A lazygit instance that has been open for a while sometimes stops
showing pull requests, and keeps not showing them until you quit and
restart it. The cause is that we resolve the GitHub token once per
process and then keep using that stale answer.
We get the token from go-gh, which reads gh's `hosts.yml` on the first
call and caches it for the lifetime of the process. gh rewrites that
file whenever the active account changes, and keeps the active account's
token either in the file or in the system keyring, depending on the
account. Once the file changes under us, our snapshot no longer
describes reality: either we keep sending a token for an account that is
no longer active, or — if the snapshot was taken while a keyring-backed
account was active — we find no token at all, drop the remote, and show
no pull requests. Nothing is reported to the user, so it looks like PR
fetching is simply broken.
Switching accounts with `gh auth switch` is the easiest way to trigger
this, but it isn't limited to multi-account setups: a single account
hits the same thing whenever its token is rotated, or moved between the
keyring and `hosts.yml` by a fresh `gh auth login`.
So ask gh itself for the token on every refresh, with `gh auth token
--hostname <host>`, which resolves it afresh from whichever of the
environment, the keyring, or the config file currently holds it. Not
passing `--secure-storage` (which go-gh does internally) also means it
stops mattering which of the two the active account uses. go-gh's lookup
stays as a fallback for setups without the gh binary, where it still
picks up `GH_TOKEN` and friends; when gh is present it checks those
variables itself.
To reproduce on master, with two gh accounts, one with its token in the
keyring and one in `hosts.yml`: start lazygit while the keyring-backed
account is active, then run `gh auth switch` to the other one. The pull
request information disappears on the next refresh and doesn't come back
until lazygit is restarted. Running `gh auth token --secure-storage
--hostname github.com` by hand at that point prints `no oauth token
found for github.com`.
go-gh reads gh's config file once per process and answers from that
snapshot for the rest of the process's life. gh rewrites the file
whenever the active account changes, and stores the active account's
token either in it or in the system keyring, depending on the account.
A lazygit that has been running for a while therefore consults a
snapshot that no longer describes reality: it either keeps using a
token for an account that is no longer active, or, when the snapshot
was taken while a keyring-backed account was active, finds no token at
all and silently stops showing pull requests until it is restarted.
Asking gh resolves the token afresh on every refresh, from whichever of
the environment, the keyring or the config file currently holds it.
go-gh's lookup stays behind as a fallback for setups without the gh
binary, where it still picks up GH_TOKEN and friends.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When confirmOnQuit is true, quitting would sometimes hang for three
seconds and then print "cannot kill child process". Concretely, this
happened whenever the Files panel was focused but there were no changed
files (the main view shows "No changed files").
This is a regression in 0.64.0, it worked before.
Fixes#5918.
Quitting with confirmOnQuit set hung for three seconds and printed
"cannot kill child process", but only with a clean working tree. Closing
the confirmation pops the context before running its handler, so the
files panel is re-focused and re-renders the main view, and only then
does the handler return ErrQuit. With no changed files that render is a
string task, whose whole body is one hop to the UI thread — a hop that
is never served, because the handler's ErrQuit has meanwhile brought the
main loop down. The task can't finish, so the ViewBufferManager.Close
that follows waits for it until it times out. (With changed files it's a
command task instead, and every blocking point in one of those selects
on the stop channel, so Close gets through.)
A wait for the UI thread now ends when the loop does. That also covers
the command task's own hops, which are stopped only in between them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Nothing dequeues user events once MainLoop has returned, so a worker
blocked in OnUIThreadAndWait is blocked for good. The assertion records
that; the next commit makes the wait give up instead.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Right now the function always returns nil, but this will change later in
this branch, so handle errors properly. Without that, the first capture
that assigns env.git would not run, leave env.git nil, and subsequent
code would crash.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every caller passes an f that unconditionally returns nil, so f's error
return has never carried anything: the value is dead weight, and it
occupies the one channel the wait itself needs to report that it couldn't
run f at all. Drop it, so that the error the wait returns can only ever
mean that.
Work that can fail hands its error back through a captured variable, the
way the background fetch already hands back four values, which keeps the
two outcomes distinguishable at a call site that has both.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
If the `conflict-marker-size` git attribute is used to set the marker
size to a non-default value (!= 7), lazygit's handling of conflicted
files was totally broken. Stopping at a commit with conflicts in a
rebase would show the `UU` files for a moment, and then, a few seconds
later, would stage all conflicted files and offer to continue the rebase
(with the conflicts baked into the resulting commits if you confirmed).
Even if you cancelled the continue prompt, it wasn't possible to use
git's conflict panel to resolve the conflicts; it would only show the
regular diff for those files, not its conflicts editor.
Fix this by querying the `conflict-marker-size` git attribute for all
conflicting files and use that to match the conflict markers.
Fixes#4367.
Git only writes the space after a marker when there is a label to write
after it, and the label can be empty: `git checkout -m` with the diff3
conflict style, for instance, has no name for the common ancestor, so it
writes a bare "|||||||" line.
Ask git for the attribute of every conflicted file whenever we load the
file status, so that we recognize the markers it actually wrote. Files
that are set up this way are precisely the ones whose regular content
tends to contain marker-looking lines, so matching a run of at least
seven characters instead is not an option: we'd take the file's own
content for markers and then never consider its conflicts resolved.
One `git check-attr` call covers all conflicted files at once; asking per
file would take seconds when hundreds of files are conflicted, and it
would hurt worst on Windows, where spawning a process is expensive.
Because the lookup rides along with the file status, it costs nothing
when there are no conflicts, and editing .gitattributes during a merge
takes effect on the next refresh.
When a file's conflict markers aren't seven characters long we don't
recognize them at all. Two things go wrong: we consider the file's
conflicts resolved, so we stage it and offer to continue the merge a
moment after stopping at it; and pressing enter on it shows its diff
instead of the merge conflicts view, leaving no way to resolve it in
lazygit.
Git doesn't always write conflict markers of seven characters: the
conflict-marker-size gitattribute overrides that per file, and it is set
for good reasons — for file types whose regular content tends to contain
marker-looking lines, such as documentation about merging, or test
scripts. We hard-code seven characters everywhere we look for markers,
so none of that works.
Prepare for honoring the attribute by threading the marker size through
everything that recognizes a marker, carried on the file model. Nothing
fills it in yet, so we still use git's default size of seven everywhere,
and matching is unchanged: a marker consists of exactly that many marker
characters, and all but the "=======" one are followed by a space and a
label.
This fixes a regression in 0.64.0: before that version, creating or
popping a stash would happen synchronously on the UI thread (including
the refresh), blocking the UI until everything changed, including the
panel focus. Blocking the UI was not nice of course, but at least the UI
update was clean. With 0.64.0 this changed to a background refresh, so
that the update to the two panels and the focus change all happened out
of sync, which looks rather ugly. Fix this by using Refresh's mechanism
to batch UI updates, and switch the panel focus in the Refresh's Then so
that it updates at the same time.
While we're at it, use a waiting status spinner for these operations;
they are usually fast when only few files are involved, but when
stashing a large number of files in a larger repo it can be noticeable,
and it looks ugly if the confirmation prompt stays on the screen while
it is running.
Creating and applying a stash both touch every changed file, so in a
large repo they can take long enough to be noticeable — and running them
on the UI thread meant the confirmation popup stayed on screen, frozen,
for the whole operation. Run them on a worker instead, with a spinner,
and keep blocking input for their duration so that the type-ahead
guarantee the refresh used to provide still holds.
Dropping stays on the UI thread: it only rewrites the stash reflog, so
it's fast no matter how big the stashes are.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Collapsing the range before kicking off the refresh paints the new
selection against the list as it was before the drop, so for a frame the
entries that were just dropped are still on screen (and, with
gui.shrinkSidePanelsToContent, the panel is still at its old size).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Pushing the files context right after kicking off the refresh moves the
focus (and, with gui.shrinkSidePanelsToContent, resizes the panels) a
frame before the refreshed stash and files lists arrive. Doing it from
Then puts it in the same frame as the data it belongs to.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Stashing and popping change both the stash list and the files list.
With each scope updating the UI as soon as its own refresh is done, the
two panels visibly change at different times; with
gui.shrinkSidePanelsToContent that also means their sizes change at
different times than their contents.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Lazygit assumes a repo can be found again from its working directory: it
chdirs there and lets git rediscover the git dir from `<worktree>/.git`.
That holds for an ordinary repo and breaks for every setup where the git
dir lives somewhere else, which is where these bugs come from. Opening
such a repo worked at all only when `--git-dir` happened to leave
`GIT_DIR` in the environment for every command to inherit — which is
also why entering a submodule, which has to clear it, broke the way back
out.
Three reported problems:
- **`core.worktree` (#5895).** A repo whose work tree is elsewhere
panicked on startup with `fatal: not a git repository`: we chdir'd into
a work tree with no `.git` in it and every command after that was lost.
We now work out at startup whether git can find the repo from its work
tree, and when it can't we put `GIT_DIR`/`GIT_WORK_TREE` on every
command the repo's command builder produces — as well as in the process
environment, for subprocesses that don't come through the builder.
Nothing is set for the repos git can find on its own, which is nearly
all of them.
- **Escaping a submodule of a dotfile repo (#1118).** The repo-path
stack we push the superproject onto only held its path, and for a repo
opened with `--git-dir`/`--work-tree` the path leads nowhere. Escaping
failed with `not a git repository`, or, if some unrelated repo happened
to lie above the work tree, quietly switched to that one instead. The
stack now carries the environment as well, taken from the repo paths
rather than from the process env, so it also covers a repo whose
location lazygit worked out itself.
- **Opening a directory that holds a bare repo (#5469, #5681).** `git
rev-parse --show-toplevel` is fatal when there's no work tree, so we
never got an answer at all for a bare repo: `IsBareRepo()` could never
come out true, and lazygit either died with a stack trace or decided we
weren't in a repository. We now ask again without `--show-toplevel` when
the first query fails, and the existing "open most recent repo?" prompt
does its job.
Some related things that turned up on the way:
- **A submodule no longer looks like a linked worktree.** `git worktree
list` reports the main worktree as the common git dir with a trailing
`/.git` removed, which is not the working tree when the git dir doesn't
live inside it. Comparing that against the working tree path matched
nothing, so inside a submodule the status bar claimed we were in a
linked worktree named after the submodule, the worktrees panel listed it
as not current, and its branch got a "checked out elsewhere" marker.
Worktrees are now identified by their git dir, which names them
unambiguously.
- **Commands aimed at another repo no longer resolve against ours.**
With `GIT_DIR` set, `git -C mysub log -1` reports the *superproject's*
commit, silently. So opening lazygit with `--git-dir`/`--work-tree`
quietly broke resolving submodule conflicts, stashing and resetting a
submodule, and detaching another worktree.
- **Starting lazygit in a repo's `.git` dir opens the repo.** It used to
tell you that you were in a bare repo, which you weren't — the work tree
was one directory up. git's own convention is that a git dir called
`.git` belongs to the directory holding it, so we look there. (A linked
worktree's or a submodule's git dir isn't called `.git`, and nothing we
look at says where their work tree is, so those still get the prompt.)
- **`RepoPath()`** is documented to be the work tree when we're in the
main worktree, but was derived from the git dir's location, which is
only the same thing when the git dir is inside the work tree. This fixes
the repo name shown in the status panel for split setups.
Fixes#1118Fixes#5469Fixes#5681Fixes#5736Fixes#5895
Running lazygit in a .git dir got you told you were in a bare repo,
which you weren't: the worktree was sitting right there, one directory
up. git's own convention is that a git dir called .git belongs to the
directory holding it — that's how `git worktree list` names the main
worktree — so ask that directory, and if it is a worktree, open the repo
we were really being asked about.
The git dirs that aren't called .git keep the answer they had. A linked
worktree's and a submodule's do have a worktree, but nothing we look at
says where, so we would be guessing; a bare repo's has none to find.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Entering a submodule clears GIT_DIR and GIT_WORK_TREE, as it must: they
say where the superproject is. But the stack we push the superproject
onto so that escape brings us back only held its path, and for a repo
opened with --git-dir/--work-tree the path leads nowhere — git can't
find a repo there. Escaping out of a submodule of a dotfile repo failed
with "not a git repository", or, if some unrelated repo happened to lie
above the work tree, quietly switched to that one instead.
Push the environment onto the stack along with the path, taken from the
repo paths rather than from the process env, so that it also covers a
repo we worked the location out for ourselves.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
git finds a repo by looking for a .git in the directory a command runs
in. Lazygit runs its commands in the work tree, so that normally works —
but not when the git dir lives somewhere else entirely, which is what
core.worktree and --work-tree are for. Lazygit chdir'd into such a work
tree and then ran commands that couldn't see any repo from there, so
opening a repo with core.worktree set panicked on startup. It only
worked with --git-dir because that leaves GIT_DIR in the environment for
every command to inherit.
Work out at startup whether git can find the repo from its work tree,
and when it can't, put GIT_DIR and GIT_WORK_TREE on every command the
repo's builder produces. As with the working directory the builder pins
(527124d0e0), these also go into the process env — subprocesses don't
come through the builder — but the commands don't read them from there,
because the process env belongs to whichever repo we have switched to
since.
Working out whether git can find the repo means asking git, rather than
reading the .git file, whose contents can spell the same directory
differently than git does. The extra query is skipped for a repo whose
git dir is simply its .git directory, which is nearly all of them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
GIT_DIR and GIT_WORK_TREE tell git where our repo is, and every command
we run inherits them — including the ones we point at a submodule or
another worktree. git resolves those against our repo instead, and says
nothing about it: with GIT_DIR set, `git -C mysub log -1` reports the
superproject's commit. So opening lazygit with --git-dir/--work-tree
quietly broke resolving submodule conflicts, stashing and resetting a
submodule, and detaching another worktree; the worktree list came back
claiming every worktree shared our git dir.
Drop the two variables from the commands that address another repo.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Reset told git to change directory with -C while runInParentModule does
it by setting the command's working directory, but they were computing
the same directory for the same reason. Use the helper, so that there is
one place that knows what running in a nested submodule's parent means.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Its working directory resolves against the process rather than against
the repo the command builder pins commands to, which is only safe
because nothing but foreground commands come through here.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
git makes `rev-parse --show-toplevel` fatal when there's no work tree,
so asking for it together with everything else meant we never got an
answer at all for a bare repo: GetRepoPaths returned an error, nobody
ever saw IsBareRepo() == true, and lazygit either died with a stack
trace or decided we weren't in a repository. That's what you got for
opening it in a directory holding a bare repo and a .git file pointing
at it, which is a normal way to keep a repo and its worktrees together.
Ask again without --show-toplevel when the first query fails: the other
queries work fine without a work tree, so if they now succeed we know
we're in a bare repo, and the existing prompt offering to open a recent
repo does its job. If they fail too we're not in a repo at all, and the
first error already says so.
--is-bare-repository is gone from the query: a work tree implies
core.bare is false, so it could only ever come back false there, and
what matters to us is whether there is a work tree to show, which is
what we now go by.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
"does not yet support" reads as a promise that it will, but it's quite
likely that it never will.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
onNewRepo also runs when switching repos, and a failure there leaves us
in the repo we came from — with a nil GitCommand, which nothing else is
prepared for. Only assign once we have one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
RepoPath() is meant to be the same as WorktreePath() when we're in the
main worktree, but we derived it from the git dir's location instead.
That is only the same thing when the git dir lives inside the work tree.
With core.worktree, --work-tree, or a .git file pointing at a repo dir
that isn't called .git, it lands on a directory that isn't a worktree at
all, and the repo name we show follows it there.
A worktree that has the repo's common git dir to itself is the main
worktree, so use its path. That subsumes the submodule case, whose git
dir lives under the superproject's .git/modules but is still the
submodule's own common dir; --show-superproject-working-tree is now only
needed for a linked worktree of a submodule.
The existing bare repo test asserted a git output that can't occur (a
work tree and --is-bare-repository=true at once), but the rest of it is
the shape of a repo opened with --git-dir/--work-tree, where the new
repo path is the correct one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When the work tree lives somewhere else entirely — set up with
core.worktree or --work-tree — we're still in the main worktree, so
RepoPath() should be the work tree, as its own doc comment says. Instead
we derive it from the git dir's location, which lands somewhere that
isn't a worktree at all, and the repo name follows it.
The ACTUAL lines are indented as they will be once the EXPECTED ones
replace them, rather than as gofumpt wants them while the comment
markers are still splitting the struct's alignment. That leaves this one
file not gofumpt-clean until the next commit, in exchange for a diff
there that shows only the lines that actually change.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`git worktree list` reports the main worktree as the common git dir with
a trailing "/.git" removed, which equals the working tree only when the
git dir sits inside it. In a submodule, a bare repo, or a repo using
core.worktree it doesn't, so comparing the reported path against the
working tree path matches nothing: no worktree is recognized as current
or as main. Most visibly, inside a submodule lazygit claimed we were in
a linked worktree named after the submodule, and offered to remove that
"worktree".
Comparing git dirs identifies a worktree unambiguously, so use that.
A worktree whose directory is gone has no git dir to compare, and there
we still have nothing better than its path.
The submodule tests were asserting the linked-worktree suffix in the
status view; it is gone now, and the repo name still says which
submodule we're in.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A submodule's git dir doesn't live inside its working tree, and `git
worktree list` reports it by its git dir. Lazygit compares that against
the working tree path, so it recognizes neither the current nor the main
worktree, and the UI ends up claiming we're in a linked worktree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The scenarios describe their repo by its paths but leave the git dirs
empty, which no repo has. Unused for now; the loader is about to want
them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Our minimum required git version is 2.32.0, which is the first version
that does support the GIT_CONFIG_GLOBAL env var, so we don't need the
~/.gitconfig dance any more.
Our minimum required git version is 2.32.0, which is the first version
that does support the GIT_CONFIG_GLOBAL env var, so we don't need the
~/.gitconfig dance any more.
### PR Description
Refresh the Nix flake inputs - see #5882.
Direct input revisions:
- `flake-parts`: `758cf7296b` → `427bf4bd94`
- `nixpkgs`: `c9b6fb7985` → `e72e4f2994`
- `treefmt-nix`: `5eda4ee812` → `d1187f8bc7`
- `systems`: unchanged at `da67096a3b`
- `flake-compat`: unchanged at `ff81ac966b`; its immutable URL metadata
was normalized by the lock refresh
The refresh also updates the transitive `nixpkgs-lib` and
`treefmt-nix/nixpkgs` inputs.
The newer nixpkgs revision deprecates `pkgs.nixfmt-rfc-style` because it
now aliases `pkgs.nixfmt`. Uses the current attribute directly,
preserving
formatter behavior and removing the two evaluation warnings.
### Testing
- `nix flake check`
- `nix develop --ignore-environment -c just format` with a writable
`GOCACHE`
- `nix develop --ignore-environment -c just build` with a writable
`GOCACHE`
- `nix develop --ignore-environment --keep HOME -c just unit-test` with
a writable `GOCACHE`
- `nix develop --ignore-environment --keep HOME -c just lint` with
managed proxy variables and task-local caches
- `nix-shell --run 'just --version'`
- `git diff --check`
### Please check if the PR fulfills these requirements
- [x] Cheatsheets are up-to-date — no integration-test or keybinding
changes
- [x] Code has been formatted
- [x] Tests have been added/updated — no test changes needed; unit suite
passes
- [x] Text is internationalised — no user-facing strings changed
- [x] UserConfig hot reload is unaffected — no UserConfig changes
- [x] Docs have been updated if necessary — no documentation changes
needed
- [x] You've read through your own file changes for silly mistakes etc
<!--
Be sure to name your PR with an imperative e.g. 'Add worktrees view',
and make sure the title
is suitable to be included as a bullet point in release notes (i.e.
phrased from a user's point
of view).
see https://github.com/jesseduffield/lazygit/releases/tag/v0.40.0 for
examples
-->
flake.lock pins the exact revision of everything the Nix build pulls in
(the package set it takes git, Go and the formatters from, plus a few
helper libraries), much like go.sum does for Go modules. Nothing
refreshes it automatically and no CI job exercises it, so the pins had
quietly drifted the better part of a year behind.
The flake-compat entry also grows a "?rev=...&revCount=..." suffix on
its download URL. That is not a version change: the server hosting the
archive advertises those two values as part of the canonical URL now,
and they only restate the rev and revCount that the same entry already
lists as separate fields. The archive fetched is byte-for-byte identical
either way.
The nixpkgs package set renamed the Nix code formatter: what used to be
called nixfmt-rfc-style is now simply nixfmt, and the old name lives on
only as an alias. Both names resolve to the identical program, so this
doesn't change how anything gets formatted.
The rename comes first because the dependency update in the next commit
makes that alias start printing a deprecation warning, so doing it in
this order means no commit in the history evaluates with one.
PipeCommands ran every command in its own goroutine, each doing
Start/read-stderr/Wait, with nothing ordering one goroutine's Start
against another's Wait. That ordering matters: StdoutPipe registers the
parent's read end in cmd.parentIOPipes, and Cmd.Wait closes those
descriptors when it returns. The next command's Stdin is that very
*os.File, and exec passes a user-supplied *os.File through untouched, so
Start hands the child whatever the fd happens to be at that moment. If
the producer finished and got reaped before the consumer's goroutine
reached Start, that fd was already closed, File.Fd() returned -1, and
the child was started with fd 0 closed -- reading nothing at all.
The only caller is the pre-2.35 fallback in SaveStagedChanges, which
pipes `git stash show -p` into `git apply -R`. Losing that race left git
apply with an empty patch, so it failed with "unrecognized input", the
following `git stash drop` never ran, and the user was left with a stray
stash entry. This turned up as a flaky stash/stash_staged on the git
2.32.0 CI job; the newer-git jobs take the `git stash push --staged`
path and never reach this code.
Starting every command up front removes the race, and collecting stderr
into buffers lets exec's own copying goroutines do the work. That also
fixes two lesser problems in the same function: finalErrors was appended
to from several goroutines without synchronization, and a failed Start
was only logged, so a pipeline that never ran reported success.
PipeCommands ran every command in its own goroutine, each doing
Start/read-stderr/Wait, with nothing ordering one goroutine's Start
against another's Wait. That ordering matters: StdoutPipe registers the
parent's read end in cmd.parentIOPipes, and Cmd.Wait closes those
descriptors when it returns. The next command's Stdin is that very
*os.File, and exec passes a user-supplied *os.File through untouched, so
Start hands the child whatever the fd happens to be at that moment. If
the producer finished and got reaped before the consumer's goroutine
reached Start, that fd was already closed, File.Fd() returned -1, and
the child was started with fd 0 closed -- reading nothing at all.
The only caller is the pre-2.35 fallback in SaveStagedChanges, which
pipes `git stash show -p` into `git apply -R`. Losing that race left
git apply with an empty patch, so it failed with "unrecognized input",
the following `git stash drop` never ran, and the user was left with a
stray stash entry. This turned up as a flaky stash/stash_staged on the
git 2.32.0 CI job; the newer-git jobs take the `git stash push --staged`
path and never reach this code.
Starting every command up front removes the race, and collecting stderr
into buffers lets exec's own copying goroutines do the work. That also
fixes two lesser problems in the same function: finalErrors was appended
to from several goroutines without synchronization, and a failed Start
was only logged, so a pipeline that never ran reported success.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Entering or leaving filtering mode switched the screen mode and the
focused panel immediately, then reloaded the commit list in the
background. The result was an unfiltered list presented in the layout
that says "you are filtering", with nothing to say that anything was
still happening — and in a big repo that state can last seconds.
This is a regression in 0.64.0 (more specifically, from #5790): before
that we stopped blocking the UI thread on refreshes, the reload happened
before any of it, so the two always agreed; the price was a frozen UI
for the duration.
Do neither: reload on a worker, so the UI stays live, and hold back
everything the user can see of the change until the new lists are ready,
so they still land together in one frame. A waiting status says what is
going on in the meantime, and blocking input means the keys pressed
while it runs arrive after the change rather than acting on a list that
is about to be replaced.
The commit list a filtering mode change leaves behind has nothing to do
with the one that was showing, so the scroll position it inherits says
nothing about where the selection ended up, and the selection can land
anywhere off screen. PostRefreshUpdate only moves the cursor within the
existing scroll position, so ask for the scroll separately, the way the
commits refresh does when it moves the selection itself.
Exiting filtering mode looked like it worked, but only by accident: the
commits refresh recognizes the commit that was selected before it ran,
selects it again at its new index, and scrolls because the index moved.
That does nothing for the case where the commit is gone from the list, or
for entering filtering mode, where we select the first commit ourselves.
Entering or leaving filtering mode switched the screen mode and the
focused panel immediately, then reloaded the commit list in the
background. The result was an unfiltered list presented in the layout
that says "you are filtering", with nothing to say that anything was
still happening — and in a big repo that state can last seconds.
Before we stopped blocking the UI thread on refreshes, the reload
happened before any of it, so the two always agreed; the price was a
frozen UI for the duration.
Do neither: reload on a worker, so the UI stays live, and hold back
everything the user can see of the change until the new lists are ready,
so they still land together in one frame. A waiting status says what is
going on in the meantime, and blocking input means the keys pressed while
it runs arrive after the change rather than acting on a list that is
about to be replaced.
Setting a filter and clearing it are the same transition in opposite
directions: mutate the mode, bring the screen mode in line with it,
reload the views that depend on the filter, and put the selection
somewhere sensible in the reloaded commit list. They were implemented
twice, once in the filtering menu and once in ModeHelper, which is how
the two came to repaint the commit list in different ways.
Derive the screen mode and the panel switch from whether a filter is
active after the change, so both directions fall out of the same code,
and give ModeHelper the entry points for both. The filtering menu is
left with nothing but the menu.
Blocking keyboard input and hiding the working tree state mode are two
separate concerns; they were fused into one helper because every caller
so far wanted both. A caller that blocks input for something other than a
rebase would then hide the "Rebasing" indicator for the duration of its
operation, which has nothing to do with it.
Make it an explicit option instead, so blocking input on its own doesn't
imply anything about the modes on display.
The mode it suppresses is active for any working tree state, not just a
rebase: merging, cherry-picking and reverting show through the same
indicator. Name it after what it hides.
Whether a graph can be drawn was read from the filtering mode, while the
graph itself is drawn over the commit list in the model. Those two only
agree once the list has been reloaded for the new mode, and a filtering
mode change reloads the list in the background, so in between we can be
asked to draw a graph over a list the graph makes no sense for.
That is not just cosmetic. Commits in a filtered list are almost never
each other's parents, so no pipe ever terminates: the pipe set grows by
one per row and every continuing pipe rescans it, which is cubic in the
length of the list. Escaping out of filtering mode with a filtered list
of 13000 commits — as you get once the 300 commit limit has been lifted,
which happens for good as soon as the selection passes COMMIT_THRESHOLD
— wedges the UI thread for around twenty minutes.
Record whether the list was loaded with a filter, right where the list
itself is stored, and decide from that. The graph now also stays up while
the pre-change list is still on display, rather than vanishing a moment
before the list it belongs to.
This fixes spurious test failures caused by git's auto maintenance
running concurrently with a test's fixture setup; see the first commit's
message for details.
In addition, we change the test harness so that such a failure in a
setup method doesn't take down the whole test binary.
A failing setup step called Shell.fail, which panicked. Tests run as
parallel subtests, so that panic aborted the entire test binary: one bad
fixture cost us the results of all ~500 tests, and the failure was
reported as a stack trace rather than against the test that caused it.
Keep panicking to skip the remaining setup steps -- they would only
produce follow-on failures -- but recover in createFixture and return the
message as that test's error. All three clients already propagate an
error from a test, so they report it the way they report any other
failure.
Every `git commit` forks `git maintenance run --auto --quiet --detach`,
and git 2.54 changed what that runs from the `gc` task to the
"geometric" strategy. The geometric repack's auto condition passes its
threshold of 100 to too_many_loose_objects(), which estimates the loose
object count from the objects/17 fanout directory times 256, so the real
trigger is two objects in that one directory -- where the old gc task
needed 27. Fixture repos reach two easily: every CreateNCommits(n>=6)
repo already stores the blob for file06.txt there, so a single commit
object hashing into 17 (about 4% of fixtures with 10 commits, 15% with
40) tips it over, and from then on every commit in that repo forks a
detached `git repack -d`, which prunes loose objects while the next
fixture command -- or lazygit under test -- is still working in the same
repo.
That is where the CI panics during fixture setup come from:
panic: error running command: [git commit -m commit-10]
error: invalid object 100644 50d5612... for 'file09.txt'
error: Error building trees
The reported hashes are exactly the fixture blobs, so `git add` staged
them correctly; they were unlinked underneath the commit. Only the
"git latest" jobs saw this, since the pinned 2.32/2.38/2.44 jobs predate
the strategy change.
git's own test suite guards against the same thing by exporting
GIT_TEST_MAINT_AUTO_DETACH=false ("Ensure that tests cannot race with
background maintenance by default"). Turning maintenance off outright is
stronger: no test repo needs it, and it also spares us a forked git
process per commit. maintenance.auto has been honored since git 2.29, so
it covers every version in the CI matrix.
Measured on a 40-commit fixture: a background repack fired in 4 of 25
runs before, 0 of 25 after.
### Description
Add `just` to the default Nix development shell so contributors can use
the repository's `justfile` without installing `just` separately. Keep
GNU Make available as the existing fallback.
no `flake.lock` update required. `just` comes from the already-pinned
`nixpkgs` input, and no flake input changes.
Closes#5881.
### Testing
- `nix-instantiate --parse flake.nix`
- `nix flake check`
- `nix develop --ignore-environment -c just --version`
- `nix develop --ignore-environment -c go version`
- `nix develop --ignore-environment -c just format`
- `nix develop --ignore-environment -c just build`
- `nix develop --ignore-environment -c just lint`
- `nix develop --ignore-environment -c just unit-test`
- `nix-shell --run 'just --version'`
### Please check if the PR fulfills these requirements
* [x] Cheatsheets are up-to-date (run `go generate ./...`)
* [x] Code has been formatted (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#code-formatting))
* [x] Tests have been added/updated (see
[here](https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md)
for the integration test guide) — no test-code change needed; validated
with the commands above
* [x] Text is internationalised (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#internationalisation))
— no user-facing strings changed
* [x] If a new UserConfig entry was added, make sure it can be
hot-reloaded (see
[here](https://github.com/jesseduffield/lazygit/blob/master/docs/dev/Codebase_Guide.md#using-userconfig))
— no UserConfig entry added
* [x] Docs have been updated if necessary — no documentation change
needed
* [x] You've read through your own file changes for silly mistakes etc
Fixes#5879: with an external diff command configured, quickly
navigating between commits on Windows accumulates orphaned
`git.exe`/`difft.exe`/`conhost.exe` processes that keep computing their
diffs in the background and persist after lazygit exits.
Stopping a pty task on Windows relied on `ClosePseudoConsole`, whose
`CTRL_CLOSE_EVENT` only reaches clients *attached to the pseudoconsole
at that moment*. Attachment happens asynchronously during child startup,
so a task stopped within the first few milliseconds of its life — which
is exactly what rapid navigation produces — misses the event entirely
and survives, together with its whole process tree (git for Windows
spawns through a two-level git.exe wrapper, so a single task has several
attach windows).
The fix puts the child into a job object before it executes its first
instruction (created suspended → assigned → resumed), so every
descendant is in the job from the start. The pty teardown still closes
the pseudoconsole first and gives clients that received the close event
a moment (500ms) to exit through their own handlers — git's cleans up
lock files — and then terminates whatever is left in the job.
`JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE` doubles as a safety net: if lazygit
exits without running the teardown, the OS closes the job handle and
reaps the tree.
Validated with a harness that mimics lazygit's stop path with randomized
0–120ms stop delays: before the fix, 3 of 30 process trees survived as
permanent orphans per run; after it, three runs of 30 all came back with
zero orphans, with the job kill catching exactly the children that
missed the close event (6 of 90) while the rest still exited gracefully
through the event as before.
The pty teardown in Close runs on a background goroutine that doesn't
get to finish when lazygit is quitting: the process exits milliseconds
after the view buffer managers are closed. The job objects still cover
the clients -- KILL_ON_JOB_CLOSE reaps them when the process's handles
are rundown at exit -- but nothing reaps the conhost, so on Windows
builds whose conhost fails to run down on its own, quitting leaks one
conhost per live pty.
This is not a rare timing window: a diff longer than what has been
read keeps its git process (and thus its pty and conhost) running for
the entire time it is displayed, so that scrolling can read more.
Quitting while looking at a long diff is therefore the common case,
and with an external differ configured it leaks a conhost on affected
builds on almost every quit.
Fix this by having the gui's shutdown path wait synchronously for the
in-flight teardowns after closing the view buffer managers. A quit
signal makes the teardowns skip the conhost rundown wait -- the
conhost serves nothing once its clients are dead, and the exit must
not stall for its sake -- so the wait normally completes in
milliseconds, keeping quit as fast as before; a 2-second cap protects
the exit path even if a teardown wedges.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A pseudoconsole's conhost.exe is spawned by CreatePseudoConsole as a
child of lazygit, so it is not part of the job object that the pty
teardown kills. That is normally fine: a healthy conhost runs itself
down once the reference handle is closed and its clients are gone. But
conhost builds before the ConPTY overhaul that shipped with Windows 11
24H2 (confirmed on 23H2, build 22631) fail to complete the rundown
when a client attached after the close event was delivered and was
then killed -- the fate of exactly the clients the job kill exists for
-- and such a conhost lingers forever with no clients, at a rate of
about one per five fast commit navigations. These builds remain
widespread: all of Windows 10 (whose ESU tail runs into 2028, and
whose hardware often cannot run Windows 11 at all) plus pre-24H2
Windows 11 fleets.
Since Windows offers no way to obtain the conhost's pid or handle from
the HPCON, identify it by diffing lazygit's direct conhost children
around the CreatePseudoConsole call, serialized by a mutex so that two
concurrently starting ptys can't confuse each other's diff, and open a
handle immediately so that pid reuse is harmless. The teardown then
gives conhost a second to exit on its own before terminating it; on
healthy builds the wait succeeds and the reap never fires. If the
conhost can't be identified unambiguously, we simply don't reap, which
is no worse than before.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Stopping a pty task on Windows relies on ClosePseudoConsole, which
delivers CTRL_CLOSE_EVENT to the console's attached clients. But only
to those attached at that moment: when the user flicks quickly through
commits, a task is often stopped within the first few milliseconds of
its life, before the child has attached to the pseudoconsole. Such a
child misses the event and survives, running the entire diff to
completion in the background (spawning one external differ per changed
file) and keeping its conhost.exe alive; rapid navigation accumulates
these git/difft/conhost trees, and they outlive lazygit. Grandchildren
are affected too: git for Windows runs commands through a two-level
git.exe wrapper, so a single task has several attach windows, and a
grandchild spawned while the console is going down is orphaned even
when its parent got the event and exited.
Fix this by putting the child into a job object before it runs its
first instruction (created suspended, assigned, then resumed), so that
every descendant is in the job from the start; the teardown in Close
terminates the job right after initiating the pseudoconsole close.
There is no point in a grace period between the two: the close event
is not a graceful signal -- git and the common diff tools leave it to
the default handler, which calls ExitProcess at an arbitrary point --
so clients that received it are already dying, and the kill exists for
those that missed it. Killing at an arbitrary point cannot leak a
stale index.lock, because pty-rendered commands no longer take that
lock (see withPtyGitConfig in pkg/gui/pty.go).
The pseudoconsole close runs on its own goroutine because the kill
must not wait for it: on builds where ClosePseudoConsole blocks until
the console host exits (pre-24H2), the host keeps running as long as a
surviving client does, and that client only goes away through the job
kill; sequencing the kill after a blocking close would deadlock in
exactly the case the kill exists for.
KILL_ON_JOB_CLOSE doubles as a safety net: if lazygit exits without
running the teardown, the OS closes the job handle and reaps the tree.
In a harness that mimicked the stop path with randomized 0-120ms stop
delays, 3 of 30 process trees survived as orphans before this change;
none survive with it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The task stop path terminates the still-running command by pulling its
*os.Process out of the Cmd interface and applying one global strategy
(TerminateProcessGracefully) to it. That shape can't accommodate the
upcoming fix for orphaned process trees on Windows: there, stopping a
pty task requires terminating the entire process tree via a job object
whose handle lives with the pty, not with the process. And the two Cmd
implementations genuinely need different strategies anyway: a
process-group kill (the likely future fix for #5675 on Unix) is only
safe for pty children, which run as session leaders, while plain
commands share lazygit's own process group.
So let each Cmd implementation decide how to terminate itself, and drop
GetProcess, which had no other callers. No change in behavior.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
At the end of a diff against the worktree, git re-reads and refreshes
the index and writes it back if it found stale stat information
(diff.autoRefreshIndex, on by default). It holds index.lock for the
whole refresh; GIT_OPTIONAL_LOCKS does not cover this lock, and the
window scales with the size of the repository (~150ms for a 6k-file
repository with a warm stat cache).
On Windows, a pty task that is stopped because the user moved on
terminates its git process at an arbitrary point: tearing down the
pseudoconsole delivers CTRL_CLOSE_EVENT, which git leaves to the default
handler, which simply calls ExitProcess. If that lands inside the
refresh, a stale index.lock is left behind and the next git command
chokes on it. This is the same problem that 98801da106 fixed by no
longer killing git processes; the ConPTY support added in 0.63
reintroduced it through the close event.
Disable the automatic refresh for pty-rendered commands. They can afford
it: the refresh only persists refreshed stat information, and lazygit's
foreground git status refreshes -- which never run in a pty and are
never killed -- already write that back on every user action and on
terminal focus-in. The cost is that while the on-disk stat cache is
stale, an external differ is invoked even for files whose stat
information changed but whose content didn't, showing them as empty
diffs; this heals with the next foreground refresh, which also
re-renders the view.
Unix keeps the refresh: a stopped pty child gets SIGTERM there, and
git's signal handlers remove its lock files, so the lock window is
harmless. The rawGit renderer keeps it too: its tasks don't run in a pty
and are never killed on Windows -- they either run to completion or die
on a broken pipe mid-output, before the refresh begins.
At the end of a diff against the worktree, git re-reads and refreshes
the index and writes it back if it found stale stat information
(diff.autoRefreshIndex, on by default). It holds index.lock for the
whole refresh; GIT_OPTIONAL_LOCKS does not cover this lock, and the
window scales with the size of the repository (~150ms for a 6k-file
repository with a warm stat cache).
On Windows, a pty task that is stopped because the user moved on
terminates its git process at an arbitrary point: tearing down the
pseudoconsole delivers CTRL_CLOSE_EVENT, which git leaves to the
default handler, which simply calls ExitProcess. If that lands inside
the refresh, a stale index.lock is left behind and the next git
command chokes on it. This is the same problem that 98801da106 fixed
by no longer killing git processes; the ConPTY support added in 0.63
reintroduced it through the close event.
Disable the automatic refresh for pty-rendered commands. They can
afford it: the refresh only persists refreshed stat information, and
lazygit's foreground git status refreshes -- which never run in a pty
and are never killed -- already write that back on every user action
and on terminal focus-in. The cost is that while the on-disk stat
cache is stale, an external differ is invoked even for files whose
stat information changed but whose content didn't, showing them as
empty diffs; this heals with the next foreground refresh, which also
re-renders the view.
Unix keeps the refresh: a stopped pty child gets SIGTERM there, and
git's signal handlers remove its lock files, so the lock window is
harmless. The rawGit renderer keeps it too: its tasks don't run in a
pty and are never killed on Windows -- they either run to completion
or die on a broken pipe mid-output, before the refresh begins.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
We already excluded the most commonly used commit trailers from being
auto-wrapped when typing or rewording a commit message, but this was
limited to two hard-coded ones ("Signed-off-by:" and "Co-authored-by:").
Extend this mechanism to use a heuristic to prevent more trailers from
wrapping; the heuristic kicks in for any "Key: Value" line if Key
contains a dash, or the value looks like a URL (so that it also catches
things like "Bug: https://my-bug-tracker/345").
Fixes https://github.com/jesseduffield/lazygit/discussions/5869.
We already excluded the most commonly used commit trailers from being
auto-wrapped when typing or rewording a commit message, but this was
limited to two hard-coded ones ("Signed-off-by:" and "Co-authored-by:").
Extend this mechanism to use a heuristic to prevent more trailers from
wrapping; the heuristic kicks in for any "Key: Value" line if Key
contains a dash, or the value looks like a URL (so that it also catches
things like "Bug: https://my-bug-tracker/345").
To avoid mistaking a "Key: Value"-looking line in the message body for a
trailer, only apply the heuristic in the last paragraph of the message,
i.e. the block of lines at the end that is separated from the body by a
blank line. Each line there is judged on its own, so a line that isn't
recognized as a trailer still wraps without affecting the real trailers
next to it.
Having the cache in state.yml causes this file to be rewritten every
60s, which is annoying if you have a lazygit running in the background
somewhere without even realizing it, and it keeps overwriting the
foreground lazygit's newer command shell history and recent repos list
with its stale data. State.yml should only contain things that change in
response to user actions, not periodically.
Having the cache in state.yml causes this file to be rewritten every
60s, which is annoying if you have a lazygit running in the background
somewhere without even realizing it, and it keeps overwriting the
foreground lazygit's newer command shell history and recent repos list
with its stale data. State.yml should only contain things that change in
response to user actions, not periodically.
For a while now we have been showing Github icons in the branches panel
to indicate which branches have an associated pull request. This PR
changes this so that open PRs (which used to show a green Github icon)
now show a colored symbol indicating the combined state of the Github
checks (if any are configured for this repo):
<img width="1046" height="418" alt="image"
src="https://github.com/user-attachments/assets/3e9074a6-0ae4-423a-90d9-306863daa46c"
/>
This lets you see at a glance which of your PRs are ready to merge.
(Note however that this feature knows nothing about which of the checks
are _required_ for merging, so a branch showing a failure icon may still
be ready to merge if the failing checks are not required ones.)
It may be a little confusing for new users to see two green checkmarks
for a branch, one to the left of the name and one to the right; they
mean very different things. Still, seeing the Github checks state in the
branches list is so useful that I think it's a good compromise;
hopefully users will learn quickly enough what all the icons mean.
When selecting a branch that has a pull request, the main view already
showed some information about the PR (its title, pr number, and the
state (open/closed/merged). This PR adds an aggregated pull request
checks field to this, indicating the overall checks state
(passed/failed/pending/...). It has a hyperlink taking you directly to
the checks tab on Github.
<img width="1538" height="246" alt="CleanShot 2026-07-30 at 12 32 25@2x"
src="https://github.com/user-attachments/assets/68aa24da-d78a-45d7-8812-db8b509bbbc8"
/>
The update frequency of the checks badge is tied to the auto-fetch
cadence for now (once every minute by default); you can fetch manually
to force an update, and some user actions (including the focus-in
refresh) update the PR states too, but anything more fancy (e.g.
fetching just the checks state of the selected branch) would have been
more work, and I want to see if this is good enough.
In the branches list we show the checks icon (✓, ✗ etc) instead of the
gihub icon for branches that are open and have a state. It is a little
confusing, because the ✓ in front of the name means something very
different than the ✓ after it, but the checks status is just too useful
to see in the list.
In the main view we show it as a compact status before the PR title,
with a hyperlink that takes you directly to the checks tab in Github.
The branch controller should decide which pull request to show, not how its
header is styled and linked. Move the existing formatter and state badge next
to the branch presentation helpers so subsequent header changes stay in one
layer.
GitHub exposes a combined status for the head commit without requiring
individual check contexts. Include that rollup in the existing request
and startup cache so every consumer sees the same state without making a
second network request.
The fetch currently combines transport, JSON decoding, and model
conversion, which makes response changes difficult to verify without
exercising the network. Put the deterministic work behind a small parser
so later payload changes can be covered with raw GraphQL fixtures.
For a long time lazygit has used the term "custom pager" to refer to
what's really a "diff renderer". A pager is a program that allows you to
view output page by page (hence the name), e.g. less; lazygit's custom
diff renderers are not pagers. It used the term only because the feature
is implemented using git's `GIT_PAGER` env var, but that's an
implementation detail.
Rename the 'git.pagers' config to 'git.diffRenderers', and restructure
its elements while we're at it to make things clearer:
- Add a 'type' field to explicitly specify which type of diff renderer
it is (the two fundamentally different ones are 'stdinFilter' and
'extDiff').
- Add a third type, 'rawGit', which has an 'args' field that makes it
easy to use 'git diff --color-words' as a custom renderer
- Unify the old 'pager' and 'externalDiffCommand' fields to a single
'command' field for both types
Existing config files are migrated automatically.
For a long time lazygit has used the term "custom pager" to refer to
what's really a "diff renderer". A pager is a program that allows you to
view output page by page (hence the name), e.g. less; lazygit's custom
diff renderers are not pagers. It used the term only because the feature
is implemented using git's GIT_PAGER env var, but that's an
implementation detail.
Rename the 'git.pagers' config to 'git.diffRenderers', and restructure
its elements while we're at it to make things clearer:
- Add a 'type' field to explicitly specify which type of diff renderer
it is (the two fundamentally different ones are 'stdinFilter' and
'extDiff').
- Add a third type, 'rawGit', which has an 'args' field that makes it
easy to use 'git --color-words' as a custom renderer
- Unify the old 'pager' and 'externalDiffCommand' fields to a single
'command' field for both types
Existing config files are migrated automatically.
It doesn't matter for what this test used to test (that nothing changes
if the 'pagers' array exists), but it will be relevant once we further
migrate the 'pagers' array from there.
We don't want callers to need any additional logic, so pass in the
translation set so that the function can decide what static text to
return. This allows us to get rid of the CurrentPagerUsesGitConfigDiff
method which is in the way for the refactoring we're about to do.
It has served its purpose when config migration was initially
implemented, but nobody runs this benchmark nowadays, and the example
config has run out of date with reality. Some PRs have still updated it
when they made changes to the config, but others didn't, and it's
unclear what the rules are; so let's just remove it.
Pressing the left button on the current selection now starts a drag that
moves the selected commits, both in the normal commits view and for
todos during an interactive rebase. A press on an unselected row still
creates a range selection.
While dragging, a "drop here" indicator shows where the commits will be
inserted.
Moving commits with the mouse is useful for the case that you want to
move them a longer distance, because that's slow when doing it one by
one with the keyboard, and also you don't want to resolve conflicts at
every step. The standard workaround for that is to enter an interactive
rebase first and then continue it afterwards, but that's a bit
cumbersome; dragging solves that nicely.
Closes#5842.
Moving commits runs a rebase, which can take a while. Instead of
letting the drop indicator vanish the moment the button is released,
keep it in place and turn it into a "moving commits here" spinner once
the move takes longer than a short grace period, so that quick moves
stay free of flicker. The indicator is cleared when the post-move
refresh lands.
While a commit drag is in progress, escape now aborts it: the drag
state and the drop indicator are discarded and the mouse capture is
released, so nothing happens when the button is eventually released.
Otherwise escape keeps its normal meaning.
Reuse the drag autoscroller for commit drags. Scrolling stops once the
insertion point reaches the end of the allowed range in the scroll
direction, so during a rebase the view doesn't keep scrolling once the
last insertion position among the todos has been reached.
Pressing the left button on the current selection now starts a drag
that moves the selected commits, both in the normal commits view and
for todos during an interactive rebase. A press anywhere else falls
through to the usual click handling, so dragging from an unselected
line still creates a range selection, and releasing without having
moved collapses the selection to the pressed commit like a plain click
would.
While dragging, the insertion point follows the pointer: rows below
the dragged block insert after the pointed-at commit, rows above it
insert before it, and during a rebase the destination is limited to
the contiguous block of movable todos around the selection. gocui
moves the view cursor along with the pointer, so each drag event moves
it back to keep the original selection highlighted.
The move happens on release. The model may have been refreshed during
the drag, so the dragged commits are located again by their identity
(hash, subject, todo action); if they no longer form a unique
contiguous block, the drop is ignored rather than guessing.
Render the insertion point of a commit drag as a non-model item in the
commits list. It must be inserted at the right position relative to
the section headers, because the list renderer assumes non-model items
are ordered by their model index.
Not used yet, we'll hook it up to the drag gesture in the next commit.
Let the todo-move primitives take a distance instead of hardcoding a
single row, by iterating the one-row move in memory. Dropping a commit
several rows away thus rewrites the todo file once and, outside of an
interactive rebase, runs a single rebase rather than one per row.
Merge the up/down variants of the move commands into one
direction-parameterized implementation. Dragging commits is about to
need moves over arbitrary distances, which we don't want to build twice.
Like in the staging view, drag with the mouse in a list view to create a
non-sticky range selection (including auto-scrolling as the mouse
reaches the view edge).
Give the list views the same edge autoscroll during drag selection
that the staging view already has; the new mouse-release binding stops
the autoscroll when the drag ends.
Dragging with the left button held now extends the selection from the
pressed line, exactly like moving with shift+up/down does. We use the
non-sticky flavor so that the range collapses on the next plain cursor
movement, again matching the keyboard behavior.
The binding is only registered for contexts that support range selection
in the first place; dragging in other lists continues to do nothing.
The staging view (and custom patch building view) already has the
capability to create a range selection by dragging with the mouse;
however, a longer range couldn't be selected this way because the
dragging stopped at the view edge. Add auto-scrolling so that the view
scrolls as the mouse reaches the view edge; slowly on the innermost edge
row, faster on the outermost row and beyond. Scrolling starts after a
short delay so that a drag merely passing near the edge doesn't scroll.
When the pointer reaches the edge of the view during a drag (or leaves
the view entirely, which mouse capture makes possible), keep scrolling
and extending the selection: slowly on the innermost edge row, faster
on the outermost row, and very fast beyond. Scrolling starts after a
short delay so that a drag merely passing near the edge doesn't scroll.
When the view loses focus mid-drag (e.g. because a popup appeared),
cancel the autoscroll and the mouse capture.
Add press/move/release primitives next to the existing Click. The test
driver remembers the last reported position so a release doesn't have
to repeat the coordinates, and RepeatMouseMove lets a test verify that
a held-button motion event within the same cell has no effect.
Route all mouse events to the view that was under the pointer when the
left button was pressed, until the button is released. Previously each
event went to whatever view was under the pointer at the time, so a
drag that left the view's bounds started acting on neighboring views.
Since events can now carry positions outside the view, clamp the view
cursor to the view's bounds in that case (handlers still receive the
unclamped position), and require an actual click for tab activation so
that a captured drag crossing the tab row doesn't switch tabs.
Releasing a mouse button was delivered as a plain mouse-move (hover)
event: the release processing resets dragState to NOT_DRAGGING, after
which the event fell into the NOT_DRAGGING branch. Views therefore had
no way of telling that a drag gesture ended, which the upcoming
drag-based features (range selection, commit reordering) need.
Deliver the release as a real mouse event with the MouseRelease key
and normalize its modifiers to ModNone, so release bindings also match
modified drags. Make recordClickInfo ignore it: a release is the end of
a click, not a click of its own, and must not break double-click
detection.
Add a test pinning down that a press/release/press sequence at the
same position is detected as a double click. An upcoming commit starts
delivering the release as a real mouse event to the click-recording
code, which must not mistake it for a click of its own.
When the left button is pressed and the pointer then moves, the event
that made the MAYBE_DRAGGING -> DRAGGING transition fell through the
switch without being assigned a key or modifier, so the first cell of
every drag arrived at handlers as a MouseRelease event without the
motion modifier and was effectively lost. Give it the same
MouseLeft/ModMotion identity as all subsequent drag events.
Held-button motion events that stay within the pressed cell carry no
information at all; swallow them instead of letting them through as
further release-shaped events (which used to clobber the double-click
state when the pointer jittered within a cell between two clicks).
I'm not a skilled UI designer, so I suspect there may be even better
options, but it's definitely already better than the raw ASCII "---" we
had before.
Put the line only at the beginning because it looks bad if the line
after the label is misaligned when labels don't have the same width
(e.g. "Remote" vs. "Local" in the divergence view).
When selecting sibling directories sharing a common prefix, trying to
add them to a custom patch or discarding them from the commit would only
add one, not both. We had the same bug in the files panel and fixed it
in #3599, but forgot to make the equivalent change in the commit files
panel.
Fixes#5866.
The root item's path is ".", and the path of a file at top level is
"./file". When using GetPath, this gives us "." and "file",
respectively, and isDescendentOfSelectedCommitFileNodes would return
false for these.
Working with the internal paths (i.e. without stripping the leading
"./") fixes this.
There is no known breakage that is caused by this, that's why I'm not
adding an integration test that demonstrates a bug.
Equivalent to the change that was made to isDescendentOfSelectedNodes in
files_controller.go in 302b621b68.
It never changes inside this function, so there's no need to recompute
it with every loop iteration.
Equivalent to the change that was made to isDescendentOfSelectedNodes in
files_controller.go in d0c6e27fee.
When lazygit is running in a VS Code window that doesn't have the focus
(e.g. a split tab) and you click in the commits panel to focus it and
select a commit at the same time, it would briefly select the commit you
clicked but then flash back to the commit that was previously selected.
This PR fixes that so that the clicked commit stays selected.
This was only a problem with VS Code; in Zed's builtin terminal it
worked, apparently because it first dispatches the click and then the
focus-in event. Ghostty and iTerm2 were not affected because they don't
dispatch clicks in inactive windows or tabs at all.
Labelling as ignore-for-release because it fixes a regression that was
introduced since the last release.
This fixes the problem described in the previous commit; we no longer
capture the selection at the start of the refresh. There's no reason to
do that (we don't do it for branches either). It is enough to capture
the selection in the final bounce, before we assign the new model slice.
When clicking in the commits view of lazygit running in an unfocused VS
Code window, VS Code first sends us the focus-in event and then the
mouse-click. The focus-in refresh captures the selection when it starts,
then we handle the mouse click and you briefly see the clicked row
getting selected, but then the selection flashes back to the original
row as the refresh restores it when done.
CreatePseudoConsole and ResizePseudoConsole reject zero dimensions with
E_INVALIDARG, but we legitimately request them: the pty is sized after
the main view, and that view is zero-sized while hidden, e.g. in
full-screen mode with a side panel focused. Entering that mode while a
custom pager is configured therefore made StartPty fail (degrading to
unpaged output now that the fallback works), and resizing a live pty
from onResize would fail layout. The Unix pty accepts zero sizes, so
the clamp lives in the Windows implementation only.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
CreatePseudoConsole rejects zero dimensions with E_INVALIDARG, so
starting a pty sized after a hidden (and thus zero-sized) view fails.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
NewCmdTask feeds the reader returned by its start func into a
bufio.Scanner, and Scanner.Scan panics with a nil pointer dereference
when that reader is nil. Two start funcs could produce one:
- newPtyTask's fallback for a failed StartPty returned a literal nil
reader, alongside an ExecCmd that was never started, so the intended
"fall back to a plain cmd task" never worked. This crashed lazygit on
Windows when using a custom pager with the main view zero-sized, e.g.
after pressing + twice to enter full-screen mode with a side panel
focused: ConPTY rejects zero dimensions, making StartPty fail.
- startCmdWithPipe returned nil when the pipe couldn't be created,
which the Unix pty fallback path can trigger, since a failed pty
start can leave the tty assigned to the command's stdout.
Make startCmdWithPipe never return a nil reader: when the pipe can't be
created, don't start the command at all and return an empty reader so
the task shuts down cleanly with the error in the log. Then route
newPtyTask's fallback through it, so a StartPty failure degrades to
running the command without a pty: the pager is lost, but the command's
output still renders.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
NewCmdTask feeds the reader returned by its start func straight into a
bufio.Scanner, whose Scan panics on a nil reader with a nil pointer
dereference. startCmdWithPipe returns exactly that when the pipe cannot
be created.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The fallback path in newPtyTask (taken when StartPty fails) needs the
same start-the-command-with-a-pipe logic that newCmdTask uses, so pull
it out into a helper that both can share. No behavior change.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A refresh from the UI thread returns immediately and applies its model
and view updates as queued UI-thread callbacks. A key pressed before
those have run is handled against the stale, pre-refresh state. For most
keys that's harmless, but some handlers turn that state into git
commands: pressing space twice in quick succession in the staging panel
builds the second patch from the already-applied diff and fails with
'patch does not apply', because the refresh after the first press is
what moves the selection to the next stageable hunk.
Notably, this is not just a regression of the recent change that made
UI-thread refreshes non-blocking; the window was merely much narrower
before. A blocking refresh parked the UI thread while the scopes'
bounces were queued, and the event loop drains pending keyboard input
with priority over queued user events, so a key pressed during the
blocked window still beat the queued state updates. The guarantee that
the next keypress sees post-refresh state had already ended when the
scopes' state updates moved from worker-side mutex-guarded writes to
UI-thread bounces.
Fix it with the input-blocking mechanism we already use for commit
surgery, exposed as a new RefreshBlockingInput entry point: it begins
blocking events synchronously in the calling handler, and ends the block
from a callback that the finishing step queues behind the refresh's own
updates. Keys pressed while the refresh is in flight are buffered and
replayed, in order, against the fully refreshed state; since a replayed
key's handler re-enters this same path, a burst of keypresses applies
sequentially, each one seeing the previous one's refresh. Unlike the old
blocking refreshes, this doesn't freeze the UI thread: rendering,
spinners, resizing, and mouse scrolling keep working while input is
withheld.
Blocking input is opt-in per call site rather than the default for all
UI-thread refreshes, because most refreshes (the focus-in and startup
refreshes, say) don't produce state that the next keypress depends on,
and blocking on them would delay typing for no reason. It should also be
limited to quick, narrow-scoped refreshes: a full refresh, or any scope
that pulls in COMMITS, can take very long in large repos and should
usually not hold up input.
Use the new function for the staging panel's stage/discard/edit-hunk
refreshes, for moving rebase todos, and for stash operations.
Labelling as ignore-for-release because it fixes regressions introduced
after the last release.
On startup we don't want to block input during the initial refresh (it
should be possible to press, say, `4` to jump to the commits panel right
after startup without a delay), and we also want panels to show their
contents as soon as possible; it doesn't matter so much that it's not in
sync, we go from empty to populated here. However, when switching repos
it can be confusing that some panels that are slow to update still show
the old repo's data while others already show the new one's data, so
update the UI only when everything is ready, and also block input to
prevent accidentally trying to act on the old, stale data.
Popping or dropping a stash shifts the indices of the entries below it,
and renaming re-creates the stash at the top, shifting all the others.
The stash model is only rebuilt by the refresh, which finishes in the
background, so acting on the next entry in quick succession — pressing
the key, confirming the popup, and pressing again right away — reads the
stale pre-operation indices and targets the wrong stash. Note that the
confirmation popup is no protection here: the race starts when the
confirm handler runs, and the next keypress can easily beat the refresh.
Use RefreshBlockingInput so a quick follow-up keypress is buffered and
replayed once the refreshed stash list is in place.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Moving a todo rewrites the todo file and advances the selection
synchronously, but the commits model is only rebuilt by the refresh. A
second press arriving before that grabs the swapped-with todo from the
stale model at the advanced index and moves it back, so holding the key
to move a todo several slots misbehaved. Use RefreshBlockingInput so the
second press is buffered and replayed once the moved todo list is in
place.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Moving a todo up or down rewrites the todo file and advances the
selection synchronously, but the commits model is only rebuilt by the
refresh, which finishes in the background. A second keypress arriving
before that reads the pre-move model at the advanced selection index —
that's the todo the first move swapped with, so the second press moves
that one back instead of moving the selected todo further. Two rapid
presses (e.g. from holding the key down) thus amount to a net no-op.
The two presses also spawn two racing refreshes whose model updates can
land in either order, so the todo list can even end up disagreeing with
the todo file. That's why the test continues the rebase and asserts the
resulting commit order instead of the displayed list: the rebase replays
the file, which is deterministic.
The test documents this currently broken behavior; the fix comes next.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A refresh from the UI thread returns immediately and applies its model
and view updates as queued UI-thread callbacks. A key pressed before
those have run is handled against the stale, pre-refresh state. For most
keys that's harmless, but some handlers turn that state into git
commands: pressing space twice in quick succession in the staging panel
builds the second patch from the already-applied diff and fails with
'patch does not apply', because the refresh after the first press is
what moves the selection to the next stageable hunk.
Notably, this is not just a regression of the recent change that made
UI-thread refreshes non-blocking; the window was merely much narrower
before. A blocking refresh parked the UI thread while the scopes'
bounces were queued, and the event loop drains pending keyboard input
with priority over queued user events, so a key pressed during the
blocked window still beat the queued state updates. The guarantee that
the next keypress sees post-refresh state had already ended when the
scopes' state updates moved from worker-side mutex-guarded writes to
UI-thread bounces.
Fix it with the input-blocking mechanism we already use for commit
surgery, exposed as a new RefreshBlockingInput entry point: it begins
blocking events synchronously in the calling handler, and ends the
block from a callback that the finishing step queues behind the
refresh's own updates. Keys pressed while the refresh is in flight are
buffered and replayed, in order, against the fully refreshed state;
since a replayed key's handler re-enters this same path, a burst of
keypresses applies sequentially, each one seeing the previous one's
refresh. Unlike the old blocking refreshes, this doesn't freeze the UI
thread: rendering, spinners, resizing, and mouse scrolling keep working
while input is withheld.
Blocking input is opt-in per call site rather than the default for all
UI-thread refreshes, because most refreshes (the focus-in and startup
refreshes, say) don't produce state that the next keypress depends on,
and blocking on them would delay typing for no reason. It should also be
limited to quick, narrow-scoped refreshes: a full refresh, or any scope
that pulls in COMMITS, can take very long in large repos and should
usually not hold up input.
The staging panel's stage/discard/edit-hunk refreshes use it now.
Pressing space twice in quick succession in the staging panel is supposed
to stage two hunks: the refresh triggered by the first press rebuilds the
panel's diff and moves the selection to the next stageable hunk, and the
second press stages that.
Since we made UI-thread refreshes non-blocking, the second press is
handled as soon as it arrives, while that refresh is still in flight. It
then reads the stale pre-refresh diff, builds the first hunk's patch
again, and git apply fails with 'patch does not apply' because those
lines are already in the index.
The test documents this currently broken behavior; the fix comes next.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The test driver waits for lazygit to become idle after every keypress, so
tests could never exercise what happens when a key arrives while the
previous key's processing is still in flight — for example while the
refresh triggered by the previous key hasn't updated the model yet. Real
users type faster than that all the time.
PressRapidly injects all its keys back to back and waits for idle only
once at the end, so the second and later keys are queued before the first
one's processing has finished. The next commit uses this to demonstrate a
bug in exactly that scenario.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A few comments still reasoned in terms of SYNC vs ASYNC refreshes, a
distinction that no longer exists: sync vs async is now derived from the
calling thread. Restate them in terms of the current mechanisms
(RefreshFromWorker blocking its worker, model updates being enqueued on
the UI thread) without changing any behavior.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Checking out a remote branch that has no local counterpart creates the
local branch, refreshes, and then checks it out. The refresh exists so
that CheckoutRef finds the new branch in the model and attaches an inline
status to the branch item instead of showing a global waiting status. But
since UI-thread refreshes stopped blocking, the checkout started before
the refreshed branches had landed in the model, so the lookup failed and
we always got the waiting status. Run the checkout from the refresh's
Then, which is queued behind the model update.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Make the background fetch and the refresh that runs after it more safe
against racing with a concurrent foreground repo switch (i.e. switching
worktrees, repos, or submodules). This fixes a bunch of different
problems; see the individual commit messages for details.
gui.git, gui.helpers and gui.State are all replaced on a repo switch,
which runs on the UI thread. The background fetch and the external-
change poller read them from their own goroutines, racing the
reassignment. This race can't show up in the integration suite, which
doesn't enable the background routines, so no -race run will ever flag
it; it can only bite real users who switch repos while a background
fetch or poll is in flight.
Capture the objects a routine iteration needs in a single blocking
UI-thread hop before using them, the same pattern the refresh's input
capture uses. For the fetch this has two welcome side effects: the
fetch, the post-fetch refresh's generation baseline, and the recorded
fetch time now all refer to the same repo (the old comment documented
the timestamp's mismatch as a known, unguarded race), and the git
instance the fetch runs through is pinned to that repo's directory, so
a switch mid-fetch can no longer direct in-flight work at the new repo.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
PostFetchRefresh's refresh is the only background refresh carrying a
Then callback, and Then callbacks are not generation-guarded: when the
background fetch's refresh crossed a repo switch, the callback still
ran — in the new repo — and auto-forwarded the new repo's branches
because the old repo's fetch had completed. That was harmless in
practice (the update-ref call compares against the expected old value,
and it only does what the next fetch's auto-forward would do anyway),
but mutating refs in a repo whose fetch never happened is not an action
the user took. Skip the auto-forward when the repo generation changed
since the fetch started.
The generation is captured by the fetch's callers before the fetch
runs, not by PostFetchRefresh itself: the background fetch doesn't
block repo switching and is a network call, so by the time
PostFetchRefresh runs a switch may already have happened — a capture
there (or the one the refresh itself takes) would compare against the
new repo's generation and let the auto-forward through. For the manual
fetch the capture point makes no difference, since a foreground
operation blocks repo switching for its entire duration.
This deliberately guards only this call site rather than making Then
callbacks generation-guarded in general: a Then is an arbitrary
callback, and whether it is safe to skip on a repo switch is a decision
for the author of the call site.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The cached git config runs its `git config` reads through raw
exec.Command calls, outside the pinned git command builder, so they
followed the process working directory. A cache miss on a stale
instance — one still in use by a refresh that crossed a repo switch —
would therefore read the new repo's local config while computing data
for the old one. Give the cache a directory, set once by NewGitCommand
right after it determines the repo paths (the object is created fresh
for every repo switch, so no cross-repo cache invalidation is needed),
and run every config command there.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The refresh workers read a few files at paths relative to the process
working directory: the submodule config read of .gitmodules, the files
refresh's check for conflict markers, and the submodule stash's
existence check. Git commands are pinned to the repo their instance was
created for, but these Go file reads still followed the cwd, so a
background refresh crossing a repo switch would read the new repo's
files while computing data for the old one. Join them with the worktree
root of the instance they belong to. (Most git-state file reads —
working tree state, rebase todos, bisect info — already resolve
against RepoPaths and need no change.)
This also fixes the submodule stash's existence check for nested
submodules: it stat'ed submodule.Path, which is relative to the parent
module, against the repo root — now it uses the submodule's full path,
matching the stash command right below it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The refreshes on focus-in, right after a repo switch, and after
returning from a subprocess are full foreground refreshes, so their
tasks kept Busy() true for as long as the slowest scope took — and any
switch attempt in that window was refused with the "can't switch"
toast. The focus-in one is particularly annoying: focusing lazygit is
often precisely what the user does in order to switch repos, and right
after regaining focus is when a refresh takes longest.
Blocking the switch bought nothing there. The refusal exists for user
operations, whose follow-up work (e.g. a Then callback reading the
model) isn't covered by the switch-safety guards; but these refreshes
merely reload state, and a refresh by itself is now switch-safe: its
git commands run against the repo it was started for, and the
generation guard drops its updates when the repo changed.
We can't just mark them Background, because that flag also decides
whether the files refresh lets git take optional locks to persist its
refreshed stat cache — worth doing for an attended refresh, and the
focus-in refresh (typically running right after external changes) is
the case that profits most. So split the two meanings: a new
DontBlockRepoSwitch option dispatches the refresh's tasks as background
tasks (excluded from Busy()) while keeping the attended optional-locks
behavior. Combining it with Then panics, since Then is not
generation-guarded.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
An error returned from a gocui worker is shown to the user in an error
popup. For the branch loader's behind-counts worker that used to be the
"no such ref" popup when a background refresh crossed a repo switch:
the old repo's main branch didn't exist in the new repo. The previous
commits fix that scenario properly — the command now runs against the
repo the refresh was started for — but a stale worker can still fail
legitimately, most plausibly because that repo was deleted after
switching away from it (e.g. removing a worktree). Its results are
dropped anyway, so log the error instead of alarming the user about a
repo they already left.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A background refresh's model writes are dropped by the generation guard
when the repo is switched mid-flight, but its git commands kept running
— and because the refresh read the live git instance at each step, any
command issued after the switch ran against the new repo. Now that git
commands are pinned to the directory of the instance they were built
from, capture the instance once when the refresh starts and run every
scope's git work through it, so a switch-crossing refresh keeps
addressing the repo it was started for.
The instance is captured together with the repo generation, on the UI
thread (where repo switches run), so the pair can't straddle a switch:
an old instance paired with the new generation would compute data from
the old repo and write it into the new repo's model unguarded.
This also removes the refresh workers' unsynchronized reads of the live
instance pointer, which raced its reassignment on the UI thread when a
background refresh crossed a repo switch (foreground refreshes can't
cross one: they keep Busy() true, which refuses the switch).
Two reads keyed app-state by the live instance's repo path on a worker
and now use the captured instance, fixing which repo they file under
when crossing a switch: the pull-request cache, and the "user dismissed
the base-remote prompt" flag. The base-remote menu's handlers keep
reading the live instance: a switch dismisses any open popup, so they
can't run against the wrong repo (and the OnPress body runs under a
foreground task, which blocks switching anyway).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Lazygit changes the process working directory when switching repos, but
work that is still in flight for the previous repo can keep spawning
git commands after the switch — most notably a background refresh. Its
model writes are already dropped by the repo generation guard, but its
git commands would now run against the new repo. That is wasted work at
best; at worst it surfaces spurious error popups (the behind-base-
branch computation failing with "no such ref" when the old repo's main
branch doesn't exist in the new one) and pollutes caches belonging to
the old repo's reusable state (e.g. MainBranches' existing-branches
cache), which the user sees when switching back.
Give the git command builder the directory of the repo it was created
for, and pin every command it produces to that directory. The pinned
directory and the process cwd are identical until a switch happens
(NewGitCommand chdirs to the worktree path right before creating the
builder), so nothing changes in the steady state; the pin only takes
effect for commands built through a previous repo's GitCommand instance
after a switch, which now keep addressing the repo they were built for.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
When the user picks a base remote in the "select remote repository"
prompt, we called setGithubPullRequests directly, bypassing the refresh
machinery — which meant hand-rolling the refresh env that call needs
(with a comment explaining why), and fetching against the branches
captured when the prompt was created. Issue a PULL_REQUESTS-scoped
refresh instead: it re-reads branches and remotes (both fast even in
large repos), fetches against those fresh values, and gets the refresh
machinery's guarantees without any special-casing. The config write is
re-read by the refresh from git config, so it is guaranteed to be
picked up.
The waiting status now covers the config write and the branches/remotes
reload, while the GitHub request itself continues as a background task
— which is how every other pull-request fetch behaves.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Deleting a nested submodule (and updating its URL) chdir'd the whole
process into the parent module, ran its git commands there, and chdir'd
back. Only those commands need to run there, and a process-wide chdir
leaks the parent module's directory into any command another goroutine
spawns during that window (e.g. a background refresh's). Set the
directory on the commands themselves instead.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
To spot slow or anomalous tests across CI runs, record each test's run
duration when LAZYGIT_TEST_TIMING is set (to a file path);
run_integration_tests.sh prints them at the end, sorted by slowest
first. CI sets it for all integration jobs.
The harness appends to a file rather than writing to stdout/stderr
because `go test` captures those and only surfaces them with -v, which
would drown the signal in every test's verbose logs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The watchdog only log.Fatal'd with a message, so a hung test told us
that it timed out but not where it was stuck -- useless for diagnosing
an intermittent deadlock under the race detector. Dump all goroutine
stacks to stderr first (the harness surfaces this process's stderr on
failure), turning a bare timeout into an actionable stack trace.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add one extra integration-tests job that runs the whole suite under the
race detector. A `race` matrix dimension (default false) plus an include
entry adds a single git-latest job with LAZYGIT_RACE_DETECTOR set; races
live in lazygit's own Go code rather than in git, so one git version is
enough, and using latest skips the git-build steps.
The race job skips coverage collection: it's redundant with the non-race
latest job and would only slow the -race build down further.
Go's default 10-minute timeout was enough for running integration tests
normally (both locally and on CI), but with race detection turned on
they can take much longer to run. Increase the timeout unconditionally
to 30 minutes; we don't bother making a distinction between race vs.
normal, because a longer timeout doesn't hurt (I can't recall having hit
the global timeout ever; and we still have the per-test watchdog that
kills an individual test after 40s).
The integration test watchdog fails a test if its recording takes longer
than 40 seconds. Under the race detector everything runs several times
slower, so legitimately slow tests (e.g. a conflicting interactive
rebase) blow that budget and fail even though nothing is actually stuck.
Key the timeout off a build-tag constant: the `race` tag is set
automatically when the binary is built with -race, so a race build gets
a 5x-longer budget while a normal build is unchanged, and the two can't
drift apart the way a runtime flag would. The base 40s stays in one
place; only the multiplier varies by build.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When lazygit exits but leaves behind a subprocess that inherited its
stderr pipe and has detached from the pty, cmd.Wait() blocks in
awaitGoroutines waiting for that pipe to reach EOF -- which never
happens while the straggler is alive. With no WaitDelay set, that wait
is unbounded, so a single leaked process hangs the whole test binary
until the 10-minute global timeout fires and panics. Worse, the timeout
discards whatever lazygit wrote to stderr before exiting (a panic, a
-race report), which is exactly the output needed to diagnose the
failure.
This surfaces under -race, where lazygit runs slow enough to widen the
window for a spawned command to still be alive when lazygit quits, and
it's a blocker for enabling the race detector on CI.
Bound the wait with cmd.WaitDelay so Wait force-closes the pipe and
returns ErrWaitDelay instead of hanging, surface the captured stderr as
the error (falling back to the wait error when nothing was printed), and
kill the child's process group on failure so a straggler can't linger
into a later test or pile up across a run.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When pressing ctrl+z to suspend lazygit, and then `fg` to bring it to
the foreground again, sometimes it wouldn't come to the foreground,
stalling in the background with one core using 100% CPU.
Fixes#5309.
The previous two commits stop gocui from flushing while suspended, but
that guard cannot be fully airtight from gocui's side: it is a
check-then-act on the suspended flag, so a flush racing the suspend
itself (e.g. from a spinner goroutine) could still reach the screen
just as it disengages, and tcell's disengageFinish mutates the cell
buffer without holding the screen lock. Upstream now closes this at
the source (gdamore/tcell#1139): draw() returns immediately on a
disengaged screen, and the draw scan loop can no longer stall on the
width-0 cells that a released cell buffer reports (#5309).
The delta over the previously pinned snapshot is these two fixes, a
CSI R input decode fix, a wasm packaging chore, and dependency bumps.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Until now the repaint after fg was accidental: it only happened because
the suspend keybinding handler still had a flush pending on the UI
thread, and only if that flush happened to run after the SIGCONT
handler had re-engaged the screen. Now that flushes are skipped while
suspended, losing that race would leave the screen blank until the next
input event arrives, so schedule a redraw explicitly (#5309).
When suspending with ctrl+z, the suspend keybinding handler disengages
the screen and then sends SIGSTOP to the process group, so the UI
thread freezes at the return from kill(2) with the handler's follow-up
flush still pending. When fg continues the process, that pending flush
races the SIGCONT handler's Resume. If the flush wins, Show() draws
against the disengaged screen, whose cell buffer tcell has released to
0x0 while its width/height still hold the old size; drawCell() then
reports width 0 for the out-of-range cell, the draw loop's
'x += width - 1' never advances, and the UI thread spins forever while
holding the tcell screen lock. Resume in turn blocks forever on that
lock, so the screen never re-engages and no input is ever read again:
the hard stall of #5309, only recoverable by killing the process.
Guard both flush paths with the suspended flag. For the flag to
guarantee that the screen is engaged whenever it is false, Resume must
clear it only after re-engaging (it used to clear it before); Suspend
already sets it before disengaging. This also covers the pre-existing
unsynchronized suspended check in draw(), which is subsumed by the
guards and can go.
The regression test cannot use the demonstrate-then-fix pattern: on
unfixed code the flush goroutine spins holding the screen lock, which
deadlocks any subsequent screen call including the test cleanup's
Close().
When lazygit is suspended with ctrl+z and brought back with fg, nothing
deliberately triggers a redraw. The screen only repaints because the UI
thread happens to have a flush pending from the suspend keybinding, and
that flush races the SIGCONT handler's resume; when it loses in the
right way, the terminal shows a blank screen until the next input event
arrives (#5309).
Grep-based navigation needs manual filtering for the many colliding
method names in this codebase, while gopls answers reference and
implementation questions type-aware and exactly. Scope the guidance to
the symbol tools and keep grep for textual searches: gopls' own MCP
instructions prescribe running vulncheck at session start and
go_file_context after every file read, which costs more than it helps
here. The server is registered per user and machine, so sessions
without it must just fall back to grep rather than try to set it up.
The command log is supposed to show only commands initiated by the user;
these are commands that we run to get information for rendering, so they
pollute the log and are confusing.
Fix two problems that would prevent switching repos or worktrees while a
background fetch was running, especially when the network is very slow
and the fetch takes long. See commit messages for details.
Labelling as ignore-for-release because it fixes a regression that was
introduced after the last release.
Each status used to start a spinner render loop of its own, running on
a worker that inherited the foreground/background flavor of the
status's owner, and exiting only once the entire status stack was
empty. That shape had a real bug: a foreground operation's loop could
be kept alive by someone else's status. Finish a quick operation with
a waiting status while a background fetch's "Fetching..." status is
still showing, and the operation's render loop — a foreground worker
task — keeps ticking until the fetch ends. Busy() stays true for that
whole time, so repo switching is refused even though nothing is in
flight anymore; with a fetch hanging on a slow network, that means
minutes. The shape was also wasteful: overlapping statuses were each
drawn by their own loop (plus a duplicate whenever a task was paused
and resumed while another status was showing), all redundantly
redrawing the same top status.
Replace the per-status loops with a single loop owned by the status
stack as a whole: whoever shows the first status starts it, and it
exits after drawing a final empty frame once the last status is
removed. The claim/release methods on StatusManager keep the loop
flag's transitions atomic with the stack under the one mutex, so a
status added while the loop is about to exit starts a fresh loop
instead of going unrendered.
The loop always runs as a background task now: rendering issues no
git commands, so it never needs to block repo switching, and a
foreground operation's busy-ness is already carried by its own worker
task. This is what fixes the bug above, and it retires the need to
thread a foreground/background flag through the waiting-status
helpers altogether.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The http.Client used for fetching pull requests had no timeout, so on a
network that silently drops packets a request could stay in flight
until the OS-level TCP timeouts kick in, which can take many minutes.
The fetch has no visible status, so nothing tells the user it is still
running; bounding it keeps the refresh's worst case short, and the next
refresh simply tries again.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Every full refresh includes the PULL_REQUESTS scope, and the worker it
spawns inherited the refresh's foreground/background flag. Full
foreground refreshes happen at startup, after switching repos or
worktrees, and when the terminal regains focus, so the GitHub API
request ran as a foreground task there, keeping Busy() true until it
completed. On a healthy network that's a few hundred milliseconds and
nobody notices; on a very slow one the request can stall for minutes,
and every attempt to switch repos in that window was refused with
"Can't switch repositories while an operation is in progress" even
though lazygit looked completely idle. (The request has no visible
status; at most, a background fetch hanging on the same bad network was
showing its "Fetching..." spinner, pointing the blame at the wrong
operation.)
The switch-safety guard only needs to wait for operations whose
remaining git commands would run against the wrong repo after a switch.
The pull-request fetch runs no git commands at all, and its model
writes are dropped when the repo generation has changed in the
meantime, so there is no reason for it to block switching.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Several fixes for the last concurrency problems we still had: we used to
access view properties on worker threads, which isn't allowed (writing
to a view itself is fine and guarded by a mutex, but other fields are
not, and even that mutex had a few holes that are plugged here).
With this, our integration test suite seems to be fully deterministic
and race-free, so we also remove the retry safety net (MaxAttempts=2)
that we were using to address flakiness.
Now that we solved all known concurrency issues and our tests should be
100% deterministic, reduce MaxAttempts to 1 so that tests fail
immediately. We don't want to paper over existing flakiness any more.
The bounce model requires that a worker never touch UI-thread-owned
state: it should capture what it needs on the UI thread and pass that
in. Guard the two central accessors -- Model() (the git model) and
Context() (the context manager, which owns the mutable
current-context/stack) -- with a debug-only panic when they're called
off the UI thread. Since the integration tests run with -debug, a stray
worker access now fails deterministically and points at itself, rather
than surfacing later as a probabilistic data race.
One supporting change make the assertion usable: the integration test
driver inspects gui state from the test goroutine, so
GuiDriver.CurrentContext reads the context manager directly rather than
through the now-guarded c.Context().
Contexts() (the registry of context objects) is deliberately left
unguarded: workers legitimately fetch a context to grab its mutex or
check identity, so a blanket assertion there would flag safe accesses.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
hasExecTodos reads Model().Commits. genericMergeCommandImpl evaluates it
when deciding whether to use a subprocess, and on the recursive auto-skip
path that runs on a worker -- so the read raced the UI thread. Bounce it
onto the UI thread there, keyed off the calledFromWorker flag the function
already carries (on the UI-thread entry path the read stays inline).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The file-path suggestions trie is rebuilt asynchronously and then read by
the suggestions search, which runs on an AsyncHandler worker. It lived in
Model().FilesTrie, so that worker read the (UI-thread-only) model. Move
it to an atomic pointer on the SuggestionsHelper instead: it's the only
place that uses it, the helper is recreated per repo (so the cache still
resets on a repo switch), and an atomic pointer is safe to store from the
build and load from the search worker.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The "merge conflicts" refresh scope ran on a worker like the others, but
unlike them it does UI work rather than git work: RefreshMergeState reads
the current context and renders (or escapes) the merge-conflicts view.
Reading the context manager and rendering from a worker races the UI
thread. Bounce it onto the UI thread with onUIThreadUnlessRepoChanged,
exactly as the staging and patch-building scopes already do.
Running on the UI thread also lets EscapeMerge push the files context
directly instead of deferring the push to a separate UI task; it only
needs to drop the merge-conflicts mutex first, because the push
renders the newly focused file, which can take the mutex again. The
deferred push could lose a race against the same refresh's prompt to
continue the rebase/merge: if the prompt opened between
RefreshMergeState and the deferred push, the push declined to cover
the popup and was dropped, so closing the prompt landed the user in
the emptied merge conflicts view.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
RefreshSuggestions dispatched to an AsyncHandler worker that read
State.FindSuggestions and the prompt's TextArea (via GetPromptInput)
from the worker goroutine. The main thread rewrites both in
preparePromptPanel when it (re)creates a prompt panel, so an in-flight
suggestions worker races those writes -- two data races surfaced under
-race (filter_by_path/reword_commit_in_filtering_mode).
Capture both on the UI thread (RefreshSuggestions is only ever called
from UI-thread handlers) before dispatching to the worker. This is also
more correct: we search for the input as it was when dispatched, which
is what this request's AsyncHandler id corresponds to.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Dropping a range of stashes ran a refresh after each drop. A refresh
issued from the UI thread does its git work on a worker and applies the
model update in the background, so firing one per iteration let the
workers race: an earlier drop's refresh (which read a stash list that
still contained a later-dropped entry) could apply its result last,
leaving the stash view showing an entry that git had already removed.
Refresh once, after all the drops, so a single worker reads the final
stash list. The indices are captured up front and dropped highest-first,
so the remaining lower indices stay valid without an intervening
refresh. It's also cheaper: one `git stash list` instead of one per
entry.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
moveMainContextToTop copies the current top view's content into the view
it's promoting, to avoid a flicker. The source can be a main view with a
live streaming task (e.g. resolving a conflict promotes the merge-conflicts
view over a main view that's mid-diff), and CopyContent both read and
published that source's buffer unsafely:
- it read the source's lines/viewLines while locking only the
destination, racing the task's concurrent Write; and
- it aliased the source's row slices into the destination, so the
source's ongoing appends (growslice reading the shared array) and
refreshViewLinesIfNeeded's in-place wrapping-cache writes (&lines[i])
kept racing this view's rendering after the copy.
Lock the source for the read, and shallow-clone the row slices so the
destination gets its own arrays. The per-row cell data is immutable once
written, so it stays shared -- the clone cost is proportional to the
number of rows, not their contents.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The patch-building scope ran RefreshPatchBuildingPanel directly on the
refresh worker, where it read the commit-files selection and set the patch
view's origin off the UI thread — the latter raced the UI thread's draw.
Bounce it onto the UI thread, exactly as the staging panel just above
already does, guarded on the generation so a repo switch drops it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The custom-patch git operations (move/pull/delete patch, and their rebase
continuations) run on worker goroutines and call PatchBuilder.Reset when
they've consumed the patch, clearing To and the fileInfoMap. Meanwhile the
UI thread reads that state every layout — the options bar and the mode
indicator both call Active() — so the reset raced the render.
Add a mutex. The map's entries are only ever touched on the UI thread, so
the lock only has to serialize the To field and the fileInfoMap pointer:
readers snapshot the pointer under the lock and iterate the local, and
getFileInfo drops the lock across its git diff I/O rather than holding it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The test harness enqueued ErrQuit after a test finished, waited for the
program to go idle, then slept a fixed second and declared "gocui should
have already exited" if it hadn't. That fixed grace is fragile: under the
race detector the shutdown legitimately takes longer than a second, so
nearly every test failed with that message even though nothing was wrong.
Wait for the main loop to actually return instead. gocui now closes a
loopExited channel when MainLoop exits, and the harness blocks on it; the
existing 40s watchdog still fails a test whose loop genuinely never quits.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
PopupMutex guarded CurrentPopupOpts against a popup being created on a
worker goroutine while the UI thread deactivated it, or reset it on a
repo switch. Now that popup and menu creation is bounced onto the UI
thread, every access to CurrentPopupOpts — create, deactivate, and the
reset-on-switch (which already runs on the UI thread) — happens on the
one goroutine, so the mutex protects nothing.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Raising a popup or menu pushes a context and mutates the popup views, so
it must happen on the UI thread. But it can be triggered from a worker
goroutine — for example a WithWaitingStatus handler that hits a merge
conflict and calls PromptForConflictHandling, or a worker that shows a
confirmation — where it raced the UI thread's layout and draw code.
Bounce the creation onto the UI thread at the one point where the popup
and menu producers are injected into the popup handler, so every caller
stays oblivious to the threading. For a caller that is already on the UI
thread this adds no delay: the main loop drains the enqueued closure in
the same event-processing cycle, before it draws.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When a command task reaches EOF it runs onEndOfInput, which reads the
view's line height (and thus its dimensions) to decide whether to scroll,
sets the view's origin, and flushes stale cells. Reading the dimensions
and setting the origin are UI-thread-only, but this ran on the task's own
goroutine, racing the UI thread. Bounce onEndOfInput onto the UI thread,
as we already do for the new-task origin reset. It's once per render, so
it doesn't add the per-line UI-thread churn that streaming the content
would.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A view's line buffer, its viewLines/tainted flags, and its hover state
are all written from the command-task goroutine (under writeMutex) as it
renders. But three accessors reached that same state from the UI thread
without the lock: SetView and the GUI-resize path cleared a view's lines
directly, viewsToRedrawContentOnly read the tainted flag, and Buffer read
the line buffer. Each raced a rendering task.
Guard them with writeMutex, matching the view's other buffer accessors.
These are reads/clears of state writeMutex already protects, not new
callers of it -- the view's geometry stays outside the mutex.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A command task streams its output into a view from its own goroutine. To
track soft-wraps (so cursor-positioning escapes from a pager land on the
right line) the write path read the view's live InnerWidth, and the pty
setup read its InnerSize -- both off the UI thread, racing the UI thread
mutating the view's dimensions during layout.
Capture the width on the UI thread instead and hand it to the task: the
escape interpreter keeps a screenColMax it reads from, seeded in NewView
and refreshed per render via View.SetContentWidth (called from
newCmdTask/newPtyTask before the task's goroutine starts), and the pty
size is computed in the after-layout callback rather than in the task's
start func. The view's dimensions stay UI-thread-only; the task uses the
snapshot rather than reading them live.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The throttle flag is set from the goroutine that watches a task for
being stopped, and read when the next task starts up -- two different
goroutines, so the plain bool field was a data race.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The readLines channel, by which a running task is told to read more
lines as the user scrolls, is swapped out as tasks start and finish. It
was a plain field written from the task goroutines (when a task starts,
ends, or is replaced) and read from the UI thread in ReadLines/
ReadToEnd, so those accesses raced -- a longstanding data race (and a
plausible cause of the occasional "main view stops updating" hang, since
a torn read there could drop a scroll's read request).
Make the field an atomic.Pointer and give the running task a captured
local copy of the channel for its own send/receive, so the field itself
is only ever loaded/stored atomically. No lock is involved, so there's
nothing to untangle later.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When a task renders different content to a view (a new task key), the
view's scroll origin is reset to the top via onNewKey. That ran on the
task's own goroutine, racing the UI thread, which reads the origin
(OriginY) while laying out and drawing the view -- the single largest
source of view-render data races.
Give ViewBufferManager a bounce primitive (onUIThread) that runs a
function on the UI thread and waits for it, and reset the origin through
it. This is the first use of the primitive; subsequent commits route the
rest of the task's view mutations through it too, so that the view is
only ever touched on the UI thread. It runs as background work
(OnUIThreadAndWaitBackground) so rendering doesn't count towards the app
being busy, matching how the render's gocui task is already created.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The closures that render static content to a main view (newStringTask
and friends) ran on the ViewBufferManager's task goroutine, calling
SetViewContent/SetOrigin/ResetViewOrigin directly on the view. Those
touch view state (the line buffer, hover cells, the origin) that the UI
thread concurrently reads and mutates while laying out and drawing, so
they raced it -- e.g. a string task's SetContent clearing the view's
lines while the UI thread's CopyContent read them, or its SetOrigin
racing the layout's OriginY read.
Bounce the whole closure onto the UI thread instead, so the view is only
touched there. The bounce blocks (OnUIThreadAndWaitBackground) so the
task still completes only once the content has actually been rendered,
which the integration-test idle detection relies on; the background
variant keeps it from counting towards the app being busy, matching the
existing treatment of view rendering as work that must not block a repo
switch.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
We used to run some refreshes with a BLOCK_UI mode that causes it to run
on the main thread, blocking it. The two main reasons for doing this
were that in some cases we want the UI to update all at once, rather
then each panel when it's done refreshing (and in particular also render
a selection change in sync with the list update, e.g. when checking out
a branch, where the checked-out branch moves to the top and gets
selected there), and that we wanted to block keyboard input while the
refresh was running (so that people who like to work fast can "type
ahead"; e.g. press `e` to start an interactive rebase, and then `up` and
`d` to set the next rebase todo to dropped).
There were two problems with this: it blocked UI updates, so for
checking out a branch the status spinner would spin while the git
checkout command is running, but then freeze while the refresh was
running, which looked ugly; and also, for the "type ahead" scenario it
isn't enough to block events only while refresh runs, but we'd have to
block them during the entire operation.
This PR makes several improvements to this mechanism:
- it separates the two concerns: updating the UI all at once is a
separate RefreshOptions flag that can be set regardless of refresh mode,
and blocking keyboard input is a separate mechanism independent of
refresh. The two will often be used together, but don't have to.
- remove the special WithWaitingStatusSync mode that we used for cases
where "type ahead" support is especially important (mainly moving a
commit up/down): this used to work synchronously on the UI thread to
ensure that input is blocked, and used a special mechanism to still draw
the spinner. We don't need this any more now that we can block input
while doing the work on a background thread.
- get rid of the refresh mode (SYNC/ASYNC) altogether. We have had
separate Refresh/RefreshFromWorker calls for a while now (since #5767),
and the rule now is that all RefreshFromWorker calls are sync and all
Refresh calls are async.
Fetching pull requests can take a long time, and we don't want to delay
the refresh by it; in particular, for a WithWaitingStatusBlockingInput
we want the UI thread to be unblocked again while pull requests are
still fetching in the background. This is similar to how we fetch the
behind values for branches in BranchLoader; this will update the UI
without much flicker when done, and doesn't have to block anything.
The two branches of the `refresh` closure ran the scope function
identically; they differed only in that the UI-thread path registered
each scope as its own gocui task while the worker/demo path used a bare
goroutine (and only the latter logged per-scope timing).
Those per-scope tasks were redundant. performRefresh always runs under a
task that stays busy until the wg.Wait in waitAndFinalize joins every
scope goroutine: the calling worker's own task when called from a worker,
or the waitAndFinalize worker task when called from the UI thread — and
that task is created (busy) before the triggering event's task goes Done,
so there is no window in which nothing is busy. Repo-switch safety and the
integration-test idle signal are therefore already covered without giving
each scope its own task.
Collapsing to the single goroutine path also means the timing log now
fires for UI-thread refreshes too, not just worker ones.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Nothing calls it anymore now that the commit-surgery operations run on a
worker with input blocked. Remove the helper, its bespoke synchronous
spinner loop (renderAppStatusSync/setAppStatusContent), the popup-handler
plumbing, and the interface method.
That loop was also the only thing suppressing the yellow "Rebasing" mode
indicator (and its reset button) while lazygit drives a rebase itself.
Move that suppression to WithWaitingStatusBlockingInput so it applies to
every input-blocking commit-surgery op — including the ones that already
ran on a worker (edit, drop, and so on) and previously let the indicator
flash on mid-operation. It's cleared after the refresh, so an operation
that legitimately leaves a rebase in progress still shows the mode.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
With the last synchronous commit-surgery callers moved to workers,
nothing runs CheckMergeOrRebase on the UI thread anymore, so
CheckMergeOrRebaseWithRefreshOptionsFromUIThread has no callers. Remove
it and fold the shared checkMergeOrRebaseImpl back into
CheckMergeOrRebaseWithRefreshOptions, which is now always on a worker.
The runAction closure loses its calledFromWorker parameter for the same
reason.
genericMergeCommandImpl keeps its calledFromWorker flag: the
merge/rebase-continue subprocess path still runs on the UI thread when
invoked straight from the menu, and on a worker for the recursive
auto-skip.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
edit, quick-start rebase, drop, reword, squash, fixup, amend
(including the amend-attribute author operations) and
discard-file-from-commit all run a rebase on a worker. A key pressed
while one is in flight could act on a stale commit or todo — pressing e
to start an interactive rebase, then up+d before it finishes, is the
motivating example. Switch them from WithWaitingStatus to
WithWaitingStatusBlockingInput so input is held and replayed against the
post-operation state, matching the commit-surgery ops that were already
sync.
Left alone: the custom-patch move/delete/pull-into-commit rebases (no
need to block input while building and applying a patch), the
loading-more-commits and patch-building toggle spinners (no rebase to
disrupt), and fetches and other non-surgery operations where blocking
navigation would only get in the way.
Move, revert, squash-fixups, create-fixup and cherry-pick paste ran
their rebase synchronously on the UI thread via WithWaitingStatusSync,
which froze the UI for the duration but kept the user from disrupting the
operation with a stray keypress. Switch them to
WithWaitingStatusBlockingInput so the git work runs on a worker — the UI
keeps rendering and the spinner animates — while input stays blocked for
the whole operation, as before.
discard-patch-from-commit also moves off WithWaitingStatusSync, but as a
plain WithWaitingStatus: it's a custom-patch command, and those don't
block input.
The bodies now follow the worker conventions: model state they need is
captured on the UI thread before dispatching, self.c.Refresh becomes
RefreshFromWorker, and CheckMergeOrRebase uses the worker variant. An
operation that moves the selection does so in the refresh's Then, so it
lands in the same frame as the refreshed commit list; squash sets it as
an absolute index there, because the shorter list would clamp a relative
move.
It reads the selected index and the commits and branches models to
decide where to move the fixup commit. Take those as parameters,
captured on the UI thread by the callers, so the function can run its
rebase on a worker without reading the model there. No behavior change;
the callers still run on the UI thread for now.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bracket gocui's BeginBlockingEvents/EndBlockingEvents around a
worker operation that shows a waiting status. The block is begun
synchronously on the UI thread, before the operation is dispatched to a
worker, so no keypress can slip through in between; it ends via
OnUIThread once the operation and its refresh have applied their UI
updates, so the replayed keys act on the refreshed state.
This composes what the retiring WithWaitingStatusSync did — show a
status and block input — but on a worker, so the UI keeps rendering
(spinner animates, model updates land) instead of freezing. Callers
follow in subsequent commits.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Long-running operations that lazygit drives itself (rebases, and the
commit surgery built on them) can be corrupted by keys the user presses
while they run: pressing e to start an interactive rebase, then up+d
before it finishes, must act on the resulting todo list, not race the
rebase. WithWaitingStatusSync gets this today only as a side effect of
freezing the UI thread, which the rest of this branch is moving away
from.
Add a nestable counter, BeginBlockingEvents/EndBlockingEvents, that
withholds input at the event-dispatch layer without freezing anything:
while blocked, key events are buffered and replayed in order once the
count returns to zero (so they act on the now-current context), mouse
clicks and hover are dropped (replaying them against a changed layout
would target the wrong thing), and scrolling, resize, focus and all
rendering keep flowing. These are the reusable core; a gui-level helper
that brackets them around a worker operation follows.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
With sync vs async now derived from the calling thread, the Mode field
and its SYNC/ASYNC constants no longer carry any information: Refresh is
always async, RefreshFromWorker always sync. Drop the field, the type,
and the Mode argument at every call site, and reduce the debug log's
mode name to a plain sync/async derived from calledFromWorker.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Whether a refresh should block or run in the background was controlled
by the Mode field, but that always lined up with the calling thread: a
UI-thread Refresh must not block the UI, while a RefreshFromWorker runs
on a worker where blocking is exactly what we want. Now that Then and
BatchUIUpdates work regardless of that choice, drop Mode from the
decision and key it off calledFromWorker instead:
- Refresh (UI thread) runs its scopes and the finishing step (wait,
batch flush, Then) on workers, so the caller returns immediately —
what ASYNC used to mean.
- RefreshFromWorker runs them on the calling worker, blocking it until
everything is done — what SYNC used to mean.
Demos keep taking the blocking, inline path so everything still lands in
one deterministic frame.
In practice this flips the handful of RefreshFromWorker calls that
passed ASYNC — they now block their worker until the refresh finishes,
keeping the waiting-status spinner up until the UI actually updates —
and the many UI-thread refreshes that defaulted to SYNC, which no longer
freeze the UI thread while the git work runs. Mode now only feeds the
log line; the next commit removes it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Creating a branch checks it out, and checking out a distant ref (a tag
or a commit far from HEAD) can take a noticeable while. NewBranch ran
that synchronously in the prompt's confirm handler, on the UI thread, so
the UI froze — no spinner, no repaint — until it finished.
Move the branch creation (and the autostash path) onto a worker with a
waiting status, mirroring CheckoutRef, and refresh from the worker so
the UI thread stays live and the spinner keeps animating.
Push the branches context from the refresh's Then rather than up front:
the refresh already batches its UI updates, so switching panels there
lands the switch in the same frame as the refreshed branch list instead
of flashing the pre-refresh list while the checkout is still running.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Then, and BatchUIUpdates, previously only worked for a SYNC refresh: the
calling goroutine blocked in wg.Wait until every scope had finished, and
only then flushed the batch and ran Then. An ASYNC refresh had no such
join point — it dispatched each scope onto its own worker and returned
right away — so Then was forbidden (it would have run before the scopes
finished) and a batch would never be drained.
Give the async path a join of its own. Both paths now register their
scopes in the WaitGroup, and the finishing work — wg.Wait, the batch
flush, and Then — moves into a closure. A SYNC refresh runs it inline as
before; an ASYNC refresh dispatches it to a worker, so the caller still
returns immediately but the batch and Then run once every scope is done.
Besides lifting the restriction, this makes SYNC and ASYNC differ only
in whether the finishing work blocks the caller, which is what lets a
later commit drop the mode entirely and key the choice off the calling
thread instead.
There is no f() function any more, so a variable named "f runs on"
doesn't make sense. And we also don't need it any more; it used to be
necessary when its meaning was not exactly the same as
`!calledFromWorker`, but also included the BLOCK_UI case, but that has
changed several commits ago.
This was useful when there was a BLOCK_UI mode where f() was called
differently, but now we no longer need it. I'm making this change as a
separate commit because folding it into the previous one (which would
conceptually have made sense) would have made that diff unreadable
because of the indentation change.
The variable `fRunsOnUIThread` and its comment no longer make sense now;
we'll clean this up next.
The diff is best viewed with --ignore-all-space.
BLOCK_UI ran the whole refresh on the UI thread and parked it in a
wg.Wait for the duration, so the UI (and its spinner) froze while the
git work ran. Blocking the UI was never the point — the point was to
apply all the scopes' updates in one frame instead of a per-scope
cascade — and if we genuinely wanted to block input it should span the
whole operation, not just its refresh, which needs a gocui-level
mechanism we don't have.
So drop the mode and add a BatchUIUpdates option that achieves the
"one frame" effect without blocking: each scope's UI-thread bounce is
collected into a shared refreshBounceBatch during the refresh, and once
every scope has finished they're all applied inside a single OnUIThread
task. gocui drains every queued event before it redraws, so one task
means one repaint. The refresh itself now runs SYNC — on a worker when
issued from one (checkout, move-to-new-branch, the rebase-edit result
handling), so the UI thread stays live and the spinner keeps animating.
The batch needs a mutex because the scopes add concurrently from their
worker goroutines, and a closed flag so that any bounces enqueued after
the flush starts — the nested ones a flushed bounce produces in turn,
e.g. scrolling the selection into view — are dispatched immediately as
ordinary follow-ups rather than collected into a batch that nothing
will drain.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Agents (and humans new to the repo) repeatedly go looking for the gocui
sources in go.mod, go.sum, or the module cache and hit a dead end, because
gocui is a fork maintained in-tree under pkg/gocui rather than pulled in as
a dependency. Record that in AGENTS.md so the dead end is avoided.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Serialize concurrent writes to the streamed command's output writer.
`runAndStreamAux` funnels a command's stdout and stderr into a single
`cmdWriter` (the command-log panel, or a buffer when output is
suppressed) from two separate goroutines: stderr through the MultiWriter
set on `cmd.Stderr`, and stdout through the `onRun` callback. Those
goroutines
wrote the shared writer without any synchronization, racing on the
prefixWriter's `prefixWritten` flag and interleaving the two streams.
Wrap the writer so its writes are serialized.
runAndStreamAux reads the stdout buffer (and, when output is suppressed,
the combinedOutput buffer) for its error message after handler.wait()
returns, but the goroutine that fills those buffers by draining the
command's output isn't awaited, so the reads raced its final writes.
Own the goroutine here rather than letting the onRun callbacks spawn it,
and join it before reading the buffers. The pty reader reaches EOF on its
own once the process exits, but the non-pty pipe never does, so its
handler now closes the read end to unblock the reader; the pipe is
synchronous, so by the time the command has exited all of its output has
already been read and nothing is lost. This also plugs the goroutine that
the non-pty streaming path previously leaked on every command.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
runAndStreamAux funnels a command's stdout and stderr into a single
cmdWriter (the command-log panel, or a buffer when output is suppressed)
from two separate goroutines: stderr through the MultiWriter set on
cmd.Stderr, and stdout through the onRun callback. Those goroutines
wrote the shared writer without any synchronization, racing on the
prefixWriter's prefixWritten flag and interleaving the two streams.
Wrap the writer so its writes are serialized.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The transient contexts (remoteBranches, subCommits, commitFiles) take
over the window of the context they are drilled into from, but until
then they carry a hardcoded initial window ("branches" or
"commits"). Under a gui.sidePanels config where those tabs aren't
their panel's first, no window of that name exists, leaving the
window-to-view map with entries for windows the layout never
produces. The previous commit made such entries harmless, but there's
no reason to have contexts point at nonexistent windows in the first
place; assign them the window hosting branches or commits instead,
which the config validation guarantees to exist.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
With gui.sidePanels, a panel's gocui window is named after its first
tab, so when branches is grouped behind, say, worktrees, there is no
window called "branches" at all. The transient contexts
(remoteBranches, subCommits, commitFiles) initially point at the
windows "branches" and "commits", and layout() showed their views
whenever the window-to-view map named them as their window's current
view — without checking that the window exists in the layout. Since
the map is seeded from the contexts themselves, a window that no
panel owns keeps naming a transient view as its current view, and
that view had just been parked at full screen size (the fallback for
views in unlaid-out windows), so it covered every side panel below it
in z-order.
Only show a transient view if its window actually received dimensions
in this layout.
Fixes#5823.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
With gui.sidePanels, a panel's gocui window is named after its first
tab. The transient contexts (remoteBranches, subCommits, commitFiles)
initially point at the windows "branches" and "commits"; when the
config gives no panel that name, their views end up visible at full
screen size, covering every side panel below them in z-order (issue
#5823).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
tcell's filterEvents goroutine sends events into eventQ with a plain
blocking send, while Fini (via finish/finalize) closes eventQ after
closing the quit channel. The goroutine can have already committed to
the ev = <-inQ select arm when quit is closed, so its send into eventQ
races with the close; the race detector flags this (send and close on
the same channel are unsynchronized), and if the close wins, the send
panics with "send on closed channel".
This was caught by the integration tests under the race detector, where
every test drives a real tScreen over a MockTerm and tears it down via
Fini, but it equally affects real-terminal shutdown.
Upstream fixed it in 243630d2 ("Fix screen Init/Fini races") by tracking
the filter goroutine in a WaitGroup that finalize waits for before
closing eventQ, and guarding the send with a select on quit. That commit
is not in a tagged release yet (latest is v3.4.0), so pin the
pseudo-version; the delta over v3.4.0 is just this fix, a Windows
key-release fix, a cell-rendering perf tweak, and dependency bumps.
tcell's filterEvents goroutine sends events into eventQ with a plain
blocking send, while Fini (via finish/finalize) closes eventQ after
closing the quit channel. The goroutine can have already committed to
the ev = <-inQ select arm when quit is closed, so its send into eventQ
races with the close; the race detector flags this (send and close on
the same channel are unsynchronized), and if the close wins, the send
panics with "send on closed channel".
This was caught by the integration tests under the race detector,
where every test drives a real tScreen over a MockTerm and tears it
down via Fini, but it equally affects real-terminal shutdown.
Upstream fixed it in 243630d2 ("Fix screen Init/Fini races") by
tracking the filter goroutine in a WaitGroup that finalize waits for
before closing eventQ, and guarding the send with a select on quit.
That commit is not in a tagged release yet (latest is v3.4.0), so pin
the pseudo-version; the delta over v3.4.0 is just this fix, a Windows
key-release fix, a cell-rendering perf tweak, and dependency bumps.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
When the last conflict of a file is resolved, a files refresh both
offers to continue the rebase/merge (if we started it ourselves) and,
via its merge-conflicts scope, escapes from the merge conflicts view
back to the files context. The two race: the prompt is bounced onto the
UI thread by the files worker, while the escape's context push is queued
separately by EscapeMerge, and it deliberately refuses to push the files
context over a popup. So if the prompt opens first, the escape does
nothing, and closing the prompt lands the user in the stale merge
conflicts view — usually already emptied by the escape's state reset —
instead of the files panel. No later refresh rescues this.
Fix this by escaping from the merge conflicts view right before opening
the prompt. This runs on the UI thread and doesn't hold the merge
conflicts mutex, so it can reset the state and push the files context
synchronously; whichever side runs first, the prompt now always opens on
top of the files context, and EscapeMerge's guarded push still does
nothing only when that's the right thing to do.
This is a timing race with no deterministic regression test; it showed
up as a rare flake in tests that cancel the continue prompt (e.g.
commit/amend_when_there_are_conflicts_and_continue) when looping the
integration tests under the race detector.
When the last conflict of a file is resolved, a files refresh both
offers to continue the rebase/merge (if we started it ourselves) and,
via its merge-conflicts scope, escapes from the merge conflicts view
back to the files context. The two race: the prompt is bounced onto
the UI thread by the files worker, while the escape's context push is
queued separately by EscapeMerge, and it deliberately refuses to push
the files context over a popup. So if the prompt opens first, the
escape does nothing, and closing the prompt lands the user in the
stale merge conflicts view — usually already emptied by the escape's
state reset — instead of the files panel. No later refresh rescues
this.
Fix this by escaping from the merge conflicts view right before
opening the prompt. This runs on the UI thread and doesn't hold the
merge conflicts mutex, so it can reset the state and push the files
context synchronously; whichever side runs first, the prompt now
always opens on top of the files context, and EscapeMerge's guarded
push still does nothing only when that's the right thing to do.
This is a timing race with no deterministic regression test; it
showed up as a rare flake in tests that cancel the continue prompt
(e.g. commit/amend_when_there_are_conflicts_and_continue) when
looping the integration tests under the race detector.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Running the integration tests in a loop under the race detector
eventually hung in demo/bisect. The goroutine dump shows the cycle: a
background worker's task.Done() held the task manager's mutex while
blocking on the unbuffered idle-listener channel send, and the test
runner goroutine — the only reader of that channel — was itself blocked
in NewTask on that same mutex, on its way to enqueueing a caption render
(SetCaption -> Render -> OnUIThread). Neither side could proceed: the
notification couldn't be delivered until the test goroutine got the
mutex, and the mutex couldn't be released until the notification was
delivered.
The root problem is that the busy-to-idle notification is a blocking
rendezvous performed while holding the mutex, so it needs the waiter's
cooperation at a moment where the waiter may legitimately need the mutex
first.
Make the notification fire-and-forget instead: WaitUntilIdle waits on a
condition variable and re-checks "is any task busy?" under the mutex,
and the busy-to-idle transition broadcasts, which never blocks. Waiting
is now level-triggered rather than edge-triggered, which is also more
robust: a wait can no longer be satisfied by a stale idle transition
produced by an unrelated background task, because the predicate is
evaluated against the current state. This relies on the previous commit
having made replayed input events carry their task from submission;
without that, the wait could return in the window where an event is in
flight but not yet picked up by the main loop.
Running the integration tests in a loop under the race detector
eventually hung in demo/bisect. The goroutine dump shows the cycle: a
background worker's task.Done() held the task manager's mutex while
blocking on the unbuffered idle-listener channel send, and the test
runner goroutine — the only reader of that channel — was itself blocked
in NewTask on that same mutex, on its way to enqueueing a caption
render (SetCaption -> Render -> OnUIThread). Neither side could
proceed: the notification couldn't be delivered until the test
goroutine got the mutex, and the mutex couldn't be released until the
notification was delivered.
The root problem is that the busy-to-idle notification is a blocking
rendezvous performed while holding the mutex, so it needs the waiter's
cooperation at a moment where the waiter may legitimately need the
mutex first.
Make the notification fire-and-forget instead: WaitUntilIdle waits on a
condition variable and re-checks "is any task busy?" under the mutex,
and the busy-to-idle transition broadcasts, which never blocks. Waiting
is now level-triggered rather than edge-triggered, which is also more
robust: a wait can no longer be satisfied by a stale idle transition
produced by an unrelated background task, because the predicate is
evaluated against the current state. This relies on the previous commit
having made replayed input events carry their task from submission;
without that, the wait could return in the window where an event is in
flight but not yet picked up by the main loop.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Integration tests synchronize with lazygit through the task manager:
after submitting an input event, the test driver waits until the
program goes idle before asserting. But a submitted event only got its
task once the main loop picked it up from the events channel; while it
was still in flight (handed to the poller goroutine, or sitting in the
channel), no task existed for it, so the program could look idle even
though input was still pending.
The edge-triggered idle protocol mostly papers over this: each wait is
satisfied by the *next* busy-to-idle transition, which in practice is
the one produced by processing the submitted event. It only goes wrong
when some other task (e.g. a background refresh) completes in that
window, producing an edge the waiting test mistakes for its own — a
rare source of test flakes. The next commit replaces that protocol
with a level-triggered one, for which the window would be fatal rather
than rare: a wait falling into the gap would return immediately.
Close the gap by creating the task on the test goroutine before the
event is submitted, and carrying it through the poller into the main
loop, which uses it instead of creating its own. The new Replay*
methods own this invariant, and the replayed-events channels are no
longer exported, so tests can't submit an untracked event.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A following commit needs pollEvent to attach information from the
replayed-event wrappers to the GocuiEvent it returns. With the
conversion inlined there is no seam to do that in, because every branch
of the type switch returns directly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Resolve the pkg/gocui/gui.go conflict by keeping master's background-task
structure (Update/update(background), taskManager) and applying the
unbounded user-event queue on top — the same end state as if the fix had
been written on master directly.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This is useful for cutting a patch release for the previous version when
master already contains work that shouldn't be released yet.
Scheduled runs are unaffected: with no input provided, the ref is empty
and the checkout falls back to the default branch.
I keep getting slightly confused as to which is which, so make this
extra clear.
While at it, change the default to minor, this is the option that is
more often used now that we don't have regular scheduled releases any
more.
This is useful for cutting a patch release for the previous version
when master already contains work that shouldn't be released yet; for
example, v0.63.1 had to be tagged and released by hand from a v0.63.1
branch off the v0.63.0 tag because the workflow could only release
master.
Scheduled runs are unaffected: with no input provided, the ref is
empty and the checkout falls back to the default branch.
When creating a patch release from a branch called `v0.63.1`, the new
tag would get the same name and pushing it would fail with `error: src
refspec v0.63.1 matches more than one`.
The Get Latest Tag step used to pick the most recently created tag in
the entire repo, regardless of whether it is reachable from the commit
being released. In preparation for supporting releases from branches
other than master, use the nearest tag that is an ancestor of the
checked-out commit instead. This way, a patch release cut from an
older release branch bumps that branch's own latest tag even when
master already carries a newer release, and the "changes since last
release" check compares against the release that actually precedes
this one in history.
The Windows PTY support that was newly introduced in v0.63.0 had a
potential deadlock problem: when switching between longer diffs, lazygit
could lock up. This should hopefully be fixed with this PR.
winPty.Close could block indefinitely, and it is called while holding
the global PtyMutex and while the task's onDone sync.Once is
executing, so blocking there wedges the task's entire cleanup chain:
the next NewTask call blocks on <-notifyStopped while holding
waitingMutex, every later task for that view queues up behind it, and
onResize blocks on PtyMutex — a full UI freeze. (Reported by a user
via go-deadlock's 30s watchdog; a regression from the ConPTY support
introduced for v0.63.0.)
ClosePseudoConsole is what blocks; before Windows 11 24H2 it can do
so in two ways. It flushes the client's pending output into the out
pipe, but a stopped task's scanner goroutine has already quit
draining, so with a client that's still producing output the flush
never completes; this can also wedge the background waiter's
closeHpc, which runs with the pipes deliberately left open. And it
waits for the console host to exit, but closing only delivers
CTRL_CLOSE_EVENT to the attached client without terminating it, so a
client that keeps running (git still computing an expensive diff, a
pager waiting for input) keeps the host alive arbitrarily long.
Run the teardown on a background goroutine so Close returns
immediately no matter which of these strikes, and within it close our
pipe ends before the pseudoconsole, without taking p.mu: breaking the
pipes fails a pending flush fast, which also unblocks a waiter
already stuck in one.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
In #5756 we changed the userEvents channel to a fixed 256-slot channel
with a non-blocking send that panicked when the channel was full. It
turns out that this panic can happen in real use:
- Toggling a directory of several hundred files into a custom patch
(reliably): the operation runs on a worker behind a waiting status,
whose spinner enqueues a content-only render on every tick, and over the
long operation these outrun the UI loop and overflow the buffer.
- Editing the config in an editor that suspends lazygit: the editor
subprocess runs on the UI thread, so the loop drains nothing for the
whole editing session, and the full refresh fired on resume fans out
across every scope at once — a burst of updates that overflows before
the just-resumed loop catches up.
- Any time the UI thread blocks for a long time, the periodic refreshes
keep enqueuing and eventually overflow.
The 256-slot buffer was chosen deliberately, with the panic as a "should
never happen" guard, to preserve two properties: FIFO ordering of
same-goroutine Update calls (an earlier goroutine-per-Update design
reordered them), and no self-deadlock (a blocking send from the UI
thread would block against the loop that drains it). But a fixed channel
can only offer those by crashing on overflow.
Replace it with an unbounded, order-preserving queue: a mutex-guarded
slice plus a buffered(1) doorbell channel that wakes the main loop's
select. Enqueuing appends and rings the doorbell; the loop drains the
slice to empty on each wake. This keeps FIFO order and never blocks the
caller, so there is no self-deadlock and no overflow to panic on — under
a stall the queue just grows and then drains.
Fixes#5772.
Now that the queue is unbounded, its depth is a useful signal for
understanding how the event loop behaves under load — and we expect it
to look very different across builds (e.g. master, which carries the
bounce-state-updates-to-ui-thread work, versus the v0.63.0 release this
fix ships in). Track the deepest the queue has ever been and log an Info
line whenever that record is broken, so the numbers show up in the log
for later reasoning. The mark is session-wide and doesn't reset when the
queue drains.
gocui has no logger of its own, so it exposes the new depth through a
handler (matching the existing SetFocusHandler / SetOpenHyperlinkFunc
pattern) that the gui registers to log via its own logger.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Update and friends enqueued onto a fixed 256-slot channel with a
non-blocking send that panicked when the channel was full. That guard
was firing in real use:
- Toggling a directory of several hundred files into a custom patch
(reliably): the operation runs on a worker behind a waiting status,
whose spinner enqueues a content-only render on every tick, and over
the long operation these outrun the UI loop and overflow the buffer.
- Editing the config in an editor that suspends lazygit: the editor
subprocess runs on the UI thread, so the loop drains nothing for the
whole editing session, and the full refresh fired on resume fans out
across every scope at once — a burst of updates that overflows before
the just-resumed loop catches up.
- Any time the UI thread blocks for a long time, the periodic refreshes
keep enqueuing and eventually overflow.
The 256-slot buffer was chosen deliberately, with the panic as a
"should never happen" guard, to preserve two properties: FIFO ordering
of same-goroutine Update calls (an earlier goroutine-per-Update design
reordered them), and no self-deadlock (a blocking send from the UI
thread would block against the loop that drains it). But a fixed
channel can only offer those by crashing on overflow.
Replace it with an unbounded, order-preserving queue: a mutex-guarded
slice plus a buffered(1) doorbell channel that wakes the main loop's
select. Enqueuing appends and rings the doorbell; the loop drains the
slice to empty on each wake. This keeps FIFO order and never blocks the
caller, so there is no self-deadlock and no overflow to panic on — under
a stall the queue just grows and then drains.
This also removes an inconsistency: updateContentOnly did a plain
blocking send while update panicked, so the two paths disagreed on what
happened when the queue was full. Both now share the same enqueue.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
In v0.63.0 we made a change to no longer use `GIT_OPTIONAL_LOCKS=0` on
git commands that are part of a "foreground" refresh, meaning the
refresh after a lazygit command or the focus-in refresh. We do this on
purpose to keep git's mod date cache from becoming stale, which could
make lazygit become slower over time. However, this caused a problem for
users who work very fast: staging a file and then immediately pressing
shift-A to amend while the staging's refresh is still running would show
the dreaded index.lock error.
We already had a retry-on-index-lock-error mechanism in place, but it
wasn't used for commands like amend or commit; fix this so that the
retry loop works for these too, and also make the retry window a little
longer, and fix a problem where it wouldn't work in linked worktrees or
submodules.
Closes#5778.
The retry budget was five fixed 50ms waits (250ms total). A foreground
`git status` refresh can hold index.lock for longer than that on a large
repo, so the retries could be exhausted before the lock clears. Wait 20ms
before the first retry and double each time, giving seven attempts over a
bit more than a second — enough to outlast a slow refresh while keeping
the common case (a lock that clears almost immediately) fast. The initial
delay is now a runner field so tests can zero it out instead of sleeping.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The retry check matched the literal ".git/index.lock", which only ever
appears for the main worktree. A linked worktree's lock is at
.git/worktrees/<name>/index.lock and a submodule's is under its own git
dir, so contention there was never retried. Match the bare "index.lock"
fragment instead, which covers all of them.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Have isRetryableError also inspect the returned error, not just the
captured output. Streamed commands (amend, commit, and other operations
run through the gpg helper) don't capture output, so their index.lock
failures were slipping past the retry loop and surfacing to the user as
a hard "Git command failed". Now they retry like every other command.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The gpg helper runs commands like amend with StreamOutput, so their
output isn't captured and a failed run returns an empty output string;
the index.lock message is carried by the error instead. isRetryableError
only inspects the output, so the retry loop never fires for these
commands. In practice this means a `shift-A` amend issued while a
foreground `git status` refresh briefly holds index.lock fails outright
instead of retrying.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
RunWithOutput and RunWithOutputs each carried their own near-identical
copy of the index.lock retry loop. Extract the loop into a single
retryOnLockError helper so the retry policy lives in one place, ahead of
changing that policy. Behavior is unchanged; the added tests characterize
it (success and non-lock errors run once, a lock error in the output is
retried).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
startBackgroundFetch assigned the field from its own goroutine, and
only after the initial fetch had completed, while the UI thread reads
it in triggerImmediateFetch on every repo switch, with no
synchronization.
Create the channel in startBackgroundRoutines instead, which runs on
the UI thread before the fetch goroutine is spawned; everything the UI
thread does afterwards is ordered after the write, so the read is
race-free without any locking. To make this possible, goEvery now
takes the retrigger channel as a parameter instead of creating and
returning it; callers that have no use for a retrigger channel pass
nil, and a nil channel in a select is simply never ready.
As a side effect, a repo switch that happens before the fetch loop has
started (during the intro popup or the initial fetch) now latches a
trigger and causes an immediate fetch once the loop is running, where
previously it was silently dropped.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Switching repos triggers an immediate background fetch by sending on
the goEvery retrigger channel. The send was blocking, but the goEvery
loop only receives between callbacks: while a fetch is in flight, it
waits for that fetch to finish before returning to its select. So a
repo switch that landed while a fetch was in flight would stall the UI
thread for the remainder of the fetch.
Worse, since worker refreshes capture state on the UI thread with a
blocking OnUIThreadAndWaitBackground call, the in-flight fetch's
post-fetch refresh can itself be waiting for the UI thread, turning
that stall into a deadlock cycle:
UI thread: switchTo -> triggerImmediateFetch, blocking send
goEvery loop: waiting for the in-flight fetch to finish
fetch worker: PostFetchRefresh -> RefreshFromWorker, waiting for
the UI thread
Make the send non-blocking, and give the channel a buffer of one so
that a trigger arriving while a fetch is in flight is latched rather
than dropped; that fetch is fetching the previous repo, so we still
need another one after it. The goEvery loop picks the trigger up as
soon as it returns to its select, and concurrent triggers coalesce.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The model<->view index conversions were derived from arrays that only
renderLines populated. That made them depend on the list having been
rendered (so a conversion before the first render ignored the non-model
items), and it made them go stale whenever the model changed after a
render: converting an index then returned a wrong result, and once the
model had grown past the last rendered length the conversion indexed a
too-short array and panicked (seen in cherry_pick under -race).
The conversion is a pure function of the current list length and the
current non-model items, and needs none of the rendered display strings.
Compute it directly and drop the cached arrays, so the result is always
consistent with the current model and no longer depends on rendering.
The model<->view index conversions were derived from arrays that only
renderLines populated. That made them depend on the list having been
rendered (so a conversion before the first render ignored the non-model
items), and it made them go stale whenever the model changed after a
render: converting an index then returned a wrong result, and once the
model had grown past the last rendered length the conversion indexed a
too-short array and panicked (seen in cherry_pick under -race).
The conversion is a pure function of the current list length and the
current non-model items, and needs none of the rendered display strings.
Compute it directly and drop the cached arrays, so the result is always
consistent with the current model and no longer depends on rendering.
searchModelCommits converts every commit's index, and building the
non-model items can be O(len) mid-rebase, so it would now be quadratic;
snapshot the non-model items once via modelToViewIndexConverter instead
of rebuilding them per index.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
ModelIndexToViewIndex and ViewIndexToModelIndex read conversion arrays
that only renderLines populates. So converting an index before the list
has been rendered ignores the non-model items (e.g. section headers) and
returns a wrong result; the same staleness makes a conversion after the
model has grown index a too-short array and panic (seen in cherry_pick
under -race).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Close read and called stopCurrentTask with no lock, while NewTask's
goroutine assigns it (and constructs the sync.Once it closes over) under
waitingMutex. On shutdown Close runs while a render task spawned by the
last layout is still starting, so the two raced on the field and the
once (three DATA RACE blocks under -race, e.g. cherry_pick).
Read stopCurrentTask once under waitingMutex and call the captured value
instead of re-reading the field, which establishes the happens-before
the once needs. This can't deadlock: no task holds waitingMutex across a
blocking UI-thread hop, so Close can always take it, and a task wedged in
such a hop is still bounded by the existing 3s timeout.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Some tests assert that a specific commit subject does or doesn't occur
in the main view; interactive_rebase/outside_rebase_range_select.go is
an example for this, it asserts `t.Views().Main().Content(
DoesNotContain("commit 06"))`. The problem with this kind of assertion
and our test commit naming scheme is that the diff view begins with a
"commit <hash>" line, and when that hash happens to start with "06" the
assertion matched it and failed spuriously. This was usually masked by
our MaxAttempts=2 that we currently use for integration tests (it's
quite unlikely that the commit gets a hash beginning with "06" twice in
a row). However, we want to get to a state where we can set MaxAttempts
to 1, so make this more robust by changing our naming scheme.
Some tests assert that a specific commit subject does or doesn't occur
in the main view; interactive_rebase/outside_rebase_range_select.go is
an example for this, it asserts `t.Views().Main().Content(
DoesNotContain("commit 06"))`. The problem with this kind of assertion
and our test commit naming scheme is that the diff view begins with a
"commit <hash>" line, and when that hash happens to start with "06" the
assertion matched it and failed spuriously. This was usually masked by
our MaxAttempts=2 that we currently use for integration tests (it's
quite unlikely that the commit gets a hash beginning with "06" twice in
a row). However, we want to get to a state where we can set MaxAttempts
to 1, so make this more robust by changing our naming scheme.
refreshViewLinesIfNeeded re-wrapped every line of the buffer whenever
the view was tainted. That's cheap for short content, but scrolling a
long diff calls it constantly: adjustDownwardScrollAmount queries
ViewLinesHeight on every scroll event, and each newly-read line taints
the view, so every notch re-wrapped the entire buffer. Wrapping measures
each cell's width (uniseg) and allocates per line, so once you'd scrolled
far enough down the diff, scrolling turned sluggish - the cost grew with
how much had been read. (A CPU profile of scrolling deep in a long diff
put 77% of the time in lineWrap, reached almost entirely via
ViewLinesHeight rather than draw.)
Cache each line's wrapped result on the lineType, keyed by the width it
was wrapped at, and only re-wrap lines that have actually changed since
the last refresh. A firstDirtyLine index, updated in the same three
places that set `tainted` (write, clearViewLines' callers, SetHighlight),
marks the lowest line that might have changed; lines below it with a
matching cached width reuse their cached wrapping. The cache lives on the
line, so it's freed with the line when the view's content is replaced
(e.g. selecting a different commit) - it doesn't accumulate across a
session.
The wrapping cost per scroll now scales with the number of lines just
read, not with the total size of the buffer, so scrolling stays smooth
no matter how far down you are.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Reading more lines into a lazy-loaded view (e.g. a diff being scrolled)
never changes the window layout, and after the first screenful it
doesn't even change the visible content - the new lines land below the
viewport, so the only thing that changes on screen is the scrollbar
thumb. Yet each read triggered a full render: a layout pass plus a
redraw of every view. On a slow terminal that full-screen repaint on
every read is a big part of why scrolling through a not-yet-fully-read
diff stutters.
Route the task's refresh through a content-only render instead. It
skips the layout pass and only redraws the views whose content changed,
leaving tcell's cell-level dirty tracking to emit just the cells that
actually differ (in the steady state, the scrollbar column).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When scrolling a lazy-loaded view (a diff in the main view, the command
log, etc.), we top up the view's line buffer by reading more lines from
the still-running task. This was driven by asking the task to read a
fixed number of *additional* lines on every scroll event, which had two
problems:
- It was decoupled from the scroll position. Scrolling down, back up,
and down again re-read lines that had already been read, so the buffer
crept towards the end of the input regardless of where the user
actually scrolled.
- A single wheel notch only bought a single notch worth of runway, so
fast scrolling constantly outran the reader and had to wait for the
next read (and re-render) on every notch.
Make ReadLines take an absolute target total instead of a delta: the
task tracks how many lines it has read and only reads the shortfall, so
requests are idempotent. Callers now ask to fill the viewport at the
current scroll position plus a few screenfuls of read-ahead, which gives
scrolling enough runway to stay smooth.
The four call sites all wanted the same "fill this view" computation, so
consolidate them into a single ReadLinesToFillView helper.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
LogAction and LogCommand are called from git worker goroutines (every
command a worker runs logs itself, and controllers log an action before
kicking off their worker), where they set the Extras view's Autoscroll
flag and append to GuiLog while the UI thread reads both when it lays
out and draws the view. Bounce the writes onto the UI thread instead.
This doesn't fix any user-visible issue that I know of; labelling it as
"maintenance" rather than "bug" for that reason. It is one of many steps
that gets us closer to running our test suite with `-race`.
LogAction and LogCommand are called from git worker goroutines (every
command a worker runs logs itself, and controllers log an action before
kicking off their worker), where they set the Extras view's Autoscroll
flag and append to GuiLog while the UI thread reads both when it lays out
and draws the view. Bounce the writes onto the UI thread instead.
Use the background variant so the bounce doesn't count towards lazygit
being busy: writing the command log is incidental display work, and a
foreground task would let an in-flight log write refuse a concurrent repo
switch (the same reason view-buffer renders and toasts are backgrounded).
Ordering between successive log calls is preserved by the bounce FIFO.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
GetStatusString and HasStatus read the statuses slice without holding
the mutex that addStatus and removeStatus take when they mutate it. The
readers run on the spinner-render worker (which polls GetStatusString
every frame) while removeStatus fires from the waiting-status and
toast-expiry goroutines, so the unguarded reads race the concurrent
writes. Take the mutex in the readers too.
This doesn't fix any user-visible issue that I know of; labelling it as
"maintenance" rather than "bug" for that reason. It is one of many steps
that gets us closer to running our test suite with `-race`.
GetStatusString and HasStatus read the statuses slice without holding
the mutex that addStatus and removeStatus take when they mutate it. The
readers run on the spinner-render worker (which polls GetStatusString
every frame) while removeStatus fires from the waiting-status and
toast-expiry goroutines, so the unguarded reads race the concurrent
writes. Take the mutex in the readers too.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Refresh workers do their git work on background goroutines and then
mutate the model (`Model().Commits`, `.Branches`, …) and re-render views
directly from those goroutines, racing the UI thread's own cursor and
render code. This has been a long-standing source of flaky integration
tests, and it's what prevents us from running the e2e suite under the
race detector.
This PR removes that class of races by updating refresh state only on
the UI thread, and drops the mutexes that were standing in for that
discipline. It's an internal concurrency change with no intended
difference in normal use (the one small user-facing addition is noted at
the end).
- Each refresh scope does its git work on a worker, then enqueues its
model write onto the UI thread ("bouncing") through a single primitive,
so all model mutations are serialized on the one UI goroutine alongside
the cursor/render code they used to race.
- That primitive is generation-guarded: if you switch repos while a
refresh is in flight, the queued write is dropped instead of being
applied to the new repo.
- The inputs a refresh worker reads (model fields, selection, modes) are
now captured on the UI thread up front, so the worker computes from an
immutable snapshot. Worker-issued refreshes use a dedicated entry point,
and a debug-only assertion checks that the entry point matches the
calling goroutine.
- A few flags written from workers are made atomic rather than bounced.
- All six refresh mutexes are removed as redundant; the branches mutex
is replaced by a small branch-load sequence guard so the recency-sorted
result still wins at startup.
- Repo switching now runs on the UI thread rather than a worker,
removing a race on the shared gui state.
This is one step toward being able to run the test suite under `-race`
in CI — the remaining view-buffer rendering races are left for a
follow-up.
The one user-facing addition: switching repositories while a foreground
git operation is still running is now refused with a toast, instead of
running the operation's remaining commands against the newly-switched
repo.
The model-update bounces already drop themselves when the repo is
switched mid-refresh (onUIThreadUnlessRepoChanged), but three bounces
that touch the UI without writing the model did not: refreshView's
render, the staging-panel refresh, and the stale continue-rebase prompt
dismissal. All three ran unconditionally on the UI thread, so a
background refresh in flight across a repo switch could render the old
repo's data (through a context object belonging to the now-replaced
context tree), or pop the new repo's popup based on the old repo's
prompt state.
Route them through onUIThreadUnlessRepoChanged too, so they're dropped
alongside the model writes they accompany. This also fixes the dismiss
bounce using the raw foreground OnUIThread, which ignored the background
flag every other bounce in a background refresh respects.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Every refresh scope needs two ambient values to bounce its model and
view updates back to the UI thread safely: the background flag (which
picks the dispatch variant that doesn't count towards lazygit being
busy) and the repo generation that guards the bounce against a repo
switch. These were threaded separately — background as a parameter on
every refreshXxx function, generation re-read from the model inside each
one. Bundle them into a single refreshEnv passed through instead, so the
guard has a home to grow into (the next commit needs the generation in
refreshView, which currently has no access to it).
Capturing the generation once, at the start of the refresh, is also more
correct than the previous per-function re-read. The baseline should
reflect the repo whose inputs the refresh snapshotted (all captured up
front on the UI thread), not whenever each scope's worker happens to
wake. With the per-function read, a background refresh whose worker woke
after a repo switch would read the new generation and let its bounce
through, writing data computed from the old repo's inputs into the new
repo; capturing up front makes that bounce drop instead.
No behavior change for foreground refreshes, where the UI thread is held
for the whole refresh and the generation can't move under it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The commit's gpg onSuccess runs on a worker when the command output is
streamed, so its ClearPreservedCommitMessage wrote commit-message
context state off the UI thread. Bounce that write through OnUIThread.
GetFilePathSuggestionsFunc builds the trie on a worker (the slow
AllRepoFiles walk) and then assigned Model().FilesTrie and refreshed the
suggestions panel from there, racing the UI thread that reads the trie.
Keep the build on the worker but bounce just the model assignment and
the refresh through OnUIThread.
The discard handler cancelled the commit-files range selection from its
WithWaitingStatus worker. Bounce it through OnUIThread, keeping it after
the successful CheckMergeOrRebase as before.
The three branch-delete handlers and the two worktree-removal
continuations collapsed the Branches/RemoteBranches range selection from
their worker goroutine, racing the UI thread. Wrap each collapse in
OnUIThread, keeping it in the same spot relative to the refresh (FIFO
preserves the collapse-then-refresh order the name-restore depends on).
The pull-patch-into-new-commit handlers closed the commit-message panel
and, on success, pushed the local-commits context from inside the
WithWaitingStatus worker. Close the panel in OnConfirm before
dispatching (UI thread), and bounce the post-rebase context push through
OnUIThread, keeping it on the success path.
The three rebase-onto menu items read Modes().MarkedBaseCommit.GetHash()
(a bare string field) and, on success, cleared it via
ResetMarkedBaseCommit and pushed the commits context — all from the
WithWaitingStatus worker, racing the UI thread. Read the marked base
hash before dispatching, and bounce the post-rebase reset and context
push through OnUIThread, still guarded by the success check so they
don't run on the conflict path.
interactiveRebaseWithFlag and dropMergeCommit ran inside the
WithWaitingStatus worker but read Model().Commits and wrote the
selection (SetSelection(startIdx)) there, racing the UI thread. Thread
the commits slice in from each caller, and hoist the pre-rebase
selection into a UI-thread helper (selectRebaseResultCommit) called
before dispatching — squash/fixup unconditionally, drop only on the
non-merge path, matching the previous action guard.
ResetToRef ran on a worker and wrote the local-commits and reflog
selection directly (SetSelection(0) on both) before its refresh, racing
the UI thread. Fold those into the refresh's selection intents:
SelectHeadCommit for the commits (after a reset HEAD is the top commit,
and mid-interactive-rebase it correctly picks the real head over the
first todo entry) and SelectTopReflogCommit for the reflog. The
now-atomic SetLimitCommits stays where it is.
CheckoutRef and ResetToRef set this flag from their worker goroutine
(to load fewer commits for speed) while the commits refresh reads it on
the UI thread in captureCommitsState to decide how many to load — a data
race. Make it an atomic.Bool so those writes are safe where they are,
rather than routing the flag through a refresh intent. Precedent:
Branch.BehindBaseBranch.
discard reads Model().Commits and the selected commit index from its
WithWaitingStatus worker; read them in HandleConfirm instead.
toggleForPatch reads the commit-files ref name from the worker, and its
startPatchBuilder call reads the context's canRebase and diff range from
there too. Capture the ref name and run startPatchBuilder in
HandleConfirm before dispatching; PatchBuilder.Start only assigns
fields, so moving it off the worker changes no timing.
discard still collapses the range selection from the worker; that write
is a separate concern, left for a follow-up.
ResetSubmodule and fastForward each call a helper that reads the model
from inside their worker: FileForSubmodule reads Model().Files and
worktreeForBranch reads Model().Worktrees, racing the UI thread's model
writes. Hoist both lookups above the worker dispatch.
The two move helpers run inside the WithWaitingStatus worker that
withNewBranchNamePrompt dispatches to, but read Model().Files/Submodules
(to decide whether to auto-stash) and Model().Commits (the unpushed
commits to cherry-pick off the base branch) from there, racing the UI
thread's model writes. Compute mustStash — needed by both paths — at the
top, and the unpushed commits in the off-of-main menu item, on the UI
thread, and pass them into the helpers.
handleReword, amendTo, and the reset/set/add-co-author handlers pass
Model().Commits (and the selected line index) to a git rebase from
inside the WithWaitingStatus worker, racing the UI thread's model
writes. Read them on the UI thread before dispatching.
The author handlers index the full commit list by absolute start/end, so
the range sub-slice withItemsRange hands amendAttribute is not what they
need; capture the full Model().Commits there and thread it through.
These handlers dispatch their rebase to a worker via WithWaitingStatus
but read Model().Commits (and, for move-to-selected-commit, the selected
line index) from inside that worker, racing the UI thread's model
writes. Read them on the UI thread before dispatching and close over the
results.
getPatchCommitIndex stays as-is: moving its call out of the worker makes
its own Model().Commits read UI-thread-bound too, so the identical copy
in patch_building_controller.go needs no matching signature change.
The two pull-patch-into-new-commit handlers still push a context and
close the commit-message panel from the worker; those writes are a
separate concern, left for a follow-up.
With every scope's worker reads now captured on the UI thread and every
worker caller on RefreshFromWorker, the debug entry-point assertion no longer
needs to be scoped to the commits refresh. Move it to the top of
performRefresh so it guards every refresh regardless of which scopes it
touches, and drop the per-scope gate.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The remaining refresh scopes each still read model, context, and mode state
directly on their worker, racing the UI thread — the same class of race the
commits refresh had:
- files reads Model.Files (to detect resolved conflicts and drive the
auto-stage) and the Files context's ForceShowUntracked;
- reflog reads the existing reflog slices (for the incremental fetch),
Model.HashPool and the filtering path/author;
- branches reads Model.MainBranches and the previous branches (for the
BehindBaseBranch carry-over);
- stash reads the filtering path.
Gather each scope's inputs into an immutable snapshot on the UI thread (via
captureOnUIThread) before dispatching the git work, and have the refresh
compute from the snapshot — for branches, threaded through both the immediate
and the recency-sorted startup loads, which share one snapshot (the
BehindBaseBranch carry-over is identical either way). Status, tags and
worktrees read nothing UI-owned, so they're left alone.
For the snapshots to actually run on the UI thread, the worker callers that
reach these scopes must announce themselves: convert the submodule
operations, the submodule stash-and-reset, and the background files poller
to RefreshFromWorker.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
GuiRepoState.mergeOrRebaseStartedInLazygit and StartupStage are plain
fields, but they're written and read from worker goroutines: the former
from both the files refresh and the merge/rebase result path (which runs on
a worker for the async callers), the latter from the reflog/branches load as
it transitions the startup stage. Those are data races.
Make both atomic, like Branch.BehindBaseBranch. They're leaf flags, not
mutexes guarding model or view state, so an atomic is the natural fit and
keeps the merge/rebase result path out of this change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
These four refreshes each read model, context, and mode state directly on
their worker — the same class of race the commits refresh had:
- remotes reads the selected remote (Contexts().Remotes.GetSelected), needed
to keep the remote-branches selection valid;
- sub-commits reads the SubCommits ref/limit/divergence, the filtering
path/author, and Model.MainBranches/HashPool;
- commit-files reads the diff endpoints (CommitFiles from/to and the diffing
args);
- rebase-commits reads Model.HashPool/Commits.
Give each the same treatment as commits: gather its inputs into an
immutable snapshot on the UI thread (via captureOnUIThread, inline for a
UI-thread refresh, hopped for a worker one) before dispatching the git work,
and have the refresh compute from the snapshot. The commit-files re-init
inside the commits refresh captures its endpoints in the bounce, right after
ReInit sets them, before dispatching to the worker.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Now that every commits-reaching refresh issued from a worker goes through
RefreshFromWorker, guard the choice: in debug builds, panic if a refresh was
issued from the UI thread as RefreshFromWorker or from a worker as Refresh.
The caller's own goroutine is recorded at the top of performRefresh, before
a BLOCK_UI refresh dispatches onto the UI thread, so the check holds for
every mode rather than being fooled by BLOCK_UI. It's scoped to the commits
refresh for now, the only converted scope; once the rest are converted the
guard can move up to cover every refresh unconditionally.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
CheckMergeOrRebaseWithRefreshOptions refreshes after a merge/rebase step,
and until now always via the UI-thread Refresh. Most of its callers are on a
worker (the WithWaitingStatus/WithInlineStatus merge, squash-merge, rebase,
pull, amend, drop, and patch-move handlers), so that refresh reads the
commits scope off the UI thread — the race the previous commit addresses for
everything else.
Split it: the default is for worker callers and refreshes via
RefreshFromWorker; a new CheckMergeOrRebaseWithRefreshOptionsFromUIThread is
for the handlers that run the step synchronously on the UI thread
(WithWaitingStatusSync, kept sync so rapid key presses batch): move up/down,
revert, squash-fixups, cherry-pick paste, and patch-discard.
The two share a private impl carrying which thread the caller is on, and the
auto-skip recursion (genericMergeCommandImpl for an empty commit) threads it
through so the follow-up step refreshes on the same thread. The
merge-and-commit refresh in SquashMergeCommitted, also on a worker, moves to
RefreshFromWorker to match.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A commits refresh does its git work on a worker and then reads the model,
the contexts, and the modes for that work directly from there:
LocalCommits.GetSelectionRangeAndMode/GetLimitCommits/GetShowWholeGitGraph,
Model.Commits/MainBranches/HashPool, the filtering path/author. Those are
owned by the UI thread, which is concurrently running the cursor and render
code, so the reads race it — the dominant, confirmed source of the
commits-scope flakes (the startup ClampSelection vs GetSelectionRangeAndMode
race, for one).
Gather them into an immutable capturedCommitState on the UI thread, before
the git work is dispatched, and have refreshCommitsWithLimit compute from
that snapshot. UI-thread callers capture inline; worker callers can't (a
SYNC/BLOCK_UI refresh parks the UI thread at wg.Wait, so hopping from a
scope sub-worker would deadlock), so the capture is lifted out of the scope
worker into the refresh orchestration, and worker callers announce
themselves with a new RefreshFromWorker entry point that hops the capture to
the UI thread and blocks for it (OnUIThreadAndWait). BLOCK_UI runs the whole
refresh on the UI thread regardless of the caller, so it captures inline
too.
Every refresh issued from a worker that reaches the commits (or branches,
which pulls in commits) scope is converted: the fast-forward, branch/tag
delete, worktree remove/detach, push, reword-via-rebase, author edits,
custom-command, hard-reset-with-autostash, reset-to-ref, fetch-and-checkout,
gpg-stream, post-fetch, and external-change-poller refreshes, plus the
branch checkout and move-commits-to-new-branch refreshes.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The next commits move refresh workers to read UI-thread-owned state (the
model, contexts, selection) on the UI thread rather than off it. Two
primitives support that:
- OnUIThreadAndWait runs a function on the main event loop and blocks the
caller until it has run, so a worker can read that state without racing.
OnUIThreadAndWaitBackground is the same for background routines, whose
work must not count towards the program being busy.
- IsUIThread reports whether the caller is on the main event loop, for a
debug-only assertion that a refresh was issued from the thread it claims.
It records the main loop's goroutine id in MainLoop and compares via
goid, so it's promoted from an indirect to a direct dependency.
goid is used only by that debug assertion, never to drive production
control flow.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The PR fetch needs the current branches (for their upstreams) and
remotes to know what to query. It read them from Model().Branches /
Model().Remotes on its own worker, after waiting on branchesAndRemotesWg
for the branches and remotes refreshes to finish.
That wait no longer guarantees fresh data: those refreshes now write the
model in a bounce onto the UI thread, and Done() fires before the bounce
has been processed. So the fetch read the pre-refresh lists — most
visibly, checking out a branch that has a PR wouldn't show that PR until
the next refresh, because the fetch queried the old branch set.
Have refreshBranches / refreshReflogAndBranches / refreshRemotes return
what they loaded, stash it in locals in Refresh, and hand it to the
fetch. The wait on branchesAndRemotesWg orders the fetch after both
loads have stored their slices, so it fetches against exactly the
branches and remotes that were just loaded, with no model read on the
worker. The previous commit guarantees both are always in scope when
pull requests are, so no fallback is needed.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The pull-request fetch queries GitHub for the tracking branches'
upstreams against the configured remotes. It therefore depends on the
branches and remotes being up to date; a refresh that asks for pull
requests but not for those (e.g. checking out a branch) would fetch
against a stale branch/remote list — for instance missing the PR of the
branch just checked out.
Expand the scope so pull requests always co-refresh branches and
remotes. This also sets up the next commit to hand the freshly-loaded
branches and remotes straight to the fetch, instead of reading them
back from the model (which, now that those writes are bounced onto the
UI thread, would be stale on the worker).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
CommitFileTreeViewModel embedded the low-level tree's SetTree, which
rebuilds the node list without touching the cursor. So after a shrinking
rebuild (e.g. moving a patch out into the index removes a file), the
selection index could be left past the end of the tree. GetSelectedItems
then indexes out of range and returns a nil node, which segfaults callers
such as canEditFiles when the options map is rendered during layout.
Override SetTree to ClampSelection after the rebuild. Unlike
FileTreeViewModel we deliberately don't also re-find the selected node by
path: that walk lands on the containing directory when a file is removed
from a dir that then collapses, whereas keeping the clamped index lands
on the sibling file (see discard_old_file_changes).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Operations that check something out (checkout, create branch, move
commits to a new branch, fetch-and-checkout) selected the newly
checked-out branch by calling SelectFirstBranchAndFirstCommit() before
the refresh and passing KeepBranchSelectionIndex so the refresh wouldn't
override it. That set the selection directly, usually from a worker
goroutine (WithWaitingStatus/WithInlineStatus). Now that the refresh's
own selection write is bounced onto the UI thread, the two writes could
land in either order, and under load the refresh's "restore the
previously-selected branch" write would win — leaving the old branch
selected instead of the new one (flaky
move_commits_to_new_branch_from_base_branch).
Replace it with declarative selection intents applied inside the
refresh's own bounce, so the selection is set on the UI thread and
atomically with the list write (no off-thread write, and no BLOCK_UI
needed to avoid a flicker):
- BranchSelection: SelectCheckedOutBranch selects the checked-out branch
(top of the list). The default, KeepBranchSelectionByName, restores
the previously-selected branch by name as before. This replaces the
KeepBranchSelectionIndex bool.
- CommitSelection: SelectHeadCommit (already existed) for the commit.
- SelectTopReflogCommit selects the top reflog entry, since a checkout
adds a new entry there (reflog/checkout relies on this).
SelectFirstBranchAndFirstCommit is gone. The previously-selected branch
is now read at the top of the branches bounce, before the list is
overwritten, so that read moves onto the UI thread too.
fetchAndCheckout's refresh changes from ASYNC to SYNC so its
post-refresh focus switch can run in Then on the UI thread; SYNC keeps
the inline fetch spinner spinning (only BLOCK_UI would freeze it).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A toast keeps a foreground spinner task alive for its whole lifetime
(~2-4s): showing one calls renderAppStatus, whose OnWorker loop runs
until the status string clears. With the repo-switch guard in place that
made the guard's own "can't switch, operation in progress" toast keep
Busy() true, so the next escape/switch was refused until the toast
faded — you had to wait it out.
Render toasts in the background, like view-buffer content: a toast is a
transient notification, not lazygit driving an operation, so a switch
during one is fine. A real operation that shows a toast still keeps its
own foreground task busy independently.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Switching repos reassigns gui.git and the process cwd; doing it while a
foreground git operation (rebase/commit/push/…) is mid-flight would run
that operation's remaining commands against the wrong repo. The same
applies while the refresh an operation triggers is still settling: its
model writes are generation-guarded, but the client-side Then/OnUIThread
callbacks that run after it aren't, and shouldn't run against a repo that
changed underneath them.
Refuse the switch (with a toast) whenever gocui reports a busy foreground
task. DispatchSwitchTo carries the guard for the simple callers. The
callers that do work before the switch check up front instead, so a
refused switch doesn't leave that work half-done: worktree creation
checks before creating (its own waiting-status spinner would otherwise
make the query busy and refuse its own switch); submodule-enter and the
recent-repos menu check before mutating the repo-path stack (pushing /
clearing it); and escape-to-parent (SwitchToParentRepo) checks before
popping it, so a refusal doesn't consume the entry and strand the user
with nowhere to escape back to. All then call the unguarded switchTo,
which is safe because their own operation is complete by then.
The repo-switch busy query must not count view-buffer content rendering:
those tasks paint a view rather than drive a git operation, so leaving
one running across a switch is harmless (the switch's own refresh
re-renders). More importantly, they fire on nearly every focus/selection
change — including the context activation that runs right before a
menu/prompt confirmation handler (e.g. confirming worktree creation).
A synchronous busy check in such a handler would otherwise see that
render and make the very switch the handler is about to request refuse
itself.
Route ViewBufferManager's tasks through a new gocui NewBackgroundTask so
they're tracked for idle detection but excluded from the busy query. The
task "background" flag now covers two kinds of non-blocking work: the
background routines (and their refreshes) tagged earlier, and view
rendering.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
For the busy query to be usable as a repo-switch guard it has to be
false while the ongoing background routines run, or a switch would be
refused every time a background fetch or files refresh happened to be in
flight. Mark that work as background so it's excluded from the query.
The background routine dispatch in goEvery becomes OnWorkerBackground,
and the auto-fetch waiting status renders its spinner through the
background variants. Within a refresh, the background flag (which
Refresh already carries as options.Background, and which the files path
already threaded) is now threaded through every place that enqueues a
task: the async scope workers, the model-write bounces
(onUIThreadUnlessRepoChanged), refreshView, the staging bounce, the
Then dispatch, and the branch-loader's behind-count worker. Two
single-caller chains reached by a background files refresh get the flag
too: MergeConflictsHelper.EscapeMerge and BranchesHelper.
AutoForwardBranches (whose follow-up refresh must stay background when
triggered by the background fetch).
Nothing gates on the busy query yet, so this is behavior-preserving;
background tasks still count as busy for the test idle-listener, which
looks at every task regardless of the background flag.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Repo-switch safety needs to answer, synchronously on the UI thread,
"is any foreground work in flight right now?" so it can refuse a switch
that would run against a repo about to be swapped out. gocui already
tracks a task per OnWorker/Update for the test idle-listener; extend
that.
Tasks gain a background flag: background tasks (the ongoing routines
like auto-fetch, and the refreshes they trigger) don't count towards
busy, because their model writes are already guarded against a
concurrent switch by the repo generation. Add OnWorkerBackground,
UpdateBackground and UpdateContentOnlyBackground (plus the gui-layer
OnUIThreadBackground / OnUIThreadContentOnlyBackground / OnWorkerBackground
on IGuiCommon) so the few background call sites can opt in without
touching the hundreds of foreground callers.
TaskManager.hasBusyForegroundTaskExcept answers the query; Gui.Busy()
wraps it, excluding the event currently being processed (recorded as
currentTask) so a handler asking the question doesn't count itself.
Nothing gates on Busy() yet; this is the mechanism only.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
DispatchSwitchTo wrapped its whole body in WithWaitingStatus, so the
switch ran on a worker: it chdirs, reassigns gui.git, and swaps gui.State
(in resetState), all of which the UI thread also reads. The generation
guard prevents the refresh-in-flight logical corruption but not this
pointer data race on gui.State.
Run the switch synchronously on the UI thread instead. Every caller is
already a UI-thread handler except NewWorktreeCheckout, which must create
the worktree (git work) on a worker first; it now dispatches only the
switch via OnUIThread. The heavy data loading still happens
asynchronously via the refresh that onNewRepo triggers, so the
synchronous part is small (a couple of git rev-parse plus direnv).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This removes the last refresh mutex. RefreshingBranchesMutex wasn't
guarding a data race (Branch.BehindBaseBranch is atomic, and every model
write is now bounced onto the UI thread); it was serializing the two
branch loads that race at the INITIAL startup stage — an immediate one
sorted without the reflog, and an async one that loads the reflog and
sorts by recency — so that the recency-sorted write landed last and won.
That serialization was never a real guarantee, only "very likely": it
relied on the immediate load acquiring the lock before the async load,
which had to load the reflog first.
Instead, each branch load takes a monotonically increasing sequence
number, and its bounce drops the write if a later-started load has
already applied. Combined with the preceding commit (immediate load runs
before the async one is spawned), this is an actual guarantee: the
immediate non-recency load always has a lower sequence than its recency
async partner, so the highest sequence number is always held by a
recency-sorted load, and highest-wins converges on recency ordering —
even if more refreshes fire during the INITIAL window, since each
refresh's async out-sequences its own immediate.
The guard also subsumes what the mutex gave post-startup: a slow, stale
refresh's bounce can no longer clobber a newer refresh's branches.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
At the INITIAL startup stage two branch refreshes happen: an immediate
one sorted by whatever reflog we have (empty, so not by recency), and an
async one that loads the reflog first and re-sorts by recency. Until now
the async one was spawned first and the immediate one ran afterwards;
this inverts that so the immediate refresh runs before the async one is
spawned.
With RefreshingBranchesMutex still in place this is behavior-preserving
(the mutex serializes the two either way). It's a preparatory step for
replacing that mutex with a branch-load sequence guard: running the
immediate refresh first establishes a happens-before relation between
the two loads' sequence numbers, so the recency-sorted one is guaranteed
the higher sequence.
This also lets refreshReflogCommitsConsideringStartup fold into
refreshReflogAndBranches, whose two-phase logic is now all in one place.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Now that every refresh scope writes its model updates on the UI thread
via onUIThreadUnlessRepoChanged, the per-scope mutexes that used to
serialize concurrent worker-goroutine access are redundant:
Model().Commits, .SubCommits, .Authors, the status view content, and
.PullRequests/.PullRequestsMap are all now written only on the UI
thread, and their readers already ran there. setSubCommits only existed
to take the lock, so it's inlined to match refreshSubCommitsWithLimit,
which writes Model().SubCommits directly.
The worker phases still *read* some of these fields (the commit
selection range, MergeRebasingCommits), but those reads race a
concurrent refresh's bounced write regardless of the mutex — the write
happens in the bounce, outside the locked region — so the mutex never
protected them. That residual read race belongs to the broader -race
effort, not to these locks.
RefreshingBranchesMutex is deliberately kept. It is load-bearing for a
reason unrelated to data races: at the INITIAL startup stage two
refreshBranches run concurrently — an immediate one with an empty
reflog (non-recency order) and an async one with the freshly-loaded
reflog (recency order). The mutex serializes them so the recency write's
bounce is enqueued last and wins. Without it the stale non-recency write
can land last, reordering the branches list (caught by the recency-sort
e2e tests: cherry_pick/*, branch/rebase_*).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
refreshBranches now loads the branches (and worktrees) on the worker and
writes Model.Branches, the pull-requests map, Model.Worktrees, and the
restored branch selection in an onUIThreadUnlessRepoChanged bounce. The
selection restore and rebuildPullRequestsMap run in the bounce so they
see the branches we just wrote; the LocalCommits re-render (for branch
head visualization) moves into the same bounce.
refreshStatus is adjusted to read the checked-out branch and the linked
worktree name inside its bounce rather than on the worker: both derive
from models (Branches, Worktrees) that are now written via bounces, so
reading them on the worker would format the status from stale values —
which showed up as the status line dropping the "(worktree)" suffix right
after entering a submodule or switching worktrees. The git work
(WorkingTreeState) stays on the worker.
Two callers that read the branches model right after a SYNC branches
refresh move their reads into Then:
- BranchesHelper.PostFetchRefresh: AutoForwardBranches reads Model.Branches,
so it runs in Then (preserving that a fetch error is still returned to
the caller and that background auto-forward errors aren't surfaced as a
popup).
- BranchesController rename: the re-select-by-name loop runs in Then.
RefreshingBranchesMutex is left in place for the mutex cleanup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshCommitsWithLimit now loads the commits, working-tree state and
bisect info on the worker and writes them all — Model.Commits,
Model.BisectInfo, Model.WorkingTreeStateAtLastCommitRefresh,
Model.CheckedOutBranch, the authors, and the restored commit selection —
in a single onUIThreadUnlessRepoChanged bounce. The selection restore
(SelectHeadCommit / KeepCommitSelectionByHash) has to run in the bounce
because it reads the freshly-loaded commits; the FocusLine scroll is
enqueued from within the bounce so it still runs after refreshView's
re-render, as before.
refForLog no longer writes Model.BisectInfo as a side effect; it returns
the bisect info it read, and the bounce writes it, keeping that model
write on the UI thread. No caller reads Model.BisectInfo synchronously
after a refresh (the bisect controller reads Git().Bisect.GetInfo()
directly), so this is safe.
refreshCommitsAndCommitFiles's post-refresh re-init of the commit files
context depends on that restored selection, so it reads the selection in
a bounce and dispatches the commit-files git work back to a worker.
LocalCommitsMutex / AuthorsMutex are left in place for the mutex cleanup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshGithubPullRequests and setGithubPullRequests now do their network
work on the worker and write Model.PullRequests / PullRequestsMap in an
onUIThreadUnlessRepoChanged bounce (the "no github remotes" and "no base
remote" early-returns clear them the same way). rebuildPullRequestsMap
moves into the bounce so the map is built from Model.Branches and
Model.Remotes as they stand on the UI thread — after those scopes'
refreshes have applied their own bounces — rather than from whatever the
worker happened to see.
The remaining worker-side reads of Model.Branches (to pick which upstream
branches to query) are the same not-yet-addressed worker-read race that
applies to the other bounced scopes.
RefreshingPullRequestsMutex is left in place for the mutex cleanup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshStatus computes the status line on the calling goroutine (as
before) but now writes it to the status view in an
onUIThreadUnlessRepoChanged bounce rather than calling SetViewContent
directly from the worker. RefreshingStatusMutex is left in place for now;
it only guards the compute phase between concurrent callers and comes out
in the mutex cleanup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshReflogCommits now does the git fetch on the worker and computes
the new ReflogCommits / FilteredReflogCommits values (still reading the
existing slices for the incremental prepend), then writes them in an
onUIThreadUnlessRepoChanged bounce. The freshly-computed reflog is still
returned for the branches load, so recency sorting is unaffected by the
write now landing on the UI thread (see the previous commit).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
BranchLoader.Load reads the reflog commits to sort branches by recency.
Today it reads them straight from Model.ReflogCommits, which works
because in the recency path the reflog refresh writes that field
synchronously just before the branches refresh reads it (same goroutine,
sequential).
An upcoming commit bounces the reflog model write onto the UI thread, at
which point Model.ReflogCommits wouldn't be updated yet when branches
runs — branches would sort by the previous refresh's reflog. To decouple
the branches load from *when* that write lands, pass the reflog commits
to refreshBranches explicitly: refreshReflogCommits now returns the
commits it loaded, and the recency path hands them straight to
refreshBranches. The non-recency path (branches and reflog run
concurrently, as before) keeps passing Model.ReflogCommits.
Pure refactor: behavior is identical, since the value passed is exactly
what Load read from the model before.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshRemotes now loads the remotes on the worker and writes
Model.Remotes, rebuilds the pull-requests map, and updates the selected
remote's RemoteBranches inside an onUIThreadUnlessRepoChanged bounce.
RemotesController.addAndCheckoutRemote read Model.Remotes right after its
SYNC REMOTES refresh to select the newly-added remote; since that write
now bounces, the selection (and the follow-up fetch) move into Then so
they run against the post-refresh model rather than the stale one.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshSubCommitsWithLimit now loads the sub-commits on the worker and
writes Model.SubCommits (and folds their authors into Model.Authors via
RefreshAuthors) inside an onUIThreadUnlessRepoChanged bounce.
SubCommitsMutex and AuthorsMutex are left in place: the former is shared
with setSubCommits, the latter with the commits refresh's RefreshAuthors
call, so both come out only once those other writers are on the UI thread
too.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshRebaseCommits now computes the merged rebasing commits and working
tree state on the worker and writes Model.Commits /
WorkingTreeStateAtLastCommitRefresh in an onUIThreadUnlessRepoChanged
bounce. LocalCommitsMutex is left in place for now; it's shared with the
commits and branches refreshes and comes out once they're all bounced.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshWorktrees now writes Model.Worktrees in an
onUIThreadUnlessRepoChanged bounce. loadWorktrees becomes a pure loader
that returns the worktrees instead of writing them, since it's shared
with refreshBranches; refreshWorktrees bounces the result, and the
branches call site writes it directly for now (that write moves into
refreshBranches's own bounce when that scope is migrated).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshStashEntries now loads the stash entries on the worker and writes
Model.StashEntries in an onUIThreadUnlessRepoChanged bounce.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshTags now captures the repo generation, loads the tags on the
worker, and writes Model.Tags in an onUIThreadUnlessRepoChanged bounce
rather than directly from the worker goroutine.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshCommitFilesContext now enqueues the Model.CommitFiles write and
CommitFileTreeViewModel.SetTree() call via OnUIThread, instead of running
them directly on the worker goroutine that drives async refreshes. This is
what makes moving SwitchToDiffFilesController's post-refresh work into Then
(previous commit) actually necessary, rather than just future-proofing.
Same repo-switch hazard as the FILES bounce, closed the same way: it
captures the repo generation before the git work and bounces through
onUIThreadUnlessRepoChanged, so the write is dropped if the user switched
repos while it was in flight.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
SwitchToDiffFilesController.enter calls SelectPath and Context.Push
right after a (SYNC, by default) COMMIT_FILES refresh. This works today
because the model write currently happens synchronously in the worker
before Refresh's wg.Wait() returns, but an upcoming commit will bounce
that write onto the UI thread instead, at which point wg.Wait() no
longer guarantees it's been applied, and SelectPath would operate on a
stale tree.
Move both calls into Then ahead of that change, for the same reason as
the earlier FILES-scope commit: Then is already queued via OnUIThread,
so this is behavior-preserving on its own.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
FileTreeViewModel.RWMutex is removed along with the
withFileTreeViewModelMutex wrapper in FilesController that RLocked it:
every writer (the bounce closure, previous commit) and every reader (key
handlers, disabled-reason callbacks) now runs on the UI thread, so the
mutex is redundant.
RefreshingFilesMutex is removed entirely, including its last use in
repos_helper's DispatchSwitchTo. That use predates the bounce and was
never about FilesController's optimistic-rendering concern; it serialized
a repo switch's onNewRepo() against an in-flight FILES refresh for the
repo being switched away from, so that a slow refresh from the old repo
couldn't write into the freshly-reset model for the new one. Bouncing the
write already broke that guarantee on its own terms — the mutex's critical
section never covered the bounced closure's actual execution, only the
(now-removed) code that enqueued it — so by this point it was only still
locked here without protecting anything real; the previous commit's
repo-generation guard is what now actually closes that race, making this
lock fully redundant rather than just relocated.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshStateFiles now does its git work on the worker and enqueues a
single OnUIThread closure that writes Model.Submodules, Model.Files, and
the FileTreeViewModel state together, instead of writing them directly
from the worker goroutine. refreshStateSubmoduleConfigs becomes a pure
getter (returns the configs; no model write) so the result can be
threaded into that same bounce.
The STAGING handler wraps RefreshStagingPanel in OnUIThread after
fileWg.Wait() so it sees the post-bounce file model rather than the stale
pre-refresh one — without this it would race the files bounce queued just
above it.
Bouncing the write opens a hazard the old synchronous write didn't have:
if the user switches repos while this refresh is in flight, the queued
closure would fire after resetState has replaced the model with a fresh
one for the new repo, silently overwriting it with the previous repo's
files. Guard against this with a repo generation: resetState bumps a
counter on every switch, refreshStateFiles captures it before its git
work, and onUIThreadUnlessRepoChanged drops the bounce if the generation
has moved on. This one helper is the general mechanism the remaining
scopes' bounces will use too; the same guard covers the rebase-continue
prompt, which reads Model.Files right after.
A generation counter, not a comparison of the *Model pointer: switching
away from and back to a repo reuses that repo's cached state (the same
Model pointer), which a pointer comparison would wrongly accept even
though the in-flight data is stale.
PromptToContinueRebase's Then callback (previous commit) now gets an
explanatory comment, since this is the commit that makes it necessary.
The explicit locking around these writes (RefreshingFilesMutex in
refreshFilesAndSubmodules, FileTreeViewModel.RWMutex around the write in
refreshStateFiles) is left in place for now even though it's becoming
redundant, to keep this commit focused on the bounce itself; it's removed
next.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
PromptToContinueRebase and WithEnsureCommittableFiles both read
Model.Files right after a SYNC FILES refresh. This works today because
the model write currently happens synchronously in the worker before
Refresh's wg.Wait() returns, but an upcoming commit will bounce that
write onto the UI thread instead, at which point wg.Wait() no longer
guarantees it's been applied.
Move both reads into Then ahead of that change. Then is already queued
via OnUIThread (previous commit), so this is a behavior-preserving
refactor on its own: the model is fully written by the time Then runs
either way, whether that write is still synchronous or gets bounced
later.
As part of restructuring WithEnsureCommittableFiles, prepareFilesForCommit
and syncRefresh are inlined into their single call sites.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
This is preparation for upcoming commits that will bounce refresh-scope
model updates (e.g. Model.Files) onto the UI thread by enqueuing the
write via OnUIThread instead of applying it directly on the worker
goroutine. Once that lands, a Then callback that reads the model must
run after that queued write has been processed, not synchronously at
wg.Wait() time — at that point the workers have returned, but a bounce
they queued may not have been processed yet.
Queuing Then via OnUIThread here, ahead of that change, guarantees the
right ordering once it lands: a bounce queued earlier in the same
refresh is already sitting in the channel by the time wg.Wait()
returns, so Then enqueued after it will always be processed after, and
see the post-refresh model.
The signature change to func() error lets Then propagate errors
through gocui's normal error handler (the same path key-handler errors
take).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
GetIsRefreshingFiles() is never called anywhere in the codebase, so the
flag serves no purpose. Remove it from Gui, StateAccessor, and
IStateAccessor, and drop the two SetIsRefreshingFiles calls in
refreshFilesAndSubmodules that maintained it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Operations that show an inline status next to the item they operate on
("Pushing", "Fast-forwarding", "Fetching", …) would sometimes fail to
remove this inline status when done.
Fixes#5534.
Pushing a tag triggers no refresh, so it used to redraw the tags view
by hand to remove the "Pushing" inline status. WithInlineStatus now
always re-renders after clearing the operation, so this is redundant.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Operations that show an inline status ("Pushing", "Fast-forwarding",
"Fetching", …) removed it by relying on the async refresh they trigger
to redraw the view after the item operation had been cleared. That
ordering was never guaranteed: the item operation is cleared on the
worker once the operation's function returns, while the refresh redraws
the item from the UI thread whenever its (asynchronous) git work
happens to finish. If the refresh redrew before the clear, the status
was left on screen with no later redraw to remove it, so the branch (or
tag/remote) stayed stuck showing e.g. "Pushing" indefinitely even though
the operation had completed. This is timing-dependent, which is why it
surfaced as rare, hard-to-reproduce reports and as flaky CI failures.
Fix it by re-rendering in stop() right after clearing the operation,
and by making these refreshes synchronous rather than async. Because a
synchronous refresh has already updated the model and queued its own
redraw by the time stop() runs, and UI-thread callbacks run in order,
the redraw we queue here runs last and draws the up-to-date model with
the status removed. An async refresh couldn't give that guarantee: its
model update might not have landed yet, so the redraw could briefly
flash the pre-operation status.
Pull refreshes through the shared CheckMergeOrRebaseAndSelectHeadCommit,
so that helper becomes synchronous too; its only other caller,
RegularMerge, thereby also refreshes synchronously, which is fine: a
synchronous on-worker refresh is what we want anyway.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Some operations used to freeze lazygit while they ran, with no sign that
anything was happening — the UI would just lock up until they finished.
This affected:
- Merging a branch (including squash merges)
- Rebasing a branch interactively onto another ref
- Setting a commit to "edit"
- Resetting to a commit, branch, or tag
- Continuing, skipping, or aborting a merge or rebase
Many of these were usually fast under normal conditions (e.g. a hard
reset when the head doesn't change, or a "rebase --continue" when
there's only a handful of commits left), but in some cases they could
take long (e.g. a hard reset to some distant commit where lots of files
changed). Now each of these shows a spinner while it works and keeps the
UI responsive, matching how similar operations already behave.
Resetting to a commit/branch/tag from the reset menu ran inline on the UI
thread with no spinner; a hard reset to a distant commit can take a while
and blocks the UI meanwhile. Run it on a worker with a waiting status. The
undo/redo callers of ResetToRef already wrap it this way.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Setting a single commit to "edit" ran the interactive rebase inline on the
UI thread with no spinner, while its sibling startInteractiveRebaseWithEdit
(used when editing multiple commits or quick-starting a rebase) already runs
on a worker with a waiting status. Make the direct path match.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The interactive-rebase item in the rebase-onto-ref menu ran inline on the UI
thread with no spinner, unlike its two siblings in the same menu (simple
rebase and rebase onto base branch), which already run on a worker with a
waiting status. Make it consistent.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The regular and squash merges from the merge menu ran inline on the UI
thread, freezing it with no spinner while git worked. Run them on a worker
with a waiting status, like the rebase entry points already do.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Continuing, skipping, or aborting a merge/rebase from the options menu ran
the git command inline on the UI thread, freezing the UI with no spinner
while it worked (a continue can replay many commits). Run the
non-subprocess path on a worker with a waiting status instead, matching how
the other merge/rebase entry points already behave.
The auto-skip recursion in CheckMergeOrRebaseWithRefreshOptions must not
start its own worker: it already runs on the caller's thread (the worker of
the enclosing waiting status, or the UI thread for the synchronous callers).
Route it through genericMergeCommandImpl with the waiting status suppressed
so its behavior is unchanged.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When showing the files of a commit, we used to display renamed files as
a pair of added and deleted files, rather than a single `R` entry. This
is inconvenient when just browsing the commit's files because you can't
see if the rename also has modifications; but it becomes a real problem
when trying to work with the renamed file in a custom patch if it also
had modifications; there was no way to discard them, for example.
The Files panel already shows renamed files as `R` and allows you to
stage/unstage/discard hunks in them, so there's no reason why the patch
building panel shouldn't allow the same; and this PR adds this.
To drop just the modifications of a rename, add the individual hunks to
the custom patch (the side panel shows a `◐` icon); reverting the patch
then only drops the modifications but not the rename. To also drop the
rename, add the entire `R` file to the custom patch from the side panel
(it gets a `●` icon).
When loading the files of a commit we passed --no-renames, so a rename
showed up as a separate delete and add rather than a single R entry.
That made it impossible to work with a rename that also modifies the
file: the modifications were spread across a full deletion and a full
addition instead of appearing as the handful of lines that actually
changed. The staging view already shows renames and lets you stage
their hunks, so there was no good reason for the patch builder to
differ; the flag was only there because the commit-file parser couldn't
cope with the rename record format.
Switch the commit-file loader and the per-file diff to --find-renames,
teach the parser about the rename record (a status followed by two
paths), and carry the previous path through the patch builder so the
diff for a rename is loaded with both paths, which is what makes git
emit the rename in the first place.
A whole-file selection keeps the rename in the header, so the rename
moves or is discarded together with the file's contents. A partial
selection instead strips the rename metadata and points the header at
the new path, so applying the patch only changes the contents and
leaves the rename in place; the blob index line is kept so that a 3-way
apply can still fall back to a blob merge.
Discarding a renamed file from a commit now discards both the new and
the old path, so the new file is removed and the old one is restored.
Changing the rename similarity threshold refreshes the commit files
panel too, not just the files panel, so that a rename can turn into a
delete and add or back. It is disabled while building a patch, however,
because the patch builder caches each file's diff by path and would
desync if a rename changed into a delete and add underneath it.
Finally, copying a file's diff from the commit files panel now passes
both paths for a rename, so the copied diff shows the rename instead of
a new-file add.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
In many cases some of the side panels show a lot of empty space; for
example the branches panel when there is only a `main` branch. This gets
worse when `expandFocusedSidePanel` is on (accordion mode), in which
case the almost-empty panel gets even bigger when focused and steals
valuable space from the other panels that do have something to show.
This PR adds a new `gui.shrinkSidePanelsToContent` option which causes
side panels to never show more than their content (plus one blank line,
so it's clear there's nothing more below). This means that panel heights
are now dynamic and may change as their content changes; for example,
when the working tree is clean the Files panel shows only two blank
lines, but as you start changing file, it gets taller to show them.
The option is off by default because it takes some getting used to. It
is also independent of the `expandFocusedSidePanel` option; that one
just makes the effect even more pronounced.
Accordion mode expands the focused side panel, but when that panel has
little content (an empty Files panel, a Branches panel with only master)
it just fills the extra height with blank space. The same waste happens
for any panel that gets more height than it has content to show.
When this option is enabled, each side panel is sized to its own content
(plus a blank line, so it's clear there's nothing more below) rather than
to an equal share of the height. The height a small panel gives up flows
to the panels that have more content than fits; those grow up to their
content and then scroll, weighted toward the focused panel in accordion
mode so the two features compose. Only when every panel fits with room to
spare is the leftover shared out equally, regardless of focus: enlarging
the focused panel there would reveal no more content and would only make
the panels jump around as the focus moves.
The option is independent of expandFocusedSidePanel and off by default.
The status panel, and the stash panel when unfocused, keep their fixed
one-line height as before.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The height thresholds that decide between the proportional layout and
the squashed layout (and, within the squashed layout, between 3-row and
1-row unfocused panels) were hard-coded constants tuned for the fixed
set of five side panels. Now that the panels are configurable, a layout
with fewer panels has less to fit, yet was still forced into the
squashed layout at the same height as five panels would be.
Scale the thresholds down in proportion to the panel count so a smaller
layout keeps using the proportional layout at smaller heights. Only ever
scale down: raising the thresholds for more panels would make them
squash sooner, which works against the reason someone adds panels in the
first place (they want to see them).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A handful of default keybindings differ by platform (e.g. word-wise
cursor movement in text inputs uses alt on macOS but ctrl elsewhere).
Lazygit chooses these based on the OS it runs on, but that's the wrong
signal when the OS isn't where the user is actually typing: someone
running lazygit in a Linux container that they access over ssh from a
Mac gets the Linux bindings, when they'd rather have the Mac ones.
Remapping each binding by hand via config is tedious, so add a single
LAZYGIT_KEYBINDING_PLATFORM override.
Closes#5668.
A handful of default keybindings differ by platform (e.g. word-wise
cursor movement in text inputs uses alt on macOS but ctrl elsewhere).
Lazygit chooses these based on the OS it runs on, but that's the wrong
signal when the OS isn't where the user is actually typing: someone
running lazygit in a Linux container that they access over ssh from a
Mac gets the Linux bindings, when they'd rather have the Mac ones.
Remapping each binding by hand via config is tedious, so add a single
LAZYGIT_KEYBINDING_PLATFORM override.
An unrecognized value falls back to the real OS rather than to the
non-darwin default bindings, since the latter would be an arbitrary
choice.
This PR improves three rough edges around deleting worktrees and the
branches checked out in them:
- **Deleting a branch that's checked out in another worktree now
actually deletes the branch.** The menu used to offer to remove or
detach the worktree but then stop there, leaving behind the very branch
you asked to delete. Both actions now delete the branch afterwards, and
the labels say so ("Remove worktree and delete branch" / "Detach
worktree and delete branch"). The old "Switch to worktree" entry is
dropped — it's not a useful option in the context of deleting a branch.
- **A branch's local branch, remote branch, and worktree can be deleted
in one step.** Picking "Delete local and remote branch" for a single
branch that's checked out in another worktree used to fail with a
confusing "select them one by one" error (which only makes sense for a
multi-selection). It now goes through the same worktree menu, with
labels that make clear the remote is deleted too.
- **Pressing `d` on a worktree can delete its branch.** The plain
confirmation becomes a menu: "Remove worktree", "Remove worktree and
delete branch", and "Remove worktree and delete local and remote
branch".
Throughout, the explicit menu choice acts as the confirmation, so the
separate "Are you sure you want to remove worktree?" prompt is gone; the
dirty-worktree force prompt and the not-fully-merged warning still show
up when relevant.
Closes#5205.
Pressing `d` on a worktree only ever removed the worktree, leaving its branch
behind even though deleting it too is often what you want. Turn the confirmation
into a menu: "Remove worktree", "Remove worktree and delete branch", and "Remove
worktree and delete local and remote branch". The branch-deleting items come
after the plain removal (they do more harm if picked by accident); both are
greyed out for a detached-HEAD worktree, and the local-and-remote one is also
greyed when the branch has no upstream. The plain menu pick is the confirmation,
so the standalone "remove worktree?" prompt is gone (and its now-dead
translation string with it); the dirty-worktree force prompt and the
unmerged-branch warning still appear when relevant.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Picking "Delete local and remote branch" for a single branch that's checked
out in another worktree used to fail with "Some of the selected branches are
checked out by other worktrees. Select them one by one to delete them." That
message only makes sense for a multi-selection; for a single branch there's no
reason we can't remove the worktree and delete both the local and remote branch
in one go. Route that case through the same worktree menu as the local-only
delete, with labels that spell out that the remote goes too. The multi-select
error stays for actual multi-selections.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When you delete a local branch that's checked out in another worktree, the
menu offered to remove or detach the worktree but then stopped there, leaving
the branch you asked to delete still around. Now both actions delete the branch
afterwards, and the labels say so ("Remove worktree and delete branch" /
"Detach worktree and delete branch") to avoid surprises.
Also drop the "Switch to worktree" item: switching abandons the delete the user
asked for, and it's already reachable by checking out the branch or via the
worktrees panel. And drop the now-redundant "remove worktree?" confirmation:
the explicit menu pick is the confirmation (the dirty-worktree force prompt and
the unmerged-branch warning still appear when relevant).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Split the actual worktree removal out of the confirmation in Remove into a
non-confirming helper, and give both Remove and Detach an optional `then`
continuation that runs after a successful removal in place of the default
refresh. Upcoming flows need to delete the worktree's branch once the worktree
is out of the way; threading a continuation through (rather than the caller
firing branch deletion independently) keeps it ordered after the git command
that actually frees the branch. No behavior change yet.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Pull the merged-check-and-force-warning step and the actual git deletion
out of ConfirmLocalDelete and ConfirmLocalAndRemoteDelete into helpers, so
that the upcoming worktree-aware delete flows can reuse them instead of
duplicating the logic. No behavior change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Creating a worktree in lazygit used to be more awkward than it needed to
be:
- The first thing you were asked was whether you wanted a "normal" or
"detached" worktree — a distinction that's confusing to face up front,
and meaningless when you're creating a worktree from a commit, tag or
stash (both choices did the same thing there).
- You then had to type the new worktree's path by hand. That's easy to
get wrong (a mistyped `.worktrees`, for instance), it wasn't clear
whether you were meant to enter the parent folder or the full path, and
it was ambiguous what a relative path would resolve against — especially
when you were already inside another worktree.
- If you picked a branch that was already checked out in another
worktree, lazygit still asked you for a path and only told you it
wouldn't work afterwards.
- There was no quick way to create a new branch and a worktree for it
(sharing the same name) in one step.
This PR reworks the whole flow:
- **No more up-front mode menu.** Pressing `w` on a branch, commit, tag,
stash or remote branch opens a menu whose options are tailored to what
you selected, and each option spells out exactly what it will do — e.g.
"New worktree for 'main'", or "New detached worktree at 'v1.2.0'".
- **You never type a path from scratch.** Lazygit offers ready-made
locations — the folders your existing worktrees already live in, plus an
optional configured default — and shows each as a full path before
anything happens. The folder name is filled in for you from the branch
(or the name you choose). You can still pick "Other…" to type a custom
path.
- **Create a branch and its worktree in one step**, with a single name
used for both. Slashes are preserved, so `feature/foo` gives you a
`feature/foo` branch and a matching nested folder.
- **Branches already checked out elsewhere are caught up front:** the
relevant option is greyed out with an explanation of why, instead of
letting you do the work and then failing.
- **The worktrees panel's `n` is now a single branch picker.** Start
typing, or pick from the list: choosing an existing branch checks it out
in a new worktree, choosing a remote branch creates a local tracking
branch for it, and typing a new name creates a new branch off your
current one — each then simply asks where to put the worktree. Branches
that are already checked out are left out of the suggestions.
There's also a new `worktree.defaultPath` setting to tell lazygit where
to create worktrees by default — useful before you have any existing
worktrees for it to take its cue from. Starting that path with `~/` is
supported (your home dir); this is also supported in the "Other…" path
prompt mentioned above.
Fixes#3230Fixes#4708Fixes#5664
Lazygit runs git directly rather than through a shell, so a literal "~"
reaches `git worktree add` unexpanded and git creates a directory named
"~" instead of using the home directory.
Expand the tilde ourselves, both for paths typed into the "Other"
location prompt and for the worktree.defaultPath config value.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The command was renamed from "View worktree options" to "New worktree",
but its keybinding config key was still 'worktrees.viewWorktreeOptions'.
That name no longer matches the command, and the 'worktrees' section made
little sense: it held a single binding that isn't even used in the
worktrees panel (that panel uses universal.new), only in the branches,
remotes, tags, commits, and stash panels. Other keybinding sections are
named after the panel they're local to; this one wasn't local to any.
Move it to universal.newWorktree, which describes the action and drops the
spurious section, and migrate existing configs automatically.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
RenameYamlKey can only rename a key in place, under the same parent. To
migrate a keybinding from one section to another we need to relocate the
key to a different parent mapping, which is a move, not a rename.
MoveYamlKey creates intermediate maps at the destination as needed and
prunes any maps left empty behind the key, so a section that held only
the moved key doesn't linger as an empty mapping in the user's config.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The old 'n' flow opened a "normal vs detached" menu (the same meaningless
gate the 'w' flow used to have), then asked for a base ref, a path typed from
scratch, and a branch name in three separate prompts.
Replace it with a single picker prompt titled "New worktree for branch",
suggesting local branches not already checked out anywhere, plus remote
branches that don't yet have a local branch of the same name. The entered
value is classified on confirm: an existing local branch checks out into a
new worktree, a remote branch creates a new local tracking branch, and
anything else creates a new branch off the current ref. All three then feed
the same location menu the 'w' flow uses, so paths are chosen from candidates
rather than typed blind. Picking a remote or new branch needs no separate
name prompt — the picker value already is the name. Checked-out branches are
filtered from the suggestions, and a verbatim type-in of one is rejected with
an error.
createWorktree now takes the context to switch focus to once the worktree is
created, so 'n' lands back in the worktrees panel while 'w' still lands in
the branches panel.
This deletes the old NewWorktree / NewWorktreeCheckout core and the now-
orphaned i18n (CreateWorktreeFrom, CreateWorktreeFromDetached, NewWorktreeBase,
NewBranchNameLeaveBlank), completing the migration started for 'w'.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The old flow forced an up-front "normal vs detached" menu (meaningless for
commits, tags and stashes), then asked the user to type a worktree path from
scratch — easy to get wrong, and ambiguous about what relative paths resolve
against. It also offered the same two actions everywhere regardless of what
was selected.
Replace it with per-context "Worktree" menus whose items imply the intent
(new branch + worktree, worktree for an existing branch, detached worktree),
each feeding a shared name -> location -> create pipeline. The location menu
offers candidate parent directories as absolute paths instead of a blank
field, and "Worktree for a branch" is disabled (with a reason) when that
branch is already checked out somewhere, rather than failing after the fact.
Each ref/commit panel binds 'w' in its own controller and calls the matching
typed entry point on the worktree helper, so which menu opens is decided
statically by the call site rather than by dispatching on a ref's dynamic
type. The three commit panels share one menu through BasicCommitsController;
there is no longer a shared worktree-options controller.
The worktrees-panel 'n' flow and its old core (NewWorktree /
NewWorktreeCheckout) are left untouched here so nothing is written and then
rewritten; they migrate, and the dead i18n strings get removed, in a
follow-up commit.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This is the core of "never type a path from scratch": from the repo root,
the configured default path, and the parents of existing worktrees, derive
the ordered list of directories under which a new worktree could be placed.
Pure and unit-tested here; wired into the creation flow in a later commit.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The redesigned worktree-creation flow never asks the user to type a path
from scratch; instead it offers candidate parent directories. Until a repo
has any linked worktrees to learn from, there's nothing to offer, so let
users seed that list with a configured default location.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Custom pagers were not available on Windows because the feature depends
on a working PTY implementation, and the PTY library we are using
doesn't have support for Windows (see
https://github.com/creack/pty/pull/155). This PR adds this support on
our side; the same PTY library is still used on Mac and Linux, but on
Windows we now have our own implementation using ConPTY.
This also enables prompting for SSH passphrases for users who don't have
an ssh-agent running, which previously also didn't work on Windows.
There's one limitation here: pressing `f` in the Files panel means
`fetch --all` by default (unless you turn that off using `git.fetchAll:
false`), in which case passphrase prompting still doesn't work; the
reason is that git spawns a bunch of child processes for each remote to
be fetched, and on Windows these don't inherit the PTY like they do on
Mac and Linux.
Fixes#1453Fixes#5525
ConPTY compresses runs of default-colored spaces into ECH + CUF
(\x1b[NX\x1b[NC) instead of emitting them literally. ECH is still a
no-op for us — our buffer is built sequentially and has nothing to
erase — but CUF has to materialize as N visible space cells so the
gap actually appears, otherwise content the child wrote with leading
indentation slides left against the preceding cell.
The view's cursorForward branch reuses the same machinery as tab
expansion: substitute the trigger byte for a space and let the
repeatCount path emit the cells under the parser-tracked SGR. The
existing notifyCellsWritten plumbing then advances screenCol over
the gap, keeping subsequent CUP targets aligned.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
ConPTY compresses runs of default-colored spaces into ECH + CUF
(\x1b[NX\x1b[NC) rather than emitting them literally. Both currently
fall through the parser's swallow path, so the gap they describe
collapses entirely and content that the child wrote with leading
indentation ends up slid left against the previous cell.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
ConPTY presents its child's output as a screen buffer and uses CUP /
CUD / CNL / VPA to skip over blank rows rather than emitting LFs. The
previous behaviour swallowed all of those and the visible content
collapsed together. Now the escape parser tracks the screen-relative
cursor row, and any CSI that moves the cursor past the current row
emits a cursorDown instruction that the view turns into the matching
number of empty lines.
Column tracking is deliberately omitted: doing it correctly would mean
duplicating the view's grapheme-cluster width math in the parser, and
ConPTY in practice positions to column 1 after a CR-equivalent, which
the existing wx-reset path already handles. ConPTY-internal scrolling
needs no special handling either: it only emits cursor-positioning
escapes within the first, un-scrolled screenful — once its screen
scrolls it switches to plain linefeeds, which the view advances on
directly regardless of the tracked cursor.
Backward cursor moves are silently dropped — the view's buffer is
append-style and can't undo earlier writes. The exception is cursor-home
(CUP to row 1): ConPTY emits it at the start of every screen, so rather
than drop it we re-anchor the row tracking to the current write position.
Without that, a view not rewound in lockstep with ConPTY's screen (the
command log, which streams pty output without a rewind) accumulates
drift, and every later absolute CUP becomes a dropped backward move that
collapses the rows ConPTY positioned with.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
ConPTY presents its child's stdout as a screen buffer and uses CUP
(`\x1b[<row>;<col>H`) to skip over blank rows rather than emitting LFs
for them. Our escape interpreter swallows CUP via the catch-all
"valid CSI final byte we don't implement" branch, so the blank rows
the child put between non-blank ones disappear and the surrounding
lines collapse together — which is what makes the delta-rendered diff
in the screenshot look like its blank lines and section breaks were
removed.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The per-platform getCmdHandlerPty split existed because the Unix side
had creack/pty and the Windows side had nothing — so it fell back to a
non-pty handler. Now that oscommands.StartPty provides a pty on both
platforms, the two files collapse into one cross-platform
implementation and the stub is gone.
cmdHandler grows a 'wait' field because the pty path on Windows spawns
via CreateProcess and never runs exec.Cmd.Start — so cmd.Wait wouldn't
work there. Non-pty handlers set wait = cmd.Wait; pty handlers set it
to the wait closure StartPty returns.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Replace the StartPty stub with a real ConPTY implementation:
CreatePipe + CreatePseudoConsole + PROC_THREAD_ATTRIBUTE_PSEUDOCONSOLE
+ CreateProcess. Pagers and external diff tools now get real terminal
behavior instead of being handed pipes.
One Windows-specific quirk worth flagging: ConPTY does not EOF the
output pipe when the child exits; conhost keeps it alive until
ClosePseudoConsole is called explicitly. A background waiter goroutine
calls ClosePseudoConsole as soon as proc.Wait returns, so callers see
EOF on outRead — restoring the Unix master-fd-EOFs-when-slave-closes
semantics they depend on.
The ErrPtyUnsupported sentinel and the no-pty fallback in newPtyTask
are gone now that both platforms have a real implementation.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Move the pty master behind a small interface (Read/Write/Close/Resize),
and push the actual startup into a platform-specific StartPty function
in pkg/commands/oscommands. The Unix implementation still uses
creack/pty; the Windows implementation is a stub that returns
ErrPtyUnsupported, at which point newPtyTask falls back to a plain cmd
task — matching the existing Windows behavior.
The primitive lives in oscommands rather than pkg/gui because the
cmd_obj_runner pty handler (also in oscommands) is going to consume it
too, and tasks → oscommands is the existing dependency direction.
Same observable behavior on every platform; this just carves out a seam
for a real ConPTY implementation on Windows.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Windows ConPTY can't attach a child process to a pseudoconsole via
os/exec — Go's stdlib doesn't expose PROC_THREAD_ATTRIBUTE_PSEUDOCONSOLE
(golang/go#62708). The ConPTY path has to call CreateProcess directly,
so it can't hand an *exec.Cmd back to the task runner.
Widen NewCmdTask to accept a small Cmd interface satisfied by both
*exec.Cmd (via the ExecCmd adapter) and the Windows ConPTY command type
we're about to add. Change TerminateProcessGracefully to take
*os.Process, which both cmd shapes can provide.
Behavior is unchanged on every platform.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The env var was previously set only on Windows, where the no-op pty
stub was just running the command without a pty and needed to expose
the width to pager scripts another way. With ConPTY coming to Windows
the rationale disappears there, but the env var is documented in
docs/Custom_Pagers.md for pager scripts that can't query the terminal
width directly. Set it on every platform so those scripts remain
portable, regardless of whether a pty is in play.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When conflicts of an in-progress rebase/merge/cherry-pick/revert are
resolved, lazygit pops up a prompt offering to continue it. This is
helpful when you started the operation in lazygit and resolved the
conflicts in your editor. However, the operation can change out from
under it: a coding agent (or the user in another terminal) might
continue or abort it, or advance it to a commit with new conflicts. The
prompt then becomes stale — pressing continue fails with "no rebase in
progress" or acts on the wrong state.
Track whether the prompt is showing, and on each refresh dismiss it if
the operation is no longer in the "resolved, ready to continue" state
that the prompt is offering to act on.
Also, don't even open the prompt in the first place if the rebase or
merge wasn't started from within lazygit. This covers the case where a
coding agent makes a rebase, stops at conflicts, resolves them, and then
takes some more time to fix the build or run tests, in which case
lazygit would show the "continue rebase?" prompt, which is confusing and
undesired.
The only legitimate case that I personally encounter where I start a
rebase myself outside of lazygit is something like `git rebase -x "make
test" <base-of-my-branch>`, in which case there can never be conflicts
if it's done in-place.
Closes#5197.
The prompt offering to continue a rebase/merge is opened from a refresh
and then left to sit until the user acts on it. But the operation can
change out from under it: a coding agent (or the user in another
terminal) might continue or abort it, or advance it to a commit with new
conflicts. The prompt then becomes stale — pressing continue fails with
"no rebase in progress" or acts on the wrong state.
Track whether the prompt is showing, and on each refresh dismiss it if
the operation is no longer in the "resolved, ready to continue" state
that the prompt is offering to act on. This runs on the same refreshes
that would open it (including the background poll and the refresh on
window focus), so the prompt disappears on its own shortly after the
operation moves on.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When conflicts of an in-progress rebase/merge/cherry-pick/revert are
resolved, lazygit pops up a prompt offering to continue it. This is
helpful when you started the operation in lazygit and resolved the
conflicts in your editor. But it's confusing when the operation was
started outside lazygit — e.g. by a coding agent in another terminal
that resolves the conflicts but hasn't continued yet because it's still
running tests or fixing the build. lazygit would then prompt unbidden.
Track whether the in-progress operation was started from within lazygit,
and only show the prompt in that case. We record this right after running
a merge/rebase step (in CheckMergeOrRebaseWithRefreshOptions, the
subprocess branch of genericMergeCommand, and the custom-command
conflict path), and clear it whenever a refresh observes that no
operation is in progress — which also handles an operation that was
finished or aborted externally.
The conflict-resolution tests start their operation by running git
directly (not through lazygit's UI), so they call the new test helper
Common.PretendMergeOrRebaseStartedInLazygit to have lazygit treat the
operation as its own and still get the prompt.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
These started out as a few intermittently-failing integration tests, but
the root cause was real: a handful of places where UI updates
(rendering, model updates, view content) could be applied in a different
order than they were issued, because the order depended on goroutine
scheduling rather than being deterministic. In rare cases that could
make the main view briefly show stale or wrong content — most likely
when moving quickly between items. This was never observed in normal
usage, but caused some integration tests to fail occasionally (both
locally and on CI).
Each commit fixes one of these orderings; see the commit messages for
details.
Update spawned a goroutine per call that then sent on the user-events
channel, so multiple Update calls from the same goroutine could be
reordered by the scheduler — the doc comment even admitted "the order in
which the user events will be handled is not guaranteed." That
non-determinism is a latent source of flaky rendering: code that queues a
model update and then a render in source order could see them run in the
opposite order.
Send on the channel directly instead, so same-goroutine calls arrive in
source order. The send is non-blocking and panics on a full channel
rather than blocking (a blocked send from the UI goroutine would deadlock
against itself) or silently reordering; the buffer is sized generously so
this is unreachable in normal use. UpdateAsync is now identical to Update
and unused, so it's removed along with the shared updateAsyncAux helper.
Copy the outgoing view's content into the target view (the flicker-
prevention step) before queuing the render task, rather than after. The
task writes the fresh content from a worker goroutine, so with the old
order the worker write races the UI-thread copy, and the copy can land
last and clobber the fresh content with stale output.
This is only needed while view writes happen concurrently. Once view
writes are serialized on the UI thread and the view write-mutex goes
away, the synchronous copy always precedes the FIFO-queued write
regardless of order, so the reorder becomes unnecessary. No code comment
is added for it, since that comment would be obsoleted by that work and
likely left behind.
NewTask was incrementing newTaskID and reading taskID inside the
spawned goroutine, so for two NewTask calls in quick succession the
assignment was determined by goroutine scheduling order rather than
call order. When the goroutines reordered, the first NewTask call
could end up with the higher taskID and "win" the staleness check,
superseding the second call's task even though the caller intended
the second to be the latest.
Worse, the staleness check ran after onNewKey, so a goroutine destined
to bail as stale would still reset the view buffer first, potentially
wiping the winning task's already-written output.
Take newTaskID++ synchronously in NewTask so taskIDs follow call order,
and move the first staleness check ahead of onNewKey so a stale task
doesn't side-effect the view before exiting.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Suppress optional locks by default again, except foreground refresh.
Commit d94f2f05 dropped the `GIT_OPTIONAL_LOCKS=0` env var that we used
to set on every git command, and re-added lock suppression only as a
`--no-optional-locks` flag on the background files refresh. The intent
was sound — a foreground `git status` should persist git's refreshed
stat-cache — but the change was too broad: it stopped suppressing
optional locks for every other command too.
The one that bites is the main-view diff. When a folder containing
submodules is selected, we render `git diff --submodule -- <dir>`, and
`--submodule` makes git run `git status` inside each submodule to
describe its "modified" state. That status now grabs the submodule's
index.lock. It runs as a PTY task on its own goroutine, so it races any
submodule-mutating action the user triggers — e.g. resetting a submodule
runs `git -C <submodule> stash`, which then fails with "index.lock: File
exists". This is what made submodule/reset_folder flaky. `git status` is
in fact the only command that takes the optional lock, but the env var
also covered its use inside `git diff --submodule`, inside PTY-run
commands, and inside git's own submodule child processes — none of which
a per-command flag reaches cleanly.
Invert the polarity to match how it worked before d94f2f05: the git
command builder disables optional locks on every command by default, and
the single command that benefits from taking the lock — the foreground
files refresh — opts back in. This restores the original contention
avoidance (including against the user's terminal git) while keeping
d94f2f05's stat-cache-persistence win for the foreground refresh.
This fixes a regression introduced by #5712; labelling this as
"ignore-for-release" because that PR hasn't been released yet.
Commit d94f2f05 dropped the GIT_OPTIONAL_LOCKS=0 env var that we used
to set on every git command, and re-added lock suppression only as a
--no-optional-locks flag on the background files refresh. The intent
was sound — a foreground `git status` should persist git's refreshed
stat-cache — but the change was too broad: it stopped suppressing
optional locks for every other command too.
The one that bites is the main-view diff. When a folder containing
submodules is selected, we render `git diff --submodule -- <dir>`, and
`--submodule` makes git run `git status` inside each submodule to
describe its "modified" state. That status now grabs the submodule's
index.lock. It runs as a PTY task on its own goroutine, so it races
any submodule-mutating action the user triggers — e.g. resetting a
submodule runs `git -C <submodule> stash`, which then fails with
"index.lock: File exists". This is what made submodule/reset_folder
flaky. `git status` is in fact the only command that takes the
optional lock, but the env var also covered its use inside `git diff
--submodule`, inside PTY-run commands, and inside git's own submodule
child processes — none of which a per-command flag reaches cleanly.
Invert the polarity to match how it worked before d94f2f05: the git
command builder disables optional locks on every command by default,
and the single command that benefits from taking the lock — the
foreground files refresh — opts back in. This restores the original
contention avoidance (including against the user's terminal git) while
keeping d94f2f05's stat-cache-persistence win for the foreground
refresh.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This reverts commit eb988395e6, which removed the wrapper on the
grounds that it no longer had anything to do but delegate. We're about
to give it a job again: hosting a git-specific default environment
variable on every command. Restore the scaffolding first, as a pure
behaviour-preserving step, so the behaviour change that follows is
minimal.
It was quite random which version of gofumpt was used depending on how
you invoked it:
- CI would run it via golangci-lint, which we pin to a version that in
turn pins gofumpt to 0.8.0
- running `just format` would use whatever gofumpt is installed locally
(happened to be 0.9.1 in my case)
- saving in VS Code runs it via gopls, so it uses whatever version of
gopls is installed and whichever gofumpt version it bundles (happened to
be 0.10.0 in my case).
So in my case, saving files in VSCode would suddenly reformat them since
I last updated gopls, because the current 0.10.0 version formats code in
a different way. And I don't like some of its choices; this has been
made less aggressive in gofumpt's master (see
https://github.com/mvdan/gofumpt/issues/74), and I'm waiting for a new
release with that behavior before bumping the dependency to the latest
release; until then, pin to 0.9.2.
With the previous order, `go mod vendor` populated vendor/ from the
current go.mod, and only then did `go mod tidy` prune it. If tidy
changed go.mod, vendor/ was left matching the pre-tidy state, so a
single run could leave vendor/modules.txt inconsistent with go.mod
(it took a second run to converge). Tidying first settles
go.mod/go.sum, then vendor rebuilds vendor/ to match in one pass.
This applies both to the `vendor` recipe (justfile and Makefile)
and to scripts/bump_lazycore.sh.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
golangci-lint bundles gofumpt v0.8.0, which formats code differently
from the v0.9.2 we pin in go.mod. Enforcing formatting through
golangci-lint may therefore disagree with `just format`.
Remove gofumpt from golangci-lint's formatters and instead run the
pinned `go tool gofumpt` as a standalone check via a new
scripts/gofumpt-check.sh, wired into CI, `just lint`, and `make lint`.
goimports stays in golangci-lint; it's stable across versions and
nothing runs a competing copy of it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When this was added (dafac52a4c), the job used
golangci-lint-action@v2, which had the problem that its step log was
sparse (it mostly produced PR annotations), so re-running `golanci-lint
run` was a workaround to dump readable errors into the console. The
current version of the action no longer has this problem, so we can
remove that fallback (it would conflict with what we are about to do in
this branch).
When a merge conflict is rendered in the diff3 style, git includes the
common-ancestor section between the two sides. Pressing `b` used to pick
all three, which doesn't make sense; it now picks only the current and
incoming hunks.
Fixes#5486.
`b` on a merge conflict is meant to keep both sides. With the diff3
conflict style git additionally renders the common ancestor between the
two sides, and the old ALL selection kept everything between the
outermost markers, dragging that ancestor into the resolved file.
Rename the selection from ALL to BOTH and restrict it to the top and
bottom hunks so the common base is dropped. Without the diff3 style
there is no ancestor section, so the behaviour there is unchanged.
The user-facing keybinding config was already named pickBothHunks; only
the internal enum, handler, translation and log string still said "all".
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Pressing `b` on a conflict is meant to pick both sides. With the diff3
conflict style, git also renders the common ancestor between the two
sides, and `b` currently keeps that ancestor section too, which is
wrong: the common base is neither side of the merge and must not end up
in the resolved file.
This test captures the current (buggy) behaviour so the follow-up fix
has a clear before/after.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
TestNewCmdTaskInstantStop is flaky: it closes the stop channel from
within start() and asserts the stopped task touched nothing. But Go's
select picks uniformly at random among ready cases, so when opts.Stop
and a data channel are both ready the loop can pick the data channel,
call beforeStart() (which clears the view) and write the prefix before
bailing. In production a task that's already been superseded thereby
clobbers the output the incoming task is about to render.
Check stop with a non-blocking select before each blocking select, so
the stop signal wins whenever it's already closed (Go has no built-in
priority select; this is the idiomatic substitute). The selects keep
their own stop case for liveness, to unblock when stop closes while
parked waiting for data.
TestNewCmdTaskInstantStop is flaky: it closes the stop channel from
within start() and asserts the stopped task touched nothing. But Go's
select picks uniformly at random among ready cases, so when opts.Stop
and a data channel are both ready the loop can pick the data channel,
call beforeStart() (which clears the view) and write the prefix before
bailing. In production a task that's already been superseded thereby
clobbers the output the incoming task is about to render.
Check stop with a non-blocking select before each blocking select, so
the stop signal wins whenever it's already closed (Go has no built-in
priority select; this is the idiomatic substitute). The selects keep
their own stop case for liveness, to unblock when stop closes while
parked waiting for data.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Lazygit only recognizes a handful of escape sequences (mainly for
colors, erasing to the end of the line, and OSC-8 hyperlinks). It would
render all other ones as literal text in the UI, which doesn't make
sense. This wasn't a problem so far because other sequences tend not to
occur in pager output, but we are going to add ConPTY support for
Windows in a later PR, and ConPTY does emit a lot of those escape
sequences, which would then show up as junk in the UI.
While we're at it, also swallow malformed escape sequences instead of
printing them verbatim.
After the previous commit, the escape interpreter still had five paths
that returned an error from parseOne, which view.go handles by rendering
whatever bytes it had accumulated as literal cells. Each of these is a
case where silently consuming the sequence is strictly better than
leaking garbage.
- ';' as the first CSI byte: '\x1b[;5H' is a valid sequence (row
defaults to 1) but we errored on the leading ';'.
- Intermediate bytes in CSI ('\x1b[0 q' = DECSCUSR): the sequence ends
in a final byte we don't implement, so consume and drop.
- Malformed SGR params (empty slot like '\x1b[1;;m'): if outputCSI
fails mid-parse, reset state instead of re-emitting the sequence.
- OSC 8 that isn't actually OSC 8 ('\x1b]8x...'): treat as an OSC we
don't understand and skip to its terminator rather than error-
resetting mid-sequence, which used to leave the rest of the OSC body
to be printed as text.
- The sanity-check overflow paths (too many params, param too long)
now switch to a 'discard until final byte' state rather than
returning the accumulated bytes.
A new stateCSIDiscard centralizes the 'consume bytes until the CSI
final' behavior used by both the intermediate-byte and overflow paths.
errCSITooLong and errOSCParseError are gone with their only callers.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
A text-mode escape interpreter can't do anything meaningful with cursor
positioning, DEC private modes, or terminal resets — but it must still
consume them, not print them as literal text. Before this change, any
sequence outside SGR / EL / OSC-8 errored out of parseOne, and view.go
rendered the unparsed bytes as visible cells. On Windows this would show
up as junk at the start of main-panel output once we add PTY support
using ConPTY, because ConPTY's session-init stream is full of such
sequences.
Three additions to the state machine:
- stateEscape: a single byte in 0x30–0x7E after ESC (e.g. ESC c = RIS)
is a complete Fs/Fp sequence per ECMA-48; consume and reset.
- stateCSI: accept the DEC private-mode prefix bytes (<, =, >, ?), and
accept a CSI final byte (0x40–0x7E) immediately after [ as the end of
a zero-param sequence.
- stateParams: accept any CSI final byte we don't implement as the end
of the sequence rather than a parse error.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The escape interpreter errors on anything outside the handful of
sequences it understands (SGR, EL, OSC 8 hyperlinks), and view.go then
renders the unparsed bytes as text cells.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
For a submodule conflict (where the two branches point the submodule at
different commits, resulting in a `UU` status), pressing space would
show a confusing "Nothing to stage…" error, and enter just stepped into
the submodule; neither is helpful for resolving the conflict. Now both
space and enter open a dialog where you can pick the current commit or
the incoming commit, each shown with its head commit subject so you know
what you're choosing. And the main panel explains the conflict and lists
the commits each side added, so you can see how they diverged before
deciding.
This now behaves very similarly to the way you resolve non-textual
conflicts for text files (e.g. `AU` or `UD`). Speaking of which: for
these it was still possible to press space to stage them, which simply
ran `git add`, whose behavior in this case is to keep the file. This is
neither obvious nor symmetric, so we change this to route space to the
conflict picker too, like enter.
GetOnRenderToMain had grown to handle five distinct rendering cases inline (no
selection, submodule conflict, inline text conflict, non-textual text conflict,
and the normal working-tree diff), which made it hard to follow. Split each case
into its own method so the function reads as a short dispatcher, and pull the
repeated main-view boilerplate into renderToMainWithTask. Pure refactor; no
behavior change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When a conflicted submodule is selected, the main view shows the commits
each side added relative to their common ancestor as two indented logs,
labelled current and incoming, so it's clear which commit each side would
resolve to.
The logs aren't truncated (the view scrolls). If a side added no commits
of its own (e.g. it was rewound to an ancestor of the other), its head
commit is shown instead.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When both sides of a merge moved a submodule's gitlink, git reports it as "UU".
Pressing space used to fall into the submodule no-op guard and pop the confusing
"Nothing to stage..." error, and enter just entered the submodule, which does
nothing to resolve the superproject conflict.
Treat a conflicted submodule like the other non-textual conflicts: both space
and enter now open a picker offering the two candidate commits, "current" and
"incoming", each labelled with its summary. `git checkout --ours/--theirs` is a
no-op on gitlinks, so we resolve by checking the submodule out at the chosen
commit and staging it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
For a non-textual conflict (e.g. DD/AU/UA/UD/DU), pressing space used to run the
normal stage path, which did something unclear: `git add` happens to resolve the
conflict by keeping the file, but that's neither obvious nor symmetric. Route a
single such file to the same Keep/Delete picker that enter opens, so space and
enter agree.
For a range selection that includes one of these conflicts, staging makes no
sense, so disable it with a toast that points the user at resolving them one at
a time. (Entering a range was already disabled with the standard toast.)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Some merge conflicts can't be resolved by editing markers in the merge view;
they require a dialog that picks one side (the "non-textual" conflicts like
DD/AU/UA/UD/DU). Both `enter` and, soon, `space` need to recognize these, so
pull the test into a shared predicate and rename handleNonInlineConflict to
openConflictResolutionMenu to match.
Restructure EnterFile so the predicate is checked first, ahead of the submodule
and inline-conflict branches. This is its final shape: upcoming commits only add
the submodule case to the predicate, with no further reordering. Behavior is
unchanged here, since the predicate is currently false for submodules.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The status panel already binds the universal edit key to "edit config
file", but that's only reachable while the status panel is focused. Add
a dedicated global binding (alt+shift+c) so the config file can be
opened from anywhere.
The status panel already binds the universal edit key to "edit config
file", but that's only reachable while the status panel is focused. Add
a dedicated global binding (alt+shift+c) so the config file can be
opened from anywhere.
The "edit config file" command is about to gain a second, global
keybinding alongside the existing status-panel one. Moving its body into
an action struct (the convention GlobalController already follows for
all its handlers) lets both controllers delegate to one implementation.
OpenFile (`o`) is for opening a file as if it was double-clicked in
Finder/Explorer; this is useful for binary files like PNGs, but never
for text files. You want to edit them, and there's `e` for that.
Lazygit's left-hand side panels — and the tabs within them — have always
had a fixed arrangement. This adds a `gui.sidePanels` option so you can
lay them out the way you want.
You can:
- Reorder the panels
- Hide panels you don't use
- Regroup which panels share a slot as tabs
- Promote a tab to its own top-level panel — e.g. pull Worktrees out of
the Files panel so it's always visible
#### How it works
`gui.sidePanels` is a top-to-bottom list. Each entry is a list of names
that share one panel as tabs. The default is
```yml
gui:
sidePanels:
- [status]
- [files, worktrees, submodules]
- [branches, remotes, tags]
- [commits, reflog]
- [stash]
```
If you want to promote `worktrees` to a side panel of its own, and never
want to see stashes, use
```yml
gui:
sidePanels:
- [status]
- [files, submodules]
- [worktrees]
- [branches, remotes, tags]
- [commits, reflog]
```
Exercises the path the live reload relies on: a per-repo lazygit.yml
sets a different side panel layout, and switching between repos
re-applies each one's own layout (the new-repo path for the cloned repo,
the cached-repo path on switching back).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When the config file changes and lazygit regains focus it reloads the
config, but the side panel window assignments, default views, tab
strips, and z-order were only ever set up on repo entry, so a changed
sidePanels wouldn't take effect until restart. Re-apply it from the
reload path: reassign windows and default views and restore each panel's
default tab.
The focused panel needs care: resetting it to its default tab would
leave the focused tab hidden behind that default tab, so the panel looks
unfocused even though its tab is selected. Re-focus the current context
so its tab stays shown and highlighted; only when the new config hides
the focused panel entirely do we move focus to the default side panel.
Tab strips are already refreshed via configureViewProperties.
Side panel tabs share a window, so which tab is shown is decided by view
z-order rather than the visibility flag (every tab in a window is
'visible'). Tests had no way to assert which tab is actually drawn in
front, which is distinct from which view has keyboard focus. Expose the
window's top view and add an IsActiveTab assertion built on it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Lazygit reloads changed config files when its terminal window regains
focus, but the test harness had no way to simulate that focus event, so
the live config-reload path was untestable. Add a focus event to the
replayed-events queue and expose it through the GuiDriver as FocusIn.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The tab-assignment loop only ever set a view's tabs; it never cleared them.
That was fine when the groupings were fixed, but with gui.sidePanels a
config reload can turn a tab into a standalone panel, and the old tab strip
would linger on its title. Index the tab strips by view name and assign to
every view, so views that dropped out of a multi-tab panel get their tabs
cleared. No change for a given config; this only matters across a reload.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Cover the three things gui.sidePanels enables: reordering the panels
(swapping branches and commits, checked via their jump keys), hiding a
panel (omitting stash, checked by cycling past the last panel and wrapping
to the first), and promoting a tab to its own panel (worktrees becomes a
top-level panel reachable by a jump key, and the files panel's remaining
tabs cycle straight to submodules).
The tests drive focus with explicit jump keys rather than ViewDriver.Focus,
which assumes the default panel layout.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Within a window the visible tab is whichever view sits on top in the
z-order, and onRepoViewReset establishes that z-order from a fixed list
that needn't agree with the configured tab order. After ordering the
views, bring each panel's first configured tab to the top so that, for a
panel whose tabs have been reordered, the configured first tab is the one
shown before the panel is focused. No effect on the default layout.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
In squashed mode (short terminals) the unfocused side panels each reserve
a row and the focused panel takes whatever is left, so once the unfocused
panels' rows fill the height the focused panel collapses to nothing and
panels below it render off-screen. The fixed floor of 9 was tuned for five
panels; with the panel count now configurable (and promotion allowing up
to ten), grow the floor by one per panel so we show the "not enough space"
view instead of a broken layout. Five panels still floor at 9.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
These two views only ever appeared as tabs (of the files and commits
panels), so unlike the other side views they had no title set; the tab
strip supplied their label. Once a tab can be promoted to its own panel
they can appear without a tab strip, so set their titles like the others.
This has no effect in the default layout, where both are always tabs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replace the hard-coded side panel order, tab groupings, and window
assignments with values resolved from the gui.sidePanels config. The panel
order (SideWindows and the layout boxes), the tab strips (viewTabMap), the
per-context window names, each window's default view, and the jump-label
groups all now come from the config rather than from five separate
hard-coded lists.
A panel's window name is the name of its first tab, and panels not listed
in the config get their own window name so their views stay hidden instead
of overlapping a visible panel. Three small lookups translate config names
into views, tab titles, and contexts; a test keeps them in sync with the
set of valid names. The lookups are split this way (rather than one
resolver) because configureViewProperties runs before the context tree
exists, so the title/view lookups must not depend on it.
The config is applied to a repo's contexts via applySidePanelConfig on
every repo entry, including the cached-repo path: a repo's per-repo config
can differ from the previously visited one's, so each repo's contexts must
be (re)assigned from its own config rather than kept from when they were
first built.
With the default config this reproduces today's layout exactly.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The number of side panels is about to become configurable, so a fixed
count of jump-to-panel keys no longer makes sense: a user who configures
six panels shouldn't be forced to also extend jumpToBlock, and one who
hides a panel shouldn't have to trim it. Drop the count check entirely
(individual keys are still validated) and assign keys to panels
positionally, for as many panels as there are keys. Surplus panels go
without a jump key but remain reachable via the next/previous-panel keys.
This also removes the log.Fatal that the count check guarded against.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This adds the user-facing surface for configuring the side panels: their
order, which ones are visible, and how tabs are grouped into panels. Each
entry is either a single panel name or a list of names sharing one panel
as tabs, mirroring how the Keybinding type accepts a scalar or a sequence;
the JSON schema restricts the names to the known set so editors can offer
completion and catch typos. The default reproduces today's layout exactly.
Validation rejects unknown or duplicated names, and requires the files,
branches, and commits panels to always be present: a lot of code focuses
those directly (e.g. after resolving a conflict or popping a stash), so
allowing them to be hidden would let that code focus a hidden panel.
Nothing reads the option yet; the layout still uses the hard-coded order.
Wiring follows in a later commit so the inert surface (and its generated
docs and schema) can be reviewed on its own.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The jump-label prefixes were assigned to each side view by name, twice
(once for the on case, once for off), so the panel-to-views grouping and
the panel order were baked into 28 positional statements. Express the
grouping once as a slice of view groups and loop over it, deriving each
panel's label from its index. The label lookup is now bounds-checked, so
it no longer assumes exactly as many jump bindings as panels. Behavior is
unchanged; this prepares the grouping to come from config.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The remote-branches context is a transient guest that takes over a host
window when you drill into a remote. SubCommits and CommitFiles already
adopt their parent's window via SetWindowName when shown; RemoteBranches
relied instead on its static window name ("branches") matching the remotes
context's window. That assumption only holds while remotes lives in the
branches panel. Adopt the parent's window like the other transient guests
so remote branches render in the right place once panels are configurable.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The three branches of sidePanelChildren each spelled out the five side
windows by name, so the panel order lived in three places and the
status/stash sizing special-cases were tangled into positional literals.
Map each branch over one `windows` slice instead, and fold the
normal-height special-cases (status's fixed height, stash's
collapse-unless-focused) into a single per-window function. Behavior is
unchanged; this isolates the ordering so it can later come from config.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Record the working preference that calls which come up during
implementation (and weren't settled in planning) should be raised and
decided together, not made unilaterally and discovered later in the diff.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Lazygit builds a shell command by interpolating Quote'd arguments into a
template and running the result via `cmd /c`. Several things were wrong
on Windows:
- Quote emitted bash-style `\"…\"` quoting, which cmd.exe doesn't
understand. Making it usable at all previously required a fragile
round-trip through str.ToArgv and re-escaping.
- The assembled command line was handed to `cmd /c` without `/s`, so
cmd's default rules stripped the wrong quotes once the line contained
more than two of them (e.g. a quoted editor path at a location with
spaces, plus a quoted filename that also contains spaces).
- Shell metacharacters were escaped with `^` (`&` → `^&`, etc.), which
neutralised command chaining, pipes, redirection and `%VAR%` expansion
in custom commands.
Quote now emits the standard Windows convention directly, and NewShell
hands cmd.exe the fully-assembled line verbatim via SysProcAttr.CmdLine,
wrapped as `cmd /s /c "<command>"`. The /s flag strips exactly the outer
quote pair we add, leaving each argument's own quoting intact. With the
`^` escaping gone, metacharacters in a custom command reach cmd as the
author intended; this also removes the spurious `^` reported in #3092.
Fixes#5560Fixes#2427Fixes#4147
The unit tests only assert the arguments lazygit constructs; they can't
catch cmd.exe's own quote-stripping, which is where #5560 actually
manifested. This test builds a small editor executable, places it and
the file it opens at paths containing spaces, runs it through real
cmd.exe via NewShell, and checks the editor received the intended args.
It runs only on Windows.
Co-Authored-By: Antoine Gaudreau Simard <a.simard@multidev.net>
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
lazygit builds a shell command by interpolating Quote'd arguments into a
template and running the result via `cmd /c`. Several things were wrong
on Windows:
- Quote emitted bash-style `\"…\"` quoting, which cmd.exe doesn't
understand. Making it usable at all previously required a fragile
round-trip through str.ToArgv and re-escaping.
- The assembled command line was handed to `cmd /c` without `/s`, so
cmd's default rules stripped the wrong quotes once the line contained
more than two of them (e.g. a quoted editor path at a location with
spaces, plus a quoted filename that also contains spaces).
- Shell metacharacters were escaped with `^` (`&` → `^&`, etc.), which
neutralised command chaining, pipes, redirection and `%VAR%` expansion
in custom commands.
Quote now emits the standard Windows convention directly, and NewShell
hands cmd.exe the fully-assembled line verbatim via SysProcAttr.CmdLine,
wrapped as `cmd /s /c "<command>"`. The /s flag strips exactly the outer
quote pair we add, leaving each argument's own quoting intact. With the
`^` escaping gone, metacharacters in a custom command reach cmd as the
author intended; this also removes the spurious `^` reported in #3092.
Fixes#5560Fixes#2427Fixes#4147
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On Windows, NewShell escapes shell metacharacters (`&`, `|`, `<`, `>`,
`%`) with `^` and splits the command into separate arguments. The
operators in a custom command therefore never reach cmd as operators,
so command chaining (`&&`), pipes, redirection and `%VAR%` expansion all
silently break (#2427, #4147, #5113; the stray `^` is also what #3092
reports).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On Windows, Quote wraps arguments in bash-style `\"…\"` and rewrites
embedded double quotes as `"'"'"`. Neither convention is understood by
cmd.exe or CommandLineToArgvW, so commands built from quoted arguments
are mis-parsed once they contain quotes or spaces (#5560).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
`just e2e` used to be the *visible-UI* test runner. Running it with no
arguments launched every integration test in a visible UI — painfully
slow — and it was easy to type `just e2e` out of habit when you actually
meant `just e2e-all` (the headless run-all). This PR reshuffles the
recipes so the common, fast path is the one with the shortest name.
## Recipe changes
| Command | Before | After |
| --- | --- | --- |
| `just e2e` | All tests, **visible UI** (very slow) | All tests,
**headless** (what CI runs) |
| `just e2e <name>` | — (no such target) | That one test, **headless** |
| `just e2e-cli [--slow\|--sandbox\|--debug] <name>` | — | A test in a
**visible UI** (the old `e2e`) |
| `just e2e-tui` | unchanged | unchanged |
| `just e2e-all` | All tests, headless | **removed** (now redundant) |
`just e2e` and `just e2e-cli` accept either a test name
(`submodule/reset`) or a full file path
(`pkg/integration/tests/submodule/reset.go`), and `e2e-cli`/`e2e-tui`
mirror the two `cmd/integration_test/main.go` subcommands (`cli` and
`tui`).
Also added zsh tab-completion for the test names, so `just e2e sub<Tab>`
expands to `just e2e submodule/`, then drills into the tests within.
For running an integration test just to see if it fails or succeeds,
headless mode is sufficient and actually better, because it works in
small terminals like vscode's bottom panel; the "main.go cli" way of
running tests tends to fail there because the layout renders differently
in such a small window. Headless tests use a fixed window size, so they
don't have this problem. It's also slightly faster.
The other vscode tasks (slow and sandbox) are unchanged, they only make
sense with a visible UI.
The integration README still described the raw `go run cmd/integration_test`
and `go test` invocations, which are easy to get wrong (the headless go-test
command in particular) and don't match how we actually run the tests. Rewrite
the running/debugging/sandbox instructions around the justfile's e2e recipes
instead, and point at the optional zsh completion script. Also switch the
test-list regeneration hint to `just generate`, matching the rest of our docs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
just's completion is clap-dynamic and exposes no hook for completing a
recipe's arguments, so `just e2e <Tab>` couldn't suggest anything. Wrap
just's completer: for the e2e/e2e-cli recipes, complete the test names
found under pkg/integration/tests/, delegating everything else back to
just.
The names are fed to _multi_parts so they complete one "/"-separated
segment at a time — an empty <Tab> offers just the categories, then
drills into the tests within a category — and the .go extension and the
shared helper files are stripped so the candidates are exactly the names
the recipe accepts.
Source it from ~/.zshrc (after compinit) to enable; it's a no-op without
just installed and only activates inside a repo with a justfile and a
pkg/integration/tests/ directory.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
`just e2e` was the visible-UI runner, but it's only useful for a single test
(and even then only with --sandbox/--slow); running it without arguments is far
too slow, yet it was easy to invoke by reflex when `just e2e-all` (run all
headlessly) was meant.
Make `just e2e` the everyday headless runner: no arguments runs the whole
suite (what e2e-all did), and a test name runs just that one headlessly via
`go test -run` — which we had no target for before. The visible-UI runner moves
to `e2e-cli`, pairing with the existing `e2e-tui` (the two main.go subcommands).
e2e-all is now redundant and removed.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
With the recently added external change detection, it happens more often
now that we refresh the commits list because an agent made a commit in
the background. In this case, if we keep the selection index the same,
it now points at a different commit, making the main view show a
different commit too, which is confusing and annoying. To fix this,
track the selected commit and range anchor by hash before reloading,
then restore those rows if both hashes still exist. This also allows us
to get rid of some bespoke code that did this for the specific cases of
reverting a commit or cherry-picking commits, because those are now
handled by the generic mechanism.
Starting an interactive rebase (the `edit` command and quick-start) used
to capture the selected commit range by hash before starting the rebase
and restore it afterwards, because new update-ref lines for stacked
branches can shift the commits' positions in the list. The generic
keep-selection-by-hash mechanism now does exactly this for every refresh,
including these, so the bespoke code is redundant.
This relies on the previous commit, which taught the generic matcher to
handle the case where the selected commit turns into a rebase TODO entry
while it's being edited - something the bespoke code handled implicitly
by matching on hash alone.
When restoring the commit selection after a refresh we match by hash and
TODO status. The TODO status is part of the match so that a commit being
reverted or cherry-picked is matched to the real commit rather than to
the rebase TODO entry that shares its hash.
But a selected commit can also change its TODO status across a refresh:
when starting an interactive rebase that stops to edit it, the real
commit becomes a TODO entry. Fall back to matching by hash alone when
there is no exact match, so the selection is still restored in that case.
The next commit relies on this to remove bespoke selection-restoration
code in the local commits controller that matched by hash alone, which
the generic mechanism otherwise wouldn't fully replace.
With the recently added external change detection, it happens more often
now that we refresh the commits list because an agent made a commit in
the background. In this case, if we keep the selection index the same,
it now points at a different commit, making the main view show a
different commit too, which is confusing and annoying. To fix this,
track the selected commit and range anchor by hash before reloading,
then restore those rows if both hashes still exist. This also allows us
to get rid of some bespoke code that did this for the specific cases of
reverting a commit or cherry-picking commits, because those are now
handled by the generic mechanism.
Preparation for the next commit, which selects the newly created commit
after a commit succeeds, while leaving the selection alone on failure.
For now success and failure use the same refresh options, so behavior is
unchanged.
This guards against regressions from the changes that follow. We're
about to add a mechanism that keeps the selection anchored by commit
hash, but we need to make sure that it doesn't take effect here; after a
merge we want to select the newly added merge commit. In the current
state of the code this happens to work because we keep the selection
index the same, which happened to be 0 here; later we will change this
to explicitly select the head commit after the merge.
In a large repo, when touching (editing) more and more files, staging
hunks in lazygit could become slower and slower over time. Specifically,
this happened when you edited a lot of files and then discarded their
changes again. I have seen cases where staging a hunk began to take
seconds; the fix then was to type `git status` on the command line once,
this made it fast again.
The reason was that lazygit was trying too hard to be a good git
citizen, and used the `GIT_OPTIONAL_LOCKS=0` env var on every git
command it made. The consequence was that it never updated the mod date
cache in git's index file, which caused git to rehash every file whose
mod date doesn't match what it recorded in the index, on every refresh.
Typing `git status` updates that cache, which is why this was a
workaround.
Fix this by using the `GIT_OPTIONAL_LOCKS=0` flag only for refreshes
that are running unattended in the background, i.e. the periodic
autoRefresh and the newly external change detection. For those it is
important because it avoids "cannot lock index" errors for commands that
the user might issue at the same time. All other refreshes are user
initiated and no longer use the flag, which is in line with what `git
status` does, so this keeps performance from deteriorating over time.
The wrapper existed to add a git-specific env var to every command. Now
that that's gone, its New/NewShell/Quote methods just delegated to the
inner builder. The only remaining git-specific behavior — the command
runner — is attached in the constructor via CloneWithNewRunner, which
already returns a complete builder, so we can return that directly and
drop the wrapper struct.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
We set GIT_OPTIONAL_LOCKS=0 for every git command we run. That env var
only affects `git status`: it tells git not to take the optional lock it
would otherwise use to write the index back after refreshing the cached
stat information. The intent was to avoid contending for index.lock with
git commands the user runs in a terminal.
The downside is that our `git status` never persists the refreshed
stat-cache. So whenever the working tree's cached stat info goes stale
(e.g. editing files and discarding the changes, or a checkout), every
subsequent status re-hashes the affected files to confirm they're clean,
and stays slow until something else writes the index (such as the user
running `git status` in a terminal).
Fix this by only suppressing optional locks for refreshes that run
unattended in the background; foreground refreshes triggered by a user
action now run a plain `git status` that writes the refreshed index back,
just like the command line does. Background refreshes keep passing
--no-optional-locks so they still can't cause lock contention.
RefreshOptions gains a Background flag that the background routines set,
threaded down to the status command.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Lazygit refreshes its UI when its terminal window gets the focus, which
is enough for the situation where the user makes a commit in their IDE
or in another git client. It isn't enough for the case that a coding
agent makes commits in the background. Improve this by doing a
light-weight poll of the git state in the background, and refresh when a
change is detected.
This adds two settings to control the mechanism:
- `git.autoDetectExternalChanges` (default true) is the on/off switch,
parallel to autoFetch/autoRefresh
- `refresher.externalChangeCheckInterval` (default 2 seconds) is the
poll cadence
Addresses #5554.
Add a 2-second background poll that calls Status.RefsSnapshot and
compares against the snapshot stored at the end of the last refs-
touching refresh. On a diff, trigger a full refresh — same scope as the
focus-in handler, because once we know something changed externally
we can't be sure what (an agent might have created a worktree or
stashed something alongside the commit we detected).
Refresh runs in SYNC mode because goEvery already serializes iterations
via <-done: a slow refresh delays the next tick naturally instead of
letting work stack. The post-refresh hook from the previous commit
updates the snapshot, so in-app commands don't cause the next poll to
spuriously re-fire.
Disabled in the integration test config, like autoRefresh and autoFetch,
because demo replays make repo changes throughout the run; at 2-second
cadence the resulting full refreshes compete with the demo's own
choreography and push some demos past their 40-second timeout.
Also list the two new config keys in checkForChangedConfigsThatDontAutoReload
so a config edit warns the user that lazygit needs a restart.
Add the storage and snapshot-update half of the external-change-detection
mechanism. RefreshHelper now keeps a mutex-protected snapshot string and exposes
accessors for it; Refresh captures a fresh snapshot at the start of any refresh
whose scope set includes COMMITS or BRANCHES.
We capture before reading the git state, not after. Capturing after would let an
external change that lands between the git state read and the snapshot (say, the
next step of a rebase running in another terminal) leave the stored snapshot
newer than what we actually rendered; the poller would then see no difference
and never refresh again, stranding the UI on the intermediate state. Capturing
first keeps the snapshot from running ahead of the render, so if disk moves
during the refresh the next poll catches it.
No reader of the snapshot exists yet — the polling goroutine that consumes it
comes in a later commit. Keeping the snapshot hook in its own commit isolates
the invariant that the snapshot stays in sync with what the UI has observed,
which is what makes the poller's change-detection predicate work across in-app
commands and focus-in refreshes.
Two settings to control the upcoming background polling mechanism:
- git.autoDetectExternalChanges (default true) is the on/off switch, parallel to
autoFetch/autoRefresh
- refresher.externalChangeCheckInterval (default 2 seconds) is the poll cadence
Disabling is the bool's job, not a magic 0 interval, matching the existing
convention.
Not yet referenced by any code.
A cheap fingerprint of local branches and HEAD that future code can poll to
detect when refs have moved externally.
Branches come from a porcelain for-each-ref. HEAD is read directly from
.git/HEAD: that avoids spawning a child process and captures the symref-or-hash
distinction we need to tell "detached at X" apart from "on a branch pointing at
X" — they share a commit hash, which is exactly the situation at the end of a
rebase when HEAD reattaches to the branch. The reftable backend doesn't keep a
real .git/HEAD (it writes a fixed stub), so when we see that stub or the file is
unreadable we fall back to porcelain commands, which are backend-agnostic.
Uses DontLog so a future polling caller won't spam the command log. Not yet
wired up to any caller.
Several downstream conditions in Refresh() relied on multi-scope predicates to
express "if X is in scope, Y also needs refreshing". This makes it hard to add
new code that needs to ask "does this refresh re-read refs?", because the answer
involves mirroring one of those predicates and keeping them in sync forever.
Expand the co-refreshing relationships once, up front, right after the scope set
is built. The downstream conditions then collapse to single-scope checks against
the (now-expanded) set. Behavior is preserved.
Two of the scattered multi-scope conditions are intentionally left as-is because
they express subsumption rather than co-refresh (one branch already does the
work of another internally — expanding would cause double-refresh), and one
expresses mid-function coupling on a flag set inside the COMMITS/BRANCHES block.
The schema annotated refreshInterval and fetchInterval with minimum=0,
but the background routines reject a value of 0 (they require
interval > 0 and otherwise log it as invalid and disable the feature).
So 0 is not actually a valid value; switch to exclusiveMinimum=0 so the
schema matches what the code accepts.
Several commands (rewording or amending an earlier commit, custom patch
operations, etc.) are implemented by starting an interactive rebase that
stops at a commit, amending it, and continuing. When no conflict occurs,
the user isn't meant to notice a rebase happened at all.
But a background file refresh can fire while the rebase is mid-flight
and render a dirty working copy of whatever the behind-the-scenes rebase
is doing (e.g. applying a custom patch).
To fix this, we pause the background routines for the duration of any
waiting-status operation — exactly the window in which lazygit is
driving the git operation itself and will refresh once at the end. The
boundary is also right for the conflict case: when a rebase stops on a
conflict the operation returns, the pause releases, and background
refreshes resume for the interactive resolution that follows.
Several commands (rewording or amending an earlier commit, custom patch
operations, etc.) are implemented by starting an interactive rebase that stops
at a commit, amending it, and continuing. When no conflict occurs, the user
isn't meant to notice a rebase happened at all.
But a background file refresh can fire while the rebase is mid-flight and render
a dirty working copy of whatever the behind-the-scenes rebase is doing (e.g.
applying a custom patch).
To fix this, we pause the background routines for the duration of any
waiting-status operation — exactly the window in which lazygit is driving the
git operation itself and will refresh once at the end. The boundary is also
right for the conflict case: when a rebase stops on a conflict the operation
returns, the pause releases, and background refreshes resume for the interactive
resolution that follows.
Replace the pauseBackgroundRefreshes bool with a count. The single existing
caller (subprocess suspend/resume) is unaffected, but we're about to add a
second, independent reason to pause — lazygit driving a git operation that the
background routines would otherwise catch mid-flight — and the two scopes can
overlap. A bool can't represent "two things both want refreshes paused"; a count
can.
When using delta as a custom pager, and the view is so narrow that delta
needs to wrap long lines, only the last segment of such a wrapped line
would have its background color extended to the right edge of the view,
resulting in a block of lines with a frayed right edge, like this:
<img width="623" height="218" alt="Screenshot 2026-06-18 at 17 25 36"
src="https://github.com/user-attachments/assets/346156af-212f-44c3-b8aa-2a66c23ed836"
/>
Fix this by extending the wrapped line's background colors to the right
edge as well, making it look like this:
<img width="623" height="218" alt="Screenshot 2026-06-18 at 17 25 23"
src="https://github.com/user-attachments/assets/9af46ba3-701b-47ce-b38d-bdffaf5182fa"
/>
Tools like delta paint each diff line's background with '\x1b[K' so
the color reaches the right edge. Up to now the '\x1b[K' handler
appended (InnerWidth - cx) explicit padding cells with the fill bg
so rendering picked up the color. That worked for short lines but
silently degraded once content exceeded InnerWidth: the repeat
count went non-positive, no cells were added, and after wrapping
the partial tail segment was left without any cells carrying the
fill color, so draw() fell back to the view's default bg.
Record the fill colors on the source line as optional
trailingFillAttributes. In the '\x1b[K' handler set them (and drop
the padding-cell loop — the metadata covers both the wrap and the
non-wrap cases). In draw(), once per source line, pick the trailing
cell's fg/bg from the metadata if present and otherwise from the
view defaults; then the inner-loop fills past-content cells with
that.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The sentinel was appended to every \n-terminated line solely so that
draw()'s prevFgColor tracking would reset to default for the trailing
area; without it, an AttrReverse-styled last cell would carry its
rendered bg past the end of the line.
The same prevFgColor mechanism propagated AttrReverse past content on
*unterminated* lines too — which doesn't match real terminal behavior
(try `print '\x1b[7m\x1b[31mfoo'` in a shell: the reverse stops at
the last character) and isn't relied on by anything in lazygit, since
all our writers terminate lines with \n.
Drop the sentinel cell, drop prevFgColor, and just have draw() paint
trailing cells with the view's default fg/bg. The
TestUnterminatedReverseLineExtendsToEdge regression test inverts to
document the new (terminal-matching) behavior, renamed accordingly.
TestWriteString expectations also drop the trailing "" that came
from the sentinel.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The cells of a source line will soon need to carry metadata about how
the line was terminated (newline vs filled to edge via \x1b[K). Move
to a struct so there's somewhere to put it; this commit only renames
[][]cell to []line{cells: ...} with no behavior change.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The four ReplaceAll(str, "\x00", "") calls (and the equivalent
rune-by-rune skip in linesToString) are leftover from when cell.chr
was a rune and \x00 was used as an internal sentinel. With chr now
being a string and no code path writing \x00, the filtering never
strips anything.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Tools like delta emit each diff line with the bg color set, then
\x1b[K to fill the rest of the row with that bg color. When the
content fits within the view's inner width, gocui's \x1b[K handling
appends explicit padding cells and rendering works. When the content
exceeds the inner width, \x1b[K adds no cells (negative repeat
count), the line is wrapped into multiple segments, and the partial
tail segment's trailing cells fall back to the view default bg
instead of continuing the fill color.
Add a test that drives draw() against a tcell mock terminal and
asserts the current (buggy) trailing background.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The next few commits restructure how the view's draw() decides the
fg/bg of cells past the end of a line's content. Pin down three
existing behaviors first so the restructuring stays a refactor:
- '\n' should reset attributes for the trailing area so a reversed
final cell doesn't bleed into empty space.
- An unterminated line with AttrReverse on its last cell should
propagate that to the right edge (otherwise the rendered bg
abruptly stops at the last character).
- '\x1b[K' on a line that fits within InnerWidth should fill the
remaining cells with the current bg color.
Introduce a small WithSimulationScreen helper that swaps in a tcell
mock terminal so tests can call view.draw() and inspect rendered
cells via Screen.Get().
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Lazygit lets you configure multiple pagers and switch between them with
the `|` key. The changes in this PR improve this for the case that you
have more than two.
- **You can see which pager you switched to.** The notification used to
just say "pager 2 of 3"; now it shows the pager's name, so you no longer
have to remember the order to know where you've landed.
- **You can name your pagers.** By default the name is taken from the
pager command, but you can set your own name in the config. This helps
when two entries run the same command with different options (for
example plain `delta` and `delta --side-by-side`).
- **You can cycle backwards.** Alongside `|`, which moves to the next
pager, the new `\` key moves to the previous one — so you can step back
instead of going all the way around the list to return to one you just
passed. This is especially useful when you have two pagers that you
alternate between often (e.g. `delta` and `delta --side-by-side`), but
also have several others in the list that you use only occasionally.
- **Invalid pager setups are caught early.** If an entry combines
options that can't be used together, lazygit now tells you about it on
startup instead of silently producing a broken diff.
With more than a couple of pagers, having to cycle forward through all
of them to reach the previous one (or to back out of an accidental press
of `|`) is tedious. Add a second binding that cycles backward.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A reverse-cycle handler is about to need the same re-render-and-toast
logic. Pull it out first so the behavior change that follows only has to
swap the cycle direction.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When cycling pagers, "Selected pager 2 of 3" gives no clue which pager
you landed on; with several configured you have to remember the order.
Include the pager's name in the toast instead.
The name is normally derived from the first word of the pager command,
but that isn't always enough: two entries can share a command but differ
in options (e.g. "delta" and "delta --side-by-side"), and an entry may
have no command at all (the default entry, or when using
useExternalDiffGitConfig). So add an optional `name` field that
overrides the derived name.
The message was also hardcoded in English; localize it while we're here.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A pager (GIT_PAGER) formats the diff git produces, while
externalDiffCommand and useExternalDiffGitConfig change how git produces
the diff in the first place. They are different pipeline stages, not
alternatives, so combining them on one entry just pipes one through the
other and produces garbled output (e.g. delta trying to parse
difftastic's side-by-side output as a unified diff). The two external
mechanisms likewise conflict, with the explicit command silently
shadowing the git config one. Treat all three as mutually exclusive and
reject configs that set more than one on the same entry.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Staging and unstaging submodules didn't work properly when the submodule
had uncommitted changes of its own (modified or untracked files inside
it). This PR fixes a few related problems:
- **Unstaging a submodule that has both a new commit and uncommitted
changes now works.** Previously, staging such a submodule left it
half-staged, and from there the stage key would only ever try to
re-stage it — there was no way to unstage it again. Now the stage key
toggles it back to unstaged as expected.
- **Trying to stage a submodule that has nothing stageable now explains
why.** When a submodule's only changes are uncommitted content inside it
(with no new commit), there's nothing the parent repository can stage.
Instead of the keypress silently doing nothing (except briefly flashing
the status to staged and then back to unstaged), lazygit now shows an
error explaining that you need to commit inside the submodule first.
- **The stage key (space) and the stage-all key (`a`) now behave
consistently.** All of the above applies equally whether you act on the
submodule directly or use "stage all", and "stage all" no longer gets
stuck or behaves differently from the stage key just because a submodule
with uncommitted changes is present in the list.
Fixes#3641.
A submodule that only has dirty or untracked content (no new commit) can't
be staged from the parent repo, but it still shows up as having unstaged
changes. Pressing stage on it therefore briefly flashed as staged and then
reverted, without explaining why nothing was staged.
Detect this case (via `git submodule status`, where a '+' prefix marks a
stageable commit change) in the shared stage/unstage decision: if the only
thing that looks stageable is such a submodule, don't try to stage it.
Instead unstage if there's anything staged to unstage, so the toggle stays
symmetric; otherwise show an error explaining that there's nothing to stage.
Because the decision is shared, this covers both the stage (space) and
stage-all (a) keybindings.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This map only feeds the optimistic rendering that makes staging feel
instant; it doesn't affect the eventual status, which git reports after
the refresh. The "MM" entry can never be reached for a regular file: a
file at "MM" has stageable unstaged changes, so pressing space stages it
rather than unstaging, and the unstage path is where this map is used. The
only thing that reaches the unstage path at "MM" is a submodule whose
commit is staged on top of dirty content, so this entry exists purely to
update that submodule instantly instead of waiting for the next git
status.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Before the staging decision was unified, the stage (space) and stage-all
(a) keybindings each made their own decision, so a fix to one wouldn't
reach the other. Extend the test to drive the submodule through stage-all
as well, guarding against that asymmetry coming back.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The stage/unstage toggle decides what to do based on whether a node has
unstaged changes: if it does, it stages; otherwise it unstages. For a
submodule this breaks down, because dirty or untracked content inside the
submodule always reports as an unstaged change in the parent repo but can
never be staged from there. Once such a submodule's commit pointer is
staged it sits at "MM", and every subsequent press keeps trying to stage
the unstageable dirty content, so it can never be unstaged.
Treat a submodule's unstaged change as stageable only when its commit
isn't already staged, so that a staged submodule unstages on the next
press regardless of leftover dirty content. Because the decision is now
shared by press and stage-all, this fixes both at once.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
pressWithLock (acting on the selection) and toggleStagedAllWithLock (acting
on the whole tree) each independently decided whether to stage or unstage,
ran the optimistic update, and logged the action. That duplicated decision
has already drifted: the tracked-files filter was added to press months
before it was applied to stage-all, and fixes to one have repeatedly had to
be chased into the other.
Extract that shared decision into toggleStaged, leaving each caller to
supply only the git commands it runs (per-path for the selection, bulk
add -A / reset for the whole tree — the latter is required because the tree
root node has an empty path, so a per-path stage wouldn't work). This is a
pure refactor: the two callers' decisions were already equivalent, so
behavior is unchanged. It exists so the next change to the staging logic
only has to be made once.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When a submodule has both a new commit (which the parent repo can stage)
and dirty working-tree content (which it can't), staging it lands on a
"MM" status. Pressing space again should unstage it, but instead it tries
to stage the dirty content over and over, so you can never get back to an
unstaged state.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Supports loading direnv's environment files (`.envrc`) when switching
repos or worktrees, or when entering or exiting submodules.
There's no configuration for this; the functionality is automatically
enabled when direnv is installed.
Closes#3653.
When a user switches into a repo whose .envrc hasn't been approved with
`direnv allow`, the previous behavior was to drop a "blocked" error
popup and leave the user to fix it externally. That meant opening a
terminal, running `direnv allow`, and then either restarting lazygit or
switching repos and back to refresh the env — easy to get wrong, easy
to forget.
When `direnv export json` exits non-zero, follow up with `direnv status
--json` to ask direnv whether the current directory has a not-yet-
allowed .envrc, and if so, get its path. Then show a confirmation popup
with the .envrc contents inline so the user can read what they're
approving. Confirming runs `direnv allow <path>` and re-runs the load
so the new env reaches subprocesses immediately; cancelling leaves the
env unloaded (the same state as before this commit when direnv refused
to load the .envrc).
Using `direnv status --json` instead of parsing the "is blocked"
stderr line means we rely on direnv's structured output rather than
its human-readable error format, which is more stable across versions
and avoids assumptions about output formatting.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When a user opens a repo from the recent-repos menu or jumps between
worktrees inside lazygit, only the env vars present at process startup
reach subprocesses. That breaks pre-commit hooks and other tools whose
dependencies are pulled in by a per-repo .envrc — users were left with
read-only operations because the env their shell would normally load via
direnv never made it into lazygit's git invocations.
Shell out to `direnv export json` after each chdir and apply the JSON
delta via os.Setenv/Unsetenv. direnv tracks the previous load in its own
DIRENV_DIFF env var, so the delta also unloads vars from the old repo
when entering one without a matching .envrc. If direnv isn't on PATH the
call is a no-op, so users who don't use direnv pay nothing and users who
do need no config to opt in. Any stderr direnv emits (loading messages,
"blocked .envrc" errors, etc.) goes to the command log.
The integration test puts a fake direnv on PATH and asserts that a value
it exports reaches a custom command after switching repos. Wiring this
up needed runner.go to support `{{actualPath}}` placeholders in
ExtraEnvVars, mirroring the existing support for ExtraCmdArgs, so the
test can prepend a fixture-relative directory to PATH.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
If we return the error here, we don't switch repos, but the chdir
happened already, so this would be an inconsistent state (a lot of
lazygit's code assumes that the current directory is always the worktree
root). Only log the error; failing to record the current directory is
not the end of the world.
Also, it is very unlikely to happen; RecordCurrentDirectory only writes
to a small file, and if this fails, then either there is filesystem
corruption of the disk is full, and in both cases the user likely has
much bigger problems.
Commit 4f0393f97b caused a regression: for operations that use
WithWaitingStatusSync (examples are squashing fixups, moving commits up
or down, cherry-picking, creating fixup commits, and more), the waiting
status wouldn't show during the operation; however, it would show after
the operation was done, and then linger forever.
The cause: since 4f0393f97b, layout sizes the bottom line from the
actual content of the AppStatus view rather than from the status
manager. The async render path keeps the view in sync (it sets the
buffer on the first tick and clears it to "" when the status ends), but
the sync path used by WithWaitingStatusSync did not:
- It called ForceLayoutAndRedraw before writing anything to the view, so
layout saw an empty buffer and left no room; the status never appeared
during the operation.
- When the operation finished it just broke out of the loop, leaving the
last spinner frame in the buffer. Every subsequent layout kept reserving
room for that stale content, so the status stuck around forever.
Fix this by writing the status into the view before the initial layout,
and clearing it again when stopping.
Commit 4f0393f97b caused a regression: for operations that use
WithWaitingStatusSync (examples are squashing fixups, moving commits up or down,
cherry-picking, creating fixup commits, and more), the waiting status wouldn't
show during the operation; however, it would show after the operation was done,
and then linger forever.
The cause: since 4f0393f97b, layout sizes the bottom line from the actual
content of the AppStatus view rather than from the status manager. The async
render path keeps the view in sync (it sets the buffer on the first tick and
clears it to "" when the status ends), but the sync path used by
WithWaitingStatusSync did not:
- It called ForceLayoutAndRedraw before writing anything to the view, so layout
saw an empty buffer and left no room; the status never appeared during the
operation.
- When the operation finished it just broke out of the loop, leaving the last
spinner frame in the buffer. Every subsequent layout kept reserving room for
that stale content, so the status stuck around forever.
Fix this by writing the status into the view before the initial layout, and
clearing it again when stopping.
If a keybinding that we want to display in the options bar was set to
`<disabled>` by the user, in pre-0.62 versions we would still display
the command, but with no keybinding. This was arguably not very useful
before, but now it actually crashes because we would now try to display
the first key of the slice of configured keys (crash introduced in
3d18ee8f91). Fix the crash by not showing those commands at all.
This doesn't make a difference for the behavior, it just looks strange to
include the empty bindings first and then filter them out in the next statement.
If a keybinding that we want to display in the options bar was set to <disabled>
by the user, in pre-0.62 versions we would still display the command, but with
no keybinding. This was arguably not very useful before, but now it actually
crashes because we would now try to display the first key of the slice of
configured keys (crash introduced in 3d18ee8f91). Fix the crash by not showing
those commands at all.
Ctrl+s used to be a separate binding confirmInEditor-alt, but now that
it was folded into the main confirmInEditor, we need to mention both
bindings here.
Also use the new syntax while we're at it.
Ctrl+s used to be a separate binding confirmInEditor-alt, but now that it was
folded into the main confirmInEditor, we need to mention both bindings here.
Also use the new syntax while we're at it.
This change enables Lazygit `git-flow` integration to work with
`git-flow-next`. The "official" `git-flow` has been deprecated and
replaced by `git-flow-next`. `got-flow-next` has the same tool and most
of the functionality is compatible but the `git config` is different so
Lazygit doesn't recognise it.
- Support gitflow.branch.<type>.prefix (git-flow-next) in addition to
gitflow.prefix.<type> (legacy)
- Refactor FinishCmdObj to use a prefix map lookup to find the branch
type
git-flow-next (https://github.com/gittower/git-flow-next) uses a
different config schema than legacy git-flow:
gitflow.branch.<type>.prefix instead of gitflow.prefix.<type>.
Recognize both schemas in GetGitFlowPrefixMap by querying each and
merging into a single prefix → branchType map. GitFlowEnabled now
consults the merged map so a next-only setup counts as enabled.
When both schemas configure the same prefix, the legacy entry wins.
In normal usage both schemas agree, so the rule mainly matters as a
deterministic tie-breaker.
Lift the inline parsing in FinishCmdObj into parseGitFlowPrefixMap on
ConfigCommands. The caller now does a direct map lookup against the
parsed prefix → branchType map instead of iterating the raw config
output and suffix-matching. This is preparation for adding git-flow-next
support, which needs to merge a second config schema into the same map.
One incidental change: a branch name without a slash now returns
NotAGitFlowBranch immediately, rather than falling through the
line loop with an empty suffix. Previously a configured
gitflow.prefix.X whose value happened to equal the entire branch
name could match — never a useful outcome.
The previous logic only re-rendered the main view when the side panel itself was
focused. When the user pressed `0` to focus the main view, the
Normal/NormalSecondary context becomes Current and the equality check failed, so
cycling pagers had no visible effect. Mirror the pattern from postRefreshUpdate:
when the main view is focused, call HandleRenderToMain on the side panel below
it on the stack (which CurrentSide already returns).
Keybindings in the user config file can now either be a single string as
before, or a list of strings, in which case the action can be triggered
by any of them.
This has two benefits:
- users can add alternatives that they want to use occasionally. One
example is the `<esc>` key: some users are used to typing it as `ctrl+[`
because this used to be possible in the legacy terminal protocol. With
recent changes to lazygit's keybinding system this no longer works out
of the box, since `<esc>` and `ctrl+[` are now distinct keys that can be
bound separately. But users who want the two to behave the same (as in
the old days) can now do
```yml
keybinding:
universal:
return: [<esc>, "ctrl+["]
```
- we can get rid of all those `XyzAlt` bindings that we used to have,
for cases where we already wanted to have alternate keybindings by
default (for example `<up>`/`<down>` and `j`/`k` for going up and down
in a list). These can now be expressed a lot more elegantly, and require
less code.
The `XyzAlt` bindings are marked as deprecated but they are still
supported. We could instead have added a
migrator that changes users' config files and gets rid of the alt
configs for good already; I decided not to do that, because this would
render the config file invalid for older versions of lazygit, which
would then refuse to start; and that's annoying when bisecting bugs.
We'll keep the deprecated configs in the code for a year or so, and then
add the migrator.
Convert the remaining *Alt/*Alt[12] sibling fields (PrevItem/NextItem,
GotoTop/GotoBottom, PrevBlock/NextBlock, ScrollUpMain/ScrollDownMain,
OptionMenu, ConfirmInEditor, DiffingMenu) so the merge mechanism folds
their values into the corresponding main multi-key binding at config
load. The redundant alt-only Binding registrations across the various
controllers and the global keybindings file are gone: the merged main
field already carries every key, so the for-loop in SetKeybinding
registers them all.
Previously the patch_explorer and merge_conflicts controllers reused
Universal.PrevBlock/NextBlock for moving between hunks (or conflicts) in the
main view, sharing keys with the global side-window cycle. The two operations
are conceptually distinct: cycling side windows is a global navigation gesture,
while next/prev hunk acts on the diff in the main view. Tying them together also
blocks adding <tab>/<backtab> as side- window-cycle keys, because <tab> already
means "toggle panel" in the staging view.
Add Main.PrevHunk/NextHunk to the existing KeybindingMainConfig (which already
groups bindings for the main view across staging, patch building, and merge
conflicts) and switch both controllers to it. The defaults match the active key
set those controllers had before (<left>/<right>/h/l), so the user-visible
behavior is unchanged.
Now that quit accepts multiple keys, the historical quit-alt1 field is
redundant: existing configs that set it should keep working without the user
having to migrate, but the lazygit code shouldn't have to register the alt
binding separately.
Add a merge step that runs after the user config is loaded (and from
NewDummyAppConfig, which the cheatsheet generator and integration tests go
through) folding the alt value into the main key list. Mark QuitAlt1 deprecated
so it disappears from the generated Config.md example, while staying in the JSON
schema with a description so editors can still steer users toward the new form.
Note that instead of marking the alt config as deprecated, we could have added a
migrator that changes users' config files and gets rid of the alt config for
good. I decided not to do that, because this would render the config file
invalid for older versions of lazygit, which would then refuse to start; and
that's annoying when bisecting bugs. We'll keep the deprecated configs in the
code for a year or so, and then add the migrator.
The next commit will fold the remaining ~15 -alt-style fields the same way; the
helper is shaped to keep that mechanical.
CustomCommand.Key and CustomCommandMenuOption.Key are user-configured
keybindings just like the built-in ones. Converting them to the Keybinding type
lets a user assign multiple keys to the same custom command, e.g. `key: [a, b]`,
the same way they would for any other keybinding.
The validator iterates over the elements rather than checking a single string,
the binding registration goes through GetValidatedKeyBindingKeys to register
every alternate, and the existing error messages use .String() so a multi-key
binding renders sensibly.
CustomCommandPrompt.Key (a form field name, not a keybinding) stays a plain
string.
JumpToBlock is special: each of its 5 elements is the binding for one side
window (status / files / branches / commits / stash), not an alternate for a
single command. Change the field from []string to []Keybinding so each window
slot can have alternates of its own.
The schema becomes "an array of 5 keybindings, each itself a string or array of
strings", which falls out cleanly from how the Keybinding type inlines into the
generated schema. Existing configs (a flat array of 5 strings) keep validating
because each element is unmarshalled through Keybinding's scalar-or-sequence
decoder.
Until now every keybinding config field was a plain string. That meant a user
couldn't ask for two keys to invoke a command — the config silently accepted
only one form.
Convert every string-typed field across all 13 KeybindingXxxConfig structs to
Keybinding so the union type extends to every command. Defaults wrap their
single-key value in Keybinding{...} so the generated Config.md still renders one
scalar key per binding.
The alt fields keep their separate Binding registrations for now: this commit
does not yet introduce the merge mechanism that folds them into the main field —
that comes in a follow-up. Consumers previously calling opts.GetKeys on a string
field now call opts.GetKeys on the Keybinding, or take .String() / Keys[0] where
a single value is needed.
Adds a Keybinding.String helper for rendering, schema-generator work that
inlines the Keybinding union into each consuming property, and a unit test
covering the user-facing scalar/sequence YAML forms for quit.
Each user-configurable keybinding is currently a single string in the YAML
config. To let users assign alternate keys to a command, introduce a Keybinding
type that decodes from either a scalar (the existing single-key form, kept for
backward compatibility and for a simpler config file) or a sequence of strings.
Marshalling collapses single-element slices back to a scalar so configs and
generated docs round-trip cleanly.
JSONSchema describes the type as a oneOf union so editors validate either form;
subsequent commits will inline the union into the generated schema and start
using Keybinding as the field type.
The cheatsheet has been showing only the first key of each binding
since Binding.Key became Binding.Keys; collapse the list back into a
single comma-separated cell so users can see all the alternates at a
glance once bindings start carrying more than one key.
This is a pure refactor in preparation for letting users configure multiple
alternate bindings for a single command. Every Binding still has exactly one
key, so nothing changes visibly: the cheatsheet, the on-screen options bar,
and the keybindings menu all render identically.
When a Binding ends up with multiple keys, the on-screen options bar will
show only the first (to avoid clutter); the cheatsheet will show all of them (in
a later commit). For now both paths take Key[0].
MenuItem.Key is changed in the same way, it also has a slice of keys now.
In this commit we keep the name `Key` in Binding, KeybindingOpts and MenuItem,
instead of renaming them to `Keys` right away, in order to keep the diff a bit
more readable. We'll do the rename separately in the next commit.
Constructing a menu item key from a literal character requires
gocui.NewKeyRune('r'), which is a bit noisy. Add a private menuKey helper in
both the controllers and helpers packages so the common case in either reads as
menuKey('r'). Duplicating the one-liner is cheaper than a cross-package import
dependency and avoids forcing every controller file to qualify the call.
The reason for doing this now is that we are going to change MenuItem.Key to a
slice of keys later in the branch, which means we'd have to add `[]gocui.Key{`
at each call site, making them even more noisy. With the menuKey helper we can
just change its signature and leave all clients unchanged.
For legacy reasons, OptionMenu was set to `<disabled>`, and OptionMenuAlt1 to
`?`. This doesn't make a lot of sense any more; get rid of OptionMenuAlt1 and
bind OptionMenu to `?` by default. This is a breaking change for users who
rebound OptionMenuAlt1 in their config, but it doesn't strike me as very likely,
and it's easy enough to fix.
Shell.RunShellCommand was passing os.Environ() to its child, while its
sibling runCommandWithOutputAndEnv has used the minimal
NewTestEnvironment since late 2023 when env isolation was introduced;
the sh path was just missed.
This matters when integration tests run from inside a `git rebase -x`
exec in a linked worktree: git sets GIT_DIR=<main>/.git/worktrees/<name>
for the exec, and it leaks all the way down through bash, just, go test,
and the test process, into every git invocation RunShellCommand spawns.
cmd.Dir becomes irrelevant — git resolves GIT_DIR over cwd-based
discovery, with the work-tree taken from the gitdir file (i.e. the
worktree root). So `git checkout -b conflict` in a test fixture creates
the branch on the real worktree and switches its HEAD, hijacking the
in-progress rebase and trashing the working tree. (In the main worktree
git doesn't set GIT_DIR for rebase exec, which is why the bug was only
visible from linked worktrees.)
Using self.env also incidentally restores GIT_CONFIG_GLOBAL for shell
commands, so commits made via RunShellCommand are now authored by the
test config's CI identity rather than whatever the host's ~/.gitconfig
resolves to.
After fetching, we auto-forward main branches that have fallen behind
their upstream, but skip any that are currently checked out in another
worktree — otherwise we'd update the ref behind that worktree's back,
leaving its working copy showing the inverse of what was just fetched.
The skip check had a hole though: when starting lazygit while no
worktrees have a main branch checked out, leaving it running in the
background, and then checking out a main branch in one of the other
worktrees outside of lazygit (e.g. in a lazygit instance in another
terminal, or using `git checkout` in the shell, or using some other git
client or IDE), then lazygit wouldn't notice the change, and the next
fetch would auto-forward main even though it is now checked out in a
worktree.
The fix is to include `WORKTREES` in the post-fetch refresh scope when
auto-forwarding is enabled. We gate on the config so users with
auto-forward disabled don't pay for an extra `git worktree list` plus
per-worktree rev-parse on every fetch tick.
A few small things picked up along the way landed as separate commits
first:
- Preserve the empty-slice fallback in `loadWorktrees` when `git
worktree list` fails — the fallback was being overwritten by the nil
return value on the next line.
- Add `PULL_REQUESTS` to the manual fetch refresh scope to match the
background fetch; looks like an oversight from when PR support was
added.
- Extract `BranchesHelper.PostFetchRefresh` so the two fetch paths can't
drift again.
Fixes#5020.
AutoForwardBranches relies on the worktree model to skip any branch
that's currently checked out in another worktree (so we don't update
its ref behind the worktree's back). The post-fetch refresh wasn't
including the worktrees scope, so any external change to the worktree
list between lazygit's startup and the fetch — a `git worktree add`,
a `git checkout` in a linked worktree, a branch rename — left the
in-memory model stale and the skip check returned false negatives.
Add WORKTREES to the post-fetch refresh scope when auto-forwarding is
enabled. We gate on the config so users with auto-forward disabled
don't pay for an extra `git worktree list` plus per-worktree rev-parse
on every fetch tick.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When the linked worktree's branch is changed externally — by another
shell, by another tool, or by git running outside lazygit — lazygit's
worktrees model goes stale. The next post-fetch auto-forward then
doesn't realise the branch is now checked out elsewhere, and advances
its ref behind the worktree's back. The worktree's HEAD then resolves
to a commit its index/working tree haven't been updated to, and the
user sees that diff as the inverse of what was fetched — files
appearing as pending changes that they didn't make.
The test sets up a linked worktree initially on a side branch, then
externally checks out master in it before pressing fetch. Two
EXPECTED/ACTUAL pairs capture the symptoms: the branches view shows
master as `✓` rather than `↓1`, and switching to the linked worktree
shows master's would-be incoming file as a pending deletion against
HEAD.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The post-fetch logic was duplicated in `backgroundFetch` and the manual
fetch handler: refresh a fixed set of views, then auto-forward branches
if the fetch succeeded. The two had already drifted on the refresh
scope; folding them into a single helper makes the duplication go
away and prevents it from drifting again.
Pass the fetch error through so we preserve the previous behaviour of
refreshing unconditionally but only auto-forwarding on success.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The background fetch path already includes PULL_REQUESTS in its
post-fetch refresh scope, but the manual fetch from the files view
doesn't. As far as I can tell that's an oversight from when
PULL_REQUESTS was added — there's no reason the two paths should
differ. Align them so both refresh PRs after fetching.
This also sets up the next commit to extract a shared helper for
the post-fetch refresh.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
If `git worktree list` fails, we want the Worktrees model to fall back
to an empty slice so callers iterating over it stay correct. The error
branch was setting it to `[]`, but the line below unconditionally
overwrote it with the nil `worktrees` value from the failed call.
Use an else branch so the empty-slice fallback actually sticks.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Compile them only once at startup. I didn't measure if this makes a difference,
but it's easy to do, and now that we potentially need to check them more often,
it might be worth it.
The services config has been the path for GHE for a while (for the
View-PR-URL feature) but it now does double duty: it's also what enables
the branches-panel PR icons for non-github.com hosts. Worth calling out
explicitly so users don't assume it's still github.com-only.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The branches-panel PR icons only worked for github.com remotes. There was no
fundamental reason — the auth library we already vendor (cli/go-gh) supports
enterprise tokens out of the box (GH_ENTERPRISE_TOKEN, gh auth's keyring),
and the user-facing 'services' config has long been the documented way to
tell lazygit "this domain is a github service" for the View-PR-URL feature.
The fetcher just hardcoded github.com in three places:
- a substring check on the remote URL to decide we're "in a github repo",
- the GraphQL endpoint (always api.github.com/graphql), and
- the auth lookup (always against the default host).
Plumb the resolved web domain through instead. Detection now goes through
the hosting_service ("is this remote's provider 'github'?"), which means a
user with services: { 'git.acme.com': 'github:git.acme.com' } configured
gets PR icons on their GHE remotes too.
Replacing the substring check with a provider check also tightens a latent
bug in getGithubRemotes: it previously accepted any remote whose URL parsed
with the default regex, including gitlab and bitbucket — masked today only
by the InGithubRepo gate, but exposed once the gate goes away.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The github pull-request fetcher needs to know whether a given remote is a
github-type service, which host its API lives on, and which owner/repo to
query against. Today the fetcher hardcodes the first two ("does the URL
contain github.com" and "https://api.github.com/graphql") and re-derives
owner/repo from the remote, which precludes GitHub Enterprise and makes
the fetch entry point take more arguments than it needs.
Add an accessor on the hosting service manager that exposes the already-
resolved service domain together with the parsed owner/repo, so callers
can answer all of these questions without reaching into the manager's
internals.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
After cherry-picking a commit, copying a range-selection of commits was
broken in that it would copy only the last selected commit rather than
all of them.
After a successful paste DidPaste is true, hiding the "X commits copied"
indicator but leaving the buffer populated. From the user's perspective
this looks like a clean slate, so a new shift+C should start fresh. It is
important to reset DidPaste first, before populating the buffer with the new
commits, because otherwise each loop iteration would overwrite the previous one
since Add() rebuilds the set via SelectedHashSet() which returns empty while
DidPaste is set.
After a successful paste, the "X commits copied" indicator hides and
DidPaste is set, but the buffer is not cleared. If the user then
range-selects multiple commits and presses shift+C, every Add() call
rebuilds the set via SelectedHashSet(), which returns empty while
DidPaste is true; each iteration of the copy loop therefore overwrites
the previous one and only the last commit in the range survives.
As a followup to #5571, improve performance for inline spinners too.
This requires a bit of preparation; in particular, we change
ListContextTrait.HandleRender to no longer force a UI layout/redraw, so
callers need to take care of this themselves where needed. This requires
careful testing to see that we didn't miss any situation where redrawing
only worked by accident; see the first commit of the branch for an
example.
Now that HandleRender no longer does an implicit Render(), we can use it inside
OnUIThreadContentOnly to save performance, on the assumption that rerendering a
view that contains an inline spinner never changes the layout.
self.c.Render() at the end of HandleRender was there to schedule a gocui Update
tick so the view content modified above would actually get drawn. For UI-thread
callers (the great majority -- keybinding handlers, the layout function itself,
popup resize, etc.) this was unnecessary work, since gocui already runs a
layout/redraw cycle after every event. SimpleContext.HandleRender doesn't call
Render() either, so this aligns the two implementations.
The few callers that drove HandleRender from a worker goroutine and relied on
Render() for the flush were wrapped in OnUIThread in the preceding commits, so
the implicit Render is no longer needed.
Also, Render() being called *before* setFooter() looks like it might have been a
theoretical race; this is no longer an issue now.
The redraw of the selection color (using <space>) would be tied to the
spinner drawing. To reproduce, having a high spinner refresh rate and
toggling a file would see a delay equivalent to the time spinner refresh
rate.
SetSuggestions has two callers: prepareConfirmationPanel calls it directly on
the UI thread, while editors.promptEditor and
SuggestionsContext.RefreshSuggestions call it via AsyncHandler, which runs the
result closure on a worker goroutine. The worker path currently relies on
HandleRender's self.c.Render() to flush the view update. Wrap the body in
OnUIThread so the worker path stays correct when Render() is removed; for the
UI-thread caller the extra bounce is harmless.
refreshBranches runs on a worker goroutine and re-renders the commits view
directly to refresh the branch-head visualization. As with refreshView, this
currently only flushes because HandleRender ends with self.c.Render(). Wrap the
explicit HandleRender call (along with the LocalCommitsMutex pair around it) in
OnUIThread so it keeps working once Render() is removed.
An async refresh dispatches refreshXyz on a worker goroutine, which then calls
refreshView -> PostRefreshUpdate -> HandleRender. Today the final
self.c.Render() inside ListContextTrait.HandleRender is what triggers a UI flush
from the worker. We're going to remove that Render() call, so prepare by
wrapping refreshView's body in OnUIThread.
This moves the entire rendering of the view (and the ReApplyFilter/ReApplySearch
stuff) to the UI thread, not just the layout. I don't expect this to make a
difference in practice, and it is already one step towards my long-term goal of
moving all view rendering to the UI thread (see
https://github.com/jesseduffield/lazygit/issues/2974#issuecomment-1729154768).
Unrelated to this branch, just because we're touching this code: there's little
reason to set the color on the background thread but the text on the UI thread.
Set them both together on the UI thread. Avoids a data race (unlikely to be a
problem in practice, we're talking about a 64-bit int, but still).
In 0d195077e4 we improved the performance of the status bar spinner by
avoiding a layout. This is fine from one spinner tick to the next, but it's a
problem when spinning starts or ends (or in the hypothetical case that the
status text changes in the middle of the operation, which we never do in
lazygit, but theoretically could). In this case a layout is needed so that the
rest of the status bar gets pushed over appropriately (or moves back to the left
when the spinner ends), and also so that the bottom line is shown or hidden
properly for users who set gui.showBottomLine to false.
To fix this, keep track of the status string width and force a layout whenever
it changes. This includes the beginning and end of an operation when it changes
from empty to non-empty or vice versa.
There is currently no observable misbehavior from this bug, but that's only
because we must have a HandleRender call somewhere that forces a full layout
when an operation starts or ends. We will remove the Render() call from
HandleRender at the end of this branch, at which point the misbehavior would be
visible if we didn't fix it here.
This prevents views from drawing over higher z-order views.
Currently this is not an issue in practice, because we use
ForceFlushViewsContentOnly only for the bottom line status spinner, and there
are never views on top of it. However, later in the branch we will use the
mechanism to redraw the inline spinners in panels (e.g. the "Pushing..." status
next to a branch name), and there could be a popup on top of it.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
With a very slow spinner rate (seconds), you can see that at the beginning of an
operation the bottom line leaves a gap for where the status will go, but the
status (and spinner) is only drawn the first time the spinner ticks. The reason
is that layout looks at GetStatusString to decide how much room to leave, rather
than at the actual content of the AppStatus view; the view content is only set
by renderAppStatus the first time the spinner ticks.
Fix this by making layout look at the actual content of the view so that the
layout is in sync with what is drawn. This also avoids flicker if an operation
is so fast that it finishes before the spinner ticks for the first time,
especially for users who set gui.showBottomLine to false.
### PR Description
This fixes#4734, where lazygit would use a lot of CPU when the spinner
was shown due to redrawing the entire screen every time the spinner
needed a redraw.
The change adds the ability to request a UI redraw without invalidating
the full UI, thus only redrawing the spinner, re-routing the spinner to
this new flow.
CPU usage on a chromebook went from 60% to 5% when the spinner is shown.
Changing the refresh rate of the spinner from 50ms to 200ms brings it
down from 5% to 1% if ever we would like to change the default,
personally I prefer the slower moving spinner, but that's subjective.
This didn't cause a bug so far because switching repos always happens from
within an OnWaitingStatus, so the spinner would take care of calling layout and
draw. However, later in this branch we are going to optimize the spinner so that
it no longer calls layout, at which point this would break, so make sure we
rerender at the point where it's needed.
Our most recent change to the script (58309b02a9) broke it because the
anchored regex's no longer match the beginning of the subject. Fix this
by omitting the hash, which is a bit unfortunate but probably acceptable
(I rarely look at the output of the script anyway).
Our most recent change to the script (58309b02a9) broke it because the
anchored regex's no longer match the beginning of the subject. Fix this by
omitting the hash, which is a bit unfortunate but probably acceptable (I rarely
look at the output of the script anyway).
Modifiers were moved into Key in 22169e22f, but the separate Modifier field
on types.Binding and gocui.keybinding was left behind. The keypress matcher
already compares modifiers via Key.Equals, so the old field is never read on
the dispatch path; it just got passed through SetKeybinding and stored.
Drop it from gocui.keybinding, types.Binding, and the SetKeybinding /
DeleteKeybinding signatures, and remove every now-redundant Modifier:
gocui.ModNone struct field. Mouse bindings keep their own Modifier (on
ViewMouseBinding) since that path still consults it.
I noticed that it compares key.keyName and key.str separately instead of calling
key.Equals, but instead of deciding whether that's a problem, just delete the
function when nobody needs it.
While I strongly prefer the alt-arrow bindings myself, I'm worried that
existing users might not be happy about the change, so I'm reverting it.
I'm working on supporting multiple keybindings for every command, so
once that's in, we can change the default to include both.
While I strongly prefer the alt-arrow bindings myself, I'm worried that existing
users might not be happy about the change, so I'm reverting it.
I'm working on supporting multiple keybindings for every command, so once that's
in, we can change the default to include both.
In the Remotes panel, when selecting a remote that has push URLs, show
them in the main view in addition to the fetch URL(s).
Addresses half of #5566 (just the showing part, not the editing).
The commit graph used '⏣' (U+23E3 BENZENE RING WITH CIRCLE) for merge
commits and '◯' (U+25EF LARGE CIRCLE) for regular commits. Both have
very poor coverage in popular monospace fonts:
- '⏣' lives in the Misc Technical block and is essentially absent from
every common monospace font (Source Code Pro, JetBrains Mono, Fira Code,
Cascadia Code, Hack, Iosevka, Menlo, Consolas, Monaco, IBM Plex Mono,
Ubuntu Mono, Noto Sans Mono, Inconsolata). It is always drawn from a
system fallback font.
- '◯' is the late-addition LARGE CIRCLE codepoint. It is present in some
fonts (Cascadia, Fira Code, Hack, Iosevka, Menlo, Noto Sans Mono) but
missing from many others, including Source Code Pro and most Nerd Font
derivatives based on it.
This is why the graph renders inconsistently across platforms even when
the same monospace font is configured: each OS picks a different
fallback font (Apple Symbols on macOS, Segoe UI Symbol on Windows,
Noto/DejaVu/Symbola on Linux), and the substituted glyphs differ in
shape, weight, and advance width. '◯' is also East Asian Ambiguous
width, so some terminals render it wider than one cell, exaggerating the
misalignment.
Replace the symbols with codepoints from the foundational 1991 Geometric
Shapes block, which has far broader font coverage:
- Merge: '◎' U+25CE BULLSEYE -- concentric circles, the visually closest
cousin to the previous benzene-ring glyph.
- Commit: '○' U+25CB WHITE CIRCLE -- the same hollow-circle silhouette
as before, just a more universally available codepoint.
The new symbols are present in the font directly in significantly more
cases; and when fallback is still required, they are universally
well-drawn (unlike '⏣', which many fallback fonts also lack).
I also considered choosing suitable nerd font symbols for those who are
using nerd fonts, on the assumption that these must work better because
they are guaranteed to be in the font and no fallback font substitution
is necessary; several suitable icons could be considered, e.g.
`nf-cod-circle_large` or `nf-md-circle_double`. Surprisingly, these
didn't work well, and the reason is that (at least in the font I am
using) these are defined with a glyph width that is wider than their
advance width, which means they draw in different sizes depending on
whether they are followed by a space or not. The glyphs we picked above
don't have this problem.
And finally, I considered adding config options so that users with weird
fonts can pick symbols that work well for them. I would like to avoid
having to do this though; ideally we should be able to make a choice
that works well for everybody.
The commit graph used '⏣' (U+23E3 BENZENE RING WITH CIRCLE) for merge
commits and '◯' (U+25EF LARGE CIRCLE) for regular commits. Both have
very poor coverage in popular monospace fonts:
- '⏣' lives in the Misc Technical block and is essentially absent from
every common monospace font (Source Code Pro, JetBrains Mono, Fira
Code, Cascadia Code, Hack, Iosevka, Menlo, Consolas, Monaco, IBM
Plex Mono, Ubuntu Mono, Noto Sans Mono, Inconsolata). It is always
drawn from a system fallback font.
- '◯' is the late-addition LARGE CIRCLE codepoint. It is present in
some fonts (Cascadia, Fira Code, Hack, Iosevka, Menlo, Noto Sans
Mono) but missing from many others, including Source Code Pro and
most Nerd Font derivatives based on it.
This is why the graph renders inconsistently across platforms even
when the same monospace font is configured: each OS picks a different
fallback font (Apple Symbols on macOS, Segoe UI Symbol on Windows,
Noto/DejaVu/Symbola on Linux), and the substituted glyphs differ in
shape, weight, and advance width. '◯' is also East Asian Ambiguous
width, so some terminals render it wider than one cell, exaggerating
the misalignment.
Replace the symbols with codepoints from the foundational 1991
Geometric Shapes block, which has far broader font coverage:
- Merge: '◎' U+25CE BULLSEYE -- concentric circles, the visually
closest cousin to the previous benzene-ring glyph.
- Commit: '○' U+25CB WHITE CIRCLE -- the same hollow-circle silhouette
as before, just a more universally available codepoint.
The new symbols are present in the font directly in significantly
more cases; and when fallback is still required, they are universally
well-drawn (unlike '⏣', which many fallback fonts also lack).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Windows cannot remove files while handles are still open. In
TestOSCommandFileType we created files and immediately called RemoveAll without
closing handles, which left untracked artifacts (e.g. "testFile" and "file with
spaces") in the working tree. Close the handles and assert RemoveAll succeeds so
cleanup failures are visible.
The call was meant to guarantee a UTC time zone to make the tests deterministic,
but as the previous commit explained, this only worked on Mac and Linux, not on
Windows. Since we now have a better fix, this workaround is no longer needed.
The "custom time format" test case of TestGetCommitListDisplayStrings failed on
Windows. Root cause: UnixToDateSmart used time.Unix(timestamp, 0), which formats
in process-local time. In tests we pass an explicit 'now' (often UTC), but the
timestamp was rendered in Local, causing one-hour drift on non-UTC machines.
The test tried to work around this by doing os.Setenv("TZ", "UTC"); however,
this only worked on Mac and Linux. On Windows, it has no effect because Windows
uses registry-based timezone configuration, not TZ environment variables.
Change: convert the timestamp into now.Location() before both the same-day
comparison and formatting.
Why this is safe: callers already define the presentation timezone via the 'now'
argument (typically time.Now() in app code, controlled time in tests). This
aligns timestamp rendering with that caller intent and removes dependence on
global TZ state or OS-specific environment variable behavior.
Added regression tests for UTC and UTC+1 to ensure deterministic behavior across
all platforms.
In the event that LC_ALL was set, for example, the tests would fail as
it takes precedence over LANG.
Tiny change that prevents language tests from failing if LC_ALL is set
(I also added LC_MESSAGES but I am not sure if that's also needed, from
what I read it also takes precedence) so I did not open an issue prior,
hopefully that's ok!
These have alternate keys (`<ctrl+h>` for backspace, and `<ctrl+f>` for
move-cursor-right). Both of these broke with commit 22169e22ffc46c5; the
first because it was accidentally omitted, the second because of a
stupid copy/paste mistake.
These have alternate keys (<ctrl+h> for backspace, and <ctrl+f> for
move-cursor-right). Both of these broke with commit 22169e22ffc46c5; the first
because it was accidentally omitted, the second because of a stupid copy/paste
mistake.
In #5563 we started to support an alternative syntax for keybindings:
instead of `<c-a>` you could say `<ctrl+a>`, which is easier to read
especially when there are multiple modifiers (`<ctrl+shift+x>` instead
of `<c-s-x>`). In this PR we make this new syntax the default.
Make the edit keybindings for "move-by-word" and "backspace-word"
platform-dependent so that they are with ctrl on Windows and Linux, but
alt on Mac. These are the common conventions on these platforms. Also,
make them configurable so that user who can't get used to the change can
map it back to what they were.
Add a "forward-delete-word" keybinding, bound to alt-delete on Mac, and
ctrl-delete on Windows and Linux.
Revamp lazygit's keybinding mechanism to support richer keybindings for
those terminals that support the newer keyboard protocols. This makes it
possible to use keybindings such as `ctrl-alt-shift-x`.
Change the default keybindings for moving commits up and down from
`ctrl-k`/`ctrl-j` to `alt-up`/`alt-down`; this is mostly for personal
preference, I find them easier to remember, and they are nicely similar
to moving a line of code up and down in many code editors. Also, change
the default binding for submitting a commit from the commit description
editor from `alt-enter` to `command-enter` on Mac, or `ctrl-enter` on
Linux and Windows; these are the same bindings that are used in many
multi-line edit field situations, e.g. in GitHub comments.
See docs/keybindings/Custom_Keybindings.md for caveats about terminal
compatibility.
The previous version only enumerated the supported (non-rune) bindings.
Replace it with a description of the syntax: how to spell single-rune
keys, special keys, and modified keys; how to combine modifiers; the
keyword forms for `<space>`, `<minus>`, `<plus>`; and which combinations
are rejected because terminals can't deliver them.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
This changes not only how we store modifiers (inside of Key instead of passing
it separately), but also how we parse keybinding strings: it supports all
combinations of modifiers now (if the terminal supports it, that is).
An uppercase letter is not valid with ctrl, and only works because we lowercase
the string before parsing it. This will change later in this branch when we
start supporting bindings like <c-s-r>.
Refactor code to introduce a Key type in gocui that bundles the keyName
and a rune, so that we don't have to pass these around separately
everywhere.
This, and updating tcell to v3 lays the ground for supporting more
keybindings in terminals that support the CSIu keyboard protocol.
This bundles the keyName and a rune, so that we don't have to pass these around
separately everywhere. This should make it easier to swap out the rune for a
string when we upgrade to tcell v3.
Over the past few months or even years, [Jesse's gocui
fork](https://github.com/jesseduffield/gocui) has become more and more
tied to lazygit; I have repeatedly made API-breaking changes to it
without caring much about what this means for other clients like
lazydocker or lazynpm (and Jesse was ok with that).
Given that situation, it no longer makes much sense to maintain it in a
standalone repo, so copy it into lazygit; this will greatly reduce the
friction of making changes to it. If/when the time comes to update those
other clients to also benefit from the improvements we make here, we can
always copy the files back to the gocui fork and resume it there.
I copied all files except dot files (.github and .gitignore), the _examples
folder, and go.mod/go.sum.
At some point we may want to copy the files back to the gocui repo when other
clients (e.g. lazydocker) want to use the newer versions of them.
### PR Description
Instead of manually figuring out how much ahead each branch is from it's
upstream branch, use [for-each-ref
ahead-behind](https://git-scm.com/docs/git-for-each-ref/2.41.0#Documentation/git-for-each-ref.txt-ahead-behindcommittish)
if supported by the git binary.
On my Windows machine, using the lazygit repo with all 61 branches
created locally, it goes from ~8.5s to ~200ms.
It was also able to find a base branch for `assets` which the previous
iteration did not.
Fixes#5532
This is so that they look the same no matter what color palette the
terminal is using. (One user complained that the text for the Open state
is barely readable, because they are using a palette that has a very
pale green.)
GitHub uses slightly different colors depending on light vs. dark mode;
fortunately they are very close, so hopefully we can ignore this. I
picked the ones for dark mode here, on the assumption that this is more
common.
Also, not all terminals support true hex colors; for example,
Terminal.app on macOS doesn't, so it maps the colors to the closest ones
in the Xterm-256 palette. This shouldn't be a huge problem, but for some
reason it displays draft PRs as something closer to Cyan than grey, and
I don't understand why.
This is so that they look the same no matter what color palette the terminal is
using. (One user complained that the text for the Open state is barely readable,
because they are using a palette that has a very pale green.)
GitHub uses slightly different colors depending on light vs. dark mode;
fortunately they are very close, so hopefully we can ignore this. I picked the
ones for dark mode here, on the assumption that this is more common.
Also, not all terminals support true hex colors; for example, Terminal.app on
macOS doesn't, so it maps the colors to the closest ones in the Xterm-256
palette. This shouldn't be a huge problem, but for some reason it displays draft
PRs as something closer to Cyan than grey, and I don't understand why.
If the repo has multiple remotes, but only one of them is on Github (the
others might for example point to a self-hosted Critic server or
something like that), lazygit would still present a menu to choose the
remote for pull requests, but it would contain only that single entry.
That's pointless, pick it automatically without prompting.
If the repo has multiple remotes, but only one of them is on Github (the others
might for example point to a self-hosted Critic server or something like that),
lazygit would still present a menu to choose the remote for pull requests, but
it would contain only that single entry. That's pointless, pick it automatically
without prompting.
We add some tests while we're at it; these wouldn't have caught the problem,
because they only test getGithubBaseRemote which already takes the filtered
github remotes. It's still better than not having any tests; the real issue
could only have been caught with an integration test, which we don't bother
adding.
If we used to have a base remote (e.g. because there was only one), but
now we don't (e.g. because the user has added a second one, and we don't
know yet which one is the base), stop showing the cached PRs. This is
especially important in the case that the user cancels the prompt, in
which case we don't have a base remote for the rest of the session, but
would keep showing the (potentially stale) cached PRs forever.
You might ask why we don't retain the previous base remote in the case
that we used to have one but no longer do; this may be possible, but
it's error-prone because the user might have shuffled their remotes
around and changed their names. I don't think it's worth the risk.
If we used to have a base remote (e.g. because there was only one), but now we
don't (e.g. because the user has added a second one, and we don't know yet which
one is the base), stop showing the cached PRs. This is especially important in
the case that the user cancels the prompt, in which case we don't have a base
remote for the rest of the session, but would keep showing the (potentially
stale) cached PRs forever.
This is useful when cancelling out of the commit panel mid-sentence
(after having typed the space for the next word); when entering the
commit message panel again, the space was gone and you had to type it
again. Small thing, but it just seems better to resume the panel in
exactly the state that you left it in. (Which we actually don't do; we
don't remember the cursor position, or which of the subject/description
panels was active. That would be a separate improvement.)
Fixes#5519.
This is useful when cancelling out of the commit panel mid-sentence (after
having typed the space for the next word); when entering the commit message
panel again, the space was gone and you had to type it again. Small thing, but
it just seems better to resume the panel in exactly the state that you left it
in. (Which we actually don't do; we don't remember the cursor position, or which
of the subject/description panels was active. That would be a separate
improvement.)
The save path and the load path used to be asymmetric. On save, the textarea
getters applied strings.TrimSpace, which stripped any leading blank lines, a
trailing newline after the cursor, or indentation on the very first line of the
description — all of which are legitimate user content. On load,
SplitCommitMessageAndDescription did TrimSpace on the description as well, and
the preserved message was routed through that same git-format split because
HandleCommitPress passed it as OpenCommitMessagePanel's InitialMessage. The
result: every round-trip through "escape and reopen" silently mutated the
message.
The fix is to treat our own preservation file as its own format, distinct from
git's canonical "summary\n\nbody" format:
- The textarea getters return raw content. strings.TrimSpace moves to the one
place that still needs it: the empty-summary check in HandleCommitConfirm (git
itself strips trailing whitespace and blank lines, so no pre-trim is needed
before -m).
- SplitPreservedCommitMessage / SetPreservedMessageInView split on the single
"\n" our Join uses, without any trimming — truly lossless.
- SplitCommitMessageAndDescription keeps its git-format behavior but replaces
TrimSpace with TrimPrefix("\n"), so it strips only the blank-line separator
and leaves body indentation intact.
- HandleCommitPress now mirrors HandleWIPCommitPress: it no longer passes the
preserved message as InitialMessage. OpenCommitMessagePanel resolves the
preserved content itself, uses it for display via the preservation-format
setter, and stores it as the initial message so the close-time "did the user
change anything?" check still correctly detects a cleared panel.
- GetInitialMessage no longer trims. With raw getters on both sides of the
comparison, trimming here caused spurious non-matches (e.g. for preserved
content with trailing whitespace). The original motivation — matching a
"WIP: " prefix with trailing space — works unchanged.
- UpdateCommitPanelView becomes dead code and is removed; its one remaining
caller (history cycling, always git-format) goes directly through
SetMessageAndDescriptionInView.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Callers currently hand this function a trimmed description, so the output is
always clean. An upcoming change to the commit-panel getters will stop trimming
at the callsite (so that whitespace typed by the user round-trips through the
preservation file exactly), at which point the description can end with one or
more newlines. Without this change, a user who presses Enter after their
description body and then invokes "Add co-author" would end up with two blank
lines between the body and the trailer instead of the expected one.
Git's --grep option uses Basic Regular Expression syntax by default, which means
that the `[^\n]*` didn't do what was intended; it means "any character except
`\` or the literal letter `n`" — not "any character except newline."
Besides, `^` matched any line start, not only the start of the entire message,
so "any character except newline" would have been wrong anyway. Given this, the
script matched commits that have WIP or DROPME in the body, which is not what we
want. (The last commit of this branch is an example for that.)
Fix this by listing only the subject lines and grepping them outside of git;
this also lets us use a slightly simpler regex (we want to match WIP anywhere in
the subject).
This isn't possible with the default quit binding ('q'), but there's an
alternative binding (ctrl-c) that does work while the panel is open;
also, users can rebind quit to something like ctrl-q.
Fixes#5513.
This isn't possible with the default quit binding ('q'), but there's an
alternative binding (ctrl-c) that does work while the panel is open; also, users
can rebind quit to something like ctrl-q.
We'll want to call just the preservation step when the app is quitting
with the commit message panel open: at that point the view-hiding and
context-popping in CloseCommitMessagePanel are pointless (the app is
about to exit), and some of the focus-lost side effects could be
surprising during teardown.
There's no reason for this; when opening the panel next time, it will be
populated again. Also, it doesn't make sense to do this only when not preserving
the message.
Related to #5124
## Changes
- Extended existing retry logic to handle transient ref lock errors
- Added retry for "cannot lock ref" and "cannot update ref" error
messages
- Extracted retryable error check into helper function for clarity
These errors can occur intermittently during fetch/pull operations on
large repositories and typically succeed on retry.
Extends the existing retry logic to handle transient lock-related errors beyond just .git/index.lock. This now also retries when encountering "cannot lock ref" or "cannot update ref" errors, which can occur intermittently during fetch/pull operations in large repositories.
Related to #5124
Signed-off-by: majiayu000 <1835304752@qq.com>
Change the tests so that they run in a linked worktree; this uncovers the bug
that copying a file's absolute path uses the main repo path rather than the
worktree's path.
When no base repository is configured using gh, we have several
heuristics for choosing a likely base repo before prompting the user.
One of these was that if the origin remote exists, we'd choose that.
This may be the right choice in some cases, but in many others it's not;
for example, in the common scenario of a forking setup where the
upstream repo's remote is called after its owner, and the fork remote is
called origin, we would choose origin as the base repo, which results in
not showing any PRs. Don't do that, and instead prompt the user for the
base repo in this case.
When no base repository is configured using gh, we have several heuristics for
choosing a likely base repo before prompting the user. One of these was that if
the origin remote exists, we'd choose that. This may be the right choice in some
cases, but in many others it's not; for example, in the common scenario of a
forking setup where the upstream repo's remote is called after its owner, and
the fork remote is called origin, we would choose origin as the base repo, which
results in not showing any PRs. Don't do that, and instead prompt the user for
the base repo in this case.
The assumption is that if a pull request exists on a main branch, it was
usually created by mistake and then closed, and showing it serves no
purpose and is only distracting.
We keep showing _open_ pull requests for main branches though, because
this allows you to notice that there is one that you probably want to
close.
This only affects the display (in the branches list and in the main
view); opening the PR in the browser using shift-G is still possible, as
is copying its URL to the clipboard.
The assumption is that if a pull request exists on a main branch, it was usually
created by mistake and then closed, and showing it serves no purpose and is only
distracting.
We keep showing open pull requests for main branches though, because this allows
you to notice that there is one that you probably want to close.
This only affects the display (in the branches list and in the main view);
opening the PR in the browser using shift-G is still possible, as is copying its
URL to the clipboard.
### PR Description
Close#5494
Normalizes the repository owner to lowercase during the PR mapping.
This ensures that PR icons and integration features work correctly even
when the local git remote URL casing differs from the official
repository casing on GitHub.
Normalizes the repository owner to lowercase during the PR
mapping.
This ensures that PR icons and integration features work correctly even
when the local git remote URL casing differs from the official
repository casing on GitHub.
Just (https://just.systems/) works better than make for running
commands. For example, passing arguments to `make integration-test-cli`
requires a `--` between make's arguments and the cli test runner's
arguments (e.g. -sandbox), and will also result in weird errors. Just
doesn't have any of these problems.
I chose different target names than we use in the Makefile; the goal is
to have better tab completion, where the most commonly used commands can
be completed after typing a single letter. That's why I use "e2e" for
integration tests, which is not a term we use anywhere else.
Keeping the Makefile around for those who are used to it, and are too
lazy to install just.
Just (https://just.systems/) works better than make for running commands. For
example, passing arguments to `make integration-test-cli` requires a `--`
between make's arguments and the cli test runner's arguments (e.g. -sandbox),
and will also result in weird errors. Just doesn't have any of these problems.
I chose different target names than we use in the Makefile; the goal is to have
better tab completion, where the most commonly used commands can be completed
after typing a single letter. That's why I use "e2e" for integration tests,
which is not a term we use anywhere else.
Keeping the Makefile around for those who are used to it, and are too lazy to
install just.
## Summary
Fix high severity security issue in `.github/workflows/release.yml`.
## Vulnerability
| Field | Value |
|-------|-------|
| **ID** |
yaml.github-actions.security.run-shell-injection.run-shell-injection |
| **Severity** | HIGH |
| **Scanner** | semgrep |
| **Rule** |
`yaml.github-actions.security.run-shell-injection.run-shell-injection` |
| **File** | `.github/workflows/release.yml:113` |
**Description**: Using variable interpolation `${{...}}` with `github`
context data in a `run:` step could allow an attacker to inject their
own code into the runner. This would allow them to steal secrets and
code. `github` context data can have arbitrary user input and should be
treated as untrusted. Instead, use an intermediate environment variable
with `env:` to store the data and use the environment variable in the
`run:` script. Be sure to use double-quotes the environment variable,
like this: "$ENVVAR".
## Changes
- `.github/workflows/release.yml`
## Verification
- [x] Build passes
- [x] Scanner re-scan confirms fix
- [x] LLM code review passed
---
*Automated security fix by [OrbisAI Security](https://orbisappsec.com)*
When building multi-step custom command forms, some prompts are only
relevant depending on earlier answers. Without conditional logic, users
must dismiss irrelevant prompts manually.
Prompts now accept a `condition` field with a template expression
evaluated against prior form values. Skipped prompts default to an empty
string.
When building multi-step custom command forms, some prompts are only
relevant depending on earlier answers. Without conditional logic,
users must dismiss irrelevant prompts manually.
Prompts now accept a `condition` field with a template expression
evaluated against prior form values. Skipped prompts default to
an empty string.
The template expression is a string pre- and suffixed with double curly
braces - {{}}.
Form keys can be reused, a guard ensures that skipped prompts do not
reset already set form keys with an empty string. This allows the
conditional flow to remind a user to set a key that was left empty
because additional conditions want that key to be set. This removes the
need to have additional if checks in the command that uses the form
keys.
This makes it easier to recover them if they were deleted accidentally.
We only do this for local branches for now, we don't bother for remote
branches; it would be trickier there, because the branch on the server
might not actually point to the same hash as our local remote tracking
branch does.
Fixes#2468.
This makes it easier to recover them if they were deleted accidentally.
We only do this for local branches for now, we don't bother for remote branches;
it would be trickier there, because the branch on the server might not actually
point to the same hash as our local remote tracking branch does.
Bumps [github.com/spkg/bom](https://github.com/spkg/bom) from
0.0.0-20160624110644-59b7046e48ad to 1.0.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/spkg/bom/releases">github.com/spkg/bom's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.1</h2>
<p>Update to later version of go, remove CI that no longer works</p>
<h2>v1.0.0</h2>
<p>Add support for Go modules.</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/spkg/bom/commits/v1.0.1">compare view</a></li>
</ul>
</details>
<br />
Bumps [github.com/adrg/xdg](https://github.com/adrg/xdg) from 0.4.0 to
0.5.3.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/adrg/xdg/releases">github.com/adrg/xdg's
releases</a>.</em></p>
<blockquote>
<h2>v0.5.3</h2>
<h3>Changelog</h3>
<ul>
<li>Updated <code>xdg.SearchRuntimeFile</code> to also look in the
operating system's temporary directory for runtime files.
This covers unlikely cases in which runtime files cannot be written
relative to the base runtime directory either because it does not exist
or it is not accessible, so <code>xdg.RuntimeFile</code> suggests the
operating system's temporary directory as a suitable fallback
location.</li>
</ul>
<h3>Internal</h3>
<ul>
<li>Improved package testing.</li>
</ul>
<h2>v0.5.2</h2>
<h3>Changelog</h3>
<ul>
<li>
<p>Updated logic of <code>xdg.RuntimeFile</code>: due to the special
nature of the <code>runtime directory</code>, the function no longer
attempts to create it if it does not exist. If that's the case, the
function uses the operating system's <code>temporary directory</code> as
a fallback. The function still creates subdirectories relative to the
base runtime directory or its fallback.</p>
<p>Justification: the creation of the runtime directory is not in the
scope of this package as it has special requirements defined by the <a
href="https://specifications.freedesktop.org/basedir-spec/latest">XDG
Base Directory Specification</a>. Relevant excerpt:</p>
<blockquote>
<p>The lifetime of the directory MUST be bound to the user being logged
in. It MUST be created when the user first logs in and if the user fully
logs out the directory MUST be removed. If the user logs in more than
once they should get pointed to the same directory, and it is mandatory
that the directory continues to exist from their first login to their
last logout on the system, and not removed in between. Files in the
directory MUST not survive reboot or a full logout/login cycle.</p>
</blockquote>
<p>Also, on <code>Linux</code>, the parent directories of the default
user runtime directory are owned by the root user so they cannot be
created by a regular user. <a
href="https://www.freedesktop.org/software/systemd/man/latest/pam_systemd.html">pam_systemd</a>
is usually responsible for creating the runtime directory
(<code>/run/user/$UID</code>).</p>
</li>
</ul>
<h2>v0.5.1</h2>
<h3>Changelog</h3>
<ul>
<li>Added support for the non-standard <code>XDG_BIN_HOME</code> base
directory.
See <a
href="https://github.com/adrg/xdg?tab=readme-ov-file#xdg-base-directory">XDG
base directories</a> README section for more details.</li>
<li>Added more config and data search locations on <code>macOS</code>.
<ul>
<li>Added <code>~/.config</code> at the end of the list of default
locations for <code>XDG_CONFIG_DIRS</code>.</li>
<li>Added <code>~/.local/share</code> at the end of the list of default
locations for <code>XDG_DATA_DIRS</code>.</li>
</ul>
</li>
<li>Added more application search locations on <code>Windows</code>:
<ul>
<li><code>%ProgramFiles%</code></li>
<li><code>%ProgramFiles%\Common Files</code></li>
<li><code>%LOCALAPPDATA%\Programs</code></li>
<li><code>%LOCALAPPDATA%\Programs\Common</code></li>
</ul>
</li>
</ul>
<h3>Internal</h3>
<ul>
<li>Updated <code>golang.org/x/sys</code> dependency to the latest
version.</li>
<li>Improved package testing.</li>
</ul>
<h2>v0.5.0</h2>
<h3>Changelog</h3>
<ul>
<li><code>user-dirs.dirs</code> config file is now parsed on Unix-like
operating systems (except for macOS and Plan 9).
See <a
href="https://github.com/adrg/xdg?tab=readme-ov-file#xdg-user-directories">XDG
user directories</a> README section for more details.</li>
<li>Updated <code>golang.org/x/sys</code> dependency to the latest
version.</li>
</ul>
<h4>Internal</h4>
<ul>
<li>Moved all path related functionality in internal
<code>pathutil</code> package.</li>
<li>Added internal <code>userdirs</code> package:
<ul>
<li>Moved <code>xdg.UserDirectories</code> to
<code>userdirs.Directories</code>.</li>
<li>Added parsing functions for <code>user-dirs.dirs</code> config
file.</li>
</ul>
</li>
<li>Improved package testing.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/adrg/xdg/commit/aa865a51a1b35fd06925fd6b8604991e79e3167e"><code>aa865a5</code></a>
Merge pull request <a
href="https://redirect.github.com/adrg/xdg/issues/101">#101</a> from
adrg/update-search-runtime-file</li>
<li><a
href="https://github.com/adrg/xdg/commit/71a81eccf3e9ac9ebf03e8c11ca3ed60a06eac7f"><code>71a81ec</code></a>
Minor xdg.SearchRuntimeFile function documentation update</li>
<li><a
href="https://github.com/adrg/xdg/commit/88111eba52ac2a211b97194266db5207c975c266"><code>88111eb</code></a>
Minor example update in README.md and doc.go</li>
<li><a
href="https://github.com/adrg/xdg/commit/d9f76be86d944bf2b9bdb8544952111e2533f3ad"><code>d9f76be</code></a>
Improve non-existent runtime directory test case</li>
<li><a
href="https://github.com/adrg/xdg/commit/800775a49c0a7877af5dca22104b90dc7e788cd0"><code>800775a</code></a>
Update xdg.SearchRuntimeFile to also look in temporary directory</li>
<li><a
href="https://github.com/adrg/xdg/commit/2335a687b19a49dafb193856d64d911d33c4b3c1"><code>2335a68</code></a>
Merge pull request <a
href="https://redirect.github.com/adrg/xdg/issues/99">#99</a> from
adrg/improve-runtime-file</li>
<li><a
href="https://github.com/adrg/xdg/commit/221e50698e5b31d277289e971f645299279efdd5"><code>221e506</code></a>
Minor non-existent runtime directory test case fix on macOS</li>
<li><a
href="https://github.com/adrg/xdg/commit/9bbb6024b2e9ee213bbed1f63ae8ea6063767d5b"><code>9bbb602</code></a>
Minor error format improvement in pathutil.Create and
pathutil.Search</li>
<li><a
href="https://github.com/adrg/xdg/commit/987b3ce5c440036b799a21a633a699be91530d0a"><code>987b3ce</code></a>
Minor README.md update</li>
<li><a
href="https://github.com/adrg/xdg/commit/3c39d559725cf005c392630100f4f338b49daf24"><code>3c39d55</code></a>
Add non-existent runtime directory test case</li>
<li>Additional commits viewable in <a
href="https://github.com/adrg/xdg/compare/v0.4.0...v0.5.3">compare
view</a></li>
</ul>
</details>
<br />
- **PR Description**
If the user has `gh` installed and is logged in (`gh auth login`),
lazygit shows GitHub PR icons next to the names of branches that have an
associated PR, colored by the PR's status (green=open, red=closed,
purple=merged).
Selecting a branch and pressing `shift-G` opens the PR in the browser.
For esthetic reasons, checking out a branch (or other ref) blocks the UI until
the refresh is done, so it's important that the refresh doesn't do unnecessary
work. Refreshing pull requests is unnecessary (but costly, when waiting for it)
when a branch is checked out that already existed locally. However, it is
required when checking out a remote branch for the first time, so that the PR
icon appears immediately when there is one.
For the branches panel we might consider unifying it with the existing `o`
command for creating a PR: it could check if there is a PR already, and open it
if so, or create a new one if not.
However, I also want the command in the local commits panel for the checked out
branch, and there's no existing "Create PR" command there; and the `o` command
opens the selected commit in the browser, so it's unrelated.
Add GitHubCommands struct with GraphQL-based PR fetching, and
GithubPullRequest model. Wire HostingService and GitHub command
structs into GitCommand.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
Extract parseRemoteUrl helper to avoid duplication between
getRepoURLFromRemoteURL and new getRepoNameFromRemoteURL.
Add repoNameTemplate to ServiceDefinition and GetRepoName() to
HostingServiceMgr. Add GetRepoInfoFromURL for callers that need
owner/repo without a full service lookup.
The only information that this carries is whether an entry is a real branch or a
detached head. Detached heads can only be at the top, and they are easy to tell
apart from the other branches by their name, so the icon is not really very
useful.
We are going to show PR icons in this column.
Not a terribly important feature for users, probably, but it is useful for
developers when testing a new feature with or without nerd fonts; and it does go
against or policy of all configs being hot-reloadable.
Note that switching from nerd fonts version 2 to 3 is *not* supported without
restarting, but I find this less important.
This isn't a valid key, and according to claude it's not possible to configure
it to get only security updates (I'm too lazy to read the docs). I suppose this
means we will now get pull requests for any updated dependencies, but maybe
that's useful; we'll see how annoying this gets.
Re-submission of #5422. Had a problem with my fork and had to delete it,
which closed the original PR. Apologies for the noise.
## Summary
This PR pins all GitHub Actions to immutable commit SHAs and extracts an
inline secret from a `run:` block into an `env:` mapping.
- Pin 7 unpinned actions to full 40-character SHAs
- Extract 1 inline secret from run block to env var
## How to verify
Review the diff, each change is mechanical and preserves workflow
behavior:
- **SHA pinning**: `action@v3` becomes `action@abc123 # v3`, original
version preserved as comment
- **Secret extraction**: `${{ secrets.* }}` in `run:` moves to `env:`
block, referenced as `"${ENV_VAR}"` in the script
- No workflow logic, triggers, or permissions are modified
I've been researching CI/CD supply chain attack vectors and submitting
fixes to affected repos. Based on that research I built a scanner called
Runner Guard and open sourced it
[here](https://github.com/Vigilant-LLC/runner-guard) so you can scan
yourself if you want to. I'll be posting more advisories over the next
few weeks [on Twitter](https://x.com/vigilance_one) if you want to stay
in the loop.
If you have any questions, reach out. I'll be monitoring comms.
\- Chris (dagecko)
### PR Description
It actually expect `branch.<name>.*`
`man git-config | rg "\s+branch\.\S+\$"` to show all possible keys.
```
panic: runtime error: slice bounds out of range [7:6]
goroutine 57 [running]:
github.com/jesseduffield/lazygit/pkg/commands/git_commands.(*ConfigCommands).Branches(0x110187428260, {0x15495d0, 0x110187190230})
lazygit/pkg/commands/git_commands/config.go:104 +0x8ef
github.com/jesseduffield/lazygit/pkg/commands/git_commands.(*BranchLoader).Load(0x1101873e6180, {0x1d77440, 0x0, 0x0}, 0x1101873e86e0, {0x0, 0x0, 0x0}, 0x1, 0x1101872a5e60,
...)
lazygit/pkg/commands/git_commands/branch_loader.go:121 +0x7cc
github.com/jesseduffield/lazygit/pkg/gui/controllers/helpers.(*RefreshHelper).refreshBranches(0x1101871ef1c0, 0x1, 0x0, 0x1)
lazygit/pkg/gui/controllers/helpers/refresh_helper.go:456 +0x328
github.com/jesseduffield/lazygit/pkg/gui/controllers/helpers.(*RefreshHelper).Refresh.func2.3()
lazygit/pkg/gui/controllers/helpers/refresh_helper.go:131 +0x45
github.com/jesseduffield/lazygit/pkg/gui/controllers/helpers.(*RefreshHelper).Refresh.func2.1.1({0x154b438, 0x110187b12260})
lazygit/pkg/gui/controllers/helpers/refresh_helper.go:106 +0x30
github.com/jesseduffield/gocui.(*Gui).onWorkerAux(0x110187278b40, 0x110187a92190, {0x154b438, 0x110187b12260})
lazygit/vendor/github.com/jesseduffield/gocui/gui.go:713 +0x8b
github.com/jesseduffield/gocui.(*Gui).OnWorker.func1()
lazygit/vendor/github.com/jesseduffield/gocui/gui.go:700 +0x3f
created by github.com/jesseduffield/gocui.(*Gui).OnWorker in goroutine 1
```
### Please check if the PR fulfills these requirements
* [x] Cheatsheets are up-to-date (run `go generate ./...`)
* [x] Code has been formatted (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#code-formatting))
* [ ] Tests have been added/updated (see
[here](https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md)
for the integration test guide)
* [x] Text is internationalised (see
[here](https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md#internationalisation))
* [x] If a new UserConfig entry was added, make sure it can be
hot-reloaded (see
[here](https://github.com/jesseduffield/lazygit/blob/master/docs/dev/Codebase_Guide.md#using-userconfig))
* [x] Docs have been updated if necessary
* [x] You've read through your own file changes for silly mistakes etc
Add new config options for the sort order of files vs. directories, and
for sorting case sensitively or not.
Set the sort order's default from the former foldersFirst to mixed, so
this is a change in behavior. I find this useful because it now matches
git's order, so if you look at the diff of a commit, the TOC at the top
has the same order as the file tree you see when entering the commit.
Closes#4070.
Set the sort order's default from the former foldersFirst to mixed, so this is a
change in behavior. I find this useful because it now matches git's order, so if
you look at the diff of a commit, the TOC at the top has the same order as the
file tree you see when entering the commit.
When you rebase a branch and there are conflicts, lazygit asks you to
continue the rebase when it detects that all conflicts have been
resolved. However, it is common to make additional changes beyond just
fixing the conflicts (e.g. to fix build failures), and when doing that
while the "Continue the rebase?" prompt is showing, lazygit detects that
too and asks you if you want to stage those newly modified files too.
This is all well and good (and can be disabled for those who don't like
it); however, lazygit would treat out-of-date submodules as unstaged
changes and would offer to stage those as well, and this is pretty bad
and almost never what you want. Fix this by excluding submodules from
that second check.
When you rebase a branch and there are conflicts, lazygit asks you to continue
the rebase when it detects that all conflicts have been resolved. However, it is
common to make additional changes beyond just fixing the conflicts (e.g. to fix
build failures), and when doing that while the "Continue the rebase?" prompt is
showing, lazygit detects that too and asks you if you want to stage those newly
modified files too. This is all well and good (and can be disabled for those who
don't like it); however, lazygit would treat out-of-date submodules as unstaged
changes and would offer to stage those as well, and this is pretty bad and
almost never what you want. Fix this by excluding submodules from that second
check.
This is the same option as used by
pkg.commands.git_commands.diff.GetDiff().
This fixes some operations patch operation (tested with moving patch to
another commit) with `git config set --global color.ui always` (or
`color.diff always`).
The README says that this keybinding is ctrl+z, but the default
keybinding is shift+z — looks like this was changed in
376ca65807.
This PR updates the shortcut in the README to match the current
keybinding.
Previously, when showing subcommits of a branch or tag, scrolling down,
and then going out and entering subcommits again, it would select the
first commit but keep the previous scroll position, so that the
selection was not visible.
Previously, when showing subcommits of a branch or tag, scrolling down, and then
going out and entering subcommits again, it would select the first commit but
keep the previous scroll position, so that the selection was not visible. Always
scroll to the top to fix this.
When selecting a directory containing many changed files, or when
range-selecting many changed files, and then discarding them, this could
be so slow that lazygit appeared to hang; especially since there was no
UI feedback (e.g. a spinning status message).
This PR improves the performance greatly by batching the individual git
calls into a single one if possible. It still doesn't add UI feedback
though, hoping that the operation is now fast enough that it isn't
needed.
While we're at it, we fix a bug that would cause "Discard unstaged
changes" to discard more than just the visible files when filtering by
path.
Fixes#4581.
This is probably the less severe case, but it could still be an issue for people
who have many modified top-level files they want to discard, and have
showRootItemInFileTree set to false; they could select all those files by
pressing 'v' and '>'.
Previously it would iterate over all changed files and call git checkout or git
reset for each one, which can take forever if there are hundreds or thousands of
files. Now it batches these into a single command if possible (taking care of
still passing the individual path names to the git call rather than just the
directory, which is necessary for making it work correctly when filtering --
this was actually broken for the "Discard unstaged changes" command, which is
fixed here).
When discarding a directory, we only want to discard those files that are
visible in the current filter view. The tests show that this already works
correctly for discarding all changes, but it doesn't for discarding only
unstaged changes: in this case, untracked files are handled correctly, but
changes to tracked files are discarded without respecting the filter.
We have integration tests for this functionality, but those only test the
behavior, not the performance. In these unit tests you can see that we make
individual calls to git checkout and git reset for each file, which is very slow
when there are lots of files.
Previously it would only check that *if* removeFile was called, the passed
argument was the expected one; but it didn't check whether it was called at all.
Improve this by recording the file names that are removed, and checking them at
the end of each scenario.
This is going to be even more important for the tests that we are about to add
in the next commit, because for those there can be several calls to removeFile
in a single scenario.
When switching to a different repo, and then back to the original one,
searching would no longer work. The reason is that our contexts set
callbacks on their views; when switching to a different repo we
instantiate a new set of contexts, so they will overwrite the views'
callbacks with their new ones, but when switching back to the original
repo, we reuse the old contexts because they are still in memory, but
they won't set their callbacks again since they only do this on
construction.
To fix this, replace the view-local callbacks with a global one on the
gui that takes the view as an argument, so that the callback can look up
the associated context dynamically.
When switching to a different repo, and then back to the original one, searching
would no longer work. The reason is that our contexts set callbacks on their
views; when switching to a different repo we instantiate a new set of contexts,
so they will overwrite the views' callbacks with their new ones, but when
switching back to the original repo, we reuse the old contexts because they are
still in memory, but they won't set their callbacks again since they only do
this on construction.
To fix this, replace the view-local callbacks with a global one on the gui that
takes the view as an argument, so that the callback can look up the associated
context dynamically.
Remove our dependency on go-git, which was including a ton of
third-party code for very little benefit.
In addition, this fixes the problem that lazygit wouldn't show any
branches or remotes for certain types of malformatted .git/config files,
e.g. when there's a config section like `[branch ""]`, `[remote ""]`, or
`[-remote "xyz"]`; see #3901 and #5112.
### PR Description
This PR adds support for clicking on arrows in the file changes list
view, so that a mouse can be used to expand/collapse directories. This
enhancement was raised here as issue #5088.
Can be used for doing additional click handling in list views.
Like the GetOnDoubleClick hook we should try to find a better design for this
than putting it in HasKeybindings and BaseContext, since it is only used by list
contexts.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
We have some documentation for the corresponding setters in IBaseContext, but
that's part of the controller infrastructure and not client facing. For somebody
implementing a new view, this is where they will probably look for what methods
they can override.
When this was originally introduced, it handled single clicks on a list entry
(treating them similar to a double-click by checking whether the click was on
the selected entry). Arguably it should have been called OnDoubleClick back then
already; but when we later changed it to do actual double-click detection (see
37197b8e9a), we should have renamed the methods.
If the showDivergenceFromBaseBranch config is not none, the expanded
branches panel would no longer show the remote branch and subject; the
reason was that we padded the name all the way to the right edge of the
view so that the divergence information is right-aligned.
To fix this, we simply don't right-align the divergence in half or full
screen mode. This is a bit unfortunate, but it's hard to do any better,
because we don't know the width of our column in advance. One thing I
tried is to make the divergence a separate column in that case (with an
explicit right-alignment set on it via getColumnAlignments; however,
this makes it harder to properly truncate the name when the window is
too narrow.
If the showDivergenceFromBaseBranch config is not none, the expanded branches
panel would no longer show the remote branch and subject; the reason was that we
padded the name all the way to the right edge of the view so that the divergence
information is right-aligned.
To fix this, we simply don't right-align the divergence in half or full screen
mode. This is a bit unfortunate, but it's hard to do any better, because we
don't know the width of our column in advance. One thing I tried is to make the
divergence a separate column in that case (with an explicit right-alignment set
on it via getColumnAlignments; however, this makes it harder to properly
truncate the name when the window is too narrow.
Given a block of consecutive changed lines, staging only some of those
changes didn't always work. Consider the following scenario:
```diff
@@ -1,5 +1,5 @@
a
-b
-c
-d
+b'
+c'
+d'
e
```
Trying to stage only the change to "d" worked already as expected, but
staging either "b" or "c" didn't; the order of the deleted and added
lines in staged changes were wrong. We don't solve the "c" case in this
PR, as it's probably uncommon enough so that it doesn't matter too much,
and it seems to be quite a bit harder than the other two (and git gui
doesn't support it either, for the record). But we fix the "b" case
here, which is probably the most common one.
Fixes#5103.
This fixes the problem; a consequence of this change is that given the following
scenario:
@@ -1,3 +1,3 @@
1
-2
+2b
3
staging only the line `+2b` will put it *before* the unchanged `2` line, rather
than after it as you might expect (the changed unit tests demonstrate this).
Since this should be a pretty uncommon scenario, I guess it is an ok compromise.
As you can see in the changed tests, while the behavior of what gets staged is
fixed now, it doesn't always correctly select the next line to stage. We'll
address this in the next commit.
This is a pretty special case (see comment in the test for details). It is
working correctly, but I almost broke it during development, so it's good to
cover it with a test.
Given a block of consecutive changed lines, trying to stage only some of them
doesn't work correctly in all cases:
- if the staged lines are the last lines in the block of changes, it already
works
- when staging some changes in the middle of the block, it doesn't work as
desired, but we also don't try to fix this case in this branch, because it's
harder to do, and not as common as the other two
- staging the first lines of the block doesn't work as desired, and we will fix
that in this branch.
### PR Description
When a branch is checked out by another worktree, show the worktree name
in the label, e.g. "(worktree cosmos2)" instead of just "(worktree)", so
you can immediately see which worktree holds it.
When a branch is checked out by another worktree, show the worktree
name in the label, e.g. "(worktree cosmos2)" instead of just
"(worktree)", so you can immediately see which worktree holds it.
When looking at a diff in diffing mode in the branches or tags panels
(e.g. after pressing `W` on a branch and then selecting a different
branch to diff it against the first one) it wasn't possible to change
the diff context size using `{` and `}`, or the rename threshold using
`(` and `)`.
Fixes#5254.
Actually, we simply enable them in any panel, even those that can never show a
diff. Since the commands show a toast, that's enough feedback to understand what
happened; the change will take effect the next time you switch to a panel that
does show diffs.
Same for ( and ) to change the rename threshold.
We did already have code to prevent clicks in inactive views behind a
popup, but it wasn't good enough. This PR fixes two problems:
- if the previously focused view (behind the panel) was a list view, it
would look like the click would select a different row, because gocui
would still set the view's cursor position, which is used to draw the
highlighted row
- it was still possible to click on tab headers, and this would dismiss
the panel
Fixes#5256.
This fixes two problems:
- if the previously focused view (behind the panel) was a list view, it would
look like the click would select a different row, because gocui would still
set the view's cursor position, which is used to draw the highlighted row
- it was still possible to click on tab headers, and this would dismiss the
panel
The symptom of the bug was that confirmation panels with wrapped text
were one character too wide, which could sometimes result in them being
one line too heigh. One concrete example is the "Discard file changes"
confirmation that appears when pressing `d` in the commit files panel.
I got confused when I investigated the bug that was fixed in the previous
commit, so hopefully these will be helpful for the next person reading this
code.
The symptom of the bug was that confirmation panels with wrapped text were one
character too wide, which could sometimes result in them being one line too
heigh. One concrete example is the "Discard file changes" confirmation that
appears when pressing `d` in the commit files panel.
I got very confused when investigating this bug, and the reason is that
getPopupPanelDimensionsAux took two parameters panelWidth and panelHeight, but
the second was actually contentHeight. Rename it to contentHeight, and change
the first one to also be the content width rather than the panel width. This is
easier for clients, and less confusing.
This commit implements the ability to cycle backward through different
all branches log visualization modes, complementing the existing forward
cycling functionality. Users can now press 'A' (Shift+a) to cycle in
reverse through the available log graph views, improving navigation
efficiency when they overshoot their desired view.
This commit implements the ability to cycle backward through different
all branches log visualization modes, complementing the existing forward
cycling functionality. Users can now press 'A' (Shift+a) to cycle in
reverse through the available log graph views, improving navigation
efficiency when they overshoot their desired view.
Changes:
- Added RotateAllBranchesLogIdxBackward() method to BranchCommands for
backward rotation through log command candidates
- Introduced AllBranchesLogGraphReverse keybinding configuration with
default key 'A' (uppercase)
- Implemented switchToOrRotateAllBranchesLogsBackward() handler in
StatusController that mirrors forward cycling logic
- Added English translation for "Show/cycle all branch logs (reverse)"
The implementation uses modulo arithmetic with proper handling of
negative indices to ensure seamless backward cycling through the
available log visualization options.
Fixes#5302
## Problem
When `.git/info` directory does not exist (can happen with bare clones,
manual deletion, or certain Git configurations), selecting "Add to
.git/info/exclude" fails with:
```
open <repo-path>/.git/info/exclude: no such file or directory
```
The `Exclude` function used `os.OpenFile` with `os.O_CREATE` which
creates the file but not its parent directory.
## Fix
Added `os.MkdirAll` to create the `.git/info` directory (with 0755
permissions) before attempting to open the exclude file. `MkdirAll` is a
no-op if the directory already exists, so existing behavior is
unchanged.
## Test
Added integration test `file/exclude_without_info_dir` that:
1. Removes `.git/info` directory during repo setup
2. Attempts to exclude a file via the menu
3. Verifies `.git/info/exclude` is created with the correct content
Test fails without the fix, passes with it.
Tested locally on macOS ARM (Apple Silicon). Unit tests and integration
test pass.
When .git/info directory does not exist (can happen with bare clones
or manual deletion), the Exclude function failed with 'no such file
or directory'. Added os.MkdirAll to create the directory before
opening the exclude file.
Added integration test exclude_without_info_dir that removes .git/info
before attempting to exclude a file.
### PR Description
The worktrees tab now displays the checked-out branch (or detached HEAD
state) for each worktree, making it much easier to see which worktree
holds which branch.
This is useful when you need to "unlock" a branch that's occupied by
another worktree: you can now clearly see which worktrees are on a
branch vs detached, without having to select each one individually.
Also rename the "(main)" label to "(main worktree)" to avoid confusion
with the common "main" branch name, and move it after the branch column.
The worktrees tab now displays the checked-out branch (or detached HEAD
state) for each worktree, making it much easier to see which worktree
holds which branch.
This is useful when you need to "unlock" a branch that's occupied by
another worktree: you can now clearly see which worktrees are on a
branch vs detached, without having to select each one individually.
Also rename the "(main)" label to "(main worktree)" to avoid confusion
with the common "main" branch name, and move it after the branch column.
### PR Description
Way back when I implemented filter functionality I could not muster the
motivation to apply it to the file views (files and commit files), but
it really should be used on them.
The text filter matches against the full file path (not just the
filename), which is more useful for navigating large directory trees.
When a text filter is active, all operations respect it consistently:
- **Diffs**: selecting a filtered directory shows only the diff of
visible files, not all files in the directory
- **Staging/unstaging**: pressing space on a filtered directory only
stages/unstages visible files
- **Toggle all (a)**: only toggles staging for visible files
- **Custom patch**: toggling a filtered directory only adds visible
files to the patch
Full disclosure, opus 4.6 wrote this entire PR but reviewing its changes
they seem reasonable, and I have done some local testing and everything
works as expected.
Change working tree files and commit files panels to use filtering
(reducing the list) instead of search (highlighting matches). This
matches the behavior of other filterable views.
The text filter matches against the full file path, not just the
filename, which is more useful for navigating large directory trees.
When toggling a directory for a custom patch while a text filter is
active, only the visible filtered files in the directory are affected,
consistent with how staging a directory in the files panel works.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Without this check, the selection was being reset to 0 whenever
ReApplyFilter was called for the current filter context, even when
the user wasn't actively typing in the search prompt (e.g. when the
model updates in the background). This was causing unexpected cursor
jumps.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When opening a filter prompt, reset PrevSearchIndex to -1 to avoid
stale search state from a previous search/filter session.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
This avoids a naming collision with GetFilter from the
IFilterableContext interface, which will be implemented by
FileTreeViewModel in the next commit.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
I always press 'd' in the patch building view, expecting that I can do
exactly what I can do in the staging view, to find out I need to go
space -> ctrl+p -> d and I think it's time to honour the muscle memory
and support this convenience keybinding. I recall we may have had a
debate about this in the past and if so I'm renewing my stance.
I always press 'd' in the patch building view, expecting that I can do
exactly what I can do in the staging view, to find out I need to go
space -> ctrl+p -> d and I think it's time to honour the muscle memory
and support this convenience keybinding.
We don't add the commands to the menu when we're rebasing, so it's pointless to
check this in the handlers.
I guess alternatively we could add all commands always, and strike out the ones
that are not applicable using DisabledReasons. But we don't usually do this in
menus (except the global keybindings menu).
Only mention resetting the patch when there actually is one. This way users have
to read less text in the normal case, and the added note hopefully stands out
more if there is one. Also, separate the note from the previous text by a blank
line.
"Remove" can be confusing when a deleted file is selected; in this cases it
actually "un-removes" it. "Discard" hopefully makes it clearer that we are
talking about the change to a file, and not the file itself.
If the bottom line is hidden (by setting `gui.showBottomLine` to false
in the config), don't show the "Fetching..." status because it changes
the layout, which should happen only in response to user actions.
However, keep the status for the first fetch after startup, and right
after switching repos, because in these cases it is useful to see when
the fetch is done.
Closes#5242.
If the bottom line is hidden (by setting gui.showBottomLine to false in the
config), don't show the "Fetching..." status because it changes the layout,
which should happen only in response to user actions.
However, keep the status for the first fetch after startup, and right after
switching repos, because in these cases it is useful to see when the fetch is
done.
### PR Description
Tweak regexp such that a trailing ":" is not included in the file path
extracted from a lazygit-edit URL.
Previously, when matching a URL containing the ":" separator but no line
number, such as `lazygit-edit:///path/to/file.ext:`, the trailing
separator would be included in the matched file path, so lazygit would
open the non-existent file `/path/to/file.ext:`. Notably, such urls are
created when using delta with the hyperlink feature, as suggested in
https://github.com/jesseduffield/lazygit/blob/master/docs/Custom_Pagers.md#delta,
and clicking a file path rather than a line number.
Fixes#5308
Tweak regexp such that a trailing ":" is not included in the file path
extracted from a lazygit-edit URL.
Previously, when matching a URL containing the ":" separator but no line
number, such as `lazygit-edit:///path/to/file.ext:`, the trailing
separator would be included in the matched file path, so lazygit would
open the non-existent file `/path/to/file.ext:`. Notably, such urls are
created when using delta with the hyperlink feature, as suggested in
https://github.com/jesseduffield/lazygit/blob/master/docs/Custom_Pagers.md#delta,
and clicking a file path rather than a line number.
There's too much manual work involved in releasing now (updating
translations, copying docs-master) to make automatic releases
infeasible. I'm not worried that I forget to release on the first
Saturday of every month.
Keeping the code commented out in case we want to re-enable it at some
point.
There's too much manual work involved in releasing now (updating translations,
copying docs-master) to make automatic releases infeasible. I'm not worried that
I forget to release on the first Saturday of every month.
Keeping the code commented out in case we want to re-enable it at some point.
This is a regression introduced with #5135. I didn't notice it because I
am using `gui.scrollOffBehavior: jump`, in which case the problem
wouldn't appear; it only happened with `scrollOffBehavior: margin`
(which is the default). In that case, if you used the arrow keys (or
j/k) to move the selection so that the view would start to scroll, empty
space would appear.
Fixes#5235.
This is a regression introduced with #5135. I didn't notice it because I am
using `gui.scrollOffBehavior: jump`, in which case the problem wouldn't appear;
it only happened with `scrollOffBehavior: margin` (which is the default). In
that case, if you used the arrow keys (or j/k) to move the selection so that the
view would start to scroll, empty space would appear.
### PR Description
Paths added to ignore/exclude files need to be prefixed with a forward
slash to point to a specific file in the directory tree.
Without that prefix a file at root called `file` (added to `.gitignore`
as `file`) would match with `./file` and `./src/file`.
Example flow:
1. User creates a directory called `tests` in root
2. User sees that it's tracked
3. User ignores the directory in Lazygit
4. Changes in `src/tests` are now missing - because `tests` without `/`
matches also directories lower in the tree
Paths added to ignore/exclude files need to be prefixed with a forward
slash to point to a specific file in the directory tree.
Without that prefix a file at root called `file` (added to `.gitignore`
as `file`) would match with `./file` and `./src/file`.
This brings in https://github.com/jesseduffield/gocui/pull/98 with the following
fix:
Fix rendering of CRLF sequence ('\r\n')
The FirstGraphemeCluster call returns this as a single character; we want to
treat it the same way as a single \n.
This would be a problem if e.g. a progress bar used \r repeatedly to paint over
the same line, and then printed a \n to move on to the next line; the last pair
of \r and \n was swallowed.
Another scenario where this was a problem was if you stream output of a command
to the log, and the command used \r\n as line feeds. This happens for example
for a background fetch that fails with an error; in that case we print the
combined output (stdout plus stderr) to the log after the command finished, and
for some reason it uses \r\n in that case (I can't actually explain why; when I
do `git fetch --all | xxd` I see only bare \n characters). All output would
appear on one line then.
Also, filter out escape sequences for character set designation; there's nothing
useful we can do with them. In practice, the only one that you are likely to see
is `ESC ( B`, which is sent as part of tput sgr0, which is sometimes used in
scripts to reset all graphics attributes to defaults.
### PR Description
I had a spare couple hours so figured I'd whip up a PR for a feature
I've wanted for a while.
I've optimised for muscle memory backwards compatibility here:
- Outside interactive rebase: press 'f' then instead of a confirmation
panel, a menu appears where you can choose to keep the selected commit's
message
- Inside interactive rebase: press 'f' then press 'c' to see the menu
for keeping the message, where if you press 'c' again it will retain the
current message. so 'fcc' is the chord to press.
We're also now showing the -C flag (which is what enables the behaviour)
against the todo.
I've picked the 'c' keybinding because 'C' was taken and it corresponds
to the flag. Previously that showed a warning about a change in
keybinding for cherry picking but it's been ages since we've made that
change so I'm happy to retire it.
I've optimised for muscle memory backwards compatibility here:
- Outside interactive rebase: press 'f' then instead of a confirmation
panel, a menu appears where you can choose to keep the selected commit's
message
- Inside interactive rebase: press 'f' then press 'c' to see the menu
for keeping the message, where if you press 'c' again it will retain the
current message. so 'fcc' is the chord to press.
We're also now showing the -C flag (which is what enables the behaviour)
against the todo.
I've picked the 'c' keybinding because 'C' was taken and it corresponds
to the flag. Previously that showed a warning about a change in
keybinding for cherry picking but it's been ages since we've made that
change so I'm happy to retire it.
Not used yet, we pass an empty string everywhere, to match the previous
behavior. Just extracting this into a separate commit to make the next one
smaller.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
It's been ages since we changed the key, users should hopefully be used to it by
now, and we want to reuse the key for something else later in the branch.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
On very large screens they would get ridiculously wide.
The limits we chose here are a little arbitrary:
- 80 for confirmations and prompts
- 90 for menus
- auto-wrap width plus 25 for the commit message editor (or 100 if
auto-wrap is off)
On very large screens they would get ridiculously wide.
The limits we chose here are a little arbitrary:
- 80 for confirmations and prompts
- 90 for menus
- auto-wrap width plus 25 for the commit message editor (or 100 if auto-wrap is
off)
To reproduce: open the keybindings menu ('?'), press '>' to select the
last line, esc to close it, open it again. The view would appear still
scrolled down, so the selected first line was out of view. Even worse,
if you open a different, shorter menu (e.g. the "View upstream reset
options..." menu in the Files panel), you'd only see the Cancel item,
the other ones were scrolled out of view.
This is a regression introduced with efd4298b5e (#5134).
To reproduce: open the keybindings menu ('?'), press '>' to select the last
line, esc to close it, open it again. The view would appear still scrolled down,
so the selected first line was out of view. Even worse, if you open a different,
shorter menu (e.g. the "View upstream reset options..." menu in the Files
panel), you'd only see the Cancel item, the other ones were scrolled out of
view.
This is a regression introduced with efd4298b5e (#5134).
When marking commits as good or bad during a bisect, a "git rev-list"
call would appear in the Command log. This is confusing, it's an
internal detail that is not interesting for the user to see.
When marking commits as good or bad during a bisect, a "git rev-list" call would
appear in the Command log. This is confusing, it's an internal detail that is
not interesting for the user to see.
### PR Description
- Updated `actions/github-script` from `v7` to `v8` in
`.github/workflows/close-issues.yml`
- Updated `actions/setup-go` from `v5` to `v6` in
`.github/workflows/release.yml`
- Updated `golangci/golangci-lint-action` from `v8` to `v9` in
`.github/workflows/ci.yml`
- Updated `actions/checkout` from `v4` to `v6` in
`.github/workflows/codespell.yml`
- Updated `actions/checkout` from `v4` to `v6` in
`.github/workflows/release.yml`
- Updated `peter-evans/create-pull-request` from `v7` to `v8` in
`.github/workflows/sponsors.yml`
- Updated `actions/download-artifact` from `v4` to `v7` in
`.github/workflows/ci.yml`
- Updated `actions/checkout` from `v4` to `v6` in
`.github/workflows/ci.yml`
- Updated `actions/checkout` from `v4` to `v6` in
`.github/workflows/sponsors.yml`
- Updated `actions/setup-go` from `v5` to `v6` in
`.github/workflows/ci.yml`
The changes ensure that the GitHub Action workflows are using the latest
versions of the actions, which include improved functionality and
compatibility. These updates will be tested in the CI pipeline of the
pull request.
If the ctrl-f function (Find base commit for fixup) finds a base commit
plus a bunch of fixup! commits for that base commit, it ignores those
fixups and selects the base commit. For the purpose of creating another
fixup commit on top this is always what you want, so I'm doing this
without adding a confirmation. If the user presses shift-A after that to
amend their changes though, they are guaranteed to get conflicts, so for
that case a warning might be useful; however, I find it unlikely that
users will want to amend changes to a commit that they already created
fixups for, so I'm just hoping that this won't happen in practice.
This implementation is a bit stricter than #5201, in that it only
ignores fixups if the first found commit is not a fixup itself; because
if it is, it's not clear whether the user wants to create another fixup
for both on top, or amend the changes into each one, in which case they
need to be staged individually.
When opening a PR, a "git ls-remote" call would appear in the Command
log. This is confusing, it's an internal detail that is not interesting
for the user to see.
When opening a PR, a "git ls-remote" call would appear in the Command log. This
is confusing, it's an internal detail that is not interesting for the user to
see.
This provides two fixes:
- proper handling of keypad keys on certain terminals (e.g. iTerm2)
- fix problems pasting certain emojis or east asian text on Windows
Terminal
Fixes#5171Fixes#5173
This provides two fixes:
- proper handling of keypad keys on certain terminals (e.g. iTerm2)
- fix problems pasting certain emojis or east asian text on Windows Terminal
When searching (not filtering) in a list view using `/`, moving the
selection now updates the "x of y" indicator of the search results to
the last one before the selection. Pressing `n` again searches from
there rather than from the previously shown result.
Also see corresponding gocui PR at
https://github.com/jesseduffield/gocui/pull/95.
Checking out a file discards all local modifications to that file;
checking out a directory discards modifications to all files in that
directory. This can result in lost work if the user isn't aware of this.
Instead of showing a confirmation (to which the user might press enter
too hastily, still losing their work), or showing a menu with
auto-stash/discard options, we simply show an error. The assumption is
that this is an unusual situation that users won't run into often, and
if they do, it's easy enough to manually address it by stashing or
discarding the changes as appropriate.
Fixes#5142.
This bumps our gocui dependency, which recently learned to render
multi-rune grapheme clusters properly. This fixes rendering of a lot of
emojis such as ⚡️ or 🏴.
Fixes#4854Fixes#4347Fixes#3811Fixes#3711Fixes#3606Fixes#3514Fixes#2702Fixes#2409
Draw only the visible lines of the reflogs panel, like we do for
commits.
Since the reflog can get very long, this saves some memory but
especially some UI thread lag. In one of my repos I had over 11'000
reflog entries (I guess I should prune them more regularly...), and
rendering them took ~600ms; since this happens on the UI thread, there
was an annoying stall for half a second after every background fetch,
for example (even if the reflog panel is not visible).
Since the reflog can get very long, this saves some memory but especially some
UI thread lag. In one of my repos I had over 11'000 reflog entries (I guess I
should prune them more regularly...), and rendering them took ~600ms; since this
happens on the UI thread, there was an annoying stall for half a second after
every background fetch, for example.
This fixes a bug in ListContextTrait.FocusLine whereby the view would go blank
when scrolling by page (using ',' or '.') in views that have
renderOnlyVisibleLines set to true but refreshViewportOnChange set to false.
Currently we don't have any such views; the only ones who use
renderOnlyVisibleLines are commits and subcommits, and they also use
refreshViewportOnChange. However, we are going to add one in the next commit,
and eventually it might be a good idea to convert all our list views to that by
default, and get rid of the renderOnlyVisibleLines flag.
Move SetContentLineCount into OverwriteLinesAndClearEverythingElse. Calling it
separately beforehand is not concurrency safe; we need both to happen
when the view's writeMutex is locked.
It is possible to scroll the selection out of view using the mouse
wheel; after doing this, it would sometimes scroll into view by itself
again, for example when a background fetch occurred. In the files panel
this would even happen every 10s with every regular files refresh.
Fix this by adding a scrollIntoView parameter to HandleFocus, which is
false by default, and is only set to true from controllers that change
the selection.
Fixes#5097.
We have this logic to avoid constantly rerendering the main view when hitting
up-arrow when you are already at the top of the list. That's good, but we do
want to scroll the selection into view if it is outside and you hit up or down,
no matter if it changed.
It is possible to scroll the selection out of view using the mouse wheel; after
doing this, it would sometimes scroll into view by itself again, for example
when a background fetch occurred. In the files panel this would even happen
every 10s with every regular files refresh.
Fix this by adding a scrollIntoView parameter to HandleFocus, which is false by
default, and is only set to true from controllers that change the selection.
We want to do this whenever we switch branches; it wasn't done consistently
though. There are many different ways to switch branches, and only some of these
would reset the selection of all three panels (branches, commits, and reflog).
We move the selection down by the number of commits that were reverted (to keep
the same commits selected). However, this only happens after refreshing, which
has rendered the main view with the wrong commit, so we need to render it again
after moving the selection.
There are many other callers of MoveSelection in LocalCommitsController, but all
of them happen before the refresh. Revert is special because it needs to move
the selection after refreshing, e.g. when reverting the only commit of a branch.
Now that we can use 'k' as a menu item binding (this was fixed in
#5131), use it for the "keep" entry in the merge menu. I don't think
this will be a problem for people's muscle memory, given that this menu
is not encountered every day; and it's simply the better keybinding.
This reverts commit b32b55201e.
Now that we can use 'k' as a menu item binding (this was fixed in #5131), use it
for the "keep" entry in the merge menu. I don't think this will be a problem for
people's muscle memory, given that this menu is not encountered every day; and
it's simply the better keybinding.
This reverts commit b32b55201e.
Previously they would be shown as keybindings in the menu, but they
didn't work because their builtin functionality (select next/prev line,
scroll view left/right) would take precedence.
This will allow us to revert #4934; doing that in a separate PR, see
#5132.
This is not really super important because we are very unlikely to assign a key
such as esc or up/down to a menu item. However, users might do this in a custom
commands menu, and in that case it is important that the builtin keys still
work; or they might remap those builtin commands to other keys, in which case
they might conflict with single-letter keys in normal menus.
The test shows two problems: a <down> keybinding is not removed from a menu item
(the 'y' binding is removed though, which is correct), and keybindings such as
'j' and 'H' don't work. We will fix both of these separately in the following
commits.
Thank you for an awesome tool. I wanted to add support for codeberg.
Tested locally that opening pull-request works
### PR Description
Codeberg is a Gitea-based git hosting service that uses the same URL
patterns for pull requests and commits but differs on its hostname
Codeberg is a Gitea-based git hosting service that uses the same URL
patterns for pull requests and commits. This adds native support so
users don't need to manually configure it.
The confirmation used to make sense back when the Open MergeTool command
was its own top-level command; however, that command was changed in
#4889 to open a menu instead, and Open MergeTool is now just a submenu
entry in that menu, so it no longer needs a confirmation.
Fixes#5093.
The confirmation used to make sense back when the Open MergeTool command was its
own top-level command; however, that command was changed in 703f053a7e to open a
menu instead, and Open MergeTool is now just a submenu entry in that menu, so it
no longer needs a confirmation.
2025-12-07 20:55:25 +01:00
1983 changed files with 145241 additions and 200444 deletions
# adapted from https://github.com/devcontainers/images/blob/main/src/go/.devcontainer/Dockerfile
# [Choice] Go version (use -bullseye variants on local arm64/Apple Silicon): 1, 1.19, 1.18, 1-bullseye, 1.19-bullseye, 1.18-bullseye, 1-buster, 1.19-buster, 1.18-buster
@@ -22,8 +22,4 @@ Add any other context or screenshots about the feature request here.
You may be able to add your desired feature with a custom command. Check out the examples here: https://github.com/jesseduffield/lazygit/wiki/Custom-Commands-Compendium
If a custom command does what you want but you still want to see the feature built-in to lazygit, feel free to paste the custom command into the issue to help us better understand the functionality you want.
We also encourage you to put up a PR yourself! Who cares if you've never written Go before, neither did any of the existing contributors before their first lazygit PR! Check out the PR tutorial here: https://www.youtube.com/watch?v=kNavnhzZHtk&ab_channel=JesseDuffield
Also check out the contributing guide here: https://github.com/jesseduffield/lazygit/blob/master/CONTRIBUTING.md
When contributing to this repository, please first discuss the change you wish
to make via issue, email, or any other method with the owners of this repository
before making a change.
This project does not accept pull requests. Don't bother making one, it won't be merged.
## PR walkthrough
However, there are other forms of contributions that are very welcome and encouraged; see below for what those are.
[This video](https://www.youtube.com/watch?v=kNavnhzZHtk) walks through the process of adding a small feature to lazygit. If you have no idea where to start, watching that video is a good first step.
## Why no PRs?
## Design principles
There are two main reasons for this, and I want to be very honest about them:
See [here](./VISION.md) for a set of design principles that we want to consider when building a feature or making a change.
- I am maintaining lazygit for fun, as a hobby in my free time (which is quite limited). I'd like to spend my free time on things that I enjoy doing. I enjoy working on lazygit's code and improving it myself; I don't enjoy reviewing PRs. It's that simple, really. Reviewing PRs takes a lot of time; time that I would rather spend on developing lazygit myself.
- Even if I had the time and inclination to review PRs, this has become quite difficult today: most PRs nowadays are AI-generated to some extent (often completely), which in itself is not necessarily a bad thing; I heavily use AI myself these days, and I get great results from it. However, agentic coding needs to be guided by humans so that the results are good, and for contributed PRs I can't tell to what extent the human contributor did this, or is even capable of it; and I don't want to do the work of guiding a contributor's coding agent. If I post PR review feedback and have to suspect that the contributor simply passes it on to their coding agent, then that is a work mode that doesn't make sense to me, and I would rather just drive my own agent to do the work.
-what the different packages in the codebase are for
-where important files live
- important concepts in the code
- how the event loop works
- other useful information
-You implemented a lazygit improvement that you want to use yourself; in this case it could make sense to let others merge this change into their forks if they find it useful too. And if enough people say they want the feature, this can persuade me to add it, so putting it out there to give it visibility can be helpful.
-You posted an issue for a feature request, and have a prototype that implements it; it could be useful to publish the branch as a draft PR to better illustrate how the feature works.
## All code changes happen through Pull Requests
For this reason I usually don't close pull requests to give them more visibility. Just don't expect your PR to be merged.
Pull requests are the best way to propose changes to the codebase. We actively
welcome your pull requests:
## So how can I contribute then?
1. Fork the repo and create your branch from `master`.
2. If you've added code that should be tested, add tests.
3. If you've added code that need documentation, update the documentation.
4. Write a [good commit message](http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html).
5. Issue that pull request!
There are other forms of contributions to a project besides source code that are very welcome and encouraged; for instance:
Please do not raise pull request from your fork's master branch: make a feature branch instead. Lazygit maintainers will sometimes push changes to your branch when reviewing a PR and we often can't do this if you use your master branch.
- File issues for bugs that you find, and I'll do my best to take care of fixing them (if they are important enough).
- File feature requests for new functionality that you want to see in lazygit. I have a lot of ideas for future improvement myself, but I have also implemented a lot of feature ideas that weren't mine, and I'm grateful for those ideas. (Of course, there are also lots of feature requests that I don't implement, so don't be disappointed if I don't jump on yours.)
- Help make other people's bug reports reproducible. Sometimes people report bugs that they have only seen once, and in such a case it can be helpful to come up with reproducible scenarios.
- Help complete or improve the translation into other languages; join https://crowdin.com/project/lazygit for that.
- Run a master build! This is probably the most valuable way to help me. Test the latest master not just by occasionally trying it, but by actually using it for your daily work; report any issues that you find. This will help prevent having to release hotfix updates for regressions that are only noticed by users updating to a new release.
If you've never written Go in your life, then join the club! Lazygit was the maintainer's first Go program, and most contributors have never used Go before. Go is widely considered an easy-to-learn language, so if you're looking for an open source project to gain dev experience, you've come to the right place.
## Commit history
We value a clean and useful commit history, so please take some time to organize your commits so that they make sense. Don't assume that they will be squashed on merge anyway; we don't do that here.
In particular:
- Refactorings and behavior changes should be in separate commits. There are very few exceptions where this is not possible, but in my experience they are very rare.
- Strive for minimal commits; every change that is independent from other changes should be in a commit of its own (with a good commit message that explains why the change is made).
- When you need to iterate over your implementation during review (e.g. because you discovered a bug, or a maintainer requested changes), don't just pile new commits on top. Use fixup commits to make your changes transparent while still maintaining a good commit history. If you don't know what that means, [here's a brief introduction](docs/Fixup_Commits.md).
## Running in a VSCode dev container
If you want to spare yourself the hassle of setting up your dev environment yourself (i.e. installing Go, extensions, and extra tools), you can run the Lazygit code in a VSCode dev container like so:
- you have the dev containers extension installed in VSCode
See [here](https://code.visualstudio.com/docs/devcontainers/containers) for more info about dev containers.
## Running in a Github Codespace
If you want to start contributing to Lazygit with the click of a button, you can open the lazygit codebase in a Codespace. First fork the repo, then click to create a codespace:
To run lazygit from within the integrated terminal just go `go run main.go`
This allows you to contribute to Lazygit without needing to install anything on your local machine. The Codespace has all the necessary tools and extensions pre-installed.
## Using Nix for development
If you use Nix, you can leverage the included flake to set up a complete development environment with all necessary dependencies:
```sh
nix develop
```
This will drop you into a development shell that includes:
- Latest Go toolchain
- golangci-lint for code linting
- git and make
You can also build and run lazygit using nix:
```sh
# Build lazygit
nix build
# Run lazygit directly
nix run
```
The nix flake supports multiple architectures (x86_64-linux, aarch64-linux, x86_64-darwin, aarch64-darwin) and provides a consistent development environment across different systems.
## Code of conduct
Please note by participating in this project, you agree to abide by the [code of conduct].
[code of conduct]: https://github.com/jesseduffield/lazygit/blob/master/CODE-OF-CONDUCT.md
## Any contributions you make will be under the MIT Software License
In short, when you submit code changes, your submissions are understood to be
under the same [MIT License](http://choosealicense.com/licenses/mit/) that
covers the project. Feel free to contact the maintainers if that's a concern.
## Report bugs using Github's [issues](https://github.com/jesseduffield/lazygit/issues)
We use GitHub issues to track public bugs. Report a bug by [opening a new
issue](https://github.com/jesseduffield/lazygit/issues/new); it's that easy!
## Go
This project is written in Go. Go is an opinionated language with strict idioms, but some of those idioms are a little extreme. Some things we do differently:
1. There is no shame in using `self` as a receiver name in a struct method. In fact we encourage it
2. There is no shame in prefixing an interface with 'I' instead of suffixing with 'er' when there are several methods on the interface.
3. If a struct implements an interface, we make it explicit with something like:
```go
var_MyInterface=&MyStruct{}
```
This makes the intent clearer and means that if we fail to satisfy the interface we'll get an error in the file that needs fixing.
### Code Formatting
To check code formatting [gofumpt](https://pkg.go.dev/mvdan.cc/gofumpt#section-readme) (which is a bit stricter than [gofmt](https://pkg.go.dev/cmd/gofmt)) is used.
VSCode will format the code correctly if you tell the Go extension to use `gofumpt` via your [`settings.json`](https://code.visualstudio.com/docs/getstarted/settings#_settingsjson)
by setting [`formatting.gofumpt`](https://github.com/golang/tools/blob/master/gopls/doc/settings.md#gofumpt-bool) to `true`:
```jsonc
// .vscode/settings.json
{
"gopls":{
"formatting.gofumpt":true
}
}
```
To run gofumpt from your terminal go:
```
go install mvdan.cc/gofumpt@latest && gofumpt -l -w .
```
## Programming Font
Lazygit supports [Nerd Fonts](https://www.nerdfonts.com) to render certain icons. Sometimes we use some of these icons verbatim in string literals in the code (mainly in tests), so you need to set your development environment to use a nerd font to see these.
## Internationalisation
Boy that's a hard word to spell. Anyway, lazygit is translated into several languages within the pkg/i18n package.
### For developers adding new text
If you need to render text to the user, you should add a new field to the TranslationSet struct in `pkg/i18n/english.go` and add the actual content within the `EnglishTranslationSet()` method in the same file. Then you can access via `gui.Tr.YourNewText` (or `self.c.Tr.YourNewText`, etc).
Note, we use 'Sentence case' for everything (so no 'Title Case' or 'whatever-it's-called-when-there's-no-capital-letters-case')
### For translators
Lazygit translations are managed through [Crowdin](https://crowdin.com/project/lazygit/). If you'd like to contribute translations:
1. Join the Crowdin project at https://crowdin.com/project/lazygit/
2. Select your target language and help translate missing strings
3. The translation files in `pkg/i18n/translations/` are managed by the maintainers - please don't edit them directly
For detailed information about the translation process, including how maintainers sync translations, see `pkg/i18n/translations/README.md`.
## Debugging
The easiest way to debug lazygit is to have two terminal tabs open at once: one for running lazygit (via `go run main.go -debug` in the project root) and one for viewing lazygit's logs (which can be done via `go run main.go --logs` or just `lazygit --logs`).
From most places in the codebase you have access to a logger e.g. `gui.Log.Warn("blah")` or `self.c.Log.Warn("blah")`.
If you find that the existing logs are too noisy, you can set the log level with e.g. `LOG_LEVEL=warn go run main.go -debug` and then only use `Warn` logs yourself.
If you need to log from code in the vendor directory (e.g. the `gocui` package), you won't have access to the logger, but you can easily add logging support by setting the `LAZYGIT_LOG_PATH` environment variable and using `logs.Global.Warn("blah")`. This is a global logger that's only intended for development purposes.
If you keep having to do some setup steps to reproduce an issue, read the Testing section below to see how to create an integration test by recording a lazygit session. It's pretty easy!
### VSCode debugger
If you want to trigger a debug session from VSCode, you can use the following snippet. Note that the `console` key is, at the time of writing, still an experimental feature.
```jsonc
// .vscode/launch.json
{
"version":"0.2.0",
"configurations":[
{
"name":"debug lazygit",
"type":"go",
"request":"launch",
"mode":"auto",
"program":"main.go",
"args":["--debug"],
"console":"externalTerminal"// <-- you need this to actually see the lazygit UI in a window while debugging
}
]
}
```
## Profiling
If you want to investigate what's contributing to CPU or memory usage, see [this separate document](docs/dev/Profiling.md).
## Testing
Lazygit has two kinds of tests: unit tests and integration tests. Unit tests go in files that end in `_test.go`, and are written in Go. For integration tests, see [here](https://github.com/jesseduffield/lazygit/blob/master/pkg/integration/README.md)
## Updating Gocui
Sometimes you will need to make a change in the gocui fork (https://github.com/jesseduffield/gocui). Gocui is the package responsible for rendering windows and handling user input. Here's the typical process to follow:
1. Make the changes in gocui inside lazygit's vendor directory so it's easy to test against lazygit
2. Copy the changes over to the actual gocui repo (clone it if you haven't already, and use the `awesome` branch, not `master`)
3. Raise a PR on the gocui repo with your changes
4. After that PR is merged, make a PR in lazygit bumping the gocui version. You can bump the version by running the following at the lazygit repo root:
```sh
./scripts/bump_gocui.sh
```
5. Raise a PR in lazygit with those changes
## Updating Lazycore
[Lazycore](https://github.com/jesseduffield/lazycore) is a repo containing shared functionality between lazygit and lazydocker. Sometimes you will need to make a change to that repo and import the changes into lazygit. Similar to updating Gocui, here's what you do:
1. Make the changes in lazycore inside lazygit's vendor directory so it's easy to test against lazygit
2. Copy the changes over to the actual lazycore repo (clone it if you haven't already, and use the `master` branch)
3. Raise a PR on the lazycore repo with your changes
4. After that PR is merged, make a PR in lazygit bumping the lazycore version. You can bump the version by running the following at the lazygit repo root:
```sh
./scripts/bump_lazycore.sh
```
Or if you're using VSCode, there is a bump lazycore task you can find by going `cmd+shift+p` and typing 'Run task'
5. Raise a PR in lazygit with those changes
## Improvements
If you can think of any way to improve these docs let us know.
Importantly, if you file issues (whether bug reports or feature requests), stay around to answer questions and discuss your issue. There are few things that I find more annoying than spending time on responding to someone's issue (sometimes even making a PR that addresses it), and to then never hear from the OP again. So please set up your Github notifications so that you see when there's activity on your issue, and continue to participate.
@@ -8,13 +8,13 @@ Lazygit's vision is to be the most enjoyable UI for git.
There are seven (sometimes contradictory) design principles we follow:
-Discoverability
-Simplicity
-Safety
-Power
-Speed
- Conformity with git
- Think of the codebase
-[Discoverability](#discoverability)
-[Simplicity](#simplicity)
-[Safety](#safety)
-[Power](#power)
-[Speed](#speed)
-[Conformity with git](#conformity-with-git)
-[Think of the codebase](#think-of-the-codebase)
### Discoverability
@@ -45,6 +45,7 @@ The git CLI is very complex but most git use cases are simple. Lazygit needs to
- Don't overwhelm the user with options
- Use sensible defaults
- We already have too many configuration options: think hard before adding any new ones
- A bit of elaboration on this one: in the past we made the mistake of adding new config options all the time for unimportant things. The thinking was: one user wants to have this new feature or behavior, we are not sure if everybody will like it, so we hide it behind a config. This seems good because we satisfy everybody's needs, but it's bad because if Config.md is pages and pages of text, most users will not bother reading all of it, so they won't be aware of the actually useful options among all the obscure ones. We should be much more conservative about adding new config options that only few users are likely to use.
### Safety
@@ -55,7 +56,7 @@ It's easy to screw things up in git so Lazygit should try to protect the user fr
- e.g. undo action
- the escape key should get you out of most transient situations (rebasing, diffing, etc)
## Power
### Power
Users shouldn't have to drop down the CLI _too_ often. Lazygit should be able to handle some complex use cases.
### Overriding the platform for default keybindings
A few keybindings have different defaults on macOS than on Linux and Windows (e.g. word-wise cursor movement in text inputs uses `alt` on macOS but `ctrl` elsewhere). Lazygit picks these based on the OS it's running on, but you can override that with the `LAZYGIT_KEYBINDING_PLATFORM` environment variable. Set it to `darwin`, `linux`, or `windows`; any other value is ignored and the actual OS is used.
This is useful when running lazygit in a Linux container that you access over ssh from a Mac, where you'd rather use the macOS keybindings.
### Example Keybindings For Colemak Users
```yaml
@@ -1078,9 +1158,11 @@ services:
Where:
-`gitDomain` stands for the domain used by git itself (i.e. the one present on clone URLs), e.g. `git.work.com`
-`provider` is one of `github`, `bitbucket`, `bitbucketServer`, `azuredevops`, `gitlab` or`gitea`
-`provider` is one of `github`, `bitbucket`, `bitbucketServer`, `azuredevops`, `gitlab`,`gitea` or `codeberg`
-`webDomain` is the URL where your git service exposes a web interface and APIs, e.g. `gitservice.work.com`
For the `github` provider, configuring an entry here also enables the pull-request icons in the branches panel for that host (e.g. a GitHub Enterprise Server instance). Lazygit picks up the auth token via the same mechanisms as the `gh` CLI: the `GH_ENTERPRISE_TOKEN` / `GITHUB_ENTERPRISE_TOKEN` environment variables, or `gh auth login --hostname <webDomain>`.
## Predefined commit message prefix
In situations where certain naming pattern is used for branches and commits, pattern can be used to populate commit message with prefix that is parsed from the branch name.
@@ -50,7 +50,7 @@ Custom command keybindings will appear alongside inbuilt keybindings when you vi
For a given custom command, here are the allowed fields:
| _field_ | _description_ | required |
|-----------------|----------------------|-|
| key | The key to trigger the command. Use a single letter or one of the values from [here](https://github.com/jesseduffield/lazygit/blob/master/docs/keybindings/Custom_Keybindings.md). Custom commands without a key specified can be triggered by selecting them from the keybindings (`?`) menu | no |
| key | The key to trigger the command. Use a single key or list of keys, as described in [Custom_Keybindings.md](https://github.com/jesseduffield/lazygit/blob/master/docs/keybindings/Custom_Keybindings.md). Custom commands without a key specified can be triggered by selecting them from the keybindings (`?`) menu | no |
| command | The command to run (using Go template syntax for placeholder values) | yes |
| context | The context in which to listen for the key (see [below](#contexts)) | yes |
| prompts | A list of prompts that will request user input before running the final command | no |
@@ -102,6 +102,7 @@ These fields are applicable to all prompts.
| type | One of 'input', 'confirm', 'menu', 'menuFromCommand' | yes |
| title | The title to display in the popup panel | no |
| key | Used to reference the entered value from within the custom command. E.g. a prompt with `key: 'Branch'` can be referred to as `{{.Form.Branch}}` in the command | yes |
| condition | A Go template expression; if it resolves to empty string or `false`, the prompt is skipped. See [Conditional prompts](#conditional-prompts) | no |
### Input
@@ -192,6 +193,7 @@ The permitted option fields are:
| name | The first part of the label | no |
| description | The second part of the label | no |
| value | the value that will be used in the command | yes |
| key | Keybinding to invoke this menu option without needing to navigate to it. Use a single key or list of keys, as described in [Custom_Keybindings.md](https://github.com/jesseduffield/lazygit/blob/master/docs/keybindings/Custom_Keybindings.md) | no |
If an option has no name the value will be displayed to the user in place of the name, so you're allowed to only include the value like so:
@@ -233,6 +235,34 @@ customCommands:
description:'branch for a release'
```
Here's an example of supplying keybindings for menu options:
```yml
customCommands:
- key:'a'
command:'echo {{.Form.BranchType | quote}}'
context:'commits'
prompts:
- type:'menu'
title:'What kind of branch is it?'
key:'BranchType'
options:
- value:'feature'
name:'feature branch'
description:'branch based off develop'
key:'f'
- value:'hotfix'
name:'hotfix branch'
description:'branch based off main for fast bug fixes'
key:'h'
- value:'release'
name:'release branch'
description:'branch for a release'
key:'r'
```
In this example, pressing 'f', 'h', or 'r' will directly select the corresponding option without needing to navigate to it first.
### Menu-from-command
| _field_ | _description_ | _required_ |
@@ -290,6 +320,41 @@ Here's an example using a command but not specifying anything else: so each line
In this example the 'Branch prefix' menu only appears if the user chose 'With prefix'. Otherwise it is skipped and `.Form.Prefix` defaults to empty string.
## Placeholder values
Your commands can contain placeholder strings using Go's [template syntax](https://jan.newmarch.name/golang/template/chapter-template.html). The template syntax is pretty powerful, letting you do things like conditionals if you want, but for the most part you'll simply want to be accessing the fields on the following objects:
Custom diff renderers are useful for showing a better rendering of a diff than git's builtin raw diff, and using one is strongly recommended (I personally prefer delta myself, but that's a matter of personal preference). There are three types of diff renderers that lazygit supports:
- **stdin filters**, e.g. [delta](#delta) and [diff-so-fancy](#diff-so-fancy). They take git's raw output as stdin and produce something nicer on stdout, and they are hooked up using git's GIT_PAGER mechanism. (These used to be called "custom pagers" in earlier lazygit versions.)
- **external diff programs**, e.g. difftastic; these are called using git's `--ext-diff` flag, and they take over diff generation from git completely rather than post-processing git's output.
- **git's raw output using custom arguments**; mainly useful for `--color-words` (or `--word-diff` if you are color blind).
Diff renderers are configured with the `diffRenderers` array in the `git` section of lazygit's config file; it is an array because you can have multiple entries that you can cycle through with the `|` key. This can be useful if you usually prefer a particular diff renderer, but want to use a different one for certain kinds of diffs.
Fields that are shared by all renderer types:
- **type** The type of diff renderer; choices are `stdinFilter`, `extDiff`, or `rawGit`. `stdinFilter` is the default, because it's the most common one; so you can omit this if you use delta.
- **name** A name that is shown in the status bar toast when cycling renderers; defaults to the first word of the renderer command, but can be useful e.g. to distinguish "delta" from "delta side-by-side" if you have entries for both.
Fields only for `stdinFilter`:
- **command** The command line to use for `GIT_PAGER`.
- **colorArg** whether you want the `--color=always` arg in your `git diff` command. Some diff renderers want it set to `always`, others want it set to `never`. The default is `always`, since that's what most renderers need.
Fields only for `extDiff`:
- **command** The command line to use for the `diff.external` git config. If left empty, it uses the global value of git's `diff.external` config; this can be useful if you also want to use it for diffs on the command line, and it also has the advantage that you can configure it per file type in `.gitattributes`; see https://git-scm.com/docs/gitattributes#_defining_an_external_diff_driver.
You can include the `{{diffContext}}` template variable to pass lazygit's current diff context size (the value controlled by the `{`/`}` keybindings) to the diff tool.
Fields only for `rawGit`:
- **args** The additional arguments to use in the `git diff` or `git show` call (e.g. `--color-words`)
A cool feature of delta is --hyperlinks, which renders clickable links for the line numbers in the left margin, and lazygit supports these. To use them, set the `command:` field to `delta --dark --paging=never --line-numbers --hyperlinks --hyperlinks-file-link-format="lazygit-edit://{path}:{line}"`; this allows you to click on an underlined line number in the diff to jump right to that same line in your editor.
Note that delta's `--navigate` option doesn't work in lazygit, for technical reasons.
## Diff-so-fancy
```yaml
git:
diffRenderers:
- command:diff-so-fancy
```
## ydiff
```yaml
gui:
sidePanelWidth:0.2# gives you more space to show things side-by-side
Lazygit supports custom pagers, [configured](/docs/Config.md) in the config.yml file (which can be opened by pressing `e` in the Status panel).
Support does not extend to Windows users, because we're making use of a package which doesn't have Windows support. However, see [below](#emulating-custom-pagers-on-windows) for a workaround.
Multiple pagers are supported; you can cycle through them with the `|` key. This can be useful if you usually prefer a particular pager, but want to use a different one for certain kinds of diffs.
Pagers are configured with the `pagers` array in the git section; here's an example for a multi-pager setup:
The `colorArg` key is for whether you want the `--color=always` arg in your `git diff` command. Some pagers want it set to `always`, others want it set to `never`. The default is `always`, since that's what most pagers need.
## Delta:
```yaml
git:
pagers:
- pager:delta --dark --paging=never
```
A cool feature of delta is --hyperlinks, which renders clickable links for the line numbers in the left margin, and lazygit supports these. To use them, set the `pager:` config to `delta --dark --paging=never --line-numbers --hyperlinks --hyperlinks-file-link-format="lazygit-edit://{path}:{line}"`; this allows you to click on an underlined line number in the diff to jump right to that same line in your editor.
## Diff-so-fancy
```yaml
git:
pagers:
- pager:diff-so-fancy
```
## ydiff
```yaml
gui:
sidePanelWidth:0.2# gives you more space to show things side-by-side
Be careful with this one, I think the homebrew and pip versions are behind master. I needed to directly download the ydiff script to get the no-pager functionality working.
## Using external diff commands
Some diff tools can't work as a simple pager like the ones above do, because they need access to the entire diff, so just post-processing git's diff is not enough for them. The most notable example is probably [difftastic](https://difftastic.wilfred.me.uk).
These can be used in lazygit by using the `externalDiffCommand` config; in the case of difftastic, that could be
```yaml
git:
pagers:
- externalDiffCommand:difft --color=always
```
The `colorArg` and `pager` options are not used in this case.
You can add whatever extra arguments you prefer for your difftool; for instance
Instead of setting this command in lazygit's `externalDiffCommand` config, you can also tell lazygit to use the external diff command that is configured in git itself (`diff.external`), by using
```yaml
git:
pagers:
- useExternalDiffGitConfig:true
```
This can be useful if you also want to use it for diffs on the command line, and it also has the advantage that you can configure it per file type in `.gitattributes`; see https://git-scm.com/docs/gitattributes#_defining_an_external_diff_driver.
## Emulating custom pagers on Windows
There is a trick to emulate custom pagers on Windows using a Powershell script configured as an external diff command. It's not perfect, but certainly better than nothing. To do this, save the following script as `lazygit-pager.ps1` at a convenient place on your disk:
```pwsh
#!/usr/bin/env pwsh
$old=$args[1].Replace('\','/')
$new=$args[4].Replace('\','/')
$path=$args[0]
gitdiff --no-index--no-ext-diff$old$new
|%{$_.Replace($old,$path).Replace($new,$path)}
|delta--width=$env:LAZYGIT_COLUMNS
```
Use the pager of your choice with the arguments you like in the last line of the script. Personally I wouldn't want to use lazygit anymore without delta's `--hyperlinks --hyperlinks-file-link-format="lazygit-edit://{path}:{line}"` args, see [above](#delta).
The main limitation of this approach compared to a "real" pager is that renames are not displayed correctly; they are shown as if they were modifications of the old file. (This affects only the hunk headers; the diff itself is always correct.)
@@ -2,15 +2,13 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
# Lazygit Keybindings
_Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
## Global keybindings
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-r> `` | Switch to a recent repo | |
| `` <pgup> (fn+up/shift+k) `` | Scroll up main window | |
| `` <pgdown> (fn+down/shift+j) `` | Scroll down main window | |
| `` <ctrl+r> `` | Switch to a recent repo | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Scroll up main window | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Scroll down main window | |
| `` @ `` | View command log options | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Push | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | Pull | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
@@ -19,20 +17,21 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` <c-p> `` | View custom patch options | |
| `` <ctrl+p> `` | View custom patch options | |
| `` m `` | View merge/rebase options | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | Refresh | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Cancel | |
| `` ? `` | Open keybindings menu | |
| `` <c-s> `` | View filter options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | Quit | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+s> `` | View filter options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Quit | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Edit config file | Open file in external editor. |
| `` z `` | Undo | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
@@ -42,11 +41,11 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` , `` | Previous page | |
| `` . `` | Next page | |
| `` < (<home>) `` | Scroll to top | |
| `` > (<end>) `` | Scroll to bottom | |
| `` <, <home> `` | Scroll to top | |
| `` >, <end> `` | Scroll to bottom | |
| `` v `` | Toggle range select | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Search the current view by text | |
| `` H `` | Scroll left | |
| `` L `` | Scroll right | |
@@ -57,13 +56,13 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy path to clipboard | |
| `` <ctrl+o> `` | Copy path to clipboard | |
| `` y `` | Copy to clipboard | |
| `` c `` | Checkout | Checkout file. This replaces the file in your working tree with the version from the selected commit. |
| `` d `` | Remove | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` d `` | Discard | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` o `` | Open file | Open file in default application. |
| `` e `` | Edit | Open file in external editor. |
| `` <space> `` | Toggle file included in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Toggle all files | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Enter file / Toggle directory collapsed | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
@@ -71,7 +70,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Search the current view by text | |
| `` / `` | Filter the current view by text | |
## Commit summary
@@ -84,11 +83,12 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Reword | Reword the selected commit's message. |
| `` R `` | Reword with editor | |
| `` d `` | Drop | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
@@ -97,27 +97,28 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` p `` | Pick | Mark the selected commit to be picked (when mid-rebase). This means that the commit will be retained upon continuing the rebase. |
| `` F `` | Create fixup commit | Create 'fixup!' commit for the selected commit. Later on, you can press `S` on this same commit to apply all above fixup commits. |
| `` S `` | Apply fixup commits | Squash all 'fixup!' commits, either above the selected commit, or all in current branch (autosquash). |
| `` <c-j> `` | Move commit down one | |
| `` <c-k> `` | Move commit up one | |
| `` <ctrl+j>, <alt+down> `` | Move commit down one | |
| `` <ctrl+k>, <alt+up> `` | Move commit up one | |
| `` V `` | Paste (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Amend commit with staged changes. If the selected commit is the HEAD commit, this will perform `git commit --amend`. Otherwise the commit will be amended via a rebase. |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <ctrl+l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` w `` | Commit changes without pre-commit hook | |
| `` A `` | Amend last commit | |
| `` C `` | Commit changes using git editor | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | Open file | Open file in default application. |
| `` i `` | Ignore or exclude file | |
@@ -153,13 +154,13 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | View upstream reset options | |
| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | Toggle file tree view | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` c `` | Checkout by name | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | Force checkout | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
@@ -192,10 +195,9 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Reset | |
| `` R `` | Rename branch | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` <tab> `` | Switch view | Switch to other view (staged/unstaged changes). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | Search the current view by text | |
@@ -228,14 +230,15 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | Go to previous hunk | |
| `` <right> `` | Go to next hunk | |
| `` <left>, h `` | Go to previous hunk | |
| `` <right>, l `` | Go to next hunk | |
| `` v `` | Toggle range select | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Copy selected text to clipboard | |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` o `` | Open file | Open file in default application. |
| `` e `` | Edit file | Open file in external editor. |
| `` <space> `` | Toggle lines in patch | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Exit custom patch builder | |
| `` / `` | Search the current view by text | |
@@ -243,11 +246,11 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | Go to previous hunk | |
| `` <right> `` | Go to next hunk | |
| `` <left>, h `` | Go to previous hunk | |
| `` <right>, l `` | Go to next hunk | |
| `` v `` | Toggle range select | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Copy selected text to clipboard | |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` d `` | Discard | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | Open file | Open file in default application. |
@@ -258,7 +261,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` c `` | Commit | Commit staged changes. |
| `` w `` | Commit changes without pre-commit hook | |
| `` C `` | Commit changes using git editor | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Search the current view by text | |
## Menu
@@ -273,39 +276,39 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
@@ -336,48 +339,48 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Drop | Remove the stash entry from the stash list. |
| `` n `` | New branch | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` w `` | New worktree | |
| `` r `` | Rename stash | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | View files | |
| `` w `` | View worktree options | |
| `` / `` | Filter the current view by text | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Open config file | Open file in default application. |
| `` e `` | Edit config file | Open file in external editor. |
| `` u `` | Check for update | |
| `` <enter> `` | Switch to a recent repo | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` } `` | 差分コンテキストサイズを増やす | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | 差分コンテキストサイズを減らす | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` <c-w> `` | 空白表示の切り替え | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+w> `` | 空白表示の切り替え | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` s `` | スカッシュ | 選択したコミットをその下のコミットにスカッシュします。スカッシュとは複数のコミットを1つにまとめる操作です。選択したコミットのメッセージが下のコミットに追加されます。 |
| `` f `` | フィックスアップ | 選択したコミットをその下のコミットにマージします。フィックスアップはスカッシュと似ていますが、選択したコミットのメッセージは破棄され、下のコミットのメッセージのみが保持されます。 |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | メッセージ変更 | 選択したコミットのメッセージを変更します。 |
| `` R `` | エディタでメッセージ変更 | |
| `` d `` | 削除 | 選択したコミットを削除します。これはリベースを通じてブランチからコミットを削除します。コミットが後続のコミットが依存する変更を行っている場合、マージコンフリクトを解決する必要があるかもしれません。 |
| `` y `` | コミット属性をクリップボードにコピー | コミット属性をクリップボードにコピーします（例：ハッシュ、URL、差分、メッセージ、作者）。 |
| `` o `` | ブラウザでコミットを開く | |
| `` n `` | コミットから新しいブランチを作成 | |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` ` `` | ファイルツリービューを切り替え | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` y `` | コミット属性をクリップボードにコピー | コミット属性をクリップボードにコピーします（例：ハッシュ、URL、差分、メッセージ、作者）。 |
| `` o `` | ブラウザでコミットを開く | |
| `` n `` | コミットから新しいブランチを作成 | |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` D `` | リセット | 作業ツリーのリセットオプション（例：作業ツリーの完全破棄）を表示します。 |
| `` ` `` | ファイルツリービューを切り替え | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` a `` | ハンクの選択を切り替える | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 選択したテキストをクリップボードにコピー | |
| `` <ctrl+o> `` | 選択したテキストをクリップボードにコピー | |
| `` o `` | ファイルを開く | デフォルトのアプリケーションでファイルを開きます。 |
| `` e `` | ファイルを編集 | 外部エディタでファイルを開きます。 |
| `` <space> `` | パッチ内の行を切り替え | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` y `` | コミット属性をクリップボードにコピー | コミット属性をクリップボードにコピーします（例：ハッシュ、URL、差分、メッセージ、作者）。 |
| `` o `` | ブラウザでコミットを開く | |
| `` n `` | コミットから新しいブランチを作成 | |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | 新しいワークツリー | |
| `` o `` | プルリクエストを作成 | |
| `` O `` | プルリクエスト作成オプションを表示 | |
| `` <c-y> `` | プルリクエストURLをクリップボードにコピー | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | プルリクエストURLをクリップボードにコピー | |
| `` c `` | 名前でチェックアウト | 名前でチェックアウトします。入力ボックスに「-」を入力すると、最後のブランチをチェックアウトすることができます。 |
| `` - `` | 直前のブランチにチェックアウト | |
| `` F `` | 強制チェックアウト | 選択したブランチを強制的にチェックアウトします。これにより、選択したブランチをチェックアウトする前にワーキングディレクトリ内のすべてのローカル変更が破棄されます。 |
| `` @ `` | 명령어 로그 메뉴 열기 | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | 푸시 | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | 업데이트 | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
@@ -19,20 +17,21 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` } `` | Diff 보기의 변경 사항 주위에 표시되는 컨텍스트의 크기를 늘리기 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Diff 보기의 변경 사항 주위에 표시되는 컨텍스트 크기 줄이기 | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` <c-p> `` | 커스텀 Patch 옵션 보기 | |
| `` <ctrl+p> `` | 커스텀 Patch 옵션 보기 | |
| `` m `` | View merge/rebase options | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | 새로고침 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | 다음 스크린 모드 (normal/half/fullscreen) | |
| `` _ `` | 이전 스크린 모드 | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | 취소 | |
| `` ? `` | 매뉴 열기 | |
| `` <c-s> `` | View filter-by-path options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | Diff 메뉴 열기 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | Diff 메뉴 열기 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | 종료 | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | 공백문자를 Diff 뷰에서 표시 여부 전환 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+s> `` | View filter-by-path options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Diff 메뉴 열기 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | 종료 | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | 공백문자를 Diff 뷰에서 표시 여부 전환 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | 설정 파일 수정 | Open file in external editor. |
| `` z `` | 되돌리기 (reflog) (실험적) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | 다시 실행 (reflog) (실험적) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
@@ -42,11 +41,11 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` , `` | 이전 페이지 | |
| `` . `` | 다음 페이지 | |
| `` < (<home>) `` | 맨 위로 스크롤 | |
| `` > (<end>) `` | 맨 아래로 스크롤 | |
| `` <, <home> `` | 맨 위로 스크롤 | |
| `` >, <end> `` | 맨 아래로 스크롤 | |
| `` v `` | 드래그 선택 전환 | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | 검색 시작 | |
| `` H `` | 우 스크롤 | |
| `` L `` | 좌 스크롤 | |
@@ -64,20 +63,20 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 브라우저에서 커밋 열기 | |
| `` n `` | 커밋에서 새 브랜치를 만듭니다. | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
@@ -96,30 +95,30 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Drop | Remove the stash entry from the stash list. |
| `` n `` | 새 브랜치 생성 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 브라우저에서 커밋 열기 | |
| `` n `` | 커밋에서 새 브랜치를 만듭니다. | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
@@ -145,11 +144,11 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | Pick hunk | |
| `` b `` | Pick all hunks | |
| `` <up> `` | 이전 hunk를 선택 | |
| `` <down> `` | 다음 hunk를 선택 | |
| `` <left> `` | 이전 충돌을 선택 | |
| `` <right> `` | 다음 충돌을 선택 | |
| `` b `` | Pick both hunks | |
| `` <up>, k `` | 이전 hunk를 선택 | |
| `` <down>, j `` | 다음 hunk를 선택 | |
| `` <left>, h `` | 이전 충돌을 선택 | |
| `` <right>, l `` | 다음 충돌을 선택 | |
| `` z `` | 되돌리기 | Undo last merge conflict resolution. |
| `` e `` | 파일 편집 | Open file in external editor. |
| `` o `` | 파일 닫기 | Open file in default application. |
@@ -160,8 +159,8 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` mouse wheel down (fn+up) `` | 아래로 스크롤 | |
| `` mouse wheel up (fn+down) `` | 위로 스크롤 | |
| `` <mouse wheel down> (fn+up) `` | 아래로 스크롤 | |
| `` <mouse wheel up> (fn+down) `` | 위로 스크롤 | |
| `` <tab> `` | 패널 전환 | Switch to other view (staged/unstaged changes). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | 검색 시작 | |
@@ -170,14 +169,15 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | 이전 hunk를 선택 | |
| `` <right> `` | 다음 hunk를 선택 | |
| `` <left>, h `` | 이전 hunk를 선택 | |
| `` <right>, l `` | 다음 hunk를 선택 | |
| `` v `` | 드래그 선택 전환 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` <ctrl+o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` o `` | 파일 닫기 | Open file in default application. |
| `` e `` | 파일 편집 | Open file in external editor. |
| `` <space> `` | Line(s)을 패치에 추가/삭제 | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Exit custom patch builder | |
| `` / `` | 검색 시작 | |
@@ -185,11 +185,11 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | 이전 hunk를 선택 | |
| `` <right> `` | 다음 hunk를 선택 | |
| `` <left>, h `` | 이전 hunk를 선택 | |
| `` <right>, l `` | 다음 hunk를 선택 | |
| `` v `` | 드래그 선택 전환 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` <ctrl+o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` <space> `` | Staged 전환 | 선택한 행을 staged / unstaged |
| `` d `` | 변경을 삭제 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | 파일 닫기 | Open file in default application. |
@@ -200,21 +200,23 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` c `` | 커밋 변경내용 | 스테이징된 변경 사항 커밋. |
| `` w `` | Commit changes without pre-commit hook | |
| `` C `` | Git 편집기를 사용하여 변경 내용을 커밋합니다. | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` o `` | 풀 리퀘스트 생성 | |
| `` O `` | 풀 리퀘스트 생성 옵션 | |
| `` <c-y> `` | 풀 리퀘스트 URL을 클립보드에 복사 | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | 풀 리퀘스트 URL을 클립보드에 복사 | |
| `` c `` | 이름으로 체크아웃 | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | 강제 체크아웃 | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
@@ -227,28 +229,27 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | View reset options | |
| `` R `` | 브랜치 이름 변경 | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` s `` | 스쿼시 | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | 커밋메시지 변경 | Reword the selected commit's message. |
| `` R `` | 에디터에서 커밋메시지 수정 | |
| `` d `` | 커밋 삭제 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
@@ -306,40 +308,41 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` F `` | Create fixup commit | Create fixup commit for this commit |
| `` S `` | Apply fixup commits | Squash all 'fixup!' commits above selected commit (autosquash) |
| `` <c-j> `` | 커밋을 1개 아래로 이동 | |
| `` <c-k> `` | 커밋을 1개 위로 이동 | |
| `` <ctrl+j>, <alt+down> `` | 커밋을 1개 아래로 이동 | |
| `` <ctrl+k>, <alt+up> `` | 커밋을 1개 위로 이동 | |
| `` V `` | 커밋을 붙여넣기 (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Amend commit with staged changes |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | 로그 메뉴 열기 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <ctrl+l> `` | 로그 메뉴 열기 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 브라우저에서 커밋 열기 | |
| `` n `` | 커밋에서 새 브랜치를 만듭니다. | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <space> `` | Toggle file included in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Toggle all files included in patch | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Enter file to add selectedlines to the patch (or toggle directory collapsed) | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
@@ -347,7 +350,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | 검색 시작 | |
| `` / `` | Filter the current view by text | |
## 커밋메시지
@@ -360,31 +363,31 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy tag to clipboard | |
| `` <ctrl+o> `` | Copy tag to clipboard | |
| `` <space> `` | 체크아웃 | Checkout the selected tag as a detached HEAD. |
| `` n `` | 태그를 생성 | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
| `` w `` | New worktree | |
| `` d `` | 삭제 | View delete options for local/remote tag. |
| `` P `` | 태그를 push | Push the selected tag to a remote. You'll be prompted to select a remote. |
| `` g `` | 초기화 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` <space> `` | Staged 전환 | Toggle staged for selected file. |
| `` <c-b> `` | 파일을 필터하기 (Staged/unstaged) | |
| `` <ctrl+b> `` | 파일을 필터하기 (Staged/unstaged) | |
| `` y `` | 클립보드에 복사 | |
| `` c `` | 커밋 변경내용 | 스테이징된 변경 사항 커밋. |
| `` w `` | Commit changes without pre-commit hook | |
| `` A `` | 마지맛 커밋 수정 | |
| `` C `` | Git 편집기를 사용하여 변경 내용을 커밋합니다. | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | 파일 닫기 | Open file in default application. |
| `` i `` | Ignore file | |
@@ -397,13 +400,13 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | View upstream reset options | |
| `` D `` | 초기화 | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | 파일 트리뷰로 전환 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
@@ -2,39 +2,38 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
# Lazygit Sneltoetsen
_Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
## Globale sneltoetsen
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-r> `` | Wissel naar een recente repo | |
| `` <pgup> (fn+up/shift+k) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` <pgdown> (fn+down/shift+j) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` @ `` | View commandlog options | View options for the commandlog e.g. show/hide the commandlog and focus the command log. |
| `` P `` | Push | Push the current branch to its upstreambranch. If no upstream is configured, you will be prompted to configure an upstreambranch. |
| `` p `` | Pull | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstreambranch. |
| `` <ctrl+r> `` | Wissel naar een recente repo | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` P `` | Push | Push de huidige branch naar de bijbehorende upstream-branch. Als er geen upstream is geconfigureerd wordt er gevraagd om een upstream-branch te configureren. |
| `` p `` | Pull | Pull wijzigingen van de remote voor de huidige branch. Als er geen upstream is geconfigureerd wordt er gevraagd om een upstream-branch te configureren. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shellcommand | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Bekijk merge/rebase opties | Toon abort/continue/skip opties voor huidige merge/rebase. |
| `` R `` | Verversen | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | Volgende scherm modus (normaal/half/groot) | |
| `` _ `` | Vorige scherm modus | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Annuleren | |
| `` ? `` | Open menu | |
| `` <c-s> `` | Bekijk scoping opties | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | Quit | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+s> `` | Bekijk scoping opties | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Afsluiten | |
| `` <ctrl+z> `` | Pauzeer de applicatie | |
| `` <ctrl+w> `` | Witruimte weergeven in-/uitschakelen | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Verander config bestand | Open bestand in externe editor. |
| `` z `` | Ongedaan maken (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo (via reflog) (experimenteel) | Het reflog wordt gebruikt om te bepalen welk git commando moet worden gebruikt om het laatste git commando te herhalen. Wijzigingen aan de working tree worden niet meegenomen, alleen command's zijn kandidaten. |
## Lijstpaneel navigatie
@@ -42,14 +41,14 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` , `` | Vorige pagina | |
| `` . `` | Volgende pagina | |
| `` < (<home>) `` | Scroll naar boven | |
| `` > (<end>) `` | Scroll naar beneden | |
| `` <, <home> `` | Scroll naar boven | |
| `` >, <end> `` | Scroll naar beneden | |
| `` v `` | Toggle drag selecteer | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Start met zoeken | |
| `` H `` | Scroll left | |
| `` L `` | Scroll right | |
| `` H `` | Scroll naar links | |
| `` L `` | Scroll naar rechts | |
| `` ] `` | Volgende tabblad | |
| `` [ `` | Vorige tabblad | |
@@ -57,17 +56,17 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Kopieer de bestandsnaam naar het klembord | |
| `` <ctrl+o> `` | Kopieer de bestandsnaam naar het klembord | |
| `` w `` | Commit veranderingen zonder pre-commit hook | |
| `` A `` | Wijzig laatste commit | |
| `` C `` | Commit veranderingen met de git editor | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | Open bestand | Open file in default application. |
| `` <ctrl+f> `` | Find base commit for fixup | Vind de commit waar je huidige wijzigingen bovenop zijn gebouwd met als doel die commit te amenden/fixen. Hierdoor hoef je dit niet met de hand te doen. Zie: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open bestand in externe editor. |
| `` o `` | Open bestand | Open bestand in standaardapplicatie. |
| `` i `` | Ignore or exclude file | |
| `` r `` | Refresh bestanden | |
| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
@@ -76,15 +75,15 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <enter> `` | Stage individuele hunks/lijnen | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
| `` d `` | Bekijk 'veranderingen ongedaan maken' opties | View options for discarding changes to the selected file. |
| `` g `` | Bekijk upstream reset opties | |
| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
| `` D `` | Resetten | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | Toggle bestandsboom weergave | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` o `` | Maak een pull-request | |
| `` O `` | Bekijk opties voor pull-aanvraag | |
| `` <c-y> `` | Kopieer de URL van het pull-verzoek naar het klembord | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | Kopieer de URL van het pull-verzoek naar het klembord | |
| `` c `` | Uitchecken bij naam | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` - `` | Vorige branch uitchecken | |
| `` F `` | Forceer checkout | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
| `` d `` | Delete | View delete options for local/remote branch. |
| `` r `` | Rebase branch | Rebase the checked-out branch onto the selected branch. |
| `` d `` | Verwijderen | View delete options for local/remote branch. |
| `` r `` | Rebase branch | Rebase de uitgecheckte branch bovenop de geselecteerde branch. |
| `` M `` | Merge in met huidige checked out branch | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` f `` | Fast-forward deze branch vanaf zijn upstream | Fast-forward selected branch from its upstream. |
| `` T `` | Creëer tag | |
@@ -118,10 +119,9 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Bekijk reset opties | |
| `` R `` | Hernoem branch | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` <space> `` | Toggle bestand inbegrepen in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Toggle all files | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Enter bestand om geselecteerde regels toe te voegen aan de patch | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
| `` ` `` | Toggle bestandsboom weergave | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` = `` | Vouw alle bestanden uit | Vouw alle mappen in de bestandsstructuur uit |
| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` r `` | Hernoem commit | Reword the selected commit's message. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Hernoem commit | Herschrijf de commit message van de geselecteerde commit. |
| `` R `` | Hernoem commit met editor | |
| `` d `` | Verwijder commit | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` i `` | Start interactieve rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` p `` | Pick | Kies commit (wanneer midden in rebase) |
| `` <ctrl+k>, <alt+up> `` | Verplaats commit 1 naar boven | |
| `` V `` | Plak commits (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` B `` | Markeer als basiscommit voor rebase | Selecteer een basiscommit voor de volgende rebase. Als je rebased op een branch worden alleen commits boven de basiscommit meegenomen. Hiervoor wordt het `git rebase --onto` commando gebruikt. |
| `` A `` | Amend | Wijzig commit met staged veranderingen |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
| `` t `` | Revert | Maak een revert commit voor de geselecteerde commit, die de wijzigingen in deze commit terugdraait. |
| `` T `` | Tag commit | Maak een nieuwe tag die naar de geselecteerde commit wijst. Je wordt gevraagd om een tag naam en optionele omschrijving. |
| `` <ctrl+l> `` | Log opties weergeven | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Uitchecken | Check de geselecteerde branch uit als een detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Sluit lijn-bij-lijn modus | |
| `` / `` | Start met zoeken | |
@@ -251,48 +254,48 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <space> `` | Uitchecken | Check de geselecteerde branch uit als een detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <c-o> `` | Kopieer branch name naar klembord | |
| `` <space> `` | Uitchecken | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
| `` <ctrl+o> `` | Kopieer branch name naar klembord | |
| `` <space> `` | Uitchecken | Geselecteerde remote branch uitchecken als nieuwe locale branch of als detached head. |
| `` n `` | Nieuwe branch | |
| `` w `` | New worktree | |
| `` M `` | Merge in met huidige checked out branch | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` r `` | Rebase branch | Rebase the checked-out branch onto the selected branch. |
| `` d `` | Delete | Delete the remote branch from the remote. |
| `` u `` | Set as upstream | Stel in als upstream van uitgecheckte branch |
| `` r `` | Rebase branch | Rebase de uitgecheckte branch bovenop de geselecteerde branch. |
| `` d `` | Verwijderen | Delete the remote branch from the remote. |
| `` u `` | Instellen als upstream | Stel in als upstream van uitgecheckte branch |
| `` s `` | Sort order | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` d `` | Verwijdert change (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | Open bestand | Open file in default application. |
| `` e `` | Verander bestand | Open file in external editor. |
| `` o `` | Open bestand | Open bestand in standaardapplicatie. |
| `` e `` | Verander bestand | Open bestand in externe editor. |
| `` <esc> `` | Ga terug naar het bestanden paneel | |
| `` <tab> `` | Ga naar een ander paneel | Switch to other view (staged/unstaged changes). |
| `` E `` | Edit hunk | Edit selected hunk in external editor. |
| `` w `` | Commit veranderingen zonder pre-commit hook | |
| `` C `` | Commit veranderingen met de git editor | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Vind de commit waar je huidige wijzigingen bovenop zijn gebouwd met als doel die commit te amenden/fixen. Hierdoor hoef je dit niet met de hand te doen. Zie: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Start met zoeken | |
## Stash
@@ -336,50 +339,50 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Laten vallen | Remove the stash entry from the stash list. |
| `` n `` | Nieuwe branch | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` r `` | Rename stash | |
| `` w `` | New worktree | |
| `` r `` | Hernoem stash | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | Bekijk gecommite bestanden | |
| `` w `` | View worktree options | |
| `` / `` | Filter the current view by text | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Open config bestand | Open file in default application. |
| `` e `` | Verander config bestand | Open file in external editor. |
| `` e `` | Verander config bestand | Open bestand in externe editor. |
| `` u `` | Check voor updates | |
| `` <enter> `` | Wissel naar een recente repo | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Uitchecken | Check de geselecteerde branch uit als een detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
@@ -409,6 +412,6 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` n `` | New worktree | |
| `` <space> `` | Switch | Switch to the selected worktree. |
| `` o `` | Open in editor | |
| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
| `` o `` | Openen in editor | |
| `` d `` | Verwijderen | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
@@ -2,37 +2,36 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
# Lazygit Skróty klawiszowe
_Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
## Globalne skróty klawiszowe
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-r> `` | Przełącz na ostatnie repozytorium | |
| `` <pgup> (fn+up/shift+k) `` | Przewiń główne okno w górę | |
| `` <pgdown> (fn+down/shift+j) `` | Przewiń główne okno w dół | |
| `` <ctrl+r> `` | Przełącz na ostatnie repozytorium | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Przewiń główne okno w górę | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Przewiń główne okno w dół | |
| `` @ `` | Pokaż opcje dziennika poleceń | Pokaż opcje dla dziennika poleceń, np. pokazywanie/ukrywanie dziennika poleceń i skupienie na dzienniku poleceń. |
| `` P `` | Wypchnij | Wypchnij bieżącą gałąź do jej gałęzi nadrzędnej. Jeśli nie skonfigurowano gałęzi nadrzędnej, zostaniesz poproszony o skonfigurowanie gałęzi nadrzędnej. |
| `` p `` | Pociągnij | Pociągnij zmiany z zdalnego dla bieżącej gałęzi. Jeśli nie skonfigurowano gałęzi nadrzędnej, zostaniesz poproszony o skonfigurowanie gałęzi nadrzędnej. |
| `` p `` | Pociągnij | Pociągnij zmiany ze zdalnego dla bieżącej gałęzi. Jeśli nie skonfigurowano gałęzi nadrzędnej, zostaniesz poproszony o skonfigurowanie gałęzi nadrzędnej. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Zwiększ rozmiar kontekstu w widoku różnic | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Zmniejsz rozmiar kontekstu w widoku różnic | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Pokaż opcje scalania/rebase | Pokaż opcje do przerwania/kontynuowania/pominięcia bieżącego scalania/rebase. |
| `` R `` | Odśwież | Odśwież stan git (tj. uruchom `git status`, `git branch`, itp. w tle, aby zaktualizować zawartość paneli). To nie uruchamia `git fetch`. |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Anuluj | |
| `` ? `` | Otwórz menu przypisań klawiszy | |
| `` <c-s> `` | Pokaż opcje filtrowania | Pokaż opcje filtrowania dziennika commitów, tak aby pokazywane były tylko commity pasujące do filtra. |
| `` W `` | Pokaż opcje różnicowania | Pokaż opcje dotyczące różnicowania dwóch refów, np. różnicowanie względem wybranego refa, wprowadzanie refa do różnicowania i odwracanie kierunku różnic. |
| `` <c-e> `` | Pokaż opcje różnicowania | Pokaż opcje dotyczące różnicowania dwóch refów, np. różnicowanie względem wybranego refa, wprowadzanie refa do różnicowania i odwracanie kierunku różnic. |
| `` q `` | Wyjdź | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | Przełącz białe znaki | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+s> `` | Pokaż opcje filtrowania | Pokaż opcje filtrowania dziennika commitów, tak aby pokazywane były tylko commity pasujące do filtra. |
| `` W, <ctrl+e> `` | Pokaż opcje różnicowania | Pokaż opcje dotyczące różnicowania dwóch refów, np. różnicowanie względem wybranego refa, wprowadzanie refa do różnicowania i odwracanie kierunku różnic. |
| `` q, <ctrl+c> `` | Wyjdź | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Przełącz białe znaki | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` z `` | Cofnij | Dziennik reflog zostanie użyty do określenia, jakie polecenie git należy uruchomić, aby cofnąć ostatnie polecenie git. Nie obejmuje to zmian w drzewie roboczym; brane są pod uwagę tylko commity. |
| `` Z `` | Ponów | Dziennik reflog zostanie użyty do określenia, jakie polecenie git należy uruchomić, aby ponowić ostatnie polecenie git. Nie obejmuje to zmian w drzewie roboczym; brane są pod uwagę tylko commity. |
@@ -42,11 +41,11 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
|-----|--------|-------------|
| `` , `` | Poprzednia strona | |
| `` . `` | Następna strona | |
| `` < (<home>) `` | Przewiń do góry | |
| `` > (<end>) `` | Przewiń do dołu | |
| `` <, <home> `` | Przewiń do góry | |
| `` >, <end> `` | Przewiń do dołu | |
| `` v `` | Przełącz zaznaczenie zakresu | |
| `` <s-down> `` | Zaznacz zakres w dół | |
| `` <s-up> `` | Zaznacz zakres w górę | |
| `` <shift+down> `` | Zaznacz zakres w dół | |
| `` <shift+up> `` | Zaznacz zakres w górę | |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
| `` H `` | Przewiń w lewo | |
| `` L `` | Przewiń w prawo | |
@@ -57,40 +56,42 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` s `` | Scal | Scal wybrany commit z commitami poniżej. Wiadomość wybranego commita zostanie dołączona do commita poniżej. |
| `` f `` | Poprawka | Włącz wybrany commit do commita poniżej. Podobnie do fixup, ale wiadomość wybranego commita zostanie odrzucona. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` d `` | Usuń | Usuń wybrany commit. To usunie commit z gałęzi za pomocą rebazowania. Jeśli commit wprowadza zmiany, od których zależą późniejsze commity, być może będziesz musiał rozwiązać konflikty scalania. |
| `` e `` | Edytuj (rozpocznij interaktywne rebazowanie) | Edytuj wybrany commit. Użyj tego, aby rozpocząć interaktywne rebazowanie od wybranego commita. Podczas trwania rebazowania, to oznaczy wybrany commit do edycji, co oznacza, że po kontynuacji rebazowania, rebazowanie zostanie wstrzymane na wybranym commicie, aby umożliwić wprowadzenie zmian. |
| `` i `` | Rozpocznij interaktywny rebase | Rozpocznij interaktywny rebase dla commitów na twoim branchu. To będzie zawierać wszystkie commity od HEAD do pierwszego commita scalenia lub commita głównego brancha.<br>Jeśli chcesz zamiast tego rozpocząć interaktywny rebase od wybranego commita, naciśnij `e`. |
| `` p `` | Wybierz | Oznacz wybrany commit do wybrania (podczas rebazowania). Oznacza to, że commit zostanie zachowany po kontynuacji rebazowania. |
| `` d `` | Usuń | Usuń wybrany commit. To usunie commit z gałęzi za pomocą przebazowania. Jeśli commit wprowadza zmiany, od których zależą późniejsze commity, być może będziesz musiał rozwiązać konflikty scalania. |
| `` e `` | Edytuj (rozpocznij interaktywne przebazowanie) | Edytuj wybrany commit. Użyj tego, aby rozpocząć interaktywne przebazowanie od wybranego commita. Podczas trwania przebazowania, to oznaczy wybrany commit do edycji, co oznacza, że po kontynuacji przebazowania, przebazowanie zostanie wstrzymane na wybranym commicie, aby umożliwić wprowadzenie zmian. |
| `` i `` | Rozpocznij interaktywne przebazowanie | Rozpocznij interaktywne przebazowanie dla commitów na twojej gałęzi. To będzie zawierać wszystkie commity od HEAD do pierwszego commita scalenia lub commita głównej gałęzi.<br>Jeśli zamiast tego chcesz rozpocząć interaktywne przebazowanie od wybranego commita, naciśnij `e`. |
| `` p `` | Wybierz | Oznacz wybrany commit do wybrania (podczas przebazowania). Oznacza to, że commit zostanie zachowany po kontynuacji przebazowania. |
| `` F `` | Utwórz commit fixup | Utwórz commit 'fixup!' dla wybranego commita. Później możesz nacisnąć `S` na tym samym commicie, aby zastosować wszystkie powyższe commity fixup. |
| `` S `` | Zastosuj commity fixup | Scal wszystkie commity 'fixup!', albo powyżej wybranego commita, albo wszystkie w bieżącej gałęzi (autosquash). |
| `` B `` | Oznacz jako bazowy commit dla rebase | Wybierz bazowy commit dla następnego rebase. Kiedy robisz rebase na branch, tylko commity powyżej bazowego commita zostaną przeniesione. Używa to polecenia `git rebase --onto`. |
| `` A `` | Popraw | Popraw commit ze zmianami zatwierdzonymi. Jeśli wybrany commit jest commit HEAD, to wykona `git commit --amend`. W przeciwnym razie commit zostanie poprawiony za pomocą rebazowania. |
| `` B `` | Oznacz jako bazowy commit dla przebazowania | Wybierz bazowy commit dla następnego przebazowania. Kiedy robisz przebazowanie na gałąź, tylko commity powyżej bazowego commita zostaną przeniesione. Używa to polecenia `git rebase --onto`. |
| `` A `` | Popraw | Popraw commit ze zmianami zatwierdzonymi. Jeśli wybrany commit jest commit HEAD, to wykona `git commit --amend`. W przeciwnym razie commit zostanie poprawiony za pomocą przebazowania. |
| `` a `` | Popraw atrybut commita | Ustaw/Resetuj autora commita lub ustaw współautora. |
| `` t `` | Cofnij | Utwórz commit cofający dla wybranego commita, który stosuje zmiany wybranego commita w odwrotnej kolejności. |
| `` T `` | Otaguj commit | Utwórz nowy tag wskazujący na wybrany commit. Zostaniesz poproszony o wprowadzenie nazwy tagu i opcjonalnego opisu. |
| `` <c-l> `` | Zobacz opcje logów | Zobacz opcje dla logów commitów, np. zmiana kolejności sortowania, ukrywanie grafu gita, pokazywanie całego grafu gita. |
| `` <ctrl+l> `` | Zobacz opcje logów | Zobacz opcje dla logów commitów, np. zmiana kolejności sortowania, ukrywanie grafu gita, pokazywanie całego grafu gita. |
| `` G `` | Otwórz żądanie ściągnięcia w przeglądarce | |
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
| `` <left>, h `` | Idź do poprzedniego fragmentu | |
| `` <right>, l `` | Idź do następnego fragmentu | |
| `` v `` | Przełącz zaznaczenie zakresu | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Kopiuj zaznaczony tekst do schowka | |
| `` <ctrl+o> `` | Kopiuj zaznaczony tekst do schowka | |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
| `` e `` | Edytuj plik | Otwórz plik w zewnętrznym edytorze. |
| `` <space> `` | Przełącz linie w łatce | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` o `` | Utwórz żądanie ściągnięcia | |
| `` O `` | Zobacz opcje tworzenia pull requesta | |
| `` c `` | Przełącz według nazwy | Przełącz według nazwy. W polu wprowadzania możesz wpisać '-' aby przełączyć się na ostatnią gałąź. |
| `` - `` | Checkout previous branch | |
| `` - `` | Przełącz na poprzednią gałąź | |
| `` F `` | Wymuś przełączenie | Wymuś przełączenie wybranej gałęzi. To spowoduje odrzucenie wszystkich lokalnych zmian w drzewie roboczym przed przełączeniem na wybraną gałąź. |
| `` d `` | Odrzuć | Gdy zaznaczona jest niezatwierdzona zmiana, odrzuć ją używając `git reset`. Gdy zaznaczona jest zatwierdzona zmiana, cofnij zatwierdzenie. |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
@@ -216,7 +239,7 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` c `` | Commit | Zatwierdź zmiany zatwierdzone. |
| `` w `` | Zatwierdź zmiany bez hooka pre-commit | |
| `` C `` | Zatwierdź zmiany używając edytora git | |
| `` <c-f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
## Panel potwierdzenia
@@ -225,21 +248,21 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` <ctrl+b> `` | Filtruj pliki według statusu | |
| `` y `` | Kopiuj do schowka | |
| `` c `` | Commit | Zatwierdź zmiany zatwierdzone. |
| `` w `` | Zatwierdź zmiany bez hooka pre-commit | |
| `` A `` | Popraw ostatni commit | |
| `` C `` | Zatwierdź zmiany używając edytora git | |
| `` <c-f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edytuj | Otwórz plik w zewnętrznym edytorze. |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
| `` i `` | Ignoruj lub wyklucz plik | |
@@ -252,25 +275,25 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` g `` | Pokaż opcje resetowania do upstream | |
| `` D `` | Reset | Wyświetl opcje resetu dla drzewa roboczego (np. zniszczenie drzewa roboczego). |
| `` ` `` | Przełącz widok drzewa plików | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` f `` | Pobierz | Pobierz zmiany ze zdalnego serwera. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
| `` / `` | Filtruj bieżący widok po tekście | |
## Pliki commita
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Kopiuj ścieżkę do schowka | |
| `` <ctrl+o> `` | Kopiuj ścieżkę do schowka | |
| `` y `` | Kopiuj do schowka | |
| `` c `` | Przełącz | Przełącz plik. Zastępuje plik w twoim drzewie roboczym wersją z wybranego commita. |
| `` d `` | Usuń | Odrzuć zmiany w tym pliku z tego commita. Uruchamia interaktywny rebase w tle, więc możesz otrzymać konflikt scalania, jeśli późniejszy commit również zmienia ten plik. |
| `` d `` | Odrzuć | Odrzuć zmiany w tym pliku z tego commita. Uruchamia interaktywne przebazowanie w tle, więc możesz otrzymać konflikt scalania, jeśli późniejszy commit również zmienia ten plik. |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
| `` e `` | Edytuj | Otwórz plik w zewnętrznym edytorze. |
| `` <space> `` | Przełącz plik włączony w łatkę | Przełącz, czy plik jest włączony w niestandardową łatkę. Zobacz https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Przełącz wszystkie pliki | Dodaj/usuń wszystkie pliki commita do niestandardowej łatki. Zobacz https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Wejdź do pliku / Przełącz zwiń katalog | Jeśli plik jest wybrany, wejdź do pliku, aby móc dodawać/usuwać poszczególne linie do niestandardowej łatki. Jeśli wybrany jest katalog, przełącz katalog. |
@@ -278,7 +301,7 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
| `` / `` | Filtruj bieżący widok po tekście | |
## Podsumowanie commita
@@ -287,26 +310,6 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
@@ -315,48 +318,48 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` g `` | Wyciągnij | Zastosuj wpis schowka do katalogu roboczego i usuń wpis schowka. |
| `` d `` | Usuń | Usuń wpis schowka z listy schowka. |
| `` n `` | Nowa gałąź | Utwórz nową gałąź z wybranego wpisu schowka. Działa poprzez przełączenie git na commit, na którym wpis schowka został utworzony, tworzenie nowej gałęzi z tego commita, a następnie zastosowanie wpisu schowka do nowej gałęzi jako dodatkowego commita. |
| `` w `` | Nowe drzewo pracy | |
| `` r `` | Zmień nazwę schowka | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | Wyświetl pliki | |
| `` w `` | Zobacz opcje drzewa pracy | |
| `` / `` | Filtruj bieżący widok po tekście | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Otwórz plik konfiguracyjny | Otwórz plik w domyślnej aplikacji. |
| `` e `` | Edytuj plik konfiguracyjny | Otwórz plik w zewnętrznym edytorze. |
| `` u `` | Sprawdź aktualizacje | |
| `` <enter> `` | Przełącz na ostatnie repozytorium | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
# Lazygit Keybindings
_Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
# Lazygit Atalhos do teclado
## Combinações globais de teclas
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-r> `` | Mudar para um repositório recente | |
| `` <pgup> (fn+up/shift+k) `` | Rolar janela principal para cima | |
| `` <pgdown> (fn+down/shift+j) `` | Rolar a janela principal para baixo | |
| `` <ctrl+r> `` | Mudar para um repositório recente | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Rolar janela principal para cima | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Rolar a janela principal para baixo | |
| `` @ `` | View command log options | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Empurre (Push) | Faça push do branch atual para o seu branch upstream. Se nenhum upstream estiver configurado, você será solicitado a configurar um branch a montante. |
| `` p `` | Puxar (Pull) | Puxe alterações do controle remoto para o ramo atual. Se nenhum upstream estiver configurado, será solicitado configurar um ramo a montante. |
@@ -19,20 +17,21 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Executar comando da shell | Traga um prompt onde você pode digitar um comando shell para executar. |
| `` <c-p> `` | Ver opções de patch personalizadas | |
| `` <ctrl+p> `` | Ver opções de patch personalizadas | |
| `` m `` | Ver opções de mesclar/rebase | Ver opções para abortar/continuar/pular o merge/rebase atual. |
| `` R `` | Atualizar | Atualize o estado do git (ou seja, execute `git status`, `git branch`, etc em segundo plano para atualizar o conteúdo de painéis). Isso não executa `git fetch`. |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` + `` | Modo de tela seguinte (normal/metade/tela cheia) | |
| `` _ `` | Modo de tela anterior | |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Cancelar | |
| `` ? `` | Open keybindings menu | |
| `` <c-s> `` | View filter options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | Sair | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` ? `` | Abrir o menu de atalhos do teclado | |
| `` <ctrl+s> `` | Ver opções de filtro | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Sair | |
| `` <ctrl+z> `` | Suspender a aplicação | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Editar arquivo de configuração | Abrir arquivo no editor externo. |
| `` z `` | Desfazer | O reflog será usado para determinar qual comando git para executar para desfazer o último comando git. Isto não inclui mudanças na árvore de trabalho; apenas compromissos são tidos em consideração. |
| `` Z `` | Refazer | O reflog será usado para determinar qual comando git para executar para refazer o último comando git. Isto não inclui mudanças na árvore de trabalho; apenas compromissos são tidos em consideração. |
@@ -40,32 +39,32 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` , `` | Previous page | |
| `` . `` | Next page | |
| `` < (<home>) `` | Scroll to top | |
| `` > (<end>) `` | Scroll to bottom | |
| `` , `` | Aba anterior | |
| `` . `` | Próxima aba | |
| `` <, <home> `` | Voltar ao topo | |
| `` >, <end> `` | Ir para o final | |
| `` v `` | Toggle range select | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` / `` | Search the current view by text | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Pesquisar na visualização atual por texto | |
| `` H `` | Rolar à esquerda | |
| `` L `` | Scroll para a direita | |
| `` ] `` | Next tab | |
| `` [ `` | Previous tab | |
| `` ] `` | Próxima aba | |
| `` [ `` | Aba anterior | |
## Arquivos
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy path to clipboard | |
| `` <ctrl+o> `` | Copiar caminho para área de transferência | |
| `` <space> `` | Etapa | Alternar para staging para o arquivo selecionado. |
| `` <c-b> `` | Filtrar arquivos por status | |
| `` <ctrl+b> `` | Filtrar arquivos por status | |
| `` y `` | Copy to clipboard | |
| `` c `` | Commit | Submeter mudanças em staging |
| `` w `` | Fazer commit de alterações sem pré-commit | |
| `` A `` | Alterar último commit | |
| `` C `` | Enviar alteração usando um editor Git | |
| `` <c-f> `` | Encontrar commit da base para consertar | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Encontrar commit da base para corrigir | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Editar | Abrir arquivo no editor externo. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` i `` | Ignore or exclude file | |
@@ -78,26 +77,28 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | View upstream reset options | |
| `` D `` | Restaurar | Opções de redefinição de exibição para árvore de trabalho (por exemplo, nukando a árvore de trabalho). |
| `` ` `` | Alternar exibição de árvore de arquivo | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` o `` | Create pull request | |
| `` w `` | Nova árvore de trabalho | |
| `` o `` | Criar solicitação de pull | |
| `` O `` | View create pull request options | |
| `` <c-y> `` | Copiar URL do pull request para área de transferência | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | Copiar URL do pull request para área de transferência | |
| `` c `` | Checar por nome | Checar por nome. Na caixa de entrada você pode inserir '-' para trocar para a última branch |
| `` - `` | Checkout da branch anterior | |
| `` F `` | Forçar checagem | Forçar checagem da branch selecionada. Isso irá descartar todas as mudanças no seu diretório de trabalho antes cheque a branch selecionada |
@@ -105,65 +106,65 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` r `` | Refazer | Refazer a branch checada na branch selecionada |
| `` M `` | Mesclar | Ver opções para mesclar o item selecionado no branch atual (mesclar regularmente, mesclar squash) |
| `` f `` | Avanço rápido | Encaminhamento rápido de branch selecionada a partir do upstream. |
| `` T `` | New tag | |
| `` T `` | Nova etiqueta | |
| `` s `` | Sort order | |
| `` g `` | Restaurar | |
| `` R `` | Rename branch | |
| `` R `` | Renomear branch | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` / `` | Filtrar a visualização atual por texto | |
## Commit arquivos
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy path to clipboard | |
| `` <ctrl+o> `` | Copiar caminho para área de transferência | |
| `` y `` | Copy to clipboard | |
| `` c `` | Verificar | Arquivo de check-out. Isso substitui o arquivo em sua árvore de trabalho com a versão do commit selecionado. |
| `` d `` | Remover | Descartar as alterações desse commit para este arquivo. Isso executa uma rebase interativa em segundo plano, então você pode ter um conflito de merge se um commit posterior também alterar este arquivo. |
| `` d `` | Descartar | Descartar as alterações desse commit para este arquivo. Isso executa uma rebase interativa em segundo plano, então você pode ter um conflito de merge se um commit posterior também alterar este arquivo. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` e `` | Editar | Abrir arquivo no editor externo. |
| `` <space> `` | Alternar entre o arquivo incluído no patch | Alternar se o arquivo está incluído no patch personalizado. Veja https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Alternar todos os arquivos | Adicionar/remover todos os arquivos de commit para atualização personalizada. Consulte https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Insira o arquivo / Alternar diretório recolhido | Se um arquivo estiver selecionado, insira o arquivo para que você possa adicionar/remover linhas individuais no patch personalizado. Se um diretório for selecionado, ative o diretório. |
| `` ` `` | Alternar exibição de árvore de arquivo | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Recolher todos os arquivos | Recolher todos os diretórios na árvore de arquivos |
| `` = `` | Expandir todos os arquivos | Expandir todos os diretórios na árvore do arquivo |
| `` 0 `` | Focus main view | |
| `` / `` | Search the current view by text | |
| `` 0 `` | Focar visualização principal | |
| `` / `` | Filtrar a visualização atual por texto | |
| `` s `` | Squash | Squash o commit selecionado no commit abaixo dele. A mensagem do commit selecionado será anexada ao commit abaixo dele. |
| `` f `` | Fixup | Faça o commit selecionado no commit abaixo dele. Semelhante para o squash, mas a mensagem do commit selecionado será descartada. |
| `` f `` | Corrigir | Faça o commit selecionado no commit abaixo dele. Semelhante para o squash, mas a mensagem do commit selecionado será descartada. |
| `` c `` | Configurar mensagem de correção | Defina a opção de mensagem para o commit de correção. A opção -C significa usar a mensagem deste commit em vez da mensagem do commit alvo. |
| `` r `` | Reword | Repetir a mensagem de submissão selecionada. |
| `` R `` | Republicar com o editor | |
| `` d `` | Descartar | Solte o commit selecionado. Isso irá remover o commit do branch através de uma rebase. Se o commit faz com que as alterações em commits posteriores dependem, você pode precisar resolver conflitos de merge. |
@@ -172,52 +173,45 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` p `` | Escolher | Marque o commit selecionado para ser escolhido (quando meados da base). Isso significa que o commit será mantido ao continuar o rebase. |
| `` F `` | Criar commit de correção | Crie o commit 'correção!' para o commit selecionado. Mais tarde, você pode pressionar `S` neste mesmo commit para aplicar todas os commits de correção acima. |
| `` S `` | Aplicar commits de correções | Aplicar Squash all 'correção!', seja acima do commit selecionado, ou tudo no branch atual (autosquash). |
| `` <c-j> `` | Mover commit um para baixo | |
| `` <c-k> `` | Mover o commit um para cima | |
| `` <ctrl+j>, <alt+down> `` | Mover commit um para baixo | |
| `` <ctrl+k>, <alt+up> `` | Mover o commit um para cima | |
| `` V `` | Colar (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Modificar | Alterar o commit com mudanças em sted. Se o commit selecionado for o commit HEAD, ele executará o `git commit --amend`. Caso contrário, o compromisso será alterado por meio de uma base de apoio. |
| `` a `` | Alterar atributo de commit | Definir/Redefinir autor de submissão ou co-autor definido. |
| `` t `` | Reverter | Crie um commit reverter para o commit selecionado, que aplica as alterações do commit selecionado em reverso. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` T `` | Etiquetar commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <ctrl+l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Verificar | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` o `` | Abrir commit no navegador | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` g `` | Restaurar | Ver opções de redefinição (soft/mixed/hard) para redefinir para o item selecionado. |
| `` C `` | Copiar (cherry-pick) | Marcar commit como copiado. Então, dentro da visualização local de commits, você pode pressionar `V` para colar (cherry-pick) o(s) commit(s) copiado(s) em seu branch de check-out. A qualquer momento você pode pressionar `<esc>` para cancelar a seleção. |
| `` d `` | Descartar | Quando a mudança não desejada for selecionada, descarte a mudança usando `git reset`. Quando a mudança em fase é selecionada, despare a mudança. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
@@ -263,19 +257,27 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` c `` | Commit | Submeter mudanças em staging |
| `` w `` | Fazer commit de alterações sem pré-commit | |
| `` C `` | Enviar alteração usando um editor Git | |
| `` <c-f> `` | Encontrar commit da base para consertar | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Search the current view by text | |
| `` <ctrl+f> `` | Encontrar commit da base para corrigir | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Pesquisar na visualização atual por texto | |
## Painel de confirmação
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | Confirmar | |
| `` <esc> `` | Fechar/Cancelar | |
| `` <ctrl+o> `` | Copy to clipboard | |
## Painel principal (mesclagem)
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | Escolha o local | |
| `` b `` | Pegar todos os pedaços | |
| `` <up> `` | Trecho anterior | |
| `` <down> `` | Próximo trecho | |
| `` <left> `` | Conflito anterior | |
| `` <right> `` | Próximo conflito | |
| `` b `` | Pick both hunks | |
| `` <up>, k `` | Trecho anterior | |
| `` <down>, j `` | Próximo trecho | |
| `` <left>, h `` | Conflito anterior | |
| `` <right>, l `` | Próximo conflito | |
| `` z `` | Desfazer | Desfazer resolução de conflitos de última mesclagem. |
| `` e `` | Editar arquivo | Abrir arquivo no editor externo. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
@@ -286,36 +288,37 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | Ir para o local anterior | |
| `` <right> `` | Ir para o próximo trecho | |
| `` <left>, h `` | Ir para o local anterior | |
| `` <right>, l `` | Ir para o próximo trecho | |
| `` v `` | Toggle range select | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Copy selected text to clipboard | |
| `` a `` | Toggle hunk selection | Ativa/desativa modo linha por linha vs. modo de seleção por partes. |
| `` <ctrl+o> `` | Copiar texto selecionado para área de transferência | |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` e `` | Editar arquivo | Abrir arquivo no editor externo. |
| `` <space> `` | Alternar linhas no caminho | |
| `` d `` | Remover linhas do commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Sair do construtor de patch personalizado | |
| `` / `` | Search the current view by text | |
| `` / `` | Pesquisar na visualização atual por texto | |
| `` <space> `` | Verificar | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` o `` | Abrir commit no navegador | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` g `` | Restaurar | Ver opções de redefinição (soft/mixed/hard) para redefinir para o item selecionado. |
| `` C `` | Copiar (cherry-pick) | Marcar commit como copiado. Então, dentro da visualização local de commits, você pode pressionar `V` para colar (cherry-pick) o(s) commit(s) copiado(s) em seu branch de check-out. A qualquer momento você pode pressionar `<esc>` para cancelar a seleção. |
| `` / `` | Filtrar a visualização atual por texto | |
## Remotes
@@ -327,7 +330,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` e `` | Editar | Edit the selected remote's name or URL. |
| `` f `` | Buscar | Fetch updates from the remote repository. This retrieves new commits and branches without merging them into your local branches. |
| `` F `` | Add fork remote | Quickly add a fork remote by replacing the owner in the origin URL and optionally check out a branch from new remote. |
| `` / `` | Filter the current view by text | |
| `` / `` | Filtrar a visualização atual por texto | |
## Secundário
@@ -335,7 +338,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` <tab> `` | Mudar de visão | Alternar para outra visão (staged/não processadas alterações). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | Search the current view by text | |
| `` / `` | Pesquisar na visualização atual por texto | |
## Stash
@@ -345,56 +348,56 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Pop | Aplique a entrada de stash no seu diretório de trabalho e remova a entrada de stash. |
| `` d `` | Descartar | Remova a entrada do stash da lista de armazenamento. |
| `` n `` | Nova branch | Criar um novo ramo a partir da entrada de lixo selecionada. Isso funciona verificando o commit do qual a entrada de lixo foi criada, criar um novo branch a partir desse commit e, em seguida, aplicar a entrada de lixo ao novo branch como um commit adicional. |
| `` r `` | Renomear o stasj | |
| `` 0 `` | Focus main view | |
| `` w `` | Nova árvore de trabalho | |
| `` r `` | Renomear o stash | |
| `` 0 `` | Focar visualização principal | |
| `` <enter> `` | Ver arquivos | |
| `` w `` | View worktree options | |
| `` / `` | Filter the current view by text | |
| `` / `` | Filtrar a visualização atual por texto | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Abrir o ficheiro de config | Abrir arquivo no aplicativo padrão. |
| `` e `` | Editar arquivo de configuração | Abrir arquivo no editor externo. |
| `` u `` | Verificar atualização | |
| `` <enter> `` | Mudar para um repositório recente | |
| `` a `` | Mostrar/ciclo todos os logs de filiais | |
| `` 0 `` | Focus main view | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Verificar | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` o `` | Abrir commit no navegador | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` g `` | Restaurar | Ver opções de redefinição (soft/mixed/hard) para redefinir para o item selecionado. |
| `` C `` | Copiar (cherry-pick) | Marcar commit como copiado. Então, dentro da visualização local de commits, você pode pressionar `V` para colar (cherry-pick) o(s) commit(s) copiado(s) em seu branch de check-out. A qualquer momento você pode pressionar `<esc>` para cancelar a seleção. |
| `` / `` | Pesquisar na visualização atual por texto | |
## Submodules
## Submódulos
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy submodule name to clipboard | |
| `` <ctrl+o> `` | Copiar o nome do submódulo para área de transferência | |
| `` <enter> `` | Enter | Enter submodule. After entering the submodule, you can press `<esc>` to escape back to the parent repo. |
| `` d `` | Remover | Remove the selected submodule and its corresponding directory. |
| `` u `` | Update | Update selected submodule. |
| `` n `` | New submodule | |
| `` e `` | Update submodule URL | |
| `` i `` | Initialize | Initialize the selected submodule to prepare for fetching. You probably want to follow this up by invoking the 'update' action to fetch the submodule. |
| `` d `` | Remover | Remova o submódulo selecionado e o diretório correspondente. |
| `` i `` | Inicializar | Initialize the selected submodule to prepare for fetching. You probably want to follow this up by invoking the 'update' action to fetch the submodule. |
| `` b `` | View bulk submodule options | |
| `` / `` | Filter the current view by text | |
| `` / `` | Filtrar a visualização atual por texto | |
## Sumário do commit
@@ -403,12 +406,12 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <enter> `` | Confirmar | |
| `` <esc> `` | Fechar | |
## Worktrees
## Árvores de trabalho
| Key | Action | Info |
|-----|--------|-------------|
| `` n `` | New worktree | |
| `` <space> `` | Switch | Switch to the selected worktree. |
| `` n `` | Nova árvore de trabalho | |
| `` <space> `` | Switch | Mudar para a árvore de trabalho selecionada. |
| `` o `` | Abrir no editor | |
| `` d `` | Remover | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
| `` / `` | Filter the current view by text | |
| `` / `` | Filtrar a visualização atual por texto | |
| `` @ `` | Открыть меню журнала команд | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Отправить изменения | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | Получить и слить изменения | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
@@ -19,20 +17,21 @@ _Связки клавиш_
| `` } `` | Увеличить размер контекста, отображаемого вокруг изменений в просмотрщике сравнении | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Уменьшите размер контекста, отображаемого вокруг изменений в просмотрщике сравнении | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Просмотреть параметры слияния/перебазирования | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | Обновить | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | Следующий режим экрана (нормальный/полуэкранный/полноэкранный) | |
| `` _ `` | Предыдущий режим экрана | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Отменить | |
| `` ? `` | Открыть меню | |
| `` <c-s> `` | Просмотреть параметры фильтрации по пути | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | Открыть меню сравнении | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | Открыть меню сравнении | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | Выйти | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | Переключить отображение изменении пробелов в просмотрщике сравнении | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+s> `` | Просмотреть параметры фильтрации по пути | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Открыть меню сравнении | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Выйти | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Переключить отображение изменении пробелов в просмотрщике сравнении | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Редактировать файл конфигурации | Open file in external editor. |
| `` z `` | Отменить (через reflog) (экспериментальный) | Журнал ссылок (reflog) будет использоваться для определения того, какую команду git запустить, чтобы отменить последнюю команду git. Сюда не входят изменения в рабочем дереве; учитываются только коммиты. |
| `` Z `` | Повторить (через reflog) (экспериментальный) | Журнал ссылок (reflog) будет использоваться для определения того, какую команду git нужно запустить, чтобы повторить последнюю команду git. Сюда не входят изменения в рабочем дереве; учитываются только коммиты. |
@@ -42,11 +41,11 @@ _Связки клавиш_
|-----|--------|-------------|
| `` , `` | Предыдущая страница | |
| `` . `` | Следующая страница | |
| `` < (<home>) `` | Пролистать наверх | |
| `` > (<end>) `` | Прокрутить вниз | |
| `` <, <home> `` | Пролистать наверх | |
| `` >, <end> `` | Прокрутить вниз | |
| `` v `` | Переключить выборку перетаскивания | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Найти | |
| `` H `` | Прокрутить влево | |
| `` L `` | Прокрутить вправо | |
@@ -82,11 +81,11 @@ _Связки клавиш_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | Выбрать предыдущую часть | |
| `` <right> `` | Выбрать следующую часть | |
| `` <left>, h `` | Выбрать предыдущую часть | |
| `` <right>, l `` | Выбрать следующую часть | |
| `` v `` | Переключить выборку перетаскивания | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Скопировать выделенный текст в буфер обмена | |
| `` <ctrl+o> `` | Скопировать выделенный текст в буфер обмена | |
| `` <space> `` | Переключить индекс | Переключить строку в проиндексированные / непроиндексированные |
| `` d `` | Отменить изменение (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | Открыть файл | Open file in default application. |
@@ -97,15 +96,15 @@ _Связки клавиш_
| `` c `` | Сохранить изменения | Commit staged changes. |
| `` w `` | Закоммитить изменения без предварительного хука коммита | |
| `` C `` | Сохранить изменения с помощью редактора git | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Выйти из сборщика пользовательских патчей | |
| `` / `` | Найти | |
@@ -145,31 +145,32 @@ _Связки клавиш_
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Скопировать hash коммита в буфер обмена | |
| `` n `` | Создать новую ветку с этого коммита | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` s `` | Объединить коммиты (Squash) | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Объединить несколько коммитов в один отбросив сообщение коммита (Fixup) | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Перефразировать коммит | Reword the selected commit's message. |
| `` R `` | Переписать коммит с помощью редактора | |
| `` d `` | Удалить коммит | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
@@ -178,41 +179,44 @@ _Связки клавиш_
| `` p `` | Pick | Выбрать коммит (в середине перебазирования) |
| `` F `` | Создать fixup коммит | Создать fixup коммит для этого коммита |
| `` S `` | Apply fixup commits | Объединить все 'fixup!' коммиты выше в выбранный коммит (автосохранение) |
| `` <c-j> `` | Переместить коммит вниз на один | |
| `` <c-k> `` | Переместить коммит вверх на один | |
| `` <ctrl+j>, <alt+down> `` | Переместить коммит вниз на один | |
| `` <ctrl+k>, <alt+up> `` | Переместить коммит вверх на один | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Править последний коммит с проиндексированными изменениями |
| `` a `` | Установить/убрать автора коммита | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Пометить коммит тегом | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | Открыть меню журнала | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <ctrl+l> `` | Открыть меню журнала | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Переключить | Checkout the selected commit as a detached HEAD. |
| `` n `` | Создать новую ветку с этого коммита | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` o `` | Создать запрос на принятие изменений | |
| `` O `` | Создать параметры запроса принятие изменений | |
| `` <c-y> `` | Скопировать URL запроса на принятие изменений в буфер обмена | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | Скопировать URL запроса на принятие изменений в буфер обмена | |
| `` c `` | Переключить по названию | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | Принудительное переключение | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
@@ -225,10 +229,9 @@ _Связки клавиш_
| `` g `` | Просмотреть параметры сброса | |
| `` R `` | Переименовать ветку | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` n `` | Создать новую ветку с этого коммита | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <space> `` | Переключить файлы включённые в патч | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Переключить все файлы, включённые в патч | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Введите файл, чтобы добавить выбранные строки в патч (или свернуть каталог переключения) | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
@@ -306,52 +309,52 @@ _Связки клавиш_
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Найти | |
| `` / `` | Filter the current view by text | |
## Статус
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Открыть файл конфигурации | Open file in default application. |
| `` e `` | Редактировать файл конфигурации | Open file in external editor. |
| `` u `` | Проверить обновления | |
| `` <enter> `` | Переключиться на последний репозиторий | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` 0 `` | Focus main view | |
## Теги
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy tag to clipboard | |
| `` <ctrl+o> `` | Copy tag to clipboard | |
| `` <space> `` | Переключить | Checkout the selected tag as a detached HEAD. |
| `` n `` | Создать тег | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
| `` w `` | New worktree | |
| `` d `` | Delete | View delete options for local/remote tag. |
| `` P `` | Отправить тег | Push the selected tag to a remote. You'll be prompted to select a remote. |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` <c-o> `` | Скопировать название ветки в буфер обмена | |
| `` <ctrl+o> `` | Скопировать название ветки в буфер обмена | |
| `` <space> `` | Переключить | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
| `` n `` | Новая ветка | |
| `` w `` | New worktree | |
| `` M `` | Слияние с текущей переключённой веткой | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` r `` | Перебазировать переключённую ветку на эту ветку | Rebase the checked-out branch onto the selected branch. |
| `` d `` | Delete | Delete the remote branch from the remote. |
| `` u `` | Set as upstream | Установить как upstream-ветку переключённую ветку |
| `` s `` | Порядок сортировки | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` c `` | Сохранить изменения | Commit staged changes. |
| `` w `` | Закоммитить изменения без предварительного хука коммита | |
| `` A `` | Правка последнего коммита | |
| `` C `` | Сохранить изменения с помощью редактора git | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | Открыть файл | Open file in default application. |
| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | Переключить вид дерева файлов | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` f `` | Получить изменения | Fetch changes from remote. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Найти | |
| `` / `` | Filter the current view by text | |
## Хранилище
@@ -407,8 +410,8 @@ _Связки клавиш_
| `` g `` | Применить припрятанные изменения и тут же удалить их из хранилища | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Удалить припрятанные изменения из хранилища | Remove the stash entry from the stash list. |
| `` n `` | Новая ветка | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` P `` | 推送 | 推送当前分支到它的上游。如果上游未配置，您可以在弹窗中配置上游分支。 |
| `` p `` | 拉取 | 从当前分支的远程分支获取改动。如果上游未配置，您可以在弹窗中配置上游分支。 |
| `` ) `` | 提高重命名相似度阈值 | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | 降低重命名相似度阈值 | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | 扩大差异视图中显示的上下文范围 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | 缩小差异视图中显示的上下文范围 | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` <c-w> `` | 切换是否在差异视图中显示空白字符差异 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` y `` | 复制提交属性到剪贴板 | 复制提交属性到剪贴板(如hash、URL、diff、消息、作者)。 |
| `` o `` | 在浏览器中打开提交 | |
| `` n `` | 从提交创建新分支 | |
| `` N `` | 移动提交至新分支 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` y `` | 复制提交属性到剪贴板 | 复制提交属性到剪贴板(如hash、URL、diff、消息、作者)。 |
| `` o `` | 在浏览器中打开提交 | |
| `` n `` | 从提交创建新分支 | |
| `` N `` | 移动提交至新分支 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | 移动提交至新分支 | 创建一个新分支，并将当前分支未推送的提交移动到该分支。如果您打算开始新工作但忘记先创建新分支，这会很有用。<br><br>请注意，此操作忽略选择，新分支总是从主分支创建或堆叠在当前分支之上（您可以选择哪种方式）。 |
| `` y `` | 复制提交属性到剪贴板 | 复制提交属性到剪贴板(如hash、URL、diff、消息、作者)。 |
| `` o `` | 在浏览器中打开提交 | |
| `` n `` | 从提交创建新分支 | |
| `` N `` | 移动提交至新分支 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | 移动提交至新分支 | 创建一个新分支，并将当前分支未推送的提交移动到该分支。如果您打算开始新工作但忘记先创建新分支，这会很有用。<br><br>请注意，此操作忽略选择，新分支总是从主分支创建或堆叠在当前分支之上（您可以选择哪种方式）。 |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` <ctrl+t> `` | 使用外部差异比较工具(git difftool) | |
| `` M `` | 查看合并冲突选项 | 查看用于解决合并冲突的选项。 |
| `` f `` | 抓取 | 从远程获取变更 |
| `` - `` | 折叠全部文件 | 折叠文件树中的全部目录 |
| `` = `` | 展开全部文件 | 展开文件树中的全部目录 |
| `` 0 `` | 聚焦主视图 | |
| `` / `` | 开始搜索 | |
| `` / `` | 通过文本过滤当前视图 | |
## 本地分支
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | 复制分支名称到剪贴板 | |
| `` <ctrl+o> `` | 复制分支名称到剪贴板 | |
| `` i `` | 显示 git-flow 选项 | |
| `` <space> `` | 检出 | 检出选中的项目 |
| `` n `` | 新分支 | |
| `` N `` | 移动提交至新分支 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | 移动提交至新分支 | 创建一个新分支，并将当前分支未推送的提交移动到该分支。如果您打算开始新工作但忘记先创建新分支，这会很有用。<br><br>请注意，此操作忽略选择，新分支总是从主分支创建或堆叠在当前分支之上（您可以选择哪种方式）。 |
| `` w `` | 新建工作树 | |
| `` o `` | 创建拉取请求 | |
| `` O `` | 创建拉取请求选项 | |
| `` <c-y> `` | 复制拉取请求 URL 到剪贴板 | |
| `` G `` | 在浏览器中打开拉取请求 | |
| `` <ctrl+y> `` | 复制拉取请求 URL 到剪贴板 | |
| `` c `` | 按名称检出 | 按名称检出。在输入框中，您可以输入'-' 来切换到最后一个分支。 |
| `` - `` | 签出上一个分支 | |
| `` F `` | 强制检出 | 强制检出所选分支。这将在检出所选分支之前放弃工作目录中的所有本地更改。 |
| `` d `` | 删除 | 查看本地/远程分支的删除选项 |
| `` r `` | 变基 | 将检出的分支变基到所选的分支上。 |
| `` M `` | 合并到当前检出的分支 | Merge selected branch into currently checked out branch. |
| `` M `` | 合并到当前检出的分支 | 查看将选中项合并到当前分支的选项(正常合并，压缩合并) |
| `` f `` | 从上游快进此分支 | 将当前分支直接移动到远程追踪分支的最新提交 |
| `` T `` | 创建标签 | |
| `` s `` | 排序 | |
| `` g `` | 查看重置选项 | |
| `` R `` | 重命名分支 | |
| `` u `` | 查看上游选项 | 查看与分支上游相关的选项，例如设置/取消设置上游和重置为上游。 |
| `` <c-t> `` | 使用外部差异比较工具(git difftool) | |
| `` <ctrl+t> `` | 使用外部差异比较工具(git difftool) | |
| `` 0 `` | 聚焦主视图 | |
| `` <enter> `` | 查看提交 | |
| `` w `` | 查看工作区选项 | |
| `` / `` | 通过文本过滤当前视图 | |
## 构建补丁中
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | 选择上一个区块 | |
| `` <right> `` | 选择下一个区块 | |
| `` <left>, h `` | 选择上一个区块 | |
| `` <right>, l `` | 选择下一个区块 | |
| `` v `` | 切换拖动选择 | |
| `` a `` | 切换代码块选择 | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 复制选中文本到剪贴板 | |
| `` a `` | 切换代码块选择 | 切换逐行选择与代码块选择模式。 |
| `` <ctrl+o> `` | 复制选中文本到剪贴板 | |
| `` o `` | 打开文件 | 使用默认程序打开该文件 |
| `` e `` | 编辑文件 | 使用外部编辑器打开文件 |
| `` <space> `` | 添加/移除 行到补丁 | |
| `` d `` | 从提交中移除行 | 从本次提交中移除所选行。此操作会在后台运行交互式变基，因此如果后续提交也修改了这些行，您可能会遇到合并冲突。 |
| `` } `` | 增加差異檢視中顯示變更周圍上下文的大小 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | 減小差異檢視中顯示變更周圍上下文的大小 | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` <c-p> `` | 檢視自訂補丁選項 | |
| `` <ctrl+p> `` | 檢視自訂補丁選項 | |
| `` m `` | 查看合併/變基選項 | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | 重新整理 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | 下一個螢幕模式（常規/半螢幕/全螢幕） | |
| `` _ `` | 上一個螢幕模式 | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | 取消 | |
| `` ? `` | 開啟選單 | |
| `` <c-s> `` | 檢視篩選路徑選項 | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | 結束 | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | 切換是否在差異檢視中顯示空格變更 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+s> `` | 檢視篩選路徑選項 | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | 結束 | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | 切換是否在差異檢視中顯示空格變更 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 複製所選文本至剪貼簿 | |
| `` <ctrl+o> `` | 複製所選文本至剪貼簿 | |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` e `` | 編輯檔案 | 使用外部編輯器開啟 |
| `` <space> `` | 向 (或從) 補丁中添加/刪除行 | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 複製所選文本至剪貼簿 | |
| `` <ctrl+o> `` | 複製所選文本至剪貼簿 | |
| `` <space> `` | 切換預存 | 切換現有行的狀態 (已預存/未預存) |
| `` d `` | 刪除變更 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <c-r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <c-t> `` | 開啟外部差異工具 (git difftool) | |
| `` <ctrl+r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` * `` | Select commits of current branch | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | 檢視所選項目的檔案 | |
| `` w `` | 檢視工作目錄選項 | |
| `` / `` | 搜尋 | |
## 子模組
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | 複製子模組名稱到剪貼簿 | |
| `` <ctrl+o> `` | 複製子模組名稱到剪貼簿 | |
| `` <enter> `` | Enter | 進入子模組 |
| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
| `` s `` | 壓縮 (Squash) | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | 修復 (Fixup) | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | 改寫提交 | 改寫選中的提交訊息 |
| `` R `` | 使用編輯器改寫提交 | |
| `` d `` | 刪除提交 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` B `` | 為了變基已標注提交為基準提交 | 請為了下一次變基選擇一項基準提交；此將執行 `git rebase --onto`。 |
| `` A `` | 修改 | 使用已預存的更改修正提交 |
| `` a `` | 設定/重設提交作者 | Set/Reset commit author or set co-author. |
| `` t `` | 還原 | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | 打標籤到提交 | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | 開啟記錄選單 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <ctrl+l> `` | 開啟記錄選單 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` d `` | Remove | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` d `` | 捨棄 | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` e `` | 編輯 | 使用外部編輯器開啟 |
| `` <c-t> `` | 開啟外部差異工具 (git difftool) | |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` <space> `` | 切換檔案是否包含在補丁中 | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | 切換所有檔案是否包含在補丁中 | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | 輸入檔案以將選定的行添加至補丁（或切換目錄折疊） | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
| `` g `` | 還原 | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | 捨棄 | Remove the stash entry from the stash list. |
| `` n `` | 新分支 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <c-r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <c-t> `` | 開啟外部差異工具 (git difftool) | |
| `` <ctrl+r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` * `` | Select commits of current branch | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | 檢視提交 | |
| `` w `` | 檢視工作目錄選項 | |
| `` / `` | 搜尋 | |
## 本地分支
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | 複製分支名稱到剪貼簿 | |
| `` <ctrl+o> `` | 複製分支名稱到剪貼簿 | |
| `` i `` | 顯示 git-flow 選項 | |
| `` <space> `` | 檢出 | 檢出選定的項目。 |
| `` n `` | 新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` o `` | 建立拉取請求 | |
| `` O `` | 建立拉取請求選項 | |
| `` <c-y> `` | 複製拉取請求的 URL 到剪貼板 | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | 複製拉取請求的 URL 到剪貼板 | |
| `` c `` | 根據名稱檢出 | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | 強制檢出 | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` D `` | 重設 | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | 顯示檔案樹狀視圖 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` <c-t> `` | 開啟外部差異工具 (git difftool) | |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` f `` | 擷取 | 同步遠端異動 |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
### Overriding the platform for default keybindings
A few keybindings have different defaults on macOS than on Linux and Windows (e.g. word-wise cursor movement in text inputs uses `alt` on macOS but `ctrl` elsewhere). Lazygit picks these based on the OS it's running on, but you can override that with the `LAZYGIT_KEYBINDING_PLATFORM` environment variable. Set it to `darwin`, `linux`, or `windows`; any other value is ignored and the actual OS is used.
This is useful when running lazygit in a Linux container that you access over ssh from a Mac, where you'd rather use the macOS keybindings.
### Example Keybindings For Colemak Users
```yaml
@@ -1078,9 +1158,11 @@ services:
Where:
-`gitDomain` stands for the domain used by git itself (i.e. the one present on clone URLs), e.g. `git.work.com`
-`provider` is one of `github`, `bitbucket`, `bitbucketServer`, `azuredevops`, `gitlab` or`gitea`
-`provider` is one of `github`, `bitbucket`, `bitbucketServer`, `azuredevops`, `gitlab`,`gitea` or `codeberg`
-`webDomain` is the URL where your git service exposes a web interface and APIs, e.g. `gitservice.work.com`
For the `github` provider, configuring an entry here also enables the pull-request icons in the branches panel for that host (e.g. a GitHub Enterprise Server instance). Lazygit picks up the auth token via the same mechanisms as the `gh` CLI: the `GH_ENTERPRISE_TOKEN` / `GITHUB_ENTERPRISE_TOKEN` environment variables, or `gh auth login --hostname <webDomain>`.
## Predefined commit message prefix
In situations where certain naming pattern is used for branches and commits, pattern can be used to populate commit message with prefix that is parsed from the branch name.
@@ -50,7 +50,7 @@ Custom command keybindings will appear alongside inbuilt keybindings when you vi
For a given custom command, here are the allowed fields:
| _field_ | _description_ | required |
|-----------------|----------------------|-|
| key | The key to trigger the command. Use a single letter or one of the values from [here](https://github.com/jesseduffield/lazygit/blob/master/docs/keybindings/Custom_Keybindings.md). Custom commands without a key specified can be triggered by selecting them from the keybindings (`?`) menu | no |
| key | The key to trigger the command. Use a single key or list of keys, as described in [Custom_Keybindings.md](https://github.com/jesseduffield/lazygit/blob/master/docs/keybindings/Custom_Keybindings.md). Custom commands without a key specified can be triggered by selecting them from the keybindings (`?`) menu | no |
| command | The command to run (using Go template syntax for placeholder values) | yes |
| context | The context in which to listen for the key (see [below](#contexts)) | yes |
| prompts | A list of prompts that will request user input before running the final command | no |
@@ -102,6 +102,7 @@ These fields are applicable to all prompts.
| type | One of 'input', 'confirm', 'menu', 'menuFromCommand' | yes |
| title | The title to display in the popup panel | no |
| key | Used to reference the entered value from within the custom command. E.g. a prompt with `key: 'Branch'` can be referred to as `{{.Form.Branch}}` in the command | yes |
| condition | A Go template expression; if it resolves to empty string or `false`, the prompt is skipped. See [Conditional prompts](#conditional-prompts) | no |
### Input
@@ -192,6 +193,7 @@ The permitted option fields are:
| name | The first part of the label | no |
| description | The second part of the label | no |
| value | the value that will be used in the command | yes |
| key | Keybinding to invoke this menu option without needing to navigate to it. Use a single key or list of keys, as described in [Custom_Keybindings.md](https://github.com/jesseduffield/lazygit/blob/master/docs/keybindings/Custom_Keybindings.md) | no |
If an option has no name the value will be displayed to the user in place of the name, so you're allowed to only include the value like so:
@@ -233,6 +235,34 @@ customCommands:
description:'branch for a release'
```
Here's an example of supplying keybindings for menu options:
```yml
customCommands:
- key:'a'
command:'echo {{.Form.BranchType | quote}}'
context:'commits'
prompts:
- type:'menu'
title:'What kind of branch is it?'
key:'BranchType'
options:
- value:'feature'
name:'feature branch'
description:'branch based off develop'
key:'f'
- value:'hotfix'
name:'hotfix branch'
description:'branch based off main for fast bug fixes'
key:'h'
- value:'release'
name:'release branch'
description:'branch for a release'
key:'r'
```
In this example, pressing 'f', 'h', or 'r' will directly select the corresponding option without needing to navigate to it first.
### Menu-from-command
| _field_ | _description_ | _required_ |
@@ -290,6 +320,41 @@ Here's an example using a command but not specifying anything else: so each line
In this example the 'Branch prefix' menu only appears if the user chose 'With prefix'. Otherwise it is skipped and `.Form.Prefix` defaults to empty string.
## Placeholder values
Your commands can contain placeholder strings using Go's [template syntax](https://jan.newmarch.name/golang/template/chapter-template.html). The template syntax is pretty powerful, letting you do things like conditionals if you want, but for the most part you'll simply want to be accessing the fields on the following objects:
Custom diff renderers are useful for showing a better rendering of a diff than git's builtin raw diff, and using one is strongly recommended (I personally prefer delta myself, but that's a matter of personal preference). There are three types of diff renderers that lazygit supports:
- **stdin filters**, e.g. [delta](#delta) and [diff-so-fancy](#diff-so-fancy). They take git's raw output as stdin and produce something nicer on stdout, and they are hooked up using git's GIT_PAGER mechanism. (These used to be called "custom pagers" in earlier lazygit versions.)
- **external diff programs**, e.g. difftastic; these are called using git's `--ext-diff` flag, and they take over diff generation from git completely rather than post-processing git's output.
- **git's raw output using custom arguments**; mainly useful for `--color-words` (or `--word-diff` if you are color blind).
Diff renderers are configured with the `diffRenderers` array in the `git` section of lazygit's config file; it is an array because you can have multiple entries that you can cycle through with the `|` key. This can be useful if you usually prefer a particular diff renderer, but want to use a different one for certain kinds of diffs.
Fields that are shared by all renderer types:
- **type** The type of diff renderer; choices are `stdinFilter`, `extDiff`, or `rawGit`. `stdinFilter` is the default, because it's the most common one; so you can omit this if you use delta.
- **name** A name that is shown in the status bar toast when cycling renderers; defaults to the first word of the renderer command, but can be useful e.g. to distinguish "delta" from "delta side-by-side" if you have entries for both.
Fields only for `stdinFilter`:
- **command** The command line to use for `GIT_PAGER`.
- **colorArg** whether you want the `--color=always` arg in your `git diff` command. Some diff renderers want it set to `always`, others want it set to `never`. The default is `always`, since that's what most renderers need.
Fields only for `extDiff`:
- **command** The command line to use for the `diff.external` git config. If left empty, it uses the global value of git's `diff.external` config; this can be useful if you also want to use it for diffs on the command line, and it also has the advantage that you can configure it per file type in `.gitattributes`; see https://git-scm.com/docs/gitattributes#_defining_an_external_diff_driver.
You can include the `{{diffContext}}` template variable to pass lazygit's current diff context size (the value controlled by the `{`/`}` keybindings) to the diff tool.
Fields only for `rawGit`:
- **args** The additional arguments to use in the `git diff` or `git show` call (e.g. `--color-words`)
A cool feature of delta is --hyperlinks, which renders clickable links for the line numbers in the left margin, and lazygit supports these. To use them, set the `command:` field to `delta --dark --paging=never --line-numbers --hyperlinks --hyperlinks-file-link-format="lazygit-edit://{path}:{line}"`; this allows you to click on an underlined line number in the diff to jump right to that same line in your editor.
Note that delta's `--navigate` option doesn't work in lazygit, for technical reasons.
## Diff-so-fancy
```yaml
git:
diffRenderers:
- command:diff-so-fancy
```
## ydiff
```yaml
gui:
sidePanelWidth:0.2# gives you more space to show things side-by-side
Lazygit supports custom pagers, [configured](/docs/Config.md) in the config.yml file (which can be opened by pressing `e` in the Status panel).
Support does not extend to Windows users, because we're making use of a package which doesn't have Windows support. However, see [below](#emulating-custom-pagers-on-windows) for a workaround.
Multiple pagers are supported; you can cycle through them with the `|` key. This can be useful if you usually prefer a particular pager, but want to use a different one for certain kinds of diffs.
Pagers are configured with the `pagers` array in the git section; here's an example for a multi-pager setup:
The `colorArg` key is for whether you want the `--color=always` arg in your `git diff` command. Some pagers want it set to `always`, others want it set to `never`. The default is `always`, since that's what most pagers need.
## Delta:
```yaml
git:
pagers:
- pager:delta --dark --paging=never
```
A cool feature of delta is --hyperlinks, which renders clickable links for the line numbers in the left margin, and lazygit supports these. To use them, set the `pager:` config to `delta --dark --paging=never --line-numbers --hyperlinks --hyperlinks-file-link-format="lazygit-edit://{path}:{line}"`; this allows you to click on an underlined line number in the diff to jump right to that same line in your editor.
## Diff-so-fancy
```yaml
git:
pagers:
- pager:diff-so-fancy
```
## ydiff
```yaml
gui:
sidePanelWidth:0.2# gives you more space to show things side-by-side
Be careful with this one, I think the homebrew and pip versions are behind master. I needed to directly download the ydiff script to get the no-pager functionality working.
## Using external diff commands
Some diff tools can't work as a simple pager like the ones above do, because they need access to the entire diff, so just post-processing git's diff is not enough for them. The most notable example is probably [difftastic](https://difftastic.wilfred.me.uk).
These can be used in lazygit by using the `externalDiffCommand` config; in the case of difftastic, that could be
```yaml
git:
pagers:
- externalDiffCommand:difft --color=always
```
The `colorArg` and `pager` options are not used in this case.
You can add whatever extra arguments you prefer for your difftool; for instance
Instead of setting this command in lazygit's `externalDiffCommand` config, you can also tell lazygit to use the external diff command that is configured in git itself (`diff.external`), by using
```yaml
git:
pagers:
- useExternalDiffGitConfig:true
```
This can be useful if you also want to use it for diffs on the command line, and it also has the advantage that you can configure it per file type in `.gitattributes`; see https://git-scm.com/docs/gitattributes#_defining_an_external_diff_driver.
## Emulating custom pagers on Windows
There is a trick to emulate custom pagers on Windows using a Powershell script configured as an external diff command. It's not perfect, but certainly better than nothing. To do this, save the following script as `lazygit-pager.ps1` at a convenient place on your disk:
```pwsh
#!/usr/bin/env pwsh
$old=$args[1].Replace('\','/')
$new=$args[4].Replace('\','/')
$path=$args[0]
gitdiff --no-index--no-ext-diff$old$new
|%{$_.Replace($old,$path).Replace($new,$path)}
|delta--width=$env:LAZYGIT_COLUMNS
```
Use the pager of your choice with the arguments you like in the last line of the script. Personally I wouldn't want to use lazygit anymore without delta's `--hyperlinks --hyperlinks-file-link-format="lazygit-edit://{path}:{line}"` args, see [above](#delta).
The main limitation of this approach compared to a "real" pager is that renames are not displayed correctly; they are shown as if they were modifications of the old file. (This affects only the hunk headers; the diff itself is always correct.)
@@ -2,15 +2,13 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
# Lazygit Keybindings
_Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
## Global keybindings
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-r> `` | Switch to a recent repo | |
| `` <pgup> (fn+up/shift+k) `` | Scroll up main window | |
| `` <pgdown> (fn+down/shift+j) `` | Scroll down main window | |
| `` <ctrl+r> `` | Switch to a recent repo | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Scroll up main window | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Scroll down main window | |
| `` @ `` | View command log options | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Push | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | Pull | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
@@ -19,20 +17,21 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` <c-p> `` | View custom patch options | |
| `` <ctrl+p> `` | View custom patch options | |
| `` m `` | View merge/rebase options | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | Refresh | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Cancel | |
| `` ? `` | Open keybindings menu | |
| `` <c-s> `` | View filter options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | Quit | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+s> `` | View filter options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Quit | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Edit config file | Open file in external editor. |
| `` z `` | Undo | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
@@ -42,11 +41,11 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` , `` | Previous page | |
| `` . `` | Next page | |
| `` < (<home>) `` | Scroll to top | |
| `` > (<end>) `` | Scroll to bottom | |
| `` <, <home> `` | Scroll to top | |
| `` >, <end> `` | Scroll to bottom | |
| `` v `` | Toggle range select | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Search the current view by text | |
| `` H `` | Scroll left | |
| `` L `` | Scroll right | |
@@ -57,13 +56,13 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy path to clipboard | |
| `` <ctrl+o> `` | Copy path to clipboard | |
| `` y `` | Copy to clipboard | |
| `` c `` | Checkout | Checkout file. This replaces the file in your working tree with the version from the selected commit. |
| `` d `` | Remove | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` d `` | Discard | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` o `` | Open file | Open file in default application. |
| `` e `` | Edit | Open file in external editor. |
| `` <space> `` | Toggle file included in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Toggle all files | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Enter file / Toggle directory collapsed | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
@@ -71,7 +70,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Search the current view by text | |
| `` / `` | Filter the current view by text | |
## Commit summary
@@ -84,11 +83,12 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Reword | Reword the selected commit's message. |
| `` R `` | Reword with editor | |
| `` d `` | Drop | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
@@ -97,27 +97,28 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` p `` | Pick | Mark the selected commit to be picked (when mid-rebase). This means that the commit will be retained upon continuing the rebase. |
| `` F `` | Create fixup commit | Create 'fixup!' commit for the selected commit. Later on, you can press `S` on this same commit to apply all above fixup commits. |
| `` S `` | Apply fixup commits | Squash all 'fixup!' commits, either above the selected commit, or all in current branch (autosquash). |
| `` <c-j> `` | Move commit down one | |
| `` <c-k> `` | Move commit up one | |
| `` <ctrl+j>, <alt+down> `` | Move commit down one | |
| `` <ctrl+k>, <alt+up> `` | Move commit up one | |
| `` V `` | Paste (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Amend commit with staged changes. If the selected commit is the HEAD commit, this will perform `git commit --amend`. Otherwise the commit will be amended via a rebase. |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <ctrl+l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` w `` | Commit changes without pre-commit hook | |
| `` A `` | Amend last commit | |
| `` C `` | Commit changes using git editor | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | Open file | Open file in default application. |
| `` i `` | Ignore or exclude file | |
@@ -153,13 +154,13 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | View upstream reset options | |
| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | Toggle file tree view | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` c `` | Checkout by name | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | Force checkout | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
@@ -192,10 +195,9 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Reset | |
| `` R `` | Rename branch | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` <tab> `` | Switch view | Switch to other view (staged/unstaged changes). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | Search the current view by text | |
@@ -228,14 +230,15 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | Go to previous hunk | |
| `` <right> `` | Go to next hunk | |
| `` <left>, h `` | Go to previous hunk | |
| `` <right>, l `` | Go to next hunk | |
| `` v `` | Toggle range select | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Copy selected text to clipboard | |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` o `` | Open file | Open file in default application. |
| `` e `` | Edit file | Open file in external editor. |
| `` <space> `` | Toggle lines in patch | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Exit custom patch builder | |
| `` / `` | Search the current view by text | |
@@ -243,11 +246,11 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | Go to previous hunk | |
| `` <right> `` | Go to next hunk | |
| `` <left>, h `` | Go to previous hunk | |
| `` <right>, l `` | Go to next hunk | |
| `` v `` | Toggle range select | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Copy selected text to clipboard | |
| `` <ctrl+o> `` | Copy selected text to clipboard | |
| `` d `` | Discard | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | Open file | Open file in default application. |
@@ -258,7 +261,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` c `` | Commit | Commit staged changes. |
| `` w `` | Commit changes without pre-commit hook | |
| `` C `` | Commit changes using git editor | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Search the current view by text | |
## Menu
@@ -273,39 +276,39 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
@@ -336,48 +339,48 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Drop | Remove the stash entry from the stash list. |
| `` n `` | New branch | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` w `` | New worktree | |
| `` r `` | Rename stash | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | View files | |
| `` w `` | View worktree options | |
| `` / `` | Filter the current view by text | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Open config file | Open file in default application. |
| `` e `` | Edit config file | Open file in external editor. |
| `` u `` | Check for update | |
| `` <enter> `` | Switch to a recent repo | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Checkout | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Copy (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` } `` | 差分コンテキストサイズを増やす | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | 差分コンテキストサイズを減らす | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` <c-w> `` | 空白表示の切り替え | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+w> `` | 空白表示の切り替え | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` s `` | スカッシュ | 選択したコミットをその下のコミットにスカッシュします。スカッシュとは複数のコミットを1つにまとめる操作です。選択したコミットのメッセージが下のコミットに追加されます。 |
| `` f `` | フィックスアップ | 選択したコミットをその下のコミットにマージします。フィックスアップはスカッシュと似ていますが、選択したコミットのメッセージは破棄され、下のコミットのメッセージのみが保持されます。 |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | メッセージ変更 | 選択したコミットのメッセージを変更します。 |
| `` R `` | エディタでメッセージ変更 | |
| `` d `` | 削除 | 選択したコミットを削除します。これはリベースを通じてブランチからコミットを削除します。コミットが後続のコミットが依存する変更を行っている場合、マージコンフリクトを解決する必要があるかもしれません。 |
| `` y `` | コミット属性をクリップボードにコピー | コミット属性をクリップボードにコピーします（例：ハッシュ、URL、差分、メッセージ、作者）。 |
| `` o `` | ブラウザでコミットを開く | |
| `` n `` | コミットから新しいブランチを作成 | |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` ` `` | ファイルツリービューを切り替え | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` y `` | コミット属性をクリップボードにコピー | コミット属性をクリップボードにコピーします（例：ハッシュ、URL、差分、メッセージ、作者）。 |
| `` o `` | ブラウザでコミットを開く | |
| `` n `` | コミットから新しいブランチを作成 | |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` D `` | リセット | 作業ツリーのリセットオプション（例：作業ツリーの完全破棄）を表示します。 |
| `` ` `` | ファイルツリービューを切り替え | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` a `` | ハンクの選択を切り替える | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 選択したテキストをクリップボードにコピー | |
| `` <ctrl+o> `` | 選択したテキストをクリップボードにコピー | |
| `` o `` | ファイルを開く | デフォルトのアプリケーションでファイルを開きます。 |
| `` e `` | ファイルを編集 | 外部エディタでファイルを開きます。 |
| `` <space> `` | パッチ内の行を切り替え | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` y `` | コミット属性をクリップボードにコピー | コミット属性をクリップボードにコピーします（例：ハッシュ、URL、差分、メッセージ、作者）。 |
| `` o `` | ブラウザでコミットを開く | |
| `` n `` | コミットから新しいブランチを作成 | |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | コミットを新しいブランチに移動 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | 新しいワークツリー | |
| `` o `` | プルリクエストを作成 | |
| `` O `` | プルリクエスト作成オプションを表示 | |
| `` <c-y> `` | プルリクエストURLをクリップボードにコピー | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | プルリクエストURLをクリップボードにコピー | |
| `` c `` | 名前でチェックアウト | 名前でチェックアウトします。入力ボックスに「-」を入力すると、最後のブランチをチェックアウトすることができます。 |
| `` - `` | 直前のブランチにチェックアウト | |
| `` F `` | 強制チェックアウト | 選択したブランチを強制的にチェックアウトします。これにより、選択したブランチをチェックアウトする前にワーキングディレクトリ内のすべてのローカル変更が破棄されます。 |
| `` @ `` | 명령어 로그 메뉴 열기 | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | 푸시 | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | 업데이트 | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
@@ -19,20 +17,21 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` } `` | Diff 보기의 변경 사항 주위에 표시되는 컨텍스트의 크기를 늘리기 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Diff 보기의 변경 사항 주위에 표시되는 컨텍스트 크기 줄이기 | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` <c-p> `` | 커스텀 Patch 옵션 보기 | |
| `` <ctrl+p> `` | 커스텀 Patch 옵션 보기 | |
| `` m `` | View merge/rebase options | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | 새로고침 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | 다음 스크린 모드 (normal/half/fullscreen) | |
| `` _ `` | 이전 스크린 모드 | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | 취소 | |
| `` ? `` | 매뉴 열기 | |
| `` <c-s> `` | View filter-by-path options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | Diff 메뉴 열기 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | Diff 메뉴 열기 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | 종료 | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | 공백문자를 Diff 뷰에서 표시 여부 전환 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+s> `` | View filter-by-path options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Diff 메뉴 열기 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | 종료 | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | 공백문자를 Diff 뷰에서 표시 여부 전환 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | 설정 파일 수정 | Open file in external editor. |
| `` z `` | 되돌리기 (reflog) (실험적) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | 다시 실행 (reflog) (실험적) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
@@ -42,11 +41,11 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` , `` | 이전 페이지 | |
| `` . `` | 다음 페이지 | |
| `` < (<home>) `` | 맨 위로 스크롤 | |
| `` > (<end>) `` | 맨 아래로 스크롤 | |
| `` <, <home> `` | 맨 위로 스크롤 | |
| `` >, <end> `` | 맨 아래로 스크롤 | |
| `` v `` | 드래그 선택 전환 | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | 검색 시작 | |
| `` H `` | 우 스크롤 | |
| `` L `` | 좌 스크롤 | |
@@ -64,20 +63,20 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 브라우저에서 커밋 열기 | |
| `` n `` | 커밋에서 새 브랜치를 만듭니다. | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
@@ -96,30 +95,30 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Drop | Remove the stash entry from the stash list. |
| `` n `` | 새 브랜치 생성 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 브라우저에서 커밋 열기 | |
| `` n `` | 커밋에서 새 브랜치를 만듭니다. | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
@@ -145,11 +144,11 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | Pick hunk | |
| `` b `` | Pick all hunks | |
| `` <up> `` | 이전 hunk를 선택 | |
| `` <down> `` | 다음 hunk를 선택 | |
| `` <left> `` | 이전 충돌을 선택 | |
| `` <right> `` | 다음 충돌을 선택 | |
| `` b `` | Pick both hunks | |
| `` <up>, k `` | 이전 hunk를 선택 | |
| `` <down>, j `` | 다음 hunk를 선택 | |
| `` <left>, h `` | 이전 충돌을 선택 | |
| `` <right>, l `` | 다음 충돌을 선택 | |
| `` z `` | 되돌리기 | Undo last merge conflict resolution. |
| `` e `` | 파일 편집 | Open file in external editor. |
| `` o `` | 파일 닫기 | Open file in default application. |
@@ -160,8 +159,8 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` mouse wheel down (fn+up) `` | 아래로 스크롤 | |
| `` mouse wheel up (fn+down) `` | 위로 스크롤 | |
| `` <mouse wheel down> (fn+up) `` | 아래로 스크롤 | |
| `` <mouse wheel up> (fn+down) `` | 위로 스크롤 | |
| `` <tab> `` | 패널 전환 | Switch to other view (staged/unstaged changes). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | 검색 시작 | |
@@ -170,14 +169,15 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | 이전 hunk를 선택 | |
| `` <right> `` | 다음 hunk를 선택 | |
| `` <left>, h `` | 이전 hunk를 선택 | |
| `` <right>, l `` | 다음 hunk를 선택 | |
| `` v `` | 드래그 선택 전환 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` <ctrl+o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` o `` | 파일 닫기 | Open file in default application. |
| `` e `` | 파일 편집 | Open file in external editor. |
| `` <space> `` | Line(s)을 패치에 추가/삭제 | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Exit custom patch builder | |
| `` / `` | 검색 시작 | |
@@ -185,11 +185,11 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | 이전 hunk를 선택 | |
| `` <right> `` | 다음 hunk를 선택 | |
| `` <left>, h `` | 이전 hunk를 선택 | |
| `` <right>, l `` | 다음 hunk를 선택 | |
| `` v `` | 드래그 선택 전환 | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` <ctrl+o> `` | 선택한 텍스트를 클립보드에 복사 | |
| `` <space> `` | Staged 전환 | 선택한 행을 staged / unstaged |
| `` d `` | 변경을 삭제 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | 파일 닫기 | Open file in default application. |
@@ -200,21 +200,23 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` c `` | 커밋 변경내용 | 스테이징된 변경 사항 커밋. |
| `` w `` | Commit changes without pre-commit hook | |
| `` C `` | Git 편집기를 사용하여 변경 내용을 커밋합니다. | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` o `` | 풀 리퀘스트 생성 | |
| `` O `` | 풀 리퀘스트 생성 옵션 | |
| `` <c-y> `` | 풀 리퀘스트 URL을 클립보드에 복사 | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | 풀 리퀘스트 URL을 클립보드에 복사 | |
| `` c `` | 이름으로 체크아웃 | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | 강제 체크아웃 | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
@@ -227,28 +229,27 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | View reset options | |
| `` R `` | 브랜치 이름 변경 | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` s `` | 스쿼시 | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | 커밋메시지 변경 | Reword the selected commit's message. |
| `` R `` | 에디터에서 커밋메시지 수정 | |
| `` d `` | 커밋 삭제 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
@@ -306,40 +308,41 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` F `` | Create fixup commit | Create fixup commit for this commit |
| `` S `` | Apply fixup commits | Squash all 'fixup!' commits above selected commit (autosquash) |
| `` <c-j> `` | 커밋을 1개 아래로 이동 | |
| `` <c-k> `` | 커밋을 1개 위로 이동 | |
| `` <ctrl+j>, <alt+down> `` | 커밋을 1개 아래로 이동 | |
| `` <ctrl+k>, <alt+up> `` | 커밋을 1개 위로 이동 | |
| `` V `` | 커밋을 붙여넣기 (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Amend commit with staged changes |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | 로그 메뉴 열기 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <ctrl+l> `` | 로그 메뉴 열기 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | 체크아웃 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 커밋 attribute 복사 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 브라우저에서 커밋 열기 | |
| `` n `` | 커밋에서 새 브랜치를 만듭니다. | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | View reset options | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 커밋을 복사 (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <space> `` | Toggle file included in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Toggle all files included in patch | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Enter file to add selectedlines to the patch (or toggle directory collapsed) | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
@@ -347,7 +350,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | 검색 시작 | |
| `` / `` | Filter the current view by text | |
## 커밋메시지
@@ -360,31 +363,31 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy tag to clipboard | |
| `` <ctrl+o> `` | Copy tag to clipboard | |
| `` <space> `` | 체크아웃 | Checkout the selected tag as a detached HEAD. |
| `` n `` | 태그를 생성 | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
| `` w `` | New worktree | |
| `` d `` | 삭제 | View delete options for local/remote tag. |
| `` P `` | 태그를 push | Push the selected tag to a remote. You'll be prompted to select a remote. |
| `` g `` | 초기화 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` <space> `` | Staged 전환 | Toggle staged for selected file. |
| `` <c-b> `` | 파일을 필터하기 (Staged/unstaged) | |
| `` <ctrl+b> `` | 파일을 필터하기 (Staged/unstaged) | |
| `` y `` | 클립보드에 복사 | |
| `` c `` | 커밋 변경내용 | 스테이징된 변경 사항 커밋. |
| `` w `` | Commit changes without pre-commit hook | |
| `` A `` | 마지맛 커밋 수정 | |
| `` C `` | Git 편집기를 사용하여 변경 내용을 커밋합니다. | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | 파일 닫기 | Open file in default application. |
| `` i `` | Ignore file | |
@@ -397,13 +400,13 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | View upstream reset options | |
| `` D `` | 초기화 | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | 파일 트리뷰로 전환 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
@@ -2,39 +2,38 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
# Lazygit Sneltoetsen
_Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
## Globale sneltoetsen
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-r> `` | Wissel naar een recente repo | |
| `` <pgup> (fn+up/shift+k) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` <pgdown> (fn+down/shift+j) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` @ `` | View commandlog options | View options for the commandlog e.g. show/hide the commandlog and focus the command log. |
| `` P `` | Push | Push the current branch to its upstreambranch. If no upstream is configured, you will be prompted to configure an upstreambranch. |
| `` p `` | Pull | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstreambranch. |
| `` <ctrl+r> `` | Wissel naar een recente repo | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Scroll naar beneden vanaf hoofdpaneel | |
| `` P `` | Push | Push de huidige branch naar de bijbehorende upstream-branch. Als er geen upstream is geconfigureerd wordt er gevraagd om een upstream-branch te configureren. |
| `` p `` | Pull | Pull wijzigingen van de remote voor de huidige branch. Als er geen upstream is geconfigureerd wordt er gevraagd om een upstream-branch te configureren. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shellcommand | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Bekijk merge/rebase opties | Toon abort/continue/skip opties voor huidige merge/rebase. |
| `` R `` | Verversen | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | Volgende scherm modus (normaal/half/groot) | |
| `` _ `` | Vorige scherm modus | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Annuleren | |
| `` ? `` | Open menu | |
| `` <c-s> `` | Bekijk scoping opties | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | Quit | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+s> `` | Bekijk scoping opties | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Open diff menu | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Afsluiten | |
| `` <ctrl+z> `` | Pauzeer de applicatie | |
| `` <ctrl+w> `` | Witruimte weergeven in-/uitschakelen | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Verander config bestand | Open bestand in externe editor. |
| `` z `` | Ongedaan maken (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to undo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo (via reflog) (experimenteel) | The reflog will be used to determine what git command to run to redo the last git command. This does not include changes to the working tree; only commits are taken into consideration. |
| `` Z `` | Redo (via reflog) (experimenteel) | Het reflog wordt gebruikt om te bepalen welk git commando moet worden gebruikt om het laatste git commando te herhalen. Wijzigingen aan de working tree worden niet meegenomen, alleen command's zijn kandidaten. |
## Lijstpaneel navigatie
@@ -42,14 +41,14 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` , `` | Vorige pagina | |
| `` . `` | Volgende pagina | |
| `` < (<home>) `` | Scroll naar boven | |
| `` > (<end>) `` | Scroll naar beneden | |
| `` <, <home> `` | Scroll naar boven | |
| `` >, <end> `` | Scroll naar beneden | |
| `` v `` | Toggle drag selecteer | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Start met zoeken | |
| `` H `` | Scroll left | |
| `` L `` | Scroll right | |
| `` H `` | Scroll naar links | |
| `` L `` | Scroll naar rechts | |
| `` ] `` | Volgende tabblad | |
| `` [ `` | Vorige tabblad | |
@@ -57,17 +56,17 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Kopieer de bestandsnaam naar het klembord | |
| `` <ctrl+o> `` | Kopieer de bestandsnaam naar het klembord | |
| `` w `` | Commit veranderingen zonder pre-commit hook | |
| `` A `` | Wijzig laatste commit | |
| `` C `` | Commit veranderingen met de git editor | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | Open bestand | Open file in default application. |
| `` <ctrl+f> `` | Find base commit for fixup | Vind de commit waar je huidige wijzigingen bovenop zijn gebouwd met als doel die commit te amenden/fixen. Hierdoor hoef je dit niet met de hand te doen. Zie: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open bestand in externe editor. |
| `` o `` | Open bestand | Open bestand in standaardapplicatie. |
| `` i `` | Ignore or exclude file | |
| `` r `` | Refresh bestanden | |
| `` s `` | Stash | Stash all changes. For other variations of stashing, use the view stash options keybinding. |
@@ -76,15 +75,15 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <enter> `` | Stage individuele hunks/lijnen | If the selected item is a file, focus the staging view so you can stage individual hunks/lines. If the selected item is a directory, collapse/expand it. |
| `` d `` | Bekijk 'veranderingen ongedaan maken' opties | View options for discarding changes to the selected file. |
| `` g `` | Bekijk upstream reset opties | |
| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
| `` D `` | Resetten | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | Toggle bestandsboom weergave | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` o `` | Maak een pull-request | |
| `` O `` | Bekijk opties voor pull-aanvraag | |
| `` <c-y> `` | Kopieer de URL van het pull-verzoek naar het klembord | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | Kopieer de URL van het pull-verzoek naar het klembord | |
| `` c `` | Uitchecken bij naam | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` - `` | Vorige branch uitchecken | |
| `` F `` | Forceer checkout | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
| `` d `` | Delete | View delete options for local/remote branch. |
| `` r `` | Rebase branch | Rebase the checked-out branch onto the selected branch. |
| `` d `` | Verwijderen | View delete options for local/remote branch. |
| `` r `` | Rebase branch | Rebase de uitgecheckte branch bovenop de geselecteerde branch. |
| `` M `` | Merge in met huidige checked out branch | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` f `` | Fast-forward deze branch vanaf zijn upstream | Fast-forward selected branch from its upstream. |
| `` T `` | Creëer tag | |
@@ -118,10 +119,9 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Bekijk reset opties | |
| `` R `` | Hernoem branch | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` <space> `` | Toggle bestand inbegrepen in patch | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Toggle all files | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Enter bestand om geselecteerde regels toe te voegen aan de patch | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
| `` ` `` | Toggle bestandsboom weergave | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` = `` | Vouw alle bestanden uit | Vouw alle mappen in de bestandsstructuur uit |
| `` s `` | Squash | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Fixup | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` r `` | Hernoem commit | Reword the selected commit's message. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Hernoem commit | Herschrijf de commit message van de geselecteerde commit. |
| `` R `` | Hernoem commit met editor | |
| `` d `` | Verwijder commit | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` i `` | Start interactive rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` i `` | Start interactieve rebase | Start an interactive rebase for the commits on your branch. This will include all commits from the HEAD commit down to the first merge commit or main branch commit.<br>If you would instead like to start an interactive rebase from the selected commit, press `e`. |
| `` p `` | Pick | Kies commit (wanneer midden in rebase) |
| `` <ctrl+k>, <alt+up> `` | Verplaats commit 1 naar boven | |
| `` V `` | Plak commits (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` B `` | Markeer als basiscommit voor rebase | Selecteer een basiscommit voor de volgende rebase. Als je rebased op een branch worden alleen commits boven de basiscommit meegenomen. Hiervoor wordt het `git rebase --onto` commando gebruikt. |
| `` A `` | Amend | Wijzig commit met staged veranderingen |
| `` a `` | Amend commit attribute | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <space> `` | Uitchecken | Checkout the selected commit as a detached HEAD. |
| `` t `` | Revert | Maak een revert commit voor de geselecteerde commit, die de wijzigingen in deze commit terugdraait. |
| `` T `` | Tag commit | Maak een nieuwe tag die naar de geselecteerde commit wijst. Je wordt gevraagd om een tag naam en optionele omschrijving. |
| `` <ctrl+l> `` | Log opties weergeven | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Uitchecken | Check de geselecteerde branch uit als een detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Sluit lijn-bij-lijn modus | |
| `` / `` | Start met zoeken | |
@@ -251,48 +254,48 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <space> `` | Uitchecken | Check de geselecteerde branch uit als een detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <c-o> `` | Kopieer branch name naar klembord | |
| `` <space> `` | Uitchecken | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
| `` <ctrl+o> `` | Kopieer branch name naar klembord | |
| `` <space> `` | Uitchecken | Geselecteerde remote branch uitchecken als nieuwe locale branch of als detached head. |
| `` n `` | Nieuwe branch | |
| `` w `` | New worktree | |
| `` M `` | Merge in met huidige checked out branch | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` r `` | Rebase branch | Rebase the checked-out branch onto the selected branch. |
| `` d `` | Delete | Delete the remote branch from the remote. |
| `` u `` | Set as upstream | Stel in als upstream van uitgecheckte branch |
| `` r `` | Rebase branch | Rebase de uitgecheckte branch bovenop de geselecteerde branch. |
| `` d `` | Verwijderen | Delete the remote branch from the remote. |
| `` u `` | Instellen als upstream | Stel in als upstream van uitgecheckte branch |
| `` s `` | Sort order | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` d `` | Verwijdert change (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | Open bestand | Open file in default application. |
| `` e `` | Verander bestand | Open file in external editor. |
| `` o `` | Open bestand | Open bestand in standaardapplicatie. |
| `` e `` | Verander bestand | Open bestand in externe editor. |
| `` <esc> `` | Ga terug naar het bestanden paneel | |
| `` <tab> `` | Ga naar een ander paneel | Switch to other view (staged/unstaged changes). |
| `` E `` | Edit hunk | Edit selected hunk in external editor. |
| `` w `` | Commit veranderingen zonder pre-commit hook | |
| `` C `` | Commit veranderingen met de git editor | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Vind de commit waar je huidige wijzigingen bovenop zijn gebouwd met als doel die commit te amenden/fixen. Hierdoor hoef je dit niet met de hand te doen. Zie: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Start met zoeken | |
## Stash
@@ -336,50 +339,50 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Pop | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Laten vallen | Remove the stash entry from the stash list. |
| `` n `` | Nieuwe branch | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` r `` | Rename stash | |
| `` w `` | New worktree | |
| `` r `` | Hernoem stash | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | Bekijk gecommite bestanden | |
| `` w `` | View worktree options | |
| `` / `` | Filter the current view by text | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Open config bestand | Open file in default application. |
| `` e `` | Verander config bestand | Open file in external editor. |
| `` e `` | Verander config bestand | Open bestand in externe editor. |
| `` u `` | Check voor updates | |
| `` <enter> `` | Wissel naar een recente repo | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Uitchecken | Check de geselecteerde branch uit als een detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` n `` | Creëer nieuwe branch van commit | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Verplaats commits naar nieuwe branch | Maak een nieuwe branch en verplaats niet-gepushte commits van de huidige branch hier naar toe. Gebruik dit in het geval dat je deze commits eigenlijk op een nieuwe branch had willen maken.<br><br>Let op dat de selectie genegeerd wordt. De nieuwe branch komt ofwel bovenop de main branch, of bovenop de huidige branch (je kan kiezen). |
| `` w `` | New worktree | |
| `` g `` | Bekijk reset opties | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Kopieer commit (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
@@ -409,6 +412,6 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` n `` | New worktree | |
| `` <space> `` | Switch | Switch to the selected worktree. |
| `` o `` | Open in editor | |
| `` d `` | Remove | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
| `` o `` | Openen in editor | |
| `` d `` | Verwijderen | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
@@ -2,37 +2,36 @@ _This file is auto-generated. To update, make the changes in the pkg/i18n direct
# Lazygit Skróty klawiszowe
_Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
## Globalne skróty klawiszowe
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-r> `` | Przełącz na ostatnie repozytorium | |
| `` <pgup> (fn+up/shift+k) `` | Przewiń główne okno w górę | |
| `` <pgdown> (fn+down/shift+j) `` | Przewiń główne okno w dół | |
| `` <ctrl+r> `` | Przełącz na ostatnie repozytorium | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Przewiń główne okno w górę | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Przewiń główne okno w dół | |
| `` @ `` | Pokaż opcje dziennika poleceń | Pokaż opcje dla dziennika poleceń, np. pokazywanie/ukrywanie dziennika poleceń i skupienie na dzienniku poleceń. |
| `` P `` | Wypchnij | Wypchnij bieżącą gałąź do jej gałęzi nadrzędnej. Jeśli nie skonfigurowano gałęzi nadrzędnej, zostaniesz poproszony o skonfigurowanie gałęzi nadrzędnej. |
| `` p `` | Pociągnij | Pociągnij zmiany z zdalnego dla bieżącej gałęzi. Jeśli nie skonfigurowano gałęzi nadrzędnej, zostaniesz poproszony o skonfigurowanie gałęzi nadrzędnej. |
| `` p `` | Pociągnij | Pociągnij zmiany ze zdalnego dla bieżącej gałęzi. Jeśli nie skonfigurowano gałęzi nadrzędnej, zostaniesz poproszony o skonfigurowanie gałęzi nadrzędnej. |
| `` ) `` | Increase rename similarity threshold | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | Decrease rename similarity threshold | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | Zwiększ rozmiar kontekstu w widoku różnic | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Zmniejsz rozmiar kontekstu w widoku różnic | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Pokaż opcje scalania/rebase | Pokaż opcje do przerwania/kontynuowania/pominięcia bieżącego scalania/rebase. |
| `` R `` | Odśwież | Odśwież stan git (tj. uruchom `git status`, `git branch`, itp. w tle, aby zaktualizować zawartość paneli). To nie uruchamia `git fetch`. |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Anuluj | |
| `` ? `` | Otwórz menu przypisań klawiszy | |
| `` <c-s> `` | Pokaż opcje filtrowania | Pokaż opcje filtrowania dziennika commitów, tak aby pokazywane były tylko commity pasujące do filtra. |
| `` W `` | Pokaż opcje różnicowania | Pokaż opcje dotyczące różnicowania dwóch refów, np. różnicowanie względem wybranego refa, wprowadzanie refa do różnicowania i odwracanie kierunku różnic. |
| `` <c-e> `` | Pokaż opcje różnicowania | Pokaż opcje dotyczące różnicowania dwóch refów, np. różnicowanie względem wybranego refa, wprowadzanie refa do różnicowania i odwracanie kierunku różnic. |
| `` q `` | Wyjdź | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | Przełącz białe znaki | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+s> `` | Pokaż opcje filtrowania | Pokaż opcje filtrowania dziennika commitów, tak aby pokazywane były tylko commity pasujące do filtra. |
| `` W, <ctrl+e> `` | Pokaż opcje różnicowania | Pokaż opcje dotyczące różnicowania dwóch refów, np. różnicowanie względem wybranego refa, wprowadzanie refa do różnicowania i odwracanie kierunku różnic. |
| `` q, <ctrl+c> `` | Wyjdź | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Przełącz białe znaki | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` z `` | Cofnij | Dziennik reflog zostanie użyty do określenia, jakie polecenie git należy uruchomić, aby cofnąć ostatnie polecenie git. Nie obejmuje to zmian w drzewie roboczym; brane są pod uwagę tylko commity. |
| `` Z `` | Ponów | Dziennik reflog zostanie użyty do określenia, jakie polecenie git należy uruchomić, aby ponowić ostatnie polecenie git. Nie obejmuje to zmian w drzewie roboczym; brane są pod uwagę tylko commity. |
@@ -42,11 +41,11 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
|-----|--------|-------------|
| `` , `` | Poprzednia strona | |
| `` . `` | Następna strona | |
| `` < (<home>) `` | Przewiń do góry | |
| `` > (<end>) `` | Przewiń do dołu | |
| `` <, <home> `` | Przewiń do góry | |
| `` >, <end> `` | Przewiń do dołu | |
| `` v `` | Przełącz zaznaczenie zakresu | |
| `` <s-down> `` | Zaznacz zakres w dół | |
| `` <s-up> `` | Zaznacz zakres w górę | |
| `` <shift+down> `` | Zaznacz zakres w dół | |
| `` <shift+up> `` | Zaznacz zakres w górę | |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
| `` H `` | Przewiń w lewo | |
| `` L `` | Przewiń w prawo | |
@@ -57,40 +56,42 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` s `` | Scal | Scal wybrany commit z commitami poniżej. Wiadomość wybranego commita zostanie dołączona do commita poniżej. |
| `` f `` | Poprawka | Włącz wybrany commit do commita poniżej. Podobnie do fixup, ale wiadomość wybranego commita zostanie odrzucona. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` d `` | Usuń | Usuń wybrany commit. To usunie commit z gałęzi za pomocą rebazowania. Jeśli commit wprowadza zmiany, od których zależą późniejsze commity, być może będziesz musiał rozwiązać konflikty scalania. |
| `` e `` | Edytuj (rozpocznij interaktywne rebazowanie) | Edytuj wybrany commit. Użyj tego, aby rozpocząć interaktywne rebazowanie od wybranego commita. Podczas trwania rebazowania, to oznaczy wybrany commit do edycji, co oznacza, że po kontynuacji rebazowania, rebazowanie zostanie wstrzymane na wybranym commicie, aby umożliwić wprowadzenie zmian. |
| `` i `` | Rozpocznij interaktywny rebase | Rozpocznij interaktywny rebase dla commitów na twoim branchu. To będzie zawierać wszystkie commity od HEAD do pierwszego commita scalenia lub commita głównego brancha.<br>Jeśli chcesz zamiast tego rozpocząć interaktywny rebase od wybranego commita, naciśnij `e`. |
| `` p `` | Wybierz | Oznacz wybrany commit do wybrania (podczas rebazowania). Oznacza to, że commit zostanie zachowany po kontynuacji rebazowania. |
| `` d `` | Usuń | Usuń wybrany commit. To usunie commit z gałęzi za pomocą przebazowania. Jeśli commit wprowadza zmiany, od których zależą późniejsze commity, być może będziesz musiał rozwiązać konflikty scalania. |
| `` e `` | Edytuj (rozpocznij interaktywne przebazowanie) | Edytuj wybrany commit. Użyj tego, aby rozpocząć interaktywne przebazowanie od wybranego commita. Podczas trwania przebazowania, to oznaczy wybrany commit do edycji, co oznacza, że po kontynuacji przebazowania, przebazowanie zostanie wstrzymane na wybranym commicie, aby umożliwić wprowadzenie zmian. |
| `` i `` | Rozpocznij interaktywne przebazowanie | Rozpocznij interaktywne przebazowanie dla commitów na twojej gałęzi. To będzie zawierać wszystkie commity od HEAD do pierwszego commita scalenia lub commita głównej gałęzi.<br>Jeśli zamiast tego chcesz rozpocząć interaktywne przebazowanie od wybranego commita, naciśnij `e`. |
| `` p `` | Wybierz | Oznacz wybrany commit do wybrania (podczas przebazowania). Oznacza to, że commit zostanie zachowany po kontynuacji przebazowania. |
| `` F `` | Utwórz commit fixup | Utwórz commit 'fixup!' dla wybranego commita. Później możesz nacisnąć `S` na tym samym commicie, aby zastosować wszystkie powyższe commity fixup. |
| `` S `` | Zastosuj commity fixup | Scal wszystkie commity 'fixup!', albo powyżej wybranego commita, albo wszystkie w bieżącej gałęzi (autosquash). |
| `` B `` | Oznacz jako bazowy commit dla rebase | Wybierz bazowy commit dla następnego rebase. Kiedy robisz rebase na branch, tylko commity powyżej bazowego commita zostaną przeniesione. Używa to polecenia `git rebase --onto`. |
| `` A `` | Popraw | Popraw commit ze zmianami zatwierdzonymi. Jeśli wybrany commit jest commit HEAD, to wykona `git commit --amend`. W przeciwnym razie commit zostanie poprawiony za pomocą rebazowania. |
| `` B `` | Oznacz jako bazowy commit dla przebazowania | Wybierz bazowy commit dla następnego przebazowania. Kiedy robisz przebazowanie na gałąź, tylko commity powyżej bazowego commita zostaną przeniesione. Używa to polecenia `git rebase --onto`. |
| `` A `` | Popraw | Popraw commit ze zmianami zatwierdzonymi. Jeśli wybrany commit jest commit HEAD, to wykona `git commit --amend`. W przeciwnym razie commit zostanie poprawiony za pomocą przebazowania. |
| `` a `` | Popraw atrybut commita | Ustaw/Resetuj autora commita lub ustaw współautora. |
| `` t `` | Cofnij | Utwórz commit cofający dla wybranego commita, który stosuje zmiany wybranego commita w odwrotnej kolejności. |
| `` T `` | Otaguj commit | Utwórz nowy tag wskazujący na wybrany commit. Zostaniesz poproszony o wprowadzenie nazwy tagu i opcjonalnego opisu. |
| `` <c-l> `` | Zobacz opcje logów | Zobacz opcje dla logów commitów, np. zmiana kolejności sortowania, ukrywanie grafu gita, pokazywanie całego grafu gita. |
| `` <ctrl+l> `` | Zobacz opcje logów | Zobacz opcje dla logów commitów, np. zmiana kolejności sortowania, ukrywanie grafu gita, pokazywanie całego grafu gita. |
| `` G `` | Otwórz żądanie ściągnięcia w przeglądarce | |
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
| `` <left>, h `` | Idź do poprzedniego fragmentu | |
| `` <right>, l `` | Idź do następnego fragmentu | |
| `` v `` | Przełącz zaznaczenie zakresu | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Kopiuj zaznaczony tekst do schowka | |
| `` <ctrl+o> `` | Kopiuj zaznaczony tekst do schowka | |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
| `` e `` | Edytuj plik | Otwórz plik w zewnętrznym edytorze. |
| `` <space> `` | Przełącz linie w łatce | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` o `` | Utwórz żądanie ściągnięcia | |
| `` O `` | Zobacz opcje tworzenia pull requesta | |
| `` c `` | Przełącz według nazwy | Przełącz według nazwy. W polu wprowadzania możesz wpisać '-' aby przełączyć się na ostatnią gałąź. |
| `` - `` | Checkout previous branch | |
| `` - `` | Przełącz na poprzednią gałąź | |
| `` F `` | Wymuś przełączenie | Wymuś przełączenie wybranej gałęzi. To spowoduje odrzucenie wszystkich lokalnych zmian w drzewie roboczym przed przełączeniem na wybraną gałąź. |
| `` d `` | Odrzuć | Gdy zaznaczona jest niezatwierdzona zmiana, odrzuć ją używając `git reset`. Gdy zaznaczona jest zatwierdzona zmiana, cofnij zatwierdzenie. |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
@@ -216,7 +239,7 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` c `` | Commit | Zatwierdź zmiany zatwierdzone. |
| `` w `` | Zatwierdź zmiany bez hooka pre-commit | |
| `` C `` | Zatwierdź zmiany używając edytora git | |
| `` <c-f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
## Panel potwierdzenia
@@ -225,21 +248,21 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` <ctrl+b> `` | Filtruj pliki według statusu | |
| `` y `` | Kopiuj do schowka | |
| `` c `` | Commit | Zatwierdź zmiany zatwierdzone. |
| `` w `` | Zatwierdź zmiany bez hooka pre-commit | |
| `` A `` | Popraw ostatni commit | |
| `` C `` | Zatwierdź zmiany używając edytora git | |
| `` <c-f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Znajdź bazowy commit do poprawki | Znajdź commit, na którym opierają się Twoje obecne zmiany, w celu poprawienia/zmiany commita. To pozwala Ci uniknąć przeglądania commitów w Twojej gałęzi jeden po drugim, aby zobaczyć, który commit powinien być poprawiony/zmieniony. Zobacz dokumentację: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edytuj | Otwórz plik w zewnętrznym edytorze. |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
| `` i `` | Ignoruj lub wyklucz plik | |
@@ -252,25 +275,25 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` g `` | Pokaż opcje resetowania do upstream | |
| `` D `` | Reset | Wyświetl opcje resetu dla drzewa roboczego (np. zniszczenie drzewa roboczego). |
| `` ` `` | Przełącz widok drzewa plików | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` f `` | Pobierz | Pobierz zmiany ze zdalnego serwera. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
| `` / `` | Filtruj bieżący widok po tekście | |
## Pliki commita
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Kopiuj ścieżkę do schowka | |
| `` <ctrl+o> `` | Kopiuj ścieżkę do schowka | |
| `` y `` | Kopiuj do schowka | |
| `` c `` | Przełącz | Przełącz plik. Zastępuje plik w twoim drzewie roboczym wersją z wybranego commita. |
| `` d `` | Usuń | Odrzuć zmiany w tym pliku z tego commita. Uruchamia interaktywny rebase w tle, więc możesz otrzymać konflikt scalania, jeśli późniejszy commit również zmienia ten plik. |
| `` d `` | Odrzuć | Odrzuć zmiany w tym pliku z tego commita. Uruchamia interaktywne przebazowanie w tle, więc możesz otrzymać konflikt scalania, jeśli późniejszy commit również zmienia ten plik. |
| `` o `` | Otwórz plik | Otwórz plik w domyślnej aplikacji. |
| `` e `` | Edytuj | Otwórz plik w zewnętrznym edytorze. |
| `` <space> `` | Przełącz plik włączony w łatkę | Przełącz, czy plik jest włączony w niestandardową łatkę. Zobacz https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Przełącz wszystkie pliki | Dodaj/usuń wszystkie pliki commita do niestandardowej łatki. Zobacz https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Wejdź do pliku / Przełącz zwiń katalog | Jeśli plik jest wybrany, wejdź do pliku, aby móc dodawać/usuwać poszczególne linie do niestandardowej łatki. Jeśli wybrany jest katalog, przełącz katalog. |
@@ -278,7 +301,7 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Szukaj w bieżącym widoku po tekście | |
| `` / `` | Filtruj bieżący widok po tekście | |
## Podsumowanie commita
@@ -287,26 +310,6 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
@@ -315,48 +318,48 @@ _Legenda: `<c-b>` oznacza ctrl+b, `<a-b>` oznacza alt+b, `B` oznacza shift+b_
| `` g `` | Wyciągnij | Zastosuj wpis schowka do katalogu roboczego i usuń wpis schowka. |
| `` d `` | Usuń | Usuń wpis schowka z listy schowka. |
| `` n `` | Nowa gałąź | Utwórz nową gałąź z wybranego wpisu schowka. Działa poprzez przełączenie git na commit, na którym wpis schowka został utworzony, tworzenie nowej gałęzi z tego commita, a następnie zastosowanie wpisu schowka do nowej gałęzi jako dodatkowego commita. |
| `` w `` | Nowe drzewo pracy | |
| `` r `` | Zmień nazwę schowka | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | Wyświetl pliki | |
| `` w `` | Zobacz opcje drzewa pracy | |
| `` / `` | Filtruj bieżący widok po tekście | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Otwórz plik konfiguracyjny | Otwórz plik w domyślnej aplikacji. |
| `` e `` | Edytuj plik konfiguracyjny | Otwórz plik w zewnętrznym edytorze. |
| `` u `` | Sprawdź aktualizacje | |
| `` <enter> `` | Przełącz na ostatnie repozytorium | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Przełącz | Przełącz wybrany commit jako odłączoną HEAD. |
| `` y `` | Kopiuj atrybut commita do schowka | Kopiuj atrybut commita do schowka (np. hash, URL, różnice, wiadomość, autor). |
| `` o `` | Otwórz commit w przeglądarce | |
| `` n `` | Utwórz nową gałąź z commita | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | Przenieś commity do nowej gałęzi | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nowe drzewo pracy | |
| `` g `` | Reset | Wyświetl opcje resetu (miękki/mieszany/twardy) do wybranego elementu. |
| `` C `` | Kopiuj (cherry-pick) | Oznacz commit jako skopiowany. Następnie, w widoku lokalnych commitów, możesz nacisnąć `V`, aby wkleić (cherry-pick) skopiowane commity do sprawdzonej gałęzi. W dowolnym momencie możesz nacisnąć `<esc>`, aby anulować zaznaczenie. |
_This file is auto-generated. To update, make the changes in the pkg/i18n directory and then run `go generate ./...` from the project root._
# Lazygit Keybindings
_Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
# Lazygit Atalhos do teclado
## Combinações globais de teclas
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-r> `` | Mudar para um repositório recente | |
| `` <pgup> (fn+up/shift+k) `` | Rolar janela principal para cima | |
| `` <pgdown> (fn+down/shift+j) `` | Rolar a janela principal para baixo | |
| `` <ctrl+r> `` | Mudar para um repositório recente | |
| `` <pgup>, K, <ctrl+u> (fn+up/shift+k) `` | Rolar janela principal para cima | |
| `` <pgdown>, J, <ctrl+d> (fn+down/shift+j) `` | Rolar a janela principal para baixo | |
| `` @ `` | View command log options | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Empurre (Push) | Faça push do branch atual para o seu branch upstream. Se nenhum upstream estiver configurado, você será solicitado a configurar um branch a montante. |
| `` p `` | Puxar (Pull) | Puxe alterações do controle remoto para o ramo atual. Se nenhum upstream estiver configurado, será solicitado configurar um ramo a montante. |
@@ -19,20 +17,21 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` } `` | Increase diff context size | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Decrease diff context size | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Executar comando da shell | Traga um prompt onde você pode digitar um comando shell para executar. |
| `` <c-p> `` | Ver opções de patch personalizadas | |
| `` <ctrl+p> `` | Ver opções de patch personalizadas | |
| `` m `` | Ver opções de mesclar/rebase | Ver opções para abortar/continuar/pular o merge/rebase atual. |
| `` R `` | Atualizar | Atualize o estado do git (ou seja, execute `git status`, `git branch`, etc em segundo plano para atualizar o conteúdo de painéis). Isso não executa `git fetch`. |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` + `` | Modo de tela seguinte (normal/metade/tela cheia) | |
| `` _ `` | Modo de tela anterior | |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Cancelar | |
| `` ? `` | Open keybindings menu | |
| `` <c-s> `` | View filter options | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | Sair | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` ? `` | Abrir o menu de atalhos do teclado | |
| `` <ctrl+s> `` | Ver opções de filtro | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | View diffing options | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Sair | |
| `` <ctrl+z> `` | Suspender a aplicação | |
| `` <ctrl+w> `` | Toggle whitespace | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Editar arquivo de configuração | Abrir arquivo no editor externo. |
| `` z `` | Desfazer | O reflog será usado para determinar qual comando git para executar para desfazer o último comando git. Isto não inclui mudanças na árvore de trabalho; apenas compromissos são tidos em consideração. |
| `` Z `` | Refazer | O reflog será usado para determinar qual comando git para executar para refazer o último comando git. Isto não inclui mudanças na árvore de trabalho; apenas compromissos são tidos em consideração. |
@@ -40,32 +39,32 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` , `` | Previous page | |
| `` . `` | Next page | |
| `` < (<home>) `` | Scroll to top | |
| `` > (<end>) `` | Scroll to bottom | |
| `` , `` | Aba anterior | |
| `` . `` | Próxima aba | |
| `` <, <home> `` | Voltar ao topo | |
| `` >, <end> `` | Ir para o final | |
| `` v `` | Toggle range select | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` / `` | Search the current view by text | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Pesquisar na visualização atual por texto | |
| `` H `` | Rolar à esquerda | |
| `` L `` | Scroll para a direita | |
| `` ] `` | Next tab | |
| `` [ `` | Previous tab | |
| `` ] `` | Próxima aba | |
| `` [ `` | Aba anterior | |
## Arquivos
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy path to clipboard | |
| `` <ctrl+o> `` | Copiar caminho para área de transferência | |
| `` <space> `` | Etapa | Alternar para staging para o arquivo selecionado. |
| `` <c-b> `` | Filtrar arquivos por status | |
| `` <ctrl+b> `` | Filtrar arquivos por status | |
| `` y `` | Copy to clipboard | |
| `` c `` | Commit | Submeter mudanças em staging |
| `` w `` | Fazer commit de alterações sem pré-commit | |
| `` A `` | Alterar último commit | |
| `` C `` | Enviar alteração usando um editor Git | |
| `` <c-f> `` | Encontrar commit da base para consertar | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Encontrar commit da base para corrigir | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Editar | Abrir arquivo no editor externo. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` i `` | Ignore or exclude file | |
@@ -78,26 +77,28 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | View upstream reset options | |
| `` D `` | Restaurar | Opções de redefinição de exibição para árvore de trabalho (por exemplo, nukando a árvore de trabalho). |
| `` ` `` | Alternar exibição de árvore de arquivo | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` o `` | Create pull request | |
| `` w `` | Nova árvore de trabalho | |
| `` o `` | Criar solicitação de pull | |
| `` O `` | View create pull request options | |
| `` <c-y> `` | Copiar URL do pull request para área de transferência | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | Copiar URL do pull request para área de transferência | |
| `` c `` | Checar por nome | Checar por nome. Na caixa de entrada você pode inserir '-' para trocar para a última branch |
| `` - `` | Checkout da branch anterior | |
| `` F `` | Forçar checagem | Forçar checagem da branch selecionada. Isso irá descartar todas as mudanças no seu diretório de trabalho antes cheque a branch selecionada |
@@ -105,65 +106,65 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` r `` | Refazer | Refazer a branch checada na branch selecionada |
| `` M `` | Mesclar | Ver opções para mesclar o item selecionado no branch atual (mesclar regularmente, mesclar squash) |
| `` f `` | Avanço rápido | Encaminhamento rápido de branch selecionada a partir do upstream. |
| `` T `` | New tag | |
| `` T `` | Nova etiqueta | |
| `` s `` | Sort order | |
| `` g `` | Restaurar | |
| `` R `` | Rename branch | |
| `` R `` | Renomear branch | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` / `` | Filtrar a visualização atual por texto | |
## Commit arquivos
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy path to clipboard | |
| `` <ctrl+o> `` | Copiar caminho para área de transferência | |
| `` y `` | Copy to clipboard | |
| `` c `` | Verificar | Arquivo de check-out. Isso substitui o arquivo em sua árvore de trabalho com a versão do commit selecionado. |
| `` d `` | Remover | Descartar as alterações desse commit para este arquivo. Isso executa uma rebase interativa em segundo plano, então você pode ter um conflito de merge se um commit posterior também alterar este arquivo. |
| `` d `` | Descartar | Descartar as alterações desse commit para este arquivo. Isso executa uma rebase interativa em segundo plano, então você pode ter um conflito de merge se um commit posterior também alterar este arquivo. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` e `` | Editar | Abrir arquivo no editor externo. |
| `` <space> `` | Alternar entre o arquivo incluído no patch | Alternar se o arquivo está incluído no patch personalizado. Veja https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Alternar todos os arquivos | Adicionar/remover todos os arquivos de commit para atualização personalizada. Consulte https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Insira o arquivo / Alternar diretório recolhido | Se um arquivo estiver selecionado, insira o arquivo para que você possa adicionar/remover linhas individuais no patch personalizado. Se um diretório for selecionado, ative o diretório. |
| `` ` `` | Alternar exibição de árvore de arquivo | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` - `` | Recolher todos os arquivos | Recolher todos os diretórios na árvore de arquivos |
| `` = `` | Expandir todos os arquivos | Expandir todos os diretórios na árvore do arquivo |
| `` 0 `` | Focus main view | |
| `` / `` | Search the current view by text | |
| `` 0 `` | Focar visualização principal | |
| `` / `` | Filtrar a visualização atual por texto | |
| `` s `` | Squash | Squash o commit selecionado no commit abaixo dele. A mensagem do commit selecionado será anexada ao commit abaixo dele. |
| `` f `` | Fixup | Faça o commit selecionado no commit abaixo dele. Semelhante para o squash, mas a mensagem do commit selecionado será descartada. |
| `` f `` | Corrigir | Faça o commit selecionado no commit abaixo dele. Semelhante para o squash, mas a mensagem do commit selecionado será descartada. |
| `` c `` | Configurar mensagem de correção | Defina a opção de mensagem para o commit de correção. A opção -C significa usar a mensagem deste commit em vez da mensagem do commit alvo. |
| `` r `` | Reword | Repetir a mensagem de submissão selecionada. |
| `` R `` | Republicar com o editor | |
| `` d `` | Descartar | Solte o commit selecionado. Isso irá remover o commit do branch através de uma rebase. Se o commit faz com que as alterações em commits posteriores dependem, você pode precisar resolver conflitos de merge. |
@@ -172,52 +173,45 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` p `` | Escolher | Marque o commit selecionado para ser escolhido (quando meados da base). Isso significa que o commit será mantido ao continuar o rebase. |
| `` F `` | Criar commit de correção | Crie o commit 'correção!' para o commit selecionado. Mais tarde, você pode pressionar `S` neste mesmo commit para aplicar todas os commits de correção acima. |
| `` S `` | Aplicar commits de correções | Aplicar Squash all 'correção!', seja acima do commit selecionado, ou tudo no branch atual (autosquash). |
| `` <c-j> `` | Mover commit um para baixo | |
| `` <c-k> `` | Mover o commit um para cima | |
| `` <ctrl+j>, <alt+down> `` | Mover commit um para baixo | |
| `` <ctrl+k>, <alt+up> `` | Mover o commit um para cima | |
| `` V `` | Colar (cherry-pick) | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Modificar | Alterar o commit com mudanças em sted. Se o commit selecionado for o commit HEAD, ele executará o `git commit --amend`. Caso contrário, o compromisso será alterado por meio de uma base de apoio. |
| `` a `` | Alterar atributo de commit | Definir/Redefinir autor de submissão ou co-autor definido. |
| `` t `` | Reverter | Crie um commit reverter para o commit selecionado, que aplica as alterações do commit selecionado em reverso. |
| `` T `` | Tag commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` T `` | Etiquetar commit | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <ctrl+l> `` | View log options | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Verificar | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` o `` | Abrir commit no navegador | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` g `` | Restaurar | Ver opções de redefinição (soft/mixed/hard) para redefinir para o item selecionado. |
| `` C `` | Copiar (cherry-pick) | Marcar commit como copiado. Então, dentro da visualização local de commits, você pode pressionar `V` para colar (cherry-pick) o(s) commit(s) copiado(s) em seu branch de check-out. A qualquer momento você pode pressionar `<esc>` para cancelar a seleção. |
| `` d `` | Descartar | Quando a mudança não desejada for selecionada, descarte a mudança usando `git reset`. Quando a mudança em fase é selecionada, despare a mudança. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
@@ -263,19 +257,27 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` c `` | Commit | Submeter mudanças em staging |
| `` w `` | Fazer commit de alterações sem pré-commit | |
| `` C `` | Enviar alteração usando um editor Git | |
| `` <c-f> `` | Encontrar commit da base para consertar | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Search the current view by text | |
| `` <ctrl+f> `` | Encontrar commit da base para corrigir | Encontre o commit em que as suas mudanças atuais estão se baseando, para alterar/consertar o commit. Isso poupa-te você de ter que olhar pelos commits da sua branch um por um para ver qual commit deve ser alterado/consertado<br>Veja a documentação:<br><https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` / `` | Pesquisar na visualização atual por texto | |
## Painel de confirmação
| Key | Action | Info |
|-----|--------|-------------|
| `` <enter> `` | Confirmar | |
| `` <esc> `` | Fechar/Cancelar | |
| `` <ctrl+o> `` | Copy to clipboard | |
## Painel principal (mesclagem)
| Key | Action | Info |
|-----|--------|-------------|
| `` <space> `` | Escolha o local | |
| `` b `` | Pegar todos os pedaços | |
| `` <up> `` | Trecho anterior | |
| `` <down> `` | Próximo trecho | |
| `` <left> `` | Conflito anterior | |
| `` <right> `` | Próximo conflito | |
| `` b `` | Pick both hunks | |
| `` <up>, k `` | Trecho anterior | |
| `` <down>, j `` | Próximo trecho | |
| `` <left>, h `` | Conflito anterior | |
| `` <right>, l `` | Próximo conflito | |
| `` z `` | Desfazer | Desfazer resolução de conflitos de última mesclagem. |
| `` e `` | Editar arquivo | Abrir arquivo no editor externo. |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
@@ -286,36 +288,37 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | Ir para o local anterior | |
| `` <right> `` | Ir para o próximo trecho | |
| `` <left>, h `` | Ir para o local anterior | |
| `` <right>, l `` | Ir para o próximo trecho | |
| `` v `` | Toggle range select | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Copy selected text to clipboard | |
| `` a `` | Toggle hunk selection | Ativa/desativa modo linha por linha vs. modo de seleção por partes. |
| `` <ctrl+o> `` | Copiar texto selecionado para área de transferência | |
| `` o `` | Abrir arquivo | Abrir arquivo no aplicativo padrão. |
| `` e `` | Editar arquivo | Abrir arquivo no editor externo. |
| `` <space> `` | Alternar linhas no caminho | |
| `` d `` | Remover linhas do commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Sair do construtor de patch personalizado | |
| `` / `` | Search the current view by text | |
| `` / `` | Pesquisar na visualização atual por texto | |
| `` <space> `` | Verificar | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` o `` | Abrir commit no navegador | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` g `` | Restaurar | Ver opções de redefinição (soft/mixed/hard) para redefinir para o item selecionado. |
| `` C `` | Copiar (cherry-pick) | Marcar commit como copiado. Então, dentro da visualização local de commits, você pode pressionar `V` para colar (cherry-pick) o(s) commit(s) copiado(s) em seu branch de check-out. A qualquer momento você pode pressionar `<esc>` para cancelar a seleção. |
| `` / `` | Filtrar a visualização atual por texto | |
## Remotes
@@ -327,7 +330,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` e `` | Editar | Edit the selected remote's name or URL. |
| `` f `` | Buscar | Fetch updates from the remote repository. This retrieves new commits and branches without merging them into your local branches. |
| `` F `` | Add fork remote | Quickly add a fork remote by replacing the owner in the origin URL and optionally check out a branch from new remote. |
| `` / `` | Filter the current view by text | |
| `` / `` | Filtrar a visualização atual por texto | |
## Secundário
@@ -335,7 +338,7 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
|-----|--------|-------------|
| `` <tab> `` | Mudar de visão | Alternar para outra visão (staged/não processadas alterações). |
| `` <esc> `` | Exit back to side panel | |
| `` / `` | Search the current view by text | |
| `` / `` | Pesquisar na visualização atual por texto | |
## Stash
@@ -345,56 +348,56 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` g `` | Pop | Aplique a entrada de stash no seu diretório de trabalho e remova a entrada de stash. |
| `` d `` | Descartar | Remova a entrada do stash da lista de armazenamento. |
| `` n `` | Nova branch | Criar um novo ramo a partir da entrada de lixo selecionada. Isso funciona verificando o commit do qual a entrada de lixo foi criada, criar um novo branch a partir desse commit e, em seguida, aplicar a entrada de lixo ao novo branch como um commit adicional. |
| `` r `` | Renomear o stasj | |
| `` 0 `` | Focus main view | |
| `` w `` | Nova árvore de trabalho | |
| `` r `` | Renomear o stash | |
| `` 0 `` | Focar visualização principal | |
| `` <enter> `` | Ver arquivos | |
| `` w `` | View worktree options | |
| `` / `` | Filter the current view by text | |
| `` / `` | Filtrar a visualização atual por texto | |
## Status
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Abrir o ficheiro de config | Abrir arquivo no aplicativo padrão. |
| `` e `` | Editar arquivo de configuração | Abrir arquivo no editor externo. |
| `` u `` | Verificar atualização | |
| `` <enter> `` | Mudar para um repositório recente | |
| `` a `` | Mostrar/ciclo todos os logs de filiais | |
| `` 0 `` | Focus main view | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` <space> `` | Verificar | Checkout the selected commit as a detached HEAD. |
| `` y `` | Copy commit attribute to clipboard | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | Open commit in browser | |
| `` o `` | Abrir commit no navegador | |
| `` n `` | Create new branch off of commit | |
| `` N `` | Mover commits para uma nova branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | Nova árvore de trabalho | |
| `` g `` | Restaurar | Ver opções de redefinição (soft/mixed/hard) para redefinir para o item selecionado. |
| `` C `` | Copiar (cherry-pick) | Marcar commit como copiado. Então, dentro da visualização local de commits, você pode pressionar `V` para colar (cherry-pick) o(s) commit(s) copiado(s) em seu branch de check-out. A qualquer momento você pode pressionar `<esc>` para cancelar a seleção. |
| `` / `` | Pesquisar na visualização atual por texto | |
## Submodules
## Submódulos
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy submodule name to clipboard | |
| `` <ctrl+o> `` | Copiar o nome do submódulo para área de transferência | |
| `` <enter> `` | Enter | Enter submodule. After entering the submodule, you can press `<esc>` to escape back to the parent repo. |
| `` d `` | Remover | Remove the selected submodule and its corresponding directory. |
| `` u `` | Update | Update selected submodule. |
| `` n `` | New submodule | |
| `` e `` | Update submodule URL | |
| `` i `` | Initialize | Initialize the selected submodule to prepare for fetching. You probably want to follow this up by invoking the 'update' action to fetch the submodule. |
| `` d `` | Remover | Remova o submódulo selecionado e o diretório correspondente. |
| `` i `` | Inicializar | Initialize the selected submodule to prepare for fetching. You probably want to follow this up by invoking the 'update' action to fetch the submodule. |
| `` b `` | View bulk submodule options | |
| `` / `` | Filter the current view by text | |
| `` / `` | Filtrar a visualização atual por texto | |
## Sumário do commit
@@ -403,12 +406,12 @@ _Legend: `<c-b>` means ctrl+b, `<a-b>` means alt+b, `B` means shift+b_
| `` <enter> `` | Confirmar | |
| `` <esc> `` | Fechar | |
## Worktrees
## Árvores de trabalho
| Key | Action | Info |
|-----|--------|-------------|
| `` n `` | New worktree | |
| `` <space> `` | Switch | Switch to the selected worktree. |
| `` n `` | Nova árvore de trabalho | |
| `` <space> `` | Switch | Mudar para a árvore de trabalho selecionada. |
| `` o `` | Abrir no editor | |
| `` d `` | Remover | Remove the selected worktree. This will both delete the worktree's directory, as well as metadata about the worktree in the .git directory. |
| `` / `` | Filter the current view by text | |
| `` / `` | Filtrar a visualização atual por texto | |
| `` @ `` | Открыть меню журнала команд | View options for the command log e.g. show/hide the command log and focus the command log. |
| `` P `` | Отправить изменения | Push the current branch to its upstream branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
| `` p `` | Получить и слить изменения | Pull changes from the remote for the current branch. If no upstream is configured, you will be prompted to configure an upstream branch. |
@@ -19,20 +17,21 @@ _Связки клавиш_
| `` } `` | Увеличить размер контекста, отображаемого вокруг изменений в просмотрщике сравнении | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | Уменьшите размер контекста, отображаемого вокруг изменений в просмотрщике сравнении | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` m `` | Просмотреть параметры слияния/перебазирования | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | Обновить | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | Следующий режим экрана (нормальный/полуэкранный/полноэкранный) | |
| `` _ `` | Предыдущий режим экрана | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | Отменить | |
| `` ? `` | Открыть меню | |
| `` <c-s> `` | Просмотреть параметры фильтрации по пути | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | Открыть меню сравнении | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | Открыть меню сравнении | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | Выйти | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | Переключить отображение изменении пробелов в просмотрщике сравнении | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+s> `` | Просмотреть параметры фильтрации по пути | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | Открыть меню сравнении | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | Выйти | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | Переключить отображение изменении пробелов в просмотрщике сравнении | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <alt+shift+c> `` | Редактировать файл конфигурации | Open file in external editor. |
| `` z `` | Отменить (через reflog) (экспериментальный) | Журнал ссылок (reflog) будет использоваться для определения того, какую команду git запустить, чтобы отменить последнюю команду git. Сюда не входят изменения в рабочем дереве; учитываются только коммиты. |
| `` Z `` | Повторить (через reflog) (экспериментальный) | Журнал ссылок (reflog) будет использоваться для определения того, какую команду git нужно запустить, чтобы повторить последнюю команду git. Сюда не входят изменения в рабочем дереве; учитываются только коммиты. |
@@ -42,11 +41,11 @@ _Связки клавиш_
|-----|--------|-------------|
| `` , `` | Предыдущая страница | |
| `` . `` | Следующая страница | |
| `` < (<home>) `` | Пролистать наверх | |
| `` > (<end>) `` | Прокрутить вниз | |
| `` <, <home> `` | Пролистать наверх | |
| `` >, <end> `` | Прокрутить вниз | |
| `` v `` | Переключить выборку перетаскивания | |
| `` <s-down> `` | Range select down | |
| `` <s-up> `` | Range select up | |
| `` <shift+down> `` | Range select down | |
| `` <shift+up> `` | Range select up | |
| `` / `` | Найти | |
| `` H `` | Прокрутить влево | |
| `` L `` | Прокрутить вправо | |
@@ -82,11 +81,11 @@ _Связки клавиш_
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | Выбрать предыдущую часть | |
| `` <right> `` | Выбрать следующую часть | |
| `` <left>, h `` | Выбрать предыдущую часть | |
| `` <right>, l `` | Выбрать следующую часть | |
| `` v `` | Переключить выборку перетаскивания | |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | Скопировать выделенный текст в буфер обмена | |
| `` <ctrl+o> `` | Скопировать выделенный текст в буфер обмена | |
| `` <space> `` | Переключить индекс | Переключить строку в проиндексированные / непроиндексированные |
| `` d `` | Отменить изменение (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` o `` | Открыть файл | Open file in default application. |
@@ -97,15 +96,15 @@ _Связки клавиш_
| `` c `` | Сохранить изменения | Commit staged changes. |
| `` w `` | Закоммитить изменения без предварительного хука коммита | |
| `` C `` | Сохранить изменения с помощью редактора git | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` <esc> `` | Выйти из сборщика пользовательских патчей | |
| `` / `` | Найти | |
@@ -145,31 +145,32 @@ _Связки клавиш_
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Скопировать hash коммита в буфер обмена | |
| `` n `` | Создать новую ветку с этого коммита | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` s `` | Объединить коммиты (Squash) | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | Объединить несколько коммитов в один отбросив сообщение коммита (Fixup) | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | Перефразировать коммит | Reword the selected commit's message. |
| `` R `` | Переписать коммит с помощью редактора | |
| `` d `` | Удалить коммит | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
@@ -178,41 +179,44 @@ _Связки клавиш_
| `` p `` | Pick | Выбрать коммит (в середине перебазирования) |
| `` F `` | Создать fixup коммит | Создать fixup коммит для этого коммита |
| `` S `` | Apply fixup commits | Объединить все 'fixup!' коммиты выше в выбранный коммит (автосохранение) |
| `` <c-j> `` | Переместить коммит вниз на один | |
| `` <c-k> `` | Переместить коммит вверх на один | |
| `` <ctrl+j>, <alt+down> `` | Переместить коммит вниз на один | |
| `` <ctrl+k>, <alt+up> `` | Переместить коммит вверх на один | |
| `` B `` | Mark as base commit for rebase | Select a base commit for the next rebase. When you rebase onto a branch, only commits above the base commit will be brought across. This uses the `git rebase --onto` command. |
| `` A `` | Amend | Править последний коммит с проиндексированными изменениями |
| `` a `` | Установить/убрать автора коммита | Set/Reset commit author or set co-author. |
| `` t `` | Revert | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | Пометить коммит тегом | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | Открыть меню журнала | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <ctrl+l> `` | Открыть меню журнала | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | Переключить | Checkout the selected commit as a detached HEAD. |
| `` n `` | Создать новую ветку с этого коммита | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` o `` | Создать запрос на принятие изменений | |
| `` O `` | Создать параметры запроса принятие изменений | |
| `` <c-y> `` | Скопировать URL запроса на принятие изменений в буфер обмена | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | Скопировать URL запроса на принятие изменений в буфер обмена | |
| `` c `` | Переключить по названию | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | Принудительное переключение | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
@@ -225,10 +229,9 @@ _Связки клавиш_
| `` g `` | Просмотреть параметры сброса | |
| `` R `` | Переименовать ветку | |
| `` u `` | View upstream options | View options relating to the branch's upstream e.g. setting/unsetting the upstream and resetting to the upstream. |
| `` n `` | Создать новую ветку с этого коммита | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | Скопировать отобранные коммит (cherry-pick) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <space> `` | Переключить файлы включённые в патч | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | Переключить все файлы, включённые в патч | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | Введите файл, чтобы добавить выбранные строки в патч (или свернуть каталог переключения) | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
@@ -306,52 +309,52 @@ _Связки клавиш_
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Найти | |
| `` / `` | Filter the current view by text | |
## Статус
| Key | Action | Info |
|-----|--------|-------------|
| `` o `` | Открыть файл конфигурации | Open file in default application. |
| `` e `` | Редактировать файл конфигурации | Open file in external editor. |
| `` u `` | Проверить обновления | |
| `` <enter> `` | Переключиться на последний репозиторий | |
| `` a `` | Show/cycle all branch logs | |
| `` A `` | Show/cycle all branch logs (reverse) | |
| `` 0 `` | Focus main view | |
## Теги
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | Copy tag to clipboard | |
| `` <ctrl+o> `` | Copy tag to clipboard | |
| `` <space> `` | Переключить | Checkout the selected tag as a detached HEAD. |
| `` n `` | Создать тег | Create new tag from current commit. You'll be prompted to enter a tag name and optional description. |
| `` w `` | New worktree | |
| `` d `` | Delete | View delete options for local/remote tag. |
| `` P `` | Отправить тег | Push the selected tag to a remote. You'll be prompted to select a remote. |
| `` g `` | Reset | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` <c-o> `` | Скопировать название ветки в буфер обмена | |
| `` <ctrl+o> `` | Скопировать название ветки в буфер обмена | |
| `` <space> `` | Переключить | Checkout a new local branch based on the selected remote branch, or the remote branch as a detached head. |
| `` n `` | Новая ветка | |
| `` w `` | New worktree | |
| `` M `` | Слияние с текущей переключённой веткой | View options for merging the selected item into the current branch (regular merge, squash merge) |
| `` r `` | Перебазировать переключённую ветку на эту ветку | Rebase the checked-out branch onto the selected branch. |
| `` d `` | Delete | Delete the remote branch from the remote. |
| `` u `` | Set as upstream | Установить как upstream-ветку переключённую ветку |
| `` s `` | Порядок сортировки | |
| `` g `` | Просмотреть параметры сброса | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` c `` | Сохранить изменения | Commit staged changes. |
| `` w `` | Закоммитить изменения без предварительного хука коммита | |
| `` A `` | Правка последнего коммита | |
| `` C `` | Сохранить изменения с помощью редактора git | |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` e `` | Edit | Open file in external editor. |
| `` o `` | Открыть файл | Open file in default application. |
| `` D `` | Reset | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | Переключить вид дерева файлов | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` f `` | Получить изменения | Fetch changes from remote. |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
| `` = `` | Expand all files | Expand all directories in the file tree |
| `` 0 `` | Focus main view | |
| `` / `` | Найти | |
| `` / `` | Filter the current view by text | |
## Хранилище
@@ -407,8 +410,8 @@ _Связки клавиш_
| `` g `` | Применить припрятанные изменения и тут же удалить их из хранилища | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | Удалить припрятанные изменения из хранилища | Remove the stash entry from the stash list. |
| `` n `` | Новая ветка | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` P `` | 推送 | 推送当前分支到它的上游。如果上游未配置，您可以在弹窗中配置上游分支。 |
| `` p `` | 拉取 | 从当前分支的远程分支获取改动。如果上游未配置，您可以在弹窗中配置上游分支。 |
| `` ) `` | 提高重命名相似度阈值 | Increase the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` ( `` | 降低重命名相似度阈值 | Decrease the similarity threshold for a deletion and addition pair to be treated as a rename.<br><br>The default can be changed in the config file with the key 'git.renameSimilarityThreshold'. |
| `` } `` | 扩大差异视图中显示的上下文范围 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | 缩小差异视图中显示的上下文范围 | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` <c-w> `` | 切换是否在差异视图中显示空白字符差异 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` y `` | 复制提交属性到剪贴板 | 复制提交属性到剪贴板(如hash、URL、diff、消息、作者)。 |
| `` o `` | 在浏览器中打开提交 | |
| `` n `` | 从提交创建新分支 | |
| `` N `` | 移动提交至新分支 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` y `` | 复制提交属性到剪贴板 | 复制提交属性到剪贴板(如hash、URL、diff、消息、作者)。 |
| `` o `` | 在浏览器中打开提交 | |
| `` n `` | 从提交创建新分支 | |
| `` N `` | 移动提交至新分支 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | 移动提交至新分支 | 创建一个新分支，并将当前分支未推送的提交移动到该分支。如果您打算开始新工作但忘记先创建新分支，这会很有用。<br><br>请注意，此操作忽略选择，新分支总是从主分支创建或堆叠在当前分支之上（您可以选择哪种方式）。 |
| `` y `` | 复制提交属性到剪贴板 | 复制提交属性到剪贴板(如hash、URL、diff、消息、作者)。 |
| `` o `` | 在浏览器中打开提交 | |
| `` n `` | 从提交创建新分支 | |
| `` N `` | 移动提交至新分支 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | 移动提交至新分支 | 创建一个新分支，并将当前分支未推送的提交移动到该分支。如果您打算开始新工作但忘记先创建新分支，这会很有用。<br><br>请注意，此操作忽略选择，新分支总是从主分支创建或堆叠在当前分支之上（您可以选择哪种方式）。 |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` <ctrl+t> `` | 使用外部差异比较工具(git difftool) | |
| `` M `` | 查看合并冲突选项 | 查看用于解决合并冲突的选项。 |
| `` f `` | 抓取 | 从远程获取变更 |
| `` - `` | 折叠全部文件 | 折叠文件树中的全部目录 |
| `` = `` | 展开全部文件 | 展开文件树中的全部目录 |
| `` 0 `` | 聚焦主视图 | |
| `` / `` | 开始搜索 | |
| `` / `` | 通过文本过滤当前视图 | |
## 本地分支
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | 复制分支名称到剪贴板 | |
| `` <ctrl+o> `` | 复制分支名称到剪贴板 | |
| `` i `` | 显示 git-flow 选项 | |
| `` <space> `` | 检出 | 检出选中的项目 |
| `` n `` | 新分支 | |
| `` N `` | 移动提交至新分支 | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` N `` | 移动提交至新分支 | 创建一个新分支，并将当前分支未推送的提交移动到该分支。如果您打算开始新工作但忘记先创建新分支，这会很有用。<br><br>请注意，此操作忽略选择，新分支总是从主分支创建或堆叠在当前分支之上（您可以选择哪种方式）。 |
| `` w `` | 新建工作树 | |
| `` o `` | 创建拉取请求 | |
| `` O `` | 创建拉取请求选项 | |
| `` <c-y> `` | 复制拉取请求 URL 到剪贴板 | |
| `` G `` | 在浏览器中打开拉取请求 | |
| `` <ctrl+y> `` | 复制拉取请求 URL 到剪贴板 | |
| `` c `` | 按名称检出 | 按名称检出。在输入框中，您可以输入'-' 来切换到最后一个分支。 |
| `` - `` | 签出上一个分支 | |
| `` F `` | 强制检出 | 强制检出所选分支。这将在检出所选分支之前放弃工作目录中的所有本地更改。 |
| `` d `` | 删除 | 查看本地/远程分支的删除选项 |
| `` r `` | 变基 | 将检出的分支变基到所选的分支上。 |
| `` M `` | 合并到当前检出的分支 | Merge selected branch into currently checked out branch. |
| `` M `` | 合并到当前检出的分支 | 查看将选中项合并到当前分支的选项(正常合并，压缩合并) |
| `` f `` | 从上游快进此分支 | 将当前分支直接移动到远程追踪分支的最新提交 |
| `` T `` | 创建标签 | |
| `` s `` | 排序 | |
| `` g `` | 查看重置选项 | |
| `` R `` | 重命名分支 | |
| `` u `` | 查看上游选项 | 查看与分支上游相关的选项，例如设置/取消设置上游和重置为上游。 |
| `` <c-t> `` | 使用外部差异比较工具(git difftool) | |
| `` <ctrl+t> `` | 使用外部差异比较工具(git difftool) | |
| `` 0 `` | 聚焦主视图 | |
| `` <enter> `` | 查看提交 | |
| `` w `` | 查看工作区选项 | |
| `` / `` | 通过文本过滤当前视图 | |
## 构建补丁中
| Key | Action | Info |
|-----|--------|-------------|
| `` <left> `` | 选择上一个区块 | |
| `` <right> `` | 选择下一个区块 | |
| `` <left>, h `` | 选择上一个区块 | |
| `` <right>, l `` | 选择下一个区块 | |
| `` v `` | 切换拖动选择 | |
| `` a `` | 切换代码块选择 | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 复制选中文本到剪贴板 | |
| `` a `` | 切换代码块选择 | 切换逐行选择与代码块选择模式。 |
| `` <ctrl+o> `` | 复制选中文本到剪贴板 | |
| `` o `` | 打开文件 | 使用默认程序打开该文件 |
| `` e `` | 编辑文件 | 使用外部编辑器打开文件 |
| `` <space> `` | 添加/移除 行到补丁 | |
| `` d `` | 从提交中移除行 | 从本次提交中移除所选行。此操作会在后台运行交互式变基，因此如果后续提交也修改了这些行，您可能会遇到合并冲突。 |
| `` } `` | 增加差異檢視中顯示變更周圍上下文的大小 | Increase the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` { `` | 減小差異檢視中顯示變更周圍上下文的大小 | Decrease the amount of the context shown around changes in the diff view.<br><br>The default can be changed in the config file with the key 'git.diffContextSize'. |
| `` : `` | Execute shell command | Bring up a prompt where you can enter a shell command to execute. |
| `` <c-p> `` | 檢視自訂補丁選項 | |
| `` <ctrl+p> `` | 檢視自訂補丁選項 | |
| `` m `` | 查看合併/變基選項 | View options to abort/continue/skip the current merge/rebase. |
| `` R `` | 重新整理 | Refresh the git state (i.e. run `git status`, `git branch`, etc in background to update the contents of panels). This does not run `git fetch`. |
| `` + `` | 下一個螢幕模式（常規/半螢幕/全螢幕） | |
| `` _ `` | 上一個螢幕模式 | |
| `` \| `` | Cycle pagers | Choose the next pager in the list of configured pagers |
| `` \| `` | Cycle diff renderers | Choose the next renderer in the list of configured diff renderers. |
| `` \ `` | Cycle diff renderers (reverse) | Choose the previous renderer in the list of configured diff renderers. |
| `` <esc> `` | 取消 | |
| `` ? `` | 開啟選單 | |
| `` <c-s> `` | 檢視篩選路徑選項 | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` <c-e> `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q `` | 結束 | |
| `` <c-z> `` | Suspend the application | |
| `` <c-w> `` | 切換是否在差異檢視中顯示空格變更 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` <ctrl+s> `` | 檢視篩選路徑選項 | View options for filtering the commit log, so that only commits matching the filter are shown. |
| `` W, <ctrl+e> `` | 開啟差異比較選單 | View options relating to diffing two refs e.g. diffing against selected ref, entering ref to diff against, and reversing the diff direction. |
| `` q, <ctrl+c> `` | 結束 | |
| `` <ctrl+z> `` | Suspend the application | |
| `` <ctrl+w> `` | 切換是否在差異檢視中顯示空格變更 | Toggle whether or not whitespace changes are shown in the diff view.<br><br>The default can be changed in the config file with the key 'git.ignoreWhitespaceInDiffView'. |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 複製所選文本至剪貼簿 | |
| `` <ctrl+o> `` | 複製所選文本至剪貼簿 | |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` e `` | 編輯檔案 | 使用外部編輯器開啟 |
| `` <space> `` | 向 (或從) 補丁中添加/刪除行 | |
| `` d `` | Remove lines from commit | Remove the selected lines from this commit. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes these lines. |
| `` a `` | Toggle hunk selection | Toggle line-by-line vs. hunk selection mode. |
| `` <c-o> `` | 複製所選文本至剪貼簿 | |
| `` <ctrl+o> `` | 複製所選文本至剪貼簿 | |
| `` <space> `` | 切換預存 | 切換現有行的狀態 (已預存/未預存) |
| `` d `` | 刪除變更 (git reset) | When unstaged change is selected, discard the change using `git reset`. When staged change is selected, unstage the change. |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <c-r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <c-t> `` | 開啟外部差異工具 (git difftool) | |
| `` <ctrl+r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` * `` | Select commits of current branch | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | 檢視所選項目的檔案 | |
| `` w `` | 檢視工作目錄選項 | |
| `` / `` | 搜尋 | |
## 子模組
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | 複製子模組名稱到剪貼簿 | |
| `` <ctrl+o> `` | 複製子模組名稱到剪貼簿 | |
| `` <enter> `` | Enter | 進入子模組 |
| `` d `` | Remove | Remove the selected submodule and its corresponding directory. |
| `` s `` | 壓縮 (Squash) | Squash the selected commit into the commit below it. The selected commit's message will be appended to the commit below it. |
| `` f `` | 修復 (Fixup) | Meld the selected commit into the commit below it. Similar to squash, but the selected commit's message will be discarded. |
| `` c `` | Set fixup message | Set the message option for the fixup commit. The -C option means to use this commit's message instead of the target commit's message. |
| `` r `` | 改寫提交 | 改寫選中的提交訊息 |
| `` R `` | 使用編輯器改寫提交 | |
| `` d `` | 刪除提交 | Drop the selected commit. This will remove the commit from the branch via a rebase. If the commit makes changes that later commits depend on, you may need to resolve merge conflicts. |
| `` B `` | 為了變基已標注提交為基準提交 | 請為了下一次變基選擇一項基準提交；此將執行 `git rebase --onto`。 |
| `` A `` | 修改 | 使用已預存的更改修正提交 |
| `` a `` | 設定/重設提交作者 | Set/Reset commit author or set co-author. |
| `` t `` | 還原 | Create a revert commit for the selected commit, which applies the selected commit's changes in reverse. |
| `` T `` | 打標籤到提交 | Create a new tag pointing at the selected commit. You'll be prompted to enter a tag name and optional description. |
| `` <c-l> `` | 開啟記錄選單 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` <ctrl+l> `` | 開啟記錄選單 | View options for commit log e.g. changing sort order, hiding the git graph, showing the whole git graph. |
| `` G `` | Open pull request in browser | |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` d `` | Remove | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` d `` | 捨棄 | Discard this commit's changes to this file. This runs an interactive rebase in the background, so you may get a merge conflict if a later commit also changes this file. |
| `` o `` | 開啟檔案 | 使用預設軟體開啟 |
| `` e `` | 編輯 | 使用外部編輯器開啟 |
| `` <c-t> `` | 開啟外部差異工具 (git difftool) | |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` <space> `` | 切換檔案是否包含在補丁中 | Toggle whether the file is included in the custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` a `` | 切換所有檔案是否包含在補丁中 | Add/remove all commit's files to custom patch. See https://github.com/jesseduffield/lazygit#rebase-magic-custom-patches. |
| `` <enter> `` | 輸入檔案以將選定的行添加至補丁（或切換目錄折疊） | If a file is selected, enter the file so that you can add/remove individual lines to the custom patch. If a directory is selected, toggle the directory. |
| `` g `` | 還原 | Apply the stash entry to your working directory and remove the stash entry. |
| `` d `` | 捨棄 | Remove the stash entry from the stash list. |
| `` n `` | 新分支 | Create a new branch from the selected stash entry. This works by git checking out the commit that the stash entry was created from, creating a new branch from that commit, then applying the stash entry to the new branch as an additional commit. |
| `` <space> `` | 檢出 | Checkout the selected commit as a detached HEAD. |
| `` y `` | 複製提交屬性 | Copy commit attribute to clipboard (e.g. hash, URL, diff, message, author). |
| `` o `` | 在瀏覽器中開啟提交 | |
| `` n `` | 從提交建立新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` g `` | 檢視重設選項 | View reset options (soft/mixed/hard) for resetting onto selected item. |
| `` C `` | 複製提交 (揀選) | Mark commit as copied. Then, within the local commits view, you can press `V` to paste (cherry-pick) the copied commit(s) into your checked out branch. At any time you can press `<esc>` to cancel the selection. |
| `` <c-r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <c-t> `` | 開啟外部差異工具 (git difftool) | |
| `` <ctrl+r> `` | 重設選定的揀選 (複製) 提交 | |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` * `` | Select commits of current branch | |
| `` 0 `` | Focus main view | |
| `` <enter> `` | 檢視提交 | |
| `` w `` | 檢視工作目錄選項 | |
| `` / `` | 搜尋 | |
## 本地分支
| Key | Action | Info |
|-----|--------|-------------|
| `` <c-o> `` | 複製分支名稱到剪貼簿 | |
| `` <ctrl+o> `` | 複製分支名稱到剪貼簿 | |
| `` i `` | 顯示 git-flow 選項 | |
| `` <space> `` | 檢出 | 檢出選定的項目。 |
| `` n `` | 新分支 | |
| `` N `` | Move commits to new branch | Create a new branch and move the unpushed commits of the current branch to it. Useful if you meant to start new work and forgot to create a new branch first.<br><br>Note that this disregards the selection, the new branch is always created either from the main branch or stacked on top of the current branch (you get to choose which). |
| `` w `` | New worktree | |
| `` o `` | 建立拉取請求 | |
| `` O `` | 建立拉取請求選項 | |
| `` <c-y> `` | 複製拉取請求的 URL 到剪貼板 | |
| `` G `` | Open pull request in browser | |
| `` <ctrl+y> `` | 複製拉取請求的 URL 到剪貼板 | |
| `` c `` | 根據名稱檢出 | Checkout by name. In the input box you can enter '-' to switch to the previous branch. |
| `` - `` | Checkout previous branch | |
| `` F `` | 強制檢出 | Force checkout selected branch. This will discard all local changes in your working directory before checking out the selected branch. |
| `` <c-f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` <ctrl+f> `` | Find base commit for fixup | Find the commit that your current changes are building upon, for the sake of amending/fixing up the commit. This spares you from having to look through your branch's commits one-by-one to see which commit should be amended/fixed up. See docs: <https://github.com/jesseduffield/lazygit/tree/master/docs/Fixup_Commits.md> |
| `` D `` | 重設 | View reset options for working tree (e.g. nuking the working tree). |
| `` ` `` | 顯示檔案樹狀視圖 | Toggle file view between flat and tree layout. Flat layout shows all file paths in a single list, tree layout groups files by directory.<br><br>The default can be changed in the config file with the key 'gui.showFileTree'. |
| `` <c-t> `` | 開啟外部差異工具 (git difftool) | |
| `` <ctrl+t> `` | 開啟外部差異工具 (git difftool) | |
| `` M `` | View merge conflict options | View options for resolving merge conflicts. |
| `` f `` | 擷取 | 同步遠端異動 |
| `` - `` | Collapse all files | Collapse all directories in the files tree |
// the price of having a convenient interface where we can say .New(...).Run() is that our builder now depends on our runner, so when we want to wrap the default builder/runner in new functionality we need to jump through some hoops. We could avoid the use of a decorator function here by just exporting the runner field on the default builder but that would be misleading because we don't want anybody using that to run commands (i.e. we want there to be a single API used across the codebase)
// here we're wrapping the default command runner in some git-specific stuff e.g. retry logic if we get an error due to the presence of .git/index.lock
const(
WaitTime=50*time.Millisecond
RetryCount=5
// defaultInitialRetryDelay is how long we wait before the first retry of a
// command that failed with a transient lock error. We double it before each
// subsequent retry (see retryOnLockError), so across maxRetries attempts we
// wait for a bit over a second in total. That's long enough to outlast the
// brief window during which another git process holds a lock we need —
// typically our own foreground `git status` refresh, which takes index.lock
// to persist its refreshed stat-cache.
defaultInitialRetryDelay=20*time.Millisecond
maxRetries=7
)
typegitCmdObjRunnerstruct{
log*logrus.Entry
innerRunneroscommands.ICmdObjRunner
// initialRetryDelay is the wait before the first lock-error retry. It's a
// field rather than the constant directly so tests can set it to zero and
// not actually sleep.
initialRetryDelaytime.Duration
}
// isRetryableError returns true if a failed command hit a transient
// lock-related condition that may succeed on retry. The lock message can reach
// us either in the command's captured output or, for streamed commands whose
// output we don't capture, only in the returned error, so we check both.
//
// We match the bare "index.lock" fragment rather than a fuller path or message
// so we catch the lock wherever git puts it: the main .git dir, a linked
// worktree's git dir (.git/worktrees/<name>/index.lock), or a submodule's git
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Stefan Haller
dependabot[bot]
Tyce Herrman
Henry Maddocks
Antoine Gaudreau Simard
stk
majiayu000
Bradly Chang
Ubuntu
Martin T.
Jesse DuffieldandStefan Haller
github-actions[bot]
dagecko
phanium
Matthijs Kooijman
rohan436
John Yeates
Miika Tuominen
blakemckeanyandStefan Haller
Ruud Kamphuis
Zak Siddiqui
04cb
cobyfrombrooklyn-bot
Daniel Wennberg
Owen Zimmerman
baiyei_dk
cadamsdev
Dawid Pietrykowski
Padraic Slattery
mricherzhagen
Karl Wikström
Yadi Abdalhalim
Peter Cardenas