPU when the spinner
was shown due to redrawing the entire screen every time the spinner
needed a redraw.
The change adds the ability to request a UI redraw without invalidating
the full UI, thus only redrawing the spinner, re-routing the spinner to
this new flow.
CPU usage on a chromebook went from 60% to 5% when the spinner is shown.
Changing the refresh rate of the spinner from 50ms to 200ms brings it
down from 5% to 1% if ever we would like to change the default,
personally I prefer the slower moving spinner, but that's subjective.
This didn't cause a bug so far because switching repos always happens from
within an OnWaitingStatus, so the spinner would take care of calling layout and
draw. However, later in this branch we are going to optimize the spinner so that
it no longer calls layout, at which point this would break, so make sure we
rerender at the point where it's needed.
Our most recent change to the script (58309b02a9) broke it because the
anchored regex's no longer match the beginning of the subject. Fix this
by omitting the hash, which is a bit unfortunate but probably acceptable
(I rarely look at the output of the script anyway).
Our most recent change to the script (58309b02a9) broke it because the
anchored regex's no longer match the beginning of the subject. Fix this by
omitting the hash, which is a bit unfortunate but probably acceptable (I rarely
look at the output of the script anyway).
Modifiers were moved into Key in 22169e22f, but the separate Modifier field
on types.Binding and gocui.keybinding was left behind. The keypress matcher
already compares modifiers via Key.Equals, so the old field is never read on
the dispatch path; it just got passed through SetKeybinding and stored.
Drop it from gocui.keybinding, types.Binding, and the SetKeybinding /
DeleteKeybinding signatures, and remove every now-redundant Modifier:
gocui.ModNone struct field. Mouse bindings keep their own Modifier (on
ViewMouseBinding) since that path still consults it.
I noticed that it compares key.keyName and key.str separately instead of calling
key.Equals, but instead of deciding whether that's a problem, just delete the
function when nobody needs it.
While I strongly prefer the alt-arrow bindings myself, I'm worried that
existing users might not be happy about the change, so I'm reverting it.
I'm working on supporting multiple keybindings for every command, so
once that's in, we can change the default to include both.
While I strongly prefer the alt-arrow bindings myself, I'm worried that existing
users might not be happy about the change, so I'm reverting it.
I'm working on supporting multiple keybindings for every command, so once that's
in, we can change the default to include both.
In the Remotes panel, when selecting a remote that has push URLs, show
them in the main view in addition to the fetch URL(s).
Addresses half of #5566 (just the showing part, not the editing).
The commit graph used '⏣' (U+23E3 BENZENE RING WITH CIRCLE) for merge
commits and '◯' (U+25EF LARGE CIRCLE) for regular commits. Both have
very poor coverage in popular monospace fonts:
- '⏣' lives in the Misc Technical block and is essentially absent from
every common monospace font (Source Code Pro, JetBrains Mono, Fira Code,
Cascadia Code, Hack, Iosevka, Menlo, Consolas, Monaco, IBM Plex Mono,
Ubuntu Mono, Noto Sans Mono, Inconsolata). It is always drawn from a
system fallback font.
- '◯' is the late-addition LARGE CIRCLE codepoint. It is present in some
fonts (Cascadia, Fira Code, Hack, Iosevka, Menlo, Noto Sans Mono) but
missing from many others, including Source Code Pro and most Nerd Font
derivatives based on it.
This is why the graph renders inconsistently across platforms even when
the same monospace font is configured: each OS picks a different
fallback font (Apple Symbols on macOS, Segoe UI Symbol on Windows,
Noto/DejaVu/Symbola on Linux), and the substituted glyphs differ in
shape, weight, and advance width. '◯' is also East Asian Ambiguous
width, so some terminals render it wider than one cell, exaggerating the
misalignment.
Replace the symbols with codepoints from the foundational 1991 Geometric
Shapes block, which has far broader font coverage:
- Merge: '◎' U+25CE BULLSEYE -- concentric circles, the visually closest
cousin to the previous benzene-ring glyph.
- Commit: '○' U+25CB WHITE CIRCLE -- the same hollow-circle silhouette
as before, just a more universally available codepoint.
The new symbols are present in the font directly in significantly more
cases; and when fallback is still required, they are universally
well-drawn (unlike '⏣', which many fallback fonts also lack).
I also considered choosing suitable nerd font symbols for those who are
using nerd fonts, on the assumption that these must work better because
they are guaranteed to be in the font and no fallback font substitution
is necessary; several suitable icons could be considered, e.g.
`nf-cod-circle_large` or `nf-md-circle_double`. Surprisingly, these
didn't work well, and the reason is that (at least in the font I am
using) these are defined with a glyph width that is wider than their
advance width, which means they draw in different sizes depending on
whether they are followed by a space or not. The glyphs we picked above
don't have this problem.
And finally, I considered adding config options so that users with weird
fonts can pick symbols that work well for them. I would like to avoid
having to do this though; ideally we should be able to make a choice
that works well for everybody.
The commit graph used '⏣' (U+23E3 BENZENE RING WITH CIRCLE) for merge
commits and '◯' (U+25EF LARGE CIRCLE) for regular commits. Both have
very poor coverage in popular monospace fonts:
- '⏣' lives in the Misc Technical block and is essentially absent from
every common monospace font (Source Code Pro, JetBrains Mono, Fira
Code, Cascadia Code, Hack, Iosevka, Menlo, Consolas, Monaco, IBM
Plex Mono, Ubuntu Mono, Noto Sans Mono, Inconsolata). It is always
drawn from a system fallback font.
- '◯' is the late-addition LARGE CIRCLE codepoint. It is present in
some fonts (Cascadia, Fira Code, Hack, Iosevka, Menlo, Noto Sans
Mono) but missing from many others, including Source Code Pro and
most Nerd Font derivatives based on it.
This is why the graph renders inconsistently across platforms even
when the same monospace font is configured: each OS picks a different
fallback font (Apple Symbols on macOS, Segoe UI Symbol on Windows,
Noto/DejaVu/Symbola on Linux), and the substituted glyphs differ in
shape, weight, and advance width. '◯' is also East Asian Ambiguous
width, so some terminals render it wider than one cell, exaggerating
the misalignment.
Replace the symbols with codepoints from the foundational 1991
Geometric Shapes block, which has far broader font coverage:
- Merge: '◎' U+25CE BULLSEYE -- concentric circles, the visually
closest cousin to the previous benzene-ring glyph.
- Commit: '○' U+25CB WHITE CIRCLE -- the same hollow-circle silhouette
as before, just a more universally available codepoint.
The new symbols are present in the font directly in significantly
more cases; and when fallback is still required, they are universally
well-drawn (unlike '⏣', which many fallback fonts also lack).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Windows cannot remove files while handles are still open. In
TestOSCommandFileType we created files and immediately called RemoveAll without
closing handles, which left untracked artifacts (e.g. "testFile" and "file with
spaces") in the working tree. Close the handles and assert RemoveAll succeeds so
cleanup failures are visible.
The call was meant to guarantee a UTC time zone to make the tests deterministic,
but as the previous commit explained, this only worked on Mac and Linux, not on
Windows. Since we now have a better fix, this workaround is no longer needed.
The "custom time format" test case of TestGetCommitListDisplayStrings failed on
Windows. Root cause: UnixToDateSmart used time.Unix(timestamp, 0), which formats
in process-local time. In tests we pass an explicit 'now' (often UTC), but the
timestamp was rendered in Local, causing one-hour drift on non-UTC machines.
The test tried to work around this by doing os.Setenv("TZ", "UTC"); however,
this only worked on Mac and Linux. On Windows, it has no effect because Windows
uses registry-based timezone configuration, not TZ environment variables.
Change: convert the timestamp into now.Location() before both the same-day
comparison and formatting.
Why this is safe: callers already define the presentation timezone via the 'now'
argument (typically time.Now() in app code, controlled time in tests). This
aligns timestamp rendering with that caller intent and removes dependence on
global TZ state or OS-specific environment variable behavior.
Added regression tests for UTC and UTC+1 to ensure deterministic behavior across
all platforms.
In the event that LC_ALL was set, for example, the tests would fail as
it takes precedence over LANG.
Tiny change that prevents language tests from failing if LC_ALL is set
(I also added LC_MESSAGES but I am not sure if that's also needed, from
what I read it also takes precedence) so I did not open an issue prior,
hopefully that's ok!
These have alternate keys (`<ctrl+h>` for backspace, and `<ctrl+f>` for
move-cursor-right). Both of these broke with commit 22169e22ffc46c5; the
first because it was accidentally omitted, the second because of a
stupid copy/paste mistake.
These have alternate keys (<ctrl+h> for backspace, and <ctrl+f> for
move-cursor-right). Both of these broke with commit 22169e22ffc46c5; the first
because it was accidentally omitted, the second because of a stupid copy/paste
mistake.
In #5563 we started to support an alternative syntax for keybindings:
instead of `<c-a>` you could say `<ctrl+a>`, which is easier to read
especially when there are multiple modifiers (`<ctrl+shift+x>` instead
of `<c-s-x>`). In this PR we make this new syntax the default.
Make the edit keybindings for "move-by-word" and "backspace-word"
platform-dependent so that they are with ctrl on Windows and Linux, but
alt on Mac. These are the common conventions on these platforms. Also,
make them configurable so that user who can't get used to the change can
map it back to what they were.
Add a "forward-delete-word" keybinding, bound to alt-delete on Mac, and
ctrl-delete on Windows and Linux.
Revamp lazygit's keybinding mechanism to support richer keybindings for
those terminals that support the newer keyboard protocols. This makes it
possible to use keybindings such as `ctrl-alt-shift-x`.
Change the default keybindings for moving commits up and down from
`ctrl-k`/`ctrl-j` to `alt-up`/`alt-down`; this is mostly for personal
preference, I find them easier to remember, and they are nicely similar
to moving a line of code up and down in many code editors. Also, change
the default binding for submitting a commit from the commit description
editor from `alt-enter` to `command-enter` on Mac, or `ctrl-enter` on
Linux and Windows; these are the same bindings that are used in many
multi-line edit field situations, e.g. in GitHub comments.
See docs/keybindings/Custom_Keybindings.md for caveats about terminal
compatibility.
The previous version only enumerated the supported (non-rune) bindings.
Replace it with a description of the syntax: how to spell single-rune
keys, special keys, and modified keys; how to combine modifiers; the
keyword forms for `<space>`, `<minus>`, `<plus>`; and which combinations
are rejected because terminals can't deliver them.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
This changes not only how we store modifiers (inside of Key instead of passing
it separately), but also how we parse keybinding strings: it supports all
combinations of modifiers now (if the terminal supports it, that is).
An uppercase letter is not valid with ctrl, and only works because we lowercase
the string before parsing it. This will change later in this branch when we
start supporting bindings like <c-s-r>.
Refactor code to introduce a Key type in gocui that bundles the keyName
and a rune, so that we don't have to pass these around separately
everywhere.
This, and updating tcell to v3 lays the ground for supporting more
keybindings in terminals that support the CSIu keyboard protocol.
This bundles the keyName and a rune, so that we don't have to pass these around
separately everywhere. This should make it easier to swap out the rune for a
string when we upgrade to tcell v3.
Over the past few months or even years, [Jesse's gocui
fork](https://github.com/jesseduffield/gocui) has become more and more
tied to lazygit; I have repeatedly made API-breaking changes to it
without caring much about what this means for other clients like
lazydocker or lazynpm (and Jesse was ok with that).
Given that situation, it no longer makes much sense to maintain it in a
standalone repo, so copy it into lazygit; this will greatly reduce the
friction of making changes to it. If/when the time comes to update those
other clients to also benefit from the improvements we make here, we can
always copy the files back to the gocui fork and resume it there.
I copied all files except dot files (.github and .gitignore), the _examples
folder, and go.mod/go.sum.
At some point we may want to copy the files back to the gocui repo when other
clients (e.g. lazydocker) want to use the newer versions of them.
### PR Description
Instead of manually figuring out how much ahead each branch is from it's
upstream branch, use [for-each-ref
ahead-behind](https://git-scm.com/docs/git-for-each-ref/2.41.0#Documentation/git-for-each-ref.txt-ahead-behindcommittish)
if supported by the git binary.
On my Windows machine, using the lazygit repo with all 61 branches
created locally, it goes from ~8.5s to ~200ms.
It was also able to find a base branch for `assets` which the previous
iteration did not.
Fixes#5532
This is so that they look the same no matter what color palette the
terminal is using. (One user complained that the text for the Open state
is barely readable, because they are using a palette that has a very
pale green.)
GitHub uses slightly different colors depending on light vs. dark mode;
fortunately they are very close, so hopefully we can ignore this. I
picked the ones for dark mode here, on the assumption that this is more
common.
Also, not all terminals support true hex colors; for example,
Terminal.app on macOS doesn't, so it maps the colors to the closest ones
in the Xterm-256 palette. This shouldn't be a huge problem, but for some
reason it displays draft PRs as something closer to Cyan than grey, and
I don't understand why.
This is so that they look the same no matter what color palette the terminal is
using. (One user complained that the text for the Open state is barely readable,
because they are using a palette that has a very pale green.)
GitHub uses slightly different colors depending on light vs. dark mode;
fortunately they are very close, so hopefully we can ignore this. I picked the
ones for dark mode here, on the assumption that this is more common.
Also, not all terminals support true hex colors; for example, Terminal.app on
macOS doesn't, so it maps the colors to the closest ones in the Xterm-256
palette. This shouldn't be a huge problem, but for some reason it displays draft
PRs as something closer to Cyan than grey, and I don't understand why.
If the repo has multiple remotes, but only one of them is on Github (the
others might for example point to a self-hosted Critic server or
something like that), lazygit would still present a menu to choose the
remote for pull requests, but it would contain only that single entry.
That's pointless, pick it automatically without prompting.
If the repo has multiple remotes, but only one of them is on Github (the others
might for example point to a self-hosted Critic server or something like that),
lazygit would still present a menu to choose the remote for pull requests, but
it would contain only that single entry. That's pointless, pick it automatically
without prompting.
We add some tests while we're at it; these wouldn't have caught the problem,
because they only test getGithubBaseRemote which already takes the filtered
github remotes. It's still better than not having any tests; the real issue
could only have been caught with an integration test, which we don't bother
adding.
If we used to have a base remote (e.g. because there was only one), but
now we don't (e.g. because the user has added a second one, and we don't
know yet which one is the base), stop showing the cached PRs. This is
especially important in the case that the user cancels the prompt, in
which case we don't have a base remote for the rest of the session, but
would keep showing the (potentially stale) cached PRs forever.
You might ask why we don't retain the previous base remote in the case
that we used to have one but no longer do; this may be possible, but
it's error-prone because the user might have shuffled their remotes
around and changed their names. I don't think it's worth the risk.
If we used to have a base remote (e.g. because there was only one), but now we
don't (e.g. because the user has added a second one, and we don't know yet which
one is the base), stop showing the cached PRs. This is especially important in
the case that the user cancels the prompt, in which case we don't have a base
remote for the rest of the session, but would keep showing the (potentially
stale) cached PRs forever.
This is useful when cancelling out of the commit panel mid-sentence
(after having typed the space for the next word); when entering the
commit message panel again, the space was gone and you had to type it
again. Small thing, but it just seems better to resume the panel in
exactly the state that you left it in. (Which we actually don't do; we
don't remember the cursor position, or which of the subject/description
panels was active. That would be a separate improvement.)
Fixes#5519.
This is useful when cancelling out of the commit panel mid-sentence (after
having typed the space for the next word); when entering the commit message
panel again, the space was gone and you had to type it again. Small thing, but
it just seems better to resume the panel in exactly the state that you left it
in. (Which we actually don't do; we don't remember the cursor position, or which
of the subject/description panels was active. That would be a separate
improvement.)
The save path and the load path used to be asymmetric. On save, the textarea
getters applied strings.TrimSpace, which stripped any leading blank lines, a
trailing newline after the cursor, or indentation on the very first line of the
description — all of which are legitimate user content. On load,
SplitCommitMessageAndDescription did TrimSpace on the description as well, and
the preserved message was routed through that same git-format split because
HandleCommitPress passed it as OpenCommitMessagePanel's InitialMessage. The
result: every round-trip through "escape and reopen" silently mutated the
message.
The fix is to treat our own preservation file as its own format, distinct from
git's canonical "summary\n\nbody" format:
- The textarea getters return raw content. strings.TrimSpace moves to the one
place that still needs it: the empty-summary check in HandleCommitConfirm (git
itself strips trailing whitespace and blank lines, so no pre-trim is needed
before -m).
- SplitPreservedCommitMessage / SetPreservedMessageInView split on the single
"\n" our Join uses, without any trimming — truly lossless.
- SplitCommitMessageAndDescription keeps its git-format behavior but replaces
TrimSpace with TrimPrefix("\n"), so it strips only the blank-line separator
and leaves body indentation intact.
- HandleCommitPress now mirrors HandleWIPCommitPress: it no longer passes the
preserved message as InitialMessage. OpenCommitMessagePanel resolves the
preserved content itself, uses it for display via the preservation-format
setter, and stores it as the initial message so the close-time "did the user
change anything?" check still correctly detects a cleared panel.
- GetInitialMessage no longer trims. With raw getters on both sides of the
comparison, trimming here caused spurious non-matches (e.g. for preserved
content with trailing whitespace). The original motivation — matching a
"WIP: " prefix with trailing space — works unchanged.
- UpdateCommitPanelView becomes dead code and is removed; its one remaining
caller (history cycling, always git-format) goes directly through
SetMessageAndDescriptionInView.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Callers currently hand this function a trimmed description, so the output is
always clean. An upcoming change to the commit-panel getters will stop trimming
at the callsite (so that whitespace typed by the user round-trips through the
preservation file exactly), at which point the description can end with one or
more newlines. Without this change, a user who presses Enter after their
description body and then invokes "Add co-author" would end up with two blank
lines between the body and the trailer instead of the expected one.
Git's --grep option uses Basic Regular Expression syntax by default, which means
that the `[^\n]*` didn't do what was intended; it means "any character except
`\` or the literal letter `n`" — not "any character except newline."
Besides, `^` matched any line start, not only the start of the entire message,
so "any character except newline" would have been wrong anyway. Given this, the
script matched commits that have WIP or DROPME in the body, which is not what we
want. (The last commit of this branch is an example for that.)
Fix this by listing only the subject lines and grepping them outside of git;
this also lets us use a slightly simpler regex (we want to match WIP anywhere in
the subject).
This isn't possible with the default quit binding ('q'), but there's an
alternative binding (ctrl-c) that does work while the panel is open;
also, users can rebind quit to something like ctrl-q.
Fixes#5513.
This isn't possible with the default quit binding ('q'), but there's an
alternative binding (ctrl-c) that does work while the panel is open; also, users
can rebind quit to something like ctrl-q.
We'll want to call just the preservation step when the app is quitting
with the commit message panel open: at that point the view-hiding and
context-popping in CloseCommitMessagePanel are pointless (the app is
about to exit), and some of the focus-lost side effects could be
surprising during teardown.
There's no reason for this; when opening the panel next time, it will be
populated again. Also, it doesn't make sense to do this only when not preserving
the message.
Related to #5124
## Changes
- Extended existing retry logic to handle transient ref lock errors
- Added retry for "cannot lock ref" and "cannot update ref" error
messages
- Extracted retryable error check into helper function for clarity
These errors can occur intermittently during fetch/pull operations on
large repositories and typically succeed on retry.
Extends the existing retry logic to handle transient lock-related errors beyond just .git/index.lock. This now also retries when encountering "cannot lock ref" or "cannot update ref" errors, which can occur intermittently during fetch/pull operations in large repositories.
Related to #5124
Signed-off-by: majiayu000 <1835304752@qq.com>
Change the tests so that they run in a linked worktree; this uncovers the bug
that copying a file's absolute path uses the main repo path rather than the
worktree's path.
When no base repository is configured using gh, we have several
heuristics for choosing a likely base repo before prompting the user.
One of these was that if the origin remote exists, we'd choose that.
This may be the right choice in some cases, but in many others it's not;
for example, in the common scenario of a forking setup where the
upstream repo's remote is called after its owner, and the fork remote is
called origin, we would choose origin as the base repo, which results in
not showing any PRs. Don't do that, and instead prompt the user for the
base repo in this case.
When no base repository is configured using gh, we have several heuristics for
choosing a likely base repo before prompting the user. One of these was that if
the origin remote exists, we'd choose that. This may be the right choice in some
cases, but in many others it's not; for example, in the common scenario of a
forking setup where the upstream repo's remote is called after its owner, and
the fork remote is called origin, we would choose origin as the base repo, which
results in not showing any PRs. Don't do that, and instead prompt the user for
the base repo in this case.
The assumption is that if a pull request exists on a main branch, it was
usually created by mistake and then closed, and showing it serves no
purpose and is only distracting.
We keep showing _open_ pull requests for main branches though, because
this allows you to notice that there is one that you probably want to
close.
This only affects the display (in the branches list and in the main
view); opening the PR in the browser using shift-G is still possible, as
is copying its URL to the clipboard.
The assumption is that if a pull request exists on a main branch, it was usually
created by mistake and then closed, and showing it serves no purpose and is only
distracting.
We keep showing open pull requests for main branches though, because this allows
you to notice that there is one that you probably want to close.
This only affects the display (in the branches list and in the main view);
opening the PR in the browser using shift-G is still possible, as is copying its
URL to the clipboard.
### PR Description
Close#5494
Normalizes the repository owner to lowercase during the PR mapping.
This ensures that PR icons and integration features work correctly even
when the local git remote URL casing differs from the official
repository casing on GitHub.
Normalizes the repository owner to lowercase during the PR
mapping.
This ensures that PR icons and integration features work correctly even
when the local git remote URL casing differs from the official
repository casing on GitHub.
Just (https://just.systems/) works better than make for running
commands. For example, passing arguments to `make integration-test-cli`
requires a `--` between make's arguments and the cli test runner's
arguments (e.g. -sandbox), and will also result in weird errors. Just
doesn't have any of these problems.
I chose different target names than we use in the Makefile; the goal is
to have better tab completion, where the most commonly used commands can
be completed after typing a single letter. That's why I use "e2e" for
integration tests, which is not a term we use anywhere else.
Keeping the Makefile around for those who are used to it, and are too
lazy to install just.
Just (https://just.systems/) works better than make for running commands. For
example, passing arguments to `make integration-test-cli` requires a `--`
between make's arguments and the cli test runner's arguments (e.g. -sandbox),
and will also result in weird errors. Just doesn't have any of these problems.
I chose different target names than we use in the Makefile; the goal is to have
better tab completion, where the most commonly used commands can be completed
after typing a single letter. That's why I use "e2e" for integration tests,
which is not a term we use anywhere else.
Keeping the Makefile around for those who are used to it, and are too lazy to
install just.
## Summary
Fix high severity security issue in `.github/workflows/release.yml`.
## Vulnerability
| Field | Value |
|-------|-------|
| **ID** |
yaml.github-actions.security.run-shell-injection.run-shell-injection |
| **Severity** | HIGH |
| **Scanner** | semgrep |
| **Rule** |
`yaml.github-actions.security.run-shell-injection.run-shell-injection` |
| **File** | `.github/workflows/release.yml:113` |
**Description**: Using variable interpolation `${{...}}` with `github`
context data in a `run:` step could allow an attacker to inject their
own code into the runner. This would allow them to steal secrets and
code. `github` context data can have arbitrary user input and should be
treated as untrusted. Instead, use an intermediate environment variable
with `env:` to store the data and use the environment variable in the
`run:` script. Be sure to use double-quotes the environment variable,
like this: "$ENVVAR".
## Changes
- `.github/workflows/release.yml`
## Verification
- [x] Build passes
- [x] Scanner re-scan confirms fix
- [x] LLM code review passed
---
*Automated security fix by [OrbisAI Security](https://orbisappsec.com)*
When building multi-step custom command forms, some prompts are only
relevant depending on earlier answers. Without conditional logic, users
must dismiss irrelevant prompts manually.
Prompts now accept a `condition` field with a template expression
evaluated against prior form values. Skipped prompts default to an empty
string.
When building multi-step custom command forms, some prompts are only
relevant depending on earlier answers. Without conditional logic,
users must dismiss irrelevant prompts manually.
Prompts now accept a `condition` field with a template expression
evaluated against prior form values. Skipped prompts default to
an empty string.
The template expression is a string pre- and suffixed with double curly
braces - {{}}.
Form keys can be reused, a guard ensures that skipped prompts do not
reset already set form keys with an empty string. This allows the
conditional flow to remind a user to set a key that was left empty
because additional conditions want that key to be set. This removes the
need to have additional if checks in the command that uses the form
keys.
This makes it easier to recover them if they were deleted accidentally.
We only do this for local branches for now, we don't bother for remote
branches; it would be trickier there, because the branch on the server
might not actually point to the same hash as our local remote tracking
branch does.
Fixes#2468.
This makes it easier to recover them if they were deleted accidentally.
We only do this for local branches for now, we don't bother for remote branches;
it would be trickier there, because the branch on the server might not actually
point to the same hash as our local remote tracking branch does.
Bumps [github.com/spkg/bom](https://github.com/spkg/bom) from
0.0.0-20160624110644-59b7046e48ad to 1.0.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/spkg/bom/releases">github.com/spkg/bom's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.1</h2>
<p>Update to later version of go, remove CI that no longer works</p>
<h2>v1.0.0</h2>
<p>Add support for Go modules.</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/spkg/bom/commits/v1.0.1">compare view</a></li>
</ul>
</details>
<br />
Bumps [github.com/adrg/xdg](https://github.com/adrg/xdg) from 0.4.0 to
0.5.3.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/adrg/xdg/releases">github.com/adrg/xdg's
releases</a>.</em></p>
<blockquote>
<h2>v0.5.3</h2>
<h3>Changelog</h3>
<ul>
<li>Updated <code>xdg.SearchRuntimeFile</code> to also look in the
operating system's temporary directory for runtime files.
This covers unlikely cases in which runtime files cannot be written
relative to the base runtime directory either because it does not exist
or it is not accessible, so <code>xdg.RuntimeFile</code> suggests the
operating system's temporary directory as a suitable fallback
location.</li>
</ul>
<h3>Internal</h3>
<ul>
<li>Improved package testing.</li>
</ul>
<h2>v0.5.2</h2>
<h3>Changelog</h3>
<ul>
<li>
<p>Updated logic of <code>xdg.RuntimeFile</code>: due to the special
nature of the <code>runtime directory</code>, the function no longer
attempts to create it if it does not exist. If that's the case, the
function uses the operating system's <code>temporary directory</code> as
a fallback. The function still creates subdirectories relative to the
base runtime directory or its fallback.</p>
<p>Justification: the creation of the runtime directory is not in the
scope of this package as it has special requirements defined by the <a
href="https://specifications.freedesktop.org/basedir-spec/latest">XDG
Base Directory Specification</a>. Relevant excerpt:</p>
<blockquote>
<p>The lifetime of the directory MUST be bound to the user being logged
in. It MUST be created when the user first logs in and if the user fully
logs out the directory MUST be removed. If the user logs in more than
once they should get pointed to the same directory, and it is mandatory
that the directory continues to exist from their first login to their
last logout on the system, and not removed in between. Files in the
directory MUST not survive reboot or a full logout/login cycle.</p>
</blockquote>
<p>Also, on <code>Linux</code>, the parent directories of the default
user runtime directory are owned by the root user so they cannot be
created by a regular user. <a
href="https://www.freedesktop.org/software/systemd/man/latest/pam_systemd.html">pam_systemd</a>
is usually responsible for creating the runtime directory
(<code>/run/user/$UID</code>).</p>
</li>
</ul>
<h2>v0.5.1</h2>
<h3>Changelog</h3>
<ul>
<li>Added support for the non-standard <code>XDG_BIN_HOME</code> base
directory.
See <a
href="https://github.com/adrg/xdg?tab=readme-ov-file#xdg-base-directory">XDG
base directories</a> README section for more details.</li>
<li>Added more config and data search locations on <code>macOS</code>.
<ul>
<li>Added <code>~/.config</code> at the end of the list of default
locations for <code>XDG_CONFIG_DIRS</code>.</li>
<li>Added <code>~/.local/share</code> at the end of the list of default
locations for <code>XDG_DATA_DIRS</code>.</li>
</ul>
</li>
<li>Added more application search locations on <code>Windows</code>:
<ul>
<li><code>%ProgramFiles%</code></li>
<li><code>%ProgramFiles%\Common Files</code></li>
<li><code>%LOCALAPPDATA%\Programs</code></li>
<li><code>%LOCALAPPDATA%\Programs\Common</code></li>
</ul>
</li>
</ul>
<h3>Internal</h3>
<ul>
<li>Updated <code>golang.org/x/sys</code> dependency to the latest
version.</li>
<li>Improved package testing.</li>
</ul>
<h2>v0.5.0</h2>
<h3>Changelog</h3>
<ul>
<li><code>user-dirs.dirs</code> config file is now parsed on Unix-like
operating systems (except for macOS and Plan 9).
See <a
href="https://github.com/adrg/xdg?tab=readme-ov-file#xdg-user-directories">XDG
user directories</a> README section for more details.</li>
<li>Updated <code>golang.org/x/sys</code> dependency to the latest
version.</li>
</ul>
<h4>Internal</h4>
<ul>
<li>Moved all path related functionality in internal
<code>pathutil</code> package.</li>
<li>Added internal <code>userdirs</code> package:
<ul>
<li>Moved <code>xdg.UserDirectories</code> to
<code>userdirs.Directories</code>.</li>
<li>Added parsing functions for <code>user-dirs.dirs</code> config
file.</li>
</ul>
</li>
<li>Improved package testing.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/adrg/xdg/commit/aa865a51a1b35fd06925fd6b8604991e79e3167e"><code>aa865a5</code></a>
Merge pull request <a
href="https://redirect.github.com/adrg/xdg/issues/101">#101</a> from
adrg/update-search-runtime-file</li>
<li><a
href="https://github.com/adrg/xdg/commit/71a81eccf3e9ac9ebf03e8c11ca3ed60a06eac7f"><code>71a81ec</code></a>
Minor xdg.SearchRuntimeFile function documentation update</li>
<li><a
href="https://github.com/adrg/xdg/commit/88111eba52ac2a211b97194266db5207c975c266"><code>88111eb</code></a>
Minor example update in README.md and doc.go</li>
<li><a
href="https://github.com/adrg/xdg/commit/d9f76be86d944bf2b9bdb8544952111e2533f3ad"><code>d9f76be</code></a>
Improve non-existent runtime directory test case</li>
<li><a
href="https://github.com/adrg/xdg/commit/800775a49c0a7877af5dca22104b90dc7e788cd0"><code>800775a</code></a>
Update xdg.SearchRuntimeFile to also look in temporary directory</li>
<li><a
href="https://github.com/adrg/xdg/commit/2335a687b19a49dafb193856d64d911d33c4b3c1"><code>2335a68</code></a>
Merge pull request <a
href="https://redirect.github.com/adrg/xdg/issues/99">#99</a> from
adrg/improve-runtime-file</li>
<li><a
href="https://github.com/adrg/xdg/commit/221e50698e5b31d277289e971f645299279efdd5"><code>221e506</code></a>
Minor non-existent runtime directory test case fix on macOS</li>
<li><a
href="https://github.com/adrg/xdg/commit/9bbb6024b2e9ee213bbed1f63ae8ea6063767d5b"><code>9bbb602</code></a>
Minor error format improvement in pathutil.Create and
pathutil.Search</li>
<li><a
href="https://github.com/adrg/xdg/commit/987b3ce5c440036b799a21a633a699be91530d0a"><code>987b3ce</code></a>
Minor README.md update</li>
<li><a
href="https://github.com/adrg/xdg/commit/3c39d559725cf005c392630100f4f338b49daf24"><code>3c39d55</code></a>
Add non-existent runtime directory test case</li>
<li>Additional commits viewable in <a
href="https://github.com/adrg/xdg/compare/v0.4.0...v0.5.3">compare
view</a></li>
</ul>
</details>
<br />
- **PR Description**
If the user has `gh` installed and is logged in (`gh auth login`),
lazygit shows GitHub PR icons next to the names of branches that have an
associated PR, colored by the PR's status (green=open, red=closed,
purple=merged).
Selecting a branch and pressing `shift-G` opens the PR in the browser.
For esthetic reasons, checking out a branch (or other ref) blocks the UI until
the refresh is done, so it's important that the refresh doesn't do unnecessary
work. Refreshing pull requests is unnecessary (but costly, when waiting for it)
when a branch is checked out that already existed locally. However, it is
required when checking out a remote branch for the first time, so that the PR
icon appears immediately when there is one.
For the branches panel we might consider unifying it with the existing `o`
command for creating a PR: it could check if there is a PR already, and open it
if so, or create a new one if not.
However, I also want the command in the local commits panel for the checked out
branch, and there's no existing "Create PR" command there; and the `o` command
opens the selected commit in the browser, so it's unrelated.
Add GitHubCommands struct with GraphQL-based PR fetching, and
GithubPullRequest model. Wire HostingService and GitHub command
structs into GitCommand.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
Extract parseRemoteUrl helper to avoid duplication between
getRepoURLFromRemoteURL and new getRepoNameFromRemoteURL.
Add repoNameTemplate to ServiceDefinition and GetRepoName() to
HostingServiceMgr. Add GetRepoInfoFromURL for callers that need
owner/repo without a full service lookup.
The only information that this carries is whether an entry is a real branch or a
detached head. Detached heads can only be at the top, and they are easy to tell
apart from the other branches by their name, so the icon is not really very
useful.
We are going to show PR icons in this column.
Not a terribly important feature for users, probably, but it is useful for
developers when testing a new feature with or without nerd fonts; and it does go
against or policy of all configs being hot-reloadable.
Note that switching from nerd fonts version 2 to 3 is *not* supported without
restarting, but I find this less important.
This isn't a valid key, and according to claude it's not possible to configure
it to get only security updates (I'm too lazy to read the docs). I suppose this
means we will now get pull requests for any updated dependencies, but maybe
that's useful; we'll see how annoying this gets.
Re-submission of #5422. Had a problem with my fork and had to delete it,
which closed the original PR. Apologies for the noise.
## Summary
This PR pins all GitHub Actions to immutable commit SHAs and extracts an
inline secret from a `run:` block into an `env:` mapping.
- Pin 7 unpinned actions to full 40-character SHAs
- Extract 1 inline secret from run block to env var
## How to verify
Review the diff, each change is mechanical and preserves workflow
behavior:
- **SHA pinning**: `action@v3` becomes `action@abc123 # v3`, original
version preserved as comment
- **Secret extraction**: `${{ secrets.* }}` in `run:` moves to `env:`
block, referenced as `"${ENV_VAR}"` in the script
- No workflow logic, triggers, or permissions are modified
I've been researching CI/CD supply chain attack vectors and submitting
fixes to affected repos. Based on that research I built a scanner called
Runner Guard and open sourced it
[here](https://github.com/Vigilant-LLC/runner-guard) so you can scan
yourself if you want to. I'll be posting more advisories over the next
few weeks [on Twitter](https://x.com/vigilance_one) if you want to stay
in the loop.
If you have any questions, reach out. I'll be monitoring comms.
\- Chris (dagecko)
### PR Description
It actually expect `branch.<name>.*`
`man git-config | rg "\s+branch\.\S+\$"` to show all possible keys.
```
panic: runtime error: slice bounds out of range [7:6]
goroutine 57 [running]:
github.com/jesseduffield/lazygit/pkg/commands/git_commands.(*ConfigCommands).Branches(0x110187428260, {0x15495d0, 0x110187190230})
lazygit/pkg/commands/git_commands/config.go:104 +0x8ef
github.com/jesseduffield/lazygit/pkg/commands/git_commands.(*BranchLoader).Load(0x1101873e6180, {0x1d77440, 0x0, 0x0}, 0x1101873e86e0, {0x0, 0x0, 0x0}, 0x1, 0x1101872a5e60,
...)
lazygit/pkg/commands/git_commands/branch_loader.go:121 +0x7cc
github.com/jesseduffield/lazygit/pkg/gui/controllers/helpers.(*RefreshHelper).refreshBranches(0x1101871ef1c0, 0x1, 0x0, 0x1)
lazygit/pkg/gui/controllers/helpers/refresh_helper.go:456 +0x328
github.com/jesseduffield/lazygit/pkg/gui/controllers/helpers.(*RefreshHelper).Refresh.func2.3()
lazygit/pkg/gui/controllers/helpers/refresh_helper.go:131 +0x45
github.com/jesseduffield/lazygit/pkg/gui/controllers/helpers.(*RefreshHelper).Refresh.func2.1.1({0x154b438, 0x110187b12260})
lazygit/pkg/gui/controllers/helpers/refresh_helper.go:106 +0x30
github.com/jesseduffield/gocui.(*Gui).onWorkerAux(0x110187278b40, 0x110187a92190, {0x154b438, 0x110187b12260})
lazygit/vendor/github.com/jesseduffield/gocui/gui.go:713 +0x8b
github.com/jesseduffield/gocui.(*Gui).OnWorker.func1()
lazygit/vendor/github.com/jesseduffield/gocui/gui.go:700 +0x3f
created by github.com/jesseduffield/gocui.(*Gui).OnWorker in goroutine 1
```
### Please check if the PR fulfills these requirements
* [x] Cheatsheets are up-to-date (run `go generate ./...`)
* [x] Code has been formatted (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#code-formatting))
* [ ] Tests have been added/updated (see
[here](https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md)
for the integration test guide)
* [x] Text is internationalised (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#internationalisation))
* [x] If a new UserConfig entry was added, make sure it can be
hot-reloaded (see
[here](https://github.com/jesseduffield/lazygit/blob/master/docs/dev/Codebase_Guide.md#using-userconfig))
* [x] Docs have been updated if necessary
* [x] You've read through your own file changes for silly mistakes etc
Add new config options for the sort order of files vs. directories, and
for sorting case sensitively or not.
Set the sort order's default from the former foldersFirst to mixed, so
this is a change in behavior. I find this useful because it now matches
git's order, so if you look at the diff of a commit, the TOC at the top
has the same order as the file tree you see when entering the commit.
Closes#4070.
Set the sort order's default from the former foldersFirst to mixed, so this is a
change in behavior. I find this useful because it now matches git's order, so if
you look at the diff of a commit, the TOC at the top has the same order as the
file tree you see when entering the commit.
When you rebase a branch and there are conflicts, lazygit asks you to
continue the rebase when it detects that all conflicts have been
resolved. However, it is common to make additional changes beyond just
fixing the conflicts (e.g. to fix build failures), and when doing that
while the "Continue the rebase?" prompt is showing, lazygit detects that
too and asks you if you want to stage those newly modified files too.
This is all well and good (and can be disabled for those who don't like
it); however, lazygit would treat out-of-date submodules as unstaged
changes and would offer to stage those as well, and this is pretty bad
and almost never what you want. Fix this by excluding submodules from
that second check.
When you rebase a branch and there are conflicts, lazygit asks you to continue
the rebase when it detects that all conflicts have been resolved. However, it is
common to make additional changes beyond just fixing the conflicts (e.g. to fix
build failures), and when doing that while the "Continue the rebase?" prompt is
showing, lazygit detects that too and asks you if you want to stage those newly
modified files too. This is all well and good (and can be disabled for those who
don't like it); however, lazygit would treat out-of-date submodules as unstaged
changes and would offer to stage those as well, and this is pretty bad and
almost never what you want. Fix this by excluding submodules from that second
check.
This is the same option as used by
pkg.commands.git_commands.diff.GetDiff().
This fixes some operations patch operation (tested with moving patch to
another commit) with `git config set --global color.ui always` (or
`color.diff always`).
The README says that this keybinding is ctrl+z, but the default
keybinding is shift+z — looks like this was changed in
376ca65807.
This PR updates the shortcut in the README to match the current
keybinding.
Previously, when showing subcommits of a branch or tag, scrolling down,
and then going out and entering subcommits again, it would select the
first commit but keep the previous scroll position, so that the
selection was not visible.
Previously, when showing subcommits of a branch or tag, scrolling down, and then
going out and entering subcommits again, it would select the first commit but
keep the previous scroll position, so that the selection was not visible. Always
scroll to the top to fix this.
When selecting a directory containing many changed files, or when
range-selecting many changed files, and then discarding them, this could
be so slow that lazygit appeared to hang; especially since there was no
UI feedback (e.g. a spinning status message).
This PR improves the performance greatly by batching the individual git
calls into a single one if possible. It still doesn't add UI feedback
though, hoping that the operation is now fast enough that it isn't
needed.
While we're at it, we fix a bug that would cause "Discard unstaged
changes" to discard more than just the visible files when filtering by
path.
Fixes#4581.
This is probably the less severe case, but it could still be an issue for people
who have many modified top-level files they want to discard, and have
showRootItemInFileTree set to false; they could select all those files by
pressing 'v' and '>'.
Previously it would iterate over all changed files and call git checkout or git
reset for each one, which can take forever if there are hundreds or thousands of
files. Now it batches these into a single command if possible (taking care of
still passing the individual path names to the git call rather than just the
directory, which is necessary for making it work correctly when filtering --
this was actually broken for the "Discard unstaged changes" command, which is
fixed here).
When discarding a directory, we only want to discard those files that are
visible in the current filter view. The tests show that this already works
correctly for discarding all changes, but it doesn't for discarding only
unstaged changes: in this case, untracked files are handled correctly, but
changes to tracked files are discarded without respecting the filter.
We have integration tests for this functionality, but those only test the
behavior, not the performance. In these unit tests you can see that we make
individual calls to git checkout and git reset for each file, which is very slow
when there are lots of files.
Previously it would only check that *if* removeFile was called, the passed
argument was the expected one; but it didn't check whether it was called at all.
Improve this by recording the file names that are removed, and checking them at
the end of each scenario.
This is going to be even more important for the tests that we are about to add
in the next commit, because for those there can be several calls to removeFile
in a single scenario.
When switching to a different repo, and then back to the original one,
searching would no longer work. The reason is that our contexts set
callbacks on their views; when switching to a different repo we
instantiate a new set of contexts, so they will overwrite the views'
callbacks with their new ones, but when switching back to the original
repo, we reuse the old contexts because they are still in memory, but
they won't set their callbacks again since they only do this on
construction.
To fix this, replace the view-local callbacks with a global one on the
gui that takes the view as an argument, so that the callback can look up
the associated context dynamically.
When switching to a different repo, and then back to the original one, searching
would no longer work. The reason is that our contexts set callbacks on their
views; when switching to a different repo we instantiate a new set of contexts,
so they will overwrite the views' callbacks with their new ones, but when
switching back to the original repo, we reuse the old contexts because they are
still in memory, but they won't set their callbacks again since they only do
this on construction.
To fix this, replace the view-local callbacks with a global one on the gui that
takes the view as an argument, so that the callback can look up the associated
context dynamically.
Remove our dependency on go-git, which was including a ton of
third-party code for very little benefit.
In addition, this fixes the problem that lazygit wouldn't show any
branches or remotes for certain types of malformatted .git/config files,
e.g. when there's a config section like `[branch ""]`, `[remote ""]`, or
`[-remote "xyz"]`; see #3901 and #5112.
### PR Description
This PR adds support for clicking on arrows in the file changes list
view, so that a mouse can be used to expand/collapse directories. This
enhancement was raised here as issue #5088.
Can be used for doing additional click handling in list views.
Like the GetOnDoubleClick hook we should try to find a better design for this
than putting it in HasKeybindings and BaseContext, since it is only used by list
contexts.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
We have some documentation for the corresponding setters in IBaseContext, but
that's part of the controller infrastructure and not client facing. For somebody
implementing a new view, this is where they will probably look for what methods
they can override.
When this was originally introduced, it handled single clicks on a list entry
(treating them similar to a double-click by checking whether the click was on
the selected entry). Arguably it should have been called OnDoubleClick back then
already; but when we later changed it to do actual double-click detection (see
37197b8e9a), we should have renamed the methods.
If the showDivergenceFromBaseBranch config is not none, the expanded
branches panel would no longer show the remote branch and subject; the
reason was that we padded the name all the way to the right edge of the
view so that the divergence information is right-aligned.
To fix this, we simply don't right-align the divergence in half or full
screen mode. This is a bit unfortunate, but it's hard to do any better,
because we don't know the width of our column in advance. One thing I
tried is to make the divergence a separate column in that case (with an
explicit right-alignment set on it via getColumnAlignments; however,
this makes it harder to properly truncate the name when the window is
too narrow.
If the showDivergenceFromBaseBranch config is not none, the expanded branches
panel would no longer show the remote branch and subject; the reason was that we
padded the name all the way to the right edge of the view so that the divergence
information is right-aligned.
To fix this, we simply don't right-align the divergence in half or full screen
mode. This is a bit unfortunate, but it's hard to do any better, because we
don't know the width of our column in advance. One thing I tried is to make the
divergence a separate column in that case (with an explicit right-alignment set
on it via getColumnAlignments; however, this makes it harder to properly
truncate the name when the window is too narrow.
Given a block of consecutive changed lines, staging only some of those
changes didn't always work. Consider the following scenario:
```diff
@@ -1,5 +1,5 @@
a
-b
-c
-d
+b'
+c'
+d'
e
```
Trying to stage only the change to "d" worked already as expected, but
staging either "b" or "c" didn't; the order of the deleted and added
lines in staged changes were wrong. We don't solve the "c" case in this
PR, as it's probably uncommon enough so that it doesn't matter too much,
and it seems to be quite a bit harder than the other two (and git gui
doesn't support it either, for the record). But we fix the "b" case
here, which is probably the most common one.
Fixes#5103.
This fixes the problem; a consequence of this change is that given the following
scenario:
@@ -1,3 +1,3 @@
1
-2
+2b
3
staging only the line `+2b` will put it *before* the unchanged `2` line, rather
than after it as you might expect (the changed unit tests demonstrate this).
Since this should be a pretty uncommon scenario, I guess it is an ok compromise.
As you can see in the changed tests, while the behavior of what gets staged is
fixed now, it doesn't always correctly select the next line to stage. We'll
address this in the next commit.
This is a pretty special case (see comment in the test for details). It is
working correctly, but I almost broke it during development, so it's good to
cover it with a test.
Given a block of consecutive changed lines, trying to stage only some of them
doesn't work correctly in all cases:
- if the staged lines are the last lines in the block of changes, it already
works
- when staging some changes in the middle of the block, it doesn't work as
desired, but we also don't try to fix this case in this branch, because it's
harder to do, and not as common as the other two
- staging the first lines of the block doesn't work as desired, and we will fix
that in this branch.
### PR Description
When a branch is checked out by another worktree, show the worktree name
in the label, e.g. "(worktree cosmos2)" instead of just "(worktree)", so
you can immediately see which worktree holds it.
When a branch is checked out by another worktree, show the worktree
name in the label, e.g. "(worktree cosmos2)" instead of just
"(worktree)", so you can immediately see which worktree holds it.
When looking at a diff in diffing mode in the branches or tags panels
(e.g. after pressing `W` on a branch and then selecting a different
branch to diff it against the first one) it wasn't possible to change
the diff context size using `{` and `}`, or the rename threshold using
`(` and `)`.
Fixes#5254.
Actually, we simply enable them in any panel, even those that can never show a
diff. Since the commands show a toast, that's enough feedback to understand what
happened; the change will take effect the next time you switch to a panel that
does show diffs.
Same for ( and ) to change the rename threshold.
We did already have code to prevent clicks in inactive views behind a
popup, but it wasn't good enough. This PR fixes two problems:
- if the previously focused view (behind the panel) was a list view, it
would look like the click would select a different row, because gocui
would still set the view's cursor position, which is used to draw the
highlighted row
- it was still possible to click on tab headers, and this would dismiss
the panel
Fixes#5256.
This fixes two problems:
- if the previously focused view (behind the panel) was a list view, it would
look like the click would select a different row, because gocui would still
set the view's cursor position, which is used to draw the highlighted row
- it was still possible to click on tab headers, and this would dismiss the
panel
The symptom of the bug was that confirmation panels with wrapped text
were one character too wide, which could sometimes result in them being
one line too heigh. One concrete example is the "Discard file changes"
confirmation that appears when pressing `d` in the commit files panel.
I got confused when I investigated the bug that was fixed in the previous
commit, so hopefully these will be helpful for the next person reading this
code.
The symptom of the bug was that confirmation panels with wrapped text were one
character too wide, which could sometimes result in them being one line too
heigh. One concrete example is the "Discard file changes" confirmation that
appears when pressing `d` in the commit files panel.
I got very confused when investigating this bug, and the reason is that
getPopupPanelDimensionsAux took two parameters panelWidth and panelHeight, but
the second was actually contentHeight. Rename it to contentHeight, and change
the first one to also be the content width rather than the panel width. This is
easier for clients, and less confusing.
This commit implements the ability to cycle backward through different
all branches log visualization modes, complementing the existing forward
cycling functionality. Users can now press 'A' (Shift+a) to cycle in
reverse through the available log graph views, improving navigation
efficiency when they overshoot their desired view.
This commit implements the ability to cycle backward through different
all branches log visualization modes, complementing the existing forward
cycling functionality. Users can now press 'A' (Shift+a) to cycle in
reverse through the available log graph views, improving navigation
efficiency when they overshoot their desired view.
Changes:
- Added RotateAllBranchesLogIdxBackward() method to BranchCommands for
backward rotation through log command candidates
- Introduced AllBranchesLogGraphReverse keybinding configuration with
default key 'A' (uppercase)
- Implemented switchToOrRotateAllBranchesLogsBackward() handler in
StatusController that mirrors forward cycling logic
- Added English translation for "Show/cycle all branch logs (reverse)"
The implementation uses modulo arithmetic with proper handling of
negative indices to ensure seamless backward cycling through the
available log visualization options.
Fixes#5302
## Problem
When `.git/info` directory does not exist (can happen with bare clones,
manual deletion, or certain Git configurations), selecting "Add to
.git/info/exclude" fails with:
```
open <repo-path>/.git/info/exclude: no such file or directory
```
The `Exclude` function used `os.OpenFile` with `os.O_CREATE` which
creates the file but not its parent directory.
## Fix
Added `os.MkdirAll` to create the `.git/info` directory (with 0755
permissions) before attempting to open the exclude file. `MkdirAll` is a
no-op if the directory already exists, so existing behavior is
unchanged.
## Test
Added integration test `file/exclude_without_info_dir` that:
1. Removes `.git/info` directory during repo setup
2. Attempts to exclude a file via the menu
3. Verifies `.git/info/exclude` is created with the correct content
Test fails without the fix, passes with it.
Tested locally on macOS ARM (Apple Silicon). Unit tests and integration
test pass.
When .git/info directory does not exist (can happen with bare clones
or manual deletion), the Exclude function failed with 'no such file
or directory'. Added os.MkdirAll to create the directory before
opening the exclude file.
Added integration test exclude_without_info_dir that removes .git/info
before attempting to exclude a file.
### PR Description
The worktrees tab now displays the checked-out branch (or detached HEAD
state) for each worktree, making it much easier to see which worktree
holds which branch.
This is useful when you need to "unlock" a branch that's occupied by
another worktree: you can now clearly see which worktrees are on a
branch vs detached, without having to select each one individually.
Also rename the "(main)" label to "(main worktree)" to avoid confusion
with the common "main" branch name, and move it after the branch column.
The worktrees tab now displays the checked-out branch (or detached HEAD
state) for each worktree, making it much easier to see which worktree
holds which branch.
This is useful when you need to "unlock" a branch that's occupied by
another worktree: you can now clearly see which worktrees are on a
branch vs detached, without having to select each one individually.
Also rename the "(main)" label to "(main worktree)" to avoid confusion
with the common "main" branch name, and move it after the branch column.
### PR Description
Way back when I implemented filter functionality I could not muster the
motivation to apply it to the file views (files and commit files), but
it really should be used on them.
The text filter matches against the full file path (not just the
filename), which is more useful for navigating large directory trees.
When a text filter is active, all operations respect it consistently:
- **Diffs**: selecting a filtered directory shows only the diff of
visible files, not all files in the directory
- **Staging/unstaging**: pressing space on a filtered directory only
stages/unstages visible files
- **Toggle all (a)**: only toggles staging for visible files
- **Custom patch**: toggling a filtered directory only adds visible
files to the patch
Full disclosure, opus 4.6 wrote this entire PR but reviewing its changes
they seem reasonable, and I have done some local testing and everything
works as expected.
Change working tree files and commit files panels to use filtering
(reducing the list) instead of search (highlighting matches). This
matches the behavior of other filterable views.
The text filter matches against the full file path, not just the
filename, which is more useful for navigating large directory trees.
When toggling a directory for a custom patch while a text filter is
active, only the visible filtered files in the directory are affected,
consistent with how staging a directory in the files panel works.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Without this check, the selection was being reset to 0 whenever
ReApplyFilter was called for the current filter context, even when
the user wasn't actively typing in the search prompt (e.g. when the
model updates in the background). This was causing unexpected cursor
jumps.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When opening a filter prompt, reset PrevSearchIndex to -1 to avoid
stale search state from a previous search/filter session.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
This avoids a naming collision with GetFilter from the
IFilterableContext interface, which will be implemented by
FileTreeViewModel in the next commit.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
I always press 'd' in the patch building view, expecting that I can do
exactly what I can do in the staging view, to find out I need to go
space -> ctrl+p -> d and I think it's time to honour the muscle memory
and support this convenience keybinding. I recall we may have had a
debate about this in the past and if so I'm renewing my stance.
I always press 'd' in the patch building view, expecting that I can do
exactly what I can do in the staging view, to find out I need to go
space -> ctrl+p -> d and I think it's time to honour the muscle memory
and support this convenience keybinding.
We don't add the commands to the menu when we're rebasing, so it's pointless to
check this in the handlers.
I guess alternatively we could add all commands always, and strike out the ones
that are not applicable using DisabledReasons. But we don't usually do this in
menus (except the global keybindings menu).
Only mention resetting the patch when there actually is one. This way users have
to read less text in the normal case, and the added note hopefully stands out
more if there is one. Also, separate the note from the previous text by a blank
line.
"Remove" can be confusing when a deleted file is selected; in this cases it
actually "un-removes" it. "Discard" hopefully makes it clearer that we are
talking about the change to a file, and not the file itself.
If the bottom line is hidden (by setting `gui.showBottomLine` to false
in the config), don't show the "Fetching..." status because it changes
the layout, which should happen only in response to user actions.
However, keep the status for the first fetch after startup, and right
after switching repos, because in these cases it is useful to see when
the fetch is done.
Closes#5242.
If the bottom line is hidden (by setting gui.showBottomLine to false in the
config), don't show the "Fetching..." status because it changes the layout,
which should happen only in response to user actions.
However, keep the status for the first fetch after startup, and right after
switching repos, because in these cases it is useful to see when the fetch is
done.
### PR Description
Tweak regexp such that a trailing ":" is not included in the file path
extracted from a lazygit-edit URL.
Previously, when matching a URL containing the ":" separator but no line
number, such as `lazygit-edit:///path/to/file.ext:`, the trailing
separator would be included in the matched file path, so lazygit would
open the non-existent file `/path/to/file.ext:`. Notably, such urls are
created when using delta with the hyperlink feature, as suggested in
https://github.com/jesseduffield/lazygit/blob/master/docs/Custom_Pagers.md#delta,
and clicking a file path rather than a line number.
Fixes#5308
Tweak regexp such that a trailing ":" is not included in the file path
extracted from a lazygit-edit URL.
Previously, when matching a URL containing the ":" separator but no line
number, such as `lazygit-edit:///path/to/file.ext:`, the trailing
separator would be included in the matched file path, so lazygit would
open the non-existent file `/path/to/file.ext:`. Notably, such urls are
created when using delta with the hyperlink feature, as suggested in
https://github.com/jesseduffield/lazygit/blob/master/docs/Custom_Pagers.md#delta,
and clicking a file path rather than a line number.
There's too much manual work involved in releasing now (updating
translations, copying docs-master) to make automatic releases
infeasible. I'm not worried that I forget to release on the first
Saturday of every month.
Keeping the code commented out in case we want to re-enable it at some
point.
There's too much manual work involved in releasing now (updating translations,
copying docs-master) to make automatic releases infeasible. I'm not worried that
I forget to release on the first Saturday of every month.
Keeping the code commented out in case we want to re-enable it at some point.
This is a regression introduced with #5135. I didn't notice it because I
am using `gui.scrollOffBehavior: jump`, in which case the problem
wouldn't appear; it only happened with `scrollOffBehavior: margin`
(which is the default). In that case, if you used the arrow keys (or
j/k) to move the selection so that the view would start to scroll, empty
space would appear.
Fixes#5235.
This is a regression introduced with #5135. I didn't notice it because I am
using `gui.scrollOffBehavior: jump`, in which case the problem wouldn't appear;
it only happened with `scrollOffBehavior: margin` (which is the default). In
that case, if you used the arrow keys (or j/k) to move the selection so that the
view would start to scroll, empty space would appear.
### PR Description
Paths added to ignore/exclude files need to be prefixed with a forward
slash to point to a specific file in the directory tree.
Without that prefix a file at root called `file` (added to `.gitignore`
as `file`) would match with `./file` and `./src/file`.
Example flow:
1. User creates a directory called `tests` in root
2. User sees that it's tracked
3. User ignores the directory in Lazygit
4. Changes in `src/tests` are now missing - because `tests` without `/`
matches also directories lower in the tree
Paths added to ignore/exclude files need to be prefixed with a forward
slash to point to a specific file in the directory tree.
Without that prefix a file at root called `file` (added to `.gitignore`
as `file`) would match with `./file` and `./src/file`.
This brings in https://github.com/jesseduffield/gocui/pull/98 with the following
fix:
Fix rendering of CRLF sequence ('\r\n')
The FirstGraphemeCluster call returns this as a single character; we want to
treat it the same way as a single \n.
This would be a problem if e.g. a progress bar used \r repeatedly to paint over
the same line, and then printed a \n to move on to the next line; the last pair
of \r and \n was swallowed.
Another scenario where this was a problem was if you stream output of a command
to the log, and the command used \r\n as line feeds. This happens for example
for a background fetch that fails with an error; in that case we print the
combined output (stdout plus stderr) to the log after the command finished, and
for some reason it uses \r\n in that case (I can't actually explain why; when I
do `git fetch --all | xxd` I see only bare \n characters). All output would
appear on one line then.
Also, filter out escape sequences for character set designation; there's nothing
useful we can do with them. In practice, the only one that you are likely to see
is `ESC ( B`, which is sent as part of tput sgr0, which is sometimes used in
scripts to reset all graphics attributes to defaults.
### PR Description
I had a spare couple hours so figured I'd whip up a PR for a feature
I've wanted for a while.
I've optimised for muscle memory backwards compatibility here:
- Outside interactive rebase: press 'f' then instead of a confirmation
panel, a menu appears where you can choose to keep the selected commit's
message
- Inside interactive rebase: press 'f' then press 'c' to see the menu
for keeping the message, where if you press 'c' again it will retain the
current message. so 'fcc' is the chord to press.
We're also now showing the -C flag (which is what enables the behaviour)
against the todo.
I've picked the 'c' keybinding because 'C' was taken and it corresponds
to the flag. Previously that showed a warning about a change in
keybinding for cherry picking but it's been ages since we've made that
change so I'm happy to retire it.
I've optimised for muscle memory backwards compatibility here:
- Outside interactive rebase: press 'f' then instead of a confirmation
panel, a menu appears where you can choose to keep the selected commit's
message
- Inside interactive rebase: press 'f' then press 'c' to see the menu
for keeping the message, where if you press 'c' again it will retain the
current message. so 'fcc' is the chord to press.
We're also now showing the -C flag (which is what enables the behaviour)
against the todo.
I've picked the 'c' keybinding because 'C' was taken and it corresponds
to the flag. Previously that showed a warning about a change in
keybinding for cherry picking but it's been ages since we've made that
change so I'm happy to retire it.
Not used yet, we pass an empty string everywhere, to match the previous
behavior. Just extracting this into a separate commit to make the next one
smaller.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
It's been ages since we changed the key, users should hopefully be used to it by
now, and we want to reuse the key for something else later in the branch.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
On very large screens they would get ridiculously wide.
The limits we chose here are a little arbitrary:
- 80 for confirmations and prompts
- 90 for menus
- auto-wrap width plus 25 for the commit message editor (or 100 if
auto-wrap is off)
On very large screens they would get ridiculously wide.
The limits we chose here are a little arbitrary:
- 80 for confirmations and prompts
- 90 for menus
- auto-wrap width plus 25 for the commit message editor (or 100 if auto-wrap is
off)
To reproduce: open the keybindings menu ('?'), press '>' to select the
last line, esc to close it, open it again. The view would appear still
scrolled down, so the selected first line was out of view. Even worse,
if you open a different, shorter menu (e.g. the "View upstream reset
options..." menu in the Files panel), you'd only see the Cancel item,
the other ones were scrolled out of view.
This is a regression introduced with efd4298b5e (#5134).
To reproduce: open the keybindings menu ('?'), press '>' to select the last
line, esc to close it, open it again. The view would appear still scrolled down,
so the selected first line was out of view. Even worse, if you open a different,
shorter menu (e.g. the "View upstream reset options..." menu in the Files
panel), you'd only see the Cancel item, the other ones were scrolled out of
view.
This is a regression introduced with efd4298b5e (#5134).
When marking commits as good or bad during a bisect, a "git rev-list"
call would appear in the Command log. This is confusing, it's an
internal detail that is not interesting for the user to see.
When marking commits as good or bad during a bisect, a "git rev-list" call would
appear in the Command log. This is confusing, it's an internal detail that is
not interesting for the user to see.
### PR Description
- Updated `actions/github-script` from `v7` to `v8` in
`.github/workflows/close-issues.yml`
- Updated `actions/setup-go` from `v5` to `v6` in
`.github/workflows/release.yml`
- Updated `golangci/golangci-lint-action` from `v8` to `v9` in
`.github/workflows/ci.yml`
- Updated `actions/checkout` from `v4` to `v6` in
`.github/workflows/codespell.yml`
- Updated `actions/checkout` from `v4` to `v6` in
`.github/workflows/release.yml`
- Updated `peter-evans/create-pull-request` from `v7` to `v8` in
`.github/workflows/sponsors.yml`
- Updated `actions/download-artifact` from `v4` to `v7` in
`.github/workflows/ci.yml`
- Updated `actions/checkout` from `v4` to `v6` in
`.github/workflows/ci.yml`
- Updated `actions/checkout` from `v4` to `v6` in
`.github/workflows/sponsors.yml`
- Updated `actions/setup-go` from `v5` to `v6` in
`.github/workflows/ci.yml`
The changes ensure that the GitHub Action workflows are using the latest
versions of the actions, which include improved functionality and
compatibility. These updates will be tested in the CI pipeline of the
pull request.
If the ctrl-f function (Find base commit for fixup) finds a base commit
plus a bunch of fixup! commits for that base commit, it ignores those
fixups and selects the base commit. For the purpose of creating another
fixup commit on top this is always what you want, so I'm doing this
without adding a confirmation. If the user presses shift-A after that to
amend their changes though, they are guaranteed to get conflicts, so for
that case a warning might be useful; however, I find it unlikely that
users will want to amend changes to a commit that they already created
fixups for, so I'm just hoping that this won't happen in practice.
This implementation is a bit stricter than #5201, in that it only
ignores fixups if the first found commit is not a fixup itself; because
if it is, it's not clear whether the user wants to create another fixup
for both on top, or amend the changes into each one, in which case they
need to be staged individually.
When opening a PR, a "git ls-remote" call would appear in the Command
log. This is confusing, it's an internal detail that is not interesting
for the user to see.
When opening a PR, a "git ls-remote" call would appear in the Command log. This
is confusing, it's an internal detail that is not interesting for the user to
see.
This provides two fixes:
- proper handling of keypad keys on certain terminals (e.g. iTerm2)
- fix problems pasting certain emojis or east asian text on Windows
Terminal
Fixes#5171Fixes#5173
This provides two fixes:
- proper handling of keypad keys on certain terminals (e.g. iTerm2)
- fix problems pasting certain emojis or east asian text on Windows Terminal
When searching (not filtering) in a list view using `/`, moving the
selection now updates the "x of y" indicator of the search results to
the last one before the selection. Pressing `n` again searches from
there rather than from the previously shown result.
Also see corresponding gocui PR at
https://github.com/jesseduffield/gocui/pull/95.
Checking out a file discards all local modifications to that file;
checking out a directory discards modifications to all files in that
directory. This can result in lost work if the user isn't aware of this.
Instead of showing a confirmation (to which the user might press enter
too hastily, still losing their work), or showing a menu with
auto-stash/discard options, we simply show an error. The assumption is
that this is an unusual situation that users won't run into often, and
if they do, it's easy enough to manually address it by stashing or
discarding the changes as appropriate.
Fixes#5142.
This bumps our gocui dependency, which recently learned to render
multi-rune grapheme clusters properly. This fixes rendering of a lot of
emojis such as ⚡️ or 🏴.
Fixes#4854Fixes#4347Fixes#3811Fixes#3711Fixes#3606Fixes#3514Fixes#2702Fixes#2409
Draw only the visible lines of the reflogs panel, like we do for
commits.
Since the reflog can get very long, this saves some memory but
especially some UI thread lag. In one of my repos I had over 11'000
reflog entries (I guess I should prune them more regularly...), and
rendering them took ~600ms; since this happens on the UI thread, there
was an annoying stall for half a second after every background fetch,
for example (even if the reflog panel is not visible).
Since the reflog can get very long, this saves some memory but especially some
UI thread lag. In one of my repos I had over 11'000 reflog entries (I guess I
should prune them more regularly...), and rendering them took ~600ms; since this
happens on the UI thread, there was an annoying stall for half a second after
every background fetch, for example.
This fixes a bug in ListContextTrait.FocusLine whereby the view would go blank
when scrolling by page (using ',' or '.') in views that have
renderOnlyVisibleLines set to true but refreshViewportOnChange set to false.
Currently we don't have any such views; the only ones who use
renderOnlyVisibleLines are commits and subcommits, and they also use
refreshViewportOnChange. However, we are going to add one in the next commit,
and eventually it might be a good idea to convert all our list views to that by
default, and get rid of the renderOnlyVisibleLines flag.
Move SetContentLineCount into OverwriteLinesAndClearEverythingElse. Calling it
separately beforehand is not concurrency safe; we need both to happen
when the view's writeMutex is locked.
It is possible to scroll the selection out of view using the mouse
wheel; after doing this, it would sometimes scroll into view by itself
again, for example when a background fetch occurred. In the files panel
this would even happen every 10s with every regular files refresh.
Fix this by adding a scrollIntoView parameter to HandleFocus, which is
false by default, and is only set to true from controllers that change
the selection.
Fixes#5097.
We have this logic to avoid constantly rerendering the main view when hitting
up-arrow when you are already at the top of the list. That's good, but we do
want to scroll the selection into view if it is outside and you hit up or down,
no matter if it changed.
It is possible to scroll the selection out of view using the mouse wheel; after
doing this, it would sometimes scroll into view by itself again, for example
when a background fetch occurred. In the files panel this would even happen
every 10s with every regular files refresh.
Fix this by adding a scrollIntoView parameter to HandleFocus, which is false by
default, and is only set to true from controllers that change the selection.
We want to do this whenever we switch branches; it wasn't done consistently
though. There are many different ways to switch branches, and only some of these
would reset the selection of all three panels (branches, commits, and reflog).
We move the selection down by the number of commits that were reverted (to keep
the same commits selected). However, this only happens after refreshing, which
has rendered the main view with the wrong commit, so we need to render it again
after moving the selection.
There are many other callers of MoveSelection in LocalCommitsController, but all
of them happen before the refresh. Revert is special because it needs to move
the selection after refreshing, e.g. when reverting the only commit of a branch.
Now that we can use 'k' as a menu item binding (this was fixed in
#5131), use it for the "keep" entry in the merge menu. I don't think
this will be a problem for people's muscle memory, given that this menu
is not encountered every day; and it's simply the better keybinding.
This reverts commit b32b55201e.
Now that we can use 'k' as a menu item binding (this was fixed in #5131), use it
for the "keep" entry in the merge menu. I don't think this will be a problem for
people's muscle memory, given that this menu is not encountered every day; and
it's simply the better keybinding.
This reverts commit b32b55201e.
Previously they would be shown as keybindings in the menu, but they
didn't work because their builtin functionality (select next/prev line,
scroll view left/right) would take precedence.
This will allow us to revert #4934; doing that in a separate PR, see
#5132.
This is not really super important because we are very unlikely to assign a key
such as esc or up/down to a menu item. However, users might do this in a custom
commands menu, and in that case it is important that the builtin keys still
work; or they might remap those builtin commands to other keys, in which case
they might conflict with single-letter keys in normal menus.
The test shows two problems: a <down> keybinding is not removed from a menu item
(the 'y' binding is removed though, which is correct), and keybindings such as
'j' and 'H' don't work. We will fix both of these separately in the following
commits.
Thank you for an awesome tool. I wanted to add support for codeberg.
Tested locally that opening pull-request works
### PR Description
Codeberg is a Gitea-based git hosting service that uses the same URL
patterns for pull requests and commits but differs on its hostname
Codeberg is a Gitea-based git hosting service that uses the same URL
patterns for pull requests and commits. This adds native support so
users don't need to manually configure it.
The confirmation used to make sense back when the Open MergeTool command
was its own top-level command; however, that command was changed in
#4889 to open a menu instead, and Open MergeTool is now just a submenu
entry in that menu, so it no longer needs a confirmation.
Fixes#5093.
The confirmation used to make sense back when the Open MergeTool command was its
own top-level command; however, that command was changed in 703f053a7e to open a
menu instead, and Open MergeTool is now just a submenu entry in that menu, so it
no longer needs a confirmation.
### PR Description
Use case: some repositories are cloned with a full SSH alias (without a
user). E.g. in `.ssh/config` you have
```
Host gitlab
HostName gitlab.com
User git
IdentityFile ...
```
and then you clone with `git clone gitlab:foo/bar`
According to the docs, you can add a service to `config.yaml` and it
should work:
```yaml
services:
gitlab: 'gitlab:gitlab.com'
```
But currently it doesn't because lazygit expects all remote URLs to have
a user. This can be fixed by the user by changing the URL to e.g.
`git@gitlab:foo/bar`, but it breaks the user flow and is quite
unexpected.
This PR changes `defaultUrlRegexStrings` and makes the `user@` part of
the remote URL optional. Fixes the issue for Github and Gitlab which use
the default regexes.
Users have filed issues with crash reports that seem to indicate that
the FileTreeViewModel gets swapped out (by a refresh) while a call to
itemsSelected is in progress, iterating over the previous items. Guard
against this by locking the mutex that we already have for this for the
duration of the call.
I don't have a good way of testing whether the fix helps, because the
crashes only occurred very infrequently. Let's just see if the crash
reports stop coming in after we ship this.
Note also that this is only the minimal fix for the crashes that were
reported. Theoretically, the same problem could happen for a key handler
itself, but we never saw reports about that, so we don't bother doing
anything about that yet.
Note also that long-term I envision a different solution to this class
of problems (discussed in
https://github.com/jesseduffield/lazygit/issues/2974), that's why I want
to avoid locking mutexes more than necessary now.
Fixes#3646Fixes#4154Fixes#4301Fixes#5070
Users have filed issues with crash reports that seem to indicate that the
FileTreeViewModel gets swapped out (by a refresh) while a call to itemsSelected
is in progress, iterating over the previous items. Guard against this by locking
the mutex that we already have for this for the duration of the call.
I don't have a good way of testing whether the fix helps, because the crashes
only occurred very infrequently. Let's just see if the crash reports stop coming
in after we ship this.
Note also that this is only the minimal fix for the crashes that were reported.
Theoretically, the same problem could happen for a key handler itself, but we
never saw reports about that, so we don't bother doing anything about that yet.
Note also that long-term I envision a different solution to this class of
problems (discussed in https://github.com/jesseduffield/lazygit/issues/2974),
that's why I want to avoid locking mutexes more than necessary now.
If the ctrl-f command ("Find base commit for fixup") finds multiple
candidates, it lists them all in an error message. Previously they were
listed in random order in the error message, which can be confusing;
it's nicer to see them in the same order in which they appear in the
commit log.
Fixes#5071.
We want to test the order in which the commits are listed in the error message.
For one of the tests the order is already as we want it, but for the other it's
not (we want them to show up in log order). We'll fix this in the next commit.
It is a bit generic, it seems that users sometimes set it for other reasons, and
then they are confused why they don't see anything. Use a more specific name
instead.
The file suggestions list that appears when you choose "Enter path to
filter by" from the Filtering menu was previously implemented by walking
the file system to collect all files, and then filter out the ones that
are git-ignored. This approach had several problems:
- for certain .gitignore configurations there was a bug in the code that
filters out ignored files, causing the list to be empty. See
https://github.com/jesseduffield/lazygit/issues/2642#issuecomment-3554117172
for details.
- the list included files from submodules. While at first glance this
might sound useful, it doesn't work: choosing a file from the list shows
an empty log. Lazygit would have to switch to the submodule first to
show the log, which would be unexpected in the context of the Filtering
dialog, so it's better to not show these files, and require the user to
enter a submodule explicitly before they can filter on a file in it.
- it was rather slow.
This PR improves all these by using a call to `git ls-files` to list the
repositories files.
Here are some rough hand-timed measurements (from opening the Filtering
dialog until the file list shows) for various repos:
| | before | after |
|:--------------------------- | ------:| -------------- |
| lazygit (3'200 files) | ~1s | not measurable |
| my work repo (90'000 files) | 7s | <1s |
| llvm (150'000 files) | 5s | ~1s |
Fixes#2642
We move the code to push the branches context into CheckoutRef, this way
it works consistently no matter where we call it from. Previously,
checking out remote branches or tags would switch to the branches view,
but checking out a commit did not.
Note that it now also takes effect for undoing or redoing a checkout,
which may be a bit questionable; but I still think it makes sense for
this, too.
We move the code to push the branches context into CheckoutRef, this way it
works consistently no matter where we call it from. Previously, checking out
remote branches or tags would switch to the branches view, but checking out a
commit did not.
Note that it now also takes effect for undoing or redoing a checkout, which may
be a bit questionable; but I still think it makes sense for this, too.
If background fetching is on (which it is by default), we usually run
the first background fetch right after opening lazygit, which is nice
because it immediately fetches all the stuff that's new. However, when
switching to a different repo from within lazygit (either with the
recent repos menu or by going into or out of a submodule) we didn't do
that, and you'd have to wait for the next regular background fetch to
come along. I'm finding myself pressing `f` in the Files panel to
manually fetch after entering a submodule, and I shouldn't have to do
that.
This PR makes it so that when you switch repos, we trigger a background
fetch immediately (unless the last one for this repo was less than the
auto-fetch interval ago, in which case it's unnecessary).
The output from background fetching is noisy and pollutes the command
log. Don't show it by default, unless there were errors, in which case
it is important to see e.g. which fork was deleted.
However, show it when there was an error. This is important for the case that a
fork that you have as a remote was deleted, in which case the command log is the
only way to get notified about that.
Most of our prompts don't (shouldn't) allow empty input, but most
callers didn't check, and would run into cryptic errors when the user
pressed enter at an empty prompt (e.g. when creating a new branch). Now
we simply don't allow hitting enter in this case, and show an error
toast instead.
This behavior is opt-out, because there are a few cases where empty
input is supported (e.g. creating a stash).
This doesn't really solve a pressing problem, because I guess it's unlikely that
users add spaces at the beginning or end of what they type into a prompt; but it
could happen, and in this case we almost always want to strip it. Just adding
this here for completeness while I was working on this code.
The only exception is the input prompt of custom commands, because who knows
what users want to use that input for in their custom command.
Most of our prompts don't (shouldn't) allow empty input, but most callers didn't
check, and would run into cryptic errors when the user pressed enter at an empty
prompt (e.g. when creating a new branch). Now we simply don't allow hitting
enter in this case, and show an error toast instead.
This behavior is opt-out, because there are a few cases where empty input is
supported (e.g. creating a stash).
Previously it was used both for the Confirm handler and the Cancel handler, as
well as for the Confirm handler of confirmation popups (not prompts). There was
no other way to do it given how wrappedConfirmationFunction was shared between
all these; but now there is. The logic is really only needed for the Confirm
handler of prompts.
This doesn't fix anything, it just makes things clearer.
And call this new helper function from both wrappedConfirmationFunction and
wrappedPromptConfirmationFunction; this gives us more flexibility to do
different things in each of those.
Introduce the 'SelectedSubmodule' struct and allow using it as a
placeholder value.
Add a corresponding test.
Update the documentation to include it among the listed placeholder
values.
Some of our documentation is auto-generated from the source code (the
defaults section in Config.md, and the keybinding cheat sheets), and so
is the JSON schema for the config file. We have a check running on CI
that verifies that when the source code changes (e.g. a new config
option is added), those files are properly regenerated, to make sure
they are always up to date with the latest version of the source code.
This causes a problem when people look at the documentation for a newly
added config option and wonder why it doesn't work in the lazygit
version they are using. Lots of issues were filed where people report
this as a bug, and we have to patiently explain to them that the
documentation describes a feature that hasn't been released yet. A
similar problem occurs when we rename a config option (as has recently
happened with the 'paging' config, which was renamed to 'pagers' in
#4953), in which case the user's editor (if it supports JSON validation
against the jsonschema store) starts to complain about the old config,
even though it still works, and the new one doesn't yet.
To solve this, keep the documentation and the JSON schema unchanged for
the lifetime of a release; make those continuous changes in a separate
copy of those folders, and only copy the files back to the real location
right before we make a release. To facilitate this, we add a script to
conveniently create a PR for copying the files back, and add a check to
the release workflow to abort with an error if this was forgotten.
Note that we only use this approach in order to solve the problem with
the auto-generated files; this has a consequence for making changes to
the other, non-auto-generated parts of the docs. For example, when
fixing a spelling error, rewording a paragraph to explain it better, or
adding an entirely new file, those changes will now have to be made in
docs-master, which means:
1. if we forget this and make the change in `docs` accidentally, it will
be reverted with the next release.
2. if we do remember to make the change in docs-master, it will take
until the next release for it to be visible to users.
We can mitigate 2. by making the identical change in both places, but I
think we should first wait and see how often it happens, and whether it
is actually a problem.
This needs to be run immediately before creating a release.
We could go further here and use gh to create the PR, but since I'm usually
logged in with my work account to gh, this won't help me. The git push command
prints the URL to create the PR, so it's a simple matter of command-clicking it,
which is good enough for me.
The plan is to keep the original docs and schema folders unchanged for the
duration of a release; we'll only continuously update the -master copies. Right
before a new release we will copy them over.
When pressing '.' (next page) or ',' (previous page), the selection now
stays at the bottom or top of the viewport respectively, instead of
being centered which caused items to scroll off. (If the selection is
not already on the last/first line of the view, '.'/',' moves it there
without scrolling.)
This implements a special case for page navigation as suggested by the
maintainer in issue #5017, keeping the cursor position consistent with
user expectations for page-based navigation.
Fixes#5017
When pressing '.' (next page) or ',' (previous page), the selection
now stays at the bottom or top of the viewport respectively, instead
of being centered which caused items to scroll off. If the selection is not
already on the last/first line of the view, '.'/',' moves it there without
scrolling.
This implements a special case for page navigation as suggested by
the maintainer in issue #5017, keeping the cursor position consistent
with user expectations for page-based navigation.
Fixes#5017
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
### PR Description
This allows for having extra slashes in git URLs. Especially in
submodules. Those may be used to avoid warnings with older bitbake
fetcher implementations in yocto. Which warns about relative urls when
not having a slash in git urls.
- git@bitbucket.org:project/repo.git -> generates a warning in bitbake,
which is annoying.
- git@bitbucket.org:/project/repo.git -> does not generate a warning in
bitbake.
But when trying to open a PR from lazygit with an url like
git@bitbucket.org:/project/repo.git leads to
https://bitbucket.org//project/repo being opened and one has to stare at
a blank page unless one removes the extra / manualy.
This PR updates the regex used for matching git url fragments in a way,
that the extra `/` is ignored.
This allows for having extra slashes in git urls, for example to avoid
warnings with older bitbake fetcher implementations in yocto. Which
warns about a missing / in git urls
The "Cycle pagers" command wasn't rendered correctly, because it's bound
to '|' by default, but this was taked as a table column delimiter. Fix
this by escaping the pipe character.
A similar thing could happen for the description or tooltip (and did in
fact, for a tooltip in the russion translation), so escape those too
just to be sure.
The "Cycle pagers" command wasn't rendered correctly, because it's bound to '|'
by default, but this was taked as a table column delimiter. Fix this by escaping
the pipe character.
A similar thing could happen for the description or tooltip (and did in fact,
for a tooltip in the russion translation), so escape those too just to be sure.
### PR Description
The existing diff parser incorrectly treated subsequent lines beginning
with `---` as filename headers while processing hunks. This caused
corruption when dashed lines appeared within diffs themselves.
Restrict filename detection to only occur between hunks.
This repository https://github.com/abobov/lazygit-fixup-issue
demonstrates the issue:
- clone repository
- run `git reset --soft HEAD~`
- try `<c-f>` Find base commit for fixup
- `fatal: no such path ...` error
The existing diff parser incorrectly treated subsequent lines beginning
with "---" as filename headers while processing hunks. This caused
corruption when dashed lines appeared within diffs themselves.
Restrict filename detection to only occur between hunks.
When replacing the naked return with a `return result`, the linter starts to
complain about "return copies lock value: sync/atomic.Int32 contains
sync/atomic.noCopy". I suspect this is also a problem when using a naked return,
and the linter just doesn't catch it in that case. Either way, it's better to
use a pointer to ensure that the atomic is not copied.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
When a new enough gofumpt version is used (v0.9.0 or later), it suports the
`ignore` directive that we just added, so the workaround is no longer needed.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
This will put whatever git's default merge variant is as the first menu
item, and add a second item which is the opposite (no-ff if the default
is ff, and vice versa). Which one is the default depends on whether a
fast-forward merge is possible, and whether users have set git's
`merge.ff` config or lazygit's `git.merging.args` config.
If users prefer to always have the same option first no matter whether
it's applicable, they can make ff always appear first by setting git's
`merge.ff` config to "true" or "only", or by setting lazygit's
`git.merging.args` config to "--ff" or "--ff-only"; if they want no-ff
to appear first, they can do that by setting git's `merge.ff` config to
"false", or by setting lazygit's `git.merging.args` config to "--no-ff".
Which of these they choose depends on whether they want the config to
also apply to other git clients including the cli, or only to lazygit.
Closes#4091.
This will put whatever git's default merge variant is as the first menu item,
and add a second item which is the opposite (no-ff if the default is ff, and
vice versa).
If users prefer to always have the same option first no matter whether it's
applicable, they can make ff always appear first by setting git's "merge.ff"
config to "true" or "only", or by setting lazygit's "git.merging.args" config to
"--ff" or "--ff-only"; if they want no-ff to appear first, they can do that by
setting git's "merge.ff" config to "false", or by setting lazygit's
"git.merging.args" config to "--no-ff". Which of these they choose depends on
whether they want the config to also apply to other git clients including the
cli, or only to lazygit.
- Squash and FastForwardOnly are mutually exclusive, and instead of asserting
this at runtime, model the API so that they can't be passed together.
- FastForwardOnly is unused, so remove it; however, we are going to need --ff
and --no-ff in the next commit, so add those instead.
- Instead of putting the enum into the MergeOpts struct, replace the struct by
the enum. We can reintroduce the struct when we add more arguments, but for
now it's an unnecessary indirection.
I found that PR status becomes green even if no label added when we use
`Update branch` on GitHub PR page.
So I added `synchronize` event to the hooks of `Check Required Labels`.
Stashing doesn't affect submodules, so if you have a working copy that
has out-of-date submodules but no other changes, and then you revert or
paste a commit (or invoke one of the many other lazygit commands that
auto-stash, e.g. undo), lazygit would previously try to stash changes
(which did nothing, but also didn't return an error), perform the
operation, and then pop the stash again. If no stashes existed before,
then this would only cause a confusing error popup ("error:
refs/stash@{0} is not a valid reference"), but if there were stashes,
this would try to pop the newest one of these, which is very undesirable
and confusing.
Stashing doesn't affect submodules, so if you have a working copy that has
out-of-date submodules but no other changes, and then you revert or paste a
commit (or invoke one of the many other lazygit commands that auto-stash, e.g.
undo), lazygit would previously try to stash changes (which did nothing, but
also didn't return an error), perform the operation, and then pop the stash
again. If no stashes existed before, then this would only cause a confusing
error popup ("error: refs/stash@{0} is not a valid reference"), but if there
were stashes, this would try to pop the newest one of these, which is very
undesirable and confusing.
This happened to a few users after updating macOS to version 15.7.1, and
apparently a reboot fixes it, so suggest this in the error message.
Closes#4924
Adds a config option that disables the confirmation for switching to a
worktree when trying to check out a branch that is checked out in that
other worktree.
Fixes#4938.
Lazygit would become unresponsive when cherry-picking a commit that
becomes empty at the destination. There are two ways this can happen:
one where a cherry-picked commit simply becomes empty "by itself",
because the change is already present on the destination branch (this
was only a problem with git versions older than 2.45), and another where
the cherry-pick stops with conflicts, and the user resolves them such
that no changes are left, and then continues the cherry-pick. This would
still fail even with git 2.45 or later. The fix is the same for both
cases though.
Fixes#4763.
I can't do my usual "add the tests first, with EXPECTED/ACTUAL sections that
document the bug" method here, because the tests would hang without the bug
being fixed.
We need two different tests here: one where a cherry-picked commit simply
becomes empty "by itself", because the change is already present on the
destination branch (this was only a problem with git versions older than 2.45),
and the other where the cherry-pick stops with conflicts, and the user resolves
them such that no changes are left, and then continues the cherry-pick. This
would still fail even with git 2.45 or later. The fix is the same for both cases
though.
The tests show that the selection behavior after skipping an empty cherry-picked
commit is not ideal, but since that's only a minor cosmetic problem we don't
bother fixing it here.
Whenever git returns the error "The previous cherry-pick is now empty", we would
previously continue the rebase; this works for rebase because it behaves the
same as "git rebase --skip" in this case. That's not true for cherry-pick
though; if you continue a cherry-pick where the current commit is empty, it will
return the same error again, causing lazygit to be stuck in an endless loop.
Fix this by skipping instead of continuing; this shouldn't make a difference for
rebase, but works for cherry-pick.
Theoretically we could have a similar problem for revert (if you are trying to
revert a commit that has already been undone through some other means); this
should then be fixed in the same way with this change. However, the change is
not relevant for revert because git returns a different error in this case.
When focusing the main view, going into full screen mode by pressing '+'
twice, and then opening the search prompt ('/') or a menu (e.g. '?' or
':'), the full screen display would switch to the focused side panel.
Fix this by always excluding popups from the window arrangement logic.
No popup should ever have any influence on how the views beneath it are
laid out.
Addresses [this detail
aspect](https://github.com/jesseduffield/lazygit/issues/1113#issuecomment-3206883422)
of #1113.
When focusing the main view, going into full screen mode by pressing '+' twice,
and then opening the search prompt ('/') or a menu (e.g. '?' or ':'), the full
screen display would switch to the focused side panel.
Fix this by always excluding popups from the window arrangement logic. No popup
should ever have any influence on how the views beneath it are laid out.
Allow configuring an array of pagers, and cycling through them with the
`|` key (mnemonic: we are piping the output through something). I find
this useful for switching between delta (which I prefer most of the
time) and difftastic (which occasionally produces better output for
certain kinds of changes). It could also be used to switch between delta
in inline mode and in side-by-side mode.
This is an object that is owned by Gui, is accessible through GuiCommon.State(),
and also passed down to GitCommand, where it is mostly needed. Right now it
simply wraps access to the Git.Paging config, which isn't very exciting, but
we'll extend it in the next commit to handle a slice of pagers (and maintain the
currently selected pager index), and doing this refactoring up front allows us
to make that change without having to touch clients.
This is likely to do bad things; for example, if the prompt is the shell
command prompt, then we would run into what looks like a deadlock bug in
tcell. In other cases, the characters in the following lines might be
treated as random keybindings after the prompt is confirmed; this is
very similar to #4234.
In this case, it seems the best we can do is to simply swallow the line
feeds. The entire pasted text will then appear as a single long line in
the prompt, and hopefully the user knows that they can use ctrl-u to
delete it again. If not, they will probably just hit esc to close the
prompt.
Fixes#4954.
This is likely to do bad things; for example, if the prompt is the shell command
prompt, then we would run into what looks like a deadlock bug in tcell. In other
cases, the characters in the following lines might be treated as random commands
after the prompt is confirmed.
Fixes#4890
When Git is configured with status.renames=copies, it can produce
status codes starting with "C" (copy) in addition to "R" (rename).
The file loader was only checking for "R" prefixes, causing copy
operations to be parsed incorrectly and breaking file staging.
This fix extends the status parser to handle both "R" and "C"
prefixes, ensuring proper support for Git's copy detection feature.
Fixes file staging issues when using status.renames=copies configuration.
We want to switch to have paragraphs consistently on one line, and auto-wrap
them automatically when generating Config.md.
The changes to Config.md in this commit are temporary.
Our logic to decide if a file needs to be checked out from the previous
commit or deleted because it didn't exist in the previous commit didn't
work for submodules. We were using `git cat-file -e` to ask whether the
file existed, but this returns an error for submodules, so we were
always deleting those instead of reverting them back to their previous
state.
Switch to using `git ls-tree -- file` instead, which works for both
files and submodules.
Fixes#4932.
Our logic to decide if a file needs to be checked out from the previous commit
or deleted because it didn't exist in the previous commit didn't work for
submodules. We were using `git cat-file -e` to ask whether the file existed, but
this returns an error for submodules, so we were always deleting those instead
of reverting them back to their previous state.
Switch to using `git ls-tree -- file` instead, which works for both files and
submodules.
It works for submodules too.
Also, pass file name and file content explicitly; the existing tests don't care
about these, but when writing tests that do, it makes them easier to understand.
Doesn't make a difference currently, since the title is either StatusTitle when
the dashboard is showing, or LogTitle when one of the branch logs is showing.
This is going to change in the next commit, though.
When cycling to the last branch log command, and then editing the config to
remove one or more log commands, lazygit would crash with an out of bounds panic
when returning to it. Fix this by resetting the log index to 0 when it is out of
bounds. (I think resetting to 0 is better than clamping, although it doesn't
matter much.)
I know that uint was chosen to document that it can't be negative (not sure why
the "8" was chosen, though). That's pointless in languages that don't enforce
this though: you can subtract 1 from uint8(0) and you'll get something that
doesn't make sense; that's not any better than getting -1. I'm not a fan of
using unsigned types in general (at least in languages like go or C++), and they
usually just make the code more cumbersome without real benefits.
For some of the git commands that lazygit uses, it needs to force the
language to English because it parses git's output and needs to react to
certain things. It used to do this by setting the locale to
`en_US.UTF-8`; some users reported that this locale isn't available on
their systems. Use the "C" locale instead, which achieves the same
result and is guaranteed to be available everywhere.
Fixes#4731.
Some users reported that en_US.UTF-8 is not available on their systems, leading
to warnings in the command log. "C" also forces the language to English, and is
guaranteed to be available everywhere.
Custom pagers are not supported on Windows, because using a pager in git
requires the git command to run in a PTY, but the PTY package we are
using doesn't support Windows.
However, there's a workaround to use a custom pager by using a
Powershell script configured as an external diff command. Document this
in the `Custom_Pagers.md` document, and export a `LAZYGIT_COLUMNS`
environment variable to allow such scripts to work better.
This makes it possible to pass it to an external diff command that is
used like a pager. An example for this can be seen in the added
documentation in the next commit.
This can be useful if you want to do some operation on the filtered
file, e.g. check it out using `c`, or enter the file to make a custom
patch from it.
Addresses #4935.
When lazygit detects that all conflicts have been resolved, it puts up a
popup asking whether the user wants to continue the merge or rebase.
However, it didn't rerender the main view of the conflicted file, so it
would still show the conflict markers, which is confusing. Add some
logic that updates the main view in this situation, behind the popup.
The logic in postRefreshUpdate would only rerender the main view if the context
being updated is the current view. This is not the case when a popup is showing;
but we still want to render the main view in that case, behind the popup. This
happens for example when we refresh the Files scope, we determine that all
conflicts have been resolved and show a popup asking to continue the merge or
rebase, but the postRefreshUpdate of the Files context only happens when the
popup is already showing, so we would still see the conflict markers behind the
popup, which is rather confusing.
Implements https://github.com/jesseduffield/lazygit/issues/2026. I also
tried to address issues mentioned in the
https://github.com/jesseduffield/lazygit/pull/3477 PR.
Previously, pressing `M` opened an external merge tool. Now it opens a
merge options menu that allows selecting all conflicts in chosen files
as **ours** (HEAD), **theirs** (incoming), or **union** (both), while
still providing access to the external merge tool.
This uses [git-merge-file](https://git-scm.com/docs/git-merge-file) for
a 3-way merge with the `--ours`, `--theirs`, and `--union` flags. This
approach avoids the issue mentioned in
https://github.com/jesseduffield/lazygit/discussions/1608#discussioncomment-13002595,
and correctly applies the chosen conflict resolutions while preserving
changes from other branches. The command is executed with `--object-id`,
which requires object IDs obtained via `rev-parse`, instead of relying
on the standard version that works with full saved files.
Replace merge-tool with merge options menu that allows resolving all
conflicts for selected files as ours, theirs, or union, while still
providing access to the merge tool.
The `normalisedSelectedNodes` function in `files_controller.go` had a
bug where it didn't work correctly for the root item (`/`). This PR
fixes that.
We don't have any tests for this bug. Apparently, the functions that use
this (staging and discarding files) also work correctly when they work
on a directory and then on the contained file again, that's why nobody
has noticed yet. I briefly looked into adding unit tests for the
function, but it was more work than I was willing to put into this right
now.
The root item's path is ".", and the path of a file at top level is "./file".
When using GetPath, this gives us "." and "file", respectively, and
isDescendentOfSelectedNodes would return false for these.
Working with the internal paths (i.e. without stripping the leading "./") fixes
this.
## PR Description
This PR adds Nix flake support to provide a reproducible development
environment and build process for `lazygit` contributors, devs, and
users.
Features:
- Nix Flake Configuration: Complete flake setup supporting multiple
architectures
- Development Shell: Pre-configured environment with Go toolchain,
linting tools, and development utilities
- Multiple Entry Points: Support for `nix develop`, `nix run`, and `nix
build`
Closes#3474.
### PR Description
This PR includes 2 changes:
1. Bump golangci-lint version to `v2.4.0` from `v.2.2.1`
1. Bump Go version to `1.25.0`:
- Bump Go version to `1.25` in `go.mod`
- Bump Go version to `1.25` in `ci.yml`
- Bump base image to `golang:1.25` in `Dockerfile`
### Reference
- [Go 1.25 release note](https://tip.golang.org/doc/go1.25)
I find the command "Checkout previous branch" quite useful, and I use it
a lot. However, I'm unhappy with the visual feedback, so this PR
improves that a bit.
Previously, the feedback you got when pressing "-" was just a "Checking
out..." status in the bottom line. This was both easy to miss if you are
used to looking for an inline status in the branches panel, and it
didn't provide information about which branch was being checked out,
which can be annoying in very large repos where checking out takes a
while, and you only see at the end if you are now on the right branch.
Improve this by trying to figure out which branch was the previously
checked out one, and then checking it out normally so that you get an
inline status next to it (as if you had pressed space on it). There are
cases where this fails, e.g. when the previously checked out ref was a
detached head, in which case we fall back to the previous behavior.
Previously, the feedback you got when pressing "-" was just a "Checking out..."
status in the bottom line. This was both easy to miss if you are used to looking
for an inline status in the branches panel, and it didn't provide information
about which branch was being checked out, which can be annoying in very large
repos where checking out takes a while, and you only see at the end if you are
now on the right branch.
Improve this by trying to figure out which branch was the previously checked out
one, and then checking it out normally so that you get an inline status next to
it (as if you had pressed space on it). There are cases where this fails, e.g.
when the previously checked out ref was a detached head, in which case we fall
back to the previous behavior.
When you delete a branch, we call this function to determine whether we
need to ask for confirmation of not. We don't want to log this, because
it's not a command that a user would normally use as part of this
operation.
When you delete a branch, we call this function to determine whether we need to
ask for confirmation of not. We don't want to log this, because it's not a
command that a user would normally use as part of this operation.
In all other menus besides the keybindings menu it makes sense to hide
keybindings that match the confirmMenu binding. This is important to
make it clear which action will be triggered when you press the key.
In the keybindings menu this is different; the main purpose of that menu
is not to allow triggering commands by their key while the menu is open,
but to serve as a reference for what the keybindings are when it is not
open. Because of this, it is more important to show all bindings in this
menu, even if they conflict with the confirmMenu key.
This fixes a regression introduced in b3a3410a1a.
Fixes#4879.
In all other menus besides the keybindings menu it makes sense to hide
keybindings that match the confirmMenu binding. This is important to make it
clear which action will be triggered when you press the key.
In the keybindings menu this is different; the main purpose of that menu is not
to allow triggering commands by their key while the menu is open, but to serve
as a reference for what the keybindings are when it is not open. Because of
this, it is more important to show all bindings in this menu, even if they
conflict with the confirmMenu key.
This fixes a regression introduced in b3a3410a1a.
### PR Description
Remapping `keybinding.universal.confirm` from `<enter>` to something
like `y` is currently impossible because the same keybinding is also
used to confirm prompts (e.g. "New branch") and the search prompt. Fix
this by hard-coding enter for those; it doesn't really make sense to use
any other key for prompts.
While at it, add separate bindings for `confirmMenu` and
`confirmSuggestion` for those who would like to have different keys for
these. Of these, `confirmMenu` could be a little tricky because menus
are sometimes used purely as a choice (e.g. in "Amend commit attribute"
or the global keybindings menu), in which case you might want to use
`<enter>`, but other times as a substitute for a confirmation (e.g. for
"Delete branch"), in which case you might want to remap to `y`. I don't
have a great idea what to do about that, to be honest. Feedback welcome.
In this PR we only take care of Confirm, which many people seem to be
concerned about. We might consider doing something similar for Esc, but
it seems less urgent, and I'm out of time now. 😄
This seemingly simple change required some serious refactoring under the
hood, so thorough testing would be good to ensure we didn't break
anything.
Closes#2611Closes#2767Closes#3471
Related: #2768
This is needed when remapping the confirmMenu key to, say, "y", and there's a
menu that has an item with a "y" binding. This already worked correctly (confirm
takes precedence, as desired), but it's still confusing to see the item binding.
It seems useful to have the flexibility to remap "enter" in confirmations to
"y", but keep "enter" for menus and suggestions (even though we sometimes use
menus as confirmations, but it's still good to give users the choice).
This one doesn't make a difference in practice because we don't remap the key in
tests, but if we would, then this would no longer work correctly. It's just more
correct this way.
The universal.confirm keybinding is the wrong one to use for this, we want
universal.goInto instead. They are both bound to "enter" by default, but when
remapping confirm to "y" we don't want to use that for entering worktrees.
Rebinding the universal.confirm keybinding currently doesn't make sense, because
the rebound key would also be used for editable prompts, which means you would
only be able to bind it to a ctrl key (not "y", which is desirable for some
people), and also it would allow you to enter a line feed in a branch name.
Fix this by always using enter for editable prompts.
So far, confirmations and prompts were handled by the same view, context, and
controller, with a bunch of conditional code based on whether the view is
editable. This was more or less ok so far, since it does save a little bit of
code duplication; however, now we need separate views, because we don't have
dynamic keybindings, but we want to map "confirm" to different keys in
confirmations (the "universal.confirm" user config) and prompts (hard-coded to
enter, because it doesn't make sense to customize it there).
It also allows us to get rid of the conditional code, which is a nice benefit;
and the code duplication is actually not *that* bad.
This fixes a crash in an interactive rebase when there's a merge command
in the rebase-todo file that doesn't have a comment. I don't know under
what circumstances this can happen; git itself doesn't produce these,
but it is theoretically possible for the user to do this manually by
doing `git rebase --edit-todo`, or third-party tools could do it too.
We had one user report a crash because of this, so it seems worth fixing
it.
Closes#4858.
This fixes a crash in an interactive rebase when there's a merge command in the
rebase-todo file that doesn't have a comment. I don't know under what
circumstances this can happen; git itself doesn't produce these, but it is
theoretically possible for the user to do this manually by doing `git rebase
--edit-todo`, or third-party tools could do it too.
We had one user report a crash because of this, so it seems worth fixing it.
### PR Description
When filtering by file path, dropping a range selection of stashes would
drop the wrong ones if those stashes would be noncontiguous in the
unfiltered list.
To fix the problem described in the previous commit, iterate backwards over the
stashes that we want to delete. This allows us to use their Index field.
### PR Description
This is similar to #2957, except that in that case it was about an
explicit fast-forward command, and we solved it by doing the
fast-forward in the other work-tree (so that it would fail if that
worktree had modified files, for example). In this case it is about the
relatively new auto-forward feature (added in v0.50, see #4493), and in
this case we fix it by not even trying to auto-forward any branches that
are checked out by other worktrees.
The test shows that we are currently auto-forwarding branches even if they are
checked out by another worktree; this is quite bad, because when you switch to
that other worktree you'll see that the files that are touched by the fetched
commits are all modified (which we don't test here).
### PR Description
This is similar to using lazygit's `Git.Paging.ExternalDiffCommand`
config, except that the command is configured in git. This can be done
either with git's `diff.external` config, or through `.gitattributes`,
so it gives a bit more flexibility.
We could consider removing the `Git.Paging.ExternalDiffCommand` config
now, because its functionality is covered by the new config. I decided
to keep it though, because I don't want to make this a breaking change,
and also because some users might want to have the external diff command
only in lazygit but not on the command line.
This is similar to using lazygit's Git.Paging.ExternalDiffCommand config, except
that the command is configured in git. This can be done either with git's
`diff.external` config, or through .gitattributes, so it gives a bit more
flexibility.
### PR Description
Many people don't understand what this means, which is apparent from the
amount of issues that got filed because of this. Let's get rid of it to
avoid this confusion. People will have to configure their pager twice if
they want to use it both on the command line and in lazygit, which I
think is not a big deal.
See
[here](https://github.com/jesseduffield/lazygit/issues/3704#issuecomment-2330772344)
for more rationale.
Closes#3704.
Many people don't understand what this means, which is apparent from the amount
of issues that got filed because of this. Let's get rid of it to avoid this
confusion. People will have to configure their pager twice if they want to use
it both on the command line and in lazygit, which I think is not a big deal.
### PR Description
When we added support for using external diff commands as pagers (mainly
to support difftastic as a pager) in #2868, we only supported this in
the files and commits panels, but not in the stashes panel. This was
forgotten in 6266e19623.
## **PR Description**
- Currently, `check-required-label` only runs when commits are added to
a PR, even if a maintainer has added labels, so the CI status remains
red until a commit is pushed after labels are added by a maintainer.
- I updated the workflows to run `check-required-label` only on label
events(add/remove) or open PR event.
- This will make PR status updates more accurate, so authors will be
able to see that tests and lint are passing by just checking the PR
status, and maintainers will easily know if the PR is ready for review.
## **PR Description**
Sometimes, I want to copy the error message to clipboard to search
google or ask to LLM about the error message.
So I added CopyToClipboard command to `ConfirmationController` and I
have confirmed that this command copies the content of the window to the
clipboard.
This was needed in an earlier version of the test, when we asserted the file
content in a more complicated way. It should have been removed in caca62b89e.
## ✨ Add Ctrl+Z suspend support for LazyGit on Unix-like systems
### 📝 Summary
This PR adds support for suspending LazyGit when the user presses
`Ctrl+Z`, making it behave like common CLI tools (e.g., Vim, less,
htop):
* Pressing `Ctrl+Z` sends a `SIGTSTP` signal to suspend LazyGit.
* After resuming with `fg`, LazyGit redraws and continues working
without hanging.
* During suspension, background routines are paused to avoid running
while LazyGit is stopped.
### ✅ Motivation
Make LazyGit feel more native on Unix-like systems by supporting
standard terminal suspend/resume (Ctrl+Z / fg) behavior.
Closes#3906
This frees up ctrl-z for suspend. Hopefully, redo is not such a frequently used
operation that the change annoys people.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
### PR Description
- For popup windows, the status bar would show `Confirm: <enter> |
Close/Cancel: <esc> | Cancel: <esc>`. Omit the second `<esc>`.
- Don't show the `<esc>` binding in other views when it doesn't do
anything.
- Change the text of the `<esc>` label to show what it does, based on
context. This is very helpful because esc can cancel all sorts of
things, and if several of these things are active at once, it is not
obvious which one will be cancelled first.
Supersedes #4808.
In some cases we set a disabled reason but leave the text empty, so that we
don't get an error toast when the item is invoked. In such a case it looks
awkward if there is a tooltip showing "Disabled: " with no following text.
For many menus, just "Close" is fine, but some menus act more like confirmations
(e.g. the menu that appears when you cherry-pick and get conflicts); in this
case, it's good to make it more obvious that hitting esc cancels the whole
thing.
Dismissing a range selection is handled by the global escape handler for all
list views, but not for the staging and patch building views, so we need to make
the esc description dynamic for these, too.
The main reason for this is that sometimes the escape key is handled by a local
binding, in which case it appears before the '?' binding in the options status
bar, and other times it is handled by the global controller, in which case it
appeared after. Moving it to before the keybindings menu handler makes it appear
before '?' in both cases.
Also, if the window is too narrow to show all keybindings, the ones that don't
fit will be truncated, and in this case it is more important to show the esc
binding because of its context sensitivity.
This also moves the esc entry up a few positions in the keybindings menu, but I
don't think this matters much.
Sometimes there is a local and a global keybinding for the same key; if both are
configured to be shown in the options map, we should only show the local one
because it takes precedence. This happens for example for <esc> in a popup, or
for <esc> in the focused main view.
Note that this is also a problem in the keybindings menu, and we don't solve
that here.
It's maybe not totally obvious, so let's show it.
Esc now appears twice in the status bar, because the global controller also
appends its generic "Cancel". We'll fix this in the next commit.
**PR Description**
This PR adds support for parsing **legacy Azure DevOps SSH remotes**
that use the
`vs-ssh.visualstudio.com` host, which is still common in older
repositories or corporate setups.
This PR fixes issue #2667.
Previously, even if users mapped this host to the Azure DevOps provider
via
`configServiceDomains`, URL generation failed with:
```
Failed to parse repo information from url
```
because the Azure DevOps `ServiceDefinition` regex set did not include
this SSH format.
### Changes
- Added a new regex to `azdoServiceDef.regexStrings` to match:
```
git@vs-ssh.visualstudio.com:v3/<org>/<project>/<repo>
```
- This allows `getRepoURLFromRemoteURL` to correctly extract `org`,
`project`, and `repo`
for these remotes.
- Added a test case to `TestGetPullRequestURL` verifying that mapping
`vs-ssh.visualstudio.com` → `azuredevops:dev.azure.com` produces the
correct PR URL.
### Example
With this config:
```yaml
services:
'vs-ssh.visualstudio.com': 'azuredevops:dev.azure.com'
```
and remote:
```
git@vs-ssh.visualstudio.com:v3/myorg/myproject/myrepo
```
`GetPullRequestURL("feature/new", "")` now returns:
```
https://dev.azure.com/myorg/myproject/_git/myrepo/pullrequestcreate?sourceRef=feature%2Fnew
```
### Why
- Many users still have remotes in this legacy format.
- This change is **backward-compatible** and does not affect existing
supported remotes.
- It unblocks URL generation for PRs and commits without requiring users
to change their remotes.
- Fixes#2667
An example for this can be seen in the next commit.
We make this a setter rather than an added constructor argument so that we don't
have to change all those contexts that don't want to make use of this.
This assertion didn't test anything useful, given that the filtered view already
has two lines. This should have been adapted in 9f0b4d0000 when we added
section headers while filtering.
- **PR Description**
We didn't take the worktree icon into account properly, so the
divergence indication was offset to the left by two characters in this
case.
I haven't used worktrees myself so far, so I didn't notice this before.
- **PR Description**
This PR adds to the documentation a way of installation using
[gah](https://github.com/marverix/gah/).
> gah is an GitHub Releases app installer, that does not require sudo.
It is a simple bash script that downloads the latest release of an app
from GitHub and installs it in `~/.local/bin`. It is designed to be used
with apps that are distributed as a single binary file.
## **PR Description**
The below error message is shown when executing `make format` when
`test/_results/demo/worktree_create_from_branches/actual/repo/src/shims.go`
exists (maybe executing integration test produces this file?).
```sh
$ make format
gofumpt -l -w .
test/_results/demo/worktree_create_from_branches/actual/repo/src/shims.go:1:20: expected 'package', found 'EOF'
make: *** [format] Error 2
```
I have confirmed it works without above error when I run `make format`
on this PR's branch.
One reason why git diff can be very slow is when "diff.algorithm =
histogram" is being used. In this case, showing a very long single-file
diff can take seconds to load, and you'll see the "loading..." message
in the main view until we got the first lines of the diff to show.
There's nothing really we can do about this delay; however, when
switching to another, shorter file (or commit) while the "loading..."
message is still showing, this switch should be instantaneous. And it
was before 0.54.0, but we broke this in 0.54.0 with 8d7740a5ac
(#4782); now users have to wait for the slow git diff command to output
more text before the switch occurs. To fix this, don't block waiting for
the process to terminate if we just stopped it.
In addition, improve CPU usage by terminating git processes gracefully
(by sending them a TERM signal); this helps keep CPU usage low when
flicking through several of these huge diffs with "diff.algorithm =
histogram", because it avoids having several git processes running in
the background, calculating expensive diffs that we are never going to
show. Unfortunately this is only possible on Linux and Mac, so Windows
users will have to live with the higher CPU usage. The recommended
workaround is to not use "diff.algorithm = histogram".
Fixes#4798.
The previous commit already fixed the user-visible lag, but there's still a
problem with multiple background git processes consuming resources calculating
diffs that we are never going to show. Improve this by terminating those
processes (by sending them a TERM signal).
Unfortunately this is only possible on Linux and Mac, so Windows users will have
to live with the higher CPU usage. The recommended workaround is to not use
"diff.algorithm = histogram".
One reason why git diff can be very slow is when "diff.algorithm = histogram" is
being used. In this case, showing a very long single-file diff can take seconds
to load, and you'll see the "loading..." message in the main view until we got
the first lines of the diff to show. There's nothing really we can do about this
delay; however, when switching to another, shorter file (or commit) while the
"loading..." message is still showing, this switch should be instantaneous. And
it was before 0.54.0, but we broke this in 0.54.0 with 8d7740a5ac (#4782); now
users have to wait for the slow git diff command to output more text before the
switch occurs.
To fix this, don't block waiting for the process to terminate if we just stopped
it.
Both of these badges have the coloring logic to show stable releases in blue,
and prereleases in orange. The criterion for a prerelease is that the major
version is 0. Now it is debatable whether we consider lazygit "stable", but I
don't feel we are in a preliminary state of the project, working towards the
first final 1.0 release, so I feel blue expresses the state of the project
better.
The old link was broken, it would have to be "Formula/l/lazygit.rb" instead of
"Formula/lazygit.rb".
However, I don't find it very useful to link to the raw formula file, so I
decided to change the link to point to the homebrew web page for lazygit.
When showing a confirmation whose text ends with a line feed, we would
make the popup panel one line less tall than it needs to be, so it would
show a scroll bar. One example where this occurred is the very first
popup that users ever see (the "seriously you rock" message for new
users); that's a pretty bad first impression.
This happens because our code to suppress trailing newlines in views
doesn't work for styled text, and the text in confirmations is bold.
This code checks if the last character of the text is a line feed, and
in this case it isn't; the escape sequence for turning bold off comes
after it.
We should really fix this by improving that mechanism, but this would
require some tricky logic, so as a quick fix, trim trailing (and
leading) linefeeds from the text that we display in a confirmation,
before making it bold.
When showing a confirmation whose text ended with a line feed, we would make the
popup panel one line less tall than it needs to be, so it would show a scroll
bar. One example where this occurred is the very first popup that users ever see
(the "seriously you rock" message for new users); that's a pretty bad first
impression.
This happens because our code to suppress trailing newlines in views doesn't
work for styled text, and the text in confirmations is bold. This code checks if
the last character of the text is a line feed, and in this case it isn't; the
escape sequence for turning bold off comes after it.
We should really fix this by improving that mechanism, but this would require
some tricky logic, so as a quick fix, trim trailing (and leading) linefeeds from
the text that we display in a confirmation, before making it bold.
It is being auto-bumped by homebrew, like most formulae these days, so
no reason for us to do that explicitly; and it actually fails with an
error message, so stop trying.
It is being auto-bumped by homebrew, like most formulae these days, so no reason
for us to do that explicitly; and it actually fails with an error message, so
stop trying.
In 3a9dbf7341 we created a global /tmp/lazygit/ folder that contains
the temp directories of each running instance, to avoid polluting /tmp
with multiple folders. The problem with that approach was that the
folder was created with 700 permissions, so if multiple users were using
lazygit on the same machine (e.g. a server), all users except the first
one would get fatal errors on startup.
Fix this by creating temp folders containing the user's uid.
Fixes#4793.
In 3a9dbf7341 we created a global /tmp/lazygit/ folder that contains the temp
directories of each running instance, to avoid polluting /tmp with multiple
folders. The problem with that approach was that the folder was created with 700
permissions, so if multiple users were using lazygit on the same machine (e.g. a
server), all users except the first one would get fatal errors on startup.
Fix this by creating temp folders containing the user's uid.
After discussion from the following PR (
https://github.com/jesseduffield/lazygit/pull/4362 ) I have finally
found time to make a PR to update the Fedora section of the README.md
file. I actually use those instructions myself from few different Fedora
and Amazon Linux 2023 machines.
Here is an example of installing lazygit from the Copr:
```
» sudo dnf install lazygit
Updating and loading repositories:
Repositories loaded.
Package Arch Version Repository Size
Installing:
lazygit x86_64 0.48.0-1.fc41 copr:copr.fedorainfracloud.org:dejan:lazygit 21.5 MiB
Transaction Summary:
Installing: 1 package
Total size of inbound packages is 6 MiB. Need to download 6 MiB.
After this operation, 22 MiB extra will be used (install 22 MiB, remove 0 B).
Is this ok [y/N]: y
[1/1] lazygit-0:0.48.0-1.fc41.x86_64 100% | 3.7 MiB/s | 5.7 MiB | 00m02s
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[1/1] Total 100% | 3.7 MiB/s | 5.7 MiB | 00m02s
Running transaction
[1/3] Verify package files 100% | 52.0 B/s | 1.0 B | 00m00s
[2/3] Prepare transaction 100% | 3.0 B/s | 1.0 B | 00m00s
[3/3] Installing lazygit-0:0.48.0-1.fc41.x86_64 100% | 44.9 MiB/s | 21.5 MiB | 00m00s
Complete!
```
# adapted from https://github.com/devcontainers/images/blob/main/src/go/.devcontainer/Dockerfile
# [Choice] Go version (use -bullseye variants on local arm64/Apple Silicon): 1, 1.19, 1.18, 1-bullseye, 1.19-bullseye, 1.18-bullseye, 1-buster, 1.19-buster, 1.18-buster
A clear and concise description of what the bug is.
**To Reproduce**
### To Reproduce
Steps to reproduce the behavior:
1. Go to '...'
@@ -17,20 +17,24 @@ Steps to reproduce the behavior:
3. Scroll down to '....'
4. See error
**Expected behavior**
### Expected behavior
A clear and concise description of what you expected to happen.
**Screenshots**
### Screenshots
If applicable, add screenshots to help explain your problem.
**Version info:**
_Run `lazygit --version` and paste the result here_
_Run `git --version` and paste the result here_
### Version info:
**Additional context**
* _Run `lazygit --version` and paste the result here_
### Terminal info:
What terminal are you using, and which version? For some types of bugs this information can be relevant.
### Additional context
Add any other context about the problem here.
**Note:** please try updating to the latest version or [manually building](https://github.com/jesseduffield/lazygit/#manual) the latest `master` to see if the issue still occurs.
> [!NOTE]
> Please try updating to the latest version or [manually building](https://github.com/jesseduffield/lazygit/#manual) the latest `master` to see if the issue still occurs.
<!--
If you want to try and debug this issue yourself, you can run `lazygit --debug` in one terminal panel and `lazygit --logs` in another to view the logs.
**Is your feature request related to a problem? Please describe.**
### Is your feature request related to a problem? Please describe.
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
**Describe the solution you'd like**
### Describe the solution you'd like
A clear and concise description of what you want to happen.
**Describe alternatives you've considered**
### Describe alternatives you've considered
A clear and concise description of any alternative solutions or features you've considered.
**Additional context**
### Additional context
Add any other context or screenshots about the feature request here.
<!--
You may be able to add your desired feature with a custom command. Check out the examples here: https://github.com/jesseduffield/lazygit/wiki/Custom-Commands-Compendium
If a custom command does what you want but you still want to see the feature built-in to lazygit, feel free to paste the custom command into the issue to help us better understand the functionality you want.
We also encourage you to put up a PR yourself! Who cares if you've never written Go before, neither did any of the existing contributors before their first lazygit PR! Check out the PR tutorial here: https://www.youtube.com/watch?v=kNavnhzZHtk&ab_channel=JesseDuffield
Also check out the contributing guide here: https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md
When contributing to this repository, please first discuss the change you wish
to make via issue, email, or any other method with the owners of this repository
before making a change.
In todays world of agentic coding I have decided that it no longer makes sense for me to look at incoming pull requests. As far as I can tell, the vast majority of these is AI-generated these days, which in itself is not necessarily a bad thing; however, there's no way for me to tell whether the person posting the PR actually understands anything about the code that is being contributed or not, and I don't feel like spending time and energy on finding out whether they do.
Now you might ask why this even matters; coding agents are capable of producing amazingly high-quality code, so why is it important that the person opening the PR understands it, as long as the code works and tests are green? It does actually matter very much to me. AI generated code needs to be carefully reviewed and iterated on, and it is the contributor's job to do that, not mine. And I have no idea to what extent the contributor has done this, or whether they are even capable of it.
Every PR needs work and iterations until it is mergeable, whether manually coded or AI generated (even very good ones do), and if I don't know whether the person posting the PR will act on my review feedback themselves or just pass it on to their coding agent (which I guess is the much more likely case today), then it doesn't make sense for me to work with them.
For this reason I will close incoming pull requests by default from now on, without comment. Sorry if this sounds hostile, but honestly I don't feel I have much of a choice if I want maintaining this project to still be enjoyable for me.
With that said, if you are indeed serious about contributing a high-quality PR to lazygit, and you are familiar with go, and you have learned enough about lazygit's code base to tell whether your changes are good, then do raise an issue and explain what you are planning to do, and somehow make it plausible that your PR will be worth my time reviewing it. In such a case I might make an exception from the default rule.
In the future I might also consider adopting a vouch system similar to [Ghostty's](https://github.com/ghostty-org/ghostty/blob/main/CONTRIBUTING.md#first-time-contributors), but right now I feel the effort needed to set this up and maintain is not justified given the rather low number of high-quality contributions I have seen in recent times.
Even though we no longer accept pull requests, I find it important to emphasize that Lazygit is still a community project, and non-PR contributions are still very welcome. Do file issues for bug reports or feature requests, and help shape the future of lazygit by actively participating in discussing UX designs. Also, the localization system very much depends on everybody's help with translating texts (see https://crowdin.com/project/lazygit).
---
The remainder of this document is the old version from a time when contributing pull requests was still encouraged. Keeping it here in case I reconsider my policy in the future.
## PR walkthrough
@@ -17,11 +31,12 @@ See [here](./VISION.md) for a set of design principles that we want to consider
* what the different packages in the codebase are for
* where important files live
* important concepts in the code
* how the event loop works
* other useful information
- what the different packages in the codebase are for
- where important files live
- important concepts in the code
- how the event loop works
- other useful information
## All code changes happen through Pull Requests
@@ -30,7 +45,7 @@ welcome your pull requests:
1. Fork the repo and create your branch from `master`.
2. If you've added code that should be tested, add tests.
3. If you've added code that need documentation, update the documentation.
3. If you've added code that needs documentation, update the documentation.
4. Write a [good commit message](http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html).
5. Issue that pull request!
@@ -38,6 +53,22 @@ Please do not raise pull request from your fork's master branch: make a feature
If you've never written Go in your life, then join the club! Lazygit was the maintainer's first Go program, and most contributors have never used Go before. Go is widely considered an easy-to-learn language, so if you're looking for an open source project to gain dev experience, you've come to the right place.
## Commit history
We value a clean and useful commit history, so please take some time to organize your commits so that they make sense. Don't assume that they will be squashed on merge anyway; we don't do that here.
In particular:
- Refactorings and behavior changes should be in separate commits. There are very few exceptions where this is not possible, but in my experience they are very rare.
- Strive for minimal commits; every change that is independent from other changes should be in a commit of its own (with a good commit message that explains why the change is made).
- When you need to iterate over your implementation during review (e.g. because you discovered a bug, or a maintainer requested changes), don't just pile new commits on top. Use fixup commits to make your changes transparent while still maintaining a good commit history. If you don't know what that means, [here's a brief introduction](docs/Fixup_Commits.md).
## A note about AI
It has become common recently to throw an issue at a coding agent and submit whatever comes out of it as a PR. This is not appreciated here, and I will close PRs where I can tell this was the case, or where I even suspect it was the case.
Some of these PRs may actually be good and useful, but many are not, and it's not a good use of my time as a maintainer to look at generated PRs to decide. This is the job of the PR's contributor, and if you don't speak enough go or can't be bothered to get familiar enough with lazygit's codebase to tell, then don't contribute the PR.
## Running in a VSCode dev container
If you want to spare yourself the hassle of setting up your dev environment yourself (i.e. installing Go, extensions, and extra tools), you can run the Lazygit code in a VSCode dev container like so:
@@ -45,8 +76,9 @@ If you want to spare yourself the hassle of setting up your dev environment your
* you have the dev containers extension installed in VSCode
- you have docker installed
- you have the dev containers extension installed in VSCode
See [here](https://code.visualstudio.com/docs/devcontainers/containers) for more info about dev containers.
@@ -60,6 +92,32 @@ To run lazygit from within the integrated terminal just go `go run main.go`
This allows you to contribute to Lazygit without needing to install anything on your local machine. The Codespace has all the necessary tools and extensions pre-installed.
## Using Nix for development
If you use Nix, you can leverage the included flake to set up a complete development environment with all necessary dependencies:
```sh
nix develop
```
This will drop you into a development shell that includes:
- Latest Go toolchain
- golangci-lint for code linting
- git and make
You can also build and run lazygit using nix:
```sh
# Build lazygit
nix build
# Run lazygit directly
nix run
```
The nix flake supports multiple architectures (x86_64-linux, aarch64-linux, x86_64-darwin, aarch64-darwin) and provides a consistent development environment across different systems.
## Code of conduct
Please note by participating in this project, you agree to abide by the [code of conduct].
@@ -118,10 +176,24 @@ Lazygit supports [Nerd Fonts](https://www.nerdfonts.com) to render certain icons
## Internationalisation
Boy that's a hard word to spell. Anyway, lazygit is translated into several languages within the pkg/i18n package. If you need to render text to the user, you should add a new field to the TranslationSet struct in `pkg/i18n/english.go` and add the actual content within the `EnglishTranslationSet()` method in the same file. Then you can access via `gui.Tr.YourNewText` (or `self.c.Tr.YourNewText`, etc). Although it is appreciated if you translate the text into other languages, it's not expected of you (google translate will likely do a bad job anyway!).
Boy that's a hard word to spell. Anyway, lazygit is translated into several languages within the pkg/i18n package.
### For developers adding new text
If you need to render text to the user, you should add a new field to the TranslationSet struct in `pkg/i18n/english.go` and add the actual content within the `EnglishTranslationSet()` method in the same file. Then you can access via `gui.Tr.YourNewText` (or `self.c.Tr.YourNewText`, etc).
Note, we use 'Sentence case' for everything (so no 'Title Case' or 'whatever-it's-called-when-there's-no-capital-letters-case')
### For translators
Lazygit translations are managed through [Crowdin](https://crowdin.com/project/lazygit/). If you'd like to contribute translations:
1. Join the Crowdin project at https://crowdin.com/project/lazygit/
2. Select your target language and help translate missing strings
3. The translation files in `pkg/i18n/translations/` are managed by the maintainers - please don't edit them directly
For detailed information about the translation process, including how maintainers sync translations, see `pkg/i18n/translations/README.md`.
## Debugging
The easiest way to debug lazygit is to have two terminal tabs open at once: one for running lazygit (via `go run main.go -debug` in the project root) and one for viewing lazygit's logs (which can be done via `go run main.go --logs` or just `lazygit --logs`).
@@ -8,13 +8,13 @@ Lazygit's vision is to be the most enjoyable UI for git.
There are seven (sometimes contradictory) design principles we follow:
-Dicoverability
-Simplicity
-Safety
-Power
-Speed
- Conformity with git
- Think of the codebase
-[Discoverability](#discoverability)
-[Simplicity](#simplicity)
-[Safety](#safety)
-[Power](#power)
-[Speed](#speed)
-[Conformity with git](#conformity-with-git)
-[Think of the codebase](#think-of-the-codebase)
### Discoverability
@@ -45,6 +45,7 @@ The git CLI is very complex but most git use cases are simple. Lazygit needs to
- Don't overwhelm the user with options
- Use sensible defaults
- We already have too many configuration options: think hard before adding any new ones
- A bit of elaboration on this one: in the past we made the mistake of adding new config options all the time for unimportant things. The thinking was: one user wants to have this new feature or behavior, we are not sure if everybody will like it, so we hide it behind a config. This seems good because we satisfy everybody's needs, but it's bad because if Config.md is pages and pages of text, most users will not bother reading all of it, so they won't be aware of the actually useful options among all the obscure ones. We should be much more conservative about adding new config options that only few users are likely to use.
### Safety
@@ -55,7 +56,7 @@ It's easy to screw things up in git so Lazygit should try to protect the user fr
- e.g. undo action
- the escape key should get you out of most transient situations (rebasing, diffing, etc)
## Power
### Power
Users shouldn't have to drop down the CLI _too_ often. Lazygit should be able to handle some complex use cases.
Looking at the command assigned to the 'n' key, here's what the result looks like:
Custom command keybindings will appear alongside inbuilt keybindings when you view the keybindings menu by pressing '?':
For a given custom command, here are the allowed fields:
| _field_ | _description_ | required |
|-----------------|----------------------|-|
| key | The key to trigger the command. Use a single key or list of keys, as described in [Custom_Keybindings.md](https://github.com/jesseduffield/lazygit/blob/master/docs/keybindings/Custom_Keybindings.md). Custom commands without a key specified can be triggered by selecting them from the keybindings (`?`) menu | no |
| command | The command to run (using Go template syntax for placeholder values) | yes |
| context | The context in which to listen for the key (see [below](#contexts)) | yes |
| prompts | A list of prompts that will request user input before running the final command | no |
| loadingText | Text to display while waiting for command to finish | no |
| description | Label for the custom command when displayed in the keybindings menu | no |
| output | Where the output of the command should go. 'none' discards it, 'terminal' suspends lazygit and runs the command in the terminal (useful for commands that require user input), 'log' streams it to the command log, 'logWithPty' is like 'log' but runs the command in a pseudo terminal (can be useful for commands that produce colored output when the output is a terminal), and 'popup' shows it in a popup. | no |
| outputTitle | The title to display in the popup panel if output is set to 'popup'. If left unset, the command will be used as the title. | no |
| after | Actions to take after the command has completed | no |
Here are the options for the `after` key:
| _field_ | _description_ | required |
|-----------------|----------------------|-|
| checkForConflicts | true/false. If true, check for merge conflicts | no |
| type | One of 'input', 'confirm', 'menu', 'menuFromCommand' | yes |
| title | The title to display in the popup panel | no |
| key | Used to reference the entered value from within the custom command. E.g. a prompt with `key: 'Branch'` can be referred to as `{{.Form.Branch}}` in the command | yes |
| condition | A Go template expression; if it resolves to empty string or `false`, the prompt is skipped. See [Conditional prompts](#conditional-prompts) | no |
| options | The options to display in the menu | yes |
The permitted option fields are:
| _field_ | _description_ | _required_ |
|-----------------|----------------------|-|
| name | The first part of the label | no |
| description | The second part of the label | no |
| value | the value that will be used in the command | yes |
| key | Keybinding to invoke this menu option without needing to navigate to it. Use a single key or list of keys, as described in [Custom_Keybindings.md](https://github.com/jesseduffield/lazygit/blob/master/docs/keybindings/Custom_Keybindings.md) | no |
If an option has no name the value will be displayed to the user in place of the name, so you're allowed to only include the value like so:
```yml
customCommands:
- key:'a'
command:'echo {{.Form.BranchType | quote}}'
context:'commits'
prompts:
- type:'menu'
title:'What kind of branch is it?'
key:'BranchType'
options:
- value:'feature'
- value:'hotfix'
- value:'release'
```
Here's an example of supplying more detail for each option:
```yml
customCommands:
- key:'a'
command:'echo {{.Form.BranchType | quote}}'
context:'commits'
prompts:
- type:'menu'
title:'What kind of branch is it?'
key:'BranchType'
options:
- value:'feature'
name:'feature branch'
description:'branch based off develop'
- value:'hotfix'
name:'hotfix branch'
description:'branch based off main for fast bug fixes'
- value:'release'
name:'release branch'
description:'branch for a release'
```
Here's an example of supplying keybindings for menu options:
```yml
customCommands:
- key:'a'
command:'echo {{.Form.BranchType | quote}}'
context:'commits'
prompts:
- type:'menu'
title:'What kind of branch is it?'
key:'BranchType'
options:
- value:'feature'
name:'feature branch'
description:'branch based off develop'
key:'f'
- value:'hotfix'
name:'hotfix branch'
description:'branch based off main for fast bug fixes'
key:'h'
- value:'release'
name:'release branch'
description:'branch for a release'
key:'r'
```
In this example, pressing 'f', 'h', or 'r' will directly select the corresponding option without needing to navigate to it first.
| command | The command to run to generate menu options | yes |
| filter | The regexp to run specifying groups which are going to be kept from the command's output | no |
| valueFormat | How to format matched groups from the filter to construct a menu item's value | no |
| labelFormat | Like valueFormat but for the labels. If `labelFormat` is not specified, `valueFormat` is shown instead. | no |
Here's an example using named groups in the regex. Notice how we can pipe the label to a colour function for coloured output (available colours [here](https://github.com/jesseduffield/lazygit/blob/master/docs/Config.md))
```yml
- key :'a'
description:'Checkout a remote branch as FETCH_HEAD'
In this example the 'Branch prefix' menu only appears if the user chose 'With prefix'. Otherwise it is skipped and `.Form.Prefix` defaults to empty string.
## Placeholder values
Your commands can contain placeholder strings using Go's [template syntax](https://jan.newmarch.name/golang/template/chapter-template.html). The template syntax is pretty powerful, letting you do things like conditionals if you want, but for the most part you'll simply want to be accessing the fields on the following objects:
```
SelectedCommit
SelectedCommitRange
SelectedFile
SelectedPath
SelectedSubmodule
SelectedLocalBranch
SelectedRemoteBranch
SelectedRemote
SelectedTag
SelectedStashEntry
SelectedCommitFile
SelectedWorktree
CheckedOutBranch
```
(For legacy reasons, `SelectedLocalCommit`, `SelectedReflogCommit`, and `SelectedSubCommit` are also available, but they are deprecated.)
To see what fields are available on e.g. the `SelectedFile`, see [here](https://github.com/jesseduffield/lazygit/blob/master/pkg/gui/services/custom_commands/models.go) (all the modelling lives in the same file).
We don't support accessing all elements of a range selection yet. We might add this in the future, but as a special case you can access the range of selected commits by using `SelectedCommitRange`, which has two properties `.To` and `.From` which are the hashes of the bottom and top selected commits, respectively. This is useful for passing them to a git command that operates on a range of commits. For example, to create patches for all selected commits, you might use
If your custom keybinding collides with an inbuilt keybinding that is defined for the same context, only the custom keybinding will be executed. This also applies to the global context. However, one caveat is that if you have a custom keybinding defined on the global context for some key, and there is an in-built keybinding defined for the same key and for a specific context (say the 'files' context), then the in-built keybinding will take precedence. See how to change in-built keybindings [here](https://github.com/jesseduffield/lazygit/blob/master/docs/Config.md#keybindings)
## Menus of custom commands
For custom commands that are not used very frequently it may be preferable to hide them in a menu; you can assign a key to open the menu, and the commands will appear inside. This has the advantage that you don't have to come up with individual unique keybindings for all those commands that you don't use often; the keybindings for the commands in the menu only need to be unique within the menu. Here is an example:
description:"Paste selected commits from clipboard"
```
If you use the commandMenu property, none of the other properties except key and description can be used.
## Debugging
If you want to verify that your command actually does what you expect, you can wrap it in an 'echo' call and set `output: popup` so that it doesn't actually execute the command but you can see how the placeholders were resolved.
## More Examples
See the [wiki](https://github.com/jesseduffield/lazygit/wiki/Custom-Commands-Compendium) page for more examples, and feel free to add your own custom commands to this page so others can benefit!
Lazygit supports custom pagers, [configured](/docs/Config.md) in the config.yml file (which can be opened by pressing `e` in the Status panel).
Multiple pagers are supported; you can cycle through them with the `|` key. This can be useful if you usually prefer a particular pager, but want to use a different one for certain kinds of diffs.
Pagers are configured with the `pagers` array in the git section; here's an example for a multi-pager setup (use an empty object `{}` for the default builtin diff display that doesn't use a pager):
The `colorArg` key is for whether you want the `--color=always` arg in your `git diff` command. Some pagers want it set to `always`, others want it set to `never`. The default is `always`, since that's what most pagers need.
## Delta:
```yaml
git:
pagers:
- pager:delta --dark --paging=never
```
A cool feature of delta is --hyperlinks, which renders clickable links for the line numbers in the left margin, and lazygit supports these. To use them, set the `pager:` config to `delta --dark --paging=never --line-numbers --hyperlinks --hyperlinks-file-link-format="lazygit-edit://{path}:{line}"`; this allows you to click on an underlined line number in the diff to jump right to that same line in your editor.
Note that delta's `--navigate` option doesn't work in lazygit, for technical reasons.
## Diff-so-fancy
```yaml
git:
pagers:
- pager:diff-so-fancy
```
## ydiff
```yaml
gui:
sidePanelWidth:0.2# gives you more space to show things side-by-side
Be careful with this one, I think the homebrew and pip versions are behind master. I needed to directly download the ydiff script to get the no-pager functionality working.
## Using external diff commands
Some diff tools can't work as a simple pager like the ones above do, because they need access to the entire diff, so just post-processing git's diff is not enough for them. The most notable example is probably [difftastic](https://difftastic.wilfred.me.uk).
These can be used in lazygit by using the `externalDiffCommand` config; in the case of difftastic, that could be
```yaml
git:
pagers:
- externalDiffCommand:difft --color=always
```
The `colorArg` option is not used in this case.
You can add whatever extra arguments you prefer for your difftool; for instance
This can also be used for normal git diffs with custom parameters, such as `--color-words` or `--word-diff` which some people find useful. To do that, save a script like this to, say, `~/bin/color-words.sh`:
Instead of setting this command in lazygit's `externalDiffCommand` config, you can also tell lazygit to use the external diff command that is configured in git itself (`diff.external`), by using
```yaml
git:
pagers:
- useExternalDiffGitConfig:true
```
This can be useful if you also want to use it for diffs on the command line, and it also has the advantage that you can configure it per file type in `.gitattributes`; see https://git-scm.com/docs/gitattributes#_defining_an_external_diff_driver.
`pager`, `externalDiffCommand`, and `useExternalDiffGitConfig` are alternative ways of producing the diff, so a pager entry may use at most one of them.
Some actions can be performed on a range of contiguous items. For example:
* staging multiple files at once
* squashing multiple commits at once
* copying (for cherry-pick) multiple commits at once
There are two ways to select a range of items:
1. Sticky range select: Press 'v' to toggle range select, then expand the selection using the up/down arrow key. To reset the selection, press 'v' again.
2. Non-sticky range select: Press shift+up or shift+down to expand the selection. To reset the selection, press up/down without shift.
The sticky option will be more familiar to vim users, and the second option will feel more natural to users who aren't used to doing things in a modal way.
In order to perform an action on a range of items, simply press the normal key for that action. If the action only works on individual items, it will raise an error. This is a new feature and the plan is to incrementally support range select for more and more actions. If there is an action you would like to support range select which currently does not, please raise an issue in the repo.
Depending on the currently focused view, hitting '/' will bring up a filter or search prompt. When filtering, the contents of the view will be filtered down to only those lines which match the query string. When searching, the contents of the view are not filtered, but matching lines are highlighted and you can iterate through matches with `n`/`N`.
We intend to support filtering for the files view soon, but at the moment it uses searching. We intend to continue using search for the commits view because you typically care about the commits that come before/after a matching commit.
If you would like both filtering and searching to be enabled on a given view, please raise an issue for this.
## Filtering files by status
You can filter the files view to only show staged/unstaged files by pressing `<c-b>` in the files view.
## Filtering commits by file path
You can filter the commits view to only show commits which contain changes to a given file path.
You can do this in a couple of ways:
1) Start lazygit with the -f flag e.g. `lazygit -f my/path`
2) From within lazygit, press `<c-s>` and then enter the path of the file you want to filter by
You can undo the last action by pressing 'z' and redo with 'Z' (shift+z). Here we drop a couple of commits and then undo the actions.
Undo uses the reflog which is specific to commits and branches so we can't undo changes to the working tree or stash.
## How it works
If you're as clumsy as me you'll probably have felt the pain of botching an interactive rebase or doing a hard reset onto the wrong commit. Luckily, the reflog allows you to trace your steps and make things right again, but I personally can't stand trying to make sense of the reflog.
Lazygit can read through your reflog for you and walk back action by action so that you don't even need to read the reflog. If lazygit finds a reflog entry where you checked out a branch, we'll checkout the original branch. If the entry is from a commit being applied, we'll go back to the commit before that. If we hit an interactive rebase, we'll go back to the commit you were on just before you started it.
## You can even undo things you did outside of lazygit!
Because lazygit just uses the reflog to keep track of things, it doesn't matter whether you're trying to undo something you did in lazygit or directly on the command line. You can open lazygit for the first time and start undoing thing in your repo! Likewise, lazygit marks its undos/redos in the reflog so if you quit the application and come back, lazygit still knows where you're up to.
## Limitations
There are limitations: firstly, lazygit can only undo things that are recorded in the reflog. That means changes to your working tree or stash aren't covered. Secondly, anything permanent you do like pushing to a remote can't be undone. Thirdly, actions like creating a branch won't be undone, because they're not stored in the reflog.
If you are mid-rebase, undo/redo is not supported, because the reflog doesn't contain enough information about what specific things have happened inside that rebase. If you want to undo out of a rebase, it's best to abort the rebase (the default keybinding for bringing up rebase options is 'm').
Undo/Redo is a new feature so if you find a bug let us know. The worst case scenario is that you'll just need to look at your reflog and manually put yourself back on track.
This topic deserves its own doc because there are a few touch points for it. We have a use-case for knowing when Lazygit is idle or busy because integration tests follow the following process:
1) press a key
2) wait until Lazygit is idle
3) run assertion / press another key
4) repeat
In the past the process was:
1) press a key
2) run assertion
3) if assertion fails, wait a bit and retry
4) repeat
The old process was problematic because an assertion may give a false positive due to the contents of some view not yet having changed since the last key was pressed.
## The solution
First, it's important to distinguish three different types of goroutines:
* The UI goroutine, of which there is only one, which infinitely processes a queue of events
* Worker goroutines, which do some work and then typically enqueue an event in the UI goroutine to display the results
* Background goroutines, which periodically spawn worker goroutines (e.g. doing a git fetch every minute)
The point of distinguishing worker goroutines from background goroutines is that when any worker goroutine is running, we consider Lazygit to be 'busy', whereas this is not the case with background goroutines. It would be pointless to have background goroutines be considered 'busy' because then Lazygit would be considered busy for the entire duration of the program!
In gocui, the underlying package we use for managing the UI and events, we keep track of how many busy goroutines there are using the `Task` type. A task represents some work being done by lazygit. The gocui Gui struct holds a map of tasks and allows creating a new task (which adds it to the map), pausing/continuing a task, and marking a task as done (which removes it from the map). Lazygit is considered to be busy so long as there is at least one busy task in the map; otherwise it's considered idle. When Lazygit goes from busy to idle, it notifies the integration test.
It's important that we play by the rules below to ensure that after the user does anything, all the processing that follows happens in a contiguous block of busy-ness with no gaps.
### Spawning a worker goroutine
Here's the basic implementation of `OnWorker` (using the same flow as `WaitGroup`s):
```go
func(g*Gui)OnWorker(ffunc(*Task)){
task:=g.NewTask()
gofunc(){
f(task)
task.Done()
}()
}
```
The crucial thing here is that we create the task _before_ spawning the goroutine, because it means that we'll have at least one busy task in the map until the completion of the goroutine. If we created the task within the goroutine, the current function could exit and Lazygit would be considered idle before the goroutine starts, leading to our integration test prematurely progressing.
You typically invoke this with `self.c.OnWorker(f)`. Note that the callback function receives the task. This allows the callback to pause/continue the task (see below).
### Spawning a background goroutine
Spawning a background goroutine is as simple as:
```go
goutils.Safe(f)
```
Where `utils.Safe` is a helper function that ensures we clean up the gui if the goroutine panics.
### Programmatically enqueueing a UI event
This is invoked with `self.c.OnUIThread(f)`. Internally, it creates a task before enqueuing the function as an event (including the task in the event struct) and once that event is processed by the event queue (and any other pending events are processed) the task is removed from the map by calling `task.Done()`.
### Pressing a key
If the user presses a key, an event will be enqueued automatically and a task will be created before (and `Done`'d after) the event is processed.
## Special cases
There are a couple of special cases where we manually pause/continue the task directly in the client code. These are subject to change but for the sake of completeness:
### Writing to the main view(s)
If the user focuses a file in the files panel, we run a `git diff` command for that file and write the output to the main view. But we only read enough of the command's output to fill the view's viewport: further loading only happens if the user scrolls. Given that we have a background goroutine for running the command and writing more output upon scrolling, we create our own task and call `Done` on it as soon as the viewport is filled.
### Requesting credentials from a git command
Some git commands (e.g. git push) may request credentials. This is the same deal as above; we use a worker goroutine and manually pause continue its task as we go from waiting on the git command to waiting on user input. This requires passing the task through to the `Push` method so that it can be paused/continued.
*`pkg/app`: Contains startup code, initialises a bunch of stuff like logging, the user config, etc, before starting the gui. Catches and handles some errors that the gui raises.
*`pkg/app/daemon`: Contains code relating to the lazygit daemon. This could be better named: it's is not a daemon in the sense that it's a long-running background process; rather it's a short-lived background process that we pass to git for certain tasks, like GIT_EDITOR for when we want to set the TODO file for an interactive rebase.
*`pkg/cheatsheet`: Generates the keybinding cheatsheets in `docs/keybindings`.
*`pkg/commands/git_commands`: All communication to the git binary happens here. So for example there's a `Checkout` method which calls `git checkout`.
*`pkg/commands/oscommands`: Contains code for talking to the OS, and for invoking commands in general
*`pkg/commands/git_config`: Reading of the git config all happens here.
*`pkg/commands/hosting_service`: Contains code that is specific to git hosting services (aka forges).
*`pkg/commands/models`: Contains model structs that represent commits, branches, files, etc.
*`pkg/commands/patch`: Contains code for parsing and working with git patches
*`pkg/common`: Contains the `Common` struct which holds common dependencies like the logger, i18n, and the user config. Most structs in the code will have a field named `c` which holds a common struct (or a derivative of the common struct).
*`pkg/config`: Contains code relating to the Lazygit user config. Specifically `pkg/config/user_config/go` defines the user config struct and its default values. See [below](#using-userconfig) for some important information about using it.
*`pkg/constants`: Contains some constant strings (e.g. links to docs)
*`pkg/env`: Contains code relating to setting/getting environment variables
*`pkg/i18n`: Contains internationalised strings
*`pkg/integration`: Contains end-to-end tests
*`pkg/jsonschema`: Contains generator for user config JSON schema.
*`pkg/logs`: Contains code for instantiating the logger and for tailing the logs via `lazygit --logs`
*`pkg/tasks`: Contains code for running asynchronous tasks: mostly related to efficiently rendering command output to the main window.
*`pkg/theme`: Contains code related to colour themes.
*`pkg/updates`: Contains code related to Lazygit updates (checking for update, download and installing the update)
*`pkg/utils`: Contains lots of low-level helper functions
*`pkg/gui`: Contains code related to the gui. We've still got a God Struct in the form of our Gui struct, but over time code has been moved out into contexts, controllers, and helpers, and we intend to continue moving more code out over time.
*`pkg/gui/context`: Contains code relating to contexts. There is a context for each view e.g. a branches context, a tags context, etc. Contexts manage state related to the view and receive keypresses.
*`pkg/gui/controllers`: Contains code relating to controllers. Controllers define a list of keybindings and their associated handlers. One controller can be assigned to multiple contexts, and one context can contain multiple controllers.
*`pkg/gui/controllers/helpers`: Contains code that is shared between multiple controllers.
*`pkg/gui/filetree`: Contains code relating to the representation of filetrees.
*`pkg/gui/keybindings`: Contains code for mapping between keybindings and their labels
*`pkg/gui/mergeconflicts`: Contains code relating to the handling of merge conflicts
*`pkg/gui/modes`: Contains code relating to the state of different modes e.g. cherry picking mode, rebase mode.
*`pkg/gui/patch_exploring`: Contains code relating to the state of patch-oriented views like the staging view.
*`pkg/gui/popup`: Contains code that lets you easily raise popups
*`pkg/gui/presentation`: Contains presentation code i.e. code concerned with rendering content inside views
*`pkg/gui/services/custom_commands`: Contains code related to user-defined custom commands.
*`pkg/gui/status`: Contains code for invoking loaders and toasts
*`pkg/gui/style`: Contains code for specifying text styles (colour, bold, etc)
*`pkg/gui/types`: Contains various gui-specific types and interfaces. Lots of code lives here to avoid circular dependencies
*`vendor/github.com/jesseduffield/gocui`: Gocui is the underlying library used for handling the gui event loop, handling keypresses, and rendering the UI. It defines the View struct which our own context structs build upon.
## Important files
*`pkg/config/user_config.go`: defines the user config and default values
*`pkg/gui/keybindings.go`: defines keybindings which have not yet been moved into a controller (originally all keybindings were defined here)
*`pkg/gui/controllers.go`: links up controllers with contexts
*`pkg/gui/controllers/helpers/helpers.go`: defines all the different helper structs
*`pkg/commands/git.go`: defines all the different git command structs
*`pkg/gui/gui.go`: defines the top-level gui state and gui initialisation/run code
*`pkg/gui/layout.go`: defines what happens on each render
*`pkg/gui/controllers/helpers/window_arrangement_helper.go`: defines the layout of the UI and the size/position of each window
*`pkg/gui/context/context.go`: defines the different contexts
*`pkg/gui/context/setup.go`: defines initialisation code for all contexts
*`pkg/gui/context.go`: manages the lifecycle of contexts, the context stack, and focus changes.
*`pkg/gui/types/views.go`: defines views
*`pkg/gui/views.go`: defines the ordering of views (front to back) and their initialisation code
*`pkg/gui/gui_common.go`: defines gui-specific methods that all controllers and helpers have access to
*`pkg/i18n/english.go`: defines the set of i18n strings and their English values
*`pkg/gui/controllers/helpers/refresh_helper.go`: manages refreshing of models. The refresh helper is typically invoked at the end of an action to re-load affected models from git (e.g. re-load branches after doing a git pull)
*`pkg/gui/controllers/quit_actions.go`: contains code that runs when you hit 'escape' on a view (assuming the view doesn't define its own escape handler)
*`vendor/github.com/jesseduffield/gocui/gui.go`: defines the gocui gui struct
*`vendor/github.com/jesseduffield/gocui/view.go`: defines the gocui view struct
## Concepts
* **View**: Views are defined in the gocui package, and they maintain an internal buffer of content which is rendered each time the screen is drawn.
* **Context**: A context is tied to a view and contains some additional state and logic specific to that view e.g. the branches context has code relating specifically to branches, and writes the list of branches to the branches view. Views and contexts share some responsibilities for historical reasons.
* **Controller**: A controller defined keybindings with associated handlers. One controller can be assigned to multiple contexts and one context can have multiple controllers. For example the list controller handles keybindings relating to navigating a list, and is assigned to all list contexts (e.g. the branches context).
* **Helper**: A helper defines shared code used by controllers, or used by some other parts of the application. Often a controller will have a method that ends up needing to be used by another controller, so in that case we move the method out into a helper so that both controllers can use it. We need to do this because controllers cannot refer to other controllers' methods.
In terms of dependencies, controllers sit at the highest level, so they can refer to helpers, contexts, and views (although it's preferable for view-specific code to live in contexts). Helpers can refer to contexts and views, and contexts can only refer to views. Views can't refer to contexts, controllers, or helpers.
* **Window**: A window is a section of the screen which will render a view. Windows are named after the default view that appears there, so for example there is a 'stash' window that is so named because by default the stash view appears there. But if you press enter on a stash entry, the stash entry's files will be shown in a different view, but in the same window.
* **Panel**: The term 'panel' is still used in a few places to refer to either a view or a window, and it's a term that is now deprecated in favour of 'view' and 'window'.
* **Tab**: Each tab in a window (e.g. Files, Worktrees, Submodules) actually has a corresponding view which we bring to the front upon changing tabs.
* **Model**: Representation of a git object e.g. commits, branches, files.
* **ViewModel**: Used by a context to maintain state related to the view.
* **Keybinding**: A keybinding associates a _key_ with an _action_. For example if you press the 'down' arrow, the action performed will be your cursor moving down a list by one.
* **Action**: An action is the thing that happens when you press a key. Often an action will invoke a git command, but not always: for example, navigation actions don't involve git.
* **Common structs**: Most structs have a field named `c` which contains a 'common' struct: a struct containing a bag of dependencies that most structs of the same layer require. For example if you want to access a helper from a controller you can do so with `self.c.Helpers.MyHelper`.
## Event loop and threads
The event loop is managed in the `MainLoop` function of `vendor/github.com/jesseduffield/gocui/gui.go`. Any time there is an event like a key press or a window resize, the event will be processed and then the screen will be redrawn. This involves calling the `layout` function defined in `pkg/gui/layout.go`, which lays out the windows and invokes some on-render hooks.
Often, as part of handling a keypress, we'll want to run some code asynchronously so that it doesn't block the UI thread. For this we'll typically run `self.c.OnWorker(myFunc)`. If the worker wants to then do something on the UI thread again it can call `self.c.OnUIThread(myOtherFunc)`.
## Using UserConfig
The UserConfig struct is loaded from lazygit's global config file (and possibly repo-specific config files). It can be re-loaded while lazygit is running, e.g. when the user edits one of the config files. In this case we should make sure that any new or changed config values take effect immediately. The easiest way to achieve this is what we do in most controllers or helpers: these have a pointer to the `common.Common` struct, which contains the UserConfig, and access it from there. Since the UserConfig instance in `common.Common` is updated whenever we reload the config, the code can be sure that it always uses an up-to-date value, and there's nothing else to do.
If that's not possible for some reason, see if you can add code to `Gui.onUserConfigLoaded` to update things from the new config; there are some examples in that function to use as a guide. If that's too hard to do too, add the config to the list in `Gui.checkForChangedConfigsThatDontAutoReload` so that the user is asked to quit and restart lazygit.
## Legacy code structure
Before we had controllers and contexts, all the code lived directly in the gui package under a gui God Struct. This was fairly bloated and so we split things out to have a better separation of concerns. Nonetheless, it's a big effort to migrate all the code so we still have some logic in the gui struct that ought to live somewhere else. Likewise, we have some keybindings defined in `pkg/gui/keybindings.go` that ought to live on a controller (all keybindings used to be defined in that one file).
The new structure has its own problems: we don't have a clear guide on whether code should live in a controller or helper. The current approach is to put code in a controller until it's needed by another controller, and to then extract it out into a helper. We may be better off just putting code in helpers to start with and leaving controllers super-thin, with the responsibility of just pairing keys with corresponding helper functions. But it's not clear to me if that would be better than the current approach.
We want our demo recordings to be consistent and easy to update if we make changes to Lazygit's UI. Luckily for us, we have an existing recording system for the sake of our integration tests, so we can piggyback on that.
You'll want to familiarise yourself with how integration tests are written: see [here](../../pkg/integration/README.md).
## Prerequisites
Ideally we'd run this whole thing through docker but we haven't got that working. So you will need:
tar -xf DejaVuSansMono.tar.xz -C /usr/local/share/fonts && \
rm DejaVuSansMono.tar.xz
```
## Creating a demo
Demos are found in `pkg/integration/tests/demo/`. They are like regular integration tests but have `IsDemo: true` which has a few effects:
* The bottom row of the UI is quieter so that we can render captions
* Fetch/Push/Pull have artificial latency to mimic a network request
* The loader at the bottom-right does not appear
In demos, we don't need to be as strict in our assertions as we are in tests. But it's still good to have some basic assertions so that if we automate the process of updating demos we'll know if one of them has broken.
You can use the same flow as we use with integration tests when you're writing a demo:
* Setup the repo
* Run the demo in sandbox mode to get a feel of what needs to happen
* Come back and write the code to make it happen
### Adding captions
It's good to add captions explaining what task if being performed. Use the existing demos as a guide.
### Setting up the assets worktree
We store assets (which includes demo recordings) in the `assets` branch, which is a branch that shares no history with the main branch and exists purely for storing assets. Storing them separately means we don't clog up the code branches with large binaries.
The scripts and demo definitions live in the code branches but the output lives in the assets branch so to be able to create a video from a demo you'll need to create a linked worktree for the assets branch which you can do with:
```sh
git worktree add .worktrees/assets assets
```
Outputs will be stored in `.worktrees/assets/demos/`. We'll store three separate things:
* the yaml of the recording
* the original gif
* either the compressed gif or the mp4 depending on the output you chose (see below)
### Recording the demo
Once you're happy with your demo you can record it using:
_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
# Lazygit Keybindings
## Global keybindings
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+r> `` | Switch to a recent repo | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Scroll up main window | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Scroll down main window | |
| `` @ `` | View command log options | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Push | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | Pull | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` <ctrl+p> `` | View custom patch options | |
| `` m `` | View merge/rebase options | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | Refresh | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` <esc> `` | Cancel | |
| `` ? `` | Open keybindings menu | |
| `` <ctrl+s> `` | View filter options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Quit | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` <alt+shift+c> `` | Edit config file | Open file in external editor. |
| `` z `` | Undo | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
## List panel navigation
| Key | Action | Info |
|-----|--------|-------------|
| `` , `` | Previous page | |
| `` . `` | Next page | |
| `` <, <home> `` | Scroll to top | |
| `` >, <end> `` | Scroll to bottom | |
| `` v `` | Toggle range select | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Search the current view by text | |
| `` H `` | Scroll left | |
| `` L `` | Scroll right | |
| `` ] `` | Next tab | |
| `` [ `` | Previous tab | |
## Commit files
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | Copy path to clipboard | |
| `` y `` | Copy to clipboard | |
| `` c `` | Checkout | Checkout file. This replaces the file in your working tree with the version from the selected commit. |
| `` d `` | Discard | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` o `` | Open file | Open file in default application. |
| `` e `` | Edit | Open file in external editor. |
| `` <space> `` | Toggle file included in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Toggle all files | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Enter file / Toggle directory collapsed | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
| `` ` `` | Toggle file tree view | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Reword | Reword the selected commit's message. |
| `` R `` | Reword with editor | |
| `` d `` | Drop | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` e `` | Edit (start interactive rebase) | Edit the selected commit. Use this to start an interactive rebase from the selected commit. When already mid-rebase, this will mark the selected commit for editing, which means that upon continuing the rebase, the rebase will pause at the selected commit to allow you to make changes. |
| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` p `` | Pick | Mark the selected commit to be picked (when mid-rebase). This means that the commit will be retained upon continuing the rebase. |
| `` F `` | Create fixup commit | Create 'fixup!' commit for the selected commit. Later on, you can press `S` on this same commit to apply all above fixup commits. |
| `` S `` | Apply fixup commits | Squash all 'fixup!' commits, either above the selected commit, or all in current branch (autosquash). |
| `` <ctrl+j>, <alt+down> `` | Move commit down one | |
| `` <ctrl+k>, <alt+up> `` | Move commit up one | |
| `` V `` | Paste (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Amend commit with staged changes. If the selected commit is the HEAD commit, this will perform `git commit --amend`. Otherwise the commit will be amended via a rebase. |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <ctrl+l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` w `` | Commit changes without pre-commit hook | |
| `` A `` | Amend last commit | |
| `` C `` | Commit changes using git editor | |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | Open file | Open file in default application. |
| `` i `` | Ignore or exclude file | |
| `` r `` | Refresh files | |
| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
| `` S `` | View stash options | View stash options (e.g. stash all, stash staged, stash unstaged). |
| `` a `` | Stage all | Toggle staged/unstaged for all files in working tree. |
| `` <enter> `` | Stage lines / Collapse directory | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
| `` d `` | Discard | View options for discarding changes to the selected file. |
| `` g `` | View upstream reset options | |
| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | Toggle file tree view | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` c `` | Checkout by name | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | Force checkout | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
| `` d `` | Delete | View delete options for local/remote branch. |
| `` r `` | Rebase | Rebase the checked-out branch onto the selected branch. |
| `` M `` | Merge | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` f `` | Fast-forward | Fast-forward selected branch from its upstream. |
| `` T `` | New tag | |
| `` s `` | Sort order | |
| `` g `` | Reset | |
| `` R `` | Rename branch | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` <tab> `` | Switch view | Switch to other view (staged/unstaged changes). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | Search the current view by text | |
## Main panel (patch building)
| Key | Action | Info |
|-----|--------|-------------|
| `` <left>, h `` | Go to previous hunk | |
| `` <right>, l `` | Go to next hunk | |
| `` v `` | Toggle range select | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` o `` | Open file | Open file in default application. |
| `` e `` | Edit file | Open file in external editor. |
| `` <space> `` | Toggle lines in patch | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Exit custom patch builder | |
| `` / `` | Search the current view by text | |
## Main panel (staging)
| Key | Action | Info |
|-----|--------|-------------|
| `` <left>, h `` | Go to previous hunk | |
| `` <right>, l `` | Go to next hunk | |
| `` v `` | Toggle range select | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` d `` | Discard | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | Open file | Open file in default application. |
| `` e `` | Edit file | Open file in external editor. |
| `` <esc> `` | Return to files panel | |
| `` <tab> `` | Switch view | Switch to other view (staged/unstaged changes). |
| `` E `` | Edit hunk | Edit selected hunk in external editor. |
| `` c `` | Commit | Commit staged changes. |
| `` w `` | Commit changes without pre-commit hook | |
| `` C `` | Commit changes using git editor | |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` d `` | Remove | Remove the selected remote. Any local branches tracking a remote branch from the remote will be unaffected. |
| `` e `` | Edit | Edit the selected remote's name or URL. |
| `` f `` | Fetch | Fetch updates from the remote repository. This retrieves new commits and branches without merging them into your local branches. |
| `` F `` | Add fork remote | Quickly add a fork remote by replacing the owner in the origin URL and optionally check out a branch from new remote. |
| `` / `` | Filter the current view by text | |
## Secondary
| Key | Action | Info |
|-----|--------|-------------|
| `` <tab> `` | Switch view | Switch to other view (staged/unstaged changes). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | Search the current view by text | |
## Stash
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | Apply | Apply the stash entry to your working directory. |
| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Drop | Remove the stash entry from the stash list. |
| `` n `` | New branch | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` w `` | New worktree | |
| `` r `` | Rename stash | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | View files | |
| `` / `` | Filter the current view by text | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` e `` | Edit config file | Open file in external editor. |
| `` u `` | Check for update | |
| `` <enter> `` | Switch to a recent repo | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <ctrl+o> `` | Copy submodule name to clipboard | |
| `` <enter> `` | Enter | Enter submodule. After entering the submodule, you can press `<esc>` to escape back to the parent repo. |
| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
| `` u `` | Update | Update selected submodule. |
| `` n `` | New submodule | |
| `` e `` | Update submodule URL | |
| `` i `` | Initialize | Initialize the selected submodule to prepare for fetching. You probably want to follow this up by invoking the 'update' action to fetch the submodule. |
| `` b `` | View bulk submodule options | |
| `` / `` | Filter the current view by text | |
## Tags
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | Copy tag to clipboard | |
| `` <space> `` | Checkout | Checkout the selected tag as a detached HEAD. |
| `` n `` | New tag | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
| `` w `` | New worktree | |
| `` d `` | Delete | View delete options for local/remote tag. |
| `` P `` | Push tag | Push the selected tag to a remote. You'll be prompted to select a remote. |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` <space> `` | Switch | Switch to the selected worktree. |
| `` o `` | Open in editor | |
| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
| `` P `` | プッシュ | 現在のブランチを対応するアップストリームブランチにプッシュします。アップストリームが設定されていない場合、アップストリームブランチの設定を求められます。 |
| `` p `` | プル | 現在のブランチのリモートから変更をプルします。アップストリームが設定されていない場合、アップストリームブランチの設定を求められます。 |
| `` ) `` | リネーム検出の類似度しきい値を上げる | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | リネーム検出の類似度しきい値を下げる | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | 差分コンテキストサイズを増やす | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | 差分コンテキストサイズを減らす | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` <ctrl+w> `` | 空白表示の切り替え | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` s `` | スカッシュ | 選択したコミットをその下のコミットにスカッシュします。スカッシュとは複数のコミットを1つにまとめる操作です。選択したコミットのメッセージが下のコミットに追加されます。 |
| `` f `` | フィックスアップ | 選択したコミットをその下のコミットにマージします。フィックスアップはスカッシュと似ていますが、選択したコミットのメッセージは破棄され、下のコミットのメッセージのみが保持されます。 |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | メッセージ変更 | 選択したコミットのメッセージを変更します。 |
| `` R `` | エディタでメッセージ変更 | |
| `` d `` | 削除 | 選択したコミットを削除します。これはリベースを通じてブランチからコミットを削除します。コミットが後続のコミットが依存する変更を行っている場合、マージコンフリクトを解決する必要があるかもしれません。 |
| `` e `` | 編集（対話型リベースを開始） | 選択したコミットを編集します。これを使用して、選択したコミットから対話型リベースを開始します。すでにリベース中の場合、これは選択したコミットを編集用にマークし、リベースを続行すると、リベースは選択したコミットで一時停止して変更を行えるようにします。 |
| `` y `` | コミット属性をクリップボードにコピー | コミット属性をクリップボードにコピーします（例：ハッシュ、URL、差分、メッセージ、作者）。 |
| `` o `` | ブラウザでコミットを開く | |
| `` n `` | コミットから新しいブランチを作成 | |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` y `` | コミット属性をクリップボードにコピー | コミット属性をクリップボードにコピーします（例：ハッシュ、URL、差分、メッセージ、作者）。 |
| `` o `` | ブラウザでコミットを開く | |
| `` n `` | コミットから新しいブランチを作成 | |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` a `` | ハンクの選択を切り替える | Toggle line-by-line vs. hunk selection mode. |
| `` <ctrl+o> `` | 選択したテキストをクリップボードにコピー | |
| `` o `` | ファイルを開く | デフォルトのアプリケーションでファイルを開きます。 |
| `` e `` | ファイルを編集 | 外部エディタでファイルを開きます。 |
| `` <space> `` | パッチ内の行を切り替え | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | カスタムパッチビルダーを終了 | |
| `` / `` | 現在のビューをテキストで検索 | |
## メインパネル（マージ中）
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | ハンクを選択 | |
| `` b `` | Pick both hunks | |
| `` <up>, k `` | 前のハンク | |
| `` <down>, j `` | 次のハンク | |
| `` <left>, h `` | 前のコンフリクト | |
| `` <right>, l `` | 次のコンフリクト | |
| `` z `` | 元に戻す | 最後のマージコンフリクト解決を元に戻します。 |
| `` e `` | ファイルを編集 | 外部エディタでファイルを開きます。 |
| `` o `` | ファイルを開く | デフォルトのアプリケーションでファイルを開きます。 |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` y `` | コミット属性をクリップボードにコピー | コミット属性をクリップボードにコピーします（例：ハッシュ、URL、差分、メッセージ、作者）。 |
| `` o `` | ブラウザでコミットを開く | |
| `` n `` | コミットから新しいブランチを作成 | |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | 新しいワークツリー | |
| `` o `` | プルリクエストを作成 | |
| `` O `` | プルリクエスト作成オプションを表示 | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | プルリクエストURLをクリップボードにコピー | |
| `` c `` | 名前でチェックアウト | 名前でチェックアウトします。入力ボックスに「-」を入力すると、最後のブランチをチェックアウトすることができます。 |
| `` - `` | 直前のブランチにチェックアウト | |
| `` F `` | 強制チェックアウト | 選択したブランチを強制的にチェックアウトします。これにより、選択したブランチをチェックアウトする前にワーキングディレクトリ内のすべてのローカル変更が破棄されます。 |
| `` d `` | 削除 | ローカル/リモートブランチの削除オプションを表示します。 |
| `` r `` | リベース | チェックアウトしたブランチを選択したブランチ上にリベースします。 |
| `` M `` | マージ | 選択した項目を現在のブランチにマージするためのオプションを表示します（通常のマージ、スカッシュマージ） |
| `` f `` | ブランチを最新化（fast-forward） | 選択したブランチを対応するアップストリームの最新状態に追いつかせます（fast-forward）。 |
| `` T `` | 新しいタグを作成 | |
| `` s `` | 並び順 | |
| `` g `` | リセット | |
| `` R `` | ブランチ名を変更 | |
| `` u `` | アップストリームオプションを表示 | ブランチのアップストリームに関連するオプションを表示します（例：アップストリームの設定/解除やアップストリームへのリセット）。 |
| `` @ `` | 명령어 로그 메뉴 열기 | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | 푸시 | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | 업데이트 | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Diff 보기의 변경 사항 주위에 표시되는 컨텍스트의 크기를 늘리기 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Diff 보기의 변경 사항 주위에 표시되는 컨텍스트 크기 줄이기 | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` <ctrl+p> `` | 커스텀 Patch 옵션 보기 | |
| `` m `` | View merge/rebase options | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | 새로고침 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | 다음 스크린 모드 (normal/half/fullscreen) | |
| `` _ `` | 이전 스크린 모드 | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` <esc> `` | 취소 | |
| `` ? `` | 매뉴 열기 | |
| `` <ctrl+s> `` | View filter-by-path options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Diff 메뉴 열기 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | 종료 | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | 공백문자를 Diff 뷰에서 표시 여부 전환 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` <alt+shift+c> `` | 설정 파일 수정 | Open file in external editor. |
| `` z `` | 되돌리기 (reflog) (실험적) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | 다시 실행 (reflog) (실험적) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 브라우저에서 커밋 열기 | |
| `` n `` | 커밋에서 새 브랜치를 만듭니다. | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <tab> `` | 패널 전환 | Switch to other view (staged/unstaged changes). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | 검색 시작 | |
## Stash
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | 적용 | Apply the stash entry to your working directory. |
| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Drop | Remove the stash entry from the stash list. |
| `` n `` | 새 브랜치 생성 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 브라우저에서 커밋 열기 | |
| `` n `` | 커밋에서 새 브랜치를 만듭니다. | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <space> `` | Switch | Switch to the selected worktree. |
| `` o `` | Open in editor | |
| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
| `` / `` | Filter the current view by text | |
## 메뉴
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | 실행 | |
| `` <esc> `` | 닫기/취소 | |
| `` / `` | Filter the current view by text | |
## 메인 패널 (Merging)
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | Pick hunk | |
| `` b `` | Pick both hunks | |
| `` <up>, k `` | 이전 hunk를 선택 | |
| `` <down>, j `` | 다음 hunk를 선택 | |
| `` <left>, h `` | 이전 충돌을 선택 | |
| `` <right>, l `` | 다음 충돌을 선택 | |
| `` z `` | 되돌리기 | Undo last merge conflict resolution. |
| `` e `` | 파일 편집 | Open file in external editor. |
| `` o `` | 파일 닫기 | Open file in default application. |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` <esc> `` | 파일 목록으로 돌아가기 | |
## 메인 패널 (Normal)
| Key | Action | Info |
|-----|--------|-------------|
| `` <mouse wheel down> (fn+up) `` | 아래로 스크롤 | |
| `` <mouse wheel up> (fn+down) `` | 위로 스크롤 | |
| `` <tab> `` | 패널 전환 | Switch to other view (staged/unstaged changes). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | 검색 시작 | |
## 메인 패널 (Patch Building)
| Key | Action | Info |
|-----|--------|-------------|
| `` <left>, h `` | 이전 hunk를 선택 | |
| `` <right>, l `` | 다음 hunk를 선택 | |
| `` v `` | 드래그 선택 전환 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <ctrl+o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` o `` | 파일 닫기 | Open file in default application. |
| `` e `` | 파일 편집 | Open file in external editor. |
| `` <space> `` | Line(s)을 패치에 추가/삭제 | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Exit custom patch builder | |
| `` / `` | 검색 시작 | |
## 메인 패널 (Staging)
| Key | Action | Info |
|-----|--------|-------------|
| `` <left>, h `` | 이전 hunk를 선택 | |
| `` <right>, l `` | 다음 hunk를 선택 | |
| `` v `` | 드래그 선택 전환 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <ctrl+o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` <space> `` | Staged 전환 | 선택한 행을 staged / unstaged |
| `` d `` | 변경을 삭제 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | 파일 닫기 | Open file in default application. |
| `` e `` | 파일 편집 | Open file in external editor. |
| `` <esc> `` | 파일 목록으로 돌아가기 | |
| `` <tab> `` | 패널 전환 | Switch to other view (staged/unstaged changes). |
| `` E `` | Edit hunk | Edit selected hunk in external editor. |
| `` c `` | 커밋 변경내용 | 스테이징된 변경 사항 커밋. |
| `` w `` | Commit changes without pre-commit hook | |
| `` C `` | Git 편집기를 사용하여 변경 내용을 커밋합니다. | |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` o `` | 풀 리퀘스트 생성 | |
| `` O `` | 풀 리퀘스트 생성 옵션 | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | 풀 리퀘스트 URL을 클립보드에 복사 | |
| `` c `` | 이름으로 체크아웃 | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | 강제 체크아웃 | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
| `` d `` | 삭제 | View delete options for local/remote branch. |
| `` r `` | 체크아웃된 브랜치를 이 브랜치에 리베이스 | Rebase the checked-out branch onto the selected branch. |
| `` M `` | 현재 브랜치에 병합 | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` f `` | Fast-forward this branch from its upstream | Fast-forward selected branch from its upstream. |
| `` T `` | 태그를 생성 | |
| `` s `` | Sort order | |
| `` g `` | View reset options | |
| `` R `` | 브랜치 이름 변경 | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` s `` | 스쿼시 | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | 커밋메시지 변경 | Reword the selected commit's message. |
| `` R `` | 에디터에서 커밋메시지 수정 | |
| `` d `` | 커밋 삭제 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` e `` | Edit (start interactive rebase) | 커밋을 편집 |
| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` F `` | Create fixup commit | Create fixup commit for this commit |
| `` S `` | Apply fixup commits | Squash all 'fixup!' commits above selected commit (autosquash) |
| `` <ctrl+j>, <alt+down> `` | 커밋을 1개 아래로 이동 | |
| `` <ctrl+k>, <alt+up> `` | 커밋을 1개 위로 이동 | |
| `` V `` | 커밋을 붙여넣기 (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Amend commit with staged changes |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <ctrl+l> `` | 로그 메뉴 열기 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 브라우저에서 커밋 열기 | |
| `` n `` | 커밋에서 새 브랜치를 만듭니다. | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <space> `` | Toggle file included in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Toggle all files included in patch | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Enter file to add selectedlines to the patch (or toggle directory collapsed) | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
| `` ` `` | 파일 트리뷰로 전환 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Filter the current view by text | |
## 커밋메시지
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | 확인 | |
| `` <esc> `` | 닫기 | |
## 태그
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | Copy tag to clipboard | |
| `` <space> `` | 체크아웃 | Checkout the selected tag as a detached HEAD. |
| `` n `` | 태그를 생성 | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
| `` w `` | New worktree | |
| `` d `` | 삭제 | View delete options for local/remote tag. |
| `` P `` | 태그를 push | Push the selected tag to a remote. You'll be prompted to select a remote. |
| `` g `` | 초기화 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` <space> `` | Staged 전환 | Toggle staged for selected file. |
| `` <ctrl+b> `` | 파일을 필터하기 (Staged/unstaged) | |
| `` y `` | 클립보드에 복사 | |
| `` c `` | 커밋 변경내용 | 스테이징된 변경 사항 커밋. |
| `` w `` | Commit changes without pre-commit hook | |
| `` A `` | 마지맛 커밋 수정 | |
| `` C `` | Git 편집기를 사용하여 변경 내용을 커밋합니다. | |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | 파일 닫기 | Open file in default application. |
| `` i `` | Ignore file | |
| `` r `` | 파일 새로고침 | |
| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
| `` S `` | Stash 옵션 보기 | View stash options (e.g. stash all, stash staged, stash unstaged). |
| `` a `` | 모든 변경을 Staged/unstaged으로 전환 | Toggle staged/unstaged for all files in working tree. |
| `` <enter> `` | Stage individual hunks/lines for file, or collapse/expand for directory | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
| `` d `` | View 'discard changes' options | View options for discarding changes to the selected file. |
| `` g `` | View upstream reset options | |
| `` D `` | 초기화 | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | 파일 트리뷰로 전환 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
# Lazygit Sneltoetsen
## Globale sneltoetsen
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+r> `` | Wissel naar een recente repo | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` @ `` | View command log options | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Push | Push de huidige branch naar de bijbehorende upstream-branch. Als er geen upstream is geconfigureerd wordt er gevraagd om een upstream-branch te configureren. |
| `` p `` | Pull | Pull wijzigingen van de remote voor de huidige branch. Als er geen upstream is geconfigureerd wordt er gevraagd om een upstream-branch te configureren. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Bekijk merge/rebase opties | Toon abort/continue/skip opties voor huidige merge/rebase. |
| `` R `` | Verversen | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | Volgende scherm modus (normaal/half/groot) | |
| `` _ `` | Vorige scherm modus | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` <esc> `` | Annuleren | |
| `` ? `` | Open menu | |
| `` <ctrl+s> `` | Bekijk scoping opties | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Afsluiten | |
| `` <ctrl+z> `` | Pauzeer de applicatie | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` <alt+shift+c> `` | Verander config bestand | Open bestand in externe editor. |
| `` z `` | Ongedaan maken (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
## Lijstpaneel navigatie
| Key | Action | Info |
|-----|--------|-------------|
| `` , `` | Vorige pagina | |
| `` . `` | Volgende pagina | |
| `` <, <home> `` | Scroll naar boven | |
| `` >, <end> `` | Scroll naar beneden | |
| `` v `` | Toggle drag selecteer | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Start met zoeken | |
| `` H `` | Scroll naar links | |
| `` L `` | Scroll naar rechts | |
| `` ] `` | Volgende tabblad | |
| `` [ `` | Vorige tabblad | |
## Bestanden
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | Kopieer de bestandsnaam naar het klembord | |
| `` w `` | Commit veranderingen zonder pre-commit hook | |
| `` A `` | Wijzig laatste commit | |
| `` C `` | Commit veranderingen met de git editor | |
| `` <ctrl+f> `` | Find base commit for fixup | Vind de commit waar je huidige wijzigingen bovenop zijn gebouwd met als doel die commit te amenden/fixen. Hierdoor hoef je dit niet met de hand te doen. Zie: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open bestand in externe editor. |
| `` o `` | Open bestand | Open bestand in standaardapplicatie. |
| `` i `` | Ignore or exclude file | |
| `` r `` | Refresh bestanden | |
| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
| `` S `` | Bekijk stash opties | View stash options (e.g. stash all, stash staged, stash unstaged). |
| `` a `` | Toggle staged alle | Toggle staged/unstaged for all files in working tree. |
| `` <enter> `` | Stage individuele hunks/lijnen | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
| `` d `` | Bekijk 'veranderingen ongedaan maken' opties | View options for discarding changes to the selected file. |
| `` g `` | Bekijk upstream reset opties | |
| `` D `` | Resetten | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | Toggle bestandsboom weergave | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` o `` | Maak een pull-request | |
| `` O `` | Bekijk opties voor pull-aanvraag | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | Kopieer de URL van het pull-verzoek naar het klembord | |
| `` c `` | Uitchecken bij naam | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Vorige branch uitchecken | |
| `` F `` | Forceer checkout | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
| `` d `` | Verwijderen | View delete options for local/remote branch. |
| `` r `` | Rebase branch | Rebase de uitgecheckte branch bovenop de geselecteerde branch. |
| `` M `` | Merge in met huidige checked out branch | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` f `` | Fast-forward deze branch vanaf zijn upstream | Fast-forward selected branch from its upstream. |
| `` T `` | Creëer tag | |
| `` s `` | Sort order | |
| `` g `` | Bekijk reset opties | |
| `` R `` | Hernoem branch | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` <space> `` | Toggle bestand inbegrepen in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Toggle all files | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Enter bestand om geselecteerde regels toe te voegen aan de patch | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
| `` ` `` | Toggle bestandsboom weergave | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Vouw alle bestanden uit | Vouw alle mappen in de bestandsstructuur uit |
| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Hernoem commit | Reword the selected commit's message. |
| `` R `` | Hernoem commit met editor | |
| `` d `` | Verwijder commit | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` p `` | Pick | Kies commit (wanneer midden in rebase) |
| `` <ctrl+k>, <alt+up> `` | Verplaats commit 1 naar boven | |
| `` V `` | Plak commits (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Wijzig commit met staged veranderingen |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <ctrl+l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <ctrl+o> `` | Kopieer branch name naar klembord | |
| `` <space> `` | Uitchecken | Geselecteerde remote branch uitchecken als nieuwe locale branch of als detached head. |
| `` n `` | Nieuwe branch | |
| `` w `` | New worktree | |
| `` M `` | Merge in met huidige checked out branch | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` r `` | Rebase branch | Rebase de uitgecheckte branch bovenop de geselecteerde branch. |
| `` d `` | Verwijderen | Delete the remote branch from the remote. |
| `` u `` | Instellen als upstream | Stel in als upstream van uitgecheckte branch |
| `` s `` | Sort order | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` d `` | Verwijdert change (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | Open bestand | Open bestand in standaardapplicatie. |
| `` e `` | Verander bestand | Open bestand in externe editor. |
| `` <esc> `` | Ga terug naar het bestanden paneel | |
| `` <tab> `` | Ga naar een ander paneel | Switch to other view (staged/unstaged changes). |
| `` E `` | Edit hunk | Edit selected hunk in external editor. |
| `` w `` | Commit veranderingen zonder pre-commit hook | |
| `` C `` | Commit veranderingen met de git editor | |
| `` <ctrl+f> `` | Find base commit for fixup | Vind de commit waar je huidige wijzigingen bovenop zijn gebouwd met als doel die commit te amenden/fixen. Hierdoor hoef je dit niet met de hand te doen. Zie: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Start met zoeken | |
## Stash
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | Toepassen | Apply the stash entry to your working directory. |
| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Laten vallen | Remove the stash entry from the stash list. |
| `` n `` | Nieuwe branch | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` w `` | New worktree | |
| `` r `` | Hernoem stash | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | Bekijk gecommite bestanden | |
| `` / `` | Filter the current view by text | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` e `` | Verander config bestand | Open bestand in externe editor. |
| `` u `` | Check voor updates | |
| `` <enter> `` | Wissel naar een recente repo | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <space> `` | Switch | Switch to the selected worktree. |
| `` o `` | Openen in editor | |
| `` d `` | Verwijderen | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
# Lazygit Skróty klawiszowe
## Globalne skróty klawiszowe
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+r> `` | Przełącz na ostatnie repozytorium | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Przewiń główne okno w górę | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Przewiń główne okno w dół | |
| `` @ `` | Pokaż opcje dziennika poleceń | Pokaż opcje dla dziennika poleceń, np. pokazywanie/ukrywanie dziennika poleceń i skupienie na dzienniku poleceń. |
| `` P `` | Wypchnij | Wypchnij bieżącą gałąź do jej gałęzi nadrzędnej. Jeśli nie skonfigurowano gałęzi nadrzędnej, zostaniesz poproszony o skonfigurowanie gałęzi nadrzędnej. |
| `` p `` | Pociągnij | Pociągnij zmiany ze zdalnego dla bieżącej gałęzi. Jeśli nie skonfigurowano gałęzi nadrzędnej, zostaniesz poproszony o skonfigurowanie gałęzi nadrzędnej. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Zwiększ rozmiar kontekstu w widoku różnic | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Zmniejsz rozmiar kontekstu w widoku różnic | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Wykonaj polecenie w powłoce | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Pokaż opcje scalania/rebase | Pokaż opcje do przerwania/kontynuowania/pominięcia bieżącego scalania/rebase. |
| `` R `` | Odśwież | Odśwież stan git (tj. uruchom `git status`, `git branch`, itp. w tle, aby zaktualizować zawartość paneli). To nie uruchamia `git fetch`. |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` <esc> `` | Anuluj | |
| `` ? `` | Otwórz menu przypisań klawiszy | |
| `` <ctrl+s> `` | Pokaż opcje filtrowania | Pokaż opcje filtrowania dziennika commitów, tak aby pokazywane były tylko commity pasujące do filtra. |
| `` W, <ctrl+e> `` | Pokaż opcje różnicowania | Pokaż opcje dotyczące różnicowania dwóch refów, np. różnicowanie względem wybranego refa, wprowadzanie refa do różnicowania i odwracanie kierunku różnic. |
| `` q, <ctrl+c> `` | Wyjdź | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Przełącz białe znaki | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` z `` | Cofnij | Dziennik reflog zostanie użyty do określenia, jakie polecenie git należy uruchomić, aby cofnąć ostatnie polecenie git. Nie obejmuje to zmian w drzewie roboczym; brane są pod uwagę tylko commity. |
| `` Z `` | Ponów | Dziennik reflog zostanie użyty do określenia, jakie polecenie git należy uruchomić, aby ponowić ostatnie polecenie git. Nie obejmuje to zmian w drzewie roboczym; brane są pod uwagę tylko commity. |
## Nawigacja panelu listy
| Key | Action | Info |
|-----|--------|-------------|
| `` , `` | Poprzednia strona | |
| `` . `` | Następna strona | |
| `` <, <home> `` | Przewiń do góry | |
| `` >, <end> `` | Przewiń do dołu | |
| `` v `` | Przełącz zaznaczenie zakresu | |
| `` <shift+down> `` | Zaznacz zakres w dół | |
| `` <shift+up> `` | Zaznacz zakres w górę | |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
| `` s `` | Scal | Scal wybrany commit z commitami poniżej. Wiadomość wybranego commita zostanie dołączona do commita poniżej. |
| `` f `` | Poprawka | Włącz wybrany commit do commita poniżej. Podobnie do fixup, ale wiadomość wybranego commita zostanie odrzucona. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` d `` | Usuń | Usuń wybrany commit. To usunie commit z gałęzi za pomocą przebazowania. Jeśli commit wprowadza zmiany, od których zależą późniejsze commity, być może będziesz musiał rozwiązać konflikty scalania. |
| `` e `` | Edytuj (rozpocznij interaktywne przebazowanie) | Edytuj wybrany commit. Użyj tego, aby rozpocząć interaktywne przebazowanie od wybranego commita. Podczas trwania przebazowania, to oznaczy wybrany commit do edycji, co oznacza, że po kontynuacji przebazowania, przebazowanie zostanie wstrzymane na wybranym commicie, aby umożliwić wprowadzenie zmian. |
| `` i `` | Rozpocznij interaktywne przebazowanie | Rozpocznij interaktywne przebazowanie dla commitów na twojej gałęzi. To będzie zawierać wszystkie commity od HEAD do pierwszego commita scalenia lub commita głównej gałęzi.<br>Jeśli zamiast tego chcesz rozpocząć interaktywne przebazowanie od wybranego commita, naciśnij `e`. |
| `` p `` | Wybierz | Oznacz wybrany commit do wybrania (podczas przebazowania). Oznacza to, że commit zostanie zachowany po kontynuacji przebazowania. |
| `` F `` | Utwórz commit fixup | Utwórz commit 'fixup!' dla wybranego commita. Później możesz nacisnąć `S` na tym samym commicie, aby zastosować wszystkie powyższe commity fixup. |
| `` S `` | Zastosuj commity fixup | Scal wszystkie commity 'fixup!', albo powyżej wybranego commita, albo wszystkie w bieżącej gałęzi (autosquash). |
| `` B `` | Oznacz jako bazowy commit dla przebazowania | Wybierz bazowy commit dla następnego przebazowania. Kiedy robisz przebazowanie na gałąź, tylko commity powyżej bazowego commita zostaną przeniesione. Używa to polecenia `git rebase --onto`. |
| `` A `` | Popraw | Popraw commit ze zmianami zatwierdzonymi. Jeśli wybrany commit jest commit HEAD, to wykona `git commit --amend`. W przeciwnym razie commit zostanie poprawiony za pomocą przebazowania. |
| `` a `` | Popraw atrybut commita | Ustaw/Resetuj autora commita lub ustaw współautora. |
| `` t `` | Cofnij | Utwórz commit cofający dla wybranego commita, który stosuje zmiany wybranego commita w odwrotnej kolejności. |
| `` T `` | Otaguj commit | Utwórz nowy tag wskazujący na wybrany commit. Zostaniesz poproszony o wprowadzenie nazwy tagu i opcjonalnego opisu. |
| `` <ctrl+l> `` | Zobacz opcje logów | Zobacz opcje dla logów commitów, np. zmiana kolejności sortowania, ukrywanie grafu gita, pokazywanie całego grafu gita. |
| `` G `` | Otwórz żądanie ściągnięcia w przeglądarce | |
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
| `` <left>, h `` | Idź do poprzedniego fragmentu | |
| `` <right>, l `` | Idź do następnego fragmentu | |
| `` v `` | Przełącz zaznaczenie zakresu | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <ctrl+o> `` | Kopiuj zaznaczony tekst do schowka | |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
| `` e `` | Edytuj plik | Otwórz plik w zewnętrznym edytorze. |
| `` <space> `` | Przełącz linie w łatce | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` o `` | Utwórz żądanie ściągnięcia | |
| `` O `` | Zobacz opcje tworzenia pull requesta | |
| `` G `` | Otwórz żądanie ściągnięcia w przeglądarce | |
| `` c `` | Przełącz według nazwy | Przełącz według nazwy. W polu wprowadzania możesz wpisać '-' aby przełączyć się na ostatnią gałąź. |
| `` - `` | Przełącz na poprzednią gałąź | |
| `` F `` | Wymuś przełączenie | Wymuś przełączenie wybranej gałęzi. To spowoduje odrzucenie wszystkich lokalnych zmian w drzewie roboczym przed przełączeniem na wybraną gałąź. |
| `` d `` | Odrzuć | Gdy zaznaczona jest niezatwierdzona zmiana, odrzuć ją używając `git reset`. Gdy zaznaczona jest zatwierdzona zmiana, cofnij zatwierdzenie. |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
| `` e `` | Edytuj plik | Otwórz plik w zewnętrznym edytorze. |
| `` <esc> `` | Wróć do panelu plików | |
| `` <tab> `` | Przełącz widok | Przełącz na inny widok (zatwierdzone/niezatwierdzone zmiany). |
| `` E `` | Edytuj fragment | Edytuj wybrany fragment w zewnętrznym edytorze. |
| `` c `` | Commit | Zatwierdź zmiany zatwierdzone. |
| `` w `` | Zatwierdź zmiany bez hooka pre-commit | |
| `` C `` | Zatwierdź zmiany używając edytora git | |
| `` <ctrl+f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
| `` <ctrl+b> `` | Filtruj pliki według statusu | |
| `` y `` | Kopiuj do schowka | |
| `` c `` | Commit | Zatwierdź zmiany zatwierdzone. |
| `` w `` | Zatwierdź zmiany bez hooka pre-commit | |
| `` A `` | Popraw ostatni commit | |
| `` C `` | Zatwierdź zmiany używając edytora git | |
| `` <ctrl+f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edytuj | Otwórz plik w zewnętrznym edytorze. |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
| `` i `` | Ignoruj lub wyklucz plik | |
| `` r `` | Odśwież pliki | |
| `` s `` | Schowaj | Schowaj wszystkie zmiany. Dla innych wariantów schowania, użyj klawisza wyświetlania opcji schowka. |
| `` S `` | Wyświetl opcje schowka | Wyświetl opcje schowka (np. schowaj wszystko, schowaj zatwierdzone, schowaj niezatwierdzone). |
| `` a `` | Zatwierdź wszystko | Przełącz zatwierdzenie/odznaczenie dla wszystkich plików w drzewie roboczym. |
| `` <enter> `` | Zatwierdź linie / Zwiń katalog | Jeśli wybrany element jest plikiem, skup się na widoku zatwierdzania, aby móc zatwierdzać poszczególne fragmenty/linie. Jeśli wybrany element jest katalogiem, zwiń/rozwiń go. |
| `` d `` | Odrzuć | Wyświetl opcje odrzucania zmian w wybranym pliku. |
| `` g `` | Pokaż opcje resetowania do upstream | |
| `` D `` | Reset | Wyświetl opcje resetu dla drzewa roboczego (np. zniszczenie drzewa roboczego). |
| `` ` `` | Przełącz widok drzewa plików | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` f `` | Pobierz | Pobierz zmiany ze zdalnego serwera. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Filtruj bieżący widok po tekście | |
## Pliki commita
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | Kopiuj ścieżkę do schowka | |
| `` y `` | Kopiuj do schowka | |
| `` c `` | Przełącz | Przełącz plik. Zastępuje plik w twoim drzewie roboczym wersją z wybranego commita. |
| `` d `` | Odrzuć | Odrzuć zmiany w tym pliku z tego commita. Uruchamia interaktywne przebazowanie w tle, więc możesz otrzymać konflikt scalania, jeśli późniejszy commit również zmienia ten plik. |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
| `` e `` | Edytuj | Otwórz plik w zewnętrznym edytorze. |
| `` <space> `` | Przełącz plik włączony w łatkę | Przełącz, czy plik jest włączony w niestandardową łatkę. Zobacz https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Przełącz wszystkie pliki | Dodaj/usuń wszystkie pliki commita do niestandardowej łatki. Zobacz https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Wejdź do pliku / Przełącz zwiń katalog | Jeśli plik jest wybrany, wejdź do pliku, aby móc dodawać/usuwać poszczególne linie do niestandardowej łatki. Jeśli wybrany jest katalog, przełącz katalog. |
| `` ` `` | Przełącz widok drzewa plików | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` g `` | Wyciągnij | Zastosuj wpis schowka do katalogu roboczego i usuń wpis schowka. |
| `` d `` | Usuń | Usuń wpis schowka z listy schowka. |
| `` n `` | Nowa gałąź | Utwórz nową gałąź z wybranego wpisu schowka. Działa poprzez przełączenie git na commit, na którym wpis schowka został utworzony, tworzenie nowej gałęzi z tego commita, a następnie zastosowanie wpisu schowka do nowej gałęzi jako dodatkowego commita. |
| `` w `` | Nowe drzewo pracy | |
| `` r `` | Zmień nazwę schowka | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | Wyświetl pliki | |
| `` / `` | Filtruj bieżący widok po tekście | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` e `` | Edytuj plik konfiguracyjny | Otwórz plik w zewnętrznym edytorze. |
| `` u `` | Sprawdź aktualizacje | |
| `` <enter> `` | Przełącz na ostatnie repozytorium | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
## Submoduły
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | Kopiuj nazwę submodułu do schowka | |
| `` <enter> `` | Wejdź | Wejdź do submodułu. Po wejściu do submodułu możesz nacisnąć `<esc>`, aby wrócić do repozytorium nadrzędnego. |
| `` d `` | Usuń | Usuń wybrany submoduł i odpowiadający mu katalog. |
| `` u `` | Aktualizuj | Aktualizuj wybrany submoduł. |
| `` n `` | Nowy submoduł | |
| `` e `` | Zaktualizuj URL submodułu | |
| `` i `` | Zainicjuj | Zainicjuj wybrany submoduł, aby przygotować do pobrania. Prawdopodobnie chcesz to kontynuować, wywołując akcję 'update', aby pobrać submoduł. |
| `` b `` | Pokaż opcje masowych operacji na submodułach | |
| `` / `` | Filtruj bieżący widok po tekście | |
## Tagi
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | Skopiuj tag do schowka | |
| `` <space> `` | Przełącz | Przełącz wybrany tag jako odłączoną głowę (detached HEAD). |
| `` n `` | Nowy tag | Utwórz nowy tag z bieżącego commita. Zostaniesz poproszony o wprowadzenie nazwy tagu i opcjonalnego opisu. |
_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
# Lazygit Atalhos do teclado
## Combinações globais de teclas
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+r> `` | Mudar para um repositório recente | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Rolar janela principal para cima | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Rolar a janela principal para baixo | |
| `` @ `` | View command log options | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Empurre (Push) | Faça push do branch atual para o seu branch upstream. Se nenhum upstream estiver configurado, você será solicitado a configurar um branch a montante. |
| `` p `` | Puxar (Pull) | Puxe alterações do controle remoto para o ramo atual. Se nenhum upstream estiver configurado, será solicitado configurar um ramo a montante. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Executar comando da shell | Traga um prompt onde você pode digitar um comando shell para executar. |
| `` <ctrl+p> `` | Ver opções de patch personalizadas | |
| `` m `` | Ver opções de mesclar/rebase | Ver opções para abortar/continuar/pular o merge/rebase atual. |
| `` R `` | Atualizar | Atualize o estado do git (ou seja, execute `git status`, `git branch`, etc em segundo plano para atualizar o conteúdo de painéis). Isso não executa `git fetch`. |
| `` + `` | Modo de tela seguinte (normal/metade/tela cheia) | |
| `` _ `` | Modo de tela anterior | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` <esc> `` | Cancelar | |
| `` ? `` | Abrir o menu de atalhos do teclado | |
| `` <ctrl+s> `` | Ver opções de filtro | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Sair | |
| `` <ctrl+z> `` | Suspender a aplicação | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` <alt+shift+c> `` | Editar arquivo de configuração | Abrir arquivo no editor externo. |
| `` z `` | Desfazer | O reflog será usado para determinar qual comando git para executar para desfazer o último comando git. Isto não inclui mudanças na árvore de trabalho; apenas compromissos são tidos em consideração. |
| `` Z `` | Refazer | O reflog será usado para determinar qual comando git para executar para refazer o último comando git. Isto não inclui mudanças na árvore de trabalho; apenas compromissos são tidos em consideração. |
## List panel navigation
| Key | Action | Info |
|-----|--------|-------------|
| `` , `` | Aba anterior | |
| `` . `` | Próxima aba | |
| `` <, <home> `` | Voltar ao topo | |
| `` >, <end> `` | Ir para o final | |
| `` v `` | Toggle range select | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Pesquisar na visualização atual por texto | |
| `` H `` | Rolar à esquerda | |
| `` L `` | Scroll para a direita | |
| `` ] `` | Próxima aba | |
| `` [ `` | Aba anterior | |
## Arquivos
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | Copiar caminho para área de transferência | |
| `` <space> `` | Etapa | Alternar para staging para o arquivo selecionado. |
| `` <ctrl+b> `` | Filtrar arquivos por status | |
| `` y `` | Copy to clipboard | |
| `` c `` | Commit | Submeter mudanças em staging |
| `` w `` | Fazer commit de alterações sem pré-commit | |
| `` A `` | Alterar último commit | |
| `` C `` | Enviar alteração usando um editor Git | |
| `` <ctrl+f> `` | Encontrar commit da base para corrigir | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Editar | Abrir arquivo no editor externo. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` i `` | Ignore or exclude file | |
| `` r `` | Atualizar arquivos | |
| `` s `` | Stash | Stash todas as alterações. Para outras variações de armazenamento, use a fixação de teclas de armazenamento. |
| `` S `` | Ver opções de stash | Ver opções de stash (por exemplo, trash all, stash staged, stash unsttued). |
| `` a `` | Stage completo | Alternar para todos os arquivos na árvore de trabalho |
| `` <enter> `` | Stage lines / Colapso diretório | Se o item selecionado for um arquivo, o foco na exibição de preparo para o estágio de cenas/linhas individuais. Se o item selecionado for um diretório, recolher/expandi-lo. |
| `` d `` | Descartar | Exibir opções para descartar alterações para o arquivo selecionado. |
| `` g `` | View upstream reset options | |
| `` D `` | Restaurar | Opções de redefinição de exibição para árvore de trabalho (por exemplo, nukando a árvore de trabalho). |
| `` ` `` | Alternar exibição de árvore de arquivo | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` o `` | Criar solicitação de pull | |
| `` O `` | View create pull request options | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | Copiar URL do pull request para área de transferência | |
| `` c `` | Checar por nome | Checar por nome. Na caixa de entrada você pode inserir '-' para trocar para a última branch |
| `` - `` | Checkout da branch anterior | |
| `` F `` | Forçar checagem | Forçar checagem da branch selecionada. Isso irá descartar todas as mudanças no seu diretório de trabalho antes cheque a branch selecionada |
| `` d `` | Apagar | Ver opções de exclusão para a branch local/remoto. |
| `` r `` | Refazer | Refazer a branch checada na branch selecionada |
| `` M `` | Mesclar | Ver opções para mesclar o item selecionado no branch atual (mesclar regularmente, mesclar squash) |
| `` f `` | Avanço rápido | Encaminhamento rápido de branch selecionada a partir do upstream. |
| `` T `` | Nova etiqueta | |
| `` s `` | Sort order | |
| `` g `` | Restaurar | |
| `` R `` | Renomear branch | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` / `` | Filtrar a visualização atual por texto | |
## Commit arquivos
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | Copiar caminho para área de transferência | |
| `` y `` | Copy to clipboard | |
| `` c `` | Verificar | Arquivo de check-out. Isso substitui o arquivo em sua árvore de trabalho com a versão do commit selecionado. |
| `` d `` | Descartar | Descartar as alterações desse commit para este arquivo. Isso executa uma rebase interativa em segundo plano, então você pode ter um conflito de merge se um commit posterior também alterar este arquivo. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` e `` | Editar | Abrir arquivo no editor externo. |
| `` <space> `` | Alternar entre o arquivo incluído no patch | Alternar se o arquivo está incluído no patch personalizado. Veja https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Alternar todos os arquivos | Adicionar/remover todos os arquivos de commit para atualização personalizada. Consulte https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Insira o arquivo / Alternar diretório recolhido | Se um arquivo estiver selecionado, insira o arquivo para que você possa adicionar/remover linhas individuais no patch personalizado. Se um diretório for selecionado, ative o diretório. |
| `` ` `` | Alternar exibição de árvore de arquivo | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Recolher todos os arquivos | Recolher todos os diretórios na árvore de arquivos |
| `` = `` | Expandir todos os arquivos | Expandir todos os diretórios na árvore do arquivo |
| `` 0 `` | Focar visualização principal | |
| `` / `` | Filtrar a visualização atual por texto | |
| `` s `` | Squash | Squash o commit selecionado no commit abaixo dele. A mensagem do commit selecionado será anexada ao commit abaixo dele. |
| `` f `` | Corrigir | Faça o commit selecionado no commit abaixo dele. Semelhante para o squash, mas a mensagem do commit selecionado será descartada. |
| `` c `` | Configurar mensagem de correção | Defina a opção de mensagem para o commit de correção. A opção -C significa usar a mensagem deste commit em vez da mensagem do commit alvo. |
| `` r `` | Reword | Repetir a mensagem de submissão selecionada. |
| `` R `` | Republicar com o editor | |
| `` d `` | Descartar | Solte o commit selecionado. Isso irá remover o commit do branch através de uma rebase. Se o commit faz com que as alterações em commits posteriores dependem, você pode precisar resolver conflitos de merge. |
| `` e `` | Editar (iniciar rebase interativa) | Editar o commit selecionado. Use isto para iniciar uma rebase interativa a partir do commit selecionado. Quando já estiver no meio da reconstrução, isto irá marcar o commit selecionado para edição, o que significa que ao continuar com a reformulação. a rebase irá pausar no commit selecionado para permitir que você faça alterações. |
| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` p `` | Escolher | Marque o commit selecionado para ser escolhido (quando meados da base). Isso significa que o commit será mantido ao continuar o rebase. |
| `` F `` | Criar commit de correção | Crie o commit 'correção!' para o commit selecionado. Mais tarde, você pode pressionar `S` neste mesmo commit para aplicar todas os commits de correção acima. |
| `` S `` | Aplicar commits de correções | Aplicar Squash all 'correção!', seja acima do commit selecionado, ou tudo no branch atual (autosquash). |
| `` <ctrl+j>, <alt+down> `` | Mover commit um para baixo | |
| `` <ctrl+k>, <alt+up> `` | Mover o commit um para cima | |
| `` V `` | Colar (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Modificar | Alterar o commit com mudanças em sted. Se o commit selecionado for o commit HEAD, ele executará o `git commit --amend`. Caso contrário, o compromisso será alterado por meio de uma base de apoio. |
| `` a `` | Alterar atributo de commit | Definir/Redefinir autor de submissão ou co-autor definido. |
| `` t `` | Reverter | Crie um commit reverter para o commit selecionado, que aplica as alterações do commit selecionado em reverso. |
| `` T `` | Etiquetar commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <ctrl+l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Verificar | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Abrir commit no navegador | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` g `` | Restaurar | Ver opções de redefinição (soft/mixed/hard) para redefinir para o item selecionado. |
| `` C `` | Copiar (cherry-pick) | Marcar commit como copiado. Então, dentro da visualização local de commits, você pode pressionar `V` para colar (cherry-pick) o(s) commit(s) copiado(s) em seu branch de check-out. A qualquer momento você pode pressionar `<esc>` para cancelar a seleção. |
| `` d `` | Descartar | Quando a mudança não desejada for selecionada, descarte a mudança usando `git reset`. Quando a mudança em fase é selecionada, despare a mudança. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` e `` | Editar arquivo | Abrir arquivo no editor externo. |
| `` <esc> `` | Retornar ao painel de arquivos | |
| `` <tab> `` | Mudar de visão | Alternar para outra visão (staged/não processadas alterações). |
| `` E `` | Editar hunk | Editar o local selecionado no editor externo. |
| `` c `` | Commit | Submeter mudanças em staging |
| `` w `` | Fazer commit de alterações sem pré-commit | |
| `` C `` | Enviar alteração usando um editor Git | |
| `` <ctrl+f> `` | Encontrar commit da base para corrigir | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Pesquisar na visualização atual por texto | |
## Painel de confirmação
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | Confirmar | |
| `` <esc> `` | Fechar/Cancelar | |
| `` <ctrl+o> `` | Copy to clipboard | |
## Painel principal (mesclagem)
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | Escolha o local | |
| `` b `` | Pick both hunks | |
| `` <up>, k `` | Trecho anterior | |
| `` <down>, j `` | Próximo trecho | |
| `` <left>, h `` | Conflito anterior | |
| `` <right>, l `` | Próximo conflito | |
| `` z `` | Desfazer | Desfazer resolução de conflitos de última mesclagem. |
| `` e `` | Editar arquivo | Abrir arquivo no editor externo. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` <esc> `` | Retornar ao painel de arquivos | |
## Painel principal (patch build)
| Key | Action | Info |
|-----|--------|-------------|
| `` <left>, h `` | Ir para o local anterior | |
| `` <right>, l `` | Ir para o próximo trecho | |
| `` v `` | Toggle range select | |
| `` a `` | Toggle hunk selection | Ativa/desativa modo linha por linha vs. modo de seleção por partes. |
| `` <ctrl+o> `` | Copiar texto selecionado para área de transferência | |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` e `` | Editar arquivo | Abrir arquivo no editor externo. |
| `` <space> `` | Alternar linhas no caminho | |
| `` d `` | Remover linhas do commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Sair do construtor de patch personalizado | |
| `` / `` | Pesquisar na visualização atual por texto | |
| `` <space> `` | Verificar | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Abrir commit no navegador | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` g `` | Restaurar | Ver opções de redefinição (soft/mixed/hard) para redefinir para o item selecionado. |
| `` C `` | Copiar (cherry-pick) | Marcar commit como copiado. Então, dentro da visualização local de commits, você pode pressionar `V` para colar (cherry-pick) o(s) commit(s) copiado(s) em seu branch de check-out. A qualquer momento você pode pressionar `<esc>` para cancelar a seleção. |
| `` / `` | Filtrar a visualização atual por texto | |
## Remotes
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | Ver branches | |
| `` n `` | Novo controle | |
| `` d `` | Remover | Remover o controle remoto. Quaisquer ramificações locais de rastreamento de um ramo remoto do controle não serão afetadas. |
| `` e `` | Editar | Edit the selected remote's name or URL. |
| `` f `` | Buscar | Fetch updates from the remote repository. This retrieves new commits and branches without merging them into your local branches. |
| `` F `` | Add fork remote | Quickly add a fork remote by replacing the owner in the origin URL and optionally check out a branch from new remote. |
| `` / `` | Filtrar a visualização atual por texto | |
## Secundário
| Key | Action | Info |
|-----|--------|-------------|
| `` <tab> `` | Mudar de visão | Alternar para outra visão (staged/não processadas alterações). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | Pesquisar na visualização atual por texto | |
## Stash
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | Aplicar | Aplique o stash no seu diretório de trabalho. |
| `` g `` | Pop | Aplique a entrada de stash no seu diretório de trabalho e remova a entrada de stash. |
| `` d `` | Descartar | Remova a entrada do stash da lista de armazenamento. |
| `` n `` | Nova branch | Criar um novo ramo a partir da entrada de lixo selecionada. Isso funciona verificando o commit do qual a entrada de lixo foi criada, criar um novo branch a partir desse commit e, em seguida, aplicar a entrada de lixo ao novo branch como um commit adicional. |
| `` w `` | Nova árvore de trabalho | |
| `` r `` | Renomear o stash | |
| `` 0 `` | Focar visualização principal | |
| `` <enter> `` | Ver arquivos | |
| `` / `` | Filtrar a visualização atual por texto | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` e `` | Editar arquivo de configuração | Abrir arquivo no editor externo. |
| `` u `` | Verificar atualização | |
| `` <enter> `` | Mudar para um repositório recente | |
| `` a `` | Mostrar/ciclo todos os logs de filiais | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Verificar | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Abrir commit no navegador | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` g `` | Restaurar | Ver opções de redefinição (soft/mixed/hard) para redefinir para o item selecionado. |
| `` C `` | Copiar (cherry-pick) | Marcar commit como copiado. Então, dentro da visualização local de commits, você pode pressionar `V` para colar (cherry-pick) o(s) commit(s) copiado(s) em seu branch de check-out. A qualquer momento você pode pressionar `<esc>` para cancelar a seleção. |
| `` i `` | Inicializar | Initialize the selected submodule to prepare for fetching. You probably want to follow this up by invoking the 'update' action to fetch the submodule. |
| `` b `` | View bulk submodule options | |
| `` / `` | Filtrar a visualização atual por texto | |
## Sumário do commit
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | Confirmar | |
| `` <esc> `` | Fechar | |
## Árvores de trabalho
| Key | Action | Info |
|-----|--------|-------------|
| `` n `` | Nova árvore de trabalho | |
| `` <space> `` | Switch | Mudar para a árvore de trabalho selecionada. |
| `` o `` | Abrir no editor | |
| `` d `` | Remover | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
| `` / `` | Filtrar a visualização atual por texto | |
| `` @ `` | Открыть меню журнала команд | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Отправить изменения | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | Получить и слить изменения | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Увеличить размер контекста, отображаемого вокруг изменений в просмотрщике сравнении | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Уменьшите размер контекста, отображаемого вокруг изменений в просмотрщике сравнении | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Просмотреть параметры слияния/перебазирования | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | Обновить | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | Следующий режим экрана (нормальный/полуэкранный/полноэкранный) | |
| `` _ `` | Предыдущий режим экрана | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` <esc> `` | Отменить | |
| `` ? `` | Открыть меню | |
| `` <ctrl+s> `` | Просмотреть параметры фильтрации по пути | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Открыть меню сравнении | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Выйти | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Переключить отображение изменении пробелов в просмотрщике сравнении | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` <alt+shift+c> `` | Редактировать файл конфигурации | Open file in external editor. |
| `` z `` | Отменить (через reflog) (экспериментальный) | Журнал ссылок (reflog) будет использоваться для определения того, какую команду git запустить, чтобы отменить последнюю команду git. Сюда не входят изменения в рабочем дереве; учитываются только коммиты. |
| `` Z `` | Повторить (через reflog) (экспериментальный) | Журнал ссылок (reflog) будет использоваться для определения того, какую команду git нужно запустить, чтобы повторить последнюю команду git. Сюда не входят изменения в рабочем дереве; учитываются только коммиты. |
## Навигация по панели списка
| Key | Action | Info |
|-----|--------|-------------|
| `` , `` | Предыдущая страница | |
| `` . `` | Следующая страница | |
| `` <, <home> `` | Пролистать наверх | |
| `` >, <end> `` | Прокрутить вниз | |
| `` v `` | Переключить выборку перетаскивания | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Найти | |
| `` H `` | Прокрутить влево | |
| `` L `` | Прокрутить вправо | |
| `` ] `` | Следующая вкладка | |
| `` [ `` | Предыдущая вкладка | |
## Input prompt
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | Подтвердить | |
| `` <esc> `` | Закрыть/отменить | |
## Worktrees
| Key | Action | Info |
|-----|--------|-------------|
| `` n `` | New worktree | |
| `` <space> `` | Switch | Switch to the selected worktree. |
| `` o `` | Open in editor | |
| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
| `` / `` | Filter the current view by text | |
## Вторичный
| Key | Action | Info |
|-----|--------|-------------|
| `` <tab> `` | Переключиться на другую панель (проиндексированные/непроиндексированные изменения) | Switch to other view (staged/unstaged changes). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | Найти | |
## Главная панель (Индексирование)
| Key | Action | Info |
|-----|--------|-------------|
| `` <left>, h `` | Выбрать предыдущую часть | |
| `` <right>, l `` | Выбрать следующую часть | |
| `` v `` | Переключить выборку перетаскивания | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <ctrl+o> `` | Скопировать выделенный текст в буфер обмена | |
| `` <space> `` | Переключить индекс | Переключить строку в проиндексированные / непроиндексированные |
| `` d `` | Отменить изменение (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | Открыть файл | Open file in default application. |
| `` e `` | Редактировать файл | Open file in external editor. |
| `` <esc> `` | Вернуться к панели файлов | |
| `` <tab> `` | Переключиться на другую панель (проиндексированные/непроиндексированные изменения) | Switch to other view (staged/unstaged changes). |
| `` E `` | Изменить эту часть | Edit selected hunk in external editor. |
| `` c `` | Сохранить изменения | Commit staged changes. |
| `` w `` | Закоммитить изменения без предварительного хука коммита | |
| `` C `` | Сохранить изменения с помощью редактора git | |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Выйти из сборщика пользовательских патчей | |
| `` n `` | Создать новую ветку с этого коммита | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` s `` | Объединить коммиты (Squash) | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Объединить несколько коммитов в один отбросив сообщение коммита (Fixup) | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Перефразировать коммит | Reword the selected commit's message. |
| `` R `` | Переписать коммит с помощью редактора | |
| `` d `` | Удалить коммит | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` e `` | Edit (start interactive rebase) | Изменить коммит |
| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` p `` | Pick | Выбрать коммит (в середине перебазирования) |
| `` F `` | Создать fixup коммит | Создать fixup коммит для этого коммита |
| `` S `` | Apply fixup commits | Объединить все 'fixup!' коммиты выше в выбранный коммит (автосохранение) |
| `` <ctrl+j>, <alt+down> `` | Переместить коммит вниз на один | |
| `` <ctrl+k>, <alt+up> `` | Переместить коммит вверх на один | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Править последний коммит с проиндексированными изменениями |
| `` a `` | Установить/убрать автора коммита | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Пометить коммит тегом | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <ctrl+l> `` | Открыть меню журнала | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Переключить | Checkout the selected commit as a detached HEAD. |
| `` n `` | Создать новую ветку с этого коммита | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` o `` | Создать запрос на принятие изменений | |
| `` O `` | Создать параметры запроса принятие изменений | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | Скопировать URL запроса на принятие изменений в буфер обмена | |
| `` c `` | Переключить по названию | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | Принудительное переключение | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
| `` d `` | Delete | View delete options for local/remote branch. |
| `` r `` | Перебазировать переключённую ветку на эту ветку | Rebase the checked-out branch onto the selected branch. |
| `` M `` | Слияние с текущей переключённой веткой | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` f `` | Перемотать эту ветку вперёд из её upstream-ветки | Fast-forward selected branch from its upstream. |
| `` T `` | Создать тег | |
| `` s `` | Порядок сортировки | |
| `` g `` | Просмотреть параметры сброса | |
| `` R `` | Переименовать ветку | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` n `` | Создать новую ветку с этого коммита | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <space> `` | Переключить файлы включённые в патч | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Переключить все файлы, включённые в патч | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Введите файл, чтобы добавить выбранные строки в патч (или свернуть каталог переключения) | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
| `` ` `` | Переключить вид дерева файлов | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Filter the current view by text | |
## Статус
| Key | Action | Info |
|-----|--------|-------------|
| `` e `` | Редактировать файл конфигурации | Open file in external editor. |
| `` u `` | Проверить обновления | |
| `` <enter> `` | Переключиться на последний репозиторий | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` 0 `` | Focus main view | |
## Теги
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | Copy tag to clipboard | |
| `` <space> `` | Переключить | Checkout the selected tag as a detached HEAD. |
| `` n `` | Создать тег | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
| `` w `` | New worktree | |
| `` d `` | Delete | View delete options for local/remote tag. |
| `` P `` | Отправить тег | Push the selected tag to a remote. You'll be prompted to select a remote. |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` <ctrl+o> `` | Скопировать название ветки в буфер обмена | |
| `` <space> `` | Переключить | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
| `` n `` | Новая ветка | |
| `` w `` | New worktree | |
| `` M `` | Слияние с текущей переключённой веткой | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` r `` | Перебазировать переключённую ветку на эту ветку | Rebase the checked-out branch onto the selected branch. |
| `` d `` | Delete | Delete the remote branch from the remote. |
| `` u `` | Set as upstream | Установить как upstream-ветку переключённую ветку |
| `` s `` | Порядок сортировки | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` c `` | Сохранить изменения | Commit staged changes. |
| `` w `` | Закоммитить изменения без предварительного хука коммита | |
| `` A `` | Правка последнего коммита | |
| `` C `` | Сохранить изменения с помощью редактора git | |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | Открыть файл | Open file in default application. |
| `` i `` | Игнорировать или исключить файл | |
| `` r `` | Обновить файлы | |
| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
| `` S `` | Просмотреть параметры хранилища | View stash options (e.g. stash all, stash staged, stash unstaged). |
| `` a `` | Все проиндексированные/непроиндексированные | Toggle staged/unstaged for all files in working tree. |
| `` <enter> `` | Проиндексировать отдельные части/строки для файла или свернуть/развернуть для каталога | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
| `` d `` | Просмотреть параметры «отмены изменении» | View options for discarding changes to the selected file. |
| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | Переключить вид дерева файлов | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` f `` | Получить изменения | Fetch changes from remote. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Filter the current view by text | |
## Хранилище
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | Применить припрятанные изменения | Apply the stash entry to your working directory. |
| `` g `` | Применить припрятанные изменения и тут же удалить их из хранилища | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Удалить припрятанные изменения из хранилища | Remove the stash entry from the stash list. |
| `` n `` | Новая ветка | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` <alt+shift+c> `` | 编辑配置文件 | 使用外部编辑器打开文件 |
| `` z `` | 撤销 | Reflog将用于确定运行哪个git命令来撤消最后一个git命令。这并不包括对工作树的更改，只考虑提交。 |
| `` Z `` | 重做 | Reflog将用于确定运行哪个git命令来重做上一个git命令。这并不包括对工作树的更改，只考虑提交。 |
## 列表面板导航
| Key | Action | Info |
|-----|--------|-------------|
| `` , `` | 上一页 | |
| `` . `` | 下一页 | |
| `` <, <home> `` | 滚动到顶部 | |
| `` >, <end> `` | 滚动到底部 | |
| `` v `` | 切换拖动选择 | |
| `` <shift+down> `` | 向下扩展选择范围 | |
| `` <shift+up> `` | 向上扩展选择范围 | |
| `` / `` | 开始搜索 | |
| `` H `` | 向左滚动 | |
| `` L `` | 向右滚动 | |
| `` ] `` | 下一个标签 | |
| `` [ `` | 上一个标签 | |
## 子提交
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | 复制缩略提交哈希值到剪贴板 | |
| `` <space> `` | 检出 | 检出所选择的提交作为分离HEAD。 |
| `` y `` | 复制提交属性到剪贴板 | 复制提交属性到剪贴板(如hash、URL、diff、消息、作者)。 |
| `` o `` | 在浏览器中打开提交 | |
| `` n `` | 从提交创建新分支 | |
| `` N `` | 移动提交至新分支 | 创建一个新分支，并将当前分支未推送的提交移动到该分支。如果您打算开始新工作但忘记先创建新分支，这会很有用。<br><br>请注意，此操作忽略选择，新分支总是从主分支创建或堆叠在当前分支之上（您可以选择哪种方式）。 |
| `` @ `` | 開啟命令記錄選單 | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | 推送 | 推送到遠端。如果沒有設定遠端，會開啟設定視窗。 |
| `` p `` | 拉取 | 從遠端同步當前分支。如果沒有設定遠端，會開啟設定視窗。 |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | 增加差異檢視中顯示變更周圍上下文的大小 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | 減小差異檢視中顯示變更周圍上下文的大小 | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` <ctrl+p> `` | 檢視自訂補丁選項 | |
| `` m `` | 查看合併/變基選項 | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | 重新整理 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | 下一個螢幕模式（常規/半螢幕/全螢幕） | |
| `` _ `` | 上一個螢幕模式 | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` <esc> `` | 取消 | |
| `` ? `` | 開啟選單 | |
| `` <ctrl+s> `` | 檢視篩選路徑選項 | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | 結束 | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | 切換是否在差異檢視中顯示空格變更 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` % `` | Toggle mouse capture | Toggle whether lazygit captures mouse events. When mouse capture is off, the terminal handles the mouse, so you can select text with it; this is useful in terminals that don't have a modifier key to bypass the capture.<br><br>The default can be changed in the config file with the key 'gui.mouseEvents'. |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <ctrl+o> `` | 複製所選文本至剪貼簿 | |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` e `` | 編輯檔案 | 使用外部編輯器開啟 |
| `` <space> `` | 向 (或從) 補丁中添加/刪除行 | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | 退出自訂補丁建立器 | |
| `` / `` | 搜尋 | |
## 主面板（一般）
| Key | Action | Info |
|-----|--------|-------------|
| `` <mouse wheel down> (fn+up) `` | 向下捲動 | |
| `` <mouse wheel up> (fn+down) `` | 向上捲動 | |
| `` <tab> `` | 切換至另一個面板 (已預存/未預存更改) | Switch to other view (staged/unstaged changes). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | 搜尋 | |
## 主面板（合併）
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | 挑選程式碼片段 | |
| `` b `` | Pick both hunks | |
| `` <up>, k `` | 選擇上一段 | |
| `` <down>, j `` | 選擇下一段 | |
| `` <left>, h `` | 選擇上一個衝突 | |
| `` <right>, l `` | 選擇下一個衝突 | |
| `` z `` | 復原 | Undo last merge conflict resolution. |
| `` e `` | 編輯檔案 | 使用外部編輯器開啟 |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` <esc> `` | 返回檔案面板 | |
## 主面板（預存）
| Key | Action | Info |
|-----|--------|-------------|
| `` <left>, h `` | 選擇上一段 | |
| `` <right>, l `` | 選擇下一段 | |
| `` v `` | 切換拖曳選擇 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <ctrl+o> `` | 複製所選文本至剪貼簿 | |
| `` <space> `` | 切換預存 | 切換現有行的狀態 (已預存/未預存) |
| `` d `` | 刪除變更 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` e `` | 編輯檔案 | 使用外部編輯器開啟 |
| `` <esc> `` | 返回檔案面板 | |
| `` <tab> `` | 切換至另一個面板 (已預存/未預存更改) | Switch to other view (staged/unstaged changes). |
| `` E `` | 編輯程式碼塊 | Edit selected hunk in external editor. |
| `` c `` | 提交變更 | 提交暫存區變更 |
| `` w `` | 沒有預提交 hook 就提交更改 | |
| `` C `` | 使用 git 編輯器提交變更 | |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <ctrl+r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` * `` | Select commits of current branch | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | 檢視所選項目的檔案 | |
| `` / `` | 搜尋 | |
## 子模組
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | 複製子模組名稱到剪貼簿 | |
| `` <enter> `` | Enter | 進入子模組 |
| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
| `` u `` | Update | 更新子模組 |
| `` n `` | 新增子模組 | |
| `` e `` | 更新子模組 URL | |
| `` i `` | Initialize | 初始化子模組 |
| `` b `` | 查看批量子模組選項 | |
| `` / `` | 搜尋 | |
## 工作目錄
| Key | Action | Info |
|-----|--------|-------------|
| `` n `` | New worktree | |
| `` <space> `` | Switch | Switch to the selected worktree. |
| `` o `` | 在編輯器中開啟 | |
| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
| `` s `` | 壓縮 (Squash) | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | 修復 (Fixup) | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | 改寫提交 | 改寫選中的提交訊息 |
| `` R `` | 使用編輯器改寫提交 | |
| `` d `` | 刪除提交 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` e `` | 編輯(開始互動變基) | 編輯提交 |
| `` i `` | 開始互動變基 | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` B `` | 為了變基已標注提交為基準提交 | 請為了下一次變基選擇一項基準提交；此將執行 `git rebase --onto`。 |
| `` A `` | 修改 | 使用已預存的更改修正提交 |
| `` a `` | 設定/重設提交作者 | Set/Reset commit author or set co-author. |
| `` t `` | 還原 | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | 打標籤到提交 | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <ctrl+l> `` | 開啟記錄選單 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` * `` | Select commits of current branch | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | 檢視所選項目的檔案 | |
| `` / `` | 搜尋 | |
## 提交摘要
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | 確認 | |
| `` <esc> `` | 關閉 | |
## 提交檔案
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | 複製檔案名稱到剪貼簿 | |
| `` y `` | 複製到剪貼簿 | |
| `` c `` | 檢出 | 檢出檔案 |
| `` d `` | 捨棄 | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` e `` | 編輯 | 使用外部編輯器開啟 |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` <space> `` | 切換檔案是否包含在補丁中 | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | 切換所有檔案是否包含在補丁中 | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | 輸入檔案以將選定的行添加至補丁（或切換目錄折疊） | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
| `` ` `` | 顯示檔案樹狀視圖 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | 搜尋 | |
## 收藏 (Stash)
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | 套用 | Apply the stash entry to your working directory. |
| `` g `` | 還原 | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | 捨棄 | Remove the stash entry from the stash list. |
| `` n `` | 新分支 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <ctrl+r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` * `` | Select commits of current branch | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | 檢視提交 | |
| `` / `` | 搜尋 | |
## 本地分支
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | 複製分支名稱到剪貼簿 | |
| `` i `` | 顯示 git-flow 選項 | |
| `` <space> `` | 檢出 | 檢出選定的項目。 |
| `` n `` | 新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` o `` | 建立拉取請求 | |
| `` O `` | 建立拉取請求選項 | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | 複製拉取請求的 URL 到剪貼板 | |
| `` c `` | 根據名稱檢出 | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | 強制檢出 | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
| `` d `` | 刪除 | View delete options for local/remote branch. |
| `` r `` | 將已檢出的分支變基至此分支 | Rebase the checked-out branch onto the selected branch. |
| `` M `` | 合併到當前檢出的分支 | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` f `` | 從上游快進此分支 | 從遠端快進所選的分支 |
| `` T `` | 建立標籤 | |
| `` s `` | 排序規則 | |
| `` g `` | 檢視重設選項 | |
| `` R `` | 重新命名分支 | |
| `` u `` | 檢視遠端設定 | 檢視有關遠端分支的設定（例如重設至遠端） |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | 檢視提交 | |
| `` / `` | 搜尋 | |
## 標籤
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | Copy tag to clipboard | |
| `` <space> `` | 檢出 | Checkout the selected tag as a detached HEAD. |
| `` n `` | 建立標籤 | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
| `` w `` | New worktree | |
| `` d `` | 刪除 | View delete options for local/remote tag. |
| `` P `` | 推送標籤 | Push the selected tag to a remote. You'll be prompted to select a remote. |
| `` g `` | 重設 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | 編輯 | 使用外部編輯器開啟 |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` i `` | 忽略或排除檔案 | |
| `` r `` | 重新整理檔案 | |
| `` s `` | 收藏 | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
| `` S `` | 檢視收藏選項 | View stash options (e.g. stash all, stash staged, stash unstaged). |
| `` a `` | 全部預存/取消預存 | Toggle staged/unstaged for all files in working tree. |
| `` <enter> `` | 選擇檔案中的單個程式碼塊/行，或展開/折疊目錄 | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
| `` d `` | 捨棄 | 檢視選中變動進行捨棄復原 |
| `` g `` | 檢視遠端重設選項 | |
| `` D `` | 重設 | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | 顯示檔案樹狀視圖 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` f `` | 擷取 | 同步遠端異動 |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | 搜尋 | |
## 次要
| Key | Action | Info |
|-----|--------|-------------|
| `` <tab> `` | 切換至另一個面板 (已預存/未預存更改) | Switch to other view (staged/unstaged changes). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | 搜尋 | |
## 狀態
| Key | Action | Info |
|-----|--------|-------------|
| `` e `` | 編輯設定檔案 | 使用外部編輯器開啟 |
| `` u `` | 檢查更新 | |
| `` <enter> `` | 切換到最近使用的版本庫 | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` 0 `` | Focus main view | |
## 確認面板
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | 確認 | |
| `` <esc> `` | 關閉/取消 | |
| `` <ctrl+o> `` | 複製到剪貼簿 | |
## 遠端
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | View branches | |
| `` n `` | 新增遠端 | |
| `` d `` | Remove | Remove the selected remote. Any local branches tracking a remote branch from the remote will be unaffected. |
| `` e `` | 編輯 | 編輯遠端 |
| `` f `` | 擷取 | 擷取遠端 |
| `` F `` | Add fork remote | Quickly add a fork remote by replacing the owner in the origin URL and optionally check out a branch from new remote. |
| `` / `` | 搜尋 | |
## 遠端分支
| Key | Action | Info |
|-----|--------|-------------|
| `` <ctrl+o> `` | 複製分支名稱到剪貼簿 | |
| `` <space> `` | 檢出 | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
| `` n `` | 新分支 | |
| `` w `` | New worktree | |
| `` M `` | 合併到當前檢出的分支 | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` r `` | 將已檢出的分支變基至此分支 | Rebase the checked-out branch onto the selected branch. |
| `` d `` | 刪除 | Delete the remote branch from the remote. |
| `` u `` | 設置為遠端 | 將此分支設為當前分支之遠端 |
| `` s `` | 排序規則 | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
# The number of spaces per tab; used for everything that's shown in the main view, but probably mostly relevant for diffs.
# Note that when using a pager, the pager has its own tab width setting, so you need to pass it separately in the pager command.
# The number of spaces per tab; used for everything that's shown in the main
# view, but probably mostly relevant for diffs.
# Note that when using a pager, the pager has its own tab width setting, so you
# need to pass it separately in the pager command.
tabWidth:4
# If true, capture mouse events.
# When mouse events are captured, it's a little harder to select text: e.g. requiring you to hold the option key when on macOS.
# When mouse events are captured, it's a little harder to select text: e.g.
# requiring you to hold the option key when on macOS.
mouseEvents:true
# If true, do not show a warning when amending a commit.
@@ -81,45 +84,81 @@ gui:
# If true, do not show warning when applying/popping the stash
skipStashWarning:false
# If true, do not show a warning when attempting to commit without any staged files; instead stage all unstaged files.
# If true, do not show a warning when attempting to commit without any staged
# files; instead stage all unstaged files.
skipNoStagedFilesWarning:false
# If true, do not show a warning when rewording a commit via an external editor
skipRewordInEditorWarning:false
# Fraction of the total screen width to use for the left side section. You may want to pick a small number (e.g. 0.2) if you're using a narrow screen, so that you can see more of the main section.
# If true, switch to a different worktree without confirmation when checking out
# a branch that is checked out in that worktree
skipSwitchWorktreeOnCheckoutWarning:false
# Fraction of the total screen width to use for the left side section. You may
# want to pick a small number (e.g. 0.2) if you're using a narrow screen, so
# that you can see more of the main section.
# Number from 0 to 1.0.
sidePanelWidth:0.3333
# If true, increase the height of the focused side window; creating an accordion effect.
# If true, increase the height of the focused side window; creating an accordion
# effect.
expandFocusedSidePanel:false
# The weight of the expanded side panel, relative to the other panels. 2 means
# twice as tall as the other panels. Only relevant if `expandFocusedSidePanel` is true.
# twice as tall as the other panels. Only relevant if `expandFocusedSidePanel`
# is true.
expandedSidePanelWeight:2
# Sometimes the main window is split in two (e.g. when the selected file has both staged and unstaged changes). This setting controls how the two sections are split.
# If true, don't give a side panel more height than it needs to show its
# content; when all panels fit, the leftover height is shared among them so that
# they still fill the screen.
shrinkSidePanelsToContent:false
# The side panels, in the order they appear from top to bottom.
# Each entry is a list of one or more names that share a single panel as tabs
# (cycle through them with the next-tab/previous-tab keys).
# Omit a name to hide it; give a name its own one-element list to promote a tab
# One of 'auto' (default) | 'en' | 'zh-CN' | 'zh-TW' | 'pl' | 'nl' | 'ja' | 'ko'
# | 'ru' | 'pt'
language:auto
# Format used when displaying time e.g. commit time.
@@ -192,13 +231,24 @@ gui:
# If true, show the '5 of 20' footer at the bottom of list views
showListFooter:true
# If true, display the files in the file views as a tree. If false, display the files as a flat list.
# This can be toggled from within Lazygit with the '`' key, but that will not change the default.
# If true, display the files in the file views as a tree. If false, display the
# files as a flat list.
# This can be toggled from within Lazygit with the '`' key, but that will not
# change the default.
showFileTree:true
# If true, add a "/" root item in the file tree representing the root of the repository. It is only added when necessary, i.e. when there is more than one item at top level.
# If true, add a "/" root item in the file tree representing the root of the
# repository. It is only added when necessary, i.e. when there is more than one
# item at top level.
showRootItemInFileTree:true
# How to sort files and directories in the file tree.
# One of: 'mixed' (default) | 'filesFirst' | 'foldersFirst'
fileTreeSortOrder:mixed
# If true (default), sort the file tree case-sensitively.
fileTreeSortCaseSensitive:true
# If true, show the number of lines changed per file in the Files view
showNumstatInFilesView:false
@@ -208,7 +258,9 @@ gui:
# If true, show the command log
showCommandLog:true
# If true, show the bottom line that contains keybinding info and useful buttons. If false, this line will be hidden except to display a loader for an in-progress action.
# If true, show the bottom line that contains keybinding info and useful
# buttons. If false, this line will be hidden except to display a loader for an
# in-progress action.
showBottomLine:true
# If true, show jump-to-window keybindings in window titles.
@@ -219,10 +271,12 @@ gui:
# If empty, do not show icons.
nerdFontsVersion:""
# If true (default), file icons are shown in the file views. Only relevant if NerdFontsVersion is not empty.
# If true (default), file icons are shown in the file views. Only relevant if
# NerdFontsVersion is not empty.
showFileIcons:true
# Length of author name in (non-expanded) commits view. 2 means show initials only.
# Length of author name in (non-expanded) commits view. 2 means show initials
# only.
commitAuthorShortLength:2
# Length of author name in expanded commits view. 2 means show initials only.
@@ -243,10 +297,12 @@ gui:
# Whether to split the main window when viewing file changes.
# One of: 'auto' | 'always'
# If 'auto', only split the main window when a file has both staged and unstaged changes
# If 'auto', only split the main window when a file has both staged and unstaged
# changes
splitDiff:auto
# Default size for focused window. Can be changed from within Lazygit with '+' and '_' (but this won't change the default).
# Default size for focused window. Can be changed from within Lazygit with '+'
# and '_' (but this won't change the default).
# One of: 'normal' (default) | 'half' | 'full'
screenMode:normal
@@ -254,13 +310,24 @@ gui:
# One of 'rounded' (default) | 'single' | 'double' | 'hidden' | 'bold'
border:rounded
# If true, show a seriously epic explosion animation when nuking the working tree.
# If true, show a seriously epic explosion animation when nuking the working
# tree.
animateExplosion:true
# Whether to stack UI components on top of each other.
# One of 'auto' (default) | 'always' | 'never'
portraitMode:auto
# In 'auto' mode, portrait mode will be used if the window width is less than or
# equal to portraitModeAutoMaxWidth and the window height is greater than or
# equal to portraitModeAutoMinHeight. Unused when portraitMode is not 'auto'.
portraitModeAutoMaxWidth:84
# In 'auto' mode, portrait mode will be used if the window width is less than or
# equal to portraitModeAutoMaxWidth and the window height is greater than or
# equal to portraitModeAutoMinHeight. Unused when portraitMode is not 'auto'.
portraitModeAutoMinHeight:46
# How things are filtered when typing '/'.
# One of 'substring' (default) | 'fuzzy'
filterMode:substring
@@ -287,27 +354,44 @@ gui:
# If true, jump to the Files panel after applying a stash
switchToFilesAfterStashApply:true
# If true, when using the panel jump keys (default 1 through 5) and target panel is already active, go to next tab instead
# If true, when using the panel jump keys (default 1 through 5) and target panel
# is already active, go to next tab instead
switchTabsWithPanelJumpKeys:false
# Config relating to git
git:
# Array of pagers. Each entry has the following format:
#
# # A name for the pager, shown in the notification when cycling pagers.
# # If not set, the name is derived from the first word of the pager
# # command (or of the external diff command).
# name: ""
#
# # Value of the --color arg in the git diff command. Some pagers want
# # this to be set to 'always' and some want it set to 'never'
# 'pager', 'externalDiffCommand', and 'useExternalDiffGitConfig' are mutually
# exclusive; set at most one per entry.
#
# See https://github.com/jesseduffield/lazygit/blob/master/docs/Custom_Pagers.md
paging:
# Value of the --color arg in the git diff command. Some pagers want this to be set to 'always' and some want it set to 'never'
colorArg:always
# e.g.
# diff-so-fancy
# delta --dark --paging=never
# ydiff -p cat -s --wrap --width={{columnWidth}}
pager:""
# If true, Lazygit will use whatever pager is specified in `$GIT_PAGER`, `$PAGER`, or your *git config*. If the pager ends with something like ` | less` we will strip that part out, because less doesn't play nice with our rendering approach. If the custom pager uses less under the hood, that will also break rendering (hence the `--paging=never` flag for the `delta` pager).
useConfig:false
# e.g. 'difft --color=always'
externalDiffCommand:""
# for more information.
pagers:[]
# Config relating to committing
commit:
@@ -322,22 +406,26 @@ git:
# Config relating to merging
merging:
# If true, run merges in a subprocess so that if a commit message is required, Lazygit will not hang
# If true, run merges in a subprocess so that if a commit message is required,
# Lazygit will not hang
# Only applicable to unix users.
manualCommit:false
# Extra args passed to `git merge`, e.g. --no-ff
args:""
# The commit message to use for a squash merge commit. Can contain "{{selectedRef}}" and "{{currentBranch}}" placeholders.
# The commit message to use for a squash merge commit. Can contain
# "{{selectedRef}}" and "{{currentBranch}}" placeholders.
squashMergeMessage:Squash merge {{selectedRef}} into {{currentBranch}}
# list of branches that are considered 'main' branches, used when displaying commits
# list of branches that are considered 'main' branches, used when displaying
# commits
mainBranches:
- master
- main
# Prefix to use when skipping hooks. E.g. if set to 'WIP', then pre-commit hooks will be skipped when the commit message starts with 'WIP'
# Prefix to use when skipping hooks. E.g. if set to 'WIP', then pre-commit hooks
# will be skipped when the commit message starts with 'WIP'
skipHookPrefix:WIP
# If true, periodically fetch from remote
@@ -346,7 +434,15 @@ git:
# If true, periodically refresh files and submodules
autoRefresh:true
# If not "none", lazygit will automatically fast-forward local branches to match their upstream after fetching. Applies to branches that are not the currently checked out branch, and only to those that are strictly behind their upstream (as opposed to diverged).
# If true, poll the repo periodically for external ref changes (commits, branch
# updates, checkouts made outside lazygit) and refresh when one is detected.
# Independent of autoRefresh, which only governs the files panel.
autoDetectExternalChanges:true
# If not "none", lazygit will automatically fast-forward local branches to match
# their upstream after fetching. Applies to branches that are not the currently
# checked out branch, and only to those that are strictly behind their upstream
# (as opposed to diverged).
# Possible values: 'none' | 'onlyMainBranches' | 'allBranches'
autoForwardBranches:onlyMainBranches
@@ -354,25 +450,30 @@ git:
fetchAll:true
# If true, lazygit will automatically stage files that used to have merge
# conflicts but no longer do; and it will also ask you if you want to
# continue a merge or rebase if you've resolved all conflicts. If false, it
# won't do either of these things.
# conflicts but no longer do; and it will also ask you if you want to continue a
# merge or rebase if you've resolved all conflicts. If false, it won't do either
# of these things.
autoStageResolvedConflicts:true
# Command used when displaying the current branch git log in the main window
# If true, git diffs are rendered with the `--ignore-all-space` flag, which ignores whitespace changes. Can be toggled from within Lazygit with `<c-w>`.
# If true, git diffs are rendered with the `--ignore-all-space` flag, which
# ignores whitespace changes. Can be toggled from within Lazygit with
# `<ctrl+w>`.
ignoreWhitespaceInDiffView:false
# The number of lines of context to show around each diff hunk. Can be changed from within Lazygit with the `{` and `}` keys.
# The number of lines of context to show around each diff hunk. Can be changed
# from within Lazygit with the `{` and `}` keys.
diffContextSize:3
# The threshold for considering a file to be renamed, in percent. Can be changed from within Lazygit with the `(` and `)` keys.
# The threshold for considering a file to be renamed, in percent. Can be changed
# from within Lazygit with the `(` and `)` keys.
renameSimilarityThreshold:50
# If true, do not spawn a separate process when using GPG
@@ -400,32 +501,46 @@ git:
# 'topo-order' makes it easier to read the git log graph, but commits may not
# appear chronologically. See https://git-scm.com/docs/
#
# Can be changed from within Lazygit with `Log menu -> Commit sort order` (`<c-l>` in the commits window by default).
# Can be changed from within Lazygit with `Log menu -> Commit sort order`
# (`<ctrl+l>` in the commits window by default).
order:topo-order
# This determines whether the git graph is rendered in the commits panel
# One of 'always' | 'never' | 'when-maximised'
#
# Can be toggled from within lazygit with `Log menu -> Show git graph` (`<c-l>` in the commits window by default).
# Can be toggled from within lazygit with `Log menu -> Show git graph`
# (`<ctrl+l>` in the commits window by default).
showGraph:always
# displays the whole git graph by default in the commits view (equivalent to passing the `--all` argument to `git log`)
# displays the whole git graph by default in the commits view (equivalent to
# passing the `--all` argument to `git log`)
showWholeGraph:false
# How branches are sorted in the local branches view.
# One of: 'date' (default) | 'recency' | 'alphabetical'
# Can be changed from within Lazygit with the Sort Order menu (`s`) in the branches panel.
# Can be changed from within Lazygit with the Sort Order menu (`s`) in the
# branches panel.
localBranchSortOrder:date
# How branches are sorted in the remote branches view.
# One of: 'date' (default) | 'alphabetical'
# Can be changed from within Lazygit with the Sort Order menu (`s`) in the remote branches panel.
# Can be changed from within Lazygit with the Sort Order menu (`s`) in the
# remote branches panel.
remoteBranchSortOrder:date
# When copying commit hashes to the clipboard, truncate them to this
# length. Set to 40 to disable truncation.
# When copying commit hashes to the clipboard, truncate them to this length. Set
# to 40 to disable truncation.
truncateCopiedCommitHashesTo:12
# Config relating to git worktrees
worktree:
# Default parent directory for new worktrees. It is offered as a candidate
# location alongside the parent directories of any worktrees you already have.
# A relative path is resolved against the repository's root directory, so
# "../worktrees" sits beside the repo and ".worktrees" sits inside it.
# A leading "~" is expanded to your home directory, so "~/worktrees" works.
defaultPath:""
# Periodic update checks
update:
# One of: 'prompt' (default) | 'background' | 'never'
@@ -444,13 +559,20 @@ refresher:
# Auto-fetch can be disabled via option 'git.autoFetch'.
fetchInterval:60
# Interval in seconds at which lazygit polls for external ref changes (commits,
# branch updates, checkouts made outside lazygit).
# Detection can be disabled via option 'git.autoDetectExternalChanges'.
externalChangeCheckInterval:2
# If true, show a confirmation popup before quitting Lazygit
confirmOnQuit:false
# If true, exit Lazygit when the user presses escape in a context where there is nothing to cancel/close
# If true, exit Lazygit when the user presses escape in a context where there is
# nothing to cancel/close
quitOnTopLevelReturn:false
# Config relating to things outside of Lazygit like how files are opened, copying to clipboard, etc
# Config relating to things outside of Lazygit like how files are opened,
# copying to clipboard, etc
os:
# Command for editing a file. Should contain "{{filename}}".
edit:""
@@ -459,8 +581,8 @@ os:
# "{{filename}}", and may optionally contain "{{line}}".
editAtLine:""
# Same as EditAtLine, except that the command needs to wait until the
# window is closed.
# Same as EditAtLine, except that the command needs to wait until the window is
# closed.
editAtLineAndWait:""
# Whether lazygit suspends until an edit process returns
@@ -469,12 +591,12 @@ os:
# For opening a directory in an editor
openDirInEditor:""
# A built-in preset that sets all of the above settings. Supported presets
# are defined in the getPreset function in editor_presets.go.
# A built-in preset that sets all of the above settings. Supported presets are
# defined in the getPreset function in editor_presets.go.
editPreset:""
# Command for opening a file, as if the file is double-clicked. Should
# contain "{{filename}}", but doesn't support "{{line}}".
# Command for opening a file, as if the file is double-clicked. Should contain
# "{{filename}}", but doesn't support "{{line}}".
open:""
# Command for opening a link. Should contain "{{link}}".
@@ -488,7 +610,9 @@ os:
# See https://github.com/jesseduffield/lazygit/blob/master/docs/Config.md#custom-command-for-copying-to-and-pasting-from-clipboard
readFromClipboardCmd:""
# A shell startup file containing shell aliases or shell functions. This will be sourced before running any shell commands, so that shell functions are available in the `:` command prompt or even in custom commands.
# A shell startup file containing shell aliases or shell functions. This will be
# sourced before running any shell commands, so that shell functions are
# available in the `:` command prompt or even in custom commands.
# See https://github.com/jesseduffield/lazygit/blob/master/docs/Config.md#using-aliases-or-functions-in-shell-commands
shellFunctionsFile:""
@@ -503,44 +627,41 @@ customCommands: []
services:{}
# What to do when opening Lazygit outside of a git repo.
# - 'prompt': (default) ask whether to initialize a new repo or open in the most recent repo
# - 'prompt': (default) ask whether to initialize a new repo or open in the most
# recent repo
# - 'create': initialize a new repo
# - 'skip': open most recent repo
# - 'quit': exit Lazygit
notARepository:prompt
# If true, display a confirmation when subprocess terminates. This allows you to view the output of the subprocess before returning to Lazygit.
# If true, display a confirmation when subprocess terminates. This allows you to
# view the output of the subprocess before returning to Lazygit.
promptToReturnFromSubprocess:true
# Keybindings
# Keybindings.
# Each binding can be a single key or a list of keys; see
@@ -958,7 +1097,7 @@ Supported versions are "2" and "3". The deprecated config `showIcons` sets the v
## Keybindings
For all possible keybinding options, check [Custom_Keybindings.md](https://github.com/jesseduffield/lazygit/blob/master/docs/keybindings/Custom_Keybindings.md)
For all possible keybinding options, check [Custom_Keybindings.md](keybindings/Custom_Keybindings.md)
You can disable certain key bindings by specifying `<disabled>`.
@@ -968,6 +1107,12 @@ keybinding:
edit:<disabled># disable 'edit file'
```
### Overriding the platform for default keybindings
A few keybindings have different defaults on macOS than on Linux and Windows (e.g. word-wise cursor movement in text inputs uses `alt` on macOS but `ctrl` elsewhere). Lazygit picks these based on the OS it's running on, but you can override that with the `LAZYGIT_KEYBINDING_PLATFORM` environment variable. Set it to `darwin`, `linux`, or `windows`; any other value is ignored and the actual OS is used.
This is useful when running lazygit in a Linux container that you access over ssh from a Mac, where you'd rather use the macOS keybindings.
### Example Keybindings For Colemak Users
```yaml
@@ -1012,9 +1157,11 @@ services:
Where:
-`gitDomain` stands for the domain used by git itself (i.e. the one present on clone URLs), e.g. `git.work.com`
-`provider` is one of `github`, `bitbucket`, `bitbucketServer`, `azuredevops`, `gitlab` or`gitea`
-`provider` is one of `github`, `bitbucket`, `bitbucketServer`, `azuredevops`, `gitlab`,`gitea` or `codeberg`
-`webDomain` is the URL where your git service exposes a web interface and APIs, e.g. `gitservice.work.com`
For the `github` provider, configuring an entry here also enables the pull-request icons in the branches panel for that host (e.g. a GitHub Enterprise Server instance). Lazygit picks up the auth token via the same mechanisms as the `gh` CLI: the `GH_ENTERPRISE_TOKEN` / `GITHUB_ENTERPRISE_TOKEN` environment variables, or `gh auth login --hostname <webDomain>`.
## Predefined commit message prefix
In situations where certain naming pattern is used for branches and commits, pattern can be used to populate commit message with prefix that is parsed from the branch name.
@@ -50,7 +50,7 @@ Custom command keybindings will appear alongside inbuilt keybindings when you vi
For a given custom command, here are the allowed fields:
| _field_ | _description_ | required |
|-----------------|----------------------|-|
| key | The key to trigger the command. Use a single letter or one of the values from [here](https://github.com/jesseduffield/lazygit/blob/master/docs/keybindings/Custom_Keybindings.md). Custom commands without a key specified can be triggered by selecting them from the keybindings (`?`) menu | no |
| key | The key to trigger the command. Use a single key or list of keys, as described in [Custom_Keybindings.md](https://github.com/jesseduffield/lazygit/blob/master/docs/keybindings/Custom_Keybindings.md). Custom commands without a key specified can be triggered by selecting them from the keybindings (`?`) menu | no |
| command | The command to run (using Go template syntax for placeholder values) | yes |
| context | The context in which to listen for the key (see [below](#contexts)) | yes |
| prompts | A list of prompts that will request user input before running the final command | no |
@@ -74,6 +74,7 @@ The permitted contexts are:
| status | The 'Status' tab |
| files | The 'Files' tab |
| worktrees | The 'Worktrees' tab |
| submodules | The 'Submodules' tab |
| localBranches | The 'Local Branches' tab |
| remotes | The 'Remotes' tab |
| remoteBranches | The context you get when pressing enter on a remote in the remotes tab |
@@ -101,6 +102,7 @@ These fields are applicable to all prompts.
| type | One of 'input', 'confirm', 'menu', 'menuFromCommand' | yes |
| title | The title to display in the popup panel | no |
| key | Used to reference the entered value from within the custom command. E.g. a prompt with `key: 'Branch'` can be referred to as `{{.Form.Branch}}` in the command | yes |
| condition | A Go template expression; if it resolves to empty string or `false`, the prompt is skipped. See [Conditional prompts](#conditional-prompts) | no |
### Input
@@ -191,6 +193,7 @@ The permitted option fields are:
| name | The first part of the label | no |
| description | The second part of the label | no |
| value | the value that will be used in the command | yes |
| key | Keybinding to invoke this menu option without needing to navigate to it. Use a single key or list of keys, as described in [Custom_Keybindings.md](https://github.com/jesseduffield/lazygit/blob/master/docs/keybindings/Custom_Keybindings.md) | no |
If an option has no name the value will be displayed to the user in place of the name, so you're allowed to only include the value like so:
@@ -232,6 +235,34 @@ customCommands:
description:'branch for a release'
```
Here's an example of supplying keybindings for menu options:
```yml
customCommands:
- key:'a'
command:'echo {{.Form.BranchType | quote}}'
context:'commits'
prompts:
- type:'menu'
title:'What kind of branch is it?'
key:'BranchType'
options:
- value:'feature'
name:'feature branch'
description:'branch based off develop'
key:'f'
- value:'hotfix'
name:'hotfix branch'
description:'branch based off main for fast bug fixes'
key:'h'
- value:'release'
name:'release branch'
description:'branch for a release'
key:'r'
```
In this example, pressing 'f', 'h', or 'r' will directly select the corresponding option without needing to navigate to it first.
### Menu-from-command
| _field_ | _description_ | _required_ |
@@ -289,6 +320,41 @@ Here's an example using a command but not specifying anything else: so each line
In this example the 'Branch prefix' menu only appears if the user chose 'With prefix'. Otherwise it is skipped and `.Form.Prefix` defaults to empty string.
## Placeholder values
Your commands can contain placeholder strings using Go's [template syntax](https://jan.newmarch.name/golang/template/chapter-template.html). The template syntax is pretty powerful, letting you do things like conditionals if you want, but for the most part you'll simply want to be accessing the fields on the following objects:
Lazygit supports custom pagers, [configured](/docs/Config.md) in the config.yml file (which can be opened by pressing `e` in the Status panel).
Support does not extend to Windows users, because we're making use of a package which doesn't have Windows support.
Multiple pagers are supported; you can cycle through them with the `|` key. This can be useful if you usually prefer a particular pager, but want to use a different one for certain kinds of diffs.
## Default:
Pagers are configured with the `pagers` array in the git section; here's an example for a multi-pager setup (use an empty object `{}` for the default builtin diff display that doesn't use a pager):
the `colorArg` key is for whether you want the `--color=always` arg in your `git diff` command. Some pagers want it set to `always`, others want it set to `never`.
The `colorArg` key is for whether you want the `--color=always` arg in your `git diff` command. Some pagers want it set to `always`, others want it set to `never`. The default is `always`, since that's what most pagers need.
## Delta:
```yaml
git:
paging:
colorArg:always
pager:delta --dark --paging=never
pagers:
- pager:delta --dark --paging=never
```
A cool feature of delta is --hyperlinks, which renders clickable links for the line numbers in the left margin, and lazygit supports these. To use them, set the `pager:` config to `delta --dark --paging=never --line-numbers --hyperlinks --hyperlinks-file-link-format="lazygit-edit://{path}:{line}"`; this allows you to click on an underlined line number in the diff to jump right to that same line in your editor.
Note that delta's `--navigate` option doesn't work in lazygit, for technical reasons.
## Diff-so-fancy
```yaml
git:
paging:
colorArg:always
pager:diff-so-fancy
pagers:
- pager:diff-so-fancy
```
@@ -45,26 +48,15 @@ git:
gui:
sidePanelWidth:0.2# gives you more space to show things side-by-side
Be careful with this one, I think the homebrew and pip versions are behind master. I needed to directly download the ydiff script to get the no-pager functionality working.
## Using git config
```yaml
git:
paging:
colorArg:always
useConfig:true
```
If you set `useConfig: true`, lazygit will use whatever pager is specified in `$GIT_PAGER`, `$PAGER`, or your *git config*. If the pager ends with something like ` | less` we will strip that part out, because less doesn't play nice with our rendering approach. If the custom pager uses less under the hood, that will also break rendering (hence the `--paging=never` flag for the `delta` pager).
## Using external diff commands
Some diff tools can't work as a simple pager like the ones above do, because they need access to the entire diff, so just post-processing git's diff is not enough for them. The most notable example is probably [difftastic](https://difftastic.wilfred.me.uk).
@@ -73,16 +65,44 @@ These can be used in lazygit by using the `externalDiffCommand` config; in the c
```yaml
git:
paging:
externalDiffCommand:difft --color=always
pagers:
- externalDiffCommand:difft --color=always
```
The `colorArg`, `pager`, and `useConfig` options are not used in this case.
The `colorArg` option is not used in this case.
You can add whatever extra arguments you prefer for your difftool; for instance
This can also be used for normal git diffs with custom parameters, such as `--color-words` or `--word-diff` which some people find useful. To do that, save a script like this to, say, `~/bin/color-words.sh`:
Instead of setting this command in lazygit's `externalDiffCommand` config, you can also tell lazygit to use the external diff command that is configured in git itself (`diff.external`), by using
```yaml
git:
pagers:
- useExternalDiffGitConfig:true
```
This can be useful if you also want to use it for diffs on the command line, and it also has the advantage that you can configure it per file type in `.gitattributes`; see https://git-scm.com/docs/gitattributes#_defining_an_external_diff_driver.
`pager`, `externalDiffCommand`, and `useExternalDiffGitConfig` are alternative ways of producing the diff, so a pager entry may use at most one of them.
@@ -2,15 +2,13 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
# Lazygit Keybindings
_Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
## Global keybindings
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-r> `` | Switch to a recent repo | |
| `` <pgup> (fn+up/shift+k) `` | Scroll up main window | |
| `` <pgdown> (fn+down/shift+j) `` | Scroll down main window | |
| `` <ctrl+r> `` | Switch to a recent repo | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Scroll up main window | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Scroll down main window | |
| `` @ `` | View command log options | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Push | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | Pull | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
@@ -19,20 +17,23 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` <c-p> `` | View custom patch options | |
| `` <ctrl+p> `` | View custom patch options | |
| `` m `` | View merge/rebase options | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | Refresh | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` <c-s> `` | View filter options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | Quit | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pagerin the list of configured pagers. |
| `` <esc> `` | Cancel | |
| `` <c-w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` ? `` | Open keybindings menu | |
| `` <ctrl+s> `` | View filter options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Quit | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Edit config file | Open file in external editor. |
| `` z `` | Undo | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` <c-z> `` | Redo | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
## List panel navigation
@@ -40,11 +41,11 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` , `` | Previous page | |
| `` . `` | Next page | |
| `` < (<home>) `` | Scroll to top | |
| `` > (<end>) `` | Scroll to bottom | |
| `` <, <home> `` | Scroll to top | |
| `` >, <end> `` | Scroll to bottom | |
| `` v `` | Toggle range select | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Search the current view by text | |
| `` H `` | Scroll left | |
| `` L `` | Scroll right | |
@@ -55,13 +56,13 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy path to clipboard | |
| `` <ctrl+o> `` | Copy path to clipboard | |
| `` y `` | Copy to clipboard | |
| `` c `` | Checkout | Checkout file. This replaces the file in your working tree with the version from the selected commit. |
| `` d `` | Remove | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` d `` | Discard | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` o `` | Open file | Open file in default application. |
| `` e `` | Edit | Open file in external editor. |
| `` <space> `` | Toggle file included in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Toggle all files | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Enter file / Toggle directory collapsed | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
@@ -69,7 +70,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Search the current view by text | |
| `` / `` | Filter the current view by text | |
## Commit summary
@@ -82,11 +83,12 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Reword | Reword the selected commit's message. |
| `` R `` | Reword with editor | |
| `` d `` | Drop | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
@@ -95,27 +97,28 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` p `` | Pick | Mark the selected commit to be picked (when mid-rebase). This means that the commit will be retained upon continuing the rebase. |
| `` F `` | Create fixup commit | Create 'fixup!' commit for the selected commit. Later on, you can press `S` on this same commit to apply all above fixup commits. |
| `` S `` | Apply fixup commits | Squash all 'fixup!' commits, either above the selected commit, or all in current branch (autosquash). |
| `` <c-j> `` | Move commit down one | |
| `` <c-k> `` | Move commit up one | |
| `` <ctrl+j>, <alt+down> `` | Move commit down one | |
| `` <ctrl+k>, <alt+up> `` | Move commit up one | |
| `` V `` | Paste (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Amend commit with staged changes. If the selected commit is the HEAD commit, this will perform `git commit --amend`. Otherwise the commit will be amended via a rebase. |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <ctrl+l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` w `` | Commit changes without pre-commit hook | |
| `` A `` | Amend last commit | |
| `` C `` | Commit changes using git editor | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | Open file | Open file in default application. |
| `` i `` | Ignore or exclude file | |
@@ -150,26 +154,35 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | View upstream reset options | |
| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | Toggle file tree view | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` c `` | Checkout by name | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | Force checkout | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
@@ -182,10 +195,9 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Reset | |
| `` R `` | Rename branch | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` <tab> `` | Switch view | Switch to other view (staged/unstaged changes). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | Search the current view by text | |
@@ -218,14 +230,15 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | Go to previous hunk | |
| `` <right> `` | Go to next hunk | |
| `` <left>, h `` | Go to previous hunk | |
| `` <right>, l `` | Go to next hunk | |
| `` v `` | Toggle range select | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Copy selected text to clipboard | |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` o `` | Open file | Open file in default application. |
| `` e `` | Edit file | Open file in external editor. |
| `` <space> `` | Toggle lines in patch | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Exit custom patch builder | |
| `` / `` | Search the current view by text | |
@@ -233,11 +246,11 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | Go to previous hunk | |
| `` <right> `` | Go to next hunk | |
| `` <left>, h `` | Go to previous hunk | |
| `` <right>, l `` | Go to next hunk | |
| `` v `` | Toggle range select | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Copy selected text to clipboard | |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` d `` | Discard | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | Open file | Open file in default application. |
@@ -248,7 +261,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` c `` | Commit | Commit staged changes. |
| `` w `` | Commit changes without pre-commit hook | |
| `` C `` | Commit changes using git editor | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Search the current view by text | |
## Menu
@@ -256,46 +269,46 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
@@ -307,6 +320,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` d `` | Remove | Remove the selected remote. Any local branches tracking a remote branch from the remote will be unaffected. |
| `` e `` | Edit | Edit the selected remote's name or URL. |
| `` f `` | Fetch | Fetch updates from the remote repository. This retrieves new commits and branches without merging them into your local branches. |
| `` F `` | Add fork remote | Quickly add a fork remote by replacing the owner in the origin URL and optionally check out a branch from new remote. |
| `` / `` | Filter the current view by text | |
## Secondary
@@ -325,48 +339,48 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Drop | Remove the stash entry from the stash list. |
| `` n `` | New branch | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` w `` | New worktree | |
| `` r `` | Rename stash | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | View files | |
| `` w `` | View worktree options | |
| `` / `` | Filter the current view by text | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Open config file | Open file in default application. |
| `` e `` | Edit config file | Open file in external editor. |
| `` u `` | Check for update | |
| `` <enter> `` | Switch to a recent repo | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` } `` | 差分コンテキストサイズを増やす | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | 差分コンテキストサイズを減らす | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` <esc> `` | キャンセル | |
| `` <c-w> `` | 空白表示の切り替え | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+w> `` | 空白表示の切り替え | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` s `` | スカッシュ | 選択したコミットをその下のコミットにスカッシュします。スカッシュとは複数のコミットを1つにまとめる操作です。選択したコミットのメッセージが下のコミットに追加されます。 |
| `` f `` | フィックスアップ | 選択したコミットをその下のコミットにマージします。フィックスアップはスカッシュと似ていますが、選択したコミットのメッセージは破棄され、下のコミットのメッセージのみが保持されます。 |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | メッセージ変更 | 選択したコミットのメッセージを変更します。 |
| `` R `` | エディタでメッセージ変更 | |
| `` d `` | 削除 | 選択したコミットを削除します。これはリベースを通じてブランチからコミットを削除します。コミットが後続のコミットが依存する変更を行っている場合、マージコンフリクトを解決する必要があるかもしれません。 |
| `` y `` | コミット属性をクリップボードにコピー | コミット属性をクリップボードにコピーします（例：ハッシュ、URL、差分、メッセージ、作者）。 |
| `` o `` | ブラウザでコミットを開く | |
| `` n `` | コミットから新しいブランチを作成 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` ` `` | ファイルツリービューを切り替え | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` y `` | コミット属性をクリップボードにコピー | コミット属性をクリップボードにコピーします（例：ハッシュ、URL、差分、メッセージ、作者）。 |
| `` o `` | ブラウザでコミットを開く | |
| `` n `` | コミットから新しいブランチを作成 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` D `` | リセット | 作業ツリーのリセットオプション（例：作業ツリーの完全破棄）を表示します。 |
| `` ` `` | ファイルツリービューを切り替え | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` <c-t> `` | 外部差分ツールを開く（git difftool） | |
| `` M `` | 外部マージツールを開く | `git mergetool`を実行します。 |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 選択したテキストをクリップボードにコピー | |
| `` a `` | ハンクの選択を切り替える | Toggle line-by-line vs. hunk selection mode. |
| `` <ctrl+o> `` | 選択したテキストをクリップボードにコピー | |
| `` o `` | ファイルを開く | デフォルトのアプリケーションでファイルを開きます。 |
| `` e `` | ファイルを編集 | 外部エディタでファイルを開きます。 |
| `` <space> `` | パッチ内の行を切り替え | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` y `` | コミット属性をクリップボードにコピー | コミット属性をクリップボードにコピーします（例：ハッシュ、URL、差分、メッセージ、作者）。 |
| `` o `` | ブラウザでコミットを開く | |
| `` n `` | コミットから新しいブランチを作成 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | 新しいワークツリー | |
| `` o `` | プルリクエストを作成 | |
| `` O `` | プルリクエスト作成オプションを表示 | |
| `` <c-y> `` | プルリクエストURLをクリップボードにコピー | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | プルリクエストURLをクリップボードにコピー | |
| `` c `` | 名前でチェックアウト | 名前でチェックアウトします。入力ボックスに「-」を入力すると、最後のブランチをチェックアウトすることができます。 |
| `` - `` | Checkout previous branch | |
| `` - `` | 直前のブランチにチェックアウト | |
| `` F `` | 強制チェックアウト | 選択したブランチを強制的にチェックアウトします。これにより、選択したブランチをチェックアウトする前にワーキングディレクトリ内のすべてのローカル変更が破棄されます。 |
| `` d `` | 削除 | ローカル/リモートブランチの削除オプションを表示します。 |
| `` r `` | リベース | チェックアウトしたブランチを選択したブランチ上にリベースします。 |
| `` @ `` | 명령어 로그 메뉴 열기 | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | 푸시 | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | 업데이트 | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
@@ -19,20 +17,23 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` } `` | Diff 보기의 변경 사항 주위에 표시되는 컨텍스트의 크기를 늘리기 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Diff 보기의 변경 사항 주위에 표시되는 컨텍스트 크기 줄이기 | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` <c-p> `` | 커스텀 Patch 옵션 보기 | |
| `` <ctrl+p> `` | 커스텀 Patch 옵션 보기 | |
| `` m `` | View merge/rebase options | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | 새로고침 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | 다음 스크린 모드 (normal/half/fullscreen) | |
| `` _ `` | 이전 스크린 모드 | |
| `` ? `` | 매뉴 열기 | |
| `` <c-s> `` | View filter-by-path options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | Diff 메뉴 열기 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | Diff 메뉴 열기 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | 종료 | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pagerin the list of configured pagers. |
| `` <esc> `` | 취소 | |
| `` <c-w> `` | 공백문자를 Diff 뷰에서 표시 여부 전환 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` ? `` | 매뉴 열기 | |
| `` <ctrl+s> `` | View filter-by-path options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Diff 메뉴 열기 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | 종료 | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | 공백문자를 Diff 뷰에서 표시 여부 전환 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | 설정 파일 수정 | Open file in external editor. |
| `` z `` | 되돌리기 (reflog) (실험적) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` <c-z> `` | 다시 실행 (reflog) (실험적) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | 다시 실행 (reflog) (실험적) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
## List panel navigation
@@ -40,35 +41,42 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 브라우저에서 커밋 열기 | |
| `` n `` | 커밋에서 새 브랜치를 만듭니다. | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
@@ -87,30 +95,30 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Drop | Remove the stash entry from the stash list. |
| `` n `` | 새 브랜치 생성 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 브라우저에서 커밋 열기 | |
| `` n `` | 커밋에서 새 브랜치를 만듭니다. | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
@@ -128,7 +136,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | 실행 | |
| `` <esc> `` | 닫기 | |
| `` <esc> `` | 닫기/취소 | |
| `` / `` | Filter the current view by text | |
## 메인 패널 (Merging)
@@ -136,23 +144,23 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | Pick hunk | |
| `` b `` | Pick all hunks | |
| `` <up> `` | 이전 hunk를 선택 | |
| `` <down> `` | 다음 hunk를 선택 | |
| `` <left> `` | 이전 충돌을 선택 | |
| `` <right> `` | 다음 충돌을 선택 | |
| `` b `` | Pick both hunks | |
| `` <up>, k `` | 이전 hunk를 선택 | |
| `` <down>, j `` | 다음 hunk를 선택 | |
| `` <left>, h `` | 이전 충돌을 선택 | |
| `` <right>, l `` | 다음 충돌을 선택 | |
| `` z `` | 되돌리기 | Undo last merge conflict resolution. |
| `` e `` | 파일 편집 | Open file in external editor. |
| `` o `` | 파일 닫기 | Open file in default application. |
| `` M `` | Git mergetool를 열기 | Run `git mergetool`. |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` <esc> `` | 파일 목록으로 돌아가기 | |
## 메인 패널 (Normal)
| Key | Action | Info |
|-----|--------|-------------|
| `` mouse wheel down (fn+up) `` | 아래로 스크롤 | |
| `` mouse wheel up (fn+down) `` | 위로 스크롤 | |
| `` <mouse wheel down> (fn+up) `` | 아래로 스크롤 | |
| `` <mouse wheel up> (fn+down) `` | 위로 스크롤 | |
| `` <tab> `` | 패널 전환 | Switch to other view (staged/unstaged changes). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | 검색 시작 | |
@@ -161,14 +169,15 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | 이전 hunk를 선택 | |
| `` <right> `` | 다음 hunk를 선택 | |
| `` <left>, h `` | 이전 hunk를 선택 | |
| `` <right>, l `` | 다음 hunk를 선택 | |
| `` v `` | 드래그 선택 전환 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` <ctrl+o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` o `` | 파일 닫기 | Open file in default application. |
| `` e `` | 파일 편집 | Open file in external editor. |
| `` <space> `` | Line(s)을 패치에 추가/삭제 | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Exit custom patch builder | |
| `` / `` | 검색 시작 | |
@@ -176,11 +185,11 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | 이전 hunk를 선택 | |
| `` <right> `` | 다음 hunk를 선택 | |
| `` <left>, h `` | 이전 hunk를 선택 | |
| `` <right>, l `` | 다음 hunk를 선택 | |
| `` v `` | 드래그 선택 전환 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` <ctrl+o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` <space> `` | Staged 전환 | 선택한 행을 staged / unstaged |
| `` d `` | 변경을 삭제 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | 파일 닫기 | Open file in default application. |
@@ -188,24 +197,26 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <esc> `` | 파일 목록으로 돌아가기 | |
| `` <tab> `` | 패널 전환 | Switch to other view (staged/unstaged changes). |
| `` E `` | Edit hunk | Edit selected hunk in external editor. |
| `` c `` | 커밋 변경내용 | Commit staged changes. |
| `` c `` | 커밋 변경내용 | 스테이징된 변경 사항 커밋. |
| `` w `` | Commit changes without pre-commit hook | |
| `` C `` | Git 편집기를 사용하여 변경 내용을 커밋합니다. | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` o `` | 풀 리퀘스트 생성 | |
| `` O `` | 풀 리퀘스트 생성 옵션 | |
| `` <c-y> `` | 풀 리퀘스트 URL을 클립보드에 복사 | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | 풀 리퀘스트 URL을 클립보드에 복사 | |
| `` c `` | 이름으로 체크아웃 | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | 강제 체크아웃 | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
@@ -218,28 +229,27 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | View reset options | |
| `` R `` | 브랜치 이름 변경 | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` s `` | 스쿼시 | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | 커밋메시지 변경 | Reword the selected commit's message. |
| `` R `` | 에디터에서 커밋메시지 수정 | |
| `` d `` | 커밋 삭제 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
@@ -296,40 +308,41 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` F `` | Create fixup commit | Create fixup commit for this commit |
| `` S `` | Apply fixup commits | Squash all 'fixup!' commits above selected commit (autosquash) |
| `` <c-j> `` | 커밋을 1개 아래로 이동 | |
| `` <c-k> `` | 커밋을 1개 위로 이동 | |
| `` <ctrl+j>, <alt+down> `` | 커밋을 1개 아래로 이동 | |
| `` <ctrl+k>, <alt+up> `` | 커밋을 1개 위로 이동 | |
| `` V `` | 커밋을 붙여넣기 (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Amend commit with staged changes |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | 로그 메뉴 열기 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <ctrl+l> `` | 로그 메뉴 열기 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 브라우저에서 커밋 열기 | |
| `` n `` | 커밋에서 새 브랜치를 만듭니다. | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <space> `` | Toggle file included in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Toggle all files included in patch | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Enter file to add selectedlines to the patch (or toggle directory collapsed) | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
@@ -337,7 +350,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | 검색 시작 | |
| `` / `` | Filter the current view by text | |
## 커밋메시지
@@ -350,31 +363,31 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy tag to clipboard | |
| `` <ctrl+o> `` | Copy tag to clipboard | |
| `` <space> `` | 체크아웃 | Checkout the selected tag as a detached HEAD. |
| `` n `` | 태그를 생성 | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
| `` w `` | New worktree | |
| `` d `` | 삭제 | View delete options for local/remote tag. |
| `` P `` | 태그를 push | Push the selected tag to a remote. You'll be prompted to select a remote. |
| `` g `` | 초기화 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` <space> `` | Staged 전환 | Toggle staged for selected file. |
| `` <c-b> `` | 파일을 필터하기 (Staged/unstaged) | |
| `` <ctrl+b> `` | 파일을 필터하기 (Staged/unstaged) | |
| `` y `` | 클립보드에 복사 | |
| `` c `` | 커밋 변경내용 | Commit staged changes. |
| `` c `` | 커밋 변경내용 | 스테이징된 변경 사항 커밋. |
| `` w `` | Commit changes without pre-commit hook | |
| `` A `` | 마지맛 커밋 수정 | |
| `` C `` | Git 편집기를 사용하여 변경 내용을 커밋합니다. | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | 파일 닫기 | Open file in default application. |
| `` i `` | Ignore file | |
@@ -387,13 +400,13 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | View upstream reset options | |
| `` D `` | 초기화 | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | 파일 트리뷰로 전환 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
@@ -2,37 +2,38 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
# Lazygit Sneltoetsen
_Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
## Globale sneltoetsen
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-r> `` | Wissel naar een recente repo | |
| `` <pgup> (fn+up/shift+k) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` <pgdown> (fn+down/shift+j) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` <ctrl+r> `` | Wissel naar een recente repo | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` @ `` | View command log options | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Push | Push the current branch to its upstreambranch. If no upstream is configured, you will be prompted to configure an upstreambranch. |
| `` p `` | Pull | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstreambranch. |
| `` P `` | Push | Push de huidige branch naar de bijbehorende upstream-branch. Als er geen upstream is geconfigureerd wordt er gevraagd om een upstream-branch te configureren. |
| `` p `` | Pull | Pull wijzigingen van de remote voor de huidige branch. Als er geen upstream is geconfigureerd wordt er gevraagd om een upstream-branch te configureren. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Bekijk merge/rebase opties | Toon abort/continue/skip opties voor huidige merge/rebase. |
| `` R `` | Verversen | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | Volgende scherm modus (normaal/half/groot) | |
| `` _ `` | Vorige scherm modus | |
| `` ? `` | Open menu | |
| `` <c-s> `` | Bekijk scoping opties | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | Quit | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pagerin the list of configured pagers. |
| `` <esc> `` | Annuleren | |
| `` <c-w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` ? `` | Open menu | |
| `` <ctrl+s> `` | Bekijk scoping opties | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Afsluiten | |
| `` <ctrl+z> `` | Pauzeer de applicatie | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Verander config bestand | Open bestand in externe editor. |
| `` z `` | Ongedaan maken (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` <c-z> `` | Redo (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
## Lijstpaneel navigatie
@@ -40,14 +41,14 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` , `` | Vorige pagina | |
| `` . `` | Volgende pagina | |
| `` < (<home>) `` | Scroll naar boven | |
| `` > (<end>) `` | Scroll naar beneden | |
| `` <, <home> `` | Scroll naar boven | |
| `` >, <end> `` | Scroll naar beneden | |
| `` v `` | Toggle drag selecteer | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Start met zoeken | |
| `` H `` | Scroll left | |
| `` L `` | Scroll right | |
| `` H `` | Scroll naar links | |
| `` L `` | Scroll naar rechts | |
| `` ] `` | Volgende tabblad | |
| `` [ `` | Vorige tabblad | |
@@ -55,17 +56,17 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Kopieer de bestandsnaam naar het klembord | |
| `` <ctrl+o> `` | Kopieer de bestandsnaam naar het klembord | |
| `` w `` | Commit veranderingen zonder pre-commit hook | |
| `` A `` | Wijzig laatste commit | |
| `` C `` | Commit veranderingen met de git editor | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | Open bestand | Open file in default application. |
| `` <ctrl+f> `` | Find base commit for fixup | Vind de commit waar je huidige wijzigingen bovenop zijn gebouwd met als doel die commit te amenden/fixen. Hierdoor hoef je dit niet met de hand te doen. Zie: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open bestand in externe editor. |
| `` o `` | Open bestand | Open bestand in standaardapplicatie. |
| `` i `` | Ignore or exclude file | |
| `` r `` | Refresh bestanden | |
| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
@@ -74,15 +75,15 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <enter> `` | Stage individuele hunks/lijnen | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
| `` d `` | Bekijk 'veranderingen ongedaan maken' opties | View options for discarding changes to the selected file. |
| `` g `` | Bekijk upstream reset opties | |
| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
| `` D `` | Resetten | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | Toggle bestandsboom weergave | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` o `` | Maak een pull-request | |
| `` O `` | Bekijk opties voor pull-aanvraag | |
| `` <c-y> `` | Kopieer de URL van het pull-verzoek naar het klembord | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | Kopieer de URL van het pull-verzoek naar het klembord | |
| `` c `` | Uitchecken bij naam | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` - `` | Vorige branch uitchecken | |
| `` F `` | Forceer checkout | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
| `` d `` | Delete | View delete options for local/remote branch. |
| `` r `` | Rebase branch | Rebase the checked-out branch onto the selected branch. |
| `` d `` | Verwijderen | View delete options for local/remote branch. |
| `` r `` | Rebase branch | Rebase de uitgecheckte branch bovenop de geselecteerde branch. |
| `` M `` | Merge in met huidige checked out branch | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` f `` | Fast-forward deze branch vanaf zijn upstream | Fast-forward selected branch from its upstream. |
| `` T `` | Creëer tag | |
@@ -115,10 +119,9 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Bekijk reset opties | |
| `` R `` | Hernoem branch | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` <space> `` | Toggle bestand inbegrepen in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Toggle all files | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Enter bestand om geselecteerde regels toe te voegen aan de patch | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
| `` ` `` | Toggle bestandsboom weergave | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` = `` | Vouw alle bestanden uit | Vouw alle mappen in de bestandsstructuur uit |
| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Hernoem commit | Reword the selected commit's message. |
| `` R `` | Hernoem commit met editor | |
| `` d `` | Verwijder commit | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
@@ -165,29 +169,37 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` p `` | Pick | Kies commit (wanneer midden in rebase) |
| `` <ctrl+k>, <alt+up> `` | Verplaats commit 1 naar boven | |
| `` V `` | Plak commits (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Wijzig commit met staged veranderingen |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <ctrl+l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Sluit lijn-bij-lijn modus | |
| `` / `` | Start met zoeken | |
@@ -241,50 +254,51 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <c-o> `` | Kopieer branch name naar klembord | |
| `` <space> `` | Uitchecken | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
| `` <ctrl+o> `` | Kopieer branch name naar klembord | |
| `` <space> `` | Uitchecken | Geselecteerde remote branch uitchecken als nieuwe locale branch of als detached head. |
| `` n `` | Nieuwe branch | |
| `` w `` | New worktree | |
| `` M `` | Merge in met huidige checked out branch | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` r `` | Rebase branch | Rebase the checked-out branch onto the selected branch. |
| `` d `` | Delete | Delete the remote branch from the remote. |
| `` u `` | Set as upstream | Stel in als upstream van uitgecheckte branch |
| `` r `` | Rebase branch | Rebase de uitgecheckte branch bovenop de geselecteerde branch. |
| `` d `` | Verwijderen | Delete the remote branch from the remote. |
| `` u `` | Instellen als upstream | Stel in als upstream van uitgecheckte branch |
| `` s `` | Sort order | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` d `` | Verwijdert change (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | Open bestand | Open file in default application. |
| `` e `` | Verander bestand | Open file in external editor. |
| `` o `` | Open bestand | Open bestand in standaardapplicatie. |
| `` e `` | Verander bestand | Open bestand in externe editor. |
| `` <esc> `` | Ga terug naar het bestanden paneel | |
| `` <tab> `` | Ga naar een ander paneel | Switch to other view (staged/unstaged changes). |
| `` E `` | Edit hunk | Edit selected hunk in external editor. |
| `` w `` | Commit veranderingen zonder pre-commit hook | |
| `` C `` | Commit veranderingen met de git editor | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Vind de commit waar je huidige wijzigingen bovenop zijn gebouwd met als doel die commit te amenden/fixen. Hierdoor hoef je dit niet met de hand te doen. Zie: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Start met zoeken | |
## Stash
@@ -325,50 +339,50 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Laten vallen | Remove the stash entry from the stash list. |
| `` n `` | Nieuwe branch | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` r `` | Rename stash | |
| `` w `` | New worktree | |
| `` r `` | Hernoem stash | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | Bekijk gecommite bestanden | |
| `` w `` | View worktree options | |
| `` / `` | Filter the current view by text | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Open config bestand | Open file in default application. |
| `` e `` | Verander config bestand | Open file in external editor. |
| `` e `` | Verander config bestand | Open bestand in externe editor. |
| `` u `` | Check voor updates | |
| `` <enter> `` | Wissel naar een recente repo | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
@@ -398,6 +412,6 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` n `` | New worktree | |
| `` <space> `` | Switch | Switch to the selected worktree. |
| `` o `` | Open in editor | |
| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
| `` o `` | Openen in editor | |
| `` d `` | Verwijderen | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
@@ -2,37 +2,38 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
# Lazygit Skróty klawiszowe
_Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
## Globalne skróty klawiszowe
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-r> `` | Przełącz na ostatnie repozytorium | |
| `` <pgup> (fn+up/shift+k) `` | Przewiń główne okno w górę | |
| `` <pgdown> (fn+down/shift+j) `` | Przewiń główne okno w dół | |
| `` <ctrl+r> `` | Przełącz na ostatnie repozytorium | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Przewiń główne okno w górę | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Przewiń główne okno w dół | |
| `` @ `` | Pokaż opcje dziennika poleceń | Pokaż opcje dla dziennika poleceń, np. pokazywanie/ukrywanie dziennika poleceń i skupienie na dzienniku poleceń. |
| `` P `` | Wypchnij | Wypchnij bieżącą gałąź do jej gałęzi nadrzędnej. Jeśli nie skonfigurowano gałęzi nadrzędnej, zostaniesz poproszony o skonfigurowanie gałęzi nadrzędnej. |
| `` p `` | Pociągnij | Pociągnij zmiany z zdalnego dla bieżącej gałęzi. Jeśli nie skonfigurowano gałęzi nadrzędnej, zostaniesz poproszony o skonfigurowanie gałęzi nadrzędnej. |
| `` p `` | Pociągnij | Pociągnij zmiany ze zdalnego dla bieżącej gałęzi. Jeśli nie skonfigurowano gałęzi nadrzędnej, zostaniesz poproszony o skonfigurowanie gałęzi nadrzędnej. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Zwiększ rozmiar kontekstu w widoku różnic | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Zmniejsz rozmiar kontekstu w widoku różnic | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Pokaż opcje scalania/rebase | Pokaż opcje do przerwania/kontynuowania/pominięcia bieżącego scalania/rebase. |
| `` R `` | Odśwież | Odśwież stan git (tj. uruchom `git status`, `git branch`, itp. w tle, aby zaktualizować zawartość paneli). To nie uruchamia `git fetch`. |
| `` <c-s> `` | Pokaż opcje filtrowania | Pokaż opcje filtrowania dziennika commitów, tak aby pokazywane były tylko commity pasujące do filtra. |
| `` W `` | Pokaż opcje różnicowania | Pokaż opcje dotyczące różnicowania dwóch refów, np. różnicowanie względem wybranego refa, wprowadzanie refa do różnicowania i odwracanie kierunku różnic. |
| `` <c-e> `` | Pokaż opcje różnicowania | Pokaż opcje dotyczące różnicowania dwóch refów, np. różnicowanie względem wybranego refa, wprowadzanie refa do różnicowania i odwracanie kierunku różnic. |
| `` q `` | Wyjdź | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` <esc> `` | Anuluj | |
| `` <c-w> `` | Przełącz białe znaki | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` ? `` | Otwórz menu przypisań klawiszy | |
| `` <ctrl+s> `` | Pokaż opcje filtrowania | Pokaż opcje filtrowania dziennika commitów, tak aby pokazywane były tylko commity pasujące do filtra. |
| `` W, <ctrl+e> `` | Pokaż opcje różnicowania | Pokaż opcje dotyczące różnicowania dwóch refów, np. różnicowanie względem wybranego refa, wprowadzanie refa do różnicowania i odwracanie kierunku różnic. |
| `` q, <ctrl+c> `` | Wyjdź | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Przełącz białe znaki | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` z `` | Cofnij | Dziennik reflog zostanie użyty do określenia, jakie polecenie git należy uruchomić, aby cofnąć ostatnie polecenie git. Nie obejmuje to zmian w drzewie roboczym; brane są pod uwagę tylko commity. |
| `` <c-z> `` | Ponów | Dziennik reflog zostanie użyty do określenia, jakie polecenie git należy uruchomić, aby ponowić ostatnie polecenie git. Nie obejmuje to zmian w drzewie roboczym; brane są pod uwagę tylko commity. |
| `` Z `` | Ponów | Dziennik reflog zostanie użyty do określenia, jakie polecenie git należy uruchomić, aby ponowić ostatnie polecenie git. Nie obejmuje to zmian w drzewie roboczym; brane są pod uwagę tylko commity. |
## Nawigacja panelu listy
@@ -40,11 +41,11 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
|-----|--------|-------------|
| `` , `` | Poprzednia strona | |
| `` . `` | Następna strona | |
| `` < (<home>) `` | Przewiń do góry | |
| `` > (<end>) `` | Przewiń do dołu | |
| `` <, <home> `` | Przewiń do góry | |
| `` >, <end> `` | Przewiń do dołu | |
| `` v `` | Przełącz zaznaczenie zakresu | |
| `` <s-down> `` | Zaznacz zakres w dół | |
| `` <s-up> `` | Zaznacz zakres w górę | |
| `` <shift+down> `` | Zaznacz zakres w dół | |
| `` <shift+up> `` | Zaznacz zakres w górę | |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
| `` H `` | Przewiń w lewo | |
| `` L `` | Przewiń w prawo | |
@@ -55,40 +56,42 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` s `` | Scal | Scal wybrany commit z commitami poniżej. Wiadomość wybranego commita zostanie dołączona do commita poniżej. |
| `` f `` | Poprawka | Włącz wybrany commit do commita poniżej. Podobnie do fixup, ale wiadomość wybranego commita zostanie odrzucona. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` d `` | Usuń | Usuń wybrany commit. To usunie commit z gałęzi za pomocą rebazowania. Jeśli commit wprowadza zmiany, od których zależą późniejsze commity, być może będziesz musiał rozwiązać konflikty scalania. |
| `` e `` | Edytuj (rozpocznij interaktywne rebazowanie) | Edytuj wybrany commit. Użyj tego, aby rozpocząć interaktywne rebazowanie od wybranego commita. Podczas trwania rebazowania, to oznaczy wybrany commit do edycji, co oznacza, że po kontynuacji rebazowania, rebazowanie zostanie wstrzymane na wybranym commicie, aby umożliwić wprowadzenie zmian. |
| `` i `` | Rozpocznij interaktywny rebase | Rozpocznij interaktywny rebase dla commitów na twoim branchu. To będzie zawierać wszystkie commity od HEAD do pierwszego commita scalenia lub commita głównego brancha.<br>Jeśli chcesz zamiast tego rozpocząć interaktywny rebase od wybranego commita, naciśnij `e`. |
| `` p `` | Wybierz | Oznacz wybrany commit do wybrania (podczas rebazowania). Oznacza to, że commit zostanie zachowany po kontynuacji rebazowania. |
| `` d `` | Usuń | Usuń wybrany commit. To usunie commit z gałęzi za pomocą przebazowania. Jeśli commit wprowadza zmiany, od których zależą późniejsze commity, być może będziesz musiał rozwiązać konflikty scalania. |
| `` e `` | Edytuj (rozpocznij interaktywne przebazowanie) | Edytuj wybrany commit. Użyj tego, aby rozpocząć interaktywne przebazowanie od wybranego commita. Podczas trwania przebazowania, to oznaczy wybrany commit do edycji, co oznacza, że po kontynuacji przebazowania, przebazowanie zostanie wstrzymane na wybranym commicie, aby umożliwić wprowadzenie zmian. |
| `` i `` | Rozpocznij interaktywne przebazowanie | Rozpocznij interaktywne przebazowanie dla commitów na twojej gałęzi. To będzie zawierać wszystkie commity od HEAD do pierwszego commita scalenia lub commita głównej gałęzi.<br>Jeśli zamiast tego chcesz rozpocząć interaktywne przebazowanie od wybranego commita, naciśnij `e`. |
| `` p `` | Wybierz | Oznacz wybrany commit do wybrania (podczas przebazowania). Oznacza to, że commit zostanie zachowany po kontynuacji przebazowania. |
| `` F `` | Utwórz commit fixup | Utwórz commit 'fixup!' dla wybranego commita. Później możesz nacisnąć `S` na tym samym commicie, aby zastosować wszystkie powyższe commity fixup. |
| `` S `` | Zastosuj commity fixup | Scal wszystkie commity 'fixup!', albo powyżej wybranego commita, albo wszystkie w bieżącej gałęzi (autosquash). |
| `` B `` | Oznacz jako bazowy commit dla rebase | Wybierz bazowy commit dla następnego rebase. Kiedy robisz rebase na branch, tylko commity powyżej bazowego commita zostaną przeniesione. Używa to polecenia `git rebase --onto`. |
| `` A `` | Popraw | Popraw commit ze zmianami zatwierdzonymi. Jeśli wybrany commit jest commit HEAD, to wykona `git commit --amend`. W przeciwnym razie commit zostanie poprawiony za pomocą rebazowania. |
| `` B `` | Oznacz jako bazowy commit dla przebazowania | Wybierz bazowy commit dla następnego przebazowania. Kiedy robisz przebazowanie na gałąź, tylko commity powyżej bazowego commita zostaną przeniesione. Używa to polecenia `git rebase --onto`. |
| `` A `` | Popraw | Popraw commit ze zmianami zatwierdzonymi. Jeśli wybrany commit jest commit HEAD, to wykona `git commit --amend`. W przeciwnym razie commit zostanie poprawiony za pomocą przebazowania. |
| `` a `` | Popraw atrybut commita | Ustaw/Resetuj autora commita lub ustaw współautora. |
| `` t `` | Cofnij | Utwórz commit cofający dla wybranego commita, który stosuje zmiany wybranego commita w odwrotnej kolejności. |
| `` T `` | Otaguj commit | Utwórz nowy tag wskazujący na wybrany commit. Zostaniesz poproszony o wprowadzenie nazwy tagu i opcjonalnego opisu. |
| `` <c-l> `` | Zobacz opcje logów | Zobacz opcje dla logów commitów, np. zmiana kolejności sortowania, ukrywanie grafu gita, pokazywanie całego grafu gita. |
| `` <ctrl+l> `` | Zobacz opcje logów | Zobacz opcje dla logów commitów, np. zmiana kolejności sortowania, ukrywanie grafu gita, pokazywanie całego grafu gita. |
| `` G `` | Otwórz żądanie ściągnięcia w przeglądarce | |
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
| `` <left>, h `` | Idź do poprzedniego fragmentu | |
| `` <right>, l `` | Idź do następnego fragmentu | |
| `` v `` | Przełącz zaznaczenie zakresu | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Kopiuj zaznaczony tekst do schowka | |
| `` <ctrl+o> `` | Kopiuj zaznaczony tekst do schowka | |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
| `` e `` | Edytuj plik | Otwórz plik w zewnętrznym edytorze. |
| `` <space> `` | Przełącz linie w łatce | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` o `` | Utwórz żądanie ściągnięcia | |
| `` O `` | Zobacz opcje tworzenia pull requesta | |
| `` c `` | Przełącz według nazwy | Przełącz według nazwy. W polu wprowadzania możesz wpisać '-' aby przełączyć się na ostatnią gałąź. |
| `` - `` | Checkout previous branch | |
| `` - `` | Przełącz na poprzednią gałąź | |
| `` F `` | Wymuś przełączenie | Wymuś przełączenie wybranej gałęzi. To spowoduje odrzucenie wszystkich lokalnych zmian w drzewie roboczym przed przełączeniem na wybraną gałąź. |
| `` d `` | Odrzuć | Gdy zaznaczona jest niezatwierdzona zmiana, odrzuć ją używając `git reset`. Gdy zaznaczona jest zatwierdzona zmiana, cofnij zatwierdzenie. |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
@@ -207,7 +239,7 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` c `` | Commit | Zatwierdź zmiany zatwierdzone. |
| `` w `` | Zatwierdź zmiany bez hooka pre-commit | |
| `` C `` | Zatwierdź zmiany używając edytora git | |
| `` <c-f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
## Panel potwierdzenia
@@ -216,20 +248,21 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` <ctrl+b> `` | Filtruj pliki według statusu | |
| `` y `` | Kopiuj do schowka | |
| `` c `` | Commit | Zatwierdź zmiany zatwierdzone. |
| `` w `` | Zatwierdź zmiany bez hooka pre-commit | |
| `` A `` | Popraw ostatni commit | |
| `` C `` | Zatwierdź zmiany używając edytora git | |
| `` <c-f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edytuj | Otwórz plik w zewnętrznym edytorze. |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
| `` i `` | Ignoruj lub wyklucz plik | |
@@ -242,25 +275,25 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` g `` | Pokaż opcje resetowania do upstream | |
| `` D `` | Reset | Wyświetl opcje resetu dla drzewa roboczego (np. zniszczenie drzewa roboczego). |
| `` ` `` | Przełącz widok drzewa plików | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` f `` | Pobierz | Pobierz zmiany ze zdalnego serwera. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
| `` / `` | Filtruj bieżący widok po tekście | |
## Pliki commita
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Kopiuj ścieżkę do schowka | |
| `` <ctrl+o> `` | Kopiuj ścieżkę do schowka | |
| `` y `` | Kopiuj do schowka | |
| `` c `` | Przełącz | Przełącz plik. Zastępuje plik w twoim drzewie roboczym wersją z wybranego commita. |
| `` d `` | Usuń | Odrzuć zmiany w tym pliku z tego commita. Uruchamia interaktywny rebase w tle, więc możesz otrzymać konflikt scalania, jeśli późniejszy commit również zmienia ten plik. |
| `` d `` | Odrzuć | Odrzuć zmiany w tym pliku z tego commita. Uruchamia interaktywne przebazowanie w tle, więc możesz otrzymać konflikt scalania, jeśli późniejszy commit również zmienia ten plik. |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
| `` e `` | Edytuj | Otwórz plik w zewnętrznym edytorze. |
| `` <space> `` | Przełącz plik włączony w łatkę | Przełącz, czy plik jest włączony w niestandardową łatkę. Zobacz https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Przełącz wszystkie pliki | Dodaj/usuń wszystkie pliki commita do niestandardowej łatki. Zobacz https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Wejdź do pliku / Przełącz zwiń katalog | Jeśli plik jest wybrany, wejdź do pliku, aby móc dodawać/usuwać poszczególne linie do niestandardowej łatki. Jeśli wybrany jest katalog, przełącz katalog. |
@@ -268,7 +301,7 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
| `` / `` | Filtruj bieżący widok po tekście | |
## Podsumowanie commita
@@ -277,26 +310,6 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
@@ -305,48 +318,48 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` g `` | Wyciągnij | Zastosuj wpis schowka do katalogu roboczego i usuń wpis schowka. |
| `` d `` | Usuń | Usuń wpis schowka z listy schowka. |
| `` n `` | Nowa gałąź | Utwórz nową gałąź z wybranego wpisu schowka. Działa poprzez przełączenie git na commit, na którym wpis schowka został utworzony, tworzenie nowej gałęzi z tego commita, a następnie zastosowanie wpisu schowka do nowej gałęzi jako dodatkowego commita. |
| `` w `` | Nowe drzewo pracy | |
| `` r `` | Zmień nazwę schowka | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | Wyświetl pliki | |
| `` w `` | Zobacz opcje drzewa pracy | |
| `` / `` | Filtruj bieżący widok po tekście | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Otwórz plik konfiguracyjny | Otwórz plik w domyślnej aplikacji. |
| `` e `` | Edytuj plik konfiguracyjny | Otwórz plik w zewnętrznym edytorze. |
| `` u `` | Sprawdź aktualizacje | |
| `` <enter> `` | Przełącz na ostatnie repozytorium | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
# Lazygit Keybindings
_Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
# Lazygit Atalhos do teclado
## Combinações globais de teclas
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-r> `` | Mudar para um repositório recente | |
| `` <pgup> (fn+up/shift+k) `` | Rolar janela principal para cima | |
| `` <pgdown> (fn+down/shift+j) `` | Rolar a janela principal para baixo | |
| `` <ctrl+r> `` | Mudar para um repositório recente | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Rolar janela principal para cima | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Rolar a janela principal para baixo | |
| `` @ `` | View command log options | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Empurre (Push) | Faça push do branch atual para o seu branch upstream. Se nenhum upstream estiver configurado, você será solicitado a configurar um branch a montante. |
| `` p `` | Puxar (Pull) | Puxe alterações do controle remoto para o ramo atual. Se nenhum upstream estiver configurado, será solicitado configurar um ramo a montante. |
@@ -19,51 +17,54 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Executar comando da shell | Traga um prompt onde você pode digitar um comando shell para executar. |
| `` <c-p> `` | Ver opções de patch personalizadas | |
| `` <ctrl+p> `` | Ver opções de patch personalizadas | |
| `` m `` | Ver opções de mesclar/rebase | Ver opções para abortar/continuar/pular o merge/rebase atual. |
| `` R `` | Atualizar | Atualize o estado do git (ou seja, execute `git status`, `git branch`, etc em segundo plano para atualizar o conteúdo de painéis). Isso não executa `git fetch`. |
| `` <c-s> `` | View filter options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | Sair | |
| `` + `` | Modo de tela seguinte (normal/metade/tela cheia) | |
| `` _ `` | Modo de tela anterior | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pagerin the list of configured pagers. |
| `` <esc> `` | Cancelar | |
| `` <c-w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` ? `` | Abrir o menu de atalhos do teclado | |
| `` <ctrl+s> `` | Ver opções de filtro | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Sair | |
| `` <ctrl+z> `` | Suspender a aplicação | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Editar arquivo de configuração | Abrir arquivo no editor externo. |
| `` z `` | Desfazer | O reflog será usado para determinar qual comando git para executar para desfazer o último comando git. Isto não inclui mudanças na árvore de trabalho; apenas compromissos são tidos em consideração. |
| `` <c-z> `` | Refazer | O reflog será usado para determinar qual comando git para executar para refazer o último comando git. Isto não inclui mudanças na árvore de trabalho; apenas compromissos são tidos em consideração. |
| `` Z `` | Refazer | O reflog será usado para determinar qual comando git para executar para refazer o último comando git. Isto não inclui mudanças na árvore de trabalho; apenas compromissos são tidos em consideração. |
## List panel navigation
| Key | Action | Info |
|-----|--------|-------------|
| `` , `` | Previous page | |
| `` . `` | Next page | |
| `` < (<home>) `` | Scroll to top | |
| `` > (<end>) `` | Scroll to bottom | |
| `` , `` | Aba anterior | |
| `` . `` | Próxima aba | |
| `` <, <home> `` | Voltar ao topo | |
| `` >, <end> `` | Ir para o final | |
| `` v `` | Toggle range select | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` / `` | Search the current view by text | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Pesquisar na visualização atual por texto | |
| `` H `` | Rolar à esquerda | |
| `` L `` | Scroll para a direita | |
| `` ] `` | Next tab | |
| `` [ `` | Previous tab | |
| `` ] `` | Próxima aba | |
| `` [ `` | Aba anterior | |
## Arquivos
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy path to clipboard | |
| `` <ctrl+o> `` | Copiar caminho para área de transferência | |
| `` <space> `` | Etapa | Alternar para staging para o arquivo selecionado. |
| `` <c-b> `` | Filtrar arquivos por status | |
| `` <ctrl+b> `` | Filtrar arquivos por status | |
| `` y `` | Copy to clipboard | |
| `` c `` | Commit | Submeter mudanças em staging |
| `` w `` | Fazer commit de alterações sem pré-commit | |
| `` A `` | Alterar último commit | |
| `` C `` | Enviar alteração usando um editor Git | |
| `` <c-f> `` | Encontrar commit da base para consertar | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Encontrar commit da base para corrigir | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Editar | Abrir arquivo no editor externo. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` i `` | Ignore or exclude file | |
@@ -76,92 +77,94 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | View upstream reset options | |
| `` D `` | Restaurar | Opções de redefinição de exibição para árvore de trabalho (por exemplo, nukando a árvore de trabalho). |
| `` ` `` | Alternar exibição de árvore de arquivo | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` o `` | Create pull request | |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` o `` | Criar solicitação de pull | |
| `` O `` | View create pull request options | |
| `` <c-y> `` | Copiar URL do pull request para área de transferência | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | Copiar URL do pull request para área de transferência | |
| `` c `` | Checar por nome | Checar por nome. Na caixa de entrada você pode inserir '-' para trocar para a última branch |
| `` - `` | Checkout previous branch | |
| `` - `` | Checkout da branch anterior | |
| `` F `` | Forçar checagem | Forçar checagem da branch selecionada. Isso irá descartar todas as mudanças no seu diretório de trabalho antes cheque a branch selecionada |
| `` d `` | Apagar | Ver opções de exclusão para a branch local/remoto. |
| `` r `` | Refazer | Refazer a branch checada na branch selecionada |
| `` M `` | Mesclar | Ver opções para mesclar o item selecionado no branch atual (mesclar regularmente, mesclar squash) |
| `` f `` | Avanço rápido | Encaminhamento rápido de branch selecionada a partir do upstream. |
| `` T `` | New tag | |
| `` T `` | Nova etiqueta | |
| `` s `` | Sort order | |
| `` g `` | Restaurar | |
| `` R `` | Rename branch | |
| `` R `` | Renomear branch | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` / `` | Filtrar a visualização atual por texto | |
## Commit arquivos
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy path to clipboard | |
| `` <ctrl+o> `` | Copiar caminho para área de transferência | |
| `` y `` | Copy to clipboard | |
| `` c `` | Verificar | Arquivo de check-out. Isso substitui o arquivo em sua árvore de trabalho com a versão do commit selecionado. |
| `` d `` | Remover | Descartar as alterações desse commit para este arquivo. Isso executa uma rebase interativa em segundo plano, então você pode ter um conflito de merge se um commit posterior também alterar este arquivo. |
| `` d `` | Descartar | Descartar as alterações desse commit para este arquivo. Isso executa uma rebase interativa em segundo plano, então você pode ter um conflito de merge se um commit posterior também alterar este arquivo. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` e `` | Editar | Abrir arquivo no editor externo. |
| `` <space> `` | Alternar entre o arquivo incluído no patch | Alternar se o arquivo está incluído no patch personalizado. Veja https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Alternar todos os arquivos | Adicionar/remover todos os arquivos de commit para atualização personalizada. Consulte https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Insira o arquivo / Alternar diretório recolhido | Se um arquivo estiver selecionado, insira o arquivo para que você possa adicionar/remover linhas individuais no patch personalizado. Se um diretório for selecionado, ative o diretório. |
| `` ` `` | Alternar exibição de árvore de arquivo | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Recolher todos os arquivos | Recolher todos os diretórios na árvore de arquivos |
| `` = `` | Expandir todos os arquivos | Expandir todos os diretórios na árvore do arquivo |
| `` 0 `` | Focus main view | |
| `` / `` | Search the current view by text | |
| `` 0 `` | Focar visualização principal | |
| `` / `` | Filtrar a visualização atual por texto | |
| `` s `` | Squash | Squash o commit selecionado no commit abaixo dele. A mensagem do commit selecionado será anexada ao commit abaixo dele. |
| `` f `` | Fixup | Faça o commit selecionado no commit abaixo dele. Semelhante para o squash, mas a mensagem do commit selecionado será descartada. |
| `` f `` | Corrigir | Faça o commit selecionado no commit abaixo dele. Semelhante para o squash, mas a mensagem do commit selecionado será descartada. |
| `` c `` | Configurar mensagem de correção | Defina a opção de mensagem para o commit de correção. A opção -C significa usar a mensagem deste commit em vez da mensagem do commit alvo. |
| `` r `` | Reword | Repetir a mensagem de submissão selecionada. |
| `` R `` | Republicar com o editor | |
| `` d `` | Descartar | Solte o commit selecionado. Isso irá remover o commit do branch através de uma rebase. Se o commit faz com que as alterações em commits posteriores dependem, você pode precisar resolver conflitos de merge. |
@@ -170,79 +173,80 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` p `` | Escolher | Marque o commit selecionado para ser escolhido (quando meados da base). Isso significa que o commit será mantido ao continuar o rebase. |
| `` F `` | Criar commit de correção | Crie o commit 'correção!' para o commit selecionado. Mais tarde, você pode pressionar `S` neste mesmo commit para aplicar todas os commits de correção acima. |
| `` S `` | Aplicar commits de correções | Aplicar Squash all 'correção!', seja acima do commit selecionado, ou tudo no branch atual (autosquash). |
| `` <c-j> `` | Mover commit um para baixo | |
| `` <c-k> `` | Mover o commit um para cima | |
| `` <ctrl+j>, <alt+down> `` | Mover commit um para baixo | |
| `` <ctrl+k>, <alt+up> `` | Mover o commit um para cima | |
| `` V `` | Colar (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Modificar | Alterar o commit com mudanças em sted. Se o commit selecionado for o commit HEAD, ele executará o `git commit --amend`. Caso contrário, o compromisso será alterado por meio de uma base de apoio. |
| `` a `` | Alterar atributo de commit | Definir/Redefinir autor de submissão ou co-autor definido. |
| `` t `` | Reverter | Crie um commit reverter para o commit selecionado, que aplica as alterações do commit selecionado em reverso. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` T `` | Etiquetar commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <ctrl+l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Verificar | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` o `` | Abrir commit no navegador | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` g `` | Restaurar | Ver opções de redefinição (soft/mixed/hard) para redefinir para o item selecionado. |
| `` C `` | Copiar (cherry-pick) | Marcar commit como copiado. Então, dentro da visualização local de commits, você pode pressionar `V` para colar (cherry-pick) o(s) commit(s) copiado(s) em seu branch de check-out. A qualquer momento você pode pressionar `<esc>` para cancelar a seleção. |
| `` d `` | Descartar | Quando a mudança não desejada for selecionada, descarte a mudança usando `git reset`. Quando a mudança em fase é selecionada, despare a mudança. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
@@ -253,59 +257,68 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` c `` | Commit | Submeter mudanças em staging |
| `` w `` | Fazer commit de alterações sem pré-commit | |
| `` C `` | Enviar alteração usando um editor Git | |
| `` <c-f> `` | Encontrar commit da base para consertar | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Search the current view by text | |
| `` <ctrl+f> `` | Encontrar commit da base para corrigir | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Pesquisar na visualização atual por texto | |
## Painel de confirmação
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | Confirmar | |
| `` <esc> `` | Fechar/Cancelar | |
| `` <ctrl+o> `` | Copy to clipboard | |
## Painel principal (mesclagem)
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | Escolha o local | |
| `` b `` | Pegar todos os pedaços | |
| `` <up> `` | Trecho anterior | |
| `` <down> `` | Próximo trecho | |
| `` <left> `` | Conflito anterior | |
| `` <right> `` | Próximo conflito | |
| `` b `` | Pick both hunks | |
| `` <up>, k `` | Trecho anterior | |
| `` <down>, j `` | Próximo trecho | |
| `` <left>, h `` | Conflito anterior | |
| `` <right>, l `` | Próximo conflito | |
| `` z `` | Desfazer | Desfazer resolução de conflitos de última mesclagem. |
| `` e `` | Editar arquivo | Abrir arquivo no editor externo. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` M `` | Abrir ferramenta de merge externa | Execute `git mergetool`. |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` <esc> `` | Retornar ao painel de arquivos | |
## Painel principal (patch build)
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | Ir para o local anterior | |
| `` <right> `` | Ir para o próximo trecho | |
| `` <left>, h `` | Ir para o local anterior | |
| `` <right>, l `` | Ir para o próximo trecho | |
| `` v `` | Toggle range select | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Copy selected text to clipboard | |
| `` a `` | Toggle hunk selection | Ativa/desativa modo linha por linha vs. modo de seleção por partes. |
| `` <ctrl+o> `` | Copiar texto selecionado para área de transferência | |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` e `` | Editar arquivo | Abrir arquivo no editor externo. |
| `` <space> `` | Alternar linhas no caminho | |
| `` d `` | Remover linhas do commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Sair do construtor de patch personalizado | |
| `` / `` | Search the current view by text | |
| `` / `` | Pesquisar na visualização atual por texto | |
| `` <space> `` | Verificar | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` o `` | Abrir commit no navegador | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` g `` | Restaurar | Ver opções de redefinição (soft/mixed/hard) para redefinir para o item selecionado. |
| `` C `` | Copiar (cherry-pick) | Marcar commit como copiado. Então, dentro da visualização local de commits, você pode pressionar `V` para colar (cherry-pick) o(s) commit(s) copiado(s) em seu branch de check-out. A qualquer momento você pode pressionar `<esc>` para cancelar a seleção. |
| `` / `` | Filtrar a visualização atual por texto | |
## Remotes
@@ -316,7 +329,8 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` d `` | Remover | Remover o controle remoto. Quaisquer ramificações locais de rastreamento de um ramo remoto do controle não serão afetadas. |
| `` e `` | Editar | Edit the selected remote's name or URL. |
| `` f `` | Buscar | Fetch updates from the remote repository. This retrieves new commits and branches without merging them into your local branches. |
| `` / `` | Filter the current view by text | |
| `` F `` | Add fork remote | Quickly add a fork remote by replacing the owner in the origin URL and optionally check out a branch from new remote. |
| `` / `` | Filtrar a visualização atual por texto | |
## Secundário
@@ -324,7 +338,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` <tab> `` | Mudar de visão | Alternar para outra visão (staged/não processadas alterações). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | Search the current view by text | |
| `` / `` | Pesquisar na visualização atual por texto | |
## Stash
@@ -334,56 +348,56 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Pop | Aplique a entrada de stash no seu diretório de trabalho e remova a entrada de stash. |
| `` d `` | Descartar | Remova a entrada do stash da lista de armazenamento. |
| `` n `` | Nova branch | Criar um novo ramo a partir da entrada de lixo selecionada. Isso funciona verificando o commit do qual a entrada de lixo foi criada, criar um novo branch a partir desse commit e, em seguida, aplicar a entrada de lixo ao novo branch como um commit adicional. |
| `` r `` | Renomear o stasj | |
| `` 0 `` | Focus main view | |
| `` w `` | Nova árvore de trabalho | |
| `` r `` | Renomear o stash | |
| `` 0 `` | Focar visualização principal | |
| `` <enter> `` | Ver arquivos | |
| `` w `` | View worktree options | |
| `` / `` | Filter the current view by text | |
| `` / `` | Filtrar a visualização atual por texto | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Abrir o ficheiro de config | Abrir arquivo no aplicativo padrão. |
| `` e `` | Editar arquivo de configuração | Abrir arquivo no editor externo. |
| `` u `` | Verificar atualização | |
| `` <enter> `` | Mudar para um repositório recente | |
| `` a `` | Mostrar/ciclo todos os logs de filiais | |
| `` 0 `` | Focus main view | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Verificar | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` o `` | Abrir commit no navegador | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` g `` | Restaurar | Ver opções de redefinição (soft/mixed/hard) para redefinir para o item selecionado. |
| `` C `` | Copiar (cherry-pick) | Marcar commit como copiado. Então, dentro da visualização local de commits, você pode pressionar `V` para colar (cherry-pick) o(s) commit(s) copiado(s) em seu branch de check-out. A qualquer momento você pode pressionar `<esc>` para cancelar a seleção. |
| `` / `` | Pesquisar na visualização atual por texto | |
## Submodules
## Submódulos
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy submodule name to clipboard | |
| `` <ctrl+o> `` | Copiar o nome do submódulo para área de transferência | |
| `` <enter> `` | Enter | Enter submodule. After entering the submodule, you can press `<esc>` to escape back to the parent repo. |
| `` d `` | Remover | Remove the selected submodule and its corresponding directory. |
| `` u `` | Update | Update selected submodule. |
| `` n `` | New submodule | |
| `` e `` | Update submodule URL | |
| `` i `` | Initialize | Initialize the selected submodule to prepare for fetching. You probably want to follow this up by invoking the 'update' action to fetch the submodule. |
| `` d `` | Remover | Remova o submódulo selecionado e o diretório correspondente. |
| `` i `` | Inicializar | Initialize the selected submodule to prepare for fetching. You probably want to follow this up by invoking the 'update' action to fetch the submodule. |
| `` b `` | View bulk submodule options | |
| `` / `` | Filter the current view by text | |
| `` / `` | Filtrar a visualização atual por texto | |
## Sumário do commit
@@ -392,12 +406,12 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <enter> `` | Confirmar | |
| `` <esc> `` | Fechar | |
## Worktrees
## Árvores de trabalho
| Key | Action | Info |
|-----|--------|-------------|
| `` n `` | New worktree | |
| `` <space> `` | Switch | Switch to the selected worktree. |
| `` n `` | Nova árvore de trabalho | |
| `` <space> `` | Switch | Mudar para a árvore de trabalho selecionada. |
| `` o `` | Abrir no editor | |
| `` d `` | Remover | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
| `` / `` | Filter the current view by text | |
| `` / `` | Filtrar a visualização atual por texto | |
| `` @ `` | Открыть меню журнала команд | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Отправить изменения | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | Получить и слить изменения | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
@@ -19,20 +17,23 @@ _Связки клавиш_
| `` } `` | Увеличить размер контекста, отображаемого вокруг изменений в просмотрщике сравнении | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Уменьшите размер контекста, отображаемого вокруг изменений в просмотрщике сравнении | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Просмотреть параметры слияния/перебазирования | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | Обновить | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | Следующий режим экрана (нормальный/полуэкранный/полноэкранный) | |
| `` _ `` | Предыдущий режим экрана | |
| `` ? `` | Открыть меню | |
| `` <c-s> `` | Просмотреть параметры фильтрации по пути | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | Открыть меню сравнении | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | Открыть меню сравнении | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | Выйти | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` <esc> `` | Отменить | |
| `` <c-w> `` | Переключить отображение изменении пробелов в просмотрщике сравнении | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` ? `` | Открыть меню | |
| `` <ctrl+s> `` | Просмотреть параметры фильтрации по пути | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Открыть меню сравнении | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Выйти | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Переключить отображение изменении пробелов в просмотрщике сравнении | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Редактировать файл конфигурации | Open file in external editor. |
| `` z `` | Отменить (через reflog) (экспериментальный) | Журнал ссылок (reflog) будет использоваться для определения того, какую команду git запустить, чтобы отменить последнюю команду git. Сюда не входят изменения в рабочем дереве; учитываются только коммиты. |
| `` <c-z> `` | Повторить (через reflog) (экспериментальный) | Журнал ссылок (reflog) будет использоваться для определения того, какую команду git нужно запустить, чтобы повторить последнюю команду git. Сюда не входят изменения в рабочем дереве; учитываются только коммиты. |
| `` Z `` | Повторить (через reflog) (экспериментальный) | Журнал ссылок (reflog) будет использоваться для определения того, какую команду git нужно запустить, чтобы повторить последнюю команду git. Сюда не входят изменения в рабочем дереве; учитываются только коммиты. |
## Навигация по панели списка
@@ -40,17 +41,24 @@ _Связки клавиш_
|-----|--------|-------------|
| `` , `` | Предыдущая страница | |
| `` . `` | Следующая страница | |
| `` < (<home>) `` | Пролистать наверх | |
| `` > (<end>) `` | Прокрутить вниз | |
| `` <, <home> `` | Пролистать наверх | |
| `` >, <end> `` | Прокрутить вниз | |
| `` v `` | Переключить выборку перетаскивания | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Найти | |
| `` H `` | Прокрутить влево | |
| `` L `` | Прокрутить вправо | |
| `` ] `` | Следующая вкладка | |
| `` [ `` | Предыдущая вкладка | |
## Input prompt
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | Подтвердить | |
| `` <esc> `` | Закрыть/отменить | |
## Worktrees
| Key | Action | Info |
@@ -73,11 +81,11 @@ _Связки клавиш_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | Выбрать предыдущую часть | |
| `` <right> `` | Выбрать следующую часть | |
| `` <left>, h `` | Выбрать предыдущую часть | |
| `` <right>, l `` | Выбрать следующую часть | |
| `` v `` | Переключить выборку перетаскивания | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Скопировать выделенный текст в буфер обмена | |
| `` <ctrl+o> `` | Скопировать выделенный текст в буфер обмена | |
| `` <space> `` | Переключить индекс | Переключить строку в проиндексированные / непроиндексированные |
| `` d `` | Отменить изменение (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | Открыть файл | Open file in default application. |
@@ -88,15 +96,15 @@ _Связки клавиш_
| `` c `` | Сохранить изменения | Commit staged changes. |
| `` w `` | Закоммитить изменения без предварительного хука коммита | |
| `` C `` | Сохранить изменения с помощью редактора git | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Выйти из сборщика пользовательских патчей | |
| `` / `` | Найти | |
@@ -136,31 +145,32 @@ _Связки клавиш_
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Скопировать hash коммита в буфер обмена | |
| `` n `` | Создать новую ветку с этого коммита | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` s `` | Объединить коммиты (Squash) | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Объединить несколько коммитов в один отбросив сообщение коммита (Fixup) | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Перефразировать коммит | Reword the selected commit's message. |
| `` R `` | Переписать коммит с помощью редактора | |
| `` d `` | Удалить коммит | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
@@ -169,41 +179,44 @@ _Связки клавиш_
| `` p `` | Pick | Выбрать коммит (в середине перебазирования) |
| `` F `` | Создать fixup коммит | Создать fixup коммит для этого коммита |
| `` S `` | Apply fixup commits | Объединить все 'fixup!' коммиты выше в выбранный коммит (автосохранение) |
| `` <c-j> `` | Переместить коммит вниз на один | |
| `` <c-k> `` | Переместить коммит вверх на один | |
| `` <ctrl+j>, <alt+down> `` | Переместить коммит вниз на один | |
| `` <ctrl+k>, <alt+up> `` | Переместить коммит вверх на один | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Править последний коммит с проиндексированными изменениями |
| `` a `` | Установить/убрать автора коммита | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Пометить коммит тегом | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | Открыть меню журнала | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <ctrl+l> `` | Открыть меню журнала | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Переключить | Checkout the selected commit as a detached HEAD. |
| `` n `` | Создать новую ветку с этого коммита | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` o `` | Создать запрос на принятие изменений | |
| `` O `` | Создать параметры запроса принятие изменений | |
| `` <c-y> `` | Скопировать URL запроса на принятие изменений в буфер обмена | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | Скопировать URL запроса на принятие изменений в буфер обмена | |
| `` c `` | Переключить по названию | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | Принудительное переключение | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
@@ -216,10 +229,9 @@ _Связки клавиш_
| `` g `` | Просмотреть параметры сброса | |
| `` R `` | Переименовать ветку | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` n `` | Создать новую ветку с этого коммита | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <space> `` | Переключить файлы включённые в патч | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Переключить все файлы, включённые в патч | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Введите файл, чтобы добавить выбранные строки в патч (или свернуть каталог переключения) | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
@@ -296,52 +309,52 @@ _Связки клавиш_
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Найти | |
| `` / `` | Filter the current view by text | |
## Статус
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Открыть файл конфигурации | Open file in default application. |
| `` e `` | Редактировать файл конфигурации | Open file in external editor. |
| `` u `` | Проверить обновления | |
| `` <enter> `` | Переключиться на последний репозиторий | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` 0 `` | Focus main view | |
## Теги
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy tag to clipboard | |
| `` <ctrl+o> `` | Copy tag to clipboard | |
| `` <space> `` | Переключить | Checkout the selected tag as a detached HEAD. |
| `` n `` | Создать тег | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
| `` w `` | New worktree | |
| `` d `` | Delete | View delete options for local/remote tag. |
| `` P `` | Отправить тег | Push the selected tag to a remote. You'll be prompted to select a remote. |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` <c-o> `` | Скопировать название ветки в буфер обмена | |
| `` <ctrl+o> `` | Скопировать название ветки в буфер обмена | |
| `` <space> `` | Переключить | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
| `` n `` | Новая ветка | |
| `` w `` | New worktree | |
| `` M `` | Слияние с текущей переключённой веткой | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` r `` | Перебазировать переключённую ветку на эту ветку | Rebase the checked-out branch onto the selected branch. |
| `` d `` | Delete | Delete the remote branch from the remote. |
| `` u `` | Set as upstream | Установить как upstream-ветку переключённую ветку |
| `` s `` | Порядок сортировки | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` c `` | Сохранить изменения | Commit staged changes. |
| `` w `` | Закоммитить изменения без предварительного хука коммита | |
| `` A `` | Правка последнего коммита | |
| `` C `` | Сохранить изменения с помощью редактора git | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | Открыть файл | Open file in default application. |
| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | Переключить вид дерева файлов | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` f `` | Получить изменения | Fetch changes from remote. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Найти | |
| `` / `` | Filter the current view by text | |
## Хранилище
@@ -396,8 +410,8 @@ _Связки клавиш_
| `` g `` | Применить припрятанные изменения и тут же удалить их из хранилища | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Удалить припрятанные изменения из хранилища | Remove the stash entry from the stash list. |
| `` n `` | Новая ветка | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` P `` | 推送 | 推送当前分支到它的上游。如果上游未配置，您可以在弹窗中配置上游分支。 |
| `` p `` | 拉取 | 从当前分支的远程分支获取改动。如果上游未配置，您可以在弹窗中配置上游分支。 |
| `` ) `` | 提高重命名相似度阈值 | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | 降低重命名相似度阈值 | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | 扩大差异视图中显示的上下文范围 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | 缩小差异视图中显示的上下文范围 | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` <esc> `` | 取消 | |
| `` <c-w> `` | 切换是否在差异视图中显示空白字符差异 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` y `` | 复制提交属性到剪贴板 | 复制提交属性到剪贴板(如hash、URL、diff、消息、作者)。 |
| `` o `` | 在浏览器中打开提交 | |
| `` n `` | 从提交创建新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` y `` | 复制提交属性到剪贴板 | 复制提交属性到剪贴板(如hash、URL、diff、消息、作者)。 |
| `` o `` | 在浏览器中打开提交 | |
| `` n `` | 从提交创建新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | 移动提交至新分支 | 创建一个新分支，并将当前分支未推送的提交移动到该分支。如果您打算开始新工作但忘记先创建新分支，这会很有用。<br><br>请注意，此操作忽略选择，新分支总是从主分支创建或堆叠在当前分支之上（您可以选择哪种方式）。 |
| `` y `` | 复制提交属性到剪贴板 | 复制提交属性到剪贴板(如hash、URL、diff、消息、作者)。 |
| `` o `` | 在浏览器中打开提交 | |
| `` n `` | 从提交创建新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | 移动提交至新分支 | 创建一个新分支，并将当前分支未推送的提交移动到该分支。如果您打算开始新工作但忘记先创建新分支，这会很有用。<br><br>请注意，此操作忽略选择，新分支总是从主分支创建或堆叠在当前分支之上（您可以选择哪种方式）。 |
| `` ` `` | 切换文件树视图 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` ` `` | 切换文件树视图 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | 移动提交至新分支 | 创建一个新分支，并将当前分支未推送的提交移动到该分支。如果您打算开始新工作但忘记先创建新分支，这会很有用。<br><br>请注意，此操作忽略选择，新分支总是从主分支创建或堆叠在当前分支之上（您可以选择哪种方式）。 |
| `` w `` | 新建工作树 | |
| `` o `` | 创建拉取请求 | |
| `` O `` | 创建拉取请求选项 | |
| `` <c-y> `` | 复制拉取请求 URL 到剪贴板 | |
| `` G `` | 在浏览器中打开拉取请求 | |
| `` <ctrl+y> `` | 复制拉取请求 URL 到剪贴板 | |
| `` c `` | 按名称检出 | 按名称检出。在输入框中，您可以输入'-' 来切换到最后一个分支。 |
| `` - `` | Checkout previous branch | |
| `` - `` | 签出上一个分支 | |
| `` F `` | 强制检出 | 强制检出所选分支。这将在检出所选分支之前放弃工作目录中的所有本地更改。 |
| `` d `` | 删除 | 查看本地/远程分支的删除选项 |
| `` r `` | 变基 | 将检出的分支变基到所选的分支上。 |
| `` M `` | 合并到当前检出的分支 | Merge selected branch into currently checked out branch. |
| `` M `` | 合并到当前检出的分支 | 查看将选中项合并到当前分支的选项(正常合并，压缩合并) |
| `` f `` | 从上游快进此分支 | 将当前分支直接移动到远程追踪分支的最新提交 |
| `` T `` | 创建标签 | |
| `` s `` | 排序 | |
| `` g `` | 查看重置选项 | |
| `` R `` | 重命名分支 | |
| `` u `` | 查看上游选项 | 查看与分支上游相关的选项，例如设置/取消设置上游和重置为上游。 |
| `` <c-t> `` | 使用外部差异比较工具(git difftool) | |
| `` 0 `` | Focus main view | |
| `` <ctrl+t> `` | 使用外部差异比较工具(git difftool) | |
| `` 0 `` | 聚焦主视图 | |
| `` <enter> `` | 查看提交 | |
| `` w `` | 查看工作区选项 | |
| `` / `` | 通过文本过滤当前视图 | |
## 构建补丁中
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | 选择上一个区块 | |
| `` <right> `` | 选择下一个区块 | |
| `` <left>, h `` | 选择上一个区块 | |
| `` <right>, l `` | 选择下一个区块 | |
| `` v `` | 切换拖动选择 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 复制选中文本到剪贴板 | |
| `` a `` | 切换代码块选择 | 切换逐行选择与代码块选择模式。 |
| `` <ctrl+o> `` | 复制选中文本到剪贴板 | |
| `` o `` | 打开文件 | 使用默认程序打开该文件 |
| `` e `` | 编辑文件 | 使用外部编辑器打开文件 |
| `` <space> `` | 添加/移除 行到补丁 | |
| `` d `` | 从提交中移除行 | 从本次提交中移除所选行。此操作会在后台运行交互式变基，因此如果后续提交也修改了这些行，您可能会遇到合并冲突。 |
| `` } `` | 增加差異檢視中顯示變更周圍上下文的大小 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | 減小差異檢視中顯示變更周圍上下文的大小 | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` <c-p> `` | 檢視自訂補丁選項 | |
| `` <ctrl+p> `` | 檢視自訂補丁選項 | |
| `` m `` | 查看合併/變基選項 | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | 重新整理 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | 下一個螢幕模式（常規/半螢幕/全螢幕） | |
| `` _ `` | 上一個螢幕模式 | |
| `` ? `` | 開啟選單 | |
| `` <c-s> `` | 檢視篩選路徑選項 | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | 結束 | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers. |
| `` \ `` | Cycle pagers (reverse) | Choose the previous pager in the list of configured pagers. |
| `` <esc> `` | 取消 | |
| `` <c-w> `` | 切換是否在差異檢視中顯示空格變更 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` ? `` | 開啟選單 | |
| `` <ctrl+s> `` | 檢視篩選路徑選項 | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | 結束 | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | 切換是否在差異檢視中顯示空格變更 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 複製所選文本至剪貼簿 | |
| `` <ctrl+o> `` | 複製所選文本至剪貼簿 | |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` e `` | 編輯檔案 | 使用外部編輯器開啟 |
| `` <space> `` | 向 (或從) 補丁中添加/刪除行 | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` z `` | 復原 | Undo last merge conflict resolution. |
| `` e `` | 編輯檔案 | 使用外部編輯器開啟 |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` M `` | 開啟外部合併工具 | 執行 `git mergetool`。 |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` <esc> `` | 返回檔案面板 | |
## 主面板（預存）
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | 選擇上一段 | |
| `` <right> `` | 選擇下一段 | |
| `` <left>, h `` | 選擇上一段 | |
| `` <right>, l `` | 選擇下一段 | |
| `` v `` | 切換拖曳選擇 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 複製所選文本至剪貼簿 | |
| `` <ctrl+o> `` | 複製所選文本至剪貼簿 | |
| `` <space> `` | 切換預存 | 切換現有行的狀態 (已預存/未預存) |
| `` d `` | 刪除變更 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <c-r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <c-t> `` | 開啟外部差異工具 (git difftool) | |
| `` <ctrl+r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` * `` | Select commits of current branch | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | 檢視所選項目的檔案 | |
| `` w `` | 檢視工作目錄選項 | |
| `` / `` | 搜尋 | |
## 子模組
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | 複製子模組名稱到剪貼簿 | |
| `` <ctrl+o> `` | 複製子模組名稱到剪貼簿 | |
| `` <enter> `` | Enter | 進入子模組 |
| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
| `` s `` | 壓縮 (Squash) | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | 修復 (Fixup) | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | 改寫提交 | 改寫選中的提交訊息 |
| `` R `` | 使用編輯器改寫提交 | |
| `` d `` | 刪除提交 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` B `` | 為了變基已標注提交為基準提交 | 請為了下一次變基選擇一項基準提交；此將執行 `git rebase --onto`。 |
| `` A `` | 修改 | 使用已預存的更改修正提交 |
| `` a `` | 設定/重設提交作者 | Set/Reset commit author or set co-author. |
| `` t `` | 還原 | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | 打標籤到提交 | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | 開啟記錄選單 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <ctrl+l> `` | 開啟記錄選單 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` d `` | Remove | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` d `` | 捨棄 | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` e `` | 編輯 | 使用外部編輯器開啟 |
| `` <c-t> `` | 開啟外部差異工具 (git difftool) | |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` <space> `` | 切換檔案是否包含在補丁中 | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | 切換所有檔案是否包含在補丁中 | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | 輸入檔案以將選定的行添加至補丁（或切換目錄折疊） | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
| `` g `` | 還原 | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | 捨棄 | Remove the stash entry from the stash list. |
| `` n `` | 新分支 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <c-r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <c-t> `` | 開啟外部差異工具 (git difftool) | |
| `` <ctrl+r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` * `` | Select commits of current branch | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | 檢視提交 | |
| `` w `` | 檢視工作目錄選項 | |
| `` / `` | 搜尋 | |
## 本地分支
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | 複製分支名稱到剪貼簿 | |
| `` <ctrl+o> `` | 複製分支名稱到剪貼簿 | |
| `` i `` | 顯示 git-flow 選項 | |
| `` <space> `` | 檢出 | 檢出選定的項目。 |
| `` n `` | 新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` o `` | 建立拉取請求 | |
| `` O `` | 建立拉取請求選項 | |
| `` <c-y> `` | 複製拉取請求的 URL 到剪貼板 | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | 複製拉取請求的 URL 到剪貼板 | |
| `` c `` | 根據名稱檢出 | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | 強制檢出 | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` D `` | 重設 | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | 顯示檔案樹狀視圖 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` <c-t> `` | 開啟外部差異工具 (git difftool) | |
| `` M `` | 開啟外部合併工具 | 執行 `git mergetool`。 |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` f `` | 擷取 | 同步遠端異動 |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
// the price of having a convenient interface where we can say .New(...).Run() is that our builder now depends on our runner, so when we want to wrap the default builder/runner in new functionality we need to jump through some hoops. We could avoid the use of a decorator function here by just exporting the runner field on the default builder but that would be misleading because we don't want anybody using that to run commands (i.e. we want there to be a single API used across the codebase)
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Stefan HallerandClaude Fable 5
dependabot[bot]
Henry Maddocks
Antoine Gaudreau Simard
stk
majiayu000
Bradly Chang
Ubuntu
Martin T.
Jesse DuffieldandStefan Haller
github-actions[bot]
dagecko
phanium
Matthijs Kooijman
rohan436
John Yeates
Miika Tuominen
blakemckeanyandStefan Haller
Ruud Kamphuis
Zak Siddiqui
04cb
cobyfrombrooklyn-bot
Daniel Wennberg
Owen Zimmerman
baiyei_dk
cadamsdev
Dawid Pietrykowski
Padraic Slattery
mricherzhagen
Karl Wikström
Yadi Abdalhalim
Peter Cardenas
Mikhail Akimov
riyueguang
boqishan
Karol Zwolak
Mad Scientist
rlkandela
Raphaele Salvatore LicciardoandStefan Haller
hrzlgnm
Anton Bobov
Brandon
kyu08
Karen Grigoryan
Krystof Gartner
doprz
Marco Zingoni
Torben Koch
Henning Lorenzen
Ricardo Fernández Serrata
cowboy8625andStefan Haller
🚀 Niklas Arens
Marek Sierociński
Dejan Lekić